Download:
pdf |
pdf7/10/22, 1:57 PM
Longline/Pot Gear Catcher Processor eLogbook Instructions for eLandings - eLandings User Documentation - Confluence
eLandings User Docum… / eLandings User Manual / eLandings eLogbook Instructions
eLandings User Manual
Longline/Pot Gear Catcher Processor eLogbook Instructions for
eLandings
Created by Susan Hall - NOAA Federal (Unlicensed)
Last updated: Nov 11, 2019 by Claire Minelga - NOAA Affiliate • 5 min read
The eLogbook replaces the paper DCPL and is required for longline catcher/processor vessels named on an LLP license with a Pacific cod CP hookand-line endorsement for the BSAI who are directed fishing for Pacific cod in the BSAI and conducting groundfish CDQ fishing.
Register a New Logbook
Once you have logged into elandings you will need to select the operation that you want to register the logbook to.
Select your Operation
Click on the Register Logbook button.
On the Register Logbook page you will need to select the following:
Year
Weight Units
Depth Units
Click on the Register Logbook button.
https://elandings.atlassian.net/wiki/spaces/doc/pages/16482307/Longline+Pot+Gear+Catcher+Processor+eLogbook+Instructions+for+eLandings
1/14
7/10/22, 1:57 PM
Longline/Pot Gear Catcher Processor eLogbook Instructions for eLandings - eLandings User Documentation - Confluence
You will be returned to the Reports Menu page.
Select your Operation
Click on the Current Year Logbook button
Enter Initial Voyage Information
Before you can make any set entries in your logbook, you will need to do the following three things:
Add a New Voyage
Add Gear
Go Active
Click on the New Voyage button.
https://elandings.atlassian.net/wiki/spaces/doc/pages/16482307/Longline+Pot+Gear+Catcher+Processor+eLogbook+Instructions+for+eLandings
2/14
7/10/22, 1:57 PM
Longline/Pot Gear Catcher Processor eLogbook Instructions for eLandings - eLandings User Documentation - Confluence
The New Voyage page will appear, enter the following information:
Start Date: It should always be January 1st of the current year you will be fishing
Crew Size (even if it's only one or two)
Operator Name
Weight Units
Observer 1: if you are actively fishing on January 1st and have an observer on board, enter the applicable information here
Cruise Number
Observer 2: If you are actively fishing on January 1st and have a 2nd observer on board, enter the applicable information here
Cruise Number
Operator IFQ permit: enter if applicable to this Voyage
Click on the Save button
https://elandings.atlassian.net/wiki/spaces/doc/pages/16482307/Longline+Pot+Gear+Catcher+Processor+eLogbook+Instructions+for+eLandings
3/14
7/10/22, 1:57 PM
Longline/Pot Gear Catcher Processor eLogbook Instructions for eLandings - eLandings User Documentation - Confluence
Once you have entered the New Voyage information and saved it, you will be returned to the eLogbook page
Click on the Add Gear button.
On the Gear Entry page enter the following applicable information:
Gear Code: 61 (hook and line) or 91 (pot gear)
Description: ONLY FOR POT GEAR
Gear Type: conventional fixed hook, tub fixed hook, autoline, or snap
https://elandings.atlassian.net/wiki/spaces/doc/pages/16482307/Longline+Pot+Gear+Catcher+Processor+eLogbook+Instructions+for+eLandings
4/14
7/10/22, 1:57 PM
yp
Longline/Pot Gear Catcher Processor eLogbook Instructions for eLandings - eLandings User Documentation - Confluence
p
Length of Skate
Hook Size: if you have multiple hook sizes, that can now be accounted for using the % fields
Hook Spacing
Hooks per Skate
Percent with Swivels
Swivels on hooks
Swivels on snaps
Click Save
If you have more than one gear type, you can add them one after another if you click on the Save and Continue button after each entry.
Go Active
You will be returned to the eLogbook page
Click on the Go Active button if you are actually engaged in fishing activity at this time.
Enter your Go Active date (cannot be in the future)
If you are not actively fishing when you register your logbook, you can ignore this step until you do actually Go Active.
https://elandings.atlassian.net/wiki/spaces/doc/pages/16482307/Longline+Pot+Gear+Catcher+Processor+eLogbook+Instructions+for+eLandings
5/14
7/10/22, 1:57 PM
Longline/Pot Gear Catcher Processor eLogbook Instructions for eLandings - eLandings User Documentation - Confluence
If you are not actually engaged in fishing activity yet, you will need to Go Inactive until you actually begin a fishing trip.
Click on the date (01/01/2017) in blue text in the first column
Click on the Go Inactive button
https://elandings.atlassian.net/wiki/spaces/doc/pages/16482307/Longline+Pot+Gear+Catcher+Processor+eLogbook+Instructions+for+eLandings
6/14
7/10/22, 1:57 PM
Longline/Pot Gear Catcher Processor eLogbook Instructions for eLandings - eLandings User Documentation - Confluence
A page will appear requiring a reason for going inactive. Enter the appropriate comment and click on the Save button.
You should create a New Voyage when you decide to Go Active again.
eLogbook Set Entries
https://elandings.atlassian.net/wiki/spaces/doc/pages/16482307/Longline+Pot+Gear+Catcher+Processor+eLogbook+Instructions+for+eLandings
7/14
7/10/22, 1:57 PM
Longline/Pot Gear Catcher Processor eLogbook Instructions for eLandings - eLandings User Documentation - Confluence
You will be taken to the page shown below where you will need to click on the Add Set button to begin making your entries.
Set Deploy
Enter the following information:
https://elandings.atlassian.net/wiki/spaces/doc/pages/16482307/Longline+Pot+Gear+Catcher+Processor+eLogbook+Instructions+for+eLandings
8/14
7/10/22, 1:57 PM
Longline/Pot Gear Catcher Processor eLogbook Instructions for eLandings - eLandings User Documentation - Confluence
The Set Number will auto-fill for you but can be modified as needed
Gear Type can be selected from the drop down menu if you have more than one type
Management Program (no need to enter management Program ID unless fishing under a CDQ program)
Time set (needs to be in military format)
Begin and End Depths
Begin Latitude and Begin Longitude (there are multiple ways to enter lat/long, see table at the end of this section)
Begin/End Buoy numbers - this is an Optional field
End Latitude and End Longitude (there are multiple ways to enter lat/long, see table at the end of this section)
Bird Avoidance Gear select the appropriate one from the drop down menu
Federal Reporting Area
Target Species - more than one can be entered as applicable
Number of Skates or Pots Set
Click on Save when you're done.
You will be taken back to the eLogbook Entries page as shown below.
https://elandings.atlassian.net/wiki/spaces/doc/pages/16482307/Longline+Pot+Gear+Catcher+Processor+eLogbook+Instructions+for+eLandings
9/14
7/10/22, 1:57 PM
Longline/Pot Gear Catcher Processor eLogbook Instructions for eLandings - eLandings User Documentation - Confluence
Click on Set 1 in blue text to return to the Set Deploy screen. Click on the Add Retrieval button.
https://elandings.atlassian.net/wiki/spaces/doc/pages/16482307/Longline+Pot+Gear+Catcher+Processor+eLogbook+Instructions+for+eLandings
10/14
7/10/22, 1:57 PM
Longline/Pot Gear Catcher Processor eLogbook Instructions for eLandings - eLandings User Documentation - Confluence
Set Retrieval Entry
Enter the Time Hauled
Enter the Hail Weight Longline/Pot Gear Catcher Processor eLogbook Instructions for eLandings
Enter Number of Skates or Pots Lost
Enter the Flow Scale Weight
https://elandings.atlassian.net/wiki/spaces/doc/pages/16482307/Longline+Pot+Gear+Catcher+Processor+eLogbook+Instructions+for+eLandings
11/14
7/10/22, 1:57 PM
Longline/Pot Gear Catcher Processor eLogbook Instructions for eLandings - eLandings User Documentation - Confluence
If you have a haul that crosses days:
In the Time Hauled data field enter the day in mm/dd format, hit the space bar once and enter the time the set was retrieved.
You can see the proper format in the example below.
After saving the Haul Retrieval you will be brought back to the elogbook Entry screen.
You will need to click on Set 1 to return to that screen so you can access the Add Catch button.
Catch Entry
Click on the Add Catch button
https://elandings.atlassian.net/wiki/spaces/doc/pages/16482307/Longline+Pot+Gear+Catcher+Processor+eLogbook+Instructions+for+eLandings
12/14
7/10/22, 1:57 PM
Longline/Pot Gear Catcher Processor eLogbook Instructions for eLandings - eLandings User Documentation - Confluence
Enter the following information:
Species code
Weight (units can be changed by using the drop down menu)
Count (Id salmon species)
Disposition code (what you intend to do with the fish)
Click on Save.
https://elandings.atlassian.net/wiki/spaces/doc/pages/16482307/Longline+Pot+Gear+Catcher+Processor+eLogbook+Instructions+for+eLandings
13/14
7/10/22, 1:57 PM
Longline/Pot Gear Catcher Processor eLogbook Instructions for eLandings - eLandings User Documentation - Confluence
To download the instructions, click on the link below:
Longline+Pot Gear Catcher Processor eLogbook Instructions for eLandings.pdf
pot
elogbook
longline
https://elandings.atlassian.net/wiki/spaces/doc/pages/16482307/Longline+Pot+Gear+Catcher+Processor+eLogbook+Instructions+for+eLandings
14/14
| File Type | application/pdf |
| File Modified | 2022-07-10 |
| File Created | 2022-07-10 |