FDA-form-356h_R13_instructional-supplement_508_FINAL_CDERProposedEdits

General Licensing Provisions: Biologics License Application, Changes to an Approved Application, Labeling, Revocation and Suspension

FDA-form-356h_R13_instructional-supplement_508_FINAL_CDERProposedEdits

OMB: 0910-0338

Document [pdf]
Download: pdf | pdf
INSTRUCTIONS FOR FILLING OUT FORM FDA 356h – APPLICATION TO MARKET A NEW OR
ABBREVIATED NEW DRUG OR BIOLOGIC FOR HUMAN USE
(The field numbers below correspond to the numbered boxes on the Form FDA 356h)
NOTE: Please submit a new Form FDA 356h with each submission. Complete the pages of the form
sequentially using continuation pages as needed. If continuation pages are not needed, click on the
‘Remove Continuation Page’ button at top/bottom of form.

Field 1: DATE OF SUBMISSION
Enter the date the submission is being submitted to the FDA. The date entered should match the date of the
cover letter for the submission.
Fields 2–6: APPLICANT INFORMATION
This section should include the name, street address, applicant DUNS number, telephone and facsimile
numbers of the person or legal entity submitting the application. For biologic products, the name of applicant
in Field 2 is the name of the person or legal entity to whom the license will be issued. Enter the U.S. license
number, if previously issued, in the appropriate field. Enter the name, street address, applicant DUNS
number, US Agent DUNS and telephone number of the person or legal entity authorized to represent a nonU.S. applicant in Field 6.
Fields 7–15: PRODUCT DESCRIPTION
This section should include all the information necessary to identify the product that is the subject of this
application or submission.
Field 7: NDA, ANDA, OR BLA APPLICATION NUMBER
Provide the six-digit application number. For application numbers less than six-digits, the application number
should be preceded using zeros (i.e., for NDA 12345 enter 012345).
Field 8: SUPPLEMENT NUMBER
Provide the four-digit supplement number with preceding zeros for supplement numbers that are less than
four-digits (i.e., for Supplement 1 enter 0001).
Field 15A: PROPOSED INDICATION FOR USE
For original and efficacy supplemental applications only (including resubmissions to these application types),
provide the indication(s) proposed within the application. Indicate if the proposed indication is for a rare
disease (prevalence <200,000 U.S. patients). Indicate if the product proposed within the application (i.e. not
the reference listed drug for an ANDA) has an FDA Orphan Drug Designation and if so; provide the six-digit
Orphan Designation number. If the submission is not an original application or efficacy supplement, select
‘No’ in response to ‘Is this indication for a rare disease?’ Use the Continuation Page if there are more than
one proposed indications for use by adding one indication per entry and providing rare disease/Orphan Drug
Designation information for each entry, as applicable. If continuation pages are not needed, click on the
‘Remove Continuation Page’ button at top/bottom of form.
Field 15B: SNOMED CT INDICATION DISEASE TERM(S)
For each original and efficacy supplemental applications only (including resubmissions to these application
types), provide the SNOMED CT coded disease term (e.g., 38341003 | Hypertensive disorder, systemic
arterial (disorder) |) for the indication provided in Field 15A. To look up the indication’s SNOMED CT coded
disease term:
1.
2.
3.
4.

Navigate to http://browser.ihtsdotools.org/.
Under Local Extensions, select ‘Go Browsing United States edition’.
Select the ‘Search’ tab located in the upper left hand of page.
Enter the disease term in the search field.
(continued on next page)

FORM FDA 356h SUPPLEMENT (08/18) – FORM INSTRUCTIONS

Page 1 of 5

PSC Publishing Services (301) 443-6740 EF

5.
6.
7.
8.
9.
10.

Check the box ‘Group by concept’.
Select the single most appropriate term for the indication.
Select the ‘Expression’ tab located in the upper right hand of page.
Copy the entire text that appears under the heading ‘Pre-coordinated Expression.
Paste the copied SNOMED CT disease term into Field 15B of Form FDA 356h.
For additional indications, use the continuation page for #15 and repeat these steps.

Fields 16–31: APPLICATION INFORMATION
Fields 16–18: Identify the appropriate application type.
Field 19: 351(k) BASIS FOR SUBMISSION
If the application is a 351(k) BLA, provide the name of the biological reference product that is the basis for
the application and the holder of the licensed application.
Field 20: ANDA OR 505(b)(2) BASIS FOR SUBMISSION
If the application is a 505(b)(2) NDA, provide the name of the listed drug(s) that is/are the basis for the
application and the application number(s) for the listed drug(s). If you are submitting an ANDA, please
provide the name and application number for the reference listed drug (RLD). If the reference standard for
the ANDA (generally identified in the Orange Book) differs from the RLD, information about the reference
standard should not be provided on the 356h, but should be included elsewhere in the application (e.g.,
sections 1.12.11).
Field 21: SUBMISSION TYPE
For original applications, select ‘Original’. For all other submission types, select any of the submission
types listed that apply, or specify the type of submission under “Other” if otherwise not listed. See also 21
CFR 314.3(b).
Original: An application for which FDA has never issued an approval letter;
Labeling Supplement: A supplemental application for labeling changes to an approved product as
described under 21 CFR 314.70 and 21 CFR 601.12 that does not otherwise qualify as another type of
supplement (e.g., Efficacy, CMC, REMS);
CMC Supplement: A supplemental application for chemistry, manufacturing, and control (CMC)
changes to an approved product as described under 21 CFR 314.70, 21 CFR 314.71, 21 CFR 314.72,
and 21 CFR 601.12, including CMC supplements with corresponding labeling changes;
Efficacy Supplement: A supplemental application for changes to an approved product, including
but not limited to, a new indication, a new dosage regimen or route of administration, a comparative
efficacy claim naming another approved product, or a significant alteration in the patient population
(e.g., a switch of marketing status from prescription to over-the-counter), or labeling or manufacturing
changes requiring clinical data for approval;
Annual Report: See 21 CFR 314.81(b)(2) for NDAs and 21 CFR 601.12(d) for BLAs;
Product Correspondence: Any communication or general correspondence related to an application
(e.g., routine administrative changes, donor re-entry requests, lot distribution reports, license
reissuance requests, meeting requests) that is not an amendment to a pending application. Provide
a description of the content or intent of the Product Correspondence in Field 25 (Reasons for
the Submission);
REMS Supplement: A supplemental application proposing a new Risk Evaluation and Mitigation
strategy (REMS) or modifications (major and/or minor) to an approved REMS;
(continued on next page)
FORM FDA 356h SUPPLEMENT (08/18) – FORM INSTRUCTIONS

Page 2 of 5

Post Marketing Requirements or Commitments: A submission containing information related to post
marketing requirements or commitments (e.g., nonclinical protocol, final study report);
Periodic Safety Report: Periodic reports (Periodic Adverse Drug Experience Reports (PADERs))
of adverse drug or biological product experience as described under 21 CFR 314.80(c)(2), 21 CFR
314.98, and 21 CFR 600.80(c)(2), including those in Periodic Safety Update Report (PSUR) format;
Request for Proprietary Name Review: A submission containing a request for proprietary
name review;
Other (specify): State the submission type if it is not one of the previous submission types listed
above (e.g., formal dispute resolution request, REMS revisions, REMS assessment). If this box is
checked, provide the Reasons for the Submission in Field 27.
Field 22: SUBMISSION SUB-TYPE
Select one of the submission sub-types listed. See also 21 CFR 314.3(b).
Presubmission: Information submitted prior to the submission of a complete original application (e.g.,
submission of partial application (rolling submission);
Amendment: A submission to a pending original application, or pending supplemental application,
including responses to Information Request letters, Discipline Review letters, or other FDA
communications. Amendments also include submissions that contain additional supportive material
intended to augment or revise information previously submitted in a submission type listed under
Field 21 (e.g., amendment to an annual report);
Initial submission: A submission type under Field 21 that has never before been submitted (excluding
presubmissions);
Resubmission: A complete response to an action letter, or submission of an original application that
has been the subject of a withdrawal before FDA action or a refusal to file action.
Field 23: SUPPLEMENT CATEGORY
Select the appropriate type of supplemental application, if applicable.
CBE (Changes Being Effected): A supplemental application proposing certain changes for which
distribution of the product made using the change(s) can occur upon FDA receipt of the application as
described under 21 CFR 314.70(c)(6) and 21 CFR 601.12(c)(5);
CBE-30 (Changes Being Effected in 30 Days): A supplemental application proposing certain
changes requiring submission at least 30 days prior to distribution of the product made using the
change(s) as described under 21 CFR 314.70(c) and 21 CFR 601.12(c);
Prior Approval (PA): A supplemental application proposing a major change for which distribution of
the product made using the change(s) cannot occur prior to FDA approval as described under 21 CFR
314.70(b) and 21 CFR 601.12(b).
Field 24: COMBINATION PRODUCTS
Field 21 (Submission Type) should be filled out before attempting to fill out Field 24. Field 24 is only fillable
for original submissions and supplements (Labeling, CMC, Efficacy, REMS), including resubmissions and
amendments to these types. Indicate if the product proposed within the submission is a combination product
(e.g., drug-device, drug-biological product, drug-device-biological product, see 21 CFR 3.2(e)) by selecting
‘Yes’ and entering the number below that best identifies the type:
1: Convenience Kit or Co-Package
2: Prefilled Drug Delivery Device/System
3: Prefilled Biologic Delivery Device/System
FORM FDA 356h SUPPLEMENT (08/18) – FORM INSTRUCTIONS

(continued on next page)
Page 3 of 5

4:
5:
6:
7:
8:
9:

Device Coated/Impregnated/Otherwise Combined with Drug
Device Coated or Otherwise Combined with Biologic
Drug/Biologic Combination
Separate Products Requiring Cross Labeling
Possible Combination Based on Cross Labeling of Separate Products
Other Type of Part 3 Combination Product (e.g., Drug/Device/Biological Product)

If the product(s) in the submission is not a combination product, select ‘No’ and leave the Combination
Product Type blank. If the submission relates to a drug product available in both combination product (e.g.,
pre-filled syringe presentation) and non-combination product (e.g., vial presentation) configurations) select
‘Yes’ and identify the type that applies to the combination product configuration. If the submission relates
to a product configuration that has multiple combination product types (e.g., a submission is for a product
that contains a prefilled syringe (Type 2) and is co-packaged with other devices and drugs (Type 1)),
select type ‘9’.
If this is the initial submission for a product for which a Request for Designation (RFD) was submitted,
provide the six-digit RFD number.
Field 25:
If the submission identified in Field 21 of this form contains data only from pediatric studies, select ‘Yes’.
If the submission does not contain data from pediatric studies, or is an original application or efficacy
supplement that contains data from both adult and pediatric studies, select ‘No’.
If the submission contains Human Factors (HF) information, select ‘Yes’. HF information may include a study
protocol, results report, use- related risk analysis, or justification for no HF validation study.
Field 26: PROPOSED MARKETING STATUS
Select the appropriate Proposed Marketing Status.
Field 27: REASONS FOR SUBMISSION
This section should contain a brief explanation of the contents of, or rationale for, the submission (e.g.,
“manufacturing change from roller bottle to cell factory” or “response to Information Request Letter of mm/
dd/yy” or “pediatric exclusivity determination request” or “to fulfill a Subpart H postmarketing requirement”).
If you selected ‘Yes’ for human factors information, specify what type of HF information is being submitted
(e.g., HF protocol, HF study report, use-related risk analysis, justification for no HF validation study).
Field 28: ESTABLISHMENT INFORMATION
For original (initial) applications, efficacy supplements, CMC supplements, and resubmissions
to these submission types, this section should include complete information on the locations
of all manufacturing, packaging, and control sites for both drug substance and drug product.
Establishment information on bioequivalence testing sites, excipient testing sites, and container/
closure manufacturing and testing establishments is not required in Field 27. For presubmissions
and amendments to these submission types, complete establishment information should be provided in this
section when applicable (e.g., an amendment that describes changes to previously submitted establishment
information; an amendment that adds or removes an establishment; a presubmission that includes CMC
information including establishment information). For each site, please include the establishment name,
address, registration (FEI) number, Master File (MF; Drug Master File (DMF) or Biologic Master File (BMF))
number (for facilities used under a MF), and establishment DUNS number. Indicate whether or not the
establishment is new to the application, if applicable. New establishments will have by default a ‘pending’
status. If it is not a new establishment, indicate its current status (e.g., active, inactive, or withdrawn) in the
appropriate box. Also provide the name, address, phone number, fax number and email address for the
contact at the site. In the section “Manufacturing Steps, and/or Type of Testing”, provide a brief description
of the specific manufacturing steps and/or type of testing (e.g., final dosage form, stability testing) conducted
(continued on next page)
FORM FDA 356h SUPPLEMENT (08/18) – FORM INSTRUCTIONS

Page 4 of 5

at the site (i.e., describe the type(s) of assays or testing completed). Indicate whether the site is ready for
inspection, or if not, when it will be ready.
Use the Continuation Page as needed. If continuation pages are not needed, click on the ‘Remove
Continuation Page’ button at top/bottom of form.
Field 29: CROSS REFERENCES
This section should contain a list of all Biologics License Applications (BLAs), Investigational New Drug
Applications (INDs), New Drug Applications (NDAs), Premarket Approval Applications (PMAs), Premarket
Notifications (510(k)(s), Investigational Device Exemptions (IDEs), and/or DMFs/BMFs that are crossreferenced in the current application. Use the Continuation Page as needed. If continuation pages are not
needed, click on the ‘Remove Continuation Page’ button at top/bottom of form.
Field 30: This section contains items 1 through 20 which is a checklist that should be used to indicate
the types of information contained within a particular application or submission. Check all that apply. A
complete index or table of contents should immediately follow the Form FDA 356h and, if applicable, a User
Fee Cover Sheet (Forms FDA 3397, 3792, or 3794). Note that the CFR references are provided for most
items in order to indicate what type of information should or must be submitted in each section. For further
information, the applicant may consult the guidance documents that are available from the Agency. Please
note, selecting Field 30, item 15 indicates the complete Biological Products establishment description is
included at Field 28.
Fields 31–38: CERTIFICATION
Enter the name and title, telephone number, facsimile number, email address, and street address of the
applicant’s Responsible Official in Fields 31–36 of the form. This person is responsible for certifying
compliance with applicable laws and regulations. The authorized U.S. agent named in Field 6 of the form
may also act as the applicant’s Responsible Official. The form must be signed in Field 37 by the applicant,
or the applicant’s attorney, agent, or other authorized official. 21 CFR 601.2(a). If the person signing the
form in Field 37 does not reside or have a place of business within the United States, the form must be
countersigned in Field 38 by an attorney, agent, or other authorized official who resides or maintains a place
of business within the United States. 21 CFR 314.50(a)(5).

FORM FDA 356h SUPPLEMENT (08/18) – FORM INSTRUCTIONS

Page 5 of 5

PSC Publishing Services (301) 443-6740 EF


File Typeapplication/pdf
File TitleInstructions for Filling Out Form FDA 356h-Application to Market a New or Abbreviated New Drug or Biologic for Human Use
SubjectInstructions for Filling Out Form FDA 356h-Application to Market a New or Abbreviated New Drug or Biologic for Human Use
AuthorFDA
File Modified2022-08-25
File Created2018-08-06

© 2024 OMB.report | Privacy Policy