Paycheck Protection Loan Program Borrower Information Form and Lender's Application for Loan Guaranty

Paycheck Protection Program

Loan Forgiveness Application Form 3508 Revised July 30, 2021

OMB Control No.: 3245-0407
ExpirationDate: XX/XX/XXXX

LOAN FORGIVENESS APPLICATION FORM 3508 INSTRUCTIONS FOR BORROWERS
To apply for forgiveness of your First or Second Draw Paycheck Protection Program (PPP) loan, you (the Borrower) may use the
Form 3508EZ or the Form 3508S application or complete this application as directed in these instructions, and submit it to your
Lender (or the Lender that is servicing your loan). Borrowers may also complete their application electronically through their
Lender. Each PPP loan must use a separate loan forgiveness application form. You cannot use one form to apply for forgiveness
of both a First Draw PPP Loan and a Second Draw PPP loan. For a Second Draw PPP Loan in excess of $150,000, you must
submit a loan forgiveness application for your First Draw PPP Loan before or simultaneously with the loan forgiveness application
for your Second Draw PPP Loan, even if the calculated amount of forgiveness on your First Draw PPP Loan is zero.
If this application is being submitted for a First Draw PPP Loan approved on or before August 8, 2020 and the Borrower is
required to submit an SBA Form 3508D disclosure of a controlling interest, that disclosure must be submitted to the lender not
later than 30 days after submission of this loan forgiveness application. See subsection B.16 of SBA’s interim final rule posted on
January 6, 2021 (86 FR 3692).
This application has the following components: (1) the PPP Loan Forgiveness Calculation Form; (2) PPP Schedule A; (3) the PPP
Schedule A Worksheet; and (4) the (optional) PPP Borrower Demographic Information Form. All Borrowers must submit (1) and
(2) to their Lender.
Instructions for PPP Loan Forgiveness Calculation Form
Business Legal Name (“Borrower”)/DBA or Tradename (if applicable)/Business TIN (EIN, SSN, ITIN): Enter the same
information as on your Borrower Application Form (SBA Form 2483, SBA Form 2483-SD, SBA Form 2483-C, SBA Form 2483SD-C, or lender’s equivalent).
Business Address/NAICS Code/Business Phone/Primary Contact/E-mail Address: Enter the same information as on your
Borrower Application Form, unless there has been a change in address or contact information. If NAICS Code was not on the
Borrower Application Form, match the business activity code provided on IRS income tax filings, if applicable.
First Draw PPP Loan or Second Draw PPP Loan: Select the box that describes the PPP loan that this forgiveness application is
for. If you only have one PPP loan, select First Draw PPP Loan.
SBA PPP Loan Number: Enter the loan number assigned by SBA at the time of loan approval. Request this number from the
Lender if necessary.
Lender PPP Loan Number: Enter the loan number assigned to the PPP loan by the Lender.
PPP Loan Amount: Enter the original disbursed principal amount of the PPP loan (the original loan amount you received from
the Lender).
PPP Loan Disbursement Date: Enter the date that you received the PPP loan proceeds from the Lender. If loan proceeds were
received on more than one date, enter the first date on which you received PPP loan proceeds. If you received an authorized
increase on your First Draw PPP Loan after December 27, 2020, you must enter the date on which you received the original
disbursement of your PPP loan proceeds.
Amount of PPP Loan Increase: Enter the disbursed amount of an authorized increase on your First Draw PPP Loan received
after December 27, 2020 (if applicable).
Date of PPP Loan Increase: Enter the date that you received the proceeds of the authorized increase on your First Draw PPP
Loan from the Lender (if applicable).
Employees at Time of Loan Application: Enter the total number of employees (including owners/partners) at the time of the PPP
loan application.
Employees at Time of Forgiveness Application: Enter the total number of employees (including owners/partners) at the time the
Borrower is applying for loan forgiveness.
Covered Period: The Covered Period begins on the date the loan was originally disbursed. It ends on a date selected by the
Borrower that is at least 8 weeks following the date of loan disbursement and not more than 24 weeks after the date of loan
disbursement. For example, if the Borrower received their PPP loan proceeds on Monday, April 20, 2020, the first day of the
Covered Period is Monday, April 20, 2020 and the final day of the Covered Period is any date selected by the Borrower between
SBA Form 3508 (07/21)
Page 1

Paycheck Protection Program

Loan Forgiveness Application Form 3508 Revised July 30, 2021

OMB Control No.: 3245-0407
ExpirationDate: XX/XX/XXXX

Sunday, June 14, 2020 and Sunday, October 4, 2020.
Forgiveness Amount Calculation (see Summary of Costs Eligible for Forgiveness below):
Line 1: Enter total eligible payroll costs incurred or paid during the Covered Period. To calculate these costs, complete PPP
Schedule A. Enter the amount from PPP Schedule A, line 10.
Line 2: Enter the amount of business mortgage interest payments paid or incurred during the Covered Period for any business
mortgage obligation on real or personal property incurred before February 15, 2020. Do not include prepayments.
Line 3: Enter the amount of business rent or lease payments paid or incurred for real or personal property during the Covered
Period, pursuant to lease agreements in force before February 15, 2020.
Line 4: Enter the amount of business utility payments paid or incurred during the Covered Period, for business utilities for which
service began before February 15, 2020.
Line 5: Enter the amount of covered operations expenditures paid or incurred during the Covered Period.
Line 6: Enter the amount of covered property damage costs paid or incurred during the Covered Period.
Line 7: Enter the amount of covered supplier costs paid or incurred during the Covered Period pursuant to a contract, order, or
purchase order in effect prior to the beginning of the Covered Period (for perishable goods, the contract, order, or purchase order
must have been in effect before or at any time during the Covered Period).
Line 8: Enter the amount of covered worker protection expenditures paid or incurred during the Covered Period.
NOTE: For lines 2-8, you are not required to report payments that you do not want to include in the forgiveness amount.
Line 9: Enter the number from PPP Schedule A, line 3. This amount reflects the loan forgiveness reduction required for
salary/hourly wage reductions in excess of 25% for certain employees as described in PPP Schedule A.
Line 10: Add lines 1 through 8, subtract line 9, enter the total. If this amount is less than zero, enter a zero.
Line 11: Enter the number from PPP Schedule A, line 13.
Line 12: Enter the amount on line 10 multiplied by the amount on line 11. This calculation incorporates the loan forgiveness
reduction required for any full-time equivalency (FTE) employee reductions as described in PPP Schedule A.
Line 13: Enter the PPP Loan Amount.
Line 14: Divide the amount on line 1 by 0.60, and enter the amount. This determines whether at least 60% of the potential
forgiveness amount was used for payroll costs.
Line 15: Enter the smallest of lines 12, 13, or 14.
Summary of Costs Eligible for Forgiveness:
Borrowers are eligible for loan forgiveness for the following costs:
1. Eligible payroll costs. Borrowers are generally eligible for forgiveness for the payroll costs paid and payroll costs incurred
during the Covered Period (“payroll costs”). Payroll costs are considered paid on the day that paychecks are distributed or
the Borrower originates an ACH credit transaction. Payroll costs are considered incurred on the day that the employee’s
pay is earned. Payroll costs incurred but not paid during the Borrower’s last pay period of the Covered Period are eligible
for forgiveness if paid on or before the next regular payroll date. Otherwise, payroll costs must be paid during the Covered
Period. For each individual employee, the total amount of cash compensation eligible for forgiveness may not exceed an
annual salary of $100,000, as prorated for the Covered Period. Count payroll costs that were both paid and incurred only
once. Include only payroll costs for employees whose principal place of residence is in the United States. For information
on what qualifies as payroll costs, see SBA’s interim final rule posted on January 6, 2021 (86 FR 3692), as amended by
SBA’s interim final rule posted on March 18, 2021 (86 FR 15083). For information on what qualifies as payroll costs for a
Borrower that applied for the loan using SBA Form 2483-C or 2483-SD-C, see SBA’s interim final rule on loan amount
calculation and eligibility posted on March 3, 2021 (86 FR 13149), as amended by SBA’s interim final rule posted on
March 18, 2021 (86 FR 15083).
SBA Form 3508 (07/21)
Page 2

Paycheck Protection Program

Loan Forgiveness Application Form 3508 Revised July 30, 2021
2.

OMB Control No.: 3245-0407
ExpirationDate: XX/XX/XXXX

Eligible nonpayroll costs. Nonpayroll costs eligible for forgiveness consist of:
(a) covered mortgage obligations: payments of mortgage interest (not including any prepayment or payment of principal)
on any business mortgage obligation on real or personal property incurred before February 15, 2020 (“business mortgage
interest payments”);
(b) covered rent obligations: business rent or lease payments pursuant to lease agreements for real or personal property in
force before February 15, 2020 (“business rent or lease payments”);
(c) covered utility payments: business payments for a service for the distribution of electricity, gas, water, telephone,
transportation, or internet access for which service began before February 15, 2020 (“business utility payments”);
(d) covered operations expenditures: payments for any business software or cloud computing service that facilitates
business operations, product or service delivery, the processing, payment, or tracking of payroll expenses, human
resources, sales and billing functions, or accounting of tracking of supplies, inventory, records, and expenses;
(e) covered property damage costs: costs related to property damage and vandalism or looting due to public disturbances
that occurred during 2020 that were not covered by insurance or other compensation;
(f) covered supplier costs: expenditures made to a supplier of goods for the supply of goods that are essential to the
operations of the Borrower at the time at which the expenditure is made, and made pursuant to a contract, order, or
purchase order in effect prior to the beginning of the Covered Period (for perishable goods, the contract, order, or
purchase order may have been in effect before or at any time during the Covered Period); and
(g) covered worker protection expenditures: operating or capital expenditures that facilitate the adaptation of the business
activities of an entity to comply with the requirements established or guidance issued by the Department of Health and
Human Services, the Centers for Disease Control, or the Occupational Safety and Health Administration, or any
equivalent requirements established or guidance issued by a State or local government, during the period starting March 1,
2020 and ending on the date on which the national emergency declared by the President with respect to the Coronavirus
Disease 2019 (COVID-19) expires related to maintenance standards for sanitation, social distancing, or any other worker
or customer safety requirement related to COVID-19, but does not include residential real property or intangible property.
Eligible nonpayroll costs cannot exceed 40% of the total forgiveness amount. An eligible nonpayroll cost must be paid
either during the Covered Period or incurred during the Covered Period and paid on or before the next regular billing date,
even if the billing date is after the Covered Period. Count nonpayroll costs that were both paid and incurred only once.

The amount of loan forgiveness the Borrower applies for may be subject to reductions as explained in PPP Schedule A.

SBA Form 3508 (07/21)
Page 3

Paycheck Protection Program

Loan Forgiveness Application Form 3508 Revised July 30, 2021

OMB Control No.: 3245-0407
ExpirationDate: XX/XX/XXXX

Instructions for PPP Schedule A
Lines 1 through 5: Enter the amounts from PPP Schedule A Worksheet Tables as directed.
Enter the amount from line 3 of PPP Schedule A on line 9 of the PPP Loan Forgiveness Application Form.
For lines 6 through 9, during the Covered Period:
Line 6: Enter the total amount paid by the Borrower for employer contributions for employee group health, life, disability,
vision, or dental insurance, including employer contributions to a self-insured, employer-sponsored group health plan, but
excluding any pre-tax or after-tax contributions by employees. Do not add contributions for these benefits made on behalf
of a self-employed individual, general partners, or owner-employees of an S-corporation, because such payments are
already included in their compensation. Additionally, do not add premiums for COBRA continuation coverage taken into
account in determining the credit under section 6432 of the Internal Revenue Code of 1986.
Line 7: Enter the total amount paid by the Borrower for employer contributions to employee retirement plans, excluding
any pre-tax or after-tax contributions by employees. Do not add employer retirement contributions made on behalf of a selfemployed individual or general partners, because such payments are already included in their compensation.
Line 8: Enter the total amount paid by the Borrower for employer state and local taxes assessed on employee compensation
(e.g., state unemployment insurance tax); do not list any taxes withheld from employee earnings.
Line 9: Enter any amounts the Borrower paid to owners (owner-employees (with an ownership stake of 5% or more), a selfemployed individual, or general partners). For each individual owner in total across all businesses, this amount is capped at
(a) $20,833 (the 2.5-month equivalent of $100,000 per year), or (b) the 2.5-month equivalent of the individual’s applicable
compensation in the year that was used to calculate the loan amount (2019 or 2020), whichever is lower. If Borrower
applied for the loan using SBA Form 2483-C or 2483-SD-C, owner compensation includes proprietor expenses (business
expenses plus owner compensation). Proprietor expenses equal the difference between the Borrower’s gross income and
employee payroll costs. The Borrower’s proprietor expenses are capped at (a) $20,833 (the 2.5-month equivalent of
$100,000 per year), or (b) the 2.5-month equivalent of the borrower’s gross income in the year that was used to calculate the
loan amount (2019 or 2020), whichever is lower.
Line 10: Add lines 1, 4, 6, 7, 8, and 9. Enter this amount on line 1 on the PPP Loan Forgiveness Calculation Form.
Line 11: Enter the Borrower’s total average weekly full-time equivalency (FTE) during the chosen reference period. For purposes
of this calculation, the reference period is, at the Borrower’s election, either (i) February 15, 2019 to June 30, 2019; (ii) January 1,
2020 to February 29, 2020; or (iii) in the case of seasonal employers, either of the preceding periods or any consecutive 12-week
period between February 15, 2019 and February 15, 2020. For each employee, follow the same method that was used to calculate
Average FTE on the PPP Schedule A Worksheet. Sum across all employees during the reference period and enter that total on this
line.
The calculations on lines 11, 12, and 13 will be used to determine whether the Borrower’s loan forgiveness amount must be reduced
based on reductions in full-time equivalent employees, as required by the statute. Specifically, the actual loan forgiveness amount
that the Borrower will receive may be reduced if the Borrower’s average weekly FTE employees during the Covered Period was
less than during the Borrower’s chosen reference period. The Borrower is exempt from such a reduction, and should skip lines 11
and 12, if any of the three criteria listed on PPP Schedule A under Full-Time Equivalency (FTE) Reduction Calculation has been
met.
Line 12: Add lines 2 and 5.
Line 13: Divide line 12 by line 11 (or enter 1.0 if any of the three criteria listed on PPP Schedule A under Full-Time Equivalency
(FTE) Reduction Calculation has been met). If more than 1.0, enter 1.0. Enter this amount on line 11 of the Loan Forgiveness
Calculation Form.

SBA Form 3508 (07/21)
Page 4

Paycheck Protection Program

Loan Forgiveness Application Form 3508 Revised July 30, 2021

OMB Control No.: 3245-0407
ExpirationDate: XX/XX/XXXX

Instructions for PPP Schedule A Worksheet
Complete the PPP Schedule A Worksheet or obtain an equivalent report from the Borrower’s payroll system or payroll processor.
Table Instructions
Employee’s Name: Separately list each employee. Do not include any independent contractors, owner-employees (with an
ownership stake of 5% or more), self-employed individuals, or partners. Include only payroll costs for employees whose principal
place of residence is in the United States.
Employee Identifier: Enter the last four digits of each employee’s Social Security Number.
Cash Compensation: Enter the sum of gross salary, gross wages, gross tips, gross commissions, paid leave (vacation, family,
medical or sick leave, not including leave covered by the Families First Coronavirus Response Act), and allowances for dismissal or
separation paid or incurred during the Covered Period. Do not include qualified wages taken into account in determining (a) the
Employee Retention Credit under section 2301 of the CARES Act, as amended by sections 206 and 207 of the Taxpayer Certainty
and Disaster Tax Relief Act of 2020; (b) the Employee Retention Credit under section 3134 of the Internal Revenue Code of 1986, as
enacted by the American Rescue Plan Act of 2021; and (c) the disaster credit under section 303 of the Taxpayer Certainty and
Disaster Tax Relief Act of 2020. For each individual employee, the total amount of cash compensation eligible for forgiveness may
not exceed an annual salary of $100,000, as prorated for the Covered Period. For example, for an 8-week Covered Period, the
maximum is $15,385, for a 24-week Covered Period, the maximum is $46,154.
Average FTE: This calculates the average full-time equivalency (FTE) during the Covered Period. For each employee, enter the
average number of hours paid per week, divide by 40, and round the total to the nearest tenth. The maximum for each employee is
capped at 1.0. A simplified method that assigns a 1.0 for employees who work 40 hours or more per week and 0.5 for employees
who work fewer hours may be used at the election of the Borrower.
This calculation will be used to determine whether the Borrower’s loan forgiveness amount must be reduced due to a statutory
requirement concerning reductions in full-time equivalent employees. Borrowers are eligible for loan forgiveness for certain
expenditures during the Covered Period. However, the actual loan forgiveness amount that the Borrower will receive may be less,
depending on whether the Borrower’s average weekly number of FTE employees during the Covered Period was less than during the
Borrower’s chosen reference period (see Instructions to PPP Schedule A, Line 11). The Borrower is exempt from such a reduction if
either of the FTE Reduction Safe Harbors applies. See the FTE Reduction Safe Harbor instructions below.
Salary/Hourly Wage Reduction: This calculation will be used to determine whether the Borrower’s loan forgiveness amount must
be reduced due to a statutory requirement concerning reductions in employee salary and wages. Borrowers are eligible for loan
forgiveness for certain expenditures during the Covered Period. However, the actual amount of loan forgiveness the Borrower will
receive may be less, depending on whether the salary or hourly wages of certain employees during the Covered Period was less than
during the most recent full quarter before the Covered Period. If the Borrower restored salary/hourly wage levels, the Borrower may
be eligible for elimination of the Salary/Hourly Wage Reduction amount. Borrowers must complete this worksheet to determine
whether to reduce the amount of loan forgiveness for which they are eligible. Complete the Salary/Hour Wage Reduction column
only for employees whose salaries or hourly wages were reduced by more than 25% during the Covered Period as compared to the
most recent full quarter before the Covered Period. For each employee listed in Table 1, complete the following (using salary for
salaried employees and hourly wage for hourly employees):
Step 1. Determine if pay was reduced more than 25%.
a. Enter average annual salary or hourly wage during Covered Period:
.
b. Enter average annual salary or hourly wage during the most recent full quarter before the Covered Period: .
c. Divide the value entered in 1.a. by 1.b.:
.
If 1.c. is 0.75 or more, enter zero in the column above box 3 for that employee; otherwise proceed to Step 2.
Step 2. Determine if the Salary/Hourly Wage Reduction Safe Harbor is met.
a. Enter the annual salary or hourly wage as of February 15, 2020:
.
b. Enter the average annual salary or hourly wage between February 15, 2020 and April 26, 2020:
.
If 2.b. is equal to or greater than 2.a., skip to Step 3. Otherwise, proceed to 2.c.
c. Enter the average annual salary or hourly wage as of (a) for a PPP loan made before December 27, 2020,
December 31, 2020 or (b) for a PPP loan made after December 27, 2020, the last day of the Covered Period:
_________________.
If 2.c. is equal to or greater than 2.a., the Salary/Hourly Wage Reduction Safe Harbor has been met – enter
zero in the column above box 3 for that employee. Otherwise proceed to Step 3.

SBA Form 3508 (07/21)
Page 5

Paycheck Protection Program

Loan Forgiveness Application Form 3508 Revised July 30, 2021

OMB Control No.: 3245-0407
ExpirationDate: XX/XX/XXXX

Step 3. Determine the Salary/Hourly Wage Reduction.
a. Multiply the amount entered in 1.b. by 0.75:
.
b. Subtract the amount entered in 1.a. from 3.a.:
.
If the employee is an hourly worker, compute the total dollar amount of the reduction that exceeds 25% as follows:
c. Enter the average number of hours worked per week during the most recent full quarter before the Covered
Period:
.
d. Multiply the amount entered in 3.b. by the amount entered in 3.c.
. Multiply this amount by
the number of weeks in the Covered Period (a whole number between 8 and 24):_______________. Enter this
value in the column above box 3 for that employee.
If the employee is a salaried worker, compute the total dollar amount of the reduction that exceeds 25% as follows:
e. Multiply the amount entered in 3.b. by the number of weeks in the Covered Period:
.
Divide this amount by 52:
. Enter this value in the column above box 3 for
that employee.
FTE Reduction Exceptions: Indicate the FTE of (1) any positions for which the Borrower made a good-faith, written offer to rehire
an individual who was an employee on February 15, 2020 and the Borrower was unable to hire similarly qualified employees for
unfilled positions on or before (a) December 31, 2020, for a PPP loan made before December 27, 2020 or (b) the last day of the
Covered Period, for a PPP loan made after December 27, 2020; (2) any positions for which the Borrower made a good-faith, written
offer to restore any reduction in hours, at the same salary or wages, during the Covered Period and the employee rejected the offer,
and (3) any employees who during the Covered Period (a) were fired for cause, (b) voluntarily resigned, or (c) voluntarily requested
and received a reduction of their hours. In all of these cases, include these FTEs on this line only if the position was not filled by a
new employee. Any FTE reductions in these cases do not reduce the Borrower’s loan forgiveness.
Boxes 1 through 5: Enter the sums of the amounts in each of the columns.
FTE Reduction Safe Harbors
Two separate safe harbors exempt certain borrowers from any loan forgiveness reduction based on a reduction in FTE employee
levels:
1.

The Borrower is exempt from the reduction in loan forgiveness based on a reduction in FTE employees described above if the
Borrower, in good faith, is able to document that it was unable to operate between February 15, 2020, and the end of the
Covered Period at the same level of business activity as before February 15, 2020, due to compliance with requirements
established or guidance issued between March 1, 2020 and December 31, 2020 (or, for a PPP loan made after December 27,
2020, requirements established or guidance issued between March 1, 2020 and the last day of the Covered Period), by the
Secretary of Health and Human Services, the Director of the Centers for Disease Control and Prevention, or the Occupational
Safety and Health Administration, related to the maintenance of standards for sanitation, social distancing, or any other worker
or customer safety requirement related to COVID-19.

2.

The Borrower is exempt from the reduction in loan forgiveness based on a reduction in FTE employees described above if both
of the following conditions are met: (a) the Borrower reduced its FTE employee levels in the period beginning February 15,
2020, and ending April 26, 2020; and (b) the Borrower then restored its FTE employee levels to its FTE employee levels in the
Borrower’s pay period that included February 15, 2020 by not later than (i) December 31, 2020, for a PPP loan made before
December 27, 2020, or (ii) the last day of the Covered Period, for a PPP loan made after December 27, 2020.

SBA Form 3508 (07/21)
Page 6

Paycheck Protection Program

Loan Forgiveness Application Form 3508 Revised July 30, 2021

OMB Control No.: 3245-0407
ExpirationDate: XX/XX/XXXX

Documents that Each Borrower Must Submit with its PPP Loan Forgiveness Application
PPP Loan Forgiveness Calculation Form
PPP Schedule A
Payroll: Documentation verifying the eligible cash compensation and non-cash benefit payments from the Covered Period consisting of
each of the following:
a. Bank account statements or third-party payroll service provider reports documenting the amount of cash compensation paid
to employees.
b. Tax forms (or equivalent third-party payroll service provider reports) for the periods that overlap with the Covered
Period:
i. Payroll tax filings reported, or that will be reported, to the IRS (typically, Form 941); and
ii. State quarterly business and individual employee wage reporting and unemployment insurance tax filings reported,
or that will be reported, to the relevant state.
c. Payment receipts, cancelled checks, or account statements documenting the amount of any employer contributions to
employee group health, life, disability, vision or dental insurance and retirement plans that the Borrower included in the
forgiveness amount (PPP Schedule A, lines (6) and (7)).
FTE: Documentation showing (at the election of the Borrower):
a. the average number of FTE employees on payroll per week employed by the Borrower between February 15, 2019 and
June 30, 2019;
b. the average number of FTE employees on payroll per week employed by the Borrower between January 1, 2020 and
February 29, 2020; or
c. in the case of a seasonal employer, the average number of FTE employees on payroll per week employed by the Borrower
between February 15, 2019 and June 30, 2019; between January 1, 2020 and February 29, 2020; or any consecutive 12-week
period between February 15, 2019 and February 15, 2020.
The selected time period must be the same time period selected for purposes of completing PPP Schedule A, line 11. Documents
may include payroll tax filings reported, or that will be reported, to the IRS (typically, Form 941) and state quarterly business and
individual employee wage reporting and unemployment insurance tax filings reported, or that will be reported, to the relevant state.
Documents submitted may cover periods longer than the specific time period.
Nonpayroll: For categories a-c, documentation verifying existence of the obligations/services prior to February 15, 2020 and, for
all categories, eligible payments from the Covered Period.
a. Business mortgage interest payments: Copy of lender amortization schedule and receipts or cancelled checks verifying
eligible payments from the Covered Period; or lender account statements from February 2020 and the months of the Covered
Period through one month after the end of the Covered Period verifying interest amounts and eligible payments.
b. Business rent or lease payments: Copy of current lease agreement and receipts or cancelled checks verifying eligible
payments from the Covered Period; or lessor account statements from February 2020 and from the Covered Period through
one month after the end of the Covered Period verifying eligible payments.
c. Business utility payments: Copy of invoices from February 2020 and those paid during the Covered Period and receipts,
cancelled checks, or account statements verifying those eligible payments.
d. Covered operations expenditures: Copy of invoices, orders, or purchase orders paid during the Covered Period and receipts,
cancelled checks, or account statements verifying those eligible payments.
e. Covered property damage costs: Copy of invoices, orders, or purchase orders paid during the Covered Period and receipts,
cancelled checks, or account statements verifying those eligible payments, and documentation that the costs were related to
property damage and vandalism or looting due to public disturbances that occurred during 2020 and such costs were not covered
by insurance or other compensation.
f. Covered supplier costs: Copy of contracts, orders, or purchase orders in effect at any time before the Covered Period (except for
perishable goods), copy of invoices, orders, or purchase orders paid during the Covered Period and receipts, cancelled checks,
or account statements verifying those eligible payments.
g. Covered worker protection expenditures: Copy of invoices, orders, or purchase orders paid during the Covered Period and
receipts, cancelled checks, or account statements verifying those eligible payments, and documentation that the expenditures
were used by the Borrower to comply with applicable COVID-19 guidance during the Covered Period.
Documents that Each Borrower Must Maintain but is Not Required to Submit
PPP Schedule A Worksheet or its equivalent and the following:
a. Documentation supporting the listing of each individual employee in PPP Schedule A Worksheet Table 1, including the
“Salary/Hourly Wage Reduction” calculation, if necessary.
b. Documentation supporting the listing of each individual employee in PPP Schedule A Worksheet Table 2; specifically, that
SBA Form 3508 (07/21)
Page 7

Paycheck Protection Program

Loan Forgiveness Application Form 3508 Revised July 30, 2021

c.

d.

e.

OMB Control No.: 3245-0407
ExpirationDate: XX/XX/XXXX

each listed employee received during any single pay period in 2019 compensation at an annualized rate of more than
$100,000.
Documentation regarding any employee job offers and refusals, refusals to accept restoration of reductions in hours,
firings for cause, voluntary resignations, written requests by any employee for reductions in work schedule, and any
inability to hire similarly qualified employees for unfilled positions on or before (i) December 31, 2020 for a PPP
loan made before December 27, 2020 or (ii) the last day of the Covered Period for a PPP loan made after December
27, 2020.
Documentation supporting the certification, if applicable, that the Borrower was unable to operate between February 15, 2020,
and the end of the Covered Period at the same level of business activity as before February 15, 2020 due to compliance with
requirements established or guidance issued between March 1, 2020 and December 31, 2020 (or, for a PPP loan made after
December 27, 2020, requirements established or guidance issued between March 1, 2020 and the last day of the Covered
Period) by the Secretary of Health and Human Services, the Director of the Centers for Disease Control and Prevention, or the
Occupational Safety and Health Administration, related to the maintenance of standards of sanitation, social distancing, or any
other work or customer safety requirement related to COVID-19. This documentation must include copies of the applicable
requirements for each borrower location and relevant borrower financial records.
Documentation supporting the PPP Schedule A Worksheet “FTE Reduction Safe Harbor 2.

All records relating to the Borrower’s PPP loan, including documentation submitted with its PPP loan application, documentation
supporting the Borrower’s certifications as to the necessity of the loan request and its eligibility for a PPP loan (including the
Borrower’s gross receipt reduction certification for a Second Draw PPP Loan, if applicable), documentation necessary to support the
Borrower’s loan forgiveness application, and documentation demonstrating the Borrower’s material compliance with PPP
requirements.
Records Retention Requirement: The Borrower must retain all such documentation in its files for six years after the date the loan
is forgiven or repaid in full, and permit authorized representatives of SBA, including representatives of its Office of Inspector
General, to access such files upon request. The Borrower must provide documentation independently to a lender to satisfy relevant
Federal, State, local or other statutory or regulatory requirements or in connection with an SBA loan review or audit.

SBA Form 3508 (07/21)
Page 8