60 Day FRN

Federal Register / Vol. 85, No. 226 / Monday, November 23, 2020 / Notices
this notice to www.reginfo.gov/public/
do/PRAMain. Find this particular
information collection request by
selecting ‘‘Department of Education’’
under ‘‘Currently Under Review,’’ then
check ‘‘Only Show ICR for Public
Comment’’ checkbox.
FOR FURTHER INFORMATION CONTACT: For
specific questions related to collection
activities, please contact Christine
Grassman, 202–245–6973.
SUPPLEMENTARY INFORMATION: The
Department of Education (ED), in
accordance with the Paperwork
Reduction Act of 1995 (PRA) (44 U.S.C.
3506(c)(2)(A)), provides the general
public and Federal agencies with an
opportunity to comment on proposed,
revised, and continuing collections of
information. This helps the Department
assess the impact of its information
collection requirements and minimize
the public’s reporting burden. It also
helps the public understand the
Department’s information collection
requirements and provide the requested
data in the desired format. ED is
soliciting comments on the proposed
information collection request (ICR) that
is described below. The Department of
Education is especially interested in
public comment addressing the
following issues: (1) Is this collection
necessary to the proper functions of the
Department; (2) will this information be
processed and used in a timely manner;
(3) is the estimate of burden accurate;
(4) how might the Department enhance
the quality, utility, and clarity of the
information to be collected; and (5) how
might the Department minimize the
burden of this collection on the
respondents, including through the use
of information technology. Please note
that written comments received in
response to this notice will be
considered public records.
Title of Collection: Report of the
Randolph-Sheppard Vending Facility
Program.
OMB Control Number: 1820–0009.
Type of Review: A revision of a
currently approved collection.
Respondents/Affected Public: State,
Local, and Tribal Governments.
Total Estimated Number of Annual
Responses: 51.
Total Estimated Number of Annual
Burden Hours: 1,199.
Abstract: The Vending Facility
Program authorized by the RandolphSheppard Act provides persons who are
blind with remunerative employment
and self-support through the operation
of vending facilities on Federal and
other property. Under the Randolph
Sheppard Program, State licensing
agencies (SLAs) recruit, train, license

VerDate Sep<11>2014

17:07 Nov 20, 2020

Jkt 253001

and place individuals who are blind as
operators of vending facilities
(including cafeterias, snack bars,
vending machines, etc.) located on
federal and other properties. In statute
at 20 U.S.C. 107a(6)(a), the Secretary of
Education is directed through the
Commissioner of the Rehabilitation
Services Administration (RSA) to
conduct periodic evaluations of the
programs authorized under the
Randolph-Sheppard Act. The
information to be collected is a
necessary component of the evaluation
process and forms the basis for annual
reporting. These data are also used to
understand the distribution type and
profitability of vending facilities
throughout the country. Such
information is useful in providing
technical assistance to SLAs and
property managers. The Code of Federal
Regulations, at 34 CFR 395.8, specifies
that vending machine income received
by the State from Federal property
managers can be distributed to blind
vendors in an amount not to exceed the
national average income for blind
vendors. This amount is determined
through data collected using RSA–15:
Report of Randolph-Sheppard Vending
Facility Program. In addition, the
collection of information ensures the
provision and transparency of activities
referenced in 34 CFR 395.12 related to
disclosure of program and financial
information. The Department is
requesting a revision to the information
collection regarding the statute at 20
U.S.C. 107a(6)(a), the Secretary of
Education is directed through the
Commissioner of the Rehabilitation
Services Administration (RSA) to
conduct periodic evaluations of the
programs authorized under the
Randolph-Sheppard Act and the
increase in burden is due to adding
instructions, adding an acquisition
change and a new element.
Dated: November 18, 2020.
Kate Mullan,
PRA Coordinator, Strategic Collections and
Clearance, Governance and Strategy Division,
Office of Chief Data Officer, Office of
Planning, Evaluation and Policy
Development.
[FR Doc. 2020–25776 Filed 11–20–20; 8:45 am]
BILLING CODE 4000–01–P

PO 00000

Frm 00050

Fmt 4703

Sfmt 4703

74713

DEPARTMENT OF ENERGY
[EERE–2020–BT–CRT–0018]

Proposed Agency Information
Collection Extension
Office of Energy Efficiency and
Renewable Energy, U.S. Department of
Energy.
ACTION: Information collection
extension, with changes; notice and
request for comment.
AGENCY:

The U.S. Department of
Energy (DOE) intends to extend with
changes for three years with the Office
of Management and Budget (OMB), the
Certification Reports, Compliance
Statements, Application for a Test
Procedure Waiver, and Recordkeeping
for Consumer Products and
Commercial/Industrial Equipment
subject to Energy or Water Conservation
Standards Package under OMB No.
1910–1400.
DATES: Written comments and
information are requested and will be
accepted on or before January 22, 2021.
ADDRESSES: Interested persons are
encouraged to submit comments using
the Federal eRulemaking Portal at
http://www.regulations.gov. Follow the
instructions for submitting comments.
Alternatively, interested persons may
submit comments, identified by docket
number EERE–2020–BT–CRT–0018, by
any of the following methods:
1. Federal eRulemaking Portal: http://
www.regulations.gov. Follow the
instructions for submitting comments.
2. Email: to
InfoCollection2020CRT0018@
ee.doe.gov. Include docket number
EERE–2020–BT–CRT–0018 in the
subject line of the message.
3. Postal Mail: Appliance and
Equipment Standards Program, U.S.
Department of Energy, Building
Technologies Office, Mailstop EE–5B,
1000 Independence Avenue SW,
Washington, DC 20585–0121.
Telephone: (202) 287–1445. If possible,
please submit all items on a compact
disc (‘‘CD’’), in which case it is not
necessary to include printed copies.
4. Hand Delivery/Courier: Appliance
and Equipment Standards Program, U.S.
Department of Energy, Building
Technologies Office, 950 L’Enfant Plaza
SW, Suite 600, Washington, DC 20024.
Telephone: (202) 287–1445. If possible,
please submit all items on a CD, in
which case it is not necessary to include
printed copies.
No telefacsimilies (faxes) will be
accepted.
Docket: The docket for this activity,
which includes Federal Register
SUMMARY:

E:\FR\FM\23NON1.SGM

23NON1

74714

Federal Register / Vol. 85, No. 226 / Monday, November 23, 2020 / Notices

notices, comments, and other
supporting documents/materials, is
available for review at http://
www.regulations.gov. All documents in
the docket are listed in the http://
www.regulations.gov index. However,
some documents listed in the index,
such as those containing information
that is exempt from public disclosure,
may not be publicly available.
The docket web page can be found at
http://www.regulations.gov/
#!docketDetail;D=EERE-2020-BT-CRT0018. The docket web page will contain
simple instructions on how to access all
documents, including public comments,
in the docket.
FOR FURTHER INFORMATION CONTACT: Ms.
Catherine Rivest, U.S. Department of
Energy, Office of Energy Efficiency and
Renewable Energy, Building
Technologies Office, EE–5B, 1000
Independence Avenue SW, Washington,
DC 20585–0121. Telephone: (202) 586–
7335. Email:
ApplianceStandardsQuestions@
ee.doe.gov.
Comments
are invited on: (a) Whether the proposed
collection of information is necessary
for the proper performance of the
functions of the agency, including
whether the information shall have
practical utility; (b) the accuracy of the
agency’s estimate of the burden of the
proposed collection of information,
including the validity of the
methodology and assumptions used; (c)
ways to enhance the quality, utility, and
clarity of the information to be
collected; and (d) ways to minimize the
burden of the collection of information
on respondents, including through the
use of automated collection techniques
or other forms of information
technology.
This information collection request
contains:
(1) OMB No.: 1910–1400;
(2) Information Collection Request
Title: Certification Reports, Compliance
Statements, Application for a Test
Procedure Waiver, Application for
Extension of Representation
Requirements, Labeling, and
Recordkeeping for Consumer Products
and Commercial/Industrial Equipment
subject to Federal Energy or Water
Conservation Standards;
(3) Type of Request: Revision with
changes;
(4) Purpose:
Pursuant to the Energy Policy and
Conservation Act, as amended (‘‘EPCA’’
or ‘‘the Act’’),1 Public Law 94–163 (42

SUPPLEMENTARY INFORMATION:

1 All references to EPCA in this document refer
to the statute as amended through America’s Water

VerDate Sep<11>2014

17:07 Nov 20, 2020

Jkt 253001

U.S.C. 6291–6317, as codified), DOE
regulates the energy efficiency of a
number of consumer products, and
commercial and industrial equipment.
Title III, Part B 2 of EPCA established the
Energy Conservation Program for
Consumer Products Other Than
Automobiles, which sets forth a variety
of provisions designed to improve
energy efficiency of covered consumer
products (‘‘covered products’’). Title III,
Part C 3 of EPCA, added by Public Law
95–619, Title IV, § 441(a), established
the Energy Conservation Program for
Certain Industrial Equipment, which
sets forth a variety of provisions
designed to improve energy efficiency of
covered commercial and industrial
equipment (collectively referred to as
‘‘covered equipment’’).
Covered products and covered
equipment are described in 10 CFR
parts 429, 430, and 431. These covered
products and covered equipment,
including all product or equipment
classes, include: (1) Consumer
refrigerators, refrigerator-freezers and
freezers; (2) Room air conditioners; (3)
Central air conditioners and central air
conditioning heat pumps; (4) Consumer
water heaters; (5) Consumer furnaces
and boilers; (6) Dishwashers; (7)
Residential clothes washers; (8) Clothes
dryers; (9) Direct heating equipment;
(10) Cooking products; (11) Pool heaters;
(12) Television sets; (13) Fluorescent
lamp ballasts; (14) General service
fluorescent lamps, general service
incandescent lamps, and incandescent
reflector lamps; (15) Faucets; (16)
Showerheads; (17) Water closets; (18)
Urinals; (19) Ceiling fans; (20) Ceiling
fan light kits; (21) Torchieres; (22)
Compact fluorescent lamps; (23)
Dehumidifiers; (24) External power
supplies; (25) Battery chargers; (26)
Candelabra base incandescent lamps
and intermediate base incandescent
lamps; (27) Commercial warm air
furnaces; (28) Commercial refrigerators,
freezers, and refrigerator-freezers; (29)
Commercial heating and air
conditioning equipment; (30)
Commercial water heating equipment;
(31) Automatic commercial ice makers;
(32) Commercial clothes washers; (33)
Distribution transformers; (34)
Illuminated exit signs; (35) Traffic signal
modules and pedestrian modules; (36)
Commercial unit heaters; (37)
Commercial pre-rinse spray valves; (38)
Refrigerated bottled or canned beverage
Infrastructure Act of 2018, Public Law 115–270
(Oct. 23, 2018).
2 For editorial reasons, upon codification in the
U.S. Code, Part B was redesignated Part A.
3 For editorial reasons, upon codification in the
U.S. Code, Part C was redesignated Part A–1.

PO 00000

Frm 00051

Fmt 4703

Sfmt 4703

vending machines; (39) Walk-in coolers
and walk-in freezers and certain
components; (40) Metal halide lamp
ballasts and fixtures; (41) Integrated
light-emitting diode lamps; (42) General
service lamps; (43) Furnace fans; (44)
Pumps; (45) Commercial packaged
boilers; (46) Consumer miscellaneous
refrigeration equipment; (47) Portable
air conditioners; (48) Compressors; (49)
Electric motors; (50) Small electric
motors; (51) rough service lamps; and
(52) vibration service lamps.
Under EPCA, DOE’s energy
conservation program consists
essentially of four parts: (1) Testing, (2)
labeling, (3) Federal energy conservation
standards, and (4) certification and
enforcement procedures. For consumer
products, relevant provisions of the Act
specifically include definitions (42
U.S.C. 6291), energy conservation
standards (42 U.S.C. 6295), test
procedures (42 U.S.C. 6293), labeling
provisions (42 U.S.C. 6294), and the
authority to require information and
reports from manufacturers (42 U.S.C.
6296). For covered equipment, relevant
provisions of the Act include definitions
(42 U.S.C. 6311), energy conservation
standards (42 U.S.C. 6313), test
procedures (42 U.S.C. 6314), labeling
provisions (42 U.S.C. 6315), and the
authority to require information and
reports from manufacturers (42 U.S.C.
6316).
DOE is seeking to renew its
information collection related to the
following aspects of the appliance
standards program: (1) Gathering data
and submitting certification and
compliance reports for each basic model
distributed in commerce in the U.S.
including supplemental testing
instructions for certain commercial
equipment; (2) maintaining records
underlying the certified ratings for each
basic model including test data and the
associated calculations; (3) applications
for a test procedure waiver, which
manufacturers may elect to submit if
they manufacture a basic model that
cannot be tested pursuant to the DOE
test procedure; (4) applications
requesting an extension of the date by
which representations must be made in
accordance with any new or amended
DOE test procedure; and (5) labeling.
DOE’s certification and compliance
activities ensure accurate and
comprehensive information about the
energy and water use characteristics of
covered products and covered
equipment sold in the United States.
Manufacturers of all covered products
and covered equipment must submit a
certification report before a basic model
is distributed in commerce, annually
thereafter, and if the basic model is

E:\FR\FM\23NON1.SGM

23NON1

Federal Register / Vol. 85, No. 226 / Monday, November 23, 2020 / Notices
redesigned in such a manner to increase
the consumption or decrease the
efficiency of the basic model such that
the certified rating is no longer
supported by the test data. Additionally,
manufacturers must report when
production of a basic model has ceased
and is no longer offered for sale as part
of the next annual certification report
following such cessation. DOE requires
the manufacturer of any covered
product or covered equipment to
establish, maintain, and retain the
records of certification reports, of the
underlying test data for all certification
testing, and of any other testing
conducted to satisfy the requirements of
part 429, part 430, and/or part 431.
Certification reports provide DOE and
consumers with comprehensive, up-todate efficiency information and support
effective enforcement.
As the result of a negotiated
rulemaking, DOE adopted additional
certification requirements for
commercial HVAC, water heater, and
refrigeration equipment. Specifically,
DOE requires manufacturers of
commercial refrigeration equipment and
some types of commercial HVAC
equipment to submit a PDF with
specific testing instructions to be used
by the Department during verification
and enforcement testing. Manufacturers
of commercial water heating equipment
and some types of commercial HVAC
equipment have the option of
submitting a PDF with additional testing
instructions at the manufacturer’s
discretion. For additional information
on the negotiated rulemaking or
supplemental testing instructions see
docket number EERE–2013–BT–NOC–
0023.
On December 18, 2014, Congress
enacted the EPS Service Parts Act of
2014 (Pub. L. 113–263, ‘‘Service Parts
Act’’). That law exempted
manufacturers of certain external power
supplies (‘‘EPSs’’) that were made
available as service and spare parts for
end-use products manufactured before
February 10, 2016, from the energy
conservation standards that DOE
promulgated in its February 2014 rule.
See 79 FR 7846 (Feb. 10, 2014).
Additionally, the Service Parts Act
permits DOE to require manufacturers of
an EPS that is exempt from the 2016
standards to report to DOE the total
number of such EPS units that are
shipped annually as service and spare
parts and that do not meet those
standards. (42 U.S.C. 6295(u)(5)(A)(ii))
DOE may also limit the applicability of
the exemption if the Secretary
determines that the exemption is
resulting in a significant reduction of
the energy savings that would result in

VerDate Sep<11>2014

17:07 Nov 20, 2020

Jkt 253001

the absence of the exemption. (42 U.S.C.
6295(u)(5)(A)(iii)) In a final rule
published on May 16, 2016, DOE
adopted reporting requirements for EPS
manufacturers to provide the total
number of exempt EPS units sold as
service and spare parts for which the
manufacturer is claiming exemption
from the current standards. 81 FR
30157.
On April 30, 2015, Congress enacted
the Energy Efficiency Improvement Act
of 2015 (Pub. L. 114–11, ‘‘Energy
Efficiency Improvement Act’’). That law
established definitions and energy
conservation standards for grid-enabled
water heaters that DOE promulgated in
its August 2015 Final Rule. See 80 FR
48004 (Aug. 11, 2015). Additionally, the
Energy Efficiency Improvement Act
mandates DOE to require manufacturers
of grid-enabled water heaters to report
to DOE the total number of such units
that are shipped annually. (42 U.S.C.
6295(e)(6)(C)(i))
DOE currently requires manufacturers
or their party representatives to prepare
and submit certification reports and
compliance statements using DOE’s
electronic web-based tool, the
Compliance and Certification
Management System (CCMS), which is
the primary mechanism for submitting
certification reports to DOE. CCMS
currently has product and equipment
specific templates which manufacturers
are required to use when submitting
certification data to DOE. DOE believes
the availability of electronic filing
through the CCMS system reduces
reporting burdens, streamlines the
process, and provides the Department
with needed information in a
standardized, more accessible form.
This electronic filing system also
ensures that records are recorded in a
permanent, systematic way.
Manufacturers also may rely on CCMS
reporting to satisfy certain reporting
requirements established by the Federal
Trade Commission (‘‘FTC’’). EPCA
directs the FTC generally to prescribe
labeling rules for the consumer products
subject to energy conservation standards
under EPCA. (42 U.S.C. 6296) The
required labels generally must disclose
the estimated annual operating cost of
such product (determined in accordance
with Federal test procedures); and
information respecting the range of
estimated annual operating costs for
covered products to which the rule
applies. (42 U.S.C. 6296(c)(1)) Pursuant
to EPCA, the FTC prescribed the Energy
Labeling Rule, which in part, requires
manufacturers to attach yellow
EnergyGuide labels to many of the
covered consumer products. See 16 CFR
part 305. EnergyGuide labels for most

PO 00000

Frm 00052

Fmt 4703

Sfmt 4703

74715

products subject to the FTC labeling
requirement contain three key
disclosures: Estimated annual energy
cost (16 CFR 305.5); a product’s energy
consumption or energy efficiency rating
as determined from DOE test procedures
(Id.); and a comparability range
displaying the highest and lowest
energy costs or efficiency ratings for all
similar models (16 CFR 305.10).
The Energy Labeling Rule also
contains reporting requirements for
most products, under which
manufacturers must submit data to the
FTC both when they begin
manufacturing new models and on an
annual basis thereafter. 16 CFR 305.8.
These reports must contain, among
other things, estimated annual energy
consumption or energy efficiency
ratings, similar to what is required
under DOE’s reporting requirement. Id.
Prior to 2013, FTC collected energy data
on products subject to the Energy
Labeling Rule separate from DOE
through paper and email submissions to
the FTC. This arrangement required
manufacturers to submit nearly
duplicative reports to DOE and FTC.
However, in 2013 the FTC
streamlined and harmonized its
reporting requirements by giving
manufacturers the option to report FTCrequired data through DOE’s CCMS, in
lieu of the traditional practice of
submitting directly to FTC. 78 FR 2200
(Jan. 10, 2013); 16 CFR 305.8(a)(1). As
such, the CCMS reduces duplicative
reporting for manufacturers of covered
consumer products that are also
required to report under the FTC Energy
Label Rule.
DOE allows manufacturers of both
consumer products and/or commercial
equipment to apply for a test procedure
waiver. Manufacturers may submit an
application for a test procedure waiver
at his or her discretion if it is
determined that the basic model for
which the petition for waiver was
submitted contains one or more design
characteristics that prevents testing of
the basic model according to the
prescribed test procedures, or if the
prescribed test procedures may evaluate
the basic model in a manner so
unrepresentative of its true energy
consumption characteristics as to
provide materially inaccurate
comparative data. The Department
currently uses and will continue to use
the information submitted in the
application for a waiver as the basis for
granting or denying the petition. See 10
CFR 430.27 for additional information
on petitions for waivers and for
consumer products. See 10 CFR 431.401
for additional information on petitions
for waivers for commercial equipment.

E:\FR\FM\23NON1.SGM

23NON1

74716

Federal Register / Vol. 85, No. 226 / Monday, November 23, 2020 / Notices

DOE also allows manufacturers of
both consumer products and/or
commercial equipment to submit
applications requesting an extension of
the date by which representations must
be made in accordance with any new or
amended DOE test procedure. DOE may
grant extensions of up to 180 days if it
determines that making such
representations would impose an undue
hardship on the petitioner. The
Department currently uses and will
continue to use the information
submitted in these applications as the
basis for granting or denying the
petition.
In addition to the FTC labeling
requirements for consumer products
discussed, EPCA directs DOE to
establish labeling requirements for
covered industrial and commercial
equipment when specified criteria is
met. If the Department has prescribed
test procedures for any class of covered
equipment, a labeling rule applicable to
such class of covered equipment must
be prescribed. (42 U.S.C. 6315(a)) EPCA,
however, requires that certain criteria
must be met prior to DOE prescribing a
given labeling rule. Specifically, DOE
must determine that: (1) Labeling is
technologically and economically
feasible with respect to any particular
equipment class; (2) significant energy
savings will likely result from such
labeling; and (3) labeling is likely to
assist consumers in making purchasing
decisions. (42 U.S.C. 6315(h)) DOE has
established labeling requirements under
the authority in 42 U.S.C. 6315 for
electric motors (10 CFR 431.31), walk-in
coolers and freezers (10 CFR 431.305),
and pumps (10 CFR 431.466).
(4) Proposed changes to the
information collection, including
description of additional information
that would be collected.
DOE is considering revisions to the
CCMS that would facilitate a reduction
in duplicative reporting under the
California’s Appliance Efficiency
Regulations, similar to what was
achieved with the FTC. Under its
Appliance Efficiency Regulations,
California requires manufacturers to
certify and report to the California
Energy Commission, energy efficiency
data of certain consumer products. See,
California Code of Regulations (CCR),
Title 20, section 1606. For consumer
products that are reported to the
California Energy Commission and are
subject to Federal test procedures, the
California regulations generally require
submission of data from those Federal
test procedures (i.e., the same data
reported to DOE). DOE is considering
adding fields to the CCMS that would
allow the California Energy Commission

VerDate Sep<11>2014

17:07 Nov 20, 2020

Jkt 253001

to accept a CCMS report in satisfaction
of the state reporting requirement.
Submission of the additional
information would not be mandatory
(from DOE’s perspective) and would
consist of information that
manufacturers are already submitting to
the California Energy Commission.
Should the California Energy
Commission choose to streamline and
harmonize its reporting requirements by
giving manufacturers the option to
report California-required data through
DOE’s CCMS, use of CCMS would
reduce duplicative reporting between
the California and DOE requirements.
DOE is considering collecting the total
number of grid-enabled water heaters
shipped annually by manufacturers of
grid-enabled water heaters in order to
comply with the requirements of The
Energy Efficiency Improvement Act. (42
U.S.C. 6295(e)(6)(C)(i))
(5) Annual Estimated Number of
Respondents: 2,000;
(6) Annual Estimated Number of
Total Responses: 20,000;
(7) Annual Estimated Number of
Burden Hours: 755,000 (35 hours per
certification, including the time for
reviewing instructions, searching
existing data sources, gathering and
maintaining the data needed, and
completing and reviewing the collection
of information; 16 additional hours for
creating supplement testing instructions
for commercial HVAC, water heating,
and refrigeration equipment
manufacturers; 160 hours for test
procedure waiver preparation; 160
hours for representation extension
request preparation; 1 hour for creating
and applying a label for walk-in cooler
and freezer, commercial and industrial
pump, and electric motor
manufacturers);
(8) Annual Estimated Reporting and
Recordkeeping Cost Burden:
$77,500,000.
Statutory Authority
Section 326(d) of the Energy Policy
and Conservation Act, Public Law 94–
163, as amended (42 U.S.C. 6296); 10
CFR parts 429, 430, and 431.
Signing Authority
This document of the Department of
Energy was signed on November 18,
2020, by Alexander N. Fitzsimmons,
Deputy Assistant Secretary for Energy
Efficiency, Energy Efficiency and
Renewable Energy, pursuant to
delegated authority from the Secretary
of Energy. That document with the
original signature and date is
maintained by DOE. For administrative
purposes only, and in compliance with
requirements of the Office of the Federal

PO 00000

Frm 00053

Fmt 4703

Sfmt 4703

Register, the undersigned DOE Federal
Register Liaison Officer has been
authorized to sign and submit the
document in electronic format for
publication, as an official document of
the Department of Energy. This
administrative process in no way alters
the legal effect of this document upon
publication in the Federal Register.
Signed in Washington, DC, on November
18, 2020.
Treena V. Garrett,
Federal Register Liaison Officer, U.S.
Department of Energy.
[FR Doc. 2020–25845 Filed 11–20–20; 8:45 am]
BILLING CODE 6450–01–P

DEPARTMENT OF ENERGY
Federal Energy Regulatory
Commission
Combined Notice of Filings
Take notice that the Commission has
received the following Natural Gas
Pipeline Rate and Refund Report filings:
Docket Numbers: RP11–1591–000.
Applicants: Golden Pass Pipeline
LLC.
Description: Report Filing: 2020
Penalty Revenue and Costs Report of
Golden Pass Pipeline LLC.
Filed Date: 11/16/20.
Accession Number: 20201116–5003.
Comments Due: 5 p.m. ET 11/30/20.
Docket Numbers: RP21–215–000.
Applicants: Equitrans, L.P.
Description: § 4(d) Rate Filing:
Negotiated Rate Agreement—Triad
Hunter Assignment to SWN—12/1/2020
to be effective 12/1/2020.
Filed Date: 11/16/20.
Accession Number: 20201116–5015.
Comments Due: 5 p.m. ET 11/30/20.
Docket Numbers: RP21–217–000.
Applicants: Rockies Express Pipeline
LLC.
Description: § 4(d) Rate Filing: REX
2020–11–16 GT&C Section 3 Revisions
to be effective 12/16/2020.
Filed Date: 11/16/20.
Accession Number: 20201116–5059.
Comments Due: 5 p.m. ET 11/30/20.
Docket Numbers: RP21–218–000.
Applicants: Algonquin Gas
Transmission, LLC.
Description: § 4(d) Rate Filing:
Negotiated Rate—Yankee Gas 510802
Release eff 11–17–2020 to be effective
11/17/2020.
Filed Date: 11/16/20.
Accession Number: 20201116–5076.
Comments Due: 5 p.m. ET 11/30/20.
Docket Numbers: RP21–219–000.
Applicants: Northern Border Pipeline
Company.

E:\FR\FM\23NON1.SGM

23NON1