5900-104 Annual Report - Production Segment

---

Overview

Partner Info and ToC
Dehydrator Vents
Pneumatic Controllers
Additional Activities
references

---

Sheet 1: Partner Info and ToC

Natural Gas STAR Annual Report - Production Segment			Production
FORM VERSION: REPORTING SEASON 2021 (for activities completed in 2020)			OMB Control No. 2060-0722 Approval expires XX/XX/202X EPA Form No. 5900-99
RS2021PRODv1
Partner Name			0
Reporting Year	2020
Use the Table of Contents below to navigate to the different tabs of the form. You can use column B to indicate if you reported data on a specific tab.
Production Emission Sources	Data Reported	Information
Dehydrator Vents	No	Install flash tank separators on glycol dehydrator vents
Pneumatic Controllers	No	Convert high-bleed controllers to low-bleed; convert high-bleed or low-bleed controllers to zero-emitting controllers; remove controllers from service with no replacement
Additional Production Activities	No	Use this tab to report all other methane reductions in the Production segment. You will be able to select the technology/practice used from the list of Natural Gas STAR Partner Reported Opportunities. If the activity you are reporting is not included in the list, please contact EPA at [email protected]
Update Partner Information (If applicable)
New Partner Name
This collection of information is approved by OMB under the Paperwork Reduction Act, 44 U.S.C. 3501 et seq. (OMB Control No. 2060-0328). Responses to this collection of information are voluntary 42 USC 7403(g). An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB control number. The public reporting and recordkeeping burden for this collection of information is estimated to range from 20 to 51 hours per response. Send comments on the Agency’s need for this information, the accuracy of the provided burden estimates and any suggested methods for minimizing respondent burden to the Regulatory Support Division Director, U.S. Environmental Protection Agency (2821T), 1200 Pennsylvania Ave., NW, Washington, D.C. 20460. Include the OMB control number in any correspondence. Do not send the completed form to this address.

---

Sheet 2: Dehydrator Vents

Dehydrator Vents								Return to Table of Contents
Install Flash Tank Separators on Glycol Dehydrators
Start Year	Eligible Sunset Years for this Activity	Automatically calculate sunsets?	End Year	New or Ongoing?	Calculation Method: Default, Standard, or Other	Calculate Using Default			Calculate Using Standard Calculation				Other Calculation		Provide additional comments or detail about how your company implemented this BMP
						Number of Flash Tank Separators Installed	Average Gas Throughput (MMcf/yr)	Calculated Total Methane Emission Reduction Based on Default Values {[Number of Flash Tank Separators Installed]x[Average Gas Throughput]) x 170 scf/MMcf x 0.9] / 1000]}	TEG Circulation Rate (gal/hr)	Methane Entrainment Rate (scf/gal)	Hours of Operation (hrs/yr)	Calculated Total Methane Emission Reduction Based on Standard Calculation {[TEG Circulation Rate]x [Methane Entrainment Rate]x[Hours of Operation] x 0.9] / 1000}	Total Methane Emission Reduction Based on Other Assumptions (Mcf/yr)	Explain Reduction Calculation Used
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0
								0				0

---

Sheet 3: Pneumatic Controllers

Pneumatic Controllers					Return to Table of Contents
Convert high-bleed controllers to low-bleed; convert high-bleed or low-bleed controllers to zero-emitting controllers; remove controllers from service with no replacement
				Convert high-bleed to low-bleed		Convert high-bleed to zero-bleed/remove from service		Convert low-bleed to zero-bleed/remove from service
Start Year	New or Ongoing?	Average Methane Content of Gas (enter as a decimal; leave blank to use default 82.1% methane)	Average annual operating hours (leave blank to use default 8760 hours)	Number of controllers converted	Calculated Total Methane Emission Reductions (Mcf/yr)	Number of controllers converted/removed from service	Calculated Total Methane Emission Reductions (Mcf/yr)	Number of controllers converted/removed from service	Calculated Total Methane Emission Reductions (Mcf/yr)	Provide additional comments or detail about how your company implemented this BMP

---

Sheet 4: Additional Activities

Additional Production Activities							Return to Table of Contents
Start Year	Select the Activity	New or Ongoing?	Eligible Sunset Years for this Activity	Automatically calculate sunsets (if Sunset Years >1)?	End Year	Total Methane Emission Reduction (Mcf/yr)	Basis for Emission Reduction Estimate	Explain Reduction Calculation Used	Describe how your company implemented this activity (e.g., number of units installed or other activities conducted)

---

Sheet 5: references

This sheet summarizes values used in calculations in this workbook. If you have questions on any of the values used, please contact EPA at [email protected]
Install Flash Tank Separators on Glycol Dehydrators
Default Values
Emission Factor1	170	scf/MMcfd
Efficiency2	0.9	percent (expressed as decimal)
Pneumatic Controllers
Emission Factors	Source: 40 CFR 98, Table W-1A (Population Emission Factors, Gas Service)
Low Continuous Bleed Pneumatic Device Vents	1.39	scf whole gas / hr / device
High Continuous Bleed Pneumatic Device Vents	37.3	scf whole gas / hr / device
Default Values
Operating hours	8760	Assumes 24/7 operation all year
Methane content of natural gas	82.1%	Inventory of U.S. Greenhouse Gas Emissions and Sinks: 1990-2016, Annex 3.6 (Table 3.6-3), https://www.epa.gov/sites/production/files/2018-04/2018_ghgi_natural_gas_systems_annex_tables.xlsx
Notes:
1 Derived from “Methane Emissions from the Natural Gas Industry,” Volume 14, Glycol Dehydrators, co-sponsored by the Gas Research Institute and EPA, June 1996.
2 Derived from “Optimize Glycol Circulation And Install Flash Tank Separators In Glycol Dehydrators” Lessons Learned document, EPA, October 2006.