EDA Summary of Construction Standards July 2018

EDA Summary of Construction Standards - July 2018.pdf

Requirements for Approved Construction Investments

EDA Summary of Construction Standards July 2018

OMB: 0610-0096

Document [pdf]
Download: pdf | pdf
OMB Number: 0610-0096
Expiration Date: 11/30/2021

Back

UNITED STATES DEPARTMENT OF COMMERCE
ECONOMIC DEVELOPMENT ADMINISTRATION

SUMMARY OF EDA CONSTRUCTION STANDARDS
A REFERENCE TOOL FOR CONSTRUCTION INVESTMENTS
MADE UNDER SECTIONS 201 OR 209 OF THE
PUBLIC WORKS AND ECONOMIC DEVELOPMENT ACT OF 1965,
AS AMENDED (42 U.S.C. § 3121 ET SEQ.)

JULY 2018

OMB Number: 0610-0096
Expiration Date: 11/30/2021

TABLE OF CONTENTS
I.

PURPOSE AND SCOPE OF THIS SUMMARY............................................................................... 1
A. PURPOSE .................................................................................................................................... 1
B. SCOPE ......................................................................................................................................... 1

II. DEPARTMENT OF COMMERCE AND EDA POLICIES .............................................................. 2
III. REQUIREMENTS APPLICABLE TO EDA INVESTMENTS ...................................................... 2
A. GRANT RECIPIENT AS TRUSTEE .................................................................................... 2
B. THE RECIPIENT’S RESPONSIBILITIES........................................................................... 2
C. EMINENT DOMAIN ................................................................................................................. 3
D. RECORD-KEEPING REQUIREMENTS ................................................................................. 4
E. THE FINANCIAL ASSISTANCE AWARD ............................................................................ 4
F. FINANCIAL REPORTING................................................................................................... 4
G. MONITORING AND REPORTING PROJECT PROGRESS ................................................ 5
IV. PRE-CONSTRUCTION REQUIREMENTS.................................................................................. 6
A. ENVIRONMENTAL COMPLIANCE ...................................................................................... 6
B. CIVIL RIGHTS COMPLIANCE .......................................................................................... 7
C. START OF CONSTRUCTION .................................................................................................. 7
D. PROJECT MANAGEMENT CONFERENCE. ......................................................................... 8
E. ARCHITECT/ENGINEER SERVICES ................................................................................ 8
F. SERVICES PERFORMED BY RECIPIENT’S OWN FORCES ............................................. 8
G. TRIBAL EMPLOYMENT RIGHTS ORDINANCES .............................................................. 9
H. LAND, EASEMENTS AND RIGHTS OF WAY ..................................................................... 9
I.
RELOCATION ASSISTANCE .................................................................................................. 9
J.
EDA REVIEW OF PLANS AND SPECIFICATIONS........................................................... 10
K. NON-EDA WORK.................................................................................................................... 10
L. ALTERNATE CONSTRUCTION PROCUREMENT METHODS ...................................... 11
M. OVERRUN AT THE BID OPENING ..................................................................................... 11
V. REQUIREMENTS DURING CONSTRUCTION ....................................................................... 12
A. THE RECIPIENT’S RESPONSIBILITIES......................................................................... 12
B. CONTRACT CHANGE ORDERS. ....................................................................................... 13
C. SPECIFIC REQUIREMENTS FOR SUBCONTRACTORS ................................................ 14
D. CONTRACTING STANDARDS ............................................................................................. 14
E. COMPETITIVE PROCUREMENT REQUIREMENTS ........................................................ 16
VI. DISBURSEMENT OF GRANT FUNDS AND FINANCIAL ADMINISTRATION .................... 20
A. PRE-DISBURSEMENT REQUIREMENTS ...................................................................... 20
B. INTERIM DISBURSEMENTS ........................................................................................... 21
C. FINAL DISBURSEMENT .................................................................................................. 21
ii

OMB Number: 0610-0096
Expiration Date: 11/30/2021

VII. AWARD AMENDMENTS, APPROVALS, AND NOTIFICATIONS .......................................... 21
A. AMENDMENTS ....................................................................................................................... 22
B. TIME SCHEDULE EXTENSIONS ......................................................................................... 22
C. BUDGET REVISIONS ............................................................................................................. 23
D. ADDITIONAL EDA FUNDING ........................................................................................ 23
E. ADMINISTRATIVE APPROVALS AND NOTIFICATIONS ............................................. 24
F. TERMINATION OF INVESTMENT ASSISTANCE ............................................................ 24
VIII. POST-CONSTRUCTION REQUIREMENTS ........................................................................... 26
A. AUDIT REQUIREMENTS ...................................................................................................... 26
B. DEPARTMENTAL AUDIT RESOLUTION PROCESS ....................................................... 27
C. PROPERTY MANAGEMENT ................................................................................................ 28
D. CLOSEOUT PROCEDURES................................................................................................... 28
IX. APPENDIX ......................................................................................................................................... 31

iii

OMB Number: 0610-0096
Expiration Date: 11/30/2021

I.

PURPOSE AND SCOPE OF THIS SUMMARY
A. PURPOSE
1. This “Summary of EDA Construction Standards” (hereinafter referred to as “Summary”)
describes the procedures for compliance, reporting, and record-keeping, and
administrative requirements that apply to construction investments made by the
Economic Development Administration (“EDA”) under sections 201 or 209 (42 U.S.C.
§§ 3141 and 3149) of the Public Works and Economic Development Act of 1965, as
amended (42 U.S.C. § 3121 et seq.) (“PWEDA”).
2. Terms and Conditions. Form CD-450, “Financial Assistance Award,” (the “Award”),
executed by EDA and the Recipient, together with the EDA-approved project budget
and scope of work, standard terms and conditions, special award conditions, and all
applicable federal statutory and regulatory requirements as incorporated by reference,
constitute the complete requirements, hereinafter referred to as the “Terms and
Conditions,” applicable to the EDA investment. This Summary is designed to help
clarify these requirements. In the event that any term or provision in this Summary
conflicts with or is inconsistent with any provision contained in the Terms and
Conditions, the provisions of the Terms and Conditions are controlling.
B. SCOPE
1. This Summary applies to all Awards for construction projects and is based on the Office
of Management and Budget’s (“OMB”) administrative and programmatic requirements
for federal grants as set forth in the Uniform Administrative Requirements, Cost
Principles, and Audit Requirements for Federal Awards and in EDA’s regulations
implementing PWEDA. These requirements are published in the Code of Federal
Regulations (“C.F.R.”), each as amended from time to time:
(a)
(b)

13 C.F.R. chapter III (Economic Development Administration, Department of
Commerce); and
2 C.F.R. part 200 (Uniform Administrative Requirements, Cost
Principles, and Audit Requirements for Federal Awards).

2. This Summary supplements the requirements set out in PWEDA, EDA’s regulations at 13
C.F.R. chapter III, the Terms and Conditions of the Award, 2 C.F.R. part 200 and the
applicable requirements and authorities listed in the Appendix to this Summary and the
hyperlinks set out therein (see section IX.). This Summary should be used as a reference
tool to implement various requirements that apply to EDA construction investments made
under sections 201 or 209 of PWEDA (42 U.S.C. §§ 3141 and 3149). This Summary is
not a comprehensive source of information. In addition to PWEDA, a list of primary
sources of legal requirements is set out above in section I.B.1.

1 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

II.

DEPARTMENT OF COMMERCE AND EDA POLICIES
A. As a federal agency, EDA is obligated to promulgate regulations and establish policies and
procedures applicable to Recipients of EDA investments to:
1.
2.
3.

Ensure compliance with applicable federal requirements;
Safeguard the public’s interest in the grant assets; and
Promote the effective use of grant funds in accomplishing the purpose(s) for which they
were awarded.

B. EDA or the Department of Commerce (the “Department” or “Departmental”) may issue
changes from time to time to EDA’s regulations and other requirements and policies that
apply to the Award. Such changes may upon occasion increase administrative or
programmatic flexibility in administering the Award. The implementation of any such
regulatory, administrative or programmatic change in administering the Award must have
prior EDA written approval.
C. EDA’s policy is to administer all Awards uniformly; however, there may be special
circumstances that warrant a variance. To accommodate these circumstances and to
encourage innovative and creative ways to address economic development problems, EDA
may consider requests for variances to the procedures set out in this Summary if they do not
conflict with applicable federal statutory and regulatory requirements, are consistent with the
goals of EDA’s programs, and make sound economic and financial sense.
III.

REQUIREMENTS APPLICABLE TO EDA INVESTMENTS
A. GRANT RECIPIENT AS TRUSTEE
The Recipient of an EDA investment holds grant funds and any EDA-funded project property
in trust for the purpose(s) for which the Award was made. The Recipient’s obligation to the
Federal government continues for the estimated useful life of the project, as determined by
EDA, during which EDA retains an undivided equitable reversionary interest (the “Federal
Interest”) in the property improved, in whole or in part, with the EDA investment.
See 13 C.F.R. § 314.2; 2 C.F.R. §§ 200.41, 200.316.
If EDA determines that the Recipient fails or has failed to meet this obligation, the agency
may exercise any rights or remedies with respect to its Federal Interest in the project.
However, EDA’s forbearance in exercising any right or remedy in connection with the
Federal Interest does not constitute a waiver thereof.
B. THE RECIPIENT’S RESPONSIBILITIES
1. The Recipient is responsible for complying with all federal laws (and the regulations
issued thereunder), federal, Departmental and EDA policies, Executive Orders, and 2
C.F.R. part 200, as referenced in the Terms and Conditions, each as may be amended
from time to time. These statutes, regulations, policies, Executive Orders and 2 C.F.R.
part 200 may include administrative and audit requirements, federal cost principles,
programmatic requirements, financial requirements, and property management
requirements. See 13 C.F.R. § 302.6. The Recipient is responsible for the design,
bidding, construction, and operation of the project to ensure compliance with all grant
requirements, including those set out at 13 C.F.R. part 305.

2 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

2. In order to facilitate timely implementation, EDA may accept the Recipient’s
certification, accompanied by evidence satisfactory to EDA, that it meets the
requirements for receiving the Award and that it will comply with its Terms and
Conditions. See 13 C.F.R. § 302.15; 2 C.F.R. § 200.208. EDA also may require the
Recipient submit specific certifications for critical issues, such as major procurement and
costs claimed in requests for disbursement of grant funds. EDA will monitor project
progress and compliance with the Terms and Conditions through the:
(a)
(b)
(c)
(d)

Recipient’s written reports;
Review of the Recipient’s records during EDA visits to the project site;
Department’s Office of Inspector General audits; and
Single or program-specific audit conducted in accordance with Subpart F of 2
C.F.R. part 200 and the related Compliance Supplements. See section VIII.A.
of this Summary.

3. During the construction period, the Recipient is responsible for:
(a)
(b)
(c)
(d)

Monitoring project progress and reporting progress to EDA;
Providing for adequate construction inspection;
Paying costs incurred for the project promptly; and
Monitoring contractors’ compliance with applicable local, State and federal
requirements.

4. After construction is completed, the Recipient is responsible for submitting close-out
documentation and properly administering, operating and maintaining the project for its
estimated useful life, as determined by EDA and as set forth in the Terms and Conditions.
See 13 C.F.R. § 302.12; 2 C.F.R. §§ 200.316, 200.343-200.344.
5. Failure to satisfy any Term or Condition may result in disallowance of costs, or
suspension or termination of the Award and recovery of grant funds. In addition, such
failure may have a negative impact on the Recipient’s ability to receive future funding
from the Department. See 13 C.F.R. § 302.18; 2 C.F.R. §§ 200.213, 200.338-200.342.
In particular, the project development time schedule, a Term of the Award, can be
extended only through the Recipient’s written request for an amendment to the Award
and written approval by EDA. See 13 C.F.R. § 302.7. The Terms and Conditions of the
Award place the Recipient on notice that the grant may be suspended for not proceeding
in accordance with the EDA-approved time schedule set out in the Award. No
disbursement of EDA funds is permitted when a project has exceeded the EDA-approved
time schedule, unless EDA has given written approval to a time schedule extension. See
13 C.F.R. § 305.9 regarding project phasing and investment disbursement.
C. EMINENT DOMAIN
In making a discretionary award for a construction project, EDA considers the policy on
eminent domain set out in Executive Order 13406, “Protecting the Property Rights of the
American People.” The Terms and Conditions of the Award include appropriate provisions
to ensure that the Recipient has agreed:
1. Not to use any power of eminent domain available to the Recipient (including the
commencement of eminent domain proceedings) for use in connection with the project
for the purpose of advancing the economic interests of private parties;
2. Not to accept title to land, easements or other interests in land acquired by the use of any
power of eminent domain for use in connection with the project for such purposes; and
3 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

3. Any use of the power of eminent domain to acquire land, easements, or other interests in
land, whether by the Recipient or any other entity that has the power of eminent domain,
in connection with the project without prior written consent of EDA is an unauthorized
use of the project. If the Recipient puts the project to an unauthorized use, the Recipient
will be required to compensate EDA for its fair share in accordance with 13 C.F.R.
§§ 314.4 and 314.5.
D. RECORD-KEEPING REQUIREMENTS
The Recipient is responsible for maintaining records that document compliance with the
Terms and Conditions of the Award. At a minimum, the Recipient’s records must contain
documentation that fully discloses:
1.
2.
3.
4.
5.
6.

The amount and disposition of the EDA investment assistance;
All project expenditures and procurement actions;
The total cost of the project that the Award funds;
The amount and nature of the portion of project costs provided by non-EDA sources;
Contractor compliance with applicable federal requirements; and
Such other records as EDA determines will facilitate an effective audit.

The Recipient is responsible for retaining records for the time frame specified in the
Terms and Conditions. See 13 C.F.R. § 302.14. See also 2 C.F.R. § 200.333.
E. THE FINANCIAL ASSISTANCE AWARD
The Recipient should pay particular attention to the following provisions of the Award:
1. Description of Project. The description of the project in the Award, together with more
detailed information provided in the Award application, determines and defines the
scope(s) of work to be funded under the Award.
2. Federal Requirements. The listed federal requirements describe applicable
administrative or programmatic obligations for which the Recipient is responsible.
Critical documents are listed in section IX. (Appendix) of this Summary. These
publications provide important information on requirements regarding procurement,
record-keeping, eligible project costs and other administrative or programmatic issues.
3. Standard Terms and Conditions. The standard terms and conditions are applicable to all
EDA-assisted construction projects.
4. Special Award Conditions. The special award conditions may contain conditions that
must be satisfied prior to advertisement for bids, start of construction, or disbursement of
Award funds, as well as conditions unique to the Award that are ongoing for the
estimated useful life of the project.
F. FINANCIAL REPORTING
1. Semiannual financial reports. Any Recipient whose Award has not been fully
disbursed is required to submit a “Federal Financial Report” (Form SF-425 or any
successor form) to EDA semiannually to report on the status of unreimbursed
obligations. This report will provide information on the amount of allowable project
expenses that have been incurred, but not claimed for reimbursement by the Recipient.
The first report shall be as of March 31 of each year and shall be submitted to EDA no
later than April 30 of each year, and the second report shall be of September 30 of each
year and shall be submitted to EDA no later than October 30 of each year. Instructions
for completing and submitting Form SF-425 will be furnished to the Recipient at least
sixty (60) days before the report is due. While EDA generally does not advance funds,
when the agency does so, the Recipient must submit Form SF- 425 within fifteen (15)
business days following the end of each quarter for an award under $1 million, fifteen
4 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

(15) business days following the end of each month for an award totaling $1 million or
more, or as otherwise specified in a special award condition.
2. Final financial report. The Recipient must submit a final financial report using Form
SF-425 within ninety (90) days of the expiration date of the Award (or from the date the
Recipient accepts the project from the contractor, whichever occurs earlier).
3. Noncompliance with financial reporting requirements. Noncompliance with these
requirements will result in appropriate enforcement action under this Award, including
but not limited to suspension of Award payments or disallowance of costs. Financial
reports are to be submitted to the Project Officer.
G. MONITORING AND REPORTING PROJECT PROGRESS
1. Quarterly Project Progress (Performance) Reports.
(a)

Quarterly Project Progress Reports must be submitted in accordance with the
procedures set out in 2 C.F.R. § 200.328, as applicable, and as indicated below.
Failure to submit required reports in a timely manner may result in the
withholding of payments under the Award; deferral of processing of new awards,
amendments or supplemental funding pending the receipt of the overdue
report(s); or the establishment of an account receivable for the difference
between the total federal share of outlays last reported and the amount disbursed.
See 13 C.F.R. § 302.18.

(b)

Unless otherwise specified in the Award, the Quarterly Project Progress
Reports will contain the following information for each project program,
function, or activity:
(i)

A comparison of planned and actual accomplishments according to
the timetable or list of project objectives in the Award;
(ii) An explanation of any delays or failures to meet the project timetable
or project goals; and
(iii) Any other pertinent information including, when appropriate, analysis and
explanation of cost overruns or high unit costs.
(c)

Quarterly Project Progress Reports shall be submitted for each calendar quarter
to the Project Officer. Each project progress report must be submitted in
accordance with the deadlines outlined in the special award conditions, or, where
not otherwise specified, project progress reports will be due on a quarterly basis not
later than January 31, April 30, July 31, and October 31 for the immediate
previous quarter. The final Project Progress Report shall be submitted to EDA
no more than 90 days after the project closeout date. This reporting requirement
begins with the Recipient’s acceptance of the Award and ends when EDA
approves project closeout.
The Recipient shall submit Quarterly Project Progress Reports to the Project
Officer electronically, unless otherwise specified in the Special Award
Conditions.

Interim performance reporting. The Recipient must report any event that will or may have
a significant impact upon the project, including delays or adverse conditions that
materially may affect the ability of the Recipient to attain project objectives within
established time periods or meet the project development time schedule. The recipient
must disclose such problems to the Project Officer in the most time-expedient way
5 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

possible and then, if the initial report was not made in writing, report the event to the
Project Officer in writing. Such a report shall include a statement of the event or issue, a
statement of the course of action taken or contemplated to resolve the matter, and any
federal assistance needed to resolve the situation. If budget changes are required, the
Recipient must submit a written budget revision request. See 2 C.F.R. § 200.308(g). Any
changes made to the project without EDA’s prior approval are made at the Recipient’s risk
of nonpayment of costs, suspension, termination, or other applicable EDA action. See 13
C.F.R. § 302.7.
2. Government Performance and Results Act reporting. In addition to Quarterly Project
Progress Reports, EDA may require the Recipient to report on project performance
beyond the project closeout date for Government Performance and Results Act
(“GPRA”) purposes. In no case shall the Recipient be required to submit any report
more than ten years after the project closeout date. Data used by the Recipient in
preparing reports shall be accurate and, whenever possible, from independent sources.
See 13 C.F.R. § 302.16.
3. Reporting on real property. The Recipient must submit reports (using Form SF- 429
“Real Property Status Report” or any successor form) at least annually, on the status of
real property in which EDA retains an interest, unless the Federal interest in the real
property extends 15 years or longer. When EDA’s interest extends for a period of 15
years or more, EDA, at its option, may require the Recipient to report at various multiyear frequencies (e.g., every two years or every three years, not to exceed a five-year
reporting period; or annual reporting for the first three years of the Award and
thereafter every five years). See 2 C.F.R. § 200.329.
IV.

PRE-CONSTRUCTION REQUIREMENTS
A. ENVIRONMENTAL COMPLIANCE
Each Recipient must comply with all environmental standards and shall identify to EDA
any impact a proposed project may have on the environment. In some cases, Award funds
can be withheld by EDA under a special award condition requiring the Recipient to submit
additional environmental compliance information sufficient to enable EDA to make an
assessment on any impacts that a project may have on the environment.
EDA undertakes environmental reviews of projects in accordance with the requirements of
the National Environmental Policy Act of 1969, as amended (42
U.S.C. § 4321 et seq., as implemented under 40 C.F.R. parts 1500-1508) (“NEPA”), and all
other federal environmental statutes, regulations and Executive Orders, as listed in the
Terms and Conditions of the Award. These authorities include the implementing
regulations of NEPA, which require EDA to provide public notice of the availability of
project-specific environmental documents, such as environmental impact statements,
environmental assessments, findings of no significant impact, and records of decision, to the
affected or interested public, as specified in 40 C.F.R.
§ 1506.6(b). The Recipient must pay special attention to and comply with any special
environmental conditions in the Award.
See 13 C.F.R. § 302.1.

6 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

B. CIVIL RIGHTS COMPLIANCE
In accordance with the following authorities, discrimination is prohibited by a Recipient or
“Other Party” (as defined in 13 C.F.R. § 302.20(b)) with respect to a project receiving
EDA investment assistance under PWEDA:
1.

2.
3.

4.

5.

6.

Title VI of the Civil Rights Act of 1964 (42 U.S.C. § 2000d et seq.) and the
Department’s implementing regulations at 15 C.F.R. part 8, which prohibit
discrimination on the grounds of race, color, or national origin under programs or
activities receiving federal financial assistance;
Title IX of the Education Amendments of 1972 (20 U.S.C. § 1681 et seq.)
prohibiting discrimination on the basis of sex under federally-assisted education
programs or activities;
Pub. L. No. 92-65, 42 U.S.C. § 3123 (proscribing discrimination on the basis of sex
in EDA assistance provided under PWEDA) and Pub. L. No. 94-369, 42
U.S.C. § 6709 (proscribing discrimination on the basis of sex under the Local Public
Works Program), and the Department’s implementing regulations at 15 C.F.R. §§
8.7-8.15;
Section 504 of the Rehabilitation Act of 1973 (29 U.S.C. § 794), and the Department’s
implementing regulations at 15 C.F.R. part 8b, which prohibit discrimination on the
basis of handicap under any program or activity receiving or benefiting from federal
assistance;
The Age Discrimination Act of 1975 (42 U.S.C. § 6101 et seq.), and the
Department’s implementing regulations at 15 C.F.R. part 20, which prohibit
discrimination on the basis of age in programs or activities receiving federal
financial assistance;
The Americans with Disabilities Act of 1990 (42 U.S.C. § 12101 et seq.) prohibiting
discrimination on the basis of disability under programs, activities and services
provided or made available by State and local governments or instrumentalities or
agencies thereto, as well as public or private entities that provide public transportation;
and other federal statutes, regulations and Executive Orders, as applicable. See
generally 13 C.F.R. § 302.20.

Consistent with 2 CFR § 200.321, the Recipient and any subrecipient must take all
necessary affirmative steps to ensure that minority businesses, women’s business
enterprises, and labor surplus area firms are used when possible.
C.

START OF CONSTRUCTION
1. Early construction starts. The Recipient shall make a written request to EDA for early
construction start permission (that is, after the date of Award, but before EDA gives
formal approval for construction to commence). For project costs to be eligible for EDA
reimbursement, EDA must determine that the award of all contracts necessary for design
and construction of the project facilities is in compliance with the Terms and Conditions.
If construction commences prior to EDA’s determination, the Recipient proceeds at its
own risk until EDA’s review and concurrence. See 13 C.F.R. § 305.11.
2. Delayed construction starts. If significant construction (as determined by EDA) is not
commenced within two years of the Award date or by the date estimated for start of
construction in the grant Award (or the expiration of any extension granted in writing
by EDA), whichever is later, the EDA grant will be automatically suspended and may
be terminated if EDA determines, after consultation with the Recipient, that
construction to completion cannot reasonably be expected to proceed promptly and
expeditiously. See also sections VII.B. and F. of this Summary.
7 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

D. PROJECT MANAGEMENT CONFERENCE
1. Shortly after approval of the Award, EDA may contact the Recipient to arrange a
project management conference. The purpose of the project management conference
is to explain to the Recipient its post-approval responsibilities for administration of the
Award and applicable federal requirements.
2. Whenever practicable, the project management conference should be held when
and where appropriate EDA regional office personnel will be available. The
Recipient's authorized representative, architect/engineer, attorney and possibly the
Recipient’s financial representative should attend.
E. ARCHITECT/ENGINEER SERVICES
1. The architect/engineer agreement shall provide for all services required by the
Recipient for the planning, design and engineering phases of the project. Appropriate
standards or guidance developed by professional organizations, such as the American
Consulting Engineers Council (“ACEC”), American Society of Civil Engineers
(“ASCE”), National Society of Professional Engineers (“NSPE”), and/or the American
Institute of Architects (“AIA”), may be used where the Recipient does not have
standard procurement or contracting documents.
The architect/engineer agreement shall cover all services necessary for the successful
execution of the project including consultations, surveys, soil investigations,
supervision, travel, “as-built” or record drawings, arrow diagram (“CPM/PERT”) where
applicable, and incidental costs. Regardless of who furnishes the construction inspector,
the architect/engineer shall be held responsible for making sufficient visits to the project
site to ensure that the work proceeds in accordance with the approved plans and
specifications.
2. The Recipient must select the architect/engineer in accordance with the procurement
standards set forth in 2 C.F.R. part 200. Unless EDA has approved a different type of
award, the compensation to the architect/engineer for basic services must be either a
fixed price or a cost reimbursement with an agreed maximum to be eligible for EDA
participation. The amount of EDA participation will be based on EDA’s determination
(subject to audit) that the compensation is reasonable. The “cost-plus-a-percentage-ofcost” and “percentage of construction cost” methods of contracting are specifically
prohibited.
3. In addition to other provisions required by the Federal agency or Recipient, in
accordance with 2 C.F.R. § 200.326, all contracts made by the Recipient under an
Award must contain the applicable provisions set out in Appendix II to 2 C.F.R. part
200, which address various contractual requirements including remedies, termination
for cause and convenience, Equal Employment Opportunity, the Davis-Bacon Act, the
Contract Work Hours and Safety Standards Act, rights to inventions, environmental
quality, energy efficiency, debarment and suspension, the Byrd Anti-Lobbying
Amendment, and procurement of recovered materials. See Appendix II to 2 C.F.R. part
200 for a full explanation of these requirements.
F.

SERVICES PERFORMED BY RECIPIENT’S OWN FORCES
The Recipient may have a portion or all of the design, construction, inspection, legal
services, or other work or services in connection with the project performed by
personnel who are employed by the Recipient either full-time or part-time (“in-house
forces”). See 13 C.F.R. § 305.7.
8 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

EDA may approve the use of “in-house forces” subject to the following
conditions:
1. The services are routinely performed by the Recipient for all construction
projects performed by the Recipient;
2. The Recipient has a special skill required for the construction of the project;
3. The Recipient has made all reasonable efforts to obtain a contractor, but has failed to
do so because of uncontrollable factors such as the remoteness of the project site or an
overabundance of construction work in the region; or
4. The Recipient demonstrates substantial cost savings.
“In-house forces” may be considered an eligible cost for EDA reimbursement if the work
or services performed are in conformance with 2 C.F.R. part 200.
G. TRIBAL EMPLOYMENT RIGHTS ORDINANCES
In accordance with Departmental policy, EDA recognizes Tribal Employment Rights
Ordinances (“TEROs”), which may provide for preferences in contracting and employment,
in connection with its financial assistance awards. Federal awards granted to American Indian
and Alaska Native tribal governments generally may provide for preference in contracting,
hiring, firing, and the payment of a TERO fee.
The payment of the TERO fee, which supports the tribal employment rights office to
administer the preferences, should generally be allowable as an expense that is “necessary
and reasonable for the performance of the Federal Award,” as provided under 2 C.F.R. §
200.403.
H. LAND, EASEMENTS AND RIGHTS OF WAY
1. Except as provided in 13 C.F.R. § 314.6(b) or as otherwise authorized by EDA, Recipientowned property acquired or improved in whole or in part with investment assistance must
not be used to secure a mortgage or deed of trust or in any way otherwise encumbered.
2. The Recipient must disclose to EDA all encumbrances. EDA will not accept any
encumbrance that interferes with the construction, intended use, operation or
maintenance of the project during its estimated useful life. Before advertising for
construction bids or at such other time as EDA requires, the Recipient must furnish
evidence, satisfactory in form and substance to EDA, that title to real property required
for the project is vested in the Recipient and that such rights-of-way, easements, State or
local government permits, long-term leases or other items required for the project have
been or will be obtained by the Recipient within an acceptable time, as determined by
EDA. See 13 C.F.R. § 314.7.
I.

RELOCATION ASSISTANCE
The Recipient is subject to the provisions of the Uniform Relocation Assistance and Real
Property Acquisition Policies Act of 1970 (42 U.S.C. § 4601 et seq.) (the “Uniform Act”)
and implementing regulations issued at 49 C.F.R. part 24. The Uniform Act establishes
uniform policies for the fair and equitable treatment of persons, businesses, or farm operations
affected by the acquisition, rehabilitation or demolition of real property acquired for
a project financed wholly or in part with federal assistance funds. Recipients and any
subrecipients are required to comply fully with the intent of the Uniform Act and to provide
evidence of such compliance if requested. See 13 C.F.R. § 302.5.
9 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

J.

EDA REVIEW OF PLANS AND SPECIFICATIONS
1. The Recipient (with the assistance of its architect/engineer) is responsible for the
accuracy and completeness of the design, dimensions, details, proper selection of
materials, and compliance with local building codes or ordinances, and is expected to
use the “EDA Contracting Provisions for Construction Projects,” which provides a list
of applicable EDA and other federal requirements as guidance in developing all
construction contracts.
2. Plans, specifications, and related documents must be submitted for EDA review and
concurrence prior to advertising for bids. EDA’s review is to ensure compliance with
the Terms and Conditions of the Award and does not attest to the accuracy of design,
dimensions, details, proper selection of materials, nor compliance with local building
codes or ordinances. This responsibility rests with the Recipient.
EDA’s review is intended to confirm that:
(a)
(b)
(c)
(d)

The project as designed complies with the scope of work as described in the
project application and in the Award;
Deductive alternates, if used, are taken in a specific order as shown in the
bid documents;
Any non-EDA funded work, if included, is identified so separate project progress
and separate project costs can be determined; and
The EDA project number and applicable EDA participation appears on the
cover of all contract drawings and on the face sheet of the specification
document(s).

3. EDA also will review for acceptability after advertising but before award of the
contract if:
(a)
(b)
(c)
(d)
(e)
4.

The procurement is expected to exceed the simplified acquisition threshold
(currently set at $250,000) and is to be awarded without competition after one
bid or offer is received in response to a solicitation;
The proposed award is more than the simplified acquisition threshold and is to
be awarded to other than the apparent low bidder under a sealed bid
procurement;
A proposed contract modification changes the scope of a contract or increases
the contract amount above the simplified acquisition threshold;
The Recipient’s procurement procedures or operations fail to comply with
the procurement standards set out in the Award; or
The procurement, which is expected to exceed the simplified acquisition
threshold, specifies a “name brand” product.

Until EDA has reviewed and concurred with the Recipient’s proposed contracts and
related documents and determined they comply with the Terms and Conditions, the
Recipient will be proceeding at its own risk regarding the eligibility of any costs
incurred. See 13 C.F.R. § 305.11.

K. NON-EDA WORK
If the Recipient plans to include both EDA-funded and non-EDA-funded work in a single
contract, the following requirements apply:
1.

The plans and specifications must clearly define and separate costs included in the EDA
project scope of work from other costs;
10 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

2.

The Recipient may offer for bid and award work in addition to the EDA project, provided:
(a)
(b)

the Recipient understands that EDA will participate only in the EDAapproved project; and
the additional work does not adversely affect the original intent or economic
impact of the EDA-approved project;

3. Plans and specifications must be drawn so that the EDA project is clearly identifiable
at all times during construction; and
4. Bid underruns cannot be applied to fund work that is not a part of the EDA project. It is
the responsibility of the Recipient to pay in full for all additional work beyond the scope
of the EDA project. See 13 C.F.R. § 305.10.
Where a proposed contract includes EDA-funded and non-EDA-funded scope(s) of work,
the contract will normally be awarded to the lowest bidder on all the work. EDA’s
participation will be determined based on the bid price for the lowest qualified bid for the
EDA-funded scope of work. The Recipient must include pertinent information with the
contract award documentation prior to submitting it for EDA concurrence.
L. ALTERNATE CONSTRUCTION PROCUREMENT METHODS
1. Recipients shall seek EDA’s prior written approval to use alternate construction
procurement methods to the traditional design/bid/build procedure (including lump sum
or unit price-type construction contracts). These methods may include design/build,
construction management at-risk and “in-house forces”. If an alternate method is used,
the Recipient shall submit to EDA for approval a construction services procurement plan
and the Recipient must use a design professional to oversee the process. See 13 C.F.R. §
305.6.
2. If the Recipient elects to use “in-house forces”, EDA will furnish specific
guidance to the Recipient to determine if the cost for such work is eligible for
EDA reimbursement. See section IV.F. of this Summary.
3. For all procurement methods, the Recipient must comply with the
procedures and standards set forth in 2 C.F.R. part 200.
M.

OVERRUN AT THE BID OPENING
If there is an overrun at bid opening, the Recipient may:
1. Take deductive alternatives to eliminate certain project elements in case of insufficient
funds – if provided for in the bid documents – in the exact order shown on the invitation
for bid until at least one of the responsive bids, less deductive alternative(s), results in a
price within the budget for that item of work. It should be noted that the use of deductive
alternates may result in a new low bidder. Therefore, care must be taken that the above
procedure is followed exactly when deductive alternates are used to determine the lowest
bid within the funds available.
2. Reject all bids and re-advertise if there is a rational basis for believing that readvertising will result in a lower bid (i.e., the Recipient will have the project
redesigned or there will be wider advertising).
11 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

3. Augment the Recipient’s share by an amount sufficient to cover the excess cost. If the
Recipient intends to finance the overrun from its own funds, it must furnish a letter to
EDA identifying the source of the additional funds and confirming that the funds are
from an acceptable source, will be available as needed, and are not or will not be
conditioned or encumbered in any way that would preclude its use consistent with the
requirements of the Award.
4. Request in writing additional EDA financial assistance as a last resort. EDA may not
approve the request for additional funds, which may require the termination of the
project. See sections VII.C. and D. of this Summary.
V.

REQUIREMENTS DURING CONSTRUCTION
A. THE RECIPIENT’S RESPONSIBILITIES
1. General. The Recipient (with the assistance of the architect/engineer) is responsible for:
(a)
(b)
(c)
(d)

ensuring project completion in accordance with approved plans and
specifications;
monitoring project progress;
keeping EDA advised of project progress;
providing for adequate construction inspection; (e) paying costs incurred for the
project promptly; and (f) monitoring the contractors’ compliance with local,
State and federal requirements. See also section III.B. of this Summary.

2. EDA construction sign. The Recipient is responsible for constructing, erecting and
maintaining in good condition throughout the construction period a sign (or signs) in a
conspicuous place at the project site indicating that the Federal government is
participating in the project. EDA will provide specifications for the sign and may
require more than one sign if site conditions so warrant. If the EDA-recommended
sign specifications conflict with State or local law, the Recipient may modify such
recommended specifications so as to comply with the State or local law. See 13 C.F.R.
§ 305.12.
3. Inspection of construction. The Recipient must provide competent project inspection
during the construction period. The inspector may be an employee of the Recipient, an
employee of the architect/engineer, or a person(s) under contract with the Recipient.
EDA must review and concur with the extent of the inspection and the selection of the
inspector.
4. Occupancy prior to completion. If the project or any part of it is to be occupied or
used prior to its acceptance from the contractor, the Recipient must:
(a)
(b)
(c)
(d)
(e)

follow the requirements of local or State law;
notify EDA of the intent to occupy or use the facility and the effective date of
the occupancy or use;
secure the written consent of the contractor;
secure an endorsement from the insurance carrier and consent of the surety
permitting occupancy or use during the period of construction; and
secure permanent fire and extended coverage insurance and, where applicable,
grant the contractor a permit to complete construction.
12 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

Occupancy or use prior to final acceptance from the contractor is entirely at the
Recipient’s risk. See 13 C.F.R. § 305.14.
5. Labor standards. All contractors on EDA-assisted projects are required to perform their
work in accordance with OSHA regulations and the Contract Work Hours and Safety
Standards Act (40 U.S.C. §§ 3701-3708), as supplemented by U.S. Department of
Labor’s regulations (29 C.F.R. parts 5 and 1926). The Recipient or its architect/engineer
should periodically check the contractor’s compliance. The Recipient shall notify EDA
of all serious accidents and/or injuries that occur on the EDA-assisted project.
6. Inspection for final acceptance. The Recipient will schedule a final inspection when all
construction has been completed, the architect/engineer has accomplished his/her final
inspection and all deficiencies have been corrected. The project must be complete and
functional before the final inspection is performed. Representatives of the Recipient,
the architect/engineer and the contractor(s) will make the final inspection. EDA must
be notified in advance of the final inspection so that an EDA representative also may
have the opportunity to participate.
7. Contractor payrolls. The Recipient must require each contractor and subcontractor to
maintain weekly payroll records. EDA may require that copies of payroll records be
furnished to the applicable regional office.
8. Equal employment opportunities. The regulations at 41 C.F.R. § 60-1.7 issued
pursuant to Executive Order 11246, “Equal Employment Opportunity”, as amended,
require all “prime contractors” and “subcontractors,” as those terms are defined in 41
C.F.R.
§ 60-1.3, to submit compliance reports regarding equal employment opportunities. The
purpose of the regulations at 41 C.F.R. part 60-1 is to achieve the aims of parts II, III and
IV of Executive Order 11246, as amended, for promoting and ensuring equal opportunity
for all persons, without regard to race, color, religion, sex, sexual orientation, gender
identity, or national origin, employed or seeking employment with Federal government
contractors or with contractors performing under federally-assisted construction contracts.
B. CONTRACT CHANGE ORDERS
1. After the construction contracts have been executed, it may become necessary to alter
them. This requires a formal contract change order, issued by the Recipient and
accepted by the contractor. All contract change orders must be reviewed by EDA,
even if EDA is not participating in the cost of the change order or the contract price is
to be reduced. See 13 C.F.R. § 305.13.
2. The work on the project may continue pending EDA review and concurrence with the
change order but the Recipient should be aware that all such work is at the Recipient’s
risk as to whether the cost for the work will be an eligible project cost for EDA
participation until EDA concurrence is received for the change order.
3. The Recipient (or its architect/engineer) shall perform a cost or price analysis in
connection with every change order that affects the contract price. Generally, change
orders should be submitted to EDA for review and concurrence as such changes occur.
The Recipient will prepare proposed contract change orders in sufficient quantity so that
one (1) copy can be furnished to EDA for concurrence. Necessary supporting statements,
estimates, specifications and plans should be attached. Before submission to the EDA
regional office, the change order must be signed by the Recipient, the architect/engineer
and the contractor. The Recipient will be notified in writing of EDA’s concurrence if the
change order is acceptable to EDA.
13 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

4. EDA will not allow changes to the authorized purpose and intent of the project.
Change orders that add minimally or incidentally to the cost of the project but do not
alter the project scope may be allowed by EDA, provided, that either:
(a) The Recipient has agreed in writing to fund the additional cost, in which case all
work involved in the accomplishment of the change order will be an ineligible
project cost and no EDA funds will be used to pay for it; or
(b) There are sufficient funds remaining in the project budget to cover the
change order without jeopardizing the completion of the project.
5. EDA will not approve EDA financial participation in change orders that are solely for
the purpose of using excess funds resulting from an underrun of one or more of the
items in the EDA-approved project budget. EDA will concur with a change order if the
work in the change order is within the project scope and is necessary for the proper
implementation of the project.
6. Unit prices are often used as a basis on which to make a contract award. In addition, they
may be used for establishing actual costs where actual quantities differ from estimated
quantities. Variations will normally require a change order to the contract whether or not
a change in unit price is involved. Any increase in quantity that will result in an overall
project cost overrun will require a change order to the contract. Any change to a unit
price shown in the contract documents will require a change order to the contract. A
change order also may be required at project completion to establish final quantities for
unit price contracts.
C.

SPECIFIC REQUIREMENTS FOR SUBCONTRACTORS
1. The Recipient is responsible for ensuring that the contractor causes applicable
provisions to be inserted in all subcontracts to bind subcontractors to EDA and
Departmental requirements as contained in the Terms and Conditions of the Award and
in Appendix II to 2 C.F.R. part 200, as appropriate.
2. Each subcontractor must agree to comply with all applicable federal, State, and
local requirements.
3. As required by 2 C.F.R. § 200.213, the Recipient (or subrecipient) must not make any
award or permit any award (sub-grant or contract) at any tier to any party which is
debarred or suspended or is otherwise excluded from or ineligible for participation in
federal assistance programs under 2 C.F.R. part 180 and Executive Orders 12549,
“Debarment and Suspension” and 12689, “Debarment and Suspension.” The Recipient
may access the System for Award Management (“SAM”), maintained by the General
Services Administration, at www.sam.gov/. See also 2 C.F.R. part 1326.
4. The Terms and Conditions of the Award may impose additional requirements, which
the Recipient will be required to have the prime contractor impose on any
subcontractor(s).

D.

CONTRACTING STANDARDS
1. States. If a State is the Recipient of EDA investment assistance, when procuring
property or services, the State must follow the same policies and procedures it uses for
procurements from its non-federal funds. The State will comply with 2 C.F.R.
§ 200.322 dealing with the procurement of recovered materials and ensure that every
14 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

purchase order or other contract includes clauses required by Appendix II to 2 C.F.R.
part 200.
2. Recipients other than States. Consistent with the requirements of 2 C.F.R. § 200.318, a
Recipient of EDA investment assistance other than a State will use its own documented
procurement procedures which reflect applicable State and local laws and regulations;
provided that the procedures conform to applicable federal law and the standards
identified in 2 C.F.R. §§ 200.318 – 200.326. A Recipient may request EDA to review its
procurement system to determine whether its system meets these standards. See 2 C.F.R.
§ 200.324(c)(1).
Additionally, the Recipient or subrecipient may self-certify its procurement system.
Under a self-certification procedure, EDA may rely on written assurances from the
Recipient or subrecipient that it is complying with the standards in 2 C.F.R. §§ 200.318
– 200.326. The Recipient or subrecipient must cite specific policies, procedures,
regulations, or standards as being in compliance with 2 C.F.R. §§ 200.318 – 200.326,
and have its system available for EDA to review. See also section IV.G. for special
provisions applicable to certain Indian Tribal Recipients.
3. Standards of conduct. Recipients shall maintain a written code of conduct, which shall
govern the actions of any Interested Party (as defined in 13 C.F.R. § 300.3) engaged in
the award and administration of contracts supported by EDA funds. No Interested Party
shall participate in selection or in the award or administration of a contract supported by
EDA funds if a conflict of interest, real or apparent, is or could be involved. A conflict
may arise when any Interested Party has a financial or personal interest in the firms
selected for award. A conflict also may exist where there is an appearance that an
Interested Party’s objectivity in performing his or her duties is impaired. See 13 C.F.R. §
302.17 and 2 C.F.R. § 200.318(c).
4. Awards to responsible contractors. Recipients will make awards only to responsible
contractors possessing the ability to perform successfully under the terms and
conditions of a proposed procurement. Consideration will be given to such matters as
contractor integrity, compliance with public policy, record of past performance and
financial and technical resources. See 2 C.F.R. § 200.318(h).
5. Maintenance of records. Recipients will maintain records sufficient to detail the history
of each procurement transaction related to the EDA project. These records will include
but are not necessarily limited to the rationale for the method of procurement, selection of
contract type, contractor selection or rejection, and the basis for concluding the contract
price. See 2 C.F.R. § 200.318(i).
6. Settlement of issues. Recipients alone is responsible, in accordance with good
administrative practice and sound business judgment, for the settlement of all contractual
and administrative issues arising out of procurements. These issues include, but are not
limited to, source evaluation, protests, disputes, and claims. EDA will not substitute its
judgment for that of the Recipient unless the matter, as determined in EDA’s sole
discretion, primarily involves a federal concern.
7. Wage rate requirements. Wage rates paid for labor must not be less than the prevailing
area wages, as determined by the U.S. Secretary of Labor and must be embodied in the
construction contract pursuant to the requirements of the Davis-Bacon Act, as amended
(40 U.S.C. § 3141 et seq.). See also section IX. (Appendix) of this Summary.

15 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

E.

COMPETITIVE PROCUREMENT REQUIREMENTS
1. General. All procurement transactions in relation to the EDA project must be
conducted in a manner providing full and open competition consistent with applicable
federal requirements. See 2 C.F.R. § 200.319.
2. Geographic preferences. Recipients must conduct procurements in a manner that
prohibits the use of statutorily or administratively imposed in-State or local geographic
preferences in the evaluation of bids or proposals, except in those cases where applicable
federal statutes expressly mandate or encourage geographic preference. Nothing in this
guidance preempts State licensing laws. When contracting for architectural and
engineering services, geographic location may be a selection criterion, provided its
application leaves an appropriate number of qualified firms (given the nature and size of
the project) to compete for the contract. See 2 C.F.R. § 200.319.
3. Written selection procedures. Recipients must have written selection procedures
for procurement actions. These procedures must ensure that all solicitations:
(a)

Incorporate a clear and accurate description of the technical requirements for the
material, product or service to be procured. Such descriptions must not contain
features that unduly restricts competition. The description may include a
statement of the qualitative nature of the material, product or service to be
procured and, when necessary, must set forth those minimum essential
characteristics and standards to which it must conform if it is to satisfy its
intended use. Detailed product specifications should be avoided if possible.
When it is impractical or uneconomical to make a clear and accurate description
of the technical requirements, a “brand name or equivalent” description may be
used as a means to define the performance or other salient requirements of the
material, product or service. The specific features of a name brand which must be
met by offerors must be clearly stated; and

(b)

Identify all requirements which offerors must fulfill and all factors to be used in
evaluating bids or proposals.

See 2 C.F.R. § 200.319.
4. Bids submitted for alternative materials.
(a)

Should the Recipient, acting upon the advice of his/her consultant
architect/engineer, desire to obtain competitive prices for differing materials, such
bids should be requested on the basis of “alternate bids.” As used herein, this
term refers to the method used to obtain bids on more than one material to be
used for the same purpose. For example, for 2,000 linear feet of sewer line, Bid
A might call for the pipe material to be cast iron. Bid B might call for the pipe
material to be ductile iron. Bid C might call for the material to be asbestos
cement.

(b)

If bids are asked for on the basis of two or more alternate bids, the bid documents
must clearly state that the contract will be awarded to the bidder having the lowest
responsible bid price based upon the availability of funds.

(c)

If the Recipient wishes to use a material that will result in increased cost, EDA
may permit the use of such material, but the amount of EDA’s participation in
the project must remain based on the lowest bid from a responsible bidder.
16 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

5. Allowable methods of procurement and related requirements.
(a)

Procurement by sealed bids (formal advertising). Bids are to be publicly solicited
and a firm fixed-price contract (lump sum or unit price) is to be awarded to the
bidder whose bid, conforming to all material terms and conditions of the invitation
for bids, is lowest in price. The sealed bid method is the preferred method for
procuring construction services if the conditions in the following sentence are met.
In order for sealed bidding to be feasible, the following conditions should be
present: (i) a complete, adequate, and realistic specification or purchase
description is available; (ii) two or more responsible bidders are willing and able
to compete effectively for the business; and (iii) the procurement lends itself to a
firm fixed price contract and the selection of the successful bidder can be made
principally on the basis of price.
The following requirements apply to sealed bids:
(i)
(ii)
(iii)
(iv)

(v)

The invitation for bids is publicly advertised and bids must be solicited
from an adequate number of known suppliers, providing them sufficient
time prior to the date set for the opening of bids;
The invitation for bids, which includes any applicable specifications and
pertinent attachments, must adequately define the items or services, in
order for the bidder to properly respond;
All bids are publicly opened at the time and place prescribed in
the invitation for bids;
A firm fixed-price contract award will be made in writing to the
lowest responsive responsible bidder. Where specified in bidding
documents, factors such as discounts, transportation cost, and life
cycle costs must be considered in determining which bid is lowest.
Payment discounts will only be used to determine the low bid when
prior experience indicates that such discounts are usually taken
advantage of; and
Any or all bids may be rejected if there is a sound and
properly documented reason.

See 2 C.F.R. § 200.320(c).
The advertising process for inviting bids should be in compliance with applicable
State or local requirements where the project will be constructed. In the absence
of State or local requirements, the advertisement should appear in publications of
general circulation a minimum of four (4) times within a 30-day period prior to
the opening of bids. Generally, a minimum of thirty (30) days should be allowed
for submission of bids.
(b)

Procurement by competitive proposals. Competitive proposals are normally
conducted with more than one source submitting an offer, and either a fixed price
or cost-reimbursement type contract is awarded. This method generally is used
when conditions are not appropriate for the use of sealed bids. The following
requirements apply to competitive proposals:
(i)
(ii)
(iii)

Requests for proposals are publicized and identify all evaluation factors
and their relative importance; any response to a publicized request for
proposals must be considered to the maximum extent practical;
Proposals are solicited from an adequate number of qualified sources
(generally, EDA requires responses from at least three responsible firms);
Recipients have a written method for conducting technical
17 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

(iv)
(v)

evaluations of the proposals received and for selecting awardees;
Awards are made to the responsible firm whose proposal is most
advantageous to the program, with price and other factors considered, as
appropriate; and
Recipients may use competitive proposal procedures for qualificationbased procurement of architectural/engineering professional services
whereby competitors’ qualifications are evaluated and the most qualified
competitor is selected, subject to negotiation of fair and reasonable
compensation. This method, where price is not a selection factor, can be
used only for procuring architectural/engineering professional services. It
cannot be used to purchase other types of services though
architectural/engineering firms are a potential source to perform the
proposed effort.

See 2 C.F.R. § 200.320(d).
(c)

Procurement by noncompetitive proposals. This technique requires EDA’s prior
written concurrence and is conducted by solicitation of a proposal from only one
source. Procurement by noncompetitive proposals may be used only when the
award of a contract is infeasible under small purchase procedures, sealed bids or
competitive proposals and when one or more of the following circumstances
apply:
(i)
(ii)
(iii)
(iv)

The item is available only from a single source;
The public exigency or emergency for the requirement will not permit a
delay resulting from competitive solicitation;
EDA expressly authorizes noncompetitive proposals in response to a
written request from the Recipient; or
After soliciting a number of sources, competition is determined
inadequate.

See 2 C.F.R. § 200.320(f).
(d)

Procurement by Micro Purchases. Procurement by micro-purchase is
the acquisition of supplies or services, the aggregate dollar amount of
which does not exceed $10,000 (or $2,000 in the case of acquisitions
for construction subject to the Davis-Bacon Act). To the extent
practicable, the non-Federal entity must distribute micro-purchases
equitably among qualified suppliers. Micropurchases may be awarded
without soliciting competitive quotations if the non-Federal entity
considers the price to be reasonable. The $10,000 threshold is
periodically adjusted for inflation. For more information, please see
Uniform Guidance (2 CFR Part 200.67 and 200.320(a)).

(e)

Procurement by Small Purchase Procedures.
Small purchase procedures are those relatively simple and informal
procurement methods for securing services, supplies, or other property that do
not cost more than the Simplified Acquisition Threshold of $250,000. If small
purchase procedures are used, price or rate quotations must be obtained from an
adequate number of qualified sources. The $250,000 threshold is periodically
adjusted for inflation. For more information, see Uniform Guidance (2 CFR Part
200.320(b)).

(f)

Contract cost analysis.
18 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

(i)

(ii)

(iii)

(iv)

The Recipient must perform a cost or price analysis in connection
with every procurement action in excess of $150,000, including
contract modifications. The method and degree of analysis is
dependent on the facts surrounding the particular procurement
situation, but as a starting point, the Recipient must make independent
estimates before receiving bids or proposals.
The Recipient must negotiate profit as a separate element of the price
for each contract in which there is no price competition and in all
cases where cost analysis is performed. To establish a fair and
reasonable profit, consideration must be given to the complexity of
the work to be performed, the risk borne by the contractor, the
contractor’s investment, the amount of subcontracting, the quality of
its record of past performance, and industry profit rates in the
surrounding geographical area for similar work
Costs or prices based on estimated costs for contracts under grants will
be allowed only to the extent that costs incurred or cost estimates
included in negotiated prices are consistent with federal cost principles
(see section VI.A.3. of this Summary). The Recipient may reference its
own cost principles that comply with applicable federal cost principles.
The cost plus a percentage of cost and percentage of construction cost
methods of contracting must not be used.

See 2 C.F.R. § 200.323
(g)

Bonding and insurance requirements. For construction or facility
improvement contracts or for subcontracts exceeding $150,000, EDA may
accept the bonding policy and requirements of the Recipient or subrecipient if
EDA or the pass-through entity determines that the Federal interest is
adequately protected. If such a determination has not been made, the following
minimum requirements shall apply:
(i)

(ii)

(iii)

A bid guarantee must be obtained from each bidder equivalent to five (5)
percent of the bid price. The “bid guarantee” must consist of a firm
commitment such as a bid bond, certified check or other negotiable
instrument accompanying a bid as assurance that the bidder will, upon
acceptance of the bid, execute such contractual documents as may be
required within the time specified.
A performance bond must be required from the contractor for one hundred
(100) percent of the contract price. A “performance bond” is one executed
in connection with a contract to secure fulfillment of all the contractor’s
obligations under such contract.
A payment bond must be required from the contractor for one hundred
(100) percent of the contract price. A “payment bond” is one executed in
connection with a contract to ensure payment as required by law of all
persons supplying labor and material in the execution of the work provided
for in the contracts.
See 2 C.F.R. § 200.325.
The Recipient shall, at a minimum, provide the equivalent insurance
coverage for real property and equipment acquired or improved with EDA
funds as provided for property owned by the Recipient. Federally owned
property need not be otherwise insured unless required by the Terms and
Conditions of the Award. See 2 C.F.R. § 200.310

The Recipient shall require each construction contractor and all
19 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

subcontractors to maintain, during the life of its contract, Workers'
Compensation Insurance, Public Liability Insurance, and such other
types of special coverage required by applicable State or local law.
Where appropriate, the Recipient shall require the prime contractor to
provide Builder’s Risk Insurance as part of the construction contract. In
all cases, the Recipient is responsible for seeing that coverage is obtained
and kept in force. When obtained by the Recipient directly, such
coverage is an eligible project cost.
VI.

DISBURSEMENT OF GRANT FUNDS AND FINANCIAL ADMINISTRATION
A.

PRE-DISBURSEMENT REQUIREMENTS
1. General. The Grants Officer determines the appropriate method of payment. Unless
otherwise specified in a special award condition, the method of payment will be
reimbursement. Disbursements of grant funds will be made by electronic transfer
based on the Recipient’s actual rate of expenditure. EDA will make disbursements
based on the percentage of EDA participation, but in no event for more than the total
sum stated in the Award. The initial disbursement will be made only after the
following conditions have been met:
(a)
(b)
(c)

(d)
(e)

EDA determines that the Recipient has satisfied all applicable Terms
and Conditions of the Award (see 13 C.F.R. § 305.9(b));
The Recipient has completed and submitted Form SF-3881, “ACH
Vendor/Miscellaneous Payment Enrollment Form;”
The Recipient has requested disbursement by submitting Form SF-271,
“Outlay Report and Request for Reimbursement for Construction
Programs” (OMB Control No. 0348-0002), for incurred costs that are
itemized and eligible;
The Recipient certifies that its proportionate share of funds (including
overruns) is on deposit; and
The Recipient meets such other requirements as EDA may establish.

Recipients shall disburse program income, rebates, refunds, contract settlements, and
audit recoveries before requesting additional grant disbursements.
2. Allowable costs. EDA allowable costs are determined by reference to Subpart E of 2
C.F.R. part 200, “Uniform Administrative Requirements, Cost Principles, and Audit
Requirements for Federal Awards. Generally, costs that are allowable include
salaries, supplies and other expenses that are reasonable and necessary for the
completion of the scope of work. Allowable costs must be determined in accordance
with the cost principles.
3. Acceptable costs and contributions. In determining the amount of the non-federal share
of the cost of a project, EDA may provide credit towards the non-federal share of all
contributions both in cash and in-kind, fairly evaluated, including contributions of
space, equipment, assumptions of debt, and services. See section 204(b) of PWEDA
(42 U.S.C. § 3144).
The matching share may include funds from other federal agencies only if authorized by
statute that allows such use, which may be determined by EDA’s reasonable
interpretation of such authority. See 13 C.F.R. § 300.3.
Neither cash nor the value of in-kind contributions may count towards satisfying a costsharing requirement of a grant agreement if it has been or will be counted towards
20 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

satisfying a cost-sharing requirement of another federal grant agreement, a federal
procurement contract, or any other award of federal funds. The eligible applicant must
show that the matching share is committed to the EDA project, will be available as
needed and is not or will not be conditioned or encumbered in any way that would
preclude its use consistent with the requirements of the Award. See 13 C.F.R. § 301.5.
B.

INTERIM DISBURSEMENTS
After the initial disbursement has been made, the Recipient may request interim
disbursements by submitting Form SF-271 and including substantiating invoices and/or
vouchers, as required for reimbursement of EDA’s share of eligible project costs. Interim
disbursements will normally continue until ninety (90) percent of the grant funds have been
disbursed, with the remaining ten (10) percent normally held pending final disbursement and
project close-out.

C.

FINAL DISBURSEMENT
When project construction and final inspection have been completed, or substantially
completed as determined by EDA, and the Recipient has accepted the project from the
contractor, the Recipient can begin the close-out process by submitting the following
documentation to EDA:
1. A request for final disbursement on an executed Form SF-271;
2. A written certification that all costs charged against the Award (EDA share and
non-Federal share) are for eligible activities and represent allowable costs, for
which there is documentation in the Recipient’s records;
3. An executed certificate of final acceptance signed by the Recipient and the Recipient’s
architect/engineer;
4. The Recipient’s certification that its currently valid single or program-specific audit in
accordance with Subpart F of 2 C.F.R. part 200, if applicable, does not contains any
material findings (if the Recipient’s currently valid audit does contain material findings,
the Recipient shall submit the applicable audit preferably via email to the Project
Officer, who will review with the Grants Officer);
5. The Recipient’s certification that its currently valid audit (in accordance with Subpart F
of 2 C.F.R. part 200), if applicable, has been submitted to the Federal Audit
Clearinghouse; and
6. Other documentation as may be required by EDA.
The Recipient will be advised by EDA of costs found eligible, costs found ineligible and
the reasons for findings of ineligibility. If a balance of the grant is due to the Recipient, the
balance will be paid by wire transfer. If the Recipient has received a grant amount in
excess of the amount due the Recipient, the Recipient must refund the excess to EDA. The
Recipient shall contact the Project Officer for refund instructions.

VII.

AWARD AMENDMENTS, APPROVALS, AND NOTIFICATIONS
Between approval and closeout of an EDA construction project, modifications to the Terms and
Conditions may be necessary to resolve unforeseen problems. In most instances, the proposed
modification can be accomplished only if EDA agrees to a formal amendment to the Award.
21 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

A. AMENDMENTS
In order to amend the Award, the Project Officer shall prepare Form CD-451, “Amendment to
Financial Assistance Award,” for execution by both the Regional Director and the Recipient’s
authorized representative. Form CD-451 is required for any of the following amendments to
an Award:
1.
2.
3.
4.
5.
6.
7.
8.

Changes to project scope of work;
Budget revisions requiring additional EDA or non-EDA sources of funds;
Budget revisions that result in cumulative transfers among direct cost categories in
excess of ten (10) percent of the total project cost when the federal share exceeds
$150,000;
The inclusion of certain costs for which EDA’s prior approval is needed under 2 C.F.R.
part 200, “Uniform Administrative Requirements, Cost Principles, and Audit
Requirements for Federal Awards;
Change of site location;
Change to or addition of Recipient;
Time extensions; and
Modifications to the Terms and Conditions of the Award, other than time
extensions.

See 2 C.F.R. § 200.308.
When Form CD-451 is required, the Recipient must submit a request for amendment in
writing to the EDA regional office. If the request is approved, the EDA regional office
completes and transmits the Form CD-451 to the Recipient. The Recipient’s authorized
representative must execute the Form CD-451 and return it to the EDA regional office.
B. TIME SCHEDULE EXTENSIONS
1.

2.

Unless otherwise authorized in 2 CFR § 200.308, or a special award condition, any
extension of the period of performance can only be authorized by the Grants Officer
in writing. A verbal or written assurance of funding from other than the Grants
Officer, including Regional Office staff other than the Grants Officer, does not
constitute authority to obligate funds for programmatic activities beyond the
expiration date of the period of performance.
The Recipient is responsible for implementing the project in accordance with the
project development time schedule contained in the Award. As soon as the Recipient
becomes aware that it will not be possible to meet the project development time
schedule, it must notify the EDA regional office. The Recipient’s notice to EDA must
contain the following information:
(a) An explanation of the reason for the Recipient’s inability to complete work by the
specified date (e.g., a lengthy period of unusual weather delayed the contractor’s
ability to excavate the site, major re-engineering required in order to obtain State or
federal approvals, unplanned environmental mitigation required);
(b) A statement that no other changes to the project are contemplated;
(c) Documentation that demonstrates there is still a bona fide need for the
project; and
(d) A statement that no further delay is anticipated and that the project can be
completed within the revised time schedule.

3. EDA expects construction on a project to start within two (2) years from the date of grant
award. In accordance with EDA policy, the maximum construction start time extension
22 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

that any region can grant is restricted to a date wherein the project will still be completed
within five (5) years from the date of grant award. If the delayed construction start date
might impact the project being completed within five (5) years or any extension beyond
that five (5) year limit must be approved by the Assistant Secretary of Commerce for
Economic Development.
4. EDA reserves the right to withhold disbursements while the Recipient is not in
compliance with the time schedule and to suspend or terminate an Award if the
Recipient fails to proceed with reasonable diligence to accomplish the project as
intended. See also sections IV.C and VII.F. of this Summary.
C.

BUDGET REVISIONS
1. The tabulation of estimated project costs contained in the Award (i.e., the EDA-approved
budget) is the controlling budget plan for the project. The Recipient must notify EDA of
any proposed deviation from the budget or program plans in accordance with 2 C.F.R. §
200.308, including any change in scope of work or the objective of the project (even if
there is no associated budget revision requiring prior written approval). If prior written
approval is not required under 2 C.F.R. § 200.308, the Recipient may request the Grants
Officer’s review of and guidance on proposed revisions to the budget.
2. The transfer of funds from line items other than the contingencies line item may be
permitted, provided there will be no significant adverse effect on the objective of the
line item from which the transfer is to be made.
3. Transfers shall not be permitted if such transfers would cause any Federal
appropriation, or part thereof, to be used for purposes other than those intended. This
transfer authority does not authorize the Recipient to create new budget categories
within an approved budget unless the Grants Officer has provided prior written
approval. See 2 C.F.R. § 200.308.
4. The construction line item will be revised at the time of contract award to reflect the
actual contract amount(s). Underrun amounts shall be transferred to the contingencies
line item. Contingency funds are to be used to address situations resulting from
unknown conditions and changes required for the fulfillment of authorized project
activities under the Award. EDA may approve the use of underrun funds to increase the
EDA share of the project or further improve the project, as long as EDA determines that
the use is consistent with the original purpose of the approved-EDA investment. See 13
C.F.R. § 308.1.

D.

ADDITIONAL EDA FUNDING
1. In accepting financial assistance from EDA, the Recipient agreed to fund any overrun(s)
from non-Federal sources. Additional EDA assistance for a project may not be approved.
To be considered for approval, it must compete with other requests for scarce EDA
funds.
2. If an overrun occurs as a result of the construction contract bid opening, before EDA
will consider a formal request for additional EDA funds, it is necessary for the
Recipient to furnish the following documentation:
(a)

A written statement from the Recipient’s architect/engineer, giving reasons for
his/her professional opinion that redesign of the project within the approved scope,
or using new or additional deductive alternates cannot reasonably be expected to
23 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

(b)

reduce the cost to within the available funds; and
A written statement from the administrative head of the Recipient’s organization
justifying why the Recipient cannot furnish the additional funds required, why
non-EDA sources of funds cannot be secured, and certifying that the Recipient’s
borrowing capacity has been exhausted.

3. EDA’s consideration of a request for additional EDA assistance does not
indicate approval.
See 13 C.F.R. § 305.10.
E.

ADMINISTRATIVE APPROVALS AND NOTIFICATIONS
1. EDA shall issue a written administrative approval for budget revisions that result in the
cumulative transfer among direct cost categories of less than 10 percent of the total
project cost and to approve budget revisions that result in the transfer of funds between
direct and indirect cost categories, as long as those transfers are also less than 10
percent of the total project cost.
2. EDA shall issue a written administrative notification upon EDA’s approval and
acceptance of the Recipient’s documentation of compliance with special award
conditions (for example, compliance with environmental or historic preservation law
requirements) and upon EDA’s change in the Project Officer or other administrative
official assigned to the Recipient’s project, if applicable.

F.

TERMINATION OF INVESTMENT ASSISTANCE
1. In accordance with 2 C.F.R. § 200.339, an Award may be terminated in whole or in part
as follows:
(a)

Termination by EDA for the Recipient’s Failure to Comply with any Term or
Condition of the Award. Examples of recipient failure to comply with terms and
conditions of the award include if:
(i)
(ii)

(b)

Any representation made by the Recipient to EDA in connection with the
application for the Award is incorrect or incomplete in any material
respect;
The project has changed substantially, without EDA approval, so as to
affect significantly the accomplishment of the project as intended
(including an unauthorized use of property as provided in 13 C.F.R. §
314.4.);

(iii)

The Recipient has violated commitments it made in its application and
supporting documents or has violated any of the terms and conditions of
the Award;

(iv)

The conflicts-of-interest rules at 13 C.F.R. § 302.17 are violated; or

(v)

The Recipient fails to report immediately to EDA any change of
authorized representative acting in lieu of or on behalf of the Recipient.

Termination by EDA for Cause. EDA may terminate the Award for cause if
required by a circumstance beyond EDA’s control, such as a Congressional
24 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

mandate.
(c)

Termination by the Recipient. The Recipient may terminate the Award in whole
or in part upon sending the EDA Grants Officer written notification setting forth
the reasons for such termination, the effective date, and, in the case of partial
termination, the portion to be terminated. However, if EDA determines in the
case of partial termination that the reduced or modified portion of the EDA
Award will not accomplish the purposes for which the EDA Award was made,
EDA may terminate the Award in its entirety.

(d)

Termination Upon Mutual Agreement. EDA and the Recipient may mutually
agree to terminate the Award in whole or in part. In such cases, EDA and the
Recipient must agree upon the termination conditions, including the effective
date and, in the case of partial termination, the portion to be terminated.

2. If the Award is wholly or partially terminated, the Recipient remains responsible for
compliance with the requirements in 2 C.F.R. §§ 200.343 and 200.344.
3. Failure to comply with the provisions of this Award may be grounds for appropriate
enforcement action pursuant to 2 C.F.R. § 200.338, including initiating suspension and
debarment proceedings in accordance with 2 CFR parts 180 and 1326. See also 2
C.F.R. § 200.213.
4. In taking any remedy for non-compliance, EDA will provide the Recipient an
opportunity to object and provide information and documentation challenging the
suspension or termination action. See 2 C.F.R. § 200.341.
5. Costs resulting from obligations incurred by the Recipient during a suspension or after
termination of the Award are not allowable unless EDA expressly authorizes them in the
notice of suspension or termination, or subsequently. However, costs during suspension
or after termination are allowable if:
(a)

The costs result from obligations that were properly incurred by the Recipient
before the effective date of the suspension or termination, are not in anticipation of
it; and

(b)

The costs would be allowable if the Award were not suspended or expired
normally at the end of the period of performance in which the termination takes
effect. See 2 C.F.R. § 200.342.

6. When EDA terminates an award prior to the end of the period of performance due to
the Recipient’s material failure to comply with the Award terms and conditions, EDA
must report the termination to the OMB-designated integrity and performance system
accessible through SAM. See 2 C.F.R. § 200.339.
7. Other Federal agencies that consider making an Award to the Recipient during the fiveyear period an EDA termination is available in SAM, must consider that information in
judging whether the Recipient is qualified to receive the Award, when the Federal share
of the Award is expected to exceed $150,000 over the period of performance. See 2
C.F.R. § 200.205.

25 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

VIII. POST-CONSTRUCTION REQUIREMENTS
A. ORGANIZATION-WIDE, PROGRAM-SPECIFIC, AND PROJECT AUDIT
REQUIREMENTS
1. Requirement to have an audit performed. Organization-wide or program- specific
audits must be performed in accordance with the Single Audit Act Amendments of
1996, as implemented by subpart F of 2 C.F.R. part 200. Recipients that expend
$750,000 or more in Federal awards during their fiscal year shall have an audit
conducted for that year in accordance with the requirements set forth in subpart F of 2
C.F.R. part 200.
2.

Requirement to submit audit to Federal Audit Clearinghouse. Within the earlier of 30
calendar days after receipt of the auditor’s report, or nine months after the end of the
audit period, the Recipient must submit a copy of the audit to the Federal Audit
Clearinghouse website at http://harvester.census.gov/sac/.
If it is necessary to submit using paper, the address for submission is:
Federal Audit
Clearinghouse
Bureau of the Census
1201 E. 10th Street
Jeffersonville, IN 47132
Within 90 days of the end of the fiscal year of a Recipient subject to subpart F of
2 C.F.R. part 200, the entity is responsible for notifying the Grants Officer of the
amount of Federal awards, including all EDA and non-EDA awards, the Recipient
expended during its fiscal year.
A Recipient that expends less than $750,000 in Federal awards during its fiscal
year is exempt from Federal audit requirements for that year, except as noted at 2
C.F.R. § 200.503, but records must be available for review and audit by EDA,
DOC, or other designated Government officials.
Failure to provide audit reports within the timeframes specified may result in
appropriate enforcement action, up to and including termination of the Award,
and may jeopardize eligibility for receiving future awards.

3. EDA-specific audit requirements. EDA’s Public Works and Economic Adjustment
Assistance programs generally have specific audit guidelines that will be incorporated
into the Award and may be found in the annual Compliance Supplement, which is
Appendix XI to 2 C.F.R. part 200 and is available on OMB’s website
(https://www.whitehouse.gov/omb/circulars_default). When EDA does not have a
program-specific audit guide available for the program, the auditor will follow the
requirements for a program-specific audit as described in 2 C.F.R. § 200.507. The
Recipient may include a line item in the budget for the cost of the audit for approval. A
copy of the program-specific audit shall be submitted to the Grants Officer.
4. Recipient responsibility. Recipients are responsible for compliance with the above
audit requirements and for informing the Grants Officer of the status of their audit,
including when the relevant audit has been completed and submitted in accordance
with the requirements of this section. In accordance with 2 C.F.R. § 200.331(d)(3),
pass-through entities are responsible for issuing a management decision for any audit
findings pertaining to the Award provided to a subrecipient.
26 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

5. Requirement to submit audit to EDA. If the Recipient’s currently valid audit required
under subpart F of 2 C.F.R. part 200 contains material findings, the Recipient must
submit a copy of the audit to the Project Officer, who will review it with the Grants
Officer.
B.

DEPARTMENTAL AUDIT RESOLUTION PROCESS
1. Under the Inspector General Act of 1978, as amended (5 U.S.C. App. 3, § 1 et seq.),
EDA or the Department’s Office of the Inspector General (“OIG”) may conduct an audit
of the Award at any time. The Department’s Inspector General, or any of his or her duly
authorized representatives, shall have access to all pertinent books, documents, papers
and records of the Recipient, whether written, printed, recorded, produced or reproduced
by any electronic, mechanical, magnetic or other process or medium, in order to make
audits, inspections, excerpts, transcripts or other examinations as authorized by law.
This right also includes timely and reasonable access to the Recipient’s personnel for the
purpose of interview and discussion related to such documents. See 2 C.F.R. § 200.336
and 13 C.F.R. § 302.14.
When the OIG requires a program audit on the Award, the OIG will usually make the
arrangements to audit the Award, whether the audit is performed by an independent
accountant under contract with the Department, OIG personnel, or any other federal,
State or local audit entity.
2. An audit of the Award may result in the disallowance of costs incurred by the Recipient
and the establishment of a debt (an account receivable) due to EDA. For this
reason,
the Recipient should take seriously its responsibility to respond to all audit findings and
recommendations with adequate explanations and supporting evidence when disputing
audit determinations.
3. In accordance with the Federal Register notice dated January 27, 1989 (54 Fed.
Reg. 4053), a Recipient has the following opportunities to dispute the proposed
disallowance of costs and the establishment of a debt after an audit:
(a) The Recipient has thirty (30) business days from the date of the transmittal of the
OIG’s “Draft Audit Report” to submit written comments and documentary
evidence.
(b) The Recipient has thirty (30) business days from the date of the transmittal of the
“Final Audit Report” to submit written comments and documentary evidence. There
will be no extension of this deadline.
(c) EDA will review any documentary evidence submitted by the Recipient, and will
notify the Recipient of the results in an “Audit Resolution Determination Letter.”
The Recipient has thirty (30) business days from the date of receipt of the Audit
Resolution Determination Letter to submit a written appeal. There will be no
extension of this deadline. The appeal is the last opportunity for the Recipient to
submit written comments and documentary evidence that dispute the validity of the
Audit Resolution Determination Letter.
(d) An appeal of the Audit Resolution Determination Letter does not prevent the
establishment of any audit-related debt nor does it prevent the accrual of interest
on such debt. If the Audit Resolution Determination Letter is overruled or
modified on appeal, appropriate corrective action will be taken retroactively. An
appeal will stay the offset of funds owed by the Recipient against funds due to the
Recipient.
(e) EDA or the Department, as applicable, will review the Recipient’s appeal. EDA
27 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

will notify the Recipient of the results in an “Appeal Determination Letter.” After
the opportunity to appeal has expired or after the appeal determination has been
rendered, EDA or the Department will not accept any further documentary
evidence from the Recipient. No other EDA or Department administrative
appeals are available.
C.

PROPERTY MANAGEMENT
1. Any property that is acquired or improved, in whole or in part, with EDA investment
assistance, whether through a grant or a cooperative agreement, is subject to the
requirements of PWEDA and the regulations at 13 C.F.R. part 314. Requirements
related to title, authorized use, successor Recipient, property disposition, and Federal
Share (as defined in 13 C.F.R. § 314.5) are set out at 13 C.F.R. part 314.
2. During the estimated useful life of the project involving the acquisition, construction or
improvement of a building, as determined by EDA, EDA retains a Federal Interest in
the project property. See section III.A. of this Summary; 13 C.F.R. § 314.2; and 2
C.F.R. §§ 200.41, 200.316. The Federal Interest secures compliance with the
ownership, purpose, scope and intended use of the EDA project and may be reflected
by a recorded lien, covenant, statement or other recordable instrument setting forth
EDA’s property interest (e.g., a mortgage). See 13 C.F.R. § 314.8.
3. A Recipient may request a release of the Federal Interest in property acquired or
improved with EDA investment assistance and fully compensate EDA for its Federal
Share in the property. A release pursuant to 13 C.F.R. § 314.2(b) gives the Recipient
title to the property free and clear of any further governmental interest except with
respect to non-discrimination requirements set forth in 13 C.F.R. § 302.20 and the
inherently religious activities prohibition. See 13 C.F.R. §§ 302.20 and 314.10.
A Recipient may request a release of the Federal Interest in project assets where the
estimated useful life has expired or for projects that are subject to an estimated useful life
in excess of the statutory twenty (20) year limitation. See section 601(d)(2) of PWEDA
(42 U.S.C. § 3211) and 13 C.F.R. § 314.10. In that case, EDA may release its Federal
Interest, however, the property acquired or improved with EDA investment assistance
may not be used: (a) in violation of the nondiscrimination requirements set forth in 13
C.F.R. § 302.20; or (b) for inherently religious activities prohibited by applicable federal
law.

D.

CLOSEOUT PROCEDURES
1. After construction is completed and the project is closed out financially, the Recipient
has an ongoing responsibility to properly administer, operate and maintain the project
for its estimated useful life (as determined by EDA) in accordance with its original
purpose. See 13 C.F.R. § 302.12. The Recipient must comply with all Award
requirements and maintain records to document such compliance, which shall be made
available for inspection by EDA or other government officials as required. When
project construction and final inspection have been completed, or substantially
completed as determined by EDA, and the Recipient has accepted the project from the
contractor, the Recipient may begin the closeout process by submitting the following
documentation to EDA:
(a)
(b)

A request for final disbursement on an executed SF-271.
A written certification that all costs charged against the Award (EDA and non- EDA
shares) are eligible activities and represent allowable costs, for which there is
documentation in the Recipient’s records.
28 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

(c)
(d)

(e)
(f)
(g)

An executed certification of final acceptance signed by the Recipient and the
Recipient’s architect/engineer.
The Recipient’s certification that its currently valid single or program-specific
audit in accordance with subpart F of 2 C.F.R. part 200, if applicable, does not
contain material findings (if the Recipient’s currently valid audit does contain
material findings, the Recipient shall submit the applicable audit preferably via
email to the Project Officer, who will review with the Grants Officer).
The Recipient’s certification that its currently valid audit (in accordance with
subpart F of 2 C.F.R. part 200), if applicable, has been submitted to the Federal
Audit Clearinghouse.
A copy of the completed “Checklist for Final Disbursement/Project Closeout”
available on the Post-Approval Construction Tool.
Other documentation as may be required by EDA.

2. If a Recipient chooses not to complete and submit the “Project Close-out Checklist”
available on the Post-Approval Construction Tool, the Recipient must provide EDA the
following documentation in addition to that listed above:
(a)
(b)
(c)
(d)

Verification of compliance with all Award terms and conditions, including
special award conditions (if not already provided).
Verification of procurement of permanent insurance for above-ground facilities.
Verification of compliance with the requirement that all changes to the project
have been brought to EDA’s attention.
Verification of recipient’s compliance with the requirement to retain all records
pertinent to the Award for three years from the date of submission of the final
expenditure report, with the following exceptions:
(i)

(ii)
(iii)
(e)
(f)
(g)
(h)
(i)

(j)

(k)

If any litigation, claim, or audit begins before the expiration of the threeyear period, the records shall be retained until all litigation, claims or
audit findings involving the records have been resolved and final action
taken;
Records for real property and equipment acquired with federal funds
must be retained for three years after final disposition; and
When records are transferred or maintained by EDA, the three-year
retention requirement is not applicable to the recipient.

Verification of receipt of as-built drawings from the contractor or the architect/
engineer.
Certification that there are no outstanding Davis-Bacon Act or local labor
employment violations.
Any change, lien, mortgage, or other encumbrance relating to the ownership of
the property acquired or improved with EDA assistance.
Documentation on any unresolved contract/contractor disputes.
Documentation verifying execution and recordation in the appropriate
jurisdiction of a lien or covenant of purpose, use, and ownership in favor of
EDA, if a lien or covenant of purpose has not already been executed and
recorded.
Certification that the project facility will be maintained by the recipient for its
entire estimated useful life as determined by EDA, during which period the
recipient shall not alienate its ownership or alter the use and purpose of the EDAassisted facility without EDA’s written permission.
Any other documentation required by the EDA Engineer/Construction Manager
or Project Officer to ensure compliance with the terms and conditions of the
Award.
29 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

3. The Recipient shall submit, within ninety (90) calendar days after the project closeout
date, all financial, performance and other reports as required by the Terms and
Conditions of the Award. The Grants Officer may extend the ninety (90) calendar day
closeout period upon a written request from the Recipient.
4. Unless EDA authorizes an extension, the Recipient must liquidate all obligations
incurred under the Award no later than ninety (90) calendar days after acceptance of the
project from the contractor or within ninety (90) calendar days of the expiration date of
the Award, whichever occurs earlier, as specified in the Terms and Conditions of the
Award.
5. The closeout of an Award does not affect any of the following:
(a) The right of EDA to disallow costs and recover funds on the basis of a later audit or
other project review;
(b) The Recipient’s obligation to return any funds due as a result of later corrections or
other transactions;
(c) Requirements for property management, records retention and performance
measurement reports; or
(d) Single or program-specific audit requirements in accordance with subpart F of 2
C.F.R. part 200 or other project review;
(e) The Recipient’s obligation to return any funds due as a result of later corrections or
other transactions;
(f) Requirements for property management, records retention and performance
measurement reports; or
(g) Single or program-specific audit requirements in accordance with subpart F of 2
C.F.R. part 200.

30 

OMB Number: 0610-0096
Expiration Date: 11/30/2021

IX.

APPENDIX
The following documents are available from the Office of Management and Budget’s, the
Department of Commerce’s, and the Government Printing Office’s websites at
www.whitehouse.gov/omb/, www.commerce.gov, www.gpoaccess.gov, public libraries, and
other sources. Each document listed below contains a link that will take you directly to that
document on the internet.
1.

2 C.F.R. part 200, Uniform Administrative Requirements, Cost Principles, and Audit
Requirements for Federal Awards

2.

2 C.F.R. part 180, OMB Guidelines to Agencies on Governmentwide Debarment and
Suspension (Nonprocurement)

3.

2 C.F.R. part 1326, Department of Commerce regulations on Nonprocurement
Debarment and Suspension

4.

2 C.F.R. part 182, Governmentwide Requirements for Drug-Free
Workplace (Financial Assistance)

5.

13 C.F.R. Chapter III (EDA’s regulations)

6.

48 C.F.R. part 31, Contract Cost Principles and Procedures

7.

49 C.F.R. part 24, Uniform Relocation Assistance and Real Property
Acquisition for Federal and Federally-Assisted Programs

8.

Davis Bacon Wage Rate Determinations: www.wdol.gov/

31 


File Typeapplication/pdf
File TitleMicrosoft Word - EDA Summary of Construction Standards -August 2016
Authortkorbas
File Modified2021-07-21
File Created2017-05-19

© 2024 OMB.report | Privacy Policy