8110-12 Application for Type Certificate, Production Certificate

Form Approved OMB No. 2120-0018
Expiration Date: November 30, 2023

INFORMATION FOR APPLICANT

Paperwork Reduction Act Statement:
A federal agency may not conduct or sponsor, and a person is not required to respond to, nor shall a person
be subject to a penalty for failure to comply with a collection of information subject to the requirements of the
Paperwork Reduction Act unless that collection of information displays a currently valid OMB Control
Number. The OMB Control Number for this information collection is 2120-0018. Public reporting for this
collection of information is estimated to be approximately 48 minutes per response, including the time for
reviewing instructions, searching existing data sources, gathering and maintaining the data needed,
completing and reviewing the collection of information. All responses to this collection of information are
required to obtain or retain benefits per 14 CFR Part 21. Send comments regarding this burden estimate or
any other aspect of this collection of information, including suggestions for reducing this burden to:
Information Collection Clearance Officer, Federal Aviation Administration, 10101 Hillwood Parkway, Fort
Worth, TX 76177-1524

APPLICATION FOR TYPE CERTIFICATE, PRODUCTION CERTIFICATE,
OR SUPPLEMENTAL TYPE CERTIFICATE
Privacy Act Statement

This statement gives you notice as required by 5 U.S.C. § 552a, as amended (the Privacy Act of 1974).
Authority: The authority for collecting this information on FAA Form 8110-12, Application for Type Certificate, Production
Certificate, or Supplemental Type Certificate is contained in 49 U.S.C. § 44103 as implemented by 14 CFR Part 21.
Purpose: The collected information is used to evaluate an applicant’s application for a Type Certificate, Production Certificate,
or Supplemental Type Certificate.
Routine Uses: The collected information will be included in the Privacy Act System of Records Notice DOT/FAA 801, Aircraft
Registration Records and will be disclosed pursuant to the published routine uses included in that notice. Some, but not all, of
the published routine uses are as follows:
1. To the public (including government entities, title companies, financial institutions, international organizations, and others),
when permitted, information, including aircraft owner’s name, address, United States Registration Number, aircraft type, legal
documents related to title or financing of an aircraft and ADB–S summary reports, in order to facilitate aviation safety, security,
and commerce. Emails and telephone numbers of small unmanned aircraft system (sUAS) owners registered under 14 CFR
part 48 will not be disclosed to the Public pursuant to this Routine Use.
2. To law enforcement, when necessary and relevant to an FAA enforcement activity.

3. To law enforcement, when necessary and relevant to an FAA enforcement activity.
4. To government agencies, whether Federal, State, Tribal, local or foreign, information necessary or relevant to an

investigation of a violation or potential violation of law, whether civil, criminal, or regulatory, that the agency is charged with
investigating or enforcing; as well as, to government agencies, whether Federal, State, or local responsible for threat detection
in connection with critical infrastructure protection.
Additional routine uses are listed in SORN DOT/FAA 801; please visit the SORN to review the full list of routine uses.
Disclosure: Submission of this information is voluntary, however failure to submit the requested information may result in a
delay in processing or denial of your request.
FAA Form 8110-12 (09/20) SUPERSEDES PREVIOUS EDITION

Form Approved OMB No. 2120-0018
Expiration Date: November 30, 2023

INSTRUCTIONS FOR COMPLETION OF FAA FORM 8110-12
APPLICATION FOR TC, AMENDED TC, PC, STC, OR AMENDED STC
FAA Form 8110-12 is used for application for a Type Certificate(TC), Amended TC, Production
Certificate(PC), Supplemental Type Certificate(STC), or Amended STC. Application for a TC and a
PC may be made at the same time if desired. Only the appropriate blocks, as follows, need to be filled
out for each type of certificate.
Blocks 1, 2, 3, 4, 5, 6, and 8 for a TC or Amended TC;
Blocks 1, 2, 3, 5, and 8 for a PC;
Blocks 1, 2, 3, 4, 7, and 8 for an STC or Amended STC.
Block 1. Enter the name of the party, corporation or organization to whom the TC, Amended TC, PC,
STC, or Amended STC will be issued. The name will appear on the certificate exactly as it is
entered here.
NOTE: The TC holder can either apply to amend the original TC or apply for an STC. If a
person is not the TC holder, that person must apply for an STC (Refer to 14 CFR 21.113).
Also, only STC holders can apply to amend their own STC.
Block 2. Check appropriate block.
Block 3. Check appropriate block.
Block 4. Enter the address of the party, corporation or organization to whom the TC, Amended TC, PC,
STC, or Amended STC will be issued.
NOTE: A post office box will not be accepted.
Block 5. Complete this block if application is for a TC or Amended TC. Leave blank if application is
for a PC, STC, or Amended STC. For Amended TC, give TC number at time of application.
Block 6. Complete parts a, b, c, d., and e. of this block if application is for a PC. Give PC number if
application is for an amendment to a PC. Leave blank if application is for an original PC. Give
TC/STC number if known at time of application, otherwise leave blank. Refer to 14 CFR §§
21.45 and 21.119.
NOTE: A PC is normally not required for production of parts for an STC, they are usually
manufactured under a PMA.
Block 7.

Complete this block if application is for an STC or Amended STC. For Amended STC, give
STC number at time of application. For One-only STCs, also complete Block 7.f.

Block 8.

Obtain the signature of the certifying official. The certifying official must be the holder or the
person duly authorized to sign for the holder, company, or corporation.

FAA Form 8110-12 (09/20) SUPERSEDES PREVIOUS EDITION

Form Approved OMB No. 2120-0018
Expiration Date: November 30, 2023

APPLICATION FOR TYPE CERTIFICATE,
PRODUCTION CERTIFICATE, OR
SUPPLEMENTAL TYPE CERTIFICATE

1. Name Of Applicant

2. Application made for :

3. Product Involved:

__ Type Certificate

__ Production Certificate

__ Aircraft

__ Supplemental Type Certificate

__ Amended Type Certificate

__ Engine

__ Amended Supplemental Type Certificate
4. Address

__ Propeller

City

State

Zip Code

5. TYPE CERTIFICATE (Complete item 5a) or AMENDED TYPE CERTIFICATE (Complete items 5a, 5b and 5c)
a.

Model designation(s) (All models listed are to be completely described in the required technical data, including drawings representing the design,
material, specifications, construction, and performance of the aircraft, aircraft engine, propeller which is the subject of this application.)

b.

Description of modification

c.

Existing Type Certificate No.

6. PRODUCTION CERTIFICATE (Complete items 6a-e below. Submit with this form, in manual form, one copy of quality control data or changes thereto
covering new products, as required by applicable CFR.)
a. Factory address (if different from above)

b. Application is for

d. P.C. No.

__New production certificate
__Additions to Existing Production Certificate
(Give P.C. No.) ___________

e. T.C./S.T.C. No.

c. Applicant is holder of or a licensee under a Type Certificate or a Supplemental Type Certificate
(Attach evidence of licensing agreement and give certificate number)
7. SUPPLEMENTAL TYPE CERTIFICATE (complete 7a, b, d-f) or AMENDED SUPPLEMENTAL TYPE CERTIFICATE (Complete items 7a-f below)
a. Make(s) and model designation(s) of product(s) to be modified
b. Description of modification

c. Existing Supplemental Type Certificate No (if applicable).
d. Will data be available for sale or release to other persons?
__ Yes
f. One-Only STC?

__ Yes

e. Will parts be manufactured for sale? (Ref. 14 CFR 21.303)

__ No
__ No,

__ Yes
If Yes, will type design be sufficient for reproducibility?

__ No
__ Yes

__ No

8. CERTIFICATION – I certify that the above statements are true.
Signature of certifying official

FAA Form 8110-12 (09/20) SUPERSEDES PREVIOUS EDITION

Title

Date

Page 1 of 1