Download:
pdf |
pdf§ 91.20–20
46 CFR Ch. I (10–1–09 Edition)
distress signals as required by applicable statutes and regulations.
(b) When equipment is installed
which is not required by applicable regulations in this subchapter, that equipment shall be inspected and tested as
required for such equipment by applicable regulations in subchapter H (Passenger Vessels) of this chapter. For example, fire-detecting systems shall be
inspected and tested as required by
subpart 71.20 of subchapter H (Passenger Vessels) of this chapter.
§ 91.25–5 Application for a Certificate
of Inspection.
You must submit a written application for an inspection for certification
to the cognizant Officer in Charge, Marine Inspection. To renew a Certificate
of Inspection, you must submit an application at least 30 days before the expiration of the tank vessel’s current
certificate. You must use Form CG–
3752, Application for Inspection of U.S.
Vessel, and submit it to the Officer in
Charge, Marine Inspection at, or nearest to, the port where the vessel is located. When renewing a Certificate of
Inspection, you must schedule an inspection for certification within the 3
months before the expiration date of
the current Certificate of Inspection.
[CGFR 65–50, 30 FR 16974, Dec. 30, 1965, as
amended by CGFR 68–32, 33 FR 5718, Apr. 12,
1968; CGFR 68–82, 33 FR 18901, Dec. 18, 1968;
CGD 71–161R, 37 FR 28262, Dec. 21, 1972; CGD
82–036, 48 FR 654, Jan. 6, 1983; CGD 79–032, 49
FR 25455, June 21, 1984; CGD 95–012, 60 FR
48051, Sept. 18, 1995]
§ 91.20–20 Specific tests and inspections.
The applicable tests and inspections
as set forth in subpart 91.25 of this part
shall be made at this time. In addition,
the following specific tests and inspections shall be made by the inspector.
(a) For inspection procedures of lifesaving appliances and arrangements,
see subchapter W (Lifesaving Appliances and Arrangements) of this chapter.
(b) Installation of carbon dioxide extinguishing piping—see § 95.15–15 of this
subchapter.
(c) For inspection procedures of marine engineering equipment and systems, see subchapter F (Marine Engineering) of this chapter.
(d) For inspection procedures of Electrical Engineering equipment and systems, see subchapter J (Electrical Engineering) of this chapter.
(e) For inspection and tests of tanks
containing certain dangerous cargoes
in bulk, see part 98 of this subchapter.
[USCG 1999–4976, 65 FR 6501, Feb. 9, 2000]
§ 91.25–10
The inspection for certification shall
include an inspection of the structure,
boilers, and other pressure vessels, machinery, and equipment. The inspection
shall be such as to insure that the vessel, as regards the structure, boilers
and other pressure vessels, and their
appurtenances, piping, main and auxiliary machinery, electrical installations, lifesaving appliances, fire-detecting and extinguishing equipment, pilot
boarding equipment, pollution prevention equipment, and other equipment,
is in satisfactory condition and fit for
the service for which it is intended, and
that it complies with the applicable
regulations for such vessel and determine that the vessel is in possession of
a valid certificate issued by the Federal Communications Commission, if
required. The lights, means of making
sound signals, and distress signals carried by the vessel shall also be subject
to the above mentioned inspection for
the purpose of ensuring that they comply with the requirements of the applicable statutes and regulations.
[CGFR 65–50, 30 FR 16974, Dec. 30, 1965, as
amended by CGD 84–069, 61 FR 25289, May 20,
1996]
Subpart 91.25—Inspection for
Certification
wreier-aviles on DSKGBLS3C1PROD with CFR
Scope of inspection.
[CGFR 65–50, 30 FR 16974, Dec. 30, 1965, as
amended by CGFR 68–32, 33 FR 5718, Apr. 12,
1968; CGFR 68–82, 33 FR 18901, Dec. 18, 1968;
CGD 71–161R, 37 FR 28262, Dec. 21, 1972; CGD
82–036, 48 FR 655, Jan. 6, 1983; CGD 79–032, 49
FR 25455, June 21, 1984; CGD 95–012, 60 FR
48051, Sept. 18, 1995]
§ 91.25–1 Prerequisite of reissuance of
certificate of inspection.
(a) An inspection for certification is
a prerequisite of the reissuance of a
certificate of inspection.
22
VerDate Nov<24>2008
10:57 Nov 16, 2009
Jkt 217194
PO 00000
Frm 00032
Fmt 8010
Sfmt 8010
Y:\SGML\217194.XXX
217194
| File Type | application/pdf |
| File Modified | 2014-09-18 |
| File Created | 2014-09-18 |