Steel Surrebuttal

OMB Control Number: 0694-0141

Expiration Date: 3/31/2019

Surrebuttal to Rebuttal Filed Against Request for Exclusion from Remedies: Section 232 National Security Investigation of Steel Imports
Surrebuttal Requirements: Only individuals or organizations who submitted an objection to a product exclusion request and where that objection received a rebuttal may submit a surrebuttal. For a surrebuttal to be considered, the surrebuttal filer must provide the Exclusion Request Identification number, the Objection to the Exclusion
Request Identification number, and the Rebuttal to the Objection to the Exclusion Request Identification number. Surrebuttals must be submitted using this Excel-based document. Paper submissions will not be accepted. Please do not tamper with this Excel-based document, e.g., unprotect sheets, delete or add tabs, delete or add rows
or columns, override data validation, etc. or your submission may not be accepted. A separate surrebuttal Excel-based document must be submitted for each distinct rebuttal to an objection to the exclusion request. Surrebuttals will not be considered if the applicant: 1) does not sufficiently address the specified reporting requirements in
sections 1.a - 2.e of the Excel-based document; 2) fails to address whether the surrebuttal addresses a substitute or identical product, or 3) fails to indicate the basis for the surrebuttal.
Organizations electing to attach supporting documents must provide these documents in PDF format and it must not exceed ten pages. All information submitted in the surrebuttal is subject to public disclosure. If you are submitting confidential business information (CBI), please attach the public version of that document to the
surrebuttal, in accordance with the recent interim final rule. Please submit no more than five pages of supporting CBI documentation via email with the Exclusion Request Identification number in the subject heading and with the tracking number and name of the rebutting company in the body of the message.
Organizations should upload their completed surrebuttal Excel-based document pertaining to a rebuttal to an objection to an exclusion request and any supporting documents to www.regulations.gov under Docket Number BIS-2018-0006. This form and any attached supporting documents will be made available to the public on
Regulations.gov.
For questions related directly to completing this form, please contact BIS via email ([email protected]) or telephone (202-482-5642).

Surrebuttal Against Rebuttal Filed on an Objection to an Exclusion Request

Section
1.a
1.b
1.c
1.d

Regulations.Gov Exclusion Request Identification #, e.g., BIS-2018-0006-99999
Objection to Exclusion Request Identification #, e.g., BIS-2018-0006-99999
Rebuttal Identification #, e.g., BIS-2018-0006-99999
Does this surrebuttal address a substitute or an identical product?

1.e

Are you submitting confidential business information with this form?
(If yes, please email it to [email protected] and submit the public version along with this form. Confidential
business information related to this rebuttal will not be made available to the public on Regulations.gov)

2.a
2.b

Manufacturing Time
Quality

Case Information

The basis of your surrebuttal is for the following reason(s):

2.c

Available Quantity

2.d

Delivery Time

2.e

Other (limit: 100 characters)

Bases for Surrebuttal of Rebuttal Filings
MANUFACTURING TIME
Challenging the requestor's assertion that:

3
3.a
3.b
3.c
3.d
3.e

Please provide a brief explanation of your challenge to the product manufacturing time (limit: 1,000 characters)

The product is currently made in the U.S. or can be manufactured at U.S. facilities within approximately eight weeks.
The objector does not currently manufacture the identified steel product at U.S. facilities, but states the time period
within which they can do so.
The objector can currently manufacture an acceptable substitute product at U.S. facilities within approximately eight
weeks.
The objector does not currently manufacture an acceptable substitute product at U.S. facilities, but states the time period
within which they can produce an acceptable substitute steel product.
The objector can manufacture the steel product within the time frame stated in their objection filing.

QUALITY
Challenging the requestor's assertion that their product is interchangeable with respect to its:

4
4.a

Chemical composition

4.b

Dimensional specifications

4.c

Strength

4.d

Toughness

4.e

Ductility

4.f

Magnetic permeability

4.g

Surface finish

4.h

Coatings and composition

4.i

Other technical specifications (e.g., end-use requirements)

5

Cause for Surrebuttal to Rebuttal
Submission

AVAILABLE QUANTITY
Challenging the requestor's assertion that:

5.a

Domestic steel product is available in sufficient quantity.

5.b

The objector can supply the percentage of steel product stated in their objection filing.

5.c

U.S. manufacturers have the capability to manufacture the identified steel product.

Please provide a brief explanation of your challenge to the product manufacturing time (limit: 1,000 characters)

Please provide a brief explanation of your challenge to the product manufacturing time (limit: 1,000 characters)

5.d

6

The objector has sold or has attempted to sell the steel product described in the exclusion request.

DELIVERY TIME
Challenging the requestor's assertion that:

6.a

Domestic steel product is available for timely delivery from the time the purchase order is received until the product is
ready to ship.

6.b

Domestic steel product is available for timely delivery from manufacturing plant to loading dock.

Please provide a brief explanation of your challenge to the product manufacturing time (limit: 1,000 characters)

Instruction: This surrebuttal must be signed by an organization official specifically authorized to certify the document as being accurate and complete.
CERTIFICATION
The undersigned certifies that the information herein supplied in response to this questionnaire is complete and correct to the best of his/her knowledge. It is a criminal offense to willfully make a false statement or representation to any department or agency of the United States Government as to any
Company Name:
Name of Authorizing Official:
Title of Authorizing
Email of Authorizing Official:
Phone Number:
If the Point of Contact is different from the Authorizing Official provide point-of-contact information below.
Point-of-Contact Name:
Title
Phone
E-Mail Address:
Number
Paperwork Reduction Act Notice
Per the Paperwork Reduction Act of 1995, public reporting burden for this collection of information is estimated to average 4 hours per response, including the time to review instructions, search existing data sources, gather and maintain data needed, and complete and review the collection of information. Send comments regarding this burden
estimate or any other aspects of this collection of information, to 1401 Constitution Avenue, NW, HCHB 1093, Office of Technology Evaluation, Bureau of Industry and Security, U.S. Department of Commerce, Washington, DC 20230 attn: 0694-0139. Commerce may not collect this information, and you are not required to respond; unless this OMB
number is displayed.