Form SF 330 SF 330 Architect-Engineer Qualifications

Architect-Engineer Qualifications (SF 330)

SF 330_7.2021

Architect-Engineer Qualifications (SF 330)

OMB: 9000-0157

Document [pdf]

Download: pdf | pdf

ARCHITECT-ENGINEER QUALIFICATIONS

OMB Control Number: 9000-0157
Expiration Date: 2/29/2024

Paperwork Reduction Act Statement - This information collection meets the requirements of 44 USC § 3507, as amended by section 2 of the Paperwork
Reduction Act of 1995. You do not need to answer these questions unless we display a valid Office of Management and Budget (OMB) control number.
The OMB control number for this collection is 9000-0157. We estimate that it will take 29 hours (25 hours for part 1 and 4 hours for Part 2) to read the
instructions, gather the facts, and answer the questions. Send only comments relating to our time estimate, including suggestions for reducing this
burden, or any other aspects of this collection of information to: U.S. General Services Administration, Regulatory Secretariat Division (M1V1CB), 1800 F
Street, NW, Washington, DC 20405.

PURPOSE

DEFINITIONS

Federal agencies use this form to obtain information from
architect-engineer (A-E) firms about their professional
qualifications. Federal agencies select firms for A-E contracts on
the basis of professional qualifications as required by 40 U.S.C.
chapter 11, Selection of Architects Engineers, and Part 36 of the
Federal Acquisition Regulation (FAR).

Architect-Engineer Services: Defined in FAR 2.101.

The Selection of Architects and Engineers statute requires the
public announcement of requirements for A-E services (with
some exceptions provided by other statutes), and the selection of
at least three of the most highly qualified firms based on
demonstrated competence and professional qualifications
according to specific criteria published in the announcement.
The Act then requires the negotiation of a contract at a fair and
reasonable price starting first with the most highly qualified firm.
The information used to evaluate firms is from this form and other
sources, including performance evaluations, any additional data
requested by the agency, and interviews with the most highly
qualified firms and their references.

Branch Office: A geographically distinct place of business or
subsidiary office of a firm that has a key role on the team.
Discipline: Primary technical capabilities of key personnel, as
evidenced by academic degree, professional registration,
certification, and/or extensive experience.
Firm: Defined in FAR 36.102.
Key Personnel: Individuals who will have major contract
responsibilities and/or provide unusual or unique expertise.

SPECIFIC INSTRUCTIONS
Part I - Contract-Specific Qualifications
Section A. Contract Information.
1. Title and Location. Enter the title and location of the
contract for which this form is being submitted, exactly as shown
in the public announcement or agency request.

GENERAL INSTRUCTIONS
Part I presents the qualifications for a specific contract.
Part II presents the general qualifications of a firm or a specific
branch office of a firm. Part II has two uses:
1. An A-E firm may submit Part II to the appropriate central,
regional or local office of each Federal agency to be kept on file.
A public announcement is not required for certain contracts, and
agencies may use Part II as a basis for selecting at least three of
the most highly qualified firms for discussions prior to requesting
submission of Part I. Firms are encouraged to update Part II on
file with agency offices, as appropriate, according to FAR Part
36. If a firm has branch offices, submit a separate Part II for
each branch office seeking work.
2. Prepare a separate Part II for each firm that will be part of
the team proposed for a specific contract and submitted with Part
I. If a firm has branch offices, submit a separate Part II for each
branch office that has a key role on the team.

2. Public Notice Date. Enter the posted date of the agency's
notice on the Federal Business Opportunity website
(FedBizOpps), other form of public announcement or agency
request for this contract.
3. Solicitation or Project Number.
Enter the agency's
solicitation number and/or project number, if applicable,
exactly as shown in the public announcement or agency request
for this contract.
Section B. Architect-Engineer Point of Contact.
4-8. Name, Title, Name of Firm, Telephone Number, Fax
(Facsimile) Number and E-mail (Electronic Mail) Address.
Provide information for a representative of the prime contractor
or joint venture that the agency can contact for additional
information.

INDIVIDUAL AGENCY INSTRUCTIONS
Individual agencies may supplement these instructions. For
example, they may limit the number of projects or number of
pages submitted in Part I in response to a public announcement
for a particular project. Carefully comply with any agency
instructions when preparing and submitting this form. Be as
concise as possible and provide only the information requested
by the agency.
AUTHORIZED FOR LOCAL REPRODUCTION

STANDARD FORM 330 (REV. 7/2021) PAGE 1 OF INSTRUCTIONS
Prescribed by GSA - FAR (48 CFR) 53.236-2(b)

Section C. Proposed Team.
9-11. Firm Name, Address, and Role in This Contract.
Provide the contractual relationship, name, full mailing address,
and a brief description of the role of each firm that will be
involved in performance of this contract. List the prime
contractor or joint venture partners first. If a firm has branch
offices, indicate each individual branch office that will have a key
role on the team. The named subcontractors and outside
associates or consultants must be used, and any change must
be approved by the contracting officer. (See FAR Part 52 Clause
"Subcontractors and Outside Associates and Consultants
(Architect-Engineer Services)"). Attach an additional sheet in the
same format as Section C if needed.
Section D. Organizational Chart of Proposed Team.
As an attachment after Section C, present an organizational
chart of the proposed team showing the names and roles of all
key personnel listed in Section E and the firm they are
associated with as listed in Section C.
Section E. Resumes of Key Personnel Proposed for this
Contract.
Complete this section for each key person who will
participate in this contract. Group by firm, with personnel of the
prime contractor or joint venture partner firms first. The following
blocks must be completed for each resume:
12. Name. Self-explanatory.
13. Role in this contract. Self-explanatory.
14. Years Experience. Total years of relevant experience
(block 14a), and years of relevant experience with current firm,
but not necessarily the same branch office (block 14b).
15. Firm Name and Location. Name, city and state of the
firm where the person currently works, which must correspond
with one of the firms (or branch office of a firm, if appropriate)
listed in Section C.
16. Education. Provide information on the highest relevant
academic degree(s) received. Indicate the area(s) of
specialization for each degree.
17. Current Professional Registration. Provide information
on current relevant professional registration(s) in a State or
possession of the United States, Puerto Rico, or the District of
Columbia according to FAR Part 36.
18. Other Professional Qualifications. Provide information
on any other professional qualifications relating to this contract,
such as education, professional registration, publications,
organizational memberships, certifications, training, awards, and
foreign language capabilities.

19. Relevant Projects. Provide information on up to five
projects in which the person had a significant role that
demonstrates the person's capability relevant to her/his proposed
role in this contract. These projects do not necessarily have to
be any of the projects presented in Section F for the project team
if the person was not involved in any of those projects or the
person worked on other projects that were more relevant than
the team projects in Section F. Use the check box provided to
indicate if the project was performed with any office of the current
firm. If any of the professional services or construction projects
are not complete, leave Year Completed blank and indicate the
status in Brief Description and Specific Role (block (3)).
Section F. Example Projects Which Best Illustrate Proposed
Team's Qualifications for this Contract.
Select projects where multiple team members worked
together, if possible, that demonstrate the team's capability to
perform work similar to that required for this contract. Complete
one Section F for each project. Present ten projects, unless
otherwise specified by the agency. Complete the following
blocks for each project:
20. Example Project Key Number. Start with "1" for the first
project and number consecutively.
21. Title and Location. Title and location of project or
contract. For an indefinite delivery contract, the location is the
geographic scope of the contract.
22. Year Completed. Enter the year completed of the
professional services (such as planning, engineering study,
design, or surveying), and/or the year completed of construction,
if applicable. If any of the professional services or the
construction projects are not complete, leave Year Completed
blank and indicate the status in Brief Description of Project and
Relevance to this Contract (block 24).
23a. Project Owner. Project owner or user, such as a
government agency or installation, an institution, a corporation or
private individual.
23b. Point of Contact Name. Provide name of a person
associated with the project owner or the organization which
contracted for the professional services, who is very familiar with
the project and the firm's (or firms') performance.
23c. Point of Contact Telephone Number. Self-explanatory.
24. Brief Description of Project and Relevance to this
Contract. Indicate scope, size, cost, principal elements and
special features of the project. Discuss the relevance of the
example project to this contract. Enter any other information
requested by the agency for each example project.

STANDARD FORM 330 (REV. 7/2021)
PAGE 2 OF INSTRUCTIONS

29. Example Projects Key. List the key numbers and titles of
the example projects in the same order as they appear in Section
F.

25. Firms from Section C Involved with this Project. Indicate
which firms (or branch offices, if appropriate) on the project team
were involved in the example project, and their roles. List in the
same order as Section C.

Section H. Additional Information.

Section G. Key Personnel Participation in Example Projects.

30. Use this section to provide additional information
specifically requested by the agency or to address selection
criteria that are not covered by the information provided in
Sections A-G.

This matrix is intended to graphically depict which key
personnel identified in Section E worked on the example projects
listed in Section F. Complete the following blocks (see example
below).

Section I. Authorized Representative.

26. and 27. Names of Key Personnel and Role in this
Contract. List the names of the key personnel and their
proposed roles in this contract in the same order as they appear
in Section E.

31. and 32. Signature of Authorized Representative and
Date. An authorized representative of a joint venture or the
prime contractor must sign and date the completed form.
Signing attests that the information provided is current and
factual, and that all firms on the proposed team agree to work on
the project. Joint ventures selected for negotiations must make
available a statement of participation by a principal of each
member of the joint venture.

28. Example Projects Listed in Section F. In the column
under each project key number (see block 29) and for each key
person, place an "X" under the project key number for
participation in the same or similar role.

33. Name and Title. Self-explanatory.

SAMPLE ENTRIES FOR SECTION G (MATRIX)
26. NAMES OF KEY
PERSONNEL
(From Section E,
Block 12)

27. ROLE IN THIS
CONTRACT
(From Section E,
Block 13)

28. EXAMPLE PROJECTS LISTED IN SECTION F
(Fill in "Example Projects Key" section below first, before
completing table. Place "X" under project key number for
participation in same or similar role.)
1

Jane A. Smith

Chief Architect

Joseph B. Williams Chief Mechanical Engineer
Tara C. Donovan

Chief Electricial Engineer

X
X

29. EXAMPLE PROJECTS KEY
NUMBER

TITLE OF EXAMPLE PROJECT (From Section F)

NUMBER

TITLE OF EXAMPLE PROJECT (From Section F)

Federal Courthouse, Denver, CO

XYZ Corporation Headquarters, Boston, MA

Justin J. Wilson Federal Building,
Baton Rouge, LA

Founder's Museum, Newport, RI

STANDARD FORM 330 (REV. 7/2021)
PAGE 3 OF INSTRUCTIONS

Part II - General Qualifications
See the "General Instructions" on page 1 for firms with branch
offices. Prepare Part II for the specific branch office seeking
work if the firm has branch offices.
1. Solicitation Number. If Part II is submitted for a specific
contract, insert the agency's solicitation number and/or project
number, if applicable, exactly as shown in the public
announcement or agency request.
2a-2e. Firm (or Branch Office) Name and Address. Selfexplanatory.
3. Year Established. Enter the year the firm (or branch
office, if appropriate) was established under the current name.
4. Unique Entity Identifier. Insert the unique entity identifier
issued by the entity designated at SAM. See FAR part 4.6.
5. Ownership.
a. Type. Enter the type of ownership or legal structure of the
firm (sole proprietor, partnership, corporation, joint venture, etc.).
b. Small Business Status. Refer to the North American
Industry Classification System (NAICS) code in the public
announcement, and indicate if the firm is a small business
according to the current size standard for that NAICS code (for
example, Engineering Services (part of NAICS 541330),
Architectural Services (NAICS 541310), Surveying and Mapping
Services (NAICS 541370)). The small business categories and
the internet website for the NAICS codes appear in FAR part 19.
Contact the requesting agency for any questions. Contact your
local U.S. Small Business Administration office for any questions
regarding Business Status.
6a-6c. Point of Contact. Provide this information for a
representative of the firm that the agency can contact for
additional information. The representative must be empowered
to speak on contractual and policy matters.
7. Name of Firm. Enter the name of the firm if Part II is
prepared for a branch office.
8a-8c. Former Firm Names. Indicate any other previous
names for the firm (or branch office) during the last six years.
Insert the year that this corporate name change was effective
and the associated unique entity identifier. This information is
used to review past performance on Federal contracts.

9. Employees by Discipline. Use the relevant disciplines and
associated function codes shown at the end of these instructions
and list in the same numerical order. After the listed disciplines,
write in any additional disciplines and leave the function code
blank. List no more than 20 disciplines. Group remaining
employees under "Other Employees" in column b. Each person
can be counted only once according to his/her primary function.
If Part II is prepared for a firm (including all branch offices), enter
the number of employees by disciplines in column c(1). If Part II
is prepared for a branch office, enter the number of employees
by discipline in column c(2) and for the firm in column c(1).
10. Profile of Firm's Experience and Annual Average
Revenue for Last 5 Years. Complete this block for the firm or
branch office for which this Part II is prepared. Enter the
experience categories which most accurately reflect the firm's
technical capabilities and project experience. Use the relevant
experience categories and associated profile codes shown at the
end of these instructions, and list in the same numerical order.
After the listed experience categories, write in any unlisted
relevant project experience categories and leave the profile
codes blank. For each type of experience, enter the appropriate
revenue index number to reflect the professional services
revenues received annually (averaged over the last 5 years) by
the firm or branch office for performing that type of work. A
particular project may be identified with one experience category
or it may be broken into components, as best reflects the
capabilities and types of work performed by the firm. However,
do not double count the revenues received on a particular
project.
11. Annual Average Professional Services Revenues of Firm
for Last 3 Years. Complete this block for the firm or branch office
for which this Part II is prepared. Enter the appropriate revenue
index numbers to reflect the professional services revenues
received annually (averaged over the last 3 years) by the firm or
branch office. Indicate Federal work (performed directly for the
Federal Government, either as the prime contractor or
subcontractor), non-Federal work (all other domestic and foreign
work, including Federally-assisted projects), and the total.
12. Authorized Representative. An authorized
representative of the firm or branch office must sign and date the
completed form. Signing attests that the information provided is
current and factual. Provide the name and title of the authorized
representative who signed the form.

STANDARD FORM 330 (REV. 7/2021)
PAGE 4 OF INSTRUCTIONS

List of Disciplines (Function Codes)
Code
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31

Description
Acoustical Engineer
Administrative
Aerial Photographer
Aeronautical Engineer
Archeologist
Architect
Biologist
CADD Technician
Cartographer
Chemical Engineer
Chemist
Civil Engineer
Communications Engineer
Computer Programmer
Construction Inspector
Construction Manager
Corrosion Engineer
Cost Engineer/Estimator
Ecologist
Economist
Electrical Engineer
Electronics Engineer
Environmental Engineer
Environmental Scientist
Fire Protection Engineer
Forensic Engineer
Foundation/Geotechnical Engineer
Geodetic Surveyor
Geographic Information System Specialist
Geologist
Health Facility Planner

Code
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62

Description
Hydraulic Engineer
Hydrographic Surveyor
Hydrologist
Industrial Engineer
Industrial Hygienist
Interior Designer
Land Surveyor
Landscape Architect
Materials Engineer
Materials Handling Engineer
Mechanical Engineer
Mining Engineer
Oceanographer
Photo Interpreter
Photogrammetrist
Planner: Urban/Regional
Project Manager
Remote Sensing Specialist
Risk Assessor
Safety/Occupational Health Engineer
Sanitary Engineer
Scheduler
Security Specialist
Soils Engineer
Specifications Writer
Structural Engineer
Technician/Analyst
Toxicologist
Transportation Engineer
Value Engineer
Water Resources Engineer

STANDARD FORM 330 (REV. 7/2021)
PAGE 5 OF INSTRUCTIONS

List of Experience Categories (Profile Codes)
Code
A01

Description
Acoustics, Noise Abatement

Code
E01
E02
E03
E04
E05
E06
E07
E08
E09

Description
Ecological & Archeological Investigations
Educational Facilities; Classrooms
Electrical Studies and Design
Electronics
Elevators; Escalators; People-Movers
Embassies and Chanceries
Energy Conservation; New Energy Sources
Engineering Economics
Environmental Impact Studies,
Assessments or Statements

E10

Environmental and Natural Resource
Mapping

E11
E12
E13

Environmental Planning
Environmental Remediation
Environmental Testing and Analysis

F01
F02
F03
F04
F05
F06

Fallout Shelters; Blast-Resistant Design
Field Houses; Gyms; Stadiums
Fire Protection
Fisheries; Fish ladders
Forensic Engineering
Forestry & Forest products

G01

Garages; Vehicle Maintenance Facilities;
Parking Decks

A02

Aerial Photography; Airborne Data and Imagery
Collection and Analysis

A03

Agricultural Development; Grain Storage; Farm Mechanization

A04

Air Pollution Control

A05

Airports; Navaids; Airport Lighting; Aircraft Fueling

A06

Airports; Terminals and Hangars; Freight Handling

A07

Arctic Facilities

A08

Animal Facilities

A09

Anti-Terrorism/Force Protection

A10

Asbestos Abatement

A11

Auditoriums & Theaters

A12

Automation; Controls; Instrumentation

B01
B02

Barracks; Dormitories
Bridges

C01

Cartography

C02

Cemeteries (Planning & Relocation)

C03

Charting: Nautical and Aeronautical

C04

Chemical Processing & Storage

C05

Child Care/Development Facilities

C06

Churches; Chapels

C07

Coastal Engineering

G02

Gas Systems (Propane; Natural, Etc.)

C08

Codes; Standards; Ordinances

C09

Cold Storage; Refrigeration and Fast Freeze

G03

Geodetic Surveying: Ground and Air-borne

C10

Commercial Building (low rise) ; Shopping Centers

G04

Geographic Information System Services:
Development, Analysis, and Data Collection

C11

Community Facilities

C12

Communications Systems; TV; Microwave

G05

C13

Computer Facilities; Computer Service

Geospatial Data Conversion: Scanning,
Digitizing, Compilation, Attributing, Scribing,
Drafting

C14

Conservation and Resource Management

G06

Graphic Design

C15

Construction Management

C16

Construction Surveying

H01

C17

Corrosion Control; Cathodic Protection; Electrolysis

Harbors; Jetties; Piers, Ship Terminal
Facilities

C18

Cost Estimating; Cost Engineering and
Analysis; Parametric Costing; Forecasting

H02
H03

C19

Cryogenic Facilities

Hazardous Materials Handling and Storage
Hazardous, Toxic, Radioactive Waste
Remediation

D01

Dams (Concrete; Arch)

D02

Dams (Earth; Rock); Dikes; Levees

H04
H05
H06
H07

D03

Desalinization (Process & Facilities)

Heating; Ventilating; Air Conditioning
Health Systems Planning
Highrise; Air-Rights-Type Buildings
Highways; Streets; Airfield Paving; Parking
Lots

D04

Design-Build - Preparation of Requests for Proposals

D05

Digital Elevation and Terrain Model Development

D06

Digital Orthophotography

D07

Dining Halls; Clubs; Restaurants

H08
H09
H10
H11

Historical Preservation
Hospital & Medical Facilities
Hotels; Motels
Housing (Residential, Multi-Family;
Apartments; Condominiums)

D08

Dredging Studies and Design

H12
H13

Hydraulics & Pneumatics
Hydrographic Surveying

STANDARD FORM 330 (REV. 7/2021)
PAGE 6 OF INSTRUCTIONS

List of Experience Categories (Profile Codes continued)
Code
I01

Description
Industrial Buildings; Manufacturing Plants

Code
P09

Description
Product, Machine Equipment Design

I02

Industrial Processes; Quality Control

P10

Pneumatic Structures, Air-Support Buildings

I03

Industrial Waste Treatment

P11

Postal Facilities

I04

Intelligent Transportation Systems

P12

Power Generation, Transmission, Distribution

I05

Interior Design; Space Planning

I06

Irrigation; Drainage

P13

Public Safety Facilities

J01

Judicial and Courtroom Facilities

R01

Radar; Sonar; Radio & Radar Telescopes

R02

Radio Frequency Systems & Shieldings

L01

Laboratories; Medical Research Facilities

R03

Railroad; Rapid Transit

L02

Land Surveying

R04

Recreation Facilities (Parks, Marinas, Etc.)

L03

Landscape Architecture

R05

Refrigeration Plants/Systems

L04

Libraries; Museums; Galleries

R06

Rehabilitation (Buildings; Structures; Facilities)

L05

Lighting (Interior; Display; Theater, Etc.)

R07

Remote Sensing

L06

Lighting (Exteriors; Streets; Memorials;
Athletic Fields, Etc.)

R08

Research Facilities

R09

Resources Recovery; Recycling

M01

Mapping Location/Addressing Systems

R10

Risk Analysis

M02

Materials Handling Systems; Conveyors; Sorters

R11

Rivers; Canals; Waterways; Flood Control

M03

Metallurgy

R12

Roofing

M04

Microclimatology; Tropical Engineering

M05

Military Design Standards

S01

Safety Engineering; Accident Studies; OSHA
Studies

M06

Mining & Mineralogy

S02

Security Systems; Intruder & Smoke Detection

M07

Missile Facilities (Silos; Fuels; Transport)

S03

Seismic Designs & Studies

M08

Modular Systems Design; Pre-Fabricated Structures or
Components

S04

Sewage Collection, Treatment and Disposal

S05

Soils & Geologic Studies; Foundations

S06

Solar Energy Utilization

S07

Solid Wastes; Incineration; Landfill

N01

Naval Architecture; Off-Shore Platforms

N02

Navigation Structures; Locks

S08

Special Environments; Clean Rooms, Etc.

N03

Nuclear Facilities; Nuclear Shielding

S09

Structural Design; Special Structures

O01
O02
O03

Office Buildings; Industrial Parks
Oceanographic Engineering
Ordnance; Munitions; Special Weapons

S10

Surveying; Platting; Mapping; Flood
Plain Studies

S11

Sustainable Design

S12

Swimming Pools

S13

Storm Water Handling & Facilities

T01

Telephone Systems (Rural; Mobile; Intercom,
Etc.)

P01

Petroleum Exploration; Refining

P02

Petroleum and Fuel (Storage and Distribution)

P03

Photogrammetry

P04

Pipelines (Cross-Country - Liquid & Gas)

T02

Testing & Inspection Services

P05

Planning (Community, Regional, Areawide and State)

T03

Traffic & Transportation Engineering

P06

Planning (Site, Installation, and Project)

P07

Plumbing & Piping Design

P08

Prisons & Correctional Facilities

T04

Topographic Surveying and Mapping

T05

Towers (Self-Supporting & Guyed Systems)

T06

Tunnels & Subways

STANDARD FORM 330 (REV. 7/2021)
PAGE 7 OF INSTRUCTIONS

List of Experience Categories (Profile Codes continued)
Code
U01

Description
Unexploded Ordnance Remediation

U02

Urban Renewals; Community Development

U03

Utilities (Gas and Steam)

V01

Value Analysis; Life-Cycle Costing

W01

Warehouses & Depots

W02

Water Resources; Hydrology; Ground Water

W03

Water Supply; Treatment and Distribution

W04

Wind Tunnels; Research/Testing Facilities Design

Z01

Zoning; Land Use Studies

STANDARD FORM 330 (REV. 7/2021)
PAGE 8 OF INSTRUCTIONS

ARCHITECT-ENGINEER QUALIFICATIONS
PART I - CONTRACT-SPECIFIC QUALIFICATIONS
A. CONTRACT INFORMATION
1. TITLE AND LOCATION (City and State)
2. PUBLIC NOTICE DATE

3. SOLICITATION OR PROJECT NUMBER

B. ARCHITECT-ENGINEER POINT OF CONTACT
4. NAME AND TITLE
5. NAME OF FIRM
6. TELEPHONE NUMBER

7. FAX NUMBER

8. E-MAIL ADDRESS

C. PROPOSED TEAM
(Complete this section for the prime contractor and all key subcontractors.)
J-V
PARTNER
SUBCONTRACTOR

PRIME

(Check)
9. FIRM NAME

10. ADDRESS

11. ROLE IN THIS CONTRACT

a.
CHECK IF BRANCH OFFICE

b.
CHECK IF BRANCH OFFICE

c.
CHECK IF BRANCH OFFICE

d.
CHECK IF BRANCH OFFICE

e.
CHECK IF BRANCH OFFICE

f.
CHECK IF BRANCH OFFICE

D. ORGANIZATIONAL CHART OF PROPOSED TEAM
AUTHORIZED FOR LOCAL REPRODUCTION

(Attached)

STANDARD FORM 330 (REV. 7/2021)

E. RESUMES OF KEY PERSONNEL PROPOSED FOR THIS CONTRACT
(Complete one Section E for each key person.)
12. NAME

13. ROLE IN THIS CONTRACT

14. YEARS EXPERIENCE
a. TOTAL

b. WITH CURRENT FIRM

15. FIRM NAME AND LOCATION (City and State)
16. EDUCATION (Degree and Specialization)

17. CURRENT PROFESSIONAL REGISTRATION (State and Discipline)

18. OTHER PROFESSIONAL QUALIFICATIONS (Publications, Organizations, Training, Awards, etc.)

19. RELEVANT PROJECTS
(1) TITLE AND LOCATION (City and State)

(2) YEAR COMPLETED
PROFESSIONAL SERVICES CONSTRUCTION (If applicable)

(3) BRIEF DESCRIPTION (Brief scope, size, cost, etc.) AND SPECIFIC ROLE

(1) TITLE AND LOCATION (City and State)

Check if project performed with current firm

(2) YEAR COMPLETED
PROFESSIONAL SERVICES CONSTRUCTION (If applicable)

(3) BRIEF DESCRIPTION (Brief scope, size, cost, etc.) AND SPECIFIC ROLE

(1) TITLE AND LOCATION (City and State)

Check if project performed with current firm

(2) YEAR COMPLETED
PROFESSIONAL SERVICES CONSTRUCTION (If applicable)

(3) BRIEF DESCRIPTION (Brief scope, size, cost, etc.) AND SPECIFIC ROLE

(1) TITLE AND LOCATION (City and State)

Check if project performed with current firm

(2) YEAR COMPLETED
PROFESSIONAL SERVICES CONSTRUCTION (If applicable)

(3) BRIEF DESCRIPTION (Brief scope, size, cost, etc.) AND SPECIFIC ROLE

(1) TITLE AND LOCATION (City and State)

Check if project performed with current firm

(2) YEAR COMPLETED
PROFESSIONAL SERVICES CONSTRUCTION (If applicable)

(3) BRIEF DESCRIPTION (Brief scope, size, cost, etc.) AND SPECIFIC ROLE

Check if project performed with current firm

STANDARD FORM 330 (REV. 7/2021) PAGE 2

F. EXAMPLE PROJECTS WHICH BEST ILLUSTRATE PROPOSED TEAM'S
QUALIFICATIONS FOR THIS CONTRACT
(Present as many projects as requested by the agency, or 10 projects, if not specified.
Complete one Section F for each project.)

21. TITLE AND LOCATION (City and State)

20. EXAMPLE PROJECT KEY
NUMBER

22. YEAR COMPLETED

PROFESSIONAL SERVICES

CONSTRUCTION (If applicable)

23. PROJECT OWNER'S INFORMATION
a. PROJECT OWNER

b. POINT OF CONTACT NAME

c. POINT OF CONTACT TELEPHONE NUMBER

24. BRIEF DESCRIPTION OF PROJECT AND RELEVANCE TO THIS CONTRACT (Include scope, size, and cost)

25. FIRMS FROM SECTION C INVOLVED WITH THIS PROJECT
(1) FIRM NAME