5900-454 Fuel Line Test Data

Certification and Compliance Requirements for Nonroad Spark-ignition Engines (Renewal)

5900-454_fuel-line-test-data-2016-04-08.xlsx

Certification and Compliance Requirements for Nonroad Spark-ignition Engines (Renewal)

OMB: 2060-0338

Document [xlsx]
Download: xlsx | pdf

Overview

Sheet1
Sheet2


Sheet 1: Sheet1

Manufacturer:


Manufacturer code:











































































Emission Family Name:


Model Year:








Paperwork Reduction Act Notice
OMB No. 2060-0338


















CE10 (Fuel C + 10% Ethanol)














This collection of information is approved by OMB under the Paperwork Reduction Act, 44 U.S.C. 3501 et seq. (OMB Control No. 2060-0338). Responses to this collection of information are mandatory (40 CFR 1060). An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB control number. The public reporting and recordkeeping burden for this collection of information is estimated to be 4 hour per response. Send comments on the Agency’s need for this information, the accuracy of the provided burden estimates and any suggested methods for minimizing respondent burden to the Regulatory Support Division Director, U.S. Environmental Protection Agency (2821T), 1200 Pennsylvania Ave., NW, Washington, D.C. 20460. Include the OMB control number in any correspondence. Do not send the completed form to this address.
Approval Expires on


















E10 (EPA Cert Gasoline + 10% Ethanol)
Test Facility:

Name Preconditiong: At least 4 weeks @ 43 C ± 5C







1/31/2022






















Address










EPA Form 5900-453


















23C




Test Temperature:
23C If 40 C is chosen, the permeation standard does not change



























40C





































Test Fuel: CE10 (Fuel C + 10% Ethanol)

Sample Length (mm):







































































Inner Diameter (mm):





































For Straight Line hoses
































Internal Surface Area (m2): 0

Internal Surface Area as Calculated by Manufacturer from non-straight line hoses 0




























Internal Surface area (m2) used in calculation:

0
































Daily Measurements - Do not leave blank rows between data points





















Date Sample 1
Daily measurement (g)
Sample 1
Permeation Losses (g/day)
Sample 1
Daily permeation rate (g/m2/d)
Date Sample 2
Daily measurement (g)
Sample 2
Permeation Losses (g/day)
Sample 2
Daily permeation rate (g/m2/d)
Date Sample 3
Daily measurement (g)
Sample 3
Permeation Losses (g/day)
Sample 3
Daily permeation rate (g/m2/d)
Date Sample 4
Daily measurement (g)
Sample 4
Permeation Losses (g/day)
Sample 4
Daily permeation rate (g/m2/d)
Date Sample 5
Daily measurement (g)
Sample 5
Permeation Losses (g/day)
Sample 5
Daily permeation rate (g/m2/d)
Date Sample 6
Daily measurement (g)
Sample 6
Permeation Losses (g/day)
Sample 6
Daily permeation rate (g/m2/d)



















-- --

-- --

-- --

-- --

-- --

-- --














































































































































































































































































































































































































































































































































































































AVERAGE























































































































Maximum Average Permeation Level (g/m2/d):














































































Maximum Average Permeation Loss (g/day):
(Please enter this value in Verify as the "Maximum Permeation Loss")





































Sheet 2: Sheet2

At least 4 weeks @ 43 C ± 5C
At least 8 weeks @ 23 C ± 5C


CE10 (Fuel C + 10% Ethanol)
E10 (EPA Cert Gasoline + 10% Ethanol)
File Typeapplication/vnd.openxmlformats-officedocument.spreadsheetml.sheet
File Modified0000-00-00
File Created0000-00-00

© 2024 OMB.report | Privacy Policy