BOEM-0329 Permit

BOEM-0329_0.pdf

30 CFR Part 551, Geological and Geophysical Explorations of the OCS

BOEM-0329 Permit

OMB: 1010-0048

Document [pdf]
Download: pdf | pdf
OMB Control Number: 1010-0048
OMB Approval Expires: 1/31/2024

UNITED STATES DEPARTMENT
OF THE INTERIOR
BUREAU OF OCEAN ENERGY MANAGEMENT
(select one)
(Insert Appropriate Regional Office)

PERMIT FOR GEOLOGICAL EXPLORATION
FOR MINERAL RESOURCES OR SCIENTIFIC RESEARCH
ON THE OUTER CONTINENTAL SHELF

In consideration of the terms and conditions contained herein and the authorization
granted hereby, this permit is entered into by and between the United States of America
(the Government), acting through the Bureau of Ocean Energy Management (BOEM) of
the Department of the Interior, and

(Name of Permittee)

(Number and Street)

(City, State, and Zip Code)

PERMIT NUMBER:

DATE:

This permit is issued pursuant to the authority of the Outer Continental Shelf Lands Act,
as amended, (43 U.S.C. 1331 et seq.), hereinafter called the “Act,” and Title 30 Code of
Federal Regulations Part 551 (Geological and Geophysical (G&G) Explorations of the
Outer Continental Shelf).

Paperwork Reduction Act of 1995 (PRA) Statement: This permit refers to information collection
requirements contained in 30 CFR Parts 551 and 251 regulations. The Office of Management and Budget
(OMB) has approved those reporting requirements under OMB Control Number 1010-0048.

Form BOEM-0329 (January 2021) Previous Editions are Obsolete

Page 1 of 11

Section I. Authorization
The Government authorizes the permittee to conduct:
Geological exploration for mineral resources by means other than a deep stratigraphic test,
as defined in 30 CFR 551.1. This activity utilizes geological and geochemical techniques,
including, but not limited to, gas sniffing, various bottom sampling methods, and shallow
test drilling.
Geological scientific research by means other than a deep stratigraphic test, as defined in 30
CFR 551.1. This activity involves drilling and gathering of geological data and
information for scientific research purposes, including, but not limited to, shallow test
drilling.
Geological exploration for mineral resources or scientific research by means of a deep
stratigraphic test, as defined in 30 CFR 551.1, or developing data and information for
proprietary use or sale.
This permit authorizes the permittee to conduct the above geological activity during the period from
to
in the following area(s):
.
The permittee shall not conduct any geological operation outside of the permitted area specified
here in. Extensions of the time period specified above must be requested in writing. A permit plus
extensions for activities other than a deep stratigraphic test will be limited to a period of not more
than 1 year from the original specified issuance date of the permit. The duration of a permit for a
deep stratigraphic test must be controlled in accordance with 30 CFR 551.7. Group participation in
test drilling activities, bonds, inspection and reporting of geological exploration activities,
suspension and cancellation of authority to conduct exploration or scientific research activities under
permit and penalties, and appeals must be carried out in accordance with 30 CFR 551.7,
551.8, 551.9, and 551.10.
The authority of the Regional Director may be delegated to the appropriate Regional Supervisor
for the purposes of this permit.
Section II. Type(s) of Operations and Technique(s)
A. The permittee will employ the following type(s) of operations:
;
and will utilize the following instruments and/or technique(s) in such operations:
.
B. The permittee will conduct all activities in compliance with the terms and conditions of
this permit, including the " Stipulations," "Environmental Protective Provisions," and the
approved "Application for Permit, which are attached to and incorporated into this permit.
Any additional mitigations will be included in the permit cover letter.
C. The permittee will conduct all geological exploration or scientific research activities in
compliance with the Act, the regulations in 30 CFR Parts 551 and 251, and other applicable
Form BOEM-0329 (January 2021) Previous Editions are Obsolete

Page 2 of 11

statutes and regulations whether such statutes and regulations are enacted, promulgated,
issued, or amended before or after this permit is issued. Some of the provisions of 30 CFR
Parts 551 and 251 are restated in this permit for emphasis. However, all of the provisions of
30 CFR Parts 551 and 251 apply to this permit.
Section III. Reports on Operations
A. Status Reports
1. In the Gulf of Mexico and Atlantic OCS Regions:
The permittee must submit status reports every two months in a manner approved or prescribed by
the Regional Supervisor, Resource Evaluation (here after, except in Section V wherein Supervisor
refers to the Regional Supervisor for Operations, referred to as Supervisor). The report must include
a map of appropriate scale showing sampling locations, protraction areas, blocks, and block numbers
(if map scale permits). The map should be a cumulative update for each status report and clearly
distinguish between planned sampling locations (one color) and those locations in which samples
have already been collected (a second color). The map should be submitted in digital format,
preferably as a GeoPDF.
2. In the Alaska and Pacific OCS Regions:
The permittee must submit status reports on a weekly basis, beginning when the permittee enters
the permit area in a manner approved or prescribed by the Regional Supervisor, Resource
Evaluation (here after, except in Section V wherein Supervisor refers to the Regional Supervisor,
Leasing and Plans, referred to as Supervisor). The report must include a map of appropriate scale
showing sampling locations, OCS blocks with OCS block numbers (if map scale permits), and the
OCS boundary or other important boundaries as specified. The map should be a cumulative update
for each status report and clearly distinguish between planned sampling locations (one color) and
those locations in which samples have already been collected (a second color). The map should be
submitted in digital format, preferably as a PDF and an ESRI file – gdb-feature class(s) or shape
files of the weekly data collection. All maps must be submitted in NAD 83.
B. The permittee must submit to the Supervisor a Final Report within 30 days after the
completion of operations. The Final Report must contain the following:
1. In the Gulf of Mexico and Atlantic OCS Regions:
i. A brief description of the work performed including number of samples acquired as
well as coring, drilling, and sampling methods including depth of penetration;
ii. A brief daily log of operations. A suggested format for the daily log of operations would
include, but is not limited to, a table that provides a date column and an operations
column. Preferably, the date column would commence on the date in which the vessel
begins to transit to the permitted area and end on the date in which the vessel either
transits away from the permitted area or when operations pertinent to the permitted
activity ceases. The corresponding operations column would contain a brief description
of the operations for each day listed in the date column noting activities such major
work stoppages, and other pertinent activities. This may be submitted as a digital Word
document or as an Excel spreadsheet;

Form BOEM-0329 (January 2021) Previous Editions are Obsolete

Page 3 of 11

iii. A PDF or, preferably a GeoPDF or shape file depicting the areas and blocks in
which any exploration or scientific research activities were conducted. These
graphics must clearly indicate the location of the activities so that the data
produced from the activities can be accurately located and identified;
iv. The start and finish dates on which the actual geological exploration or scientific
research activities were performed;
v. A narrative summary of any: (a) hydrocarbon slick or environmental hazards observed
and (b) adverse effects of the geological exploration or scientific research activities on
the environment, aquatic life, archaeological resources, or other uses of the area in
which the activities were conducted;
vi. The estimated date on which the processed or analyzed data or information will be
available for inspection by BOEM;
vii. A CD or DVD containing all of the data or sample locations in latitude/longitude degrees
(and/or x,y coordinates). The data should also be submitted as an ESRI shapefile(s)
illustrating the location of all Geological data collection;
viii. Identification of geocentric ellipsoid (NAD 27 or NAD 83) used as a reference for the
data or sample locations; and
ix. Such other descriptions of the activities conducted as may be specified by the
Supervisor.
2. In the Alaska and Pacific OCS Regions:
i. A brief description of the work performed including number of samples acquired as well
as coring, drilling, and sampling methods including depth of penetration;
ii. A brief summary of operations that provides, but is not limited to, the name of the
survey, the date, the number of samples collected each day, and a discussion of any
operational or environmental issues that occurred (e.g., major work stoppages, no data
acquired, safety incidents, protected species mitigation actions, and other pertinent
activities). Provide the date for the start of operations and the end date when operations
pertinent to the permitted activity are completed.
iii. A PDF map(s) and a geodatabase file(s) or shape file(s) depicting the areas and OCS
blocks and OCS boundary/3-mile limit in which any exploration or scientific research
activities were conducted. These graphics must clearly indicate the location of the
activities so that the data produced from the activities can be accurately located and
identified;
iv. The start and finish dates on which the actual geological exploration or scientific research
activities were performed;
v. A narrative summary of any: (a) hydrocarbon slicks or environmental hazards observed,
and (b) adverse effects of the geological exploration or scientific research activities on
the environment, aquatic life, archaeological resources, or other uses of the area in which
the activities were conducted;
Form BOEM-0329 (January 2021) Previous Editions are Obsolete

Page 4 of 11

vi. The estimated date on which the processed or analyzed data or information will be
available for inspection by BOEM;
vii. A CD or DVD of a single, final edited navigational data file, coded in ASCII,
containing all of the data or sample locations in latitude/longitude degrees (and/or x, y
coordinates). The data should also be submitted as an ESRI file – gdb-feature class(s)
or shape file(s) illustrating the location of all Geological data collection.
viii. Identification of geocentric ellipsoid, which in the Alaska and Pacific Regions must be
NAD 83, used as a reference for the data or sample locations; and
ix. Such other descriptions of the activities conducted as may be specified by the
Supervisor.
Section IV. Permit or Notice Requirements for Shallow Test Drilling
Before any shallow test drilling begins for exploration for mineral resources or for scientific
research, the Supervisor may require for permits, or recommend for notices, the gathering and
submission of geophysical data and information sufficient to determine shallow structural detail
across and in the vicinity of the proposed test. Data and information may include, but are not
limited to, seismic, bathymetric, side-scan sonar, and magnetometer systems, across and in the
vicinity of the proposed test. When required, 30 CFR 551.7(a) will apply to permits issued for
shallow test drilling. All Outer Continental Shelf (OCS) regulations relating to drilling operations
in 30 CFR Part 550 and 250 apply, as appropriate, to drilling activities authorized under this
section.
Section V. Permit Requirements for a Deep Stratigraphic Test
A. No deep stratigraphic test drilling activities may be initiated or conducted until a Drilling Plan is
submitted to the Regional Supervisor, Leasing and Plans; in the Pacific, submit to the BOEM
Regional Director; and an Application for Permit to Drill is submitted by the applicant and
approved by the BSEE Regional Director (BSEE-RD); in Alaska, submit to the BSEE Alaska
Regional Director; in the Pacific, submit to the BSEE Pacific Regional Director. The Drilling
Plan must include:
1. The proposed type of sequence of drilling activities to be undertaken together with a
timetable for their performance from commencement to completion;
2. A description of the drilling rig proposed for use, unless a description has been previously
submitted to the Supervisor, indicating the important features thereof, with special attention to
safety features and pollution prevention and control features, including oil spill containment
and cleanup plans and onshore disposal procedures;
3. The location of deep stratigraphic test to be conducted, including the surface and projected
bottomhole location of the borehole;
4. The types of geological and geophysical instrumentation to be used for site surveys;
5. Geophysical data and information sufficient to evaluate seafloor characteristics, shallow
geologic and man-made hazards, and structural detail across and in the vicinity of the
proposed test to the total depth of the proposed test well. Data and information from sideForm BOEM-0329 (January 2021) Previous Editions are Obsolete

Page 5 of 11

scan sonar and magnetometer surveys must be submitted as required, at the option of the
Supervisor; and
6. Such other relevant data and information as the Supervisor may require.
B. At the same time the applicant submits a Drilling Plan to the Supervisor, an Environmental Report
must be submitted. The report must be in summary form and should include information available
at the time the related Drilling Plan is submitted. Data and information that are site-specific, or that
are developed subsequent to the most recent Environmental Impact Statement or other
environmental analyses in the immediate area, must be specifically considered. The applicant must
summarize and provide references for data, information, and issues specific to the site of drilling
activity in the related plan, and in other environmental reports, analyses, and impact statements
prepared for the geographic area. Any material based on proprietary data, which is not itself
available for inspection, should not be referenced. The Environmental Report must include the
following:
1. (a) A list and description of new or unusual technologies that are to be used, (b) the location
of travel routes for supplies and personnel and a description of all vessels to be used, (c) the
kinds and approximate levels of energy sources to be used, (d) the environmental monitoring
systems that are to be used, and (e) suitable maps and diagrams showing details of the
proposed project layout;
2. A narrative description of the existing environment. This section must include the following
information on the area: (a) geology, (b) physical oceanography, (c) other uses of the area, (d)
flora and fauna, (e) existing environmental monitoring systems, and (f) other unusual or unique
characteristics that may affect or be affected by the drilling activities;
3. A narrative description of the probable impacts of the proposed action on the environment
and the measures proposed for mitigating these impacts;
4. A narrative description of any unavoidable or irreversible adverse effects on the environment
that could be expected to occur as a result of the proposed action; and
5. Such other relevant data and information as the Supervisor may require.
C. Any revisions to an approved Drilling Plan must be approved by the Supervisor.
D. All OCS regulations relating to drilling operations in 30 CFR Parts 550 and 250 apply, as
appropriate, to drilling activities authorized under this Permit.
E. At the completion of the test activities, the borehole of all deep stratigraphic tests must be
permanently plugged and abandoned by the permittee before moving the rig off location in
accordance with the requirements of the regulations in 30 CFR Parts 550 and 250.

Section VI. Submission, Inspection, and Selection of Geological Data and Information
A. The permittee must notify the Supervisor, in writing, when the permittee has completed the initial
analysis, processing, or interpretation of any geological data and information collected under an
exploration permit or a scientific research permit that involves developing data and information for
proprietary use or sale. If the Supervisor asks if the permittee has further analyzed, processed, or
interpreted any geological data and information collected under a permit, the permittee must
Form BOEM-0329 (January 2021) Previous Editions are Obsolete

Page 6 of 11

respond within 30 days. If the data or information are further analyzed or reprocessed, it is the
responsibility of the permittee to keep the most current resulting products available in the event the
Supervisor requests the current status of data analysis or processing. At any time within 10 years after
receiving notification of the completion of the acquisition activities conducted under the permit, the
Supervisor may request that the permittee submit for inspection and possible retention all or part of the
geological data, analyzed geological information, processed geological information, and interpreted
geological information.
After a period of 10 years from the issuance of the permit, the permittee must notify the Supervisor in
writing if their intention is to no longer maintain all or part of the geological data, analyzed geological
information, processed geological information, and interpreted geological information, and provide the
Supervisor 30 days to request that the permittee submit for inspection and possible retention all or part
of the geological data, analyzed geological information, processed geological information, and
interpreted geological information.
B. In the event that a third party obtains geological data, analyzed geological information, processed
geological information, or interpreted geological information from a permittee or from another third
party by sale, trade, license agreement, or other means:
1. The third party recipient of the data and information assumes the obligations under this section,
except for notification of initial analysis, processing, and interpretation of the data and information,
and is subject to the penalty provisions of 30 CFR Part 550, Subpart N;
2. A permittee or third party that sells, trades, licenses, or otherwise provides the data and information
must advise the recipient, in writing, that accepting these obligations is a condition precedent of the
sale, trade, license, or other agreement; and
3. Except for license agreements, a permittee or third party that sells, trades, or otherwise provides data
and information to a third party, must advise the Supervisor in writing within 30 days of the sale,
trade, or other agreement, including the identity of the recipient of the data and information; or
4. With regard to license agreements, a permittee or third party that licenses data and information to a
third party, within 30 days of a request by the Supervisor, must advise the Supervisor, in writing, of
the license agreement, including the identity of the recipient of the data and information.
C. Each submission of geological data, analyzed geological information, processed geological information,
and interpreted geological information must contain, unless otherwise specified by the Supervisor, the
following:
1. An accurate and complete record of geological (including geochemical) data,
analyzed geological information, processed geological information, and interpreted geological
information resulting from each operation;
2. Paleontological reports identifying microscopic fossils by depth, and/or washed samples of drill
cuttings normally maintained by the permittee for paleontological determination and are made
available upon request by the Supervisor. In addition, any other samples or cores requested by the
Supervisor are made available on request;
3. Copies of well logs and charts: one paper copy, one copy on a reproducible stable base, and
copies of composite digital well logs on magnetic tape or other suitable medium in a format
approved by the Supervisor;
4. Data and results obtained from formation fluid test;
5. Analyses of core or bottom samples or a representative cut or split of the core or bottom sample;
Form BOEM-0329 (January 2021) Previous Editions are Obsolete

Page 7 of 11

6. Detailed descriptions of any hydrocarbons or hazardous conditions encountered
during operations, including near losses of well-control, abnormal geopressure, and
losses of circulation; and
7. Such other geological data, analyzed geological information, processed geological
information, and interpreted geological information as may be specified by the

Supervisor.
Section VII. Reimbursement to Permittees
A. After the delivery of geological data, analyzed geological information, processed geological
information, and interpreted geological information requested by the Supervisor in
accordance with subsection VI of this permit, and upon receipt of a request for reimbursement
and a determination by BOEM that the requested reimbursement is proper, BOEM will
reimburse the permittee or third party for the reasonable costs of reproducing the submitted
data and information at the permittee's or third party's lowest rate or at the lowest commercial
rate established in the area, whichever is less.
B. The permittee or third party will not be reimbursed for the costs of acquiring, analyzing,
or interpreting geological information.
Section VIII. Disclosure of Data and Information to the Public
A. BOEM will make data and information submitted by a permittee available in accordance with
the requirements and subject to the limitations of the Freedom of Information Act (5 U.S.C.
552) and the implementing regulations (43 CFR Part 2), the requirements of the Act, and the
regulations contained in 30 CFR Parts 550 and 250 (Oil and Gas and Sulphur Operations in the
Outer Continental Shelf), 30 CFR Part 551, and 30 CFR Part 552 (Outer Continental Shelf
(OCS) Oil and Gas Information Program).
B. Except as specified in this section, or Section X of this form, or in 30 CFR Parts 550, 551 552,
and 250, no data or information determined by BOEM to be exempt from public disclosure under
subsection A of this section will be provided to any affected State or be made available to the
executive of any affected local government or to the public unless the permittee or third party
and all persons to whom such permittee has sold, traded, or licensed the data or information
under promise of confidentiality agree to such an action.
C. Geological data, analyzed geological information, processed geological information, and
interpreted geological information submitted under a permit, and retained by BOEM will
be disclosed as follows:
1. The Director, BOEM, will immediately issue a public announcement when any significant
hydrocarbon occurrences are detected or environmental hazards are encountered on unleased
lands during drilling operations. In the case of significant hydrocarbon occurrences, the
Director will announce such occurrences in a form and manner that will further the national
interest without unduly damaging the competitive position of those conducting the drilling.
Other data and information pertaining to the permit will be released as indicated under 30
CFR 551.14.
2. BOEM will make available to the public all processed geological data, analyzed geological
information, processed geological information, and interpreted geological
Form BOEM-0329 (January 2021) Previous Editions are Obsolete

Page 8 of 11

information (except geological data, analyzed geological information, processed
geological information, and interpreted geological information obtained from drilling a
deep stratigraphic test) 10 years after the date of issuance of the permit under which the
data and information were obtained (30 CFR 551.14); and
3. BOEM will make available to the public all geological data and information related to a
deep stratigraphic test at the earlier of the following times: (a) 25 years after the
completion of the test, or (b) for a lease sale held after the test well is completed, 60
calendar days after the Department of the Interior executes the first lease for a block, any
part of which is within 50 geographic miles (92.6 kilometers) of the site of the completed
test.
D. All other information submitted as a requirement of 30 CFR 551.8 and determined by BOEM to be
exempt from public disclosure will be considered as "PROPRIETARY." Such data and information
will not be made available to the public without the consent of the permittee for a period of 10 years
from the date of issuance of the permit; unless the Director, BOEM, determines that earlier release is
necessary for the proper development of the area permitted. The executed permit will be considered
as "NONPROPRIETARY" and will be available to the public upon request and also on BOEM’s
website.
E. The identities of third party recipients of data and information collected under a permit will be
kept confidential. The identities will not be released unless the permittee and the third parties
agree to the disclosure.

Section IX. Disclosure to Independent Contractors
BOEM reserves the right to disclose any data or information acquired from a permittee to an
independent contractor or agent for the purpose of reproducing, analyzing, processing, or interpreting
such data or information. When practicable, BOEM will advise the permittee who provided the data
or information of intent to disclose the data or information to an independent contractor or agent.
BOEM notice of intent will afford the permittee a period of not less than 5 working days within
which to comment on the intended action. When BOEM so advises a permittee of the intent to
disclose data or information to an independent contractor or agent, all other owners of such data or
information will be deemed to have been notified of BOEM’s intent. Prior to any such disclosure, the
contractor or agent will be required to execute a written commitment not to sell, trade, license, or
disclose any data or information to anyone without the express consent of BOEM.

Section X. Sharing of Information with Affected States
A. At the time of soliciting nominations for the leasing of lands within 3 geographic miles of the
seaward boundary of any coastal State, BOEM, pursuant to the provisions of 30 CFR 552.7 and
subsections 8(g) and 26(e) of the Act (43 U.S.C. 1337(g) and 1352(e)), will provide the Governor
of the State (or the Governor's designated representative) the following information that has been
acquired by the Supervisor on such lands proposed to be offered for leasing:
1. All information on the geographical, geological, and ecological characteristics of the areas
and regions proposed to be offered for leasing;
2. An estimate of the oil and gas reserves in the area proposed for leasing; and
Form BOEM-0329 (January 2021) Previous Editions are Obsolete

Page 9 of 11

3. An identification of any field, geological structure, or trap located within 3 miles of the
seaward boundary of the State.
B. After the time of receipt of nominations for any area of the OCS within 3 geographic miles of the
seaward boundary of any coastal State and Area Identification in accordance with the provisions of
Subparts D and E of 30 CFR Part 556, BOEM, in consultation with the Governor of the State (or the
Governor's designated representative), will determine whether any tracts being given further
consideration for leasing may contain one or more oil or gas reservoirs underlying both the OCS and
lands subject to the jurisdiction of the State.
C. At any time prior to a sale, information acquired by BOEM that pertains to the identification of
potential and/or proven common hydrocarbon-bearing areas within 3 geographic miles of the
seaward boundary of any such State will be shared, upon request by the Governor and pursuant to
the provisions of 30 CFR 552.7 and subsections 8(g) and 26(e) of the Act, with the Governor of
such State (or the Governor's designated representative).
D. Knowledge obtained by a State official who receives information under subsections A, B, and C
of this section will be subject to the requirements and limitations of the Act, the regulations
contained in 30 CFR Parts 550, 551, 552, and 250.

Section XI. Fishermen's Contingency Fund
For deep stratigraphic test drilling activities as described under Section V of this permit, the permittee
must meet the requirements of establishing an account with the Fishermen's Contingency Fund for the
drilling activities area pursuant to Title IV [Subsection 402(b)] of the Act and pay assessment as
required in 50 CFR 296.3 (Chapter 11 - National Marine Fisheries Service; Subchapter J Continental Shelf). The amount of the assessment is specified by the Secretary of Commerce,
collected by the Director, BOEM, and deposited in the fund to be appropriate account.

Section XII. Permit Modifications
The Department will have the right at any time to modify or amend any provisions of this permit,
except that the Department will not have such right with respect to the provisions of Sections VIII,
IX, and X hereof, unless required by an Act of Congress.

Form BOEM-0329 (January 2021) Previous Editions are Obsolete

Page 10 of 11

IN WITNESS WHEREOF the parties have executed this permit and it will be effective as of the date of
signature by the Supervisor.

PERMITTEE:

THE UNITED STATES OF AMERICA:

(Signature of Permittee)

(Signature of Regional Supervisor)

(Type or Print Name of Permittee)

(Type or Print Name of Regional Supervisor)

(Title)

(Date)

(Date)

Form BOEM-0329 (January 2021) Previous Editions are Obsolete

Page 11 of 11


File Typeapplication/pdf
File TitleBOEM 0329
AuthorHoffman, Virginia
File Modified2021-01-14
File Created2015-07-21

© 2024 OMB.report | Privacy Policy