North Primary Non-Pulp Board

1262147

1.1 Company Name and Address
Instructions
Please enter the mill information below

1262147

A. Mill Name

B. Mill Phone #

Mailing Address:
E. State

C. Street

D. City

G. Mill Website

H. Mill/Company Email

F. Zip Code

I. Parent Company Name (if different from "Mill Name" above)

Parent Company Mailing Address (if different from "Mailing Address" above):
J. Street

K. City

L. State

M. Zip Code

C. State

D. Zip Code

Instructions

1.2 Mill's Physical Address (if different from Mailing Address above)

A. Street

B. City

1.3 Contact Information
Instructions
A. Contact First Name

B. Contact Last Name

D. Contact Phone

C. Contact Title

E. Contact Email

1.4 Mill Type
Instructions
A. Check the box that indicates the type of Roundwood received at the mill for processing. If more than one Mill Type operates
at this site, complete a separate survey for each Mill Type. Refer to Section 3.1 for Products Produced by Mill Type.
Sawmill

Veneer Mill

Industrial Fuelwood

Cabin/House Mill

Pole Mill

Post Mill

Piling Mill

Other/Miscellaneous Mill Type (specify):

1.5 Mill Status
Instructions
A. What was the status of the mill in 2021?
Active
Idle
Closed/Out of Business

Dismantled

B. Did the mill receive any raw material (logs/roundwood) in 2021?
Yes
No
If no, there are no additional questions for you. Please just
return the form in the postage-paid envelope provided.

1.6 Mill Information
Instructions
A. How many employees (full-time equivalents) were
working at the mill in 2021?

B. What is the annual output capacity of finished product
for this mill when it is operating at full capacity?
Please round to a whole number & specify units

Units:

2.1 Total Volume of Roundwood Received in 2021
Instructions
1262147
A. What is the total volume of roundwood received for the "Mill Type" indicated in Section 1.4?
Exclude unprocessed logs or bolts sold/transferred to other domestic primary processing plants or exported out of the country.

Total Volume:

Unit of Measure (check one):
MBF Doyle
BF Doyle
MBF Scribner
BF Scribner
MBF Int'l 1/4 In.
BF Int'l 1/4 In.
MBF Lumber Tally
BF Lumber Tally

B. If Unit of Measure is Green Tons or an "Other"
weight, enter a whole number weight conversion factor
below:
Softwoods

Standard Cord
Lake States Cord (100 in.)
Pieces
Thousand Pieces
Green Tons
Thousand Cubic Ft.
Other (specify below):

lbs. per MBF

OR
lbs. per Cord

Hardwoods
lbs. per MBF

OR

MBF = Thousand Board Feet
BF = Board Feet

lbs. per Cord

2.2 Log Dimensions

Instructions

B. What is the average top diameter (in inches) of wood
received at the mill?

A. What is the average log length (in feet) of wood
received at the mill?

..

..

ft.
2.3
Non-forest
Sources
in 2021
Instructions
A. Do you process any logs from cities or
towns (urban areas) at your mill?
Yes
No
Don't know/Unsure

in.

B. If yes, what percentage of the total roundwood
received was urban wood? Round to a whole percent.

%

2.4 Species of Roundwood Received in 2021

Instructions
A. Enter the volume of roundwood received by species & indicate Unit of Measure for the "Mill Type" checked in Section 1.4.
If providing Percent, calculate based on Total Volume from Section 2.1.
B. Unit of Measure:
Percent (%)
Unit indicated in Sec. 2.1
Amount/Percent of Total Volume

Amount/Percent of Total Volume

Other Unit (specify:)
Amount/Percent of Total Volume

Ash

Fir, balsam

Pine, white

Aspen/balsam poplar

Hemlock

Pine, other

Basswood

Hickory

Spruce

Beech

Maple, hard

Sweetgum

Birch, white

Maple, soft

Sycamore

Birch, yellow

Red Oak Group

Tamarack

Birch, other

White Oak Group

Tupelo/blackgum

Cedar/Juniper

Walnut, black

Cherry, black

Pine, Jack
Pine, longleaf/slash

Cottonwood

Pine, loblolly/shortleaf

Other HWs not listed

Cypress

Pine, ponderosa

Unknown/Undiff. HWs

Elm

Pine, red

Unknown/Undiff. SWs

HWs = Hardwoods, SWs = Softwoods, Undiff. = Undifferentiated.

Yellow-poplar

Other

specify below:

C. What percent of the received roundwood came from the state where the mill is located?

%
c. What percent of the roundwood processed came from other States/Countries? Please list State/Country on line provided.
State/Country 1

State/Country 3

%
State/Country 2

State/Country 4

%

%
%

2.5 Origin of Roundwood Received in 2021
Instructions
A. What was the average procurement radius (in miles) for roundwood received at the mill?

1262147

miles
B. Complete the Species Origin table for the Total Volume reported in Section 2.1.
- Provide County name as heading for columns below. If out of state, please specify State and County, or Country. Add
additional sheets as needed.
- For each species row, percentages (or amounts) across all columns should equal 100% (or the total species volume)
indicated in Section 2.4.
Origin 1
Origin 2
Origin 3
Origin 4
Origin 5
Origin 6
Origin 7
Origin 8

Ash
Aspen/balsam poplar
Basswood
Beech
Birch, white
Birch, yellow
Birch, other
Cedar/Juniper
Cherry, black
Cottonwood
Cypress
Elm
Fir, balsam
Hemlock
Hickory
Maple, hard
Maple, soft
Red oak group
White oak group
Pine, Jack
Pine, loblolly/shortleaf
Pine, longleaf/slash
Pine, ponderosa
Pine, red
Pine, white
Pine, other
Spruce
Sweetgum
Sycamore
Tamarack
Tupelo/blackgum
Walnut, black
Yellow-poplar
Other HWs not listed
Unknown/Undiff. HWs
Unknown/Undiff. SWs
Other (specify below):

Total:
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%

2.6
Exported Amounts in 2021
Instructions
A. Did the mill export any unprocessed logs out of the country in 2021?
Yes
No (skip to Section 3.1)
B. If yes, please enter species with associated amount exported, and
indicate Unit of Measure to the right.
Species #1:

Amount #1:

Species #2:

Amount #2:

Species #3:

Amount #3:

Species #4:

Amount #4:

Species #5:

Amount #5:

Species #6:

Amount #6:

1262147

C. Unit of Measure?
Unit of Measure indicated in Sec. 2.1
Other Unit (specify below):

3.1 Products Produced from Logs Received in 2021

Instructions
Enter the percent produced from logs received for the Products below associated with the "Mill Type" checked in Section 1.4 and
for "Other/Miscellaneous" Products produced from logs received, where applicable. The total for each group should equal 100%.
Example: 75% Siding/25% Cants = 100% (Saw Logs), 100% Mulch = 100% (Other/Misc).
Saw Logs
Veneer Logs
Rough/Grade Lumber

Crane Mats

Dimension/Stud Lumber

Lath/Stakes

Molding or Trim

Boxes
Veneer/Face Veneer

Flooring

Pallets/Pallet Lumber

Blocking/Dunnage

Timbers/Supports
Ties (Railroad Ties)

Tight Stave/Cooperage

Landscape Timbers

Other Sawn Products

Bioenergy/Fuelwood

Plywood

Cants

Siding

Furniture Stock

Sheathing

Other Veneer
specify:

House/Cabin Logs
Cabins/House Logs
Sawn House Logs
Turned House Logs

specify:

Hand-Peeled House Logs

Post, Poles, & Pilings

Pellets - Residential Grade

Pilings

Pellets - Torrefied

Poles - Utility

Trussses/Other House Log Prod.
Other House/Cabin Logs
specify:

Other/Miscellaneous Products

Pellets/briquettes - Industrial
Grade

Poles - Other

Mulch, Soil Additives, Compost

Pellets - Other

Residential fuelwood
Posts - Fencing

specify:
Industrial Fuelwood Electricity/Power

Shingles/Shakes

Posts - Other

Industrial Fuelwood
(co-gen, steam, etc.)

Round Railings

Industrial Fuelwood Heat/Steam

Log Furniture

Shavings/Excelsior
Handles/Blanks
Dowels/Blanks
Novelty
Foreign Export Logs

Other Energy Products
specify:

Split Rail Fencing

Other Post, Pole, Piling
Product
specify:

Other
specify:

3.2 Mill Equipment
Instructions
Complete only for the single "Mill Type" checked in Section 1.4

1262147

A. What type of head saw is used at the mill?
Check only the primary head rig
Band Saw

Gang Sawmill

Chip-N-Saw

Other (specify):

Circular Saw

Scragg Sawmill

Portable Band Saw

None

B. What other equipment does the mill have?
Check all that apply

Veneer

Sliced Veneer Equipment

Peeled Veneer Equipment

Other
Chipper

Debarker

Shaving Machine

Wood-Fired Boiler

Other (specify below):

Planer

Dry Kiln

Hammer Mill

Treating Equipment

None

Edger

Post/Pole Peeler

Firewood Processor

Optimizer Equipment

Instructions
3.3 Volume of Product Produced from Raw Material (Logs/Roundwood) Processed
in 2020
Please
enter the amount of finished product produced from the "Mill Type" checked in Section 1.4 by softwoods and hardwoods.

Softwoods
Products

Whole Number Amount

Unit of
Measure
(codes
below)

Percent
Dressed/
Planed
(if sawn
product)

Saw Log
Products

%

Hardwoods
Products

Whole Number Amount

Unit of
Measure
(codes
below)

Percent
Dressed/
Planed
(if sawn
product)

Saw Log
Products

%

Veneer
Log
Products

N/A

Veneer
Log
Products

N/A

House
Logs

N/A

House
Logs

N/A

Industrial
Fuelwood

N/A

Industrial
Fuelwood

N/A

Posts,
Poles, &
Pilings

N/A

Posts,
Poles, &
Pilings

N/A

Other (i.e.
Shavings)

N/A

Other (i.e..
Shavings)

N/A

1 - Lumber Tally (MBF)

Units of Measure
2 - Pieces 3 - Square Feet

4 - Other (specify):

4.1 Disposal of Bark and Wood Residues in 2021
Instructions
1262147

Enter the percent for each type of mill residue by softwoods and hardwoods and how it was disposed of, regardless of
whether it was sold, given away, or paid to dispose. The columns should sum 100%.
Complete only for the single "Mill Type" checked in Section 1.4
- Example:
Hardwood bark - 50% Mulch, 50% Residential fuelwood
Hardwood coarse - 50% Pulp/Paper/Composite products, 50% Residential fuelwood
Hardwood Sawdust - 100% Animal bedding

BARK

Disposal of
Mill Residues

COARSE
(Chips, slabs, edgings,
trims, cores, etc.)

Softwood
%

Hardwood
%

Softwood
%

100%

100%

100%

Hardwood
%

FINE

Shavings
(Planer or Lathe)
Softwood
%

Sawdust

Hardwood
%

Softwood
%

Hardwood
%

100%

100%

100%

Manufacture of pulp/paper/composite
products
Small dimension and other sawn
produccts
Charcoal or chemical wood
Industrial fuel at this plant
Industrial fuel at other locations
Bio-energy pellets
Other bio-energy products (biodiesel,
etc.)
Residential fuelwood
Mulch/soil additives (including
biochar)
Animal bedding
NOT USED (land fill, burned, etc.)

Other/misc. uses (specify below):

100%
100%
Column Totals

4.2 Volume of Hog Fuel/Industrial Fuelwood Received in 2021
Instructions
A. Did you receive any roundwood, in-woods chips, whole tree chips, or logging residues (not mill residues) at the mill that were
used for hog fuel, heat, power, or dry kilns?
Complete only for the single "Mill Type" checked in Section 1.4
Yes
No
B. If yes, enter amount by softwood & hardwood by origin. Indicate Unit of Measure of any roundwood, in-woods chips, whole
tree chips, or logging residues that the mill received for hog fuel, heat, power, or dry kilns, at the mill.
State or
foreign
Country of
Origin

Boiler/Hog Fuel Volume
Softwood
Enter amount in boxes below

Hardwood
Enter amount in boxes below

Unit of Measure
Check one
Green Tons
Thousand Cu. Ft.
Dry Tons
Other (Specify):

5.1 Directory Inclusion & Results
Instructions
1262147

A. Would you like to omit the mill contact information from Regional/Statewide Industry Directories?
(This will not remove you from the list of mills that may be surveyed in the future)
Yes

No

B. Would you like to receive a copy of the report resulting from this survey?
Yes

No

C. If yes, what is the best way for us to get the results to you?
Mailing address provided in Section 1.1
Different address (specify):
Email (specify):

Notes and Comments
Instructions
Please use the box below to record any information about the mill that may be helpful for interpreting
your responses. Also, please use this space to add comments on any questions/sections that needed more
instructions or were confusing, or if you have any suggestions on improving this questionnaire.

Thank you for participating in this survey!
Please return the questionnaire in the postage-paid envelope provided.