THE OCCUPATIONAL EXPOSURE TO BERYLLIUM
IN GENERAL INDUSTRY (29 CFR 1910.1024)
OMB Control Number: 1218-0267
Expiration Date: March 31, 2025
SUPPORTING
STATEMENT FOR
THE INFORMATION COLLECTION REQUIREMENTS
IN
THE STANDARD FOR THE OCCUPATIONAL
EXPOSURE
TO BERYLLIUM IN GENERAL INDUSTRY (29 CFR 1910.1024)1
OMB CONTROL NUMBER 1218-0267 (June 2024)
The agency is seeking an extension of a previously approved data collection.
The main objective of the Occupational Safety and Health Act (“OSH Act” or “Act”) is to “assure so far as possible every working man and woman in the Nation safe and healthful working conditions and to preserve our human resources” (29 U.S.C. 651(a)). To achieve this objective, the OSH Act specifically authorizes “the development and promulgation of occupational safety and health standards” (29 U.S.C. 651(b)(9)). The Act further states that “[t]he Secretary . . . shall . . . prescribe such rules and regulations as [he/she] may deem necessary to carry out [his/her] responsibilities under this Act, including rules and regulations dealing with the inspection of an employer’s establishment” (29 U.S.C. 657(g)(2)).
To protect worker health, the OSH Act authorizes the Secretary of Labor (Secretary) to develop standards that provide for “monitoring or measuring employee exposure” to occupational hazards and “prescribe the type and frequency of medical examinations or other tests which shall be made available, by the employer or at [the employer’s] cost, to employees exposed to such hazards in order to most effectively determine whether the health of such employees is adversely affected by such exposure” (29 U.S.C. 655(b)(7)). Moreover, the Act directs the Secretary to “issue regulations requiring employers to maintain accurate records of employee exposures to potentially toxic materials or harmful physical agents which are required to be monitored or measured,” and further requires that such regulations provide “for each employee or former employee to have access to such records as will indicate [the employee’s] own exposure to toxic materials or harmful physical agents” as appropriate (29 U.S.C. 657(c)(3)). In addition, the OSH Act mandates that “[e]ach employer shall make, keep and preserve, and make available to the Secretary . . . such records regarding [his/her] activities relating to this Act as the Secretary . . . may prescribe by regulation as necessary or appropriate for the enforcement of this Act or for developing information regarding the causes and prevention of occupational accidents and illnesses” (29 U.S.C. 657(c)(1)).
Section 6(b)(7) of the Act, 29 U.S.C. 655(b)(7), further specifies that “[a]ny standard promulgated under this subsection shall prescribe the use of labels or other appropriate forms of warning as are necessary to ensure that employees are apprised of all hazards to which they are exposed, relevant symptoms and appropriate emergency treatment, and proper conditions and precautions of safe use or exposure.”
Under the authority granted by the OSH Act, the Secretary, through the Occupational Safety and Health Administration (“OSHA” or “the agency”) published a standard to protect workers from the occupational exposure to beryllium and beryllium compounds standard for general industry (29 CFR 1910.1024). Items 2 and 12 below describe in detail the specific information collection requirements of the Standard.
The following discussion provides detail on each collection of information requirement contained in the general industry standards for the occupational exposure to beryllium and beryllium compounds.
§ 1910.1024(d) -- Exposure Assessment
§ 1910.1024(d)(2) -- Performance Option.
(2) Performance option. The employer must assess the 8-hour time-weighted average (TWA) exposure and the 15-minute short-term exposure for each employee on the basis of any combination of air monitoring data and objective data sufficient to accurately characterize airborne exposure to beryllium.
Purpose: The general purposes of requiring an assessment of airborne exposure to beryllium include: determination of the extent and degree of exposure at the worksite; identification and prevention of employee overexposure; identification of the sources of exposure; collection of exposure data so that the employer can select the proper control methods to be used; and evaluation of the effectiveness of those selected methods. Assessment enables employers to meet their legal obligation to ensure that their employees are not exposed in excess of the permissible exposure limit (PEL) and to ensure employees have access to accurate information about their exposure levels, as required by section 8(c)(3) of the Act, 29 U.S.C. 657(c)(3). In addition, exposure data enables the physicians or other licensed health care professionals (PLHCP) performing medical examinations to be informed of the extent of occupational exposures.
The performance option is intended to allow employers flexibility in assessing the beryllium exposures of their employees. Under this option, the employer has the option to use any combination of objective data and air monitoring data. Where employers want a more structured approach for meeting their exposure assessment obligations, OSHA also provides the scheduled monitoring option. OSHA takes the burden for the exposure assessment collection of information under the scheduled option paragraph (d)(3).
§ 1910.1024(d)(3) -- Scheduled Monitoring Option.
Initial Monitoring:
§ 1910.1024(d)(3)(i), (ii) & (iii).
(i) The employer must perform initial monitoring to assess the 8-hour TWA exposure for each employee on the basis of one or more personal breathing zone air samples that reflect the airborne exposure of employees on each shift, for each job classification, and in each work area.
(ii) The employer must perform initial monitoring to assess the short-term exposure from 15-minute personal breathing zone air samples measured in operations that are likely to produce airborne exposure above the short-term exposure limit (STEL) for each work shift, for each job classification, and in each work area.
(iii) Where several employees perform the same tasks on the same shift and in the same work area, the employer may sample a representative fraction of these employees in order to meet the requirements of paragraph (d)(3). In representative sampling, the employer must sample the employee(s) expected to have the highest airborne exposure to beryllium.
Purpose: The purpose of initial exposure assessment is to determine the extent and degree of beryllium exposure at the worksite; identification and prevention of employee overexposure; identification of the sources of exposure to beryllium; collection of exposure data so that the employer can select the proper control methods to be used; and evaluation of the effectiveness of those selected methods. Exposure assessment enables employers to meet their legal obligation to ensure that their employees are not exposed to beryllium in excess of the permissible exposure limits and to notify employees of their exposure levels, including any overexposures as required by section 8(c)(3) of the Act (29 U.S.C. § 657(c)(3)). In addition, the availability of exposure data enables physicians or other PLHCPs performing medical examinations to be informed of the extent of an employee’s occupational exposures.
Periodic Monitoring:
§ 1910.1024(d)(3)(v), (vi), (vii) & (viii).
(v) Where the most recent exposure monitoring indicates that airborne exposure is at or above the action level but at or below the TWA permissible exposure limit (PEL), the employer must repeat such monitoring within six months of the most recent monitoring.
(vi) Where the most recent exposure monitoring indicates that airborne exposure is above the TWA PEL, the employer must repeat such monitoring within three months of the most recent 8-hour TWA exposure monitoring.
(vii) Where the most recent (non-initial) exposure monitoring indicates that airborne exposure is below the action level, the employer must repeat such monitoring within six months of the most recent monitoring until two consecutive measurements, taken seven or more days apart, are below the action level, at which time the employer may discontinue 8-hour TWA exposure monitoring for those employees whose exposure is represented by such monitoring, except as otherwise provided in paragraph (d)(4) of this standard.
(viii) Where the most recent exposure monitoring indicates that airborne exposure is above the STEL, the employer must repeat such monitoring within three months of the most recent short-term exposure monitoring until two consecutive measurements, taken seven or more days apart, are below the STEL, at which time the employer may discontinue short-term exposure monitoring for those employees whose exposure is represented by such monitoring, except as otherwise provided in paragraph (d)(4) of this standard.
Purpose: OSHA recognizes that exposures in the workplace may fluctuate. Periodic monitoring helps employers identify changes in the workplace that influence exposures, and helps employers ensure that workers do not experience exposures that are higher than expected. Periodic monitoring also facilitates the identification and use of additional control measures where necessary. In addition, periodic monitoring reminds workers and employers of the continued need to protect against the hazards associated with beryllium exposure. The standard allows for employers to discontinue monitoring under certain circumstances.
§ 1910.1024(d)(4) -- Reassessment of Exposure.
(4) The employer must reassess airborne exposure whenever a change in the production, process, control equipment, personnel, or work practices may reasonably be expected to result in new or additional airborne exposure at or above the action level or STEL, or when the employer has any reason to believe that new or additional airborne exposure at or above the action level or STEL has occurred.
Purpose: The additional assessments required under this subsection are necessary to ensure that the exposure monitoring accurately represents existing exposure conditions. The exposure information gained from such assessments will enable the employer to take appropriate action to protect exposed workers. On the other hand, additional monitoring is not required simply because a change occurs, if the change could not reasonably be expected to result in new or additional exposures to beryllium.
§ 1910.1024(d)(6)(i) & (ii) -- Employee Notification of Assessment Results.
(i) Within 15 working days after completing an exposure assessment in accordance with paragraph (d) of this standard, the employer must notify each employee whose airborne exposure is represented by the assessment of the results of that assessment individually in writing or post the results in an appropriate location that is accessible to each of these employees.
(ii) Whenever an exposure assessment indicates that airborne exposure is above the TWA PEL or STEL, the employer must describe in the written notification the corrective action being taken to reduce airborne exposure to or below the exposure limit(s) exceeded where feasible corrective action exists but had not been implemented when the monitoring was conducted.
Purpose: Notifying workers of their exposures allows them to know if the employer is required to make medical surveillance available to them, as well as whether the standard requires them to wear respiratory protection and/or personal protective clothing and equipment. Notification can also permit and encourage workers to be more proactive in working safely to control their own exposures through better work practices and more active participation in safety programs. The time allowed for notification is consistent with the harmonized notification times established for a number of health standards applicable to general industry.
§ 1910.1024(e)(2)(i) & (ii) -- Demarcation of Beryllium Work Areas and Regulated Areas.
(2) Demarcation. (i) The employer must identify each beryllium work area through signs or any other methods that adequately establish and inform each employee of the boundaries of each beryllium work area.
(ii) The employer must identify each regulated area in accordance with paragraph (m)(2) of this standard.
Purpose: The purpose of a beryllium work area is to inform employees and other persons of the potential presence of airborne beryllium; to control access to these areas; and in conjunction with other provisions such as the written control plan, hygiene, and housekeeping requirements, to minimize the transfer of beryllium to other areas of the facility and reduce the potential for exposure to other employees. The purpose of a regulated area is to ensure that the employer makes workers aware of the presence of beryllium at levels above the PEL, to limit exposure to as few workers as possible, and to remind employees that personal protective equipment (PPE) is required. Establishing a regulated area can help to minimize exposure to workers not directly involved in operations that generate beryllium.
OSHA is not taking burden hours or costs under Items 12 and 13 of this Supporting Statement for the requirement in paragraph (e)(2)(i) to demarcate beryllium work areas. The beryllium work area requirement is performance oriented, allowing the employer to choose how to establish boundaries for each beryllium work area and restrict access. Because the employer may comply with this provision through the use of barriers or other forms of demarcation, rather than through signage, OSHA does not consider this requirement to be a collection of information under 5 CFR 132(c)(2) (“Controlling paperwork burden on the public”).
OSHA is also not taking burden hours or costs under Items 12 and 13 of this Supporting Statement for the requirement in paragraph (e)(2)(ii) to identify regulated areas in accordance with paragraph (m)(2). As explained in the discussion of paragraph (m) below, paragraph (m)(2), which requires the posting of a sign to warn employees of the presence of beryllium, requires specific language provided by the agency in the standard. Because paragraph (m)(3), and by extension paragraph (e)(ii)(2), provides specific language for the required warning, it is not a collection of information under 5 CFR 1320.3(c)(2) (“Controlling paperwork burden on the public”) and the agency is exempted from taking burden hours and costs of this provision.
§ 1910.1024(f)(1)(i), (ii), & (iii) -- Methods of Compliance -- Written Exposure Control Plan.
(i) The employer must establish, implement, and maintain a written exposure control plan, which must contain:
(A) A list of operations and job titles reasonably expected to involve airborne exposure to or dermal contact with beryllium;
(B) A list of operations and job titles reasonably expected to involve airborne exposure at or above the action level;
(C) A list of operations and job titles reasonably expected to involve airborne exposure above the TWA PEL or STEL;
(D) Procedures for minimizing cross-contamination, including the transfer of beryllium between surfaces, equipment, clothing, materials, and articles within beryllium work areas;
(E) Procedures for keeping surfaces as free as practicable of beryllium;
(F) Procedures for minimizing the migration of beryllium from beryllium work areas to other locations within or outside the workplace;
(G) A list of engineering controls, work practices, and respiratory protection required by paragraph (f)(2) of this standard;
(H) A list of personal protective clothing and equipment required by paragraph (h) of this standard; and
(I) Procedures for removing, laundering, storing, cleaning, repairing, and disposing of beryllium-contaminated personal protective clothing and equipment, including respirators.
(ii) The employer must review and evaluate the effectiveness of each written exposure control plan at least annually and update it, as necessary, when:
(A) Any change in production processes, materials, equipment, personnel, work practices, or control methods results, or can reasonably be expected to result, in new or additional airborne exposure to beryllium;
(B) The employer is notified that an employee is eligible for medical removal in accordance with paragraph (l)(1) of this standard for evaluation at a CBD diagnostic center, or shows signs or symptoms associated with exposure to beryllium; or
(C) The employer has any reason to believe that new or additional airborne exposure is occurring or will occur.
(iii) The employer must make a copy of the written exposure control plan accessible to each employee who is, or can reasonably be expected to be, exposed to airborne beryllium in accordance with OSHA’s Access to Employee Exposure and Medical Records (Records Access) standard (29 CFR 1910.1020(e)).
Purpose:
Paragraph (f)(1)(i): Written exposure control plans are instrumental in ensuring that employers comprehensively and consistently protect employees exposed to beryllium. Requiring employers to articulate conditions resulting in exposure and how those exposures will be controlled will help to ensure that they have a complete understanding of the controls needed to comply with the standard. Even in cases where employees are well trained, the written plan can help to ensure that controls are consistently used and become part of employees’ routine skill sets. Employers can also use the plans to ensure that maintenance checks are routinely performed, and optimal conditions are maintained. In addition, written exposure control plans are a useful method for communicating protections to employees.
Paragraph (f)(1)(ii): The written exposure control plan needs to be periodically reviewed and, if needed, updated because work conditions can change (e.g., the employer purchases a new type of equipment). A yearly review is needed to ensure that all current scenarios are captured in the plan.
Paragraph (f)(1)(iii): Requiring the written exposure control plan to be accessible also serves an important purpose. Written exposure control plans are effective methods for communicating protections to employees. Making the written plan accessible empowers and protects employees by providing them with written information about sources of exposure, controls, and personal protective clothing and equipment, as well as certain other procedures to minimize employee exposure.
§ 1910.1024(g)(2) -- Respiratory Protection Program.
(2) Respiratory protection program. Where this standard requires an employer to provide respiratory protection, the selection and use of such respiratory protection must be in accordance with the Respiratory Protection standard (29 CFR 1910.134).
Purpose: The respiratory protection program ensures that respirators are properly used in the workplace and are effective in protecting employees. As required under 29 CFR 1910.134(c)(1), employers providing employees with respiratory protection pursuant to the beryllium standard must establish a written respiratory protection program. This written program must include: procedures for selecting respirators for use in the workplace; medical evaluations of employees required to use respirators; fit-testing procedures for tight-fitting respirators; procedures for proper use of respirators in routine and reasonably foreseeable emergency situations; procedures and schedules for maintaining respirators; procedures to ensure adequate quality, quantity, and flow of breathing air for atmosphere-supplying respirators; training of employees in respiratory hazards to which they might be exposed and the proper use of respirators; and procedures for evaluating the effectiveness of the program.
§ 1910.1024(h)(2)(v) -- Personal Protective Clothing and Equipment -- Removal and Storage.
(v) When personal protective clothing or equipment required by this standard is removed from the workplace for laundering, cleaning, maintenance, or disposal, the employer must ensure that personal protective clothing and equipment are stored and transported in sealed bags or other closed containers that are impermeable and are labeled in accordance with paragraph (m)(3) of this standard and the Hazard Communication standard (HCS) (29 CFR 1910.1200).
Purpose: This provision is intended to reduce exposure to beryllium for employees handling beryllium-contaminated materials by requiring these materials to be stored in sealed bags or other closed containers, and by informing those handling the containers that they contain beryllium through labels describing the potentially harmful effects of beryllium exposure.
OSHA has determined the labeling requirement in paragraph (m)(3) is not a collection of information because the standard provides specific language for the labels. Information originally supplied by the Federal government to employers for the purpose of disclosing information to employees is excluded from the definition of a “collection of information.” (5 CFR 1320.3(c)(2), “Controlling paperwork burden on the public”).
§ 1910.1024(h)(3)(iii) -- Personal Protective Clothing and Equipment -- Cleaning and Replacement.
(3)(iii) The employer must inform in writing the persons or the business entities who launder, clean, or repair the personal protective clothing or equipment required by this standard of the potentially harmful effects of exposure to beryllium and that the personal protective clothing and equipment must be handled in accordance with this standard.
Purpose: This provision is intended reduce exposure to beryllium for employees handling beryllium-contaminated materials by providing employers and employees handling these materials the information necessary to protect employees from beryllium exposure.
§ 1910.1024(j)(3)(i) - (iii) -- Housekeeping – Disposal, Recycling, and Reuse.
(3) Disposal, recycling, and reuse:
(i) Except for intra-plant transfers, when the employer transfers materials that contain at least 0.1 percent beryllium by weight or are contaminated with beryllium for disposal, recycling, or reuse, the employer must label the materials in accordance with paragraph (m)(3) of this standard;
(ii) Except for intra-plant transfers, materials designated for disposal that contain at least 0.1 percent beryllium by weight or are contaminated with beryllium must be cleaned to be as free as practicable of beryllium or placed in enclosure that prevent the release of beryllium-containing particulate or solutions under normal conditions of use, storage, or transport, such as bags or containers; and
(iii) Except for intra-plant transfers, materials designated for recycling or reuse
that contain at least 0.1 percent beryllium by weight or are contaminated with beryllium must.
be cleaned to be as free as practicable of beryllium or placed in enclosures that prevent the release of beryllium-containing particulate or solutions under normal conditions of use, storage, or transport, such as bags or containers.
Purpose: This provision is intended to reduce exposure to beryllium for employees handling beryllium-contaminated materials by requiring these materials to be stored in sealed containers and warn employers and employees handling the containers of the potentially harmful effects of the beryllium inside those containers to facilitate proper handling and disposal of that material.
OSHA is not taking burden hours or costs for the housekeeping provisions under Items 12 or 13 of this Supporting Statement. Because paragraph (m)(3) provides specific language for the required warning, they are not collections of information under 5 CFR 1320.3(c)(2) (“Controlling paperwork burden on the public”) and the agency is exempted from taking burden hours and costs of this provision.
§ 1910.1024(k)(1), (2), & (3) -- Medical Surveillance.
(1) General.
(i) The employer must make medical surveillance required by this paragraph available at no cost to the employee, and at a reasonable time and place, to each employee:
(A) Who is or is reasonably expected to be exposed at or above the action level for more than 30 days per year;
(B) Who shows signs or symptoms of CBD or other beryllium-related health effects;
(C) Who is exposed to beryllium during an emergency; or
(D) Whose most recent written medical opinion required by paragraph (k)(6) or (k)(7) of this standard recommends periodic medical surveillance.
(ii) The employer must ensure that all medical examinations and procedures required by this standard are performed by, or under the direction of, a licensed physician.
(2) Frequency.
The employer must provide a medical examination:
(i) Within 30 days after determining that:
(A) An employee meets the criteria of paragraph (k)(1)(i)(A), unless the employee has received a medical examination, provided in accordance with this standard, within the last two years; or
(B) An employee meets the criteria of paragraph (k)(1)(i)(B).
(ii) At least every two years thereafter for each employee who continues to meet the criteria of paragraph (k)(1)(i)(A), (B), or (D) of this standard.
(iii) At the termination of employment for each employee who meets any of the criteria of paragraph (k)(1)(i) of this standard at the time the employee’s employment terminates, unless an examination has been provided in accordance with this standard during the six months prior to the date of termination. Each employee who meets the criteria of paragraph (k)(1)(i)(C) and who has not received an examination since exposure to beryllium during the emergency must be provided an examination at the time the employee's employment terminates.
(iv) For an employee who meets the criteria of paragraph (k)(1)(i)(C):
If that employee has not received a medical examination within the previous two years pursuant to paragraph (k)(1)(i), then within 30 days after the employee meets the criteria of paragraph (k)(1)(i)(C); or
If that employee has received a medical examination within the previous two years pursuant to paragraph (k)(1)(i), then at least one year but no more than two years after the employee meets the criteria of paragraph (k)(1)(i)(C).
(3) Contents of examination.
(i) The employer must ensure that the PLHCP conducting the examination advises the employee of the risks and benefits of participating in the medical surveillance program and the employee’s right to opt out of any or all parts of the medical examination.
(ii) The employer must ensure that the employee is offered a medical examination that includes:
(A) A medical and work history, with emphasis on past and present airborne exposure to or dermal contact with beryllium, smoking history, and any history of respiratory system dysfunction;
(B) A physical examination with emphasis on the respiratory system;
(C) A physical examination for skin rashes;
(D) Pulmonary function tests, performed in accordance with the guidelines established by the American Thoracic Society including forced vital capacity (FVC) and forced expiratory volume in one second (FEV1);
(E) A standardized BeLPT or equivalent test, upon the first examination and at least every two years thereafter, unless the employee is confirmed positive. If the results of the BeLPT are other than normal, a follow-up BeLPT must be offered within 30 days, unless the employee has been confirmed positive. Samples must be analyzed in a laboratory certified under the College of American Pathologists/Clinical Laboratory Improvement Amendments guidelines to perform the BeLPT.
(F) A low dose computed tomography scan, when recommended by the PLHCP after considering the employee’s history of exposure to beryllium along with other risk factors, such as smoking history, family medical history, sex, age, and presence of existing lung disease; and
(G) Any other test deemed appropriate by the PLHCP.
Purpose: The general purposes of the medical surveillance provisions for beryllium include: to determine, when reasonably possible, if an individual worker is at increased risk for adverse health effects with continued exposure to beryllium; to identify beryllium-related adverse health effects for the purpose of taking appropriate intervention measures; and to determine workers’ fitness to use personal protective equipment, such as respirators. The inclusion of medical surveillance requirements in the general industry standard is consistent with Section 6(b)(7) of the OSH Act (29 U.S.C. 655(b)(7)), which requires that, when appropriate, OSHA include medical surveillance programs in its standards to determine whether exposure to the hazard addressed by the standard adversely affects the health of workers. Nearly all of OSHA’s health standards include medical surveillance requirements.
The initial medical examination serves to identify workers who have beryllium-related medical diseases or other health problems that additional beryllium exposure may exacerbate. The requirement that employers offer employees a medical examination within 30 days after determining that the employee is or is reasonably expected to be exposed at or above the action level for more than 30 days a year would help employers determine if an employee will be able to work in the job involving beryllium exposure without increased risk of adverse health effects.
The requirement to offer an examination to employees who show signs or symptoms of CBD or other beryllium-related health effects is necessary because the risk of material impairment of health remains significant at the action level. Consequently, even employees exposed at the action level for fewer than 30 days in a year may be at risk of developing CBD and other beryllium-related diseases and adverse health effects. In addition, beryllium sensitization and CBD could develop in employees who are especially sensitive to beryllium, may have been unknowingly exposed, or may have been exposed to greater amounts than the exposure assessment suggests. By requiring covered employers to make a medical exam available when an employee exhibits signs or symptoms, the standard protects all employees who may have developed CBD, including employees who have been exposed to beryllium for less than 30 days a year above the action level.
The requirement to offer an examination to employees whose most recent written medical opinion recommends periodic medical surveillance is critical to ensure the evaluation of those workers who have been identified by a PLHCP as in need of further evaluation but may not otherwise meet a trigger for medical surveillance under paragraphs (k)(1)(i)(A), (B) or (C).
The requirement to offer a medical examination at least every two years after the initial examination to employees who continue to meet the criteria is intended to facilitate the detection of health effects at an early stage so that interventions can be taken to improve health. The requirement to offer an examination at termination under the specified circumstances is intended to ensure that no employee terminates employment while carrying a detectable, but undiagnosed, health condition related to beryllium exposure.
The specified contents of the examination are those that are necessary for the PLHCP to opine on any recommended limitations on the employee's use of respirators, protective clothing, or equipment or on the employee's airborne exposure to beryllium and whether the employee has any detected medical condition, such as CBD or beryllium sensitization, or any medical conditions related to airborne exposure that require further evaluation or treatment. The provision for “any other tests deemed appropriate” gives the examining PLHCP the flexibility to determine additional tests that are medically necessary and related to beryllium exposure. This flexibility is needed because there are no tests beyond those listed in paragraphs (k)(3)(ii)(A)–(E) that are necessarily applicable to all employees covered by the medical surveillance requirement.
§ 1910.1024(k)(4) -- Medical Surveillance -- Information Provided to the PLHCP.
(4) The employer must ensure that the examining PLHCP (and the agreed-upon CBD diagnostic center, if an evaluation is required under paragraph (k)(7) of this standard) has a copy of this standard and must provide the following information, if known:
(i) A description of the employee’s former and current duties that relate to the employee’s airborne exposure to and dermal contact with beryllium;
(ii) The employee’s former and current levels of airborne exposure;
(iii) A description of any personal protective clothing and equipment, including respirators, used by the employee, including when and for how long the employee has used that personal protective clothing and equipment; and
(iv) Information from records of employment-related medical examinations previously provided to the employee, currently within the control of the employer, after obtaining written consent from the employee.
Purpose: This information required to be provided to the PLHCP and, when applicable, the CBD diagnostic center, will help the PLHCP and CBD diagnostic center evaluate employees’ health as it relates to their assigned duties and fitness to use personal protective equipment, including respirators, when needed. Providing the PLHCP and CBD diagnostic center with exposure monitoring results, as required under paragraph (k)(4)(ii), will assist them in determining if an employee is likely to be at risk of adverse effects from airborne beryllium exposure at work. A well-documented exposure history will also assist the PLCHP in determining if a condition may be related to beryllium exposure.
§ 1910.1024(k)(5)(i), (ii), & (iii) -- Medical Surveillance -- Licensed Physician’s Written Medical Report for the Employee.
(5) The employer must ensure that the employee receives a written medical report from the licensed physician within 45 days of the examination (including any follow-up BeLPT required under paragraph (k)(3)(ii)(E) of this standard) and that the PLHCP explains the results of the examination to the employee. The written medical report must contain:
(i) A statement indicating the results of the medical examination, including the licensed physician’s opinion as to whether the employee has:
(A) Any detected medical condition, such as CBD or beryllium sensitization (i.e., the employee is confirmed positive, as defined in paragraph (b) of this standard), that may place the employee at increased risk from further airborne exposure, and
(B) Any medical conditions related to airborne exposure that require further evaluation or treatment.
(ii) Any recommendations on:
(A) The employee’s use of respirators, protective clothing, or equipment; or
(B) Limitations on the employee's airborne exposure to beryllium.
(iii) If the employee is confirmed positive or diagnosed with CBD or if the licensed physician otherwise deems it appropriate, the written report must also contain a referral for an evaluation at a CBD diagnostic center.
(iv) If the employee is confirmed positive or diagnosed with CBD the written report must also contain a recommendation for continued periodic medical surveillance.
(v) If the employee is confirmed positive or diagnosed with CBD the written report must also contain a recommendation for medical removal from airborne exposure to beryllium, as described in paragraph (l) of this standard.
Purpose: The standard requires that only the employee receive a written medical report that includes detailed medical information. By providing the licensed physician’s written medical report to employees, those who might be at increased risk of health impairment from airborne beryllium exposure will be able to consider interventions (i.e., health management strategies) with guidance from the licensed physician. Such strategies might include employment choices to limit airborne exposures or to use a respirator for additional protection.
The requirement for a written medical report ensures that the employee receives a record of all findings. Employees will also be able to provide the written medical report to future health care providers.
The preparation of the report is accounted for under Item 12, cost to the employer for an employee's medical examination.
§ 1910.1024(k)(6) -- Medical Surveillance -- Licensed Physician’s Written Medical Opinion for the Employer.
(i) The employer must obtain a written medical opinion from the licensed physician within 45 days of the medical examination (including any follow-up BeLPT required under paragraph (k)(3)(ii)(E) of this standard). The written medical opinion must contain only the following:
(A) The date of the examination;
(B) A statement that the examination has met the requirements of this standard;
(C) Any recommended limitations on the employee’s use of respirators, protective clothing, or equipment; and
(D) A statement that the PLHCP has explained the results of the medical examination to the employee, including any tests conducted, any medical conditions related to airborne exposure that require further evaluation or treatment, and any special provisions for use of personal protective clothing or equipment;
(ii) If the employee provides written authorization, the written opinion must also contain any recommended limitations on the employee’s airborne exposure to beryllium.
(iii) If the employee is confirmed positive or diagnosed with CBD or if the licensed physician otherwise deems it appropriate, and the employee provides written authorization, the written opinion must also contain a referral for an evaluation at a CBD diagnostic center.
(iv) If the employee is confirmed positive or diagnosed with CBD and the employee provides written authorization, the written opinion must also contain a recommendation for continued periodic medical surveillance.
(v) If the employee is confirmed positive or diagnosed with CBD and the employee provides written authorization, the written opinion must also contain a recommendation for medical removal from airborne exposure to beryllium, as described in paragraph (l) of this standard.
(vi) The employer must ensure that each employee receives a copy of the written medical opinion described in paragraph (k)(6) of this standard within 45 days of any medical examination (including any follow-up BeLPT required under paragraph (k)(3)(ii)(E) of this standard) performed for that employee.
Purpose: The written medical opinion in the general industry standard contains information that allows employers to protect employee health, such as recommended limitations on the employee’s use of respirators, while at the same time protecting employee privacy as much as possible by allowing certain information to be included only with the employee’s written authorization. The date of the examination and a statement about the examination meeting the requirements of this standard are also included to provide the employer with evidence that compliance with the medical surveillance requirements are current.
The employer must obtain the written opinion within 45 days of the examination. OSHA believes this requirement will provide the licensed physician sufficient time to receive and consider the results of any tests included in the examination, including a follow-up BeLPT, and allow the employer to take any necessary protective measures in a timely manner. The requirement that the opinion be in written form ensures that employers and workers have the benefit of this information. The standard requires the employer to ensure that the worker gets a copy of the licensed physician’s written medical opinion within 45 days of the medical examination. This will allow workers to present it as proof of a current medical examination to future employers.
§ 1910.1024(k)(7) -- Medical Surveillance -- Referral to the CBD Diagnostic Center.
(7) CBD diagnostic center.
(i) The employer must provide an evaluation at no cost to the employee at a CBD diagnostic center that is mutually agreed upon by the employer and the employee. The evaluation at the CBD diagnostic center must be scheduled within 30 days, and must occur within a reasonable time, of:
(A) The employer’s receipt of a physician’s written medical opinion to the employer that recommends referral to a CBD diagnostic center; or
(B) The employee presenting to the employer a physician’s written medical report indicating that the employee has been confirmed positive or diagnosed with CBD, or recommending referral to a CBD diagnostic center.
(ii) The evaluation must include any tests deemed appropriate by the examining physician at the CBD diagnostic center, such as pulmonary function testing (as outlined by the American Thoracic Society criteria), bronchoalveolar lavage (BAL), and transbronchial biopsy. If any of the tests deemed appropriate by the examining physician are not available at the CBD diagnostic center, they may be performed at another location that is mutually agreed upon by the employer and the employee.
(iii) The employer must ensure that the employee receives a written medical report from the CBD diagnostic center that contains all the information required in paragraph (k)(5)(i), (ii), (iv), and (v) of this standard and that the PLHCP explains the results of the examination to the employee within 30 days of the examination.
(iv) The employer must obtain a written medical opinion from the CBD diagnostic center within 30 days of the medical examination. The written medical opinion must contain only the information in paragraph (k)(6)(i), as applicable, unless the employee provides written authorization to release additional information. If the employee provides written authorization, the written opinion must also contain the information from paragraphs (k)(6)(ii), (iv), and (v), if applicable.
(v) The employer must ensure that each employee receives a copy of the written medical opinion from the CBD diagnostic center described in paragraph (k)(7) of this standard within 30 days of any medical examination performed for that employee.
(vi) After an employee has received the initial clinical evaluation at a CBD diagnostic center described in paragraphs (k)(7)(i) and (ii) of this standard, the employee may choose to have any subsequent medical examinations for which the employee is eligible under paragraph (k) of this standard performed at a CBD diagnostic center mutually agreed upon by the employer and the employee, and the employer must provide such examinations at no cost to the employee.
Purpose: The referral to the CBD diagnostic center for additional medical examination serves to identify workers who have beryllium-related medical disorders or other health problems that could be exacerbated by additional beryllium exposure.
Evaluation at a CBD diagnostic center allows employees who are confirmed positive or diagnosed with CBD to receive specialized evaluation to determine the appropriate tests to monitor for possible progression from sensitization to CBD and to monitor the progression of CBD if it does occur. The requirements in (k)(7)(iii), (iv), and (v) regarding the written medical report and written medical opinion serve the purposes described above in the discussions of (k)(5) and (k)(6). The referral will also help to determine if that employee will be able to work in the job involving beryllium exposure without increased risk of adverse health effects.
The requirement is consistent with Section 6(b)(7) of the OSH Act (29 U.S.C. 655(b)(7)), which requires that, when appropriate, OSHA include medical surveillance programs in its standards to determine whether exposure to the hazard addressed by the standard adversely affects the health of workers.
§ 1910.1024(l)(1) & (l)(2) -- Medical Removal.
(1) An employee is eligible for medical removal, if the employee works in a job with airborne exposure at or above the action level and either:
(i) The employee provides the employer with:
(A) A written medical report indicating a confirmed positive finding or CBD diagnosis; or
(B) A written medical report recommending removal from airborne exposure to beryllium in accordance with paragraph (k)(5)(v) or (k)(7)(iii) of this standard; or
(ii) The employer receives a written medical opinion recommending removal from airborne exposure to beryllium in accordance with paragraph (k)(6)(v) or (k)(7)(iv) of this standard.
(2) If an employee is eligible for medical removal, the employer must provide the employee with the employee’s choice of:
(i) Removal as described in paragraph (l)(3) of this standard; or
(ii) Remaining in a job with airborne exposure at or above the action level, provided that the employer provides, and ensures that the employee uses, respiratory protection that complies with paragraph (g) of this standard whenever airborne exposures are at or above the action level.
Purpose: Medical removal, generally, serves three main purposes. First, it increases employee participation and confidence in the standard's medical surveillance program. Second, by requiring the employer to remove employees with the highest risk of suffering material impairment of health (if the employee chooses removal), medical removal may benefit sensitized employees and those with CBD. Finally, medical removal may provide employers with an additional incentive to keep employee exposures low.
The purpose of the provisions in paragraphs (l)(1) and (l)(2) is to provide an option for medical removal of workers in jobs with airborne exposure to beryllium at or above the action level and who are diagnosed with CBD, confirmed positive, or otherwise recommended for removal by a physician in accordance with paragraph (k)(5)(v), (k)(6)(v), (k)(7)(iii), or (k)(7)(iv) of this standard. By making employees eligible for removal when a written medical report indicates a confirmed positive finding or CBD diagnosis or recommends removal from airborne exposure to beryllium based on a CBD diagnosis or a confirmed positive finding, the standard offers protection to employees who could benefit from such removal. The same protection is offered to employees for whom the written medical opinion contains, with their authorization, a recommendation for medical removal in accordance with paragraph (k)(6)(v) or (k)(7)(iv). The medical removal provision is structured to allow the employee to retain discretion over whether the employer is informed of the employee’s illness or diagnosis, so the purpose of the requirement for the employer’s receipt of documentation is to trigger the removal requirements while ensuring the employer has notice and maintaining the employee’s privacy.
§ 1910.1024(m)(1) -- Communication of Hazards.
(1) General.
(i) Chemical manufacturers, importers, distributors, and employers must comply with all requirements of the HCS (29 CFR 1910.1200) for beryllium.
*****
(iii) Employers must include beryllium in the hazard communication program established to comply with the HCS. Employers must ensure that each employee has access to labels on containers of beryllium and to safety data sheets, and is trained in accordance with the requirements of the HCS (29 CFR 1910.1200) and paragraph (m)(4) of this standard.2
Purpose: The purpose of ensuring that each employee has training and access to labels and safety data sheets is to enable workers to take the precautions necessary to implement special practices to prevent or reduce beryllium exposure. Requirements that employers provide training to workers, both in paragraph (m)(1)(iii) and elsewhere, such as in paragraph (m)(3), are not collections of information.
§ 1910.1024(m)(2) – Warning Signs
(2) Warning signs.
(i) Posting. The employer must provide and display warning signs at each approach to a regulated area so that each employee is able to read and understand the signs and take necessary protective steps before entering the area.
(ii) Sign specification.
(A) The employer must ensure that the warning signs required by paragraph (m)(2)(i) of this standard are legible and readily visible.
(B) The employer must ensure each warning sign required by paragraph (m)(2)(i) of this standard bears the following legend:
DANGER
REGULATED AREA
BERYLLIUM
MAY CAUSE CANCER
CAUSES DAMAGE TO LUNGS
AUTHORIZED PERSONNEL ONLY
WEAR RESPIRATORY PROTECTION AND PROTECTIVE CLOTHING AND EQUIPMENT IN THIS AREA
Purpose: Posting warning signs informs workers that they are entering a regulated area, and that they must have proper authorization before entering such an area. Warning signs allow workers and others to take the precautions necessary to avoid harmful beryllium exposures.
Under PRA, information originally supplied by the Federal government to the recipient for the purpose of disclosure of information originally supplied by the Federal government to the employer for the purpose of disclosure to the public is not considered to be a collection of information (5 CFR 1320.3(c)(2)). The agency has determined that the warning signs required by paragraph (m)(2) is not a collection of information. Therefore, OSHA is taking no burden hours or cost for this requirement.
§ 1910.1024(m)(3) – Warning labels
(3) Warning labels. Consistent with the HCS (29 CFR 1910.1200), the employer must label each immediate container of clothing, equipment, and materials contaminated with beryllium, and must, at a minimum, include the following on the label:
DANGER
CONTAINS BERYLLIUM
MAY CAUSE CANCER
CAUSES DAMAGE TO LUNGS
AVOID CREATING DUST
DO NOT GET ON SKIN
Purpose: Warning labels inform workers and downstream employers of the hazards associated with beryllium, and that they may need to implement special practices to prevent or reduce beryllium exposure. Furthermore, the labels alert downstream employers that they may have an obligation to protect their workers under the standard.
Under PRA, information originally supplied by the Federal government to the employer for the purpose of disclosure to the public is not considered to be a collection of information (5 CFR 1320.3(c)(2)). The agency has determined that the warning labels required by paragraph (m)(3) is not a collection of information. Therefore, OSHA is taking no burden hours or cost for this requirement.
§ 1910.1024(m)(4)(iv) – Employee Information
(iv) Employee Information. The employer must make a copy of this standard and its appendices readily available at no cost to each employee and designated employee representative(s).
Purpose: The purpose of the requirement to make a copy of the standard available to employees is to ensure that employees are aware of their employer’s obligations under the standard and to assist employees in recognizing, and protecting against, the hazards of beryllium. OSHA considers the requirement to make a copy of the standard and its appendices available to workers to be a public disclosure of information originally supplied by the Federal government to the employer for the purpose of disclosure to the public, and thus not a collection of information pursuant to 5 CFR 1320.3(c)(2). Therefore, OSHA is taking no burden hours or cost for this requirement.
§ 1910.1024(n) -- Recordkeeping.
§ 1910.1024(n)(1)(i), (ii), & (iii) -- Recordkeeping -- Air Monitoring Data.
(i) The employer must make and maintain a record of all exposure measurements taken to assess airborne exposure as prescribed in paragraph (d) of this standard.
(ii) This record must include at least the following information:
(A) The date of measurement for each sample taken;
(B) The task that is being monitored;
(C) The sampling and analytical methods used and evidence of their accuracy;
(D) The number, duration, and results of samples taken;
(E) The type of personal protective clothing and equipment, including respirators, worn by monitored employees at the time of monitoring; and
(F) The name and job classification of each employee represented by the monitoring, indicating which employees were actually monitored.
(iii) The employer must ensure that exposure records are maintained and made available in accordance with the Records Access standard (29 CFR 1910.1020).
Purpose: OSHA believes that exposure records are necessary and appropriate for protection of worker health, enforcement of the standards, and development of information regarding the causes and prevention of occupational illnesses. Also, the agency and others can use the records to identify illnesses and deaths that may be attributable to beryllium exposure, evaluate compliance programs, and assess the efficacy of the standards. Establishing and maintaining records of air-monitoring data permit employers, workers, OSHA, and other interested parties (i.e., industry trade associations and worker unions or comparable organizations) to identify the levels, durations, and extent of occupational hazards related to beryllium exposure. The records will allow interested parties to determine if existing controls are protecting workers or whether additional controls are necessary to provide the required protection. These records also allow OSHA to ascertain whether employers are complying with the standards, thereby ensuring that workers are receiving adequate protection from occupational exposure to beryllium and beryllium compounds.
§ 1910.1024(n)(2)(i), (ii), & (iii) -- Recordkeeping -- Objective Data.
(i) Where an employer uses objective data to satisfy the exposure assessment requirements under paragraph (d)(2) of this standard, the employer must make and maintain a record of the objective data relied upon.
(ii) This record must include at least the following information:
(A) The data relied upon;
(B) The beryllium-containing material in question;
(C) The source of the objective data;
(D) A description of the process, task, or activity on which the objective data were based; and
(E) Other data relevant to the process, task, activity, material, or airborne exposure on which the objective data were based.
(iii) The employer must ensure that objective data are maintained and made available in accordance with the Records Access standard (29 CFR 1910.1020).
Purpose: The records of objective data required under paragraph (n)(2) are necessary and appropriate for protection of worker health, enforcement of the standard, and development of information regarding the causes and prevention of occupational illnesses. The agency and others can use the records to identify illnesses and deaths that may be attributable to beryllium exposure, evaluate compliance programs, and assess the efficacy of the standard. Establishing and maintaining records of air-monitoring data permit employers, workers, OSHA, and other interested parties (i.e., industry trade associations and worker unions, or comparable organizations) to identify the levels, durations, and extent of beryllium exposure, determine if existing controls are protecting workers or whether additional controls are necessary to provide the required protection, and assess the relationship between beryllium exposure and the subsequent development of diseases. These records also allow OSHA to ascertain whether employers are complying with the standard, thereby ensuring that workers are receiving adequate protection from beryllium exposure.
There is no burden taken for the items in paragraph (n)(2) because OSHA assumes any burden for the purposes of this Supporting Statement is incurred under the scheduled monitoring option.
§ 1910.1024(n)(3) (i), (ii), & (iii) – Recordkeeping -- Medical Surveillance.
(i) The employer must make and maintain a record for each employee covered by medical surveillance under paragraph (k) of this standard.
(ii) The record must include the following information about the employee:
(A) Name and job classification;
(B) A copy of all licensed physicians' written medical opinions for each employee; and
(C) A copy of the information provided to the PLHCP as required by paragraph (k) (4) of this standard.
(iii) The employer must ensure that medical records are maintained and made available in accordance with the Records Access standard (29 CFR 1910.1020).
Purpose: These medical surveillance records, like exposure records, are necessary and appropriate for protection of worker health, enforcement of the standard, and development of information regarding the causes and prevention of occupational illnesses. Worker access to medical surveillance records helps protect workers because such records contribute to the evaluation of workers’ health and enable workers and their healthcare providers to make informed health care decisions. Furthermore, the employer can evaluate medical-surveillance data they receive for indications that workplace conditions are associated with increased risk of beryllium-related illnesses, and take appropriate corrective actions. Finally, the agency and others can use medical surveillance records to identify illnesses and deaths that may be attributable to respirable beryllium exposure, evaluate compliance programs, and assess the efficacy of the standard.
§ 1910.1024(n)(4)(i) & (ii) -- Recordkeeping -- Training.
(4) Training.
(i) At the completion of any training required by this standard, the employer must prepare a record that indicates the name and job classification of each employee trained, the date the training was completed, and the topic of the training.
(ii) This record must be maintained for three years after the completion of training.
Purpose: The creation and maintenance of the training records will permit both OSHA and employers to ensure that required training has occurred on schedule.
§ 1910.1024(n)(5) -- Recordkeeping -- Employee Access to Records.
(5) Access to records. Upon request, the employer must make all records maintained as a requirement of this standard available for examination and copying to the Assistant Secretary, the Director, each employee, and each employee's designated representative(s) in accordance the Records Access standard (29 CFR 1910.1020).
Purpose: OSHA is requiring access to the records to ensure enforcement of the standard and to assist employees and their representatives in the development of information regarding the causes and prevention of occupational illnesses.
§ 1910.1024(n)(6) -- Recordkeeping -- Transfer of Records.
(6) Transfer of records. The employer must comply with the requirements involving transfer of records set forth in the Records Access standard (29 CFR 1910.1020).
Paragraph (h) of § 1910.1020 requires employers who cease to do business to transfer medical and exposure-monitoring records to the successor employer, who then must receive and maintain the records. If no successor employer is available, the employer must, at least three months before ceasing business, notify current workers who have records of their right to access these records.
Purpose: OSHA considers the employer’s transfer of records to a successor employer to be usual and customary communications during the transition from one employer to a successor employer, and is not taking any burden or cost for this provision in Item 12. In this regard, the employer would communicate the location of all records, including employee exposure-monitoring and medical records, at the facility to the successor employer during the transfer of business operations, as a matter of usual and customary business practice.
Employers may use improved information technology when establishing and maintaining the required records. The agency wrote the paperwork requirements of the standard in performance-oriented language, i.e., in terms of what data to collect, not how to record the data.
The information collection requirements of the beryllium general industry standard are specific to each employer and worker involved, and no other source or agency duplicates these requirements or can make the required information available to the agency (i.e., the required information is available only from employers).
The information collection requirements of the standard do not have a significant impact on a substantial number of small entities.
The information collection frequencies specified by the general industry standard are the minimum frequencies that the agency believes are necessary to ensure that employers and OSHA can effectively monitor the exposure and health status of workers, thereby preventing serious illness or death resulting from hazardous exposure to beryllium.
· Requiring respondents to report information to the agency more often than quarterly;
· Requiring respondents to prepare a written response to a collection of information in fewer than 30 days after receipt of it;
· Requiring respondents to submit more than an original and two copies of any
document;
· Requiring respondents to retain records, other than health, medical, government contract, grant-in-aid, or tax records, for more than three years;
· In connection with a statistical survey, that is not designed to produce valid and reliable results that can be generalized to the universe of study;
· Requiring the use of a statistical data classification that has not been approved by OMB;
· That includes a pledge of confidentiality that is not supported by authority established in statute or regulation, that is not supported by disclosure and data security policies that are consistent with the pledge, or which unnecessarily impedes sharing of data with other agencies for compatible confidential use; or
· Requiring respondents to submit proprietary trade secret, or other confidential information unless the agency can demonstrate that it has instituted procedures to protect the information's confidentiality to the extent permitted by law.
The standard also requires that exposure records, paragraph (n)(1)(iii), objective data, paragraph (n)(2)(iii), and medical records, paragraph (n)(3)(iii), be maintained pursuant to OSHA’s Records Access standard (29 CFR 1910.1020). Under the records access standard, 29 CFR 1910.1020(d)(1)(i), the medical records for each employee must be preserved and maintained for at least the duration of employment plus 30 years, with certain exceptions (see 29 CFR 1910.1020(d)(1)(i)(A)-(C)). Similarly, under 29 CFR 1910.1020(d)(1)(ii) and (iii), employee exposure records, as well as analyses using exposure or medical records, must be preserved and maintained for 30 years.
Describe efforts to consult with persons outside the agency to obtain their views on the availability of data, frequency of collection, the clarity of instructions and recordkeeping, disclosure, or reporting format (if any), and on the data elements to be recorded, disclosed, or reported.
Consultation with representatives of those from whom information is to be obtained or those who must compile records should occur at least once every three years -- even if the collection of information activity is the same as in prior periods. There may be circumstances that may preclude consultation in a specific situation. These circumstances should be explained.
As required by the Paperwork Reduction Act of 1995 (44 U.S.C. 3506(c)(2)(A)), OSHA published a Federal Register notice on March 12, 2024 (89 FR 17882) soliciting public comments on its proposed extension of the information collection requirements specified by the standard on the Occupational Exposure to Beryllium in General Industry (29 CFR part 1910.1024) under Docket Number OSHA-2019-0010. This notice was part of a preclearance consultation program intended to provide those interested parties the opportunity to comment on OSHA’s request for an extension and revision by the Office of Management and Budget (OMB) of a previous approval of the information collection requirements found in the above standard. The agency did not receive any public comments in response to this notice.
The agency will not provide payments or gifts to the respondents.
To ensure that the personal information contained in medical records required by the standard remains confidential, the agency developed and implemented 29 CFR 1913.10 (“Rules of Agency Practice and Procedure Concerning OSHA Access to Employee Medical Records”) to regulate access to these records.
Questions of a sensitive nature may be included in medical questions posed by the PLHCP to properly diagnose the patient and make appropriate recommendations regarding further testing and the employee’s occupational exposure to beryllium.
Indicate the number of respondents, frequency of response, annual hour burden, and an explanation of how the burden was estimated. Unless directed to do so, agencies should not conduct special surveys to obtain information on which to base hour burden estimates. Consultation with a sample (fewer than 10) of potential respondents is desirable. If the hour burden on respondents is expected to vary widely because of differences in activity, size, or complexity, show the range of estimated hour burden, and explain the reasons for the variance. Generally, estimates should not include burden hours for customary and usual business practices.
· If this request for approval covers more than one form, provide separate hour burden estimates for each form and aggregate the hour burdens.
· Provide estimates of annualized costs to respondents for the hour burdens for collections of information, identifying and using appropriate wage rate categories.
Respondent Hour and Cost Burden Determinations
The burden hours and cost determinations are based on OSHA’s Final Economic Analysis (FEA) for the rulemaking, Occupational Exposure to Beryllium in General Industry (82 FR 2470), and the FEA for the 2017 final rule, where applicable. The 2017 FEA can be found on regulations.gov at docket ID OSHA-H005C-2006-0870-2042. This Supporting Statement provides a summary of the determinations made by the agency for the burden hours, burden-hour cost, and capital (operation and maintenance) costs under Items 12 and 13. The non-compliance rates and some assumptions are based on the Supporting Statement for the Information Collection Requirements in the Final Beryllium Standard for General Industry (29 CFR 1910.1024), Construction (29 CFR 1926.1124), and Maritime (29 CFR 1915.1024), published January 9, 2017.3
In the general industry sector, the agency estimates there are a total of 50,261 employees affected in 4,538 establishments.4
For the sole purpose of calculating burden hours and costs under the Paperwork Reduction Act, this supporting statement has rounded certain numbers up to obtain the totals stated in the supporting statement equations. Such presentation makes it easier for the public to read and validate the supporting statement’s burden hour and cost estimates.
Wage Rates
The agency obtained the mean hourly wage rates from the May 2022 National Occupational Employment and Wage Estimates, Occupational Employment and Wage Statistics (OES) of the Bureau of Labor Statistics (BLS, 2023a), May 2022 National Occupational Employment and Wage Estimates (bls.gov), utilizing the mean wage for the appropriate occupation and the North American Industry Classification System (NAICS) with the applied fringe benefit mark up from Employer Costs for Employee Compensation released in December 15, 2023. The Standard Occupational Classification (SOC) code has been provided for each occupational title. For purposes of this supporting statement, the Manufacturing Industry was used as the reference industry (NAICS sectors 31, 32, 33). OSHA applied a fringe benefit of 29.4 percent to the base wages. Loaded hourly wages by application group and SOC are shown below.
Table A summarizes how the wage rate estimates were derived for the information collection requirements specified by the standard.
Table A –Wage Rates Estimates
Occupation |
SOC Code |
Mean Hourly Rate (A) |
Fringe Benefit5
(B) |
Loaded Hourly Wage
(C) = [(A)/(1-(B)] |
1st Line Supervisor of Production and Operation Workers |
51-1011 |
$33.22 |
29.4% |
$47.05 |
Production Worker |
51-0000 |
$21.81 |
29.4% |
$30.89 |
Clerical Worker (File Clerk) |
43-4071 |
$19.02 |
29.4% |
$26.94 |
Human Resources (HR) Manager |
11-3121 |
$70.07 |
29.4% |
$99.25 |
Paragraph (d) sets forth requirements for assessing employee exposures to beryllium. Paragraph (d)(1) requires employers to choose either the performance option in paragraph (d)(2) or the scheduled monitoring option in paragraph (d)(3). The collections of information and associated burden are therefore accounted for in paragraph (d)(2) and (d)(3).
§ 1910.1024(d)(2) -- Performance Option.
When the employer elects the performance option, the employer must assess the 8-hour TWA exposure and the 15-minute short-term exposure for each employee on the basis of any combination of air monitoring data and objective data sufficient to accurately characterize airborne exposure to beryllium. Employers do not have to conduct initial exposure monitoring if they relied on any combination of air monitoring and objective data.
OSHA has not taken any separate burden associated with the performance option, assuming for the purposes of this analysis that all employers would elect the more burdensome scheduled monitoring system. OSHA recognizes that the performance option is less burdensome and thus the agency may have overestimated the burden hours for the monitoring option under this approach.
§ 1910.1024(d)(3)(i), (ii), & (iii) -- Scheduled Monitoring Option.
1. Initial Monitoring
Paragraph (d)(3)(i) requires the employer to perform initial monitoring to assess the 8-hour TWA exposure for each employee on the basis of one or more personal breathing zone air samples that reflect the airborne exposure of employees on each shift, for each job classification, and in each work area.
Paragraph (d)(3)(ii) requires the employer to perform initial monitoring to assess the short-term exposure from 15-minute personal breathing zone air samples measured in operations that are likely to produce airborne exposure above the STEL for each work shift, for each job classification, and in each work area. Paragraph (d)(3)(iii) allows the employer to sample a representative fraction of these employees in order to meet the requirements of paragraph (d)(3) of this standard where several employees perform the same tasks on the same shift and in the same work area. And paragraph (d)(3)(iv) allows the employer to discontinue monitoring for those employees whose airborne exposure is represented by such monitoring if initial monitoring indicates that airborne exposure is below the action level and at or below the STEL.
As noted above in Item 12 of this Supporting Statement, the total number of workers affected is 50,261. Of these affected workers, there are 6,804 dental laboratory workers who will not be sampled because laboratories will substitute a different material in lieu of continuing to work with beryllium. Excluding these dental laboratory workers, the number of affected workers for initial monitoring is 43,457. Note: 50,261 – 6,804 dental labs workers = 43,457. The number of workers that will be directly subjected to initial monitoring (10,864) is the number of affected workers in each NAICS, divided by 4 because there are 4 workers represented by each sample [43,457/4=10,864]. Each sampled production worker will incur 30 minutes (30/60 hours) of lost work time during air monitoring,6 at an hourly wage rate of $30.89. Baseline non-compliance with this requirement is estimated to be 38 percent. The burden hours and cost associated with these provisions are:
Burden hours: 10,864 (samples) x 0.38 (non-compliance rate) 30/60 (hours of Production Worker time) = 2,064 hours
One-Time Cost: 2,064 (hours) $30.89 (Production Worker wage) = $63,757
§ 1910.1024(d)(3)(v), (vi), (vii), & (viii) -- Scheduled Monitoring Option.
Paragraph (d)(3)(v) requires the employer to repeat such monitoring within six months of the most recent monitoring where the most recent exposure monitoring indicates that airborne exposure is at or above the action level but at or below the TWA PEL. Paragraph (d)(3)(vi) requires the employer to repeat such monitoring within three months of the most recent 8-hour TWA exposure monitoring where the most recent exposure monitoring indicates that airborne exposure is above the TWA PEL. Paragraph (d)(3)(vii) requires that the employer must repeat such monitoring within six months of the most recent monitoring until two consecutive measurements, taken seven or more days apart, are below the action level, at which time the employer may discontinue 8-hour TWA exposure monitoring for those employees whose exposure is represented by such monitoring, except as otherwise provided in paragraph (d)(4) of this standard where the most recent (non-initial) exposure monitoring indicates that airborne exposure is below the action level. And, paragraph (d)(3)(viii) requires that the employer must repeat such monitoring within three months of the most recent short-term exposure monitoring until two consecutive measurements, taken seven or more days apart, are below the STEL, at which time the employer may discontinue short-term exposure monitoring for those employees whose exposure is represented by such monitoring, except as otherwise provided in paragraph (d)(4) of this standard where the most recent exposure monitoring indicates that airborne exposure is above the STEL.
All Industries Between AL and PEL:
The existing ICR estimates there are 20,732 at-risk workers above the action level and below the PEL. The 5,877 workers in dental labs currently above the action level and below the PEL are excluded because they are expected to stop working with beryllium (see the FEA for the 2017 Final Rule, Chapter V, p. V-127, available at https://www.regulations.gov/document?D=OSHA-H005C-2006-0870-2042). The remaining workers are 5,7447 abrasive blasters in shipyards, 11 shipyard sector welding workers, and 9,101 general industry workers.
All Industries Above the PEL:
The existing ICR estimates there are 1,056 workers above the PEL. The 434 workers in dental labs with exposures above the PEL are excluded because they are expected to stop working with beryllium (see the FEA for the 2017 Final Rule, Chapter V, p. V-127, available at https://www.regulations.gov/document?D=OSHA-H005C-2006-0870-2042). The remaining workers are 217 abrasive blasters and 405 general industry workers above the PEL.
General Industry Workers
Workers between AL and PEL:
For periodic monitoring, OSHA calculated the number of monitoring samples being taken for general industry workers (excluding dental laboratory workers) by dividing the number of workers (9,101) by four workers represented per sample, then multiplying the samples by two per year for 4,550 samples. (9,101 workers/4 x 2 samples per year = 4,550 samples)
Above the PEL:
OSHA calculated the number of monitoring samples for the 405 general industry workers above the PEL (excluding dental laboratory workers) by dividing the number of 405 workers by four workers per sample, then multiplying by four times per year to equal 405 samples.
(405/4 x 4 samples per year = 405)
Summary
Therefore, the agency estimates that there will be a total of 4,955 samples per year taken in general industry. This total includes workers between the AL (0.1 μg/m³) and PEL (0.2 μg/m³) that are sampled twice per year, and those workers over the PEL that are sampled four times per year (4,550 samples + 405 samples = 4,955 samples).
OSHA estimates that each employer will conduct periodic exposure monitoring (once every six months when initial or subsequent exposure monitoring reveals that worker exposures are at or above the action level, but at or below the PEL; and above the PEL). Each periodic exposure monitoring sample (4,955 samples) will result in 30 minutes (30/60 hours) of lost work time during air monitoring. Baseline non-compliance with this requirement is estimated to be 37 percent. The burden hours and cost associated with these provisions are:
Burden hours: 4,955 (samples) 0.37 (non-compliance rate) 30/60 (hours of Production Worker time) = 917 hours
Annual Cost: 917 (hours) $30.89 (Production Worker wage) = $28,326
§ 1910.1024(d)(4) -- Reassessment of Exposure.
The employer must reassess airborne exposure whenever a change in the production, process, control equipment, personnel, or work practices may reasonably be expected to result in new or additional airborne exposure at or above the action level or STEL, or when the employer has any reason to believe that new or additional airborne exposure at or above the action level or STEL has occurred.
Of the number of at-risk workers subject to initial monitoring, 10,864 workers (see previous paragraph, Initial Monitoring), OSHA estimates 10 percent (1,086) will require additional monitoring resulting from changes in the production process, materials, equipment, personnel, work practices, or control methods. Each worker will incur 30 minutes (30/60 hours) of lost work time during air monitoring. Baseline non-compliance with this requirement is estimated to be 38 percent. The burden hours and cost associated with these provisions are:
Burden hours: 1,086 (workers sampled) x 1 (assessment per year) x 0.38 (non-compliance rate) x 30/60 (hours of Production Worker time) = 207 hours
Cost: 207 (hours) x $30.89 (Production Worker wage) = $6,394
4. Employee Notification
§ 1910.1024(d)(6)(i) & (ii) -- Employee Notification of Assessment Results.
Paragraph (d)(6)(i) requires employers, within 15 working days after completing an exposure assessment in accordance with paragraph (d) of this standard, to notify each employee whose airborne exposure is represented by the assessment of the results of that assessment individually in writing or by posting the results in an appropriate location that is accessible to each of these employees.
Whenever an exposure assessment indicates that airborne exposure is above the TWA PEL or STEL, paragraph(d)(6)(ii) requires the employer to describe in the written notification the corrective action being taken to reduce airborne exposure to or below the exposure limit(s) exceeded where feasible corrective action exists but had not been implemented when the monitoring was conducted.
These burden hours are included in the Human Resources Manager time under Item 12 C.1 Recordkeeping § 1910.1024(n)(1). As a result, employee notification does not appear as a separate entry on Table B. Summary of Burden Hours, Burden-Hour Cost and Capital Cost Under Item 12 of this Supporting Statement
§ 1910.1024(f)(1)(i), (ii), & (iii) -- Methods of Compliance -- Written Exposure Control Plan.
Paragraph (f)(1) requires the employer to establish, implement, and maintain a written exposure control plan for beryllium work areas. The employer is required to review and evaluate the effectiveness of each written exposure control plan at least annually and update it as necessary. Also, the employer is required to make a copy of the written exposure control plan and make it accessible to each employee who is, or can reasonably be expected to be, exposed to airborne beryllium.
There are 3,0778 affected establishments for general industry.
OSHA estimates that 3,077 establishments in general industry are potentially at risk from exposure to beryllium. The agency estimates a Human Resource Manager, earning an hourly wage of $99.25, spends eight hours per establishment to develop a written exposure control plan. Baseline non-compliance with this requirement is estimated to be 35 percent.
Burden hours: 3,077 (written plans) 0.35 (non-compliance rate) 8 (hours of HR Manager time) = 8,616 hours
One-Time Cost: 8,616 (hours) $99.25 (HR Manager wage) = $855,138
Additional Costs based on Size of Establishment to Implement Plan:
The cost to implement a written exposure control plan will also vary with the number of employees, with larger establishments having higher costs than smaller establishments. Therefore OSHA has added additional burden and cost on a per-employee basis. OSHA estimates that there are a total of 43,4579 general industry workers at risk with a non-compliance rate of 29 percent. Managers are estimated to need 30/60 hours per employee to write the plan.
Burden hours: 43,457 (employees) 0.29 (non-compliance rate) 30/60 (hours of HR Manager time) = 6,302 hours
One time Cost: 6,302 (hours) $99.25 (HR Manager wage) = $625,474
The employer must maintain and update the exposure control plan when: any change in production processes, materials, equipment, personnel, work practices, or control methods results or can reasonably be expected to result in new or additional exposures to beryllium; an employee is confirmed positive, is diagnosed with CBD, or shows signs or symptoms associated with exposure; or the employer has any reason to believe that new or additional exposures are occurring or will occur.
Employers must make a copy of the written exposure control plan accessible to each employee who is or can reasonably be expected to be exposed to airborne beryllium in accordance with OSHA’s Access to Employee Exposure and Medical Records (Records Access) standard (29 CFR 1910.1020(e)). Burden hours and costs for employers to allow employees access to the written exposure control plan are included in this item of the supporting statement under section D, Employee Access to Exposure Monitoring and Medical Records, subsection 2, Access to Records (§ 1910.1024(n)(6)).
OSHA estimates that there are a total of 43,457 general industry employees at risk of exposures at or above the action level annually. Managers are estimated to need 12 minutes (12/60 hours) per affected employee per quarter, or 48 minutes (4 x 12) (48/60 hours) per affected employee per year to review and update the plan. Baseline non-compliance with this requirement is estimated to be 29 percent.
Burden hours: 43,457 (employees) 0.29 (non-compliance rate) 48/60 (hours of HR Manager time) = 10,082 hours
Annual Cost: 10,082 (hours) $99.25 (HR Manager wage) = $1,000,639
§ 1910.1024(g)(2) -- Respiratory protection program.
Where this standard requires an employer to provide respiratory protection, the selection and use of such respiratory protection must be in accordance with the Respiratory Protection standard (29 CFR 1910.134).
Develop and Implement Written Respiratory Protection Program
There is a cost per establishment to set up a written respiratory protection program in accordance with the respiratory protection standard (29 CFR 1910.134). The respiratory protection standard requires written procedures for the proper selection, use, cleaning, storage, and maintenance of respirators. OSHA estimates that 46510 general industry establishments are potentially at risk from exposure to beryllium that could exceed the PEL. There are 186 general industry establishments that will need to develop and implement a respirator program. It estimates that a Human Resource Manager, earning an hourly wage of $99.25, would spend eight hours per establishment to develop and implement a written respirator program. Baseline non-compliance with this requirement is estimated to be 26 percent.
Burden hours: 186 (respirator program per establishment) 0.26 (non-compliance rate) 8 (hours of HR Manager time) = 384 hours
One-Time Cost: 384 (hours) $99.25 (HR Manager wage) = $38,112
Updating and Maintaining:
There are 186 establishments that will need to update and maintain a respirator program. OSHA estimates that a Human Resource Manager, earning an hourly wage of $99.25, would spend two hours per establishment to maintain and update a written respirator program. Baseline non-compliance with this requirement is estimated to be 26 percent.
Burden hours: 186 (respirator program per establishment) 0.26 (non-compliance rate) 2 hours (HR Manager time) = 96 hours
Annual Cost: 96 (hours) $99.25 (HR Manager wage) = $9,528
In-House Fit Testing for the Employees
The employers will conduct respirator fit testing for the 433 general industry workers11 who will need to wear respirators. OSHA estimates that it will take 30 minutes (30/60 hours) for a worker to be fit-tested per respirator and 40 percent of the 433 workers will need to be fit tested.
Burden hours: 433 (employees) 0.4 (non-compliance rate) 30/60 (hours of employee time) = 87 hours
Annual Cost: 87 (hours) $30.89 (Employee wage) = $2,687
In-House Fit Testing by Supervisors
The employers will conduct in-house fit testing for the 433 general industry workers who will need to wear respirators. OSHA estimates that in-house supervisors will administer the 433 fit-tests and it will take 30 minutes (30/60 hours) for a worker to be fit-tested per respirator and 40 percent of the 433 workers will need to be fit tested.
Burden hours: 433 (Supervisor) 0.4 (non-compliance rate) 30/60 (hours of Supervisor time) = 87 hours
Annual Cost: 87 (hours) $47.05 (Supervisor wage) = $4,093
§ 1910.1024(h)(3)(iii) -- Personal Protective Clothing and Equipment -- Cleaning and Replacement.
Paragraph (h)(3)(iii) requires the employer to inform in writing the persons or the business entities who launder, clean, or repair the personal protective clothing or equipment required by this standard of the potentially harmful effects of airborne exposure to and dermal contact with beryllium and that the personal protective clothing and equipment must be handled in accordance with this standard.
There are 2,55812 general industry establishments potentially at risk from exposure to beryllium that will need to send out clothing and equipment for laundering, cleaning, or repair. OSHA estimates that it will take approximately 10 minutes (10/60 hours) of a clerical worker’s time to inform the person or business in writing of the potentially harmful effects of the laundering, cleaning or repair of the clothing or equipment. Baseline non-compliance with this requirement is estimated to be 15 percent.
Burden hours: 2,558 (establishments) 0.15 (non-compliance rate) 10/60 (hours of Clerical worker time) = 65 hours
Annual Cost: 65 (hours) $26.94 (Clerical worker’s wage) = $1,751
§ 1910.1024(k)(1), (2), & (3) -- Medical Surveillance.
Paragraph (k)(1) requires the employer to make medical surveillance required by this paragraph available at no cost to the employee, and at a reasonable time and place, to each employee: (A) Who is or is reasonably expected to be exposed at or above the action level for more than 30 days per year; (B) Who shows signs or symptoms of CBD or other beryllium-related health effects; (C) Who is exposed to beryllium during an emergency; or (D) Whose most recent written medical opinion required by paragraph (k)(6) or (k)(7) recommends periodic medical surveillance.
Also, the employer must ensure that all medical examinations and procedures required by this standard are performed by, or under the direction of, a licensed physician.
Paragraph (k)(2) requires the employer to provide a medical examination: (i) Within 30 days after determining that: (A) An employee meets the criteria of paragraph (k)(1)(i)(A), unless the employee has received a medical examination, provided in accordance with this standard, within the last two years; or (B) An employee meets the criteria of paragraph (k)(1)(i)(B). (ii) At least every two years thereafter for each employee who continues to meet the criteria of paragraph (k)(1)(i)(A), (B), or (D) of this standard. (iii) At the termination of employment for each employee who meets any of the criteria of paragraph (k)(1)(i) of this standard at the time the employee’s employment terminates, unless an examination has been provided in accordance with this standard during the six months prior to the date of termination. Each employee who meets the criteria of paragraph (k)(1)(i)(C) and who has not received an examination since exposure to beryllium during the emergency must be provided an examination at the time the employee's employment terminates. (iv) For an employee who meets the criteria of paragraph (k)(1)(i)(C): (A) If that employee has not received a medical examination within the previous two years pursuant to paragraph (k)(1)(i), then within 30 days the employee meets the criteria of paragraph (k)(1)(i)(C); or (B) If that employee has received a medical examination within the previous two years pursuant to paragraph (k)(1)(i), then at least one year but no more than two years after the employee meets the criteria of paragraph (k)(1)(i)(C).
The number of workers subject to initial medical surveillance in the first year and periodic surveillance in each year includes both those who are over the AL and those showing signs and symptoms (of CBD or sensitization).
Employers will be required to provide medical examinations for 14,59813 employees. OSHA estimated the examination14 requires 125 minutes (or 2.08 hours) away from work for each employee each year to complete an initial medical examination. This includes time for traveling, a health history review, the physical exam, a beryllium lymphocyte proliferation test (BeLPT), the pulmonary function test, and employee time when the PLHCP explains the results of the medical examination to the employee. Baseline non-compliance with this requirement is estimated to be 28 percent. The burden hours and annual cost associated with these provisions are:
Medical Exams
Initial and Periodic Exams
Burden hours: 14,598 (examinations) x 0.28 (non-compliance rate) × 2.08 (hours of Production Worker time) = 8,501 hours
Biennial Cost: 8,380 hours × $30.89 (Production worker wage) = $262,596
Note: The agency estimates that 10 percent of the standard medical examinations will lead to further tests recommended by the PLHCP15 and are included in the cost and time of the 14,598 employees unless otherwise provided below.
§ 1910.1024(k)(7)
The employer must provide an evaluation at no cost to the employee at a CBD diagnostic center that is mutually agreed upon by the employer and the employee. The evaluation at the CBD diagnostic center must be scheduled within 30 days, and must occur within a reasonable time, of:
(A) The employer’s receipt of a physician’s written medical opinion to the employer that recommends referral to a CBD diagnostic center; or
(B) The employee presenting to the employer a physician’s written medical report indicating that the employee has been confirmed positive or diagnosed with CBD, or recommending referral to a CBD diagnostic center.
(ii) The employer must ensure that, as part of the evaluation, the employee is offered any tests deemed appropriate by the examining physician at the CBD diagnostic center, such as pulmonary function testing (as outlined by the American Thoracic Society criteria), bronchoalveolar lavage (BAL), and transbronchial biopsy. If any of the tests deemed appropriate by the examining physician are not available at the CBD diagnostic center, they may be performed at another location that is mutually agreed upon by the employer and the employee.
Referral exams to the CBD Diagnostic Center -- Traveling Workers
The estimated annual number of referrals that will require traveling more than a day to the CBD diagnostic center is 690. It will take 24 hours and 15 minutes for each employee to travel by plane to and from the center and complete the medical examination.
Burden hours: 690 referrals traveling x 0.4 (non-compliance) x 24.25 hours = 6,693 hours
Cost: 6,693 hours x $30.89 (Production worker wage) = $206,747
Referral exams to the CBD Diagnostic Center – Non-Traveling Workers
The estimated annual number of referrals exams taking less than a day to travel to the CBD diagnostic center is 230. It will take 4 hours and 15 minutes for each employee to travel to and from the local center and complete the medical examination.
Burden hours: 230 referrals non travel x 0.4 (non-compliance) x 4.25 hours = 391 hours
Cost: 391 hours x $30.89 (Production worker wage) = $12,078
§ 1910.1024(k)(4) -- Medical Surveillance -- Information Provided to the PLHCP.
(4) The employer must ensure that the examining PLHCP (and the agreed-upon CBD diagnostic center, if an evaluation is required under paragraph (k)(7) of this standard) has a copy of this standard and must provide the following information, if known:
(i) A description of the employee’s former and current duties that relate to the employee’s airborne exposure to and dermal contact with beryllium;
(ii) The employee’s former and current levels of airborne exposure;
(iii) A description of any personal protective clothing and equipment, including respirators, used by the employee, including when and for how long the employee has used that personal protective clothing and equipment; and
(iv) Information from records of employment-related medical examinations previously provided to the employee, currently within the control of the employer, after obtaining written consent from the employee.
In the standard, the employer must ensure that the examining PLHCP (and the agreed-upon CBD diagnostic center, if an evaluation is required under paragraph (k)(7) of this standard) has a copy of this standard and shall provide the following information, if known: a description of the employee’s former and current duties that relate to the employee’s occupational exposure; the employee’s former and current levels of occupational exposure; a description of any personal protective clothing and equipment, including respirators, used by the employee, including when and for how long the employee has used that personal protective clothing and equipment; and information from records of employment-related medical examinations previously provided to the employee, currently within the control of the employer, after obtaining a medical release from the employee.
OSHA estimates that it will take 15 minutes (15/60 hours) of a Supervisor’s time to gather and provide the information needed for the PLHCP. Baseline non-compliance with this requirement is estimated to be 28 percent.
Burden hours: 14,598 (employees) 0.28 (non-compliance rate) 15/60 (hours of Supervisor time) = 1,022 hours
Biennial Cost: 1,022 (hours) $47.05 (Supervisor wage) = $48,085
§ 1910.1024(k)(6) Medical Surveillance -- Licensed Physician’s Written Medical Opinion for the Employer.
Paragraph (k)(6)(i) requires the employer to obtain a written medical opinion from the licensed physician within 45 days of the medical examination (including any follow-up BeLPT required under paragraph (k)(3)(ii)(E) of this standard).
There are 14,598 affected employees that the employer will need to provide a copy of the licensed physician’s written opinion. OSHA estimates that it will take 5 minutes (5/60 hour) of a Supervisor’s time to provide a copy of the information to the employee. Baseline non-compliance with this requirement is estimated to be 28 percent.
Supervisor:
Burden hours: 14,598 (employees) 0.28 (non-compliance rate) 5/60 (hours of Supervisor time) = 341 hours
Biennial Cost: 341 (hours) $47.05 (Supervisor wage) = $16,044
§ 1910.1024(l)(1) & (2) -- Medical removal.
(1) An employee is eligible for medical removal, if the employee works in a job with airborne exposure at or above the action level and either:
(i) The employee provides the employer with:
(A) A written medical report indicating a confirmed positive finding or CBD diagnosis; or
(B) A written medical report recommending removal from airborne exposure to beryllium in accordance with paragraph (k)(5)(v) or (k)(7)(iii) of this standard; or
(ii) The employer receives a written medical opinion recommending removal from airborne exposure to beryllium in accordance with paragraph (k)(6)(v) or (k)(7)(iv) of this standard.
(2) If an employee is eligible for medical removal, the employer must provide the employee with the employee’s choice of:
(i) Removal as described in paragraph (l)(3) of this standard; or
(ii) Remaining in a job with airborne exposure at or above the action level, provided that the employer provides, and ensures that the employee uses, respiratory protection that complies with paragraph (g) of this standard whenever airborne exposures are at or above the action level.
OSHA estimates that 445 employees16 will request medical removal because of a positive finding of CBD. OSHA also estimates that it will take five minutes (5/60 hour) of a Supervisor’s time to receive and process (including conveying the two options under (l)(2)) for each medical removal request. OSHA anticipates that this will typically involve the employee authorizing that the PLHCP share a recommendation for removal with the employer. Baseline non-compliance with this requirement is estimated to be 40 percent.
Burden hours: 445 employees x 0.4 (non-compliance) x 5/60 hours = 15 hours
Cost: 15 hours x $47.05 (Supervisor wage) = $706
§ 1910.1024(n)(1)(i), (ii), & (iii) -- Recordkeeping -- Air Monitoring Data.
Under paragraph (n)(1)(i), the employer must make and maintain a record of all exposure measurements taken to assess airborne exposures as required by paragraph (d) of the standard. Paragraph (n)(1)(ii) states the required elements of the exposure measurement records. Under paragraph (n)(1)(iii), employers must ensure that these exposure records are maintained and made available in accordance with the Records Access standard (29 CFR 1910.1020).
As determined under Initial Exposure Monitoring, paragraph (d)(3), the agency estimates there are 10,864 exposure monitoring records being generated for this purpose in general industry. The agency estimates that an HR manager will spend 15 minutes (15/60 hours) developing and maintaining records for employee records at a loaded hourly wage of $99.25, which includes time to notify employees of the results of the exposure monitoring (typically accomplished by posting the results).17 Baseline non-compliance with this requirement is estimated to be 38 percent. The burden hours and cost associated with these provisions are:
Burden hours: 10,864 (workers sampled) 0.38 (non-compliance rate) 15/60 (hours of HR Manager time) = 1,032 hours
One-Time Cost: 1,032 (hours) $99.25 (HR Manager wage) = $102,426
As determined under Periodic Exposure Monitoring, paragraph (d)(3), the agency estimates there are 4,955 required periodic monitoring samples.18 The agency estimates that an HR manager will spend 15 minutes (15/60 hours) developing and maintaining employee monitoring records at a loaded hourly wage of $99.25, which includes time to notify employees of the results of the exposure monitoring (typically accomplished by posting the results). Baseline non-compliance with this requirement is estimated to be 37 percent. The burden hours and cost associated with these provisions are:
Burden hours: 4,955 (workers sampled per year) 0.37 (non-compliance rate) 15/60 (hours of HR Manager time) = 458 hours
Annual Cost: 458 (hours) $99.25 (HR Manager wage) = $45,457
Of the number of at-risk workers subject to initial monitoring, 10,864 workers (see previous paragraph, Initial Monitoring), OSHA estimates 10 percent, 1,086 workers, will require additional monitoring resulting from changes in the production process, materials, equipment, personnel, work practices, or control methods. The agency estimates that an HR manager will spend 15 minutes (15/60 hours) maintaining the relevant records at a loaded hourly wage of $99.25, which includes time to notify employees of the results of the exposure monitoring. Baseline non-compliance with this requirement is estimated to be 38 percent. The burden hours and cost associated with these provisions are:
Burden hours: 1,086 (workers sampled per year) 0.38 (non-compliance rate) 15/60 (hours of HR Manager time) = 103 hours
Annual Cost: 103 (hours) $99.25 (HR Manager wage) = $10,223
1910.1024(n)(3) (i), (ii), & (iii) – Recordkeeping -- Medical Surveillance.
In the paragraph (n)(3)(i), the employer must make and maintain a record for each employee covered by medical surveillance under paragraph (k) of this standard.
a. Human Resource manager
A Human Resource manager would spend 15 minutes (15/60 hour) to read and copy the PLHCP’s opinion, provide and discuss the opinion with the employee and confirm that the employee received a medical report from the PLHCP, and discuss any necessary post-exam consultation with the employee. OSHA estimates that the number of post-exam records is 14,598 and that there are 920 referral exam records19 for a total of 15,518. Baseline non-compliance with this requirement is estimated to be 28 percent.
Burden hours: 15,518 (exam records) 0.28 (non-compliance rate) × 15/60 (hours of HR Manager time) = 1,086 hours
Annual Cost: 1,086 (hours) × $99.25 (HR Manager wage) = $107,786
Each file would require 5 minutes (5/60 hours) of a clerical worker’s time to generate and maintain. OSHA estimates that the total number of medical exam records per year is 15,518. Baseline non-compliance with this requirement is estimated to be 28 percent.
Burden hours: 15,518 (exam records) 0.28 (non-compliance rate) × 5/60 hours = 362 hours
Annual Cost: 362 hours × $26.94 (Clerical worker wage) = $9,752
§ 1910.1024(n)(4)(i) & (ii) -- Recordkeeping -- Training.
Paragraph (n)(4)(i) requires the employer to prepare a record of the training. This record must be maintained for three years after the completion of training.
OSHA estimates that there are 43,457 employees that will require a training record to be generated and maintained. A clerical worker will take 5 minutes (5/60 hours) to prepare and maintain these records for each employee receiving training. Baseline non-compliance with this requirement is estimated to be 26 percent.
Burden hours: 43,457 (training records) 0.26 (non-compliance rate) × 5/60 (hours of Clerical worker time) = 942 hours
Annual Cost: 942 (hours) × $26.94 (Clerical worker wage) = $25,377
Under the respiratory protection program, the employer must keep records of all respirator fit testing for every employee affected. OSHA estimates that there are 433 employees that will be fit tested for respirators. A clerical worker will have to generate and maintain these records. OSHA estimates that it will take a clerical worker 5 minutes (5/60 hours) to prepare and maintain these records for each employee being tested. The baseline for non-compliance is estimated to be 40 percent.
Burden hours: 433 (fit testing records) 0.4 (non-compliance rate) × 5/60 (hours of Clerical worker time) = 14 hours
Cost: 14 (hours) × $26.94 (Clerical worker wage) = $377
The employer must make a copy of the exposure control plan accessible to each employee who is or can reasonably be expected to be exposed to airborne beryllium in accordance with OSHA’s Access to Employee Exposure and Medical Records (Records Access) standard (29 CFR 1910.1020(e)).
OSHA estimates it takes 5 minutes (5/60 hours) of a clerical worker’s time to make the exposure control plan accessible to the worker. OSHA estimates that approximately 5 percent of the 43,456 at-risk workers, or 2,173 workers, will request access to their records per year. Baseline non-compliance with this requirement is estimated to be 29 percent.
Burden hours: 2,173 (worker requests for medical documentation) 0.29 (non-compliance rate) x 5/60 (hours of Clerical worker time) = 52 hours
One-Time Cost: 52 (hours) $26.94 (Clerical worker wage) = $1,401
§ 1910.1024(n)(5) -- Employee Access to Records.
Upon request, the employer must make all records maintained as a requirement of this standard available for examination and copying to the Assistant Secretary, the Director, each employee, and each employee’s designated representative(s) in accordance the Records Access standard (29 CFR 1910.1020). Employers must maintain exposure records and make them available in accordance with 29 CFR 1910.1020.
OSHA estimates that approximately 5 percent of the 43,456 at-risk workers, or 2,173 workers, will request access to their records per year. OSHA estimates that it takes 5 minutes (5/60 hours) of a Clerical worker’s time to disclose these records. Baseline non-compliance with this requirement is estimated to be 40 percent. The annual burden hours and cost for this task are estimated to be:
Burden hours: 2,173 (worker requests for medical documentation) 0.4 (non-compliance rate) 5/60 (hours of Clerical worker time) = 72 hours
Annual Cost: 72 (hours) $26.94 (Clerical worker wage) = $1,940
Table B. Estimated Annualized Respondent Burden Hours and Cost Under Item 12 for General Industry*
Collection of Information |
Frequency |
Occupation |
Number of Responses per Year |
Non-compliance Rate |
Total No. of Responses |
Burden per Response (In Hours) |
Total Burden Hour |
Loaded Hourly Wage |
Total Burden Cost (rounded) |
A. Exposure Monitoring |
|||||||||
1. Performance Option |
|||||||||
Objective Data |
Annual |
Production Worker |
0 |
0% |
0 |
30/60 |
0 |
$30.89 |
$0 |
2. Scheduled Monitoring Option |
|||||||||
Initial |
First Year |
Production Worker |
10,864 |
38% |
4,128 |
30/60 |
2,064 |
$30.89 |
$63,757 |
Periodic |
Annual |
Production Worker |
4,955 |
37% |
1,833 |
30/60 |
917 |
$30.89 |
$28,326 |
Additional |
Annual |
Production Worker |
1,086 |
38% |
413 |
30/60 |
207 |
$30.89 |
$6,394 |
B. Written Exposure Control Plan, Respiratory Protection, Medical Surveillance, and Medical Removal |
|||||||||
1. Written Exposure Control Plan |
|||||||||
Develop Plan |
First Year |
HR Manager |
3,077 |
35% |
1,077 |
8 |
8,616 |
$99.25 |
$855,138 |
Implement Plan |
First Year |
HR Manager |
43,457 |
29% |
12,603 |
30/60 |
6,302 |
$99.25 |
$625,474 |
Maintain and Update Plan |
Annual |
HR Manager |
43,457 |
29% |
12,603 |
48/60 |
10,082 |
$99.25 |
$1,000,639 |
2. Respirator Program |
|||||||||
Develop Plan |
First Year |
HR Manager |
186 |
26% |
48 |
8 |
384 |
$99.25 |
$38,112 |
Update Plan |
Annual |
HR Manager |
186 |
26% |
48 |
2 |
96 |
$99.25 |
$9,528 |
3. Respirator Fit Testing |
|||||||||
Respirator Fit Testing - Labor |
Annual |
Production Worker |
433 |
40% |
173 |
30/60 |
87 |
$30.89 |
$2,687 |
Respirator Fit Testing - Labor |
Annual |
Supervisor |
433 |
40% |
173 |
30/60 |
87 |
$47.05 |
$4,093 |
4. PPE |
|||||||||
Notify Cleaners in Writing |
Annual |
File Clerk |
2,558 |
15% |
384 |
10/60 |
65 |
$26.94 |
$1,751 |
5. Medical Surveillance |
|||||||||
Medical Exam - Initial and Periodic |
Biennial |
Production Worker |
14,598 |
28% |
4,087 |
2.08 |
8,501
|
$30.89 |
$262,596
|
6. Referral to Diagnostic Center |
|||||||||
Referral Exam - Travelling Workers |
Annual |
Production Worker |
690 |
40% |
276 |
24.25 |
6,693 |
$30.89 |
$206,747 |
Referral Exam - Non-Travelling Workers |
Annual |
Production Worker |
230 |
40% |
92 |
4.25 |
391 |
$30.89 |
$12,078 |
7. Information Provided to the PLHCP |
|||||||||
Provide Information - Supervisor |
Biennial |
Supervisor |
14,598 |
28% |
4,087 |
15/60 |
1,022 |
$47.05 |
$48,085 |
8. Licensed Physician’s Written Medical Opinion |
|||||||||
Process Information - Supervisor |
Biennial |
Supervisor |
14,598 |
28% |
4,087 |
5/60 |
341 |
$47.05 |
$16,044 |
8. Medical Removal |
|||||||||
Medical Removal |
First Year |
HR Manager |
445 |
40% |
178 |
5/60 |
15 |
$47.05 |
$706 |
C. Recordkeeping |
|||||||||
1. Exposure Monitoring |
|||||||||
Initial |
First Year |
HR Manager |
10,864 |
38% |
4,128 |
15/60 |
1,032 |
$99.25 |
$102,426 |
Periodic |
Annual |
HR Manager |
4,955 |
37% |
1,833 |
15/60 |
458 |
$99.25 |
$45,457 |
Additional |
Annual |
HR Manager |
1086 |
38% |
413 |
15/60 |
103 |
$99.25 |
$10,223 |
2. Medical Surveillance |
|||||||||
Medical Surveillance - HR Manager |
Annual |
HR Manager |
15,518 |
28% |
4,345 |
15/60 |
1,086 |
$99.25 |
$107,786 |
Medical Surveillance - Clerical |
Annual |
File Clerk |
15,518 |
28% |
4,345 |
5/60 |
362 |
$26.94 |
$9,752 |
3. Training |
|||||||||
Training |
Annual |
File Clerk |
43,457 |
26% |
11,299 |
5/60 |
942 |
$26.94 |
$25,377 |
4. Respirator Fit Testing Records |
|||||||||
Respirator Fit Testing |
Annual |
File Clerk |
433 |
40% |
173 |
5/60 |
14 |
$26.94 |
$377 |
D. Employee Access to Exposure Monitoring and Medical Records |
|||||||||
Written Exposure Control Plan |
Annual |
File Clerk |
2,173 |
29% |
630 |
5/60 |
52 |
$26.94 |
$1,401 |
Access to Records |
Annual |
File Clerk |
2,173 |
40% |
869 |
5/60 |
72 |
$26.94 |
$1,940 |
|
|||||||||
Totals |
|
|
|
|
|
|
|
|
|
First Year |
|
|
|
|
19,689 |
|
17,824 |
|
$1,627,938 |
Annual |
|
|
|
|
39,902 |
|
21,714 |
|
$1,474,556 |
Biennial |
|
|
|
|
12,261 |
|
9,864 |
|
$326,725 |
Total |
|
|
|
|
71,852 |
|
49,402 |
|
$3,429,219 |
Annualized Over Three Years20 |
|
|
|
|
52,596 |
|
32,587 |
|
$2,180,565 |
*Some numbers may differ due to rounding and the number of respondents is 4,538.
The cost estimate should be split into two components: (a) a total capital and start-up cost component (annualized over its expected useful life) and (b) a total operation and maintenance and purchase of services component. The estimates should take into account costs associated with generating, maintaining, and disclosing or providing the information. Include descriptions of methods used to estimate major cost factors including system and technology acquisition, expected useful life on capital equipment, the discount rate(s), and the time period over which costs will be incurred. Capital and start-up costs include, among other items, preparations for collecting information such as purchasing computers and software; monitoring, sampling, drilling and testing equipment; and record storage facilities.
If cost estimates are expected to vary widely, agencies should present ranges of cost burdens and explain the reasons for the variance. The cost of purchasing or contracting out information collections services should be part of this cost burden estimate. In developing cost burden estimates, agencies may consult with a sample of respondents (fewer than 10), utilize the 60-day pre-OMB submission public comment process and use existing economic or regulatory impact analysis associated with the rulemaking containing the information collection, as appropriate.
Generally, estimates should not include purchases of equipment or services, or portions thereof, made: (1) prior to October 1, 1995, (2) to achieve regulatory compliance with requirements not associated with the information collection, (3) for reasons other than to provide information or keep records for the government, or (4) as part of customary and usual business or private practices.
The agency has taken a unit cost for analyzing the samples taken for exposure monitoring. This exposure monitoring requires that three samples be taken per worker: one TWA sample and two short-term exposure limit (STEL) samples. The costs differ for initial exposure monitoring (which is conducted by certified IH) and additional/periodic monitoring (which is conducted by a lower wage IH). The unit cost for an initial TWA sample is estimated to be $617.26, which is the sum of the cost for contract industrial hygienist services ($459.95) and the associated lab fees ($157.31). The unit cost to obtain the two STEL samples is estimated to be $1,234.52 (2 x ($157.31 + $459.95)) per sampled worker. The unit cost for additional/periodic TWA samples is estimated to be $387.29, which is the sum of the cost for contract industrial hygienist services ($229.98) and the associated lab fees ($157.31). The unit cost to obtain additional/periodic STEL samples is estimated to be $774.57 (2 x ($157.31 + $229.98)).21
Table C shows the number of responses per year, non-compliance rate, and total cost associated with each type of exposure monitoring sample for general industry. The number of workers affected by the exposure monitoring requirements varies, with 10,864 workers affected in the first year, 4,955 workers subject to periodic exposure monitoring, and 1,086 workers subject to additional exposure monitoring.22 The total cost is calculated by multiplying the cost per sample by the number of non-compliance responses. First-year costs and the costs for each type of sample are summed to arrive at the total costs.
|
Table C. Direct Costs of
Exposure Monitoring* |
|
||||||
|
|
Frequency |
Responses per Year |
Non-Compliance Rate |
Non-Compliance Responses per year |
Unit Cost |
Total Cost |
|
|
Initial |
|
||||||
|
TWA Sample |
First Year |
10,864 |
38% |
4,128 |
$617.26 |
$2,548,049 |
|
|
2 STEL Samples |
First Year |
10,864 |
38% |
4,128 |
$1,234.52 |
$5,096,099 |
|
|
Subtotal |
First Year |
10,864 |
|
4,128 |
|
$7,644,148 |
|
|
Periodic |
|
||||||
|
TWA Sample |
Annual |
4,955 |
37% |
1,833 |
$387.29 |
$709,903 |
|
|
2 STEL Samples |
Annual |
4,955 |
37% |
1,833 |
$774.57 |
$1,419,787 |
|
|
Subtotal |
Annual |
4,955 |
|
1,833 |
|
$2,129,690 |
|
|
Additional |
|
||||||
|
TWA Sample |
Annual |
1,086 |
38% |
413 |
$387.29 |
$159,951 |
|
|
2 STEL Samples |
Annual |
1,086 |
38% |
413 |
$774.57 |
$319,897 |
|
|
Subtotal |
Annual |
1,086 |
|
413 |
|
$479,848 |
|
|
|
|
||||||
|
Total $10,253,686 |
|
||||||
*Samples are taken twice a year for workers between the AL and PEL and quarterly for workers above the PEL.
Total average over three years for General Industry is:
($7,644,148/3) + $2,129,690 + $479,848 = $5,157,587
For general industry, the agency assumes that employers will incur an initial medical cost for the exams associated with the medical surveillance provision. The initial medical cost associated with initial medical exams is $591.12, which includes $44.57 for gathering or updating work and medical history, $133.71 for a full physical exam (encompassing both respiratory and skin requirements), $62.82 for a pulmonary function test, $327.05 for a BeLPT, and $229.98 for all additional tests (collectively) that the PLHCP may recommend. For this last element, the agency estimates that 10 percent of the standard medical examinations will lead to further tests recommended by the PLCHP.23 The cost for the PLHCP or other medical provider to provide a written medical report to the employee is included in the cost for the medical exams.
The agency estimates that 14,598 workers in general industry will be subject to biennial medical surveillance, and OSHA estimates a non-compliance rate of 69 percent (10,073 workers) so the total cost for these workers is $5,954,352 (10,073 x $591.12). (See Table D) The cost for the additional exams is included.
Table D – Medical Exam Costs for General Industry
|
Frequency |
Basis |
Unit Cost |
Responses per Year |
Non-Compliance Rate |
Adjusted Responses |
Total Cost |
Medical Exam Costs |
Biennial |
Employee |
$591.12 |
14,598 |
28% |
4,087 |
$2,415,907 |
Total Annualized Cost: $2,415,907 ÷ 2 = $1,207,954
3. Respirator Fit-Test Materials
The agency estimates that it costs employers $1.27 for respirator materials to fit-test each of the 173 employees in general industry. This cost was not significant enough for separate identification in the FEA, but is derived from the respirator fit-test materials costs identified in the Quantitative Fit Testing Protocol: Amendment to the Final Rule on Respiratory Protection NPRM Supporting Statement.24
Annual Cost: 173 (employees) x $1.27 (cost for materials) = $220
The total costs for this item are the sum of the costs for exposure monitoring, medical examinations, and fit testing materials.
Table E – Annualization of the Final Cost
Three Year Average for the ICR (Only General Industry) |
Cost |
Exposure Monitoring |
$5,157,587 |
Medical Exams |
$1,207,954 |
Fit Testing |
$220 |
Total Cost Average over three years for General Industry |
$6,365,761 |
There are no costs to the Federal Government. The agency has no annualized cost associated with enforcing the standard. OSHA would only review records in the context of an investigation of a particular employer to determine compliance with the standard. These activities are outside the scope of the PRA. See 5 CFR 1320.4(a)(2).
OSHA is requesting an adjustment decrease from 82,822 to 32,587 hours, a difference of 50,235 hours in the burden. This decrease is the result of removing the collection of information requirements for rule familiarization from this ICR and reducing the non-compliance rate of employers.
The capital cost estimated for general industry decreased from $18,741,540 to $6,365,761. The capital cost estimate is annualized over three years. The reduction in cost is due to the change in the non-compliance rate of employers.
The information collected under the beryllium standard will not be published.
OSHA lists current valid control numbers in §§ 1910.8, 1915.8, 1917.4, 1918.4, and 1926.5 and publishes the expiration date in the Federal Register notice announcing OMB approval of the information collection requirement (see 5 CFR 1320.3(f)(3)). OSHA believes that this is the most appropriate and accurate mechanism to inform interested parties of these expiration dates.
OSHA is not requesting an exception to the certification statement.
This Supporting Statement does not contain any collection of information requirements that employ statistical methods.
1The purpose of this Supporting Statement is to analyze and describe the burden hours and costs associated with provisions of the standard that contain collections of information (paperwork) requirements. This Supporting Statement does not provide information or guidance on how to comply with, or how to enforce, these provisions.
2The agency accounts for the burden hours and costs associated with compliance with the HCS, such as the development of a hazard communication program, under the Information Collection Request (ICR) for the HCS, OMB Control No. 1218-0072.
3 The 2017 FEA tables referenced in this Supporting Statement, may be downloaded from www.reginfo.gov.
4 Source: Docket number OSHA-H005C-2006-0870-2043, Table VIII-2 of the 2017 Final Rule (82 FR at 2554). Also available at https://www.regulations.gov/document?D=OSHA-H005C-2006-0870-2042, Chapter 3, Table III-13, p. III-129.
5 Source: Employer Costs for Employee Compensation (BLS September 2023), released December 15, 2023. https://www.bls.gov/news.release/archives/ecec_12052023.pdf.
6 Although the samples are estimated to represent, on average, the exposures of four employees per sample, the sampling will typically be conducted in the direct breathing area of only a single employee per sample. Thus, the productivity loss would only affect one worker per sample.
7 Note the approved ICR estimates 5,744 abrasive blasting workers.
8 The 4,538 in-scope establishments minus 1,461 establishments in dental labs gives the 3,077 establishments that need to develop the plan.
9 This is the number of at-risk workers (50,261), less the substituting dental labs (less the 5,954 and 850 for the two substituting dental labs NAICS), totaling 43,457.
10 Source: FEA spreadsheets, Tab “Rule” (OSHA-H005C-2006-0870-2044). This number is derived from subtracting the number of substituting dental firms from the total number of firms with exposures above the PEL.
11 Source: Table V-14, Number of Workers Needing Respirators and Respirator Costs, by sector and NAICS Industry, of the FEA.
12 The 519 coal-fired power plants don’t have any beryllium-specific PPE required, so they are subtracted out of the 3,077 establishments. (3,077-519 = 2,558 establishments).
13 In the January 2017 Beryllium Final Rule, OSHA estimated that there were 21,397 total respondents for this item over all industries. (See the spreadsheets accompanying the 2017 FEA, Docket Number: OSHA-H005C-2006-0870-2044). Removing the 6,799 respondents for construction and shipyards yields 14,598 respondents in general industry. (21,397 – 6,799 = 14,598).
14 Paragraph (k)(3) provides the content of examinations.
15 These exposure monitoring unit costs are summarized in the spreadsheets accompanying the PEA for the 2017 rule (Docket number OSHA-H005C-2006-0870-0385).
16 In the current ICR, there are 778 affected employees in all industries. Removing the 333 employees in construction and maritime (see spreadsheets accompanying the 2017 shipyards and construction proposal, Docket Number: OSHA-H005C-2006-0870-0385) leaves 445 affected employees in general industry.
17 Where exposures exceed the TWA PEL or STEL, the written exposure monitoring notification shall include suspected or known sources of exposure and the corrective action(s) the employer has taken or will take to reduce exposure to or below the PELs, and where feasible corrective action exists but had not been implemented when the monitoring was conducted.
18 As discussed earlier, OSHA has estimated burdens and costs for all affected employers to conduct initial exposure monitoring rather than relying on objective data. OSHA has therefore overestimated the burden and costs for employers to the extent that any employers have developed and maintained objective data that meet the standard’s requirements and do not need to conduct initial exposure monitoring or subsequent periodic monitoring.
19 Under the Medical Surveillance section of Item 12, the agency estimates there are 690 referral examinations where workers travel on average 24.25 hours to a CBD Diagnostic Center; and 230 referral examinations where employees travel on average 4.25 hours to the CBD Diagnostic center.
20 Annualized Over Three Years is equal to [(First year total/3) + (Biennial total/2) + Annual total].
21 These exposure monitoring unit costs are summarized in the spreadsheets accompanying the PEA for the 2017 rule (Docket Number OSHA-H005C-2006-0870-0385).
22 The derivation of the number of affected workers is described in Section 12 above.
23These medical exams unit costs are summarized in Table V-19 of the FEA.
24 Respiratory Protection QNFT NPRM supporting statement, published Oct. 7, 2016, available at https://www.reginfo.gov/public/do/PRAViewDocument?ref_nbr=201511-1218-005, p. 27.
| File Type | application/vnd.openxmlformats-officedocument.wordprocessingml.document |
| File Modified | 0000-00-00 |
| File Created | 0000-00-00 |