NESHAP for Group I Polymers and Resins (40 CFR part 63, subpart U) (Renewal)

ICR 202209-2060-020

OMB: 2060-0665

Federal Form Document

Forms and Documents
Document
Name
Status
Supplementary Document
2022-09-29
Supporting Statement A
2022-09-29
IC Document Collections
ICR Details
2060-0665 202209-2060-020
Received in OIRA 201805-2060-003
EPA/OAR 2410.05
NESHAP for Group I Polymers and Resins (40 CFR part 63, subpart U) (Renewal)
Extension without change of a currently approved collection   No
Regular 09/30/2022
  Requested Previously Approved
36 Months From Approved 11/30/2022
167 167
56,400 56,400
5,230,000 5,230,000

The National Emission Standards for Hazardous Air Pollutants (NESHAP) for the regulations published at 40 CFR Part 63, Subpart U were proposed on June 12, 1995, promulgated on September 5, 1996, and amended on June 19, 2000, July 16, 2001, December 16, 2008, and April 21, 2011. These regulations apply to existing and new elastomer product process units (EPPU) and associated equipment including waste management units, maintenance wastewater, heat exchange systems, and equipment required by or utilized to comply with this Subpart located at facilities that are major sources of hazardous air pollutants (HAPs) and are classified in the Group I Polymers and Resins source category. The Group I Polymers and Resins source category includes the following categories: Butyl Rubber Production, Epichlorohydrin Elastomers Production, Ethylene Propylene Rubber Production, Hypalon Production, Neoprene Production, Nitrile Butadiene Rubber (NBR) Production, Polybutadiene Rubber Production, Polysulfide Rubber Production, and Styrene Butadiene Rubber and Latex Production. New facilities include those that commenced construction, or reconstruction after the date of proposal. This ICR combines burden from the 2011 amendment with the burden associated with the existing provisions of the rule. In general, all NESHAP standards require initial notifications, performance tests, and periodic reports by the owners/operators of the affected facilities. They are also required to maintain records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility, or any period during which the monitoring system is inoperative. These notifications, reports, and records are essential in determining compliance, and are required of all affected facilities subject to NESHAP. Any owner/operator subject to the provisions of this part shall maintain a file containing these documents, and retain the file for at least five years following the generation date of such maintenance reports and records. All reports are sent to the delegated state or local authority. In the event that there is no such delegated authority, the reports are sent directly to the United States Environmental Protection Agency (EPA) regional office. This information is being collected to assure compliance with 40 CFR Part 63, Subpart U.

US Code: 42 USC 7401 et seq Name of Law: Clean Air Act
  
None

Not associated with rulemaking

  87 FR 20487 09/29/2022
87 FR 59076 09/29/2022
No

1
IC Title Form No. Form Name
NESHAP for Group I Polymers and Resins (40 CFR part 63, subpart U)

  Total Request Previously Approved Change Due to New Statute Change Due to Agency Discretion Change Due to Adjustment in Estimate Change Due to Potential Violation of the PRA
Annual Number of Responses 167 167 0 0 0 0
Annual Time Burden (Hours) 56,400 56,400 0 0 0 0
Annual Cost Burden (Dollars) 5,230,000 5,230,000 0 0 0 0
No
No

$25,900
No
    No
    No
No
No
No
No
Muntasir Ali 919 541-0833

  No

On behalf of this Federal agency, I certify that the collection of information encompassed by this request complies with 5 CFR 1320.9 and the related provisions of 5 CFR 1320.8(b)(3).
The following is a summary of the topics, regarding the proposed collection of information, that the certification covers:
 
 
 
 
 
 
 
    (i) Why the information is being collected;
    (ii) Use of information;
    (iii) Burden estimate;
    (iv) Nature of response (voluntary, required for a benefit, or mandatory);
    (v) Nature and extent of confidentiality; and
    (vi) Need to display currently valid OMB control number;
 
 
 
If you are unable to certify compliance with any of these provisions, identify the item by leaving the box unchecked and explain the reason in the Supporting Statement.
09/30/2022


© 2024 OMB.report | Privacy Policy