Crosswalk: Appendix A1

MIPS QCDR and Qualified Registry Self-Nomination User Guide
Calendar Year 2023 Final versus Calendar Year 2024 Final
Burden impact: The changes to this self-nomination user guide reflect proposals in the
Calendar Year (CY) 2024 Physician Fee Schedule Final Rule for the Quality Payment Program
and result in an estimated change of zero hours as the initial 2024 MIPS QCDR and Qualified
Registry Self-Nomination User Guide was published prior to the release of the CY2024
Physician Fee Schedule Final Rule for the Quality Payment Program.
*****
Change #1:
Location: Cover Page
Reason for Change:
Alignment with current year requirement.
CY 2023 Final Rule text:
Section Header- 2023 Merit-Based Incentive Payment System (MIPS) Program: SelfNomination User Guide for Qualified Clinical Data Registries (QCDRs) and Qualified Registries
CY 2024 Final Rule text:
Section Header - 2024 Merit-Based Incentive Payment System (MIPS) Program: SelfNomination User Guide for Qualified Clinical Data Registries (QCDRs) and Qualified Registries
*****
Change #2:
Location: Cover Page
Reason for Change:
Alignment with current year requirement.
CY 2023 Final Rule text:
Publication date: June 2022
CY 2024 Final Rule text:
Publication date: June 2023
*****
Change #3:
Location: Page 1
Reason for Change:
Alignment with current year requirement.
CY 2023 Final Rule text:
Table of Contents
CY 2024 Final Rule text:
Table of Contents

*****
Change #4:
Location: Page 3
Reason for Change:
Alignment with current year requirement.
CY 2023 Final Rule text:
Purpose
The 2023 Self-Nomination User Guide provides prospective Qualified Clinical Data Registries
(QCDRs) and Qualified Registries with guidance on how to self-nominate for the 2023
performance period of the Merit-Based Incentive Payment System (MIPS) program. The intent
of the guide is to provide entities with step-by-step instructions on the information needed to
populate and submit a completed Self-Nomination form for the Centers for Medicare & Medicaid
Services (CMS) consideration.
CY 2024 Final Rule text:
Purpose
The 2024 Self-Nomination User Guide provides Qualified Clinical Data Registries (QCDRs) and
Qualified Registries with guidance on how to self-nominate for the 2024 performance period of
the Merit-based Incentive Payment System (MIPS) program. The intent of the guide is to
provide intermediaries with step-by-step instructions on the information needed to populate and
submit a completed Self-Nomination form for consideration by the Centers for Medicare &
Medicaid Services (CMS).
*****
Change #5:
Location: Page 3,4
Reason for Change: Alignment with current year requirement, updates to align with PIMMS
User Guide, update to language.
CY 2023 Final Rule text:
Background
The Self-Nomination form is available through the CMS Quality Payment Program (QPP)
website and should be accessed, completed, and submitted by entities seeking to participate in
the 2023 MIPS performance period as a QCDR and/or Qualified Registry.
The QCDR and Qualified Registry Self-Nomination form contains the following tabs (please
note, you are required to populate all required fields marked with an asterisk (*) and tabs prior
to submitting your Self-Nomination form for CMS review):
•
•

Intermediary Contact Info tab – Intermediaries are required to enter their demographic
and contact information.
Intermediary Details tab – Intermediaries are required to enter their participation
details.

•

•
•
•

•

•

•

•

Qualified Posting Details tab – Intermediaries are required to enter their cost
information, services included in cost, last date to accept new clients, reporting
information/supported, data collection methods, reporting frameworks, MIPS Value
Pathways (MVPs) supported, and performance categories. A qualified posting is
developed for the approved QCDRs/Qualified Registries and include organization type,
specialties, previous participation in MIPS (if applicable), program status (remedial
action taken against the QCDR/Qualified Registry or terminated as a third-party
intermediary, if applicable), contact information, last date to accept new clients, virtual
groups specialty parameters (if applicable), the approved measures, reporting
frameworks/performance categories/MVPs supported, services offered, and costs
incurred by clients. All approved QCDRs/Qualified Registries are included in the
Qualified Posting that is posted on the CMS QPP Resource Library.
Attestations tab – Intermediaries are required to attest that they understand and are
able to meet the participation requirements for the 2023 MIPS performance period.
Improvement Activities tab – Intermediaries are required to select the improvement
activities supported for the 2023 MIPS performance period. For more information, please
see the 2022 MIPS Improvement Activities User Guide.
Promoting Interoperability tab – Intermediaries are required to select the Promoting
Interoperability objectives and measures supported for the 2023 MIPS performance
period. For the Promoting Interoperability performance category, if the MIPS eligible
clinician, group, virtual group, or subgroup1 is using certified electronic health record
technology (CEHRT); the third-party intermediary may be excepted from this
requirement if ALL its MIPS eligible clinicians, groups, virtual groups, or subgroups fall
under the reweighting policies. Health Information Technology (IT) vendors are required
to submit data for at least one category. For more information, please see the 2022
MIPS Promoting Interoperability User Guide.
MIPS Clinical Quality Measure (CQM) tab – Intermediaries are required to select the
individual MIPS CQMs supported for the 2023 MIPS performance period. QCDRs and
Qualified Registries must support at least six quality measures, with at least one
outcome measure. If an outcome measure is not available, at least one other high
priority measure should be used. Please note, some MIPS CQMs are also available as
MIPS electronic clinical quality measures (eCQMs) and should be used as specified.
Changes to the measure specifications are not permitted.
MIPS electronic Clinical Quality Measure (eCQM) tab – Intermediaries may specify
the eCQMs supported for the 2023 MIPS performance period. Please note, some MIPS
eCQMs are also available as MIPS CQMs and should be used as specified. Changes to
the measure specifications are not permitted.
MIPS Value Pathway (MVP) tab – Intermediaries may specify the MVPs supported for
the 2023 MIPS performance period. Please note, the list of MVPs reflects what is
finalized in the CY 2022 Physician Fee Schedule Final Rule for the QPP. MVP
availability is subject to change, based upon what is finalized for inclusion and removal
in the CY 2023 Physician Fee Schedule Final Rule for the QPP. In addition, voluntary,
opt-ins, and virtual groups are currently excluded from MVP reporting.
Data Validation tab – Intermediaries are required to specify the methodology that they
will use to validate the data submitted for the 2023 MIPS performance period.

Please refer to the 2023 QCDR Fact Sheet located in the QPP Resource Library for additional
information on the QCDR participation requirements. The 2023 QCDR Fact Sheet is included in
the 2023 Self-Nomination Toolkit.

Please refer to the 2023 Qualified Registry Fact Sheet located in the QPP Resource Library for
additional information on the Qualified Registry participation requirements. The 2023 Qualified
Registry Fact Sheet is included in the 2023 Self-Nomination Toolkit.
The QCDR Self-Nomination form contains the following additional tabs (please note, you are
required to populate all required fields marked with an asterisk (*) and tabs prior to submitting
your Self-Nomination form for CMS review):
•
•

Benchmarking Capabilities tab (optional) – Allows QCDRs to upload their
benchmarking methodology.
QCDR Measures tab (optional) – Allows QCDRs to provide QCDR measures and/or
supplemental QCDR measure documentation for consideration for the 2023
performance period. To utilize this QCDR measures tab your intermediary must choose
‘Yes’ under the “Do you plan to submit QCDR Measures?” question on the Intermediary
Details tab to submit your QCDR measures. Please note, QCDRs who plan to submit
QCDR measures for CMS consideration, must complete this tab.

To be considered for the 2023 MIPS performance period, prospective QCDRs and/or Qualified
Registries will be required to submit their complete Self-Nomination form (inclusive of MIPS
quality measures, QCDR measures (QCDRs only), and data validation) by 8 p.m. ET on
September 1, 2022. Intermediaries who intend on participating in MIPS as a QCDR and
Qualified Registry must complete and submit a Self-Nomination form for each
intermediary type for the 2023 MIPS performance period. CMS will only approve the
organization for the intermediary type identified within the Self-Nomination form. Applicants will
not be able to update or submit their self-nomination after the deadline. CMS will not review late
submissions.
Failure to meet participation requirements and/or the falsification of any information provided
during self-nomination, may result in remedial action being taken against the QCDR and/or
Qualified Registry, or termination as a QCDR and/or Qualified Registry in the current and future
program years of MIPS.
CMS will post two qualified postings for the 2023 MIPS performance period, one for approved
QCDRs and another for approved Qualified Registries. MIPS eligible clinicians, groups, virtual
groups, subgroups, or Alternative Payment Model (APM) Entities, inclusive of voluntary and optin participants may utilize the qualified postings to select a CMS-approved QCDR or Qualified
Registry as their method of data submission for MIPS reporting.
Additional resources regarding the 2023 MIPS performance period can be found on the QPP
websitehttp://www.qpp.cms.gov/.
CY 2024 Final Rule text:
Background
The Self-Nomination form is available through the CMS Quality Payment Program (QPP) selfnomination website and should be accessed, completed, and submitted by intermediaries

seeking to participate in the 2024 MIPS performance period as a QCDR and/or Qualified
Registry.
The QCDR and Qualified Registry Self-Nomination form contains the following tabs (please
note, you are required to populate all required fields marked with an asterisk (*) and tabs prior
to submitting your Self-Nomination form for CMS review):
•
•
•

Intermediary Contact Info tab – Intermediaries are required to enter their staff access
and contact information.
Intermediary Details tab – Intermediaries are required to enter their current and
previous MIPS program participation details.
Qualified Posting Details tab – A qualified posting is developed for the approved
QCDRs/Qualified Registries and are required to include:
o Contact information,
o Cost information,
o Services included in cost,
o Last date to accept new clients,
o Reporting information/supported,
o Data collection methods,
o Reporting frameworks,
o MIPS Value Pathways (MVPs) supported,
o Performance categories supported,
o Organization type,
o Specialty,
o Previous years of participation in MIPS (if applicable),
o Virtual groups specialty parameters (if applicable),
o The approved activities and measures,

The Qualified Posting is posted on the CMS QPP Resource Library.
•
•
•

•

Attestations tab – Intermediaries are required to attest that they understand and are
able to meet the participation requirements for the 2024 MIPS performance period.
Improvement Activities tab – Intermediaries are required to select and support the
improvement activities supported for the 2024 MIPS performance period. For more
information, please see the 2023 MIPS Improvement Activities User Guide
Promoting Interoperability tab – Intermediaries are required to select and support the
Promoting Interoperability objectives and measures for the 2024 MIPS performance
period. For the Promoting Interoperability performance category, if the MIPS eligible
clinician, group, virtual group, or subgroup1 is using certified electronic health record
technology (CEHRT); the third party intermediary may be excepted from this
requirement if ALL its MIPS eligible clinicians, groups, virtual groups, or subgroups fall
under the reweighting policies. Health Information Technology (IT) vendors are required
to submit data for at least 1 category. For more information, please see the 2023 MIPS
Promoting Interoperability User Guide.
MIPS Clinical Quality Measure (CQM) tab – Intermediaries are required to select and
support the reporting of quality measures. The MIPS CQM is a collection type available
to intermediaries to support for the 2024 MIPS performance period. For Traditional
MIPS, QCDRs and Qualified Registries must support at least 6 quality measures, with at
least 1 outcome measure. If an outcome measure is not available, at least 1 other high
priority measure should be used. For MVPs, QCDRs and Qualified Registries must

•

•

•

support all the MIPS quality measures (that require data submission) available in the
MVP they intend to support. Some MIPS CQMs are also available as MIPS electronic
Clinical Quality Measures (eCQMs) and must be programmed and implemented as
specified in the technical measure specifications. Changes to the measure
specifications or implementation workflows by intermediaries are not permitted.
MIPS electronic Clinical Quality Measure (eCQM) tab – Intermediaries may specify
the eCQMs supported for the 2024 MIPS performance period. Some MIPS eCQMs are
also available as MIPS CQMs and should be programmed and implemented as specified
in the technical measure specifications. Changes to the measure specifications or
implementation workflows by intermediaries are not permitted.
MIPS Value Pathway (MVP) tab – Intermediaries may specify the MVPs they’ll support
for the 2024 MIPS performance period. The list of MVPs reflects what was finalized in
the CY2023 Medicare Physician Fee Schedule (PFS) Final Rule. MVP availability is
subject to change, based upon what is finalized for inclusion and removal in the CY2024
Medicare Physician Fee Schedule (PFS) Final Rule. Intermediaries will be given the
opportunity to update the specified MVPs after the CY2024 Medicare Physician Fee
Schedule (PFS) Final Rule has been published. In addition, voluntary and opt-in
participants, as well as virtual groups are currently excluded from MVP reporting.
Data Validation tab – Intermediaries are required to specify the methodology that they’ll
use to validate the data submitted for the 2024 MIPS performance period.

Please refer to the 2024 QCDR Fact Sheet located in the QPP Resource Library for additional
information on the QCDR participation requirements. The 2024 QCDR Fact Sheet is included in
the 2024 Self-Nomination Toolkit.
Please refer to the 2024 Qualified Registry Fact Sheet located in the QPP Resource Library for
additional information on the Qualified Registry participation requirements. The 2024 Qualified
Registry Fact Sheet is included in the 2024 Self-Nomination Toolkit.
The QCDR Self-Nomination form contains the following additional tabs (You’re required to
populate all required fields marked with an asterisk (*) and tabs prior to submitting your SelfNomination form for CMS review):
•
•

Benchmarking Capabilities tab (required) – Allows QCDRs to upload their
benchmarking methodology. CMS won’t use a QCDR’s benchmarking data to establish
a MIPS benchmark.
QCDR Measures tab (optional) – Allows QCDRs to provide QCDR measures and/or
supplemental QCDR measure documentation for consideration for the 2024 MIPS
performance period. To utilize the QCDR measures tab, your intermediary must choose
‘Yes’ under the “Do you plan to submit QCDR Measures?” question on the Intermediary
Details tab to submit your QCDR measures. QCDRs who plan to submit QCDR
measures for CMS consideration, must complete this tab.

To be considered for the 2024 MIPS performance period, QCDRs and/or Qualified Registries
will be required to submit their complete Self-Nomination form, inclusive of QCDR measures
(QCDRs only) by 8 p.m. ET on September 1, 2023. Intermediaries who intend to participate in
MIPS as a QCDR and/or Qualified Registry must complete and submit a Self-Nomination
form for each intermediary type for the 2024 MIPS performance period. CMS will only
approve the organization for the intermediary type identified within the Self-Nomination form.

Applicants won’t be able to update or submit their self-nomination after the deadline. CMS won’t
review late submissions.
Failure to meet participation requirements and/or the falsification of any information provided
during self-nomination, may result in remedial action being taken against the QCDR and/or
Qualified Registry, or termination as a QCDR and/or Qualified Registry in the current and future
program years of MIPS.
CMS will post 2 qualified postings for the 2024 MIPS performance period (one for approved
QCDRs and a second for approved Qualified Registries). MIPS eligible clinicians, groups,
virtual groups, subgroups, or Alternative Payment Model (APM) Entities, inclusive of voluntary
and opt-in participants or MVP participants may use the qualified postings to select a CMSapproved QCDR or Qualified Registry as their method of data submission for MIPS reporting.
Additional resources regarding the 2024 MIPS performance period can be found on the QPP
website.
*****
Change #6:
Location: Page 6-14
Reason for Change:
Alignment with current year requirement, updates to align with PIMMS User Guide.
CY 2023 Final Rule text:
Accessing the Quality Payment Program Website
Sign Up for a Quality Payment Program Account
If you do not have a user account, you must create a user account.
1. Review the QPP Access User Guide (zip) that contains these files:
a. QPP Access at a Glance - Gives an overview of what you need to do to sign in to
http://www.qpp.cms.gov and how you will manage access to organizations you
want to access to self-nominate.
b. Register for a Health Care Quality Information Systems (HCQIS) Access Roles
and Profile (HARP) Account - Gives step-by-step instructions with screenshots
for new users (those who have never signed into http://www.qpp.cms.gov) to
create an account.
c. Connect to an Organization - Gives step-by-step instructions with screenshots for
any user to request authorization for an organization. Follow these steps if you
need to self-nominate for an organization that is currently submitting on the QPP
website. This includes organizations that qualify for the simplified SelfNomination form. You may need to connect to the organizations that you need to
self-nominate.
d. Security Officials: Manage Access - Gives step-by-step instructions with
screenshots for a small group of users (those with a Security Official role) to
approve requests to access their organization. Follow these steps if you need to
self-nominate for an organization that is currently submitting on the QPP website.
This includes organizations that qualify for the simplified Self-Nomination form.

2.
3.
4.

5.
6.
7.

8.
9.
10.

You may need to request the Security Official role for the organizations that you
need to self-nominate.
Navigate to the QPP website.
Click on Register.
Click on “Register with HARP” to create your account. This process could take 5-15
minutes depending on how quickly your data is verified. HARP uses a third-party
service provided by Experian to verify your identity. This may require your social
security number. Please select the “Security Official” role.
If you are self-nominating for a new intermediary that is not currently active on the
QPP website, then you are done.
If you are self-nominating for an existing intermediary that is active on the QPP
website, then you will need to connect to that organization and request the “Security
Official” role.
Once you have created an account and logged in, you will land on the Manage
Access page in the QPP website and will see the “Registry/QCDR Self-Nomination”
link to access the Self-Nomination form for QCDRs/Qualified Registries. You will see
the organizations that you are connected to listed on the Manage Access page. If you
are not seeing an existing intermediary that is active on the QPP website that you
need to self-nominate, then you will need to click on “Connect to an Organization” and
connect to that organization and request the “Security Official” role.
Log in to the QPP website.
Select “Sign In.”
Enter your User Identifier (ID) and Password, check the “Yes, I agree” box, and click
the “Sign In” button.

Please note, you must have the “Security Official” role assigned to access, complete, and
submit the Self-Nomination form for your organization(s). If you do not have the “Security
Official” role, please submit a request to your organization’s “Security Official” via the QPP
website. If you are the “Security Official” for your organization, you may add this role to the
appropriate staff via the QPP website. Users can request access as a “Security Official” on the
Manage Access page by clicking the “Connect to another Organization” link. You will be able to
identify the QCDRs/Qualified Registries where the “Security Official” role has been approved as
they are listed on the Manage Access page. The list of organizations that you can selfnominate will match the list of organizations displayed on the Manage Access page under the
Registry option (QCDR/Qualified Registry entities). If you know the organization that you need
to self-nominate is active on the QPP website and it is missing from this list, then you need to
follow the steps above to “Connect to an Organization” in the “Security Official” role.
Please note that sharing HARP account credentials with other users is not permitted and
is considered a security violation. Each individual user must have their own HARP
account to log in to the QPP website. Unauthorized or improper use of this system is
prohibited and may result in disciplinary action and/or civil and criminal penalties.
CY 2024 Final Rule text:
Accessing the Quality Payment Program Website
Sign Up for a Quality Payment Program Account

If you don’t have a user account, you must create a user account.
1. Review the QPP Access User Guide (ZIP Size 4151KB) that contains these files:
a. QPP Access at a Glance - Gives an overview of what you need to do to sign in to
QPP website and how you will manage access to organizations you want to
access to self-nominate.
b. Register for a Health Care Quality Information Systems (HCQIS) Access Roles
and Profile (HARP) Account - Gives step-by-step instructions with screenshots
for new users (those who have never signed into https://qpp.cms.gov/) to create
an account.
c. Connect to an Organization - Gives step-by-step instructions with screenshots for
any user to request authorization for an organization. Follow these steps if you
need to self-nominate for an organization that is currently submitting on the QPP
website. This includes organizations that qualify for the simplified SelfNomination form. You may need to connect to the organizations that you need to
self-nominate.
d. Security Officials: Manage Access - Gives step-by-step instructions with
screenshots for a small group of users (those with a Security Official role) to
approve requests to access their organization. Follow these steps if you need to
self-nominate for an organization that is currently submitting on the QPP website.
This includes organizations that qualify for the simplified Self-Nomination form.
You may need to request the Security Official role for the organizations that you
need to self-nominate.
2. Navigate to the QPP website.
3. Click on Register.
4. Click on ‘Register with HARP’ to create your account. This process could take 5-15
minutes depending on how quickly your data is verified. HARP uses a third-party
service provided by Experian to verify your identity. This may require your social
security number. Please select the ‘Security Official’ role.
5. If you’re self-nominating for a new intermediary that isn’t currently active on the QPP
website, then you’re done.
6. If you’re self-nominating for an existing intermediary that is active on the QPP website,
then you’ll need to connect to that organization and request the “Security Official” role.
7. Once you’ve created an account and logged in, you’ll land on the Manage Access
page in the QPP website and will see the ‘Registry/QCDR Self-Nomination’ link to
access the Self-Nomination form for QCDRs/Qualified Registries. You’ll see the
organizations that you’re connected to listed on the Manage Access page. If you
aren’t seeing an existing intermediary that is active on the QPP website that you need
to self-nominate, then you’ll need to click on ‘CONNECT TO ORGANIZATION and
connect to that organization and request the ‘Security Official’ role.
8. Log in to the QPP website.
9. Select ‘Sign in’.
10. Enter your User Identifier (ID) and Password, check the “Yes, I agree” box, and click
the ‘Sign in’ button.
You must have the ‘Security Official’ role assigned to access, complete, and submit the SelfYou must have the ‘Security Official’ role assigned to access, complete, and submit the SelfNomination form for your organization(s). If you don’t have the ‘Security Official’ role, please

submit a request to your organization’s ‘Security Official’ via the QPP website. If you’re the
‘Security Official’ for your organization, you may add this role to the appropriate staff via the
QPP website. Users can request access as a ‘Security Official’ on the Manage Access page by
clicking the ‘CONNECT TO ORGANIZATION’ link. You’ll be able to identify the
QCDRs/Qualified Registries where the ‘Security Official’ role has been approved as they’re
listed on the Manage Access page. The list of organizations that you can self-nominate will
match the list of organizations displayed on the Manage Access page under the Registry
option (QCDR/Qualified Registry intermediaries). If you know the organization that you need to
self-nominate is active on the QPP website and it’s missing from this list, then you need to
follow the steps above to ’CONNECT TO ORGANIZATION’ in the ‘Security Official’ role.
Sharing HARP account credentials with other users isn’t permitted and is considered a
security violation. Each individual user must have their own HARP account to log in to
the QPP website. Unauthorized or improper use of this system is prohibited and may
result in disciplinary action and/or civil and criminal penalties.
*****
Change #7:
Location: Page 15, 16
Reason for Change:
Alignment with current year requirement, updates to align with PIMMS style guide.
CY 2023 Final Rule text:

Self-Nomination Form Tips

Please consider the following tips as you prepare to self-nominate:
•

•
•

•
•

QCDRs and Qualified Registries must enter and maintain a Health Insurance
Portability and Accountable Act (HIPAA) compliant Business Associate Agreement
(BAA) with its participating MIPS eligible clinicians, groups, virtual groups,
subgroups, or APM Entities, inclusive of voluntary and opt-in participants that
provides for receipt of patient-specific data. The BAA must account for the disclosure
of quality measure results, numerator and denominator data, and/or patient-specific
data on Medicare and non-Medicare patients on behalf of MIPS eligible clinicians,
groups, virtual groups, subgroups, or APM Entities, inclusive of voluntary and opt-in
participants.
All prospective QCDRs and Qualified Registries must complete and submit their SelfNomination form via the QPP website. No other Self-Nomination form submission
methods will be accepted.
Prepare the information needed to complete the Self-Nomination form, measure
information and Data Validation in advance of the attempt to self-nominate via the
QPP website. Please note, that the system will log you out after 30 minutes of
inactivity.
A third party intermediary’s principal place of business and retention of associated
CMS data must be within the U.S. Please note, CMS policy prohibits non-U.S.
citizens from accessing CMS IT systems.
The time required to complete this information collection is estimated to average
twelve hours per Self-Nomination form, including the time to review instructions,
search existing data resources, gather the data needed, and complete and review
the Self-Nomination form.

•
•

•

•

•
•
•

All fields marked with a red asterisk (*) are required.
You will not be able to successfully submit a self-nomination unless all the required
fields of all tabs have been filled out. However, once submitted, you may go back
and edit your submission until 8 p.m. ET on September 1, 2022. Do not click
“SUBMIT FOR REVIEW” until all the required fields of all tabs have been
completed.
Comment functionality is available in the Self-Nomination tool. It may be used for
specifying any updates or informing CMS about any changes that have been applied
to the self-nomination or QCDR measures. Refer to “Comments” section of this User
Guide for additional information.
Please contact the MIPS QCDR/Registry Support Team (PIMMS Team) at
[email protected] or [email protected], if you cannot
find your simplified Self-Nomination form instead of creating and submitting a new
Self-Nomination form for your organization.
Please ensure that a member of your organization has a QPP account with the
appropriate associated role at all times and that appropriate coverage is in place if
the lead self-nomination contact person is out of the office.
If an error message is generated while in the QPP self-nomination website, you
should try refreshing the page and/or clearing your cache.
If you have questions about the 2023 Self-Nomination form, please contact the QPP
Service Center at 1-866-288-8292 or by email at: [email protected] (Monday
through Friday from 8 a.m. to 8 p.m. ET). To receive assistance more quickly, please
consider calling during non-peak hours, before 10 a.m. and after 2 p.m. ET.
Customers who are hearing impaired can dial 711 to be connected to a TRS
Communications Assistant.

CY 2024 Final Rule text:
Self-Nomination Form Tips
Please consider the following tips as you prepare to self-nominate:
•

•
•
•

QCDRs and Qualified Registries must enter and maintain a Health Insurance Portability
and Accountable Act (HIPAA) compliant Business Associate Agreement (BAA) with its
participating MIPS eligible clinicians, groups, virtual groups, subgroups, or APM Entities,
inclusive of voluntary and opt-in participants that provides for receipt of patient-specific
data. The BAA must account for the disclosure of quality measure results, numerator
and denominator data, and/or patient-specific data on Medicare and non-Medicare
patients on behalf of MIPS eligible clinicians, groups, virtual groups, subgroups, or APM
Entities, inclusive of voluntary, opt-in participants, and MVP participants.
All QCDRs and Qualified Registries must complete and submit their Self-Nomination
form via the QPP website. No other Self-Nomination form submission methods will be
accepted.
Prepare the information needed to complete the Self-Nomination form and data
validation in advance of the attempt to self-nominate via the QPP website. The system
will log you out after 30 minutes of inactivity.
A third party intermediary’s principal place of business and retention of associated CMS
data must be within the U.S. CMS policy prohibits non-U.S. citizens from accessing CMS
IT systems.

•

•
•

•

•

•
•
•

The time required to complete this information collection is estimated to average 12
hours per Self-Nomination form, including the time to review instructions, search existing
data resources, gather the data needed, and complete and review the Self-Nomination
form.
All fields marked with a red asterisk (*) are required.
You won’t be able to successfully submit a self-nomination unless all the required fields
of all tabs have been filled out. However, once submitted, you may go back and edit your
submission until 8 p.m. ET on September 1, 2023. Don’t click ‘SUBMIT FOR
REVIEW’ until all the required fields of all tabs have been completed.
Comment functionality is available in the Self-Nomination tool. It may be used for
specifying any updates or informing CMS about any changes that have been applied to
the self-nomination or QCDR measures. Refer to ‘Comments’ section of this user guide
for additional information.
Please contact the MIPS QCDR/Registry Support Team (Practice Improvement and
Measures Management Support (PIMMS) Team) at
[email protected] or [email protected], if you can’t
find your simplified Self-Nomination form instead of creating and submitting a
new Self-Nomination form for your organization.
Please ensure that a member of your organization has a QPP account with the
appropriate associated role at all times and that appropriate coverage is in place if
the lead self-nomination contact person is out of the office.
If an error message is generated while in the QPP self-nomination website, you should
try refreshing the page and/or clearing your cache.
If you have questions about the 2023 Self-Nomination form, please contact the QPP
Service Center at 1-866-288-8292 or by email at: [email protected] (Monday through
Friday from 8 a.m. to 8 p.m. ET). To receive assistance more quickly, please consider
calling during non-peak hours, before 10 a.m. and after 2 p.m. ET. Customers who are
hearing impaired can dial 711 to be connected to a TRS Communications Assistant.

*****
Change #8:
Location: Page 16-18
Reason for Change: Updates to align with PIMMS style guide.
CY 2023 Final Rule text:
Creating a Self-Nomination Form (prospective QCDRs/Qualified Registries)
1. Click “Registry/QCDR Self-Nomination” under Manage Access.
2. Click “Add New Intermediary.”
3. Enter your intermediary name (to be displayed on Qualified Posting) and indicate your
prospective QCDR’s or Qualified Registry’s intermediary type. Please ensure you have
selected the correct intermediary type, as this may affect your application. If you would
like to self-nominate to become both a QCDR and Qualified Registry, you must complete
an application for each intermediary type.
4. Click “Save & Continue.”
5. Add ‘Watchers’ to monitor the status of your Self-Nomination form. This feature allows
entities to create a list of users who should receive email notification when comments
and/or status changes are provided. Please note, make sure the ‘watcher(s)’ you
provide are kept current to prevent delays with your self-nomination.

CY 2024 Final Rule text:
Creating a Self-Nomination Form (prospective QCDRs/Qualified Registries)
1. Click ’Registry/QCDR Self-Nomination' under Manage Access.
2. Click ‘Add New Intermediary’.
3. Enter your intermediary name (to be displayed on qualified posting) and indicate your
QCDR’s or Qualified Registry’s intermediary type. Please ensure you’ve selected the
correct intermediary type, as this may affect your application. If you would like to selfnominate to become both a QCDR and Qualified Registry, you must complete an
application for each intermediary type.
4. Click ‘Save & Continue’.
5. Add ‘Watchers’ to monitor the status of your Self-Nomination form. This feature allows
intermediaries to create a list of users who should receive email notifications when
comments and/or status changes are provided. Make sure the ‘watcher(s)’ you provide
are kept current to prevent delays with your self-nomination.
*****
Change #9:
Location: Page 19-20
Reason for Change:
Updates to align with PIMMS Style Guide
CY 2023 Final Rule text:
Creating a Self-Nomination Form (existing QCDRs/Qualified Registries not in good
standing)
Find your intermediary name in the list on the Intermediary landing page with the SelfNomination Form “Partially Renewed” status.
If you are not seeing an intermediary that you know is active on the QPP website, please refer
to the Intermediary Not Listed link for instructions on how to connect to that organization via the
Manage Access page.
1. Click on “Intermediary Not Listed” button.
2. Follow the directions provided in the “Intermediary Not Listed?” pop-up window.
CY 2024 Final Rule text:
Creating a Self-Nomination Form (existing QCDRs/Qualified Registries not in good
standing)
Find your intermediary name in the list on the Intermediary landing page with the Self
Nomination Form ‘Partially Renewed’ status.
If you aren’t seeing an intermediary that you know is active on the QPP website, please refer to
the Intermediary Not Listed link for instructions on how to connect to that organization via the
Manage Access page.
1. Click on the ‘INTERMEDIARY NOT LISTED’ button.
2. Follow the directions provided in the “Intermediary Not Listed?” pop-up window.
*****

Change #10:
Location: Page 21, 22
Reason for Change:
Alignment with current year requirement, updates to align with PIMMS Style Guide.
CY 2023 Final Rule text:
Populating the 2023 Self-Nomination Form
Disclaimer: A majority of the screenshots used in this section of the User Guide were taken from
the QCDR Self-Nomination form. Corresponding fields of the Qualified Registry Self-Nomination
form may slightly differ.
Please note, the “Populating the 2023 Self-Nomination Form” process should be completed by
prospective QCDRs/Qualified Registries or existing QCDRs/Qualified Registries that currently
are not in good standing (i.e., have remedial action taken against the intermediary). Existing
QCDRs/Qualified Registries in good standing may refer to the “Populating the 2023 Simplified
Self-Nomination Form” section of the User Guide for information on self-nominating for the 2023
MIPS performance period. Existing QCDRs/Qualified Registries in good standing should contact
the MIPS QCDR/Registry Support Team (PIMMS Team) at [email protected] or
[email protected] if they cannot find or access the simplified Self-Nomination
form instead of submitting a new Self-Nomination form.
All input placed into the form is automatically saved when you move to the next field. If you
cannot complete the Self-Nomination form in one session, you may click the “Save & Close”
button on the Self-Nomination form and come back to it later.
You may navigate between the Self-Nomination form tabs by clicking the appropriate tab on the
left-hand side of the screen or at the bottom of the screen.
CY 2024 Final Rule text:
Populating the 2024 Self-Nomination Form
Disclaimer: A majority of the screenshots used in this section of the user guide were taken from
the QCDR Self-Nomination form. Corresponding fields of the Qualified Registry Self-Nomination
form may slightly differ.
The ‘Populating the 2024 Self-Nomination Form’ process should be completed by prospective
QCDRs/Qualified Registries or existing QCDRs/Qualified Registries that currently aren’t in good
standing (i.e., remedial action was taken against the intermediary). Existing QCDRs/Qualified
Registries in good standing may refer to the ’Populating the 2024 Simplified Self-Nomination
form’ section of the user guide for information on self-nominating for the 2023 MIPS
performance period. Existing QCDRs/Qualified Registries in good standing should contact the
MIPS QCDR/Registry Support Team (PIMMS Team) at [email protected] or
[email protected] if they can’t find or access the simplified Self-Nomination
form instead of submitting a new Self-Nomination form.
All input placed into the form is automatically saved when you move to the next field. If you can’t
complete the Self-Nomination form in one session, you may click the ‘Save & Close’ button on
the Self-Nomination form and come back to it later.
You may navigate between the Self-Nomination form tabs by clicking the appropriate tab on the
left-hand side of the screen or at the bottom of the screen.

*****
Change #11:
Location: Page 22, 23
Reason for Change:
Alignment with current year requirements, updates to align with PIMMS Style Guide, removal of
Physician Care Compare language.
CY 2023 Final Rule text:
Populating the 2023 Simplified Self-Nomination Form
A Simplified Self-Nomination form is available to reduce the burden of self-nomination for those
existing QCDRs/Qualified Registries that have previously participated in MIPS and are in good
standing (remedial action has not been taken against the intermediary). A Simplified SelfNomination form is available only for existing QCDRs and Qualified Registries in good standing
with minimal changes, and those with substantive changes as described below. Existing
QCDRs/Qualified Registries in good standing should contact the MIPS QCDR/Registry Support
Team (PIMMS Team) at [email protected] and
[email protected] if they cannot find or access the Simplified Self-Nomination
form instead of submitting a new Self-Nomination form.
•

•

QCDR/Qualified Registry with minimal changes – existing QCDRs/Qualified
Registries in good standing that would like to submit minimal changes to their previously
approved Self-Nomination form from the previous year and may submit these changes,
and attest to no additional changes from their previously approved QCDR/Qualified
Registry Self-Nomination form, for CMS review and consideration during the selfnomination period, from July 1 and September 1. Minimal changes include but are not
limited to:
o Limited changes to the supported performance categories.
o Adding or removing MIPS quality measures.
o Reporting frameworks.
o MVPs supported.
o Promoting Interoperability measures.
o Improvement activities.
o Adding or updating existing services offered.
o Cost associated with using the QCDR/Qualified Registry.
QCDR/Qualified Registry with substantive changes – existing QCDRs/Qualified
Registries in good standing, may also submit for CMS review and approval, updates to a
QCDRs/Qualified Registries data validation, or a change in the organization structure
that would impact any aspect of the QCDR/Qualified Registry. Substantive changes
impacting the organizational structure should be communicated to CMS as soon as
possible. Suggestions for new MIPS quality measures should go through the Annual Call
for Measures process and updates to the existing MIPS quality measures should be
submitted to the existing measure’s steward. QCDRs/Qualified Registries are not
allowed to submit or create new MIPS quality measures during self-nomination.

You may begin your 2023 Simplified Self-Nomination form by clicking “Get Started” on the selfnomination landing page. Please note, that existing QCDRs and Qualified Registries that are
eligible for the Simplified Self-Nomination form will see a nomination status of “Renewed.”

Please note, the new fields in the 2023 Self-Nomination form, fields that are now required or
include validation for a specific format (i.e., telephone number), will need to be populated or
updated for the Self-Nomination form to pass validation and be successfully submitted.
2022 QPP performance period information will be available for public reporting on Care
Compare starting in late 2023. If you have any questions about this, please contact the Care
Compare support team at: [email protected].
CY 2024 Final Rule text:
Populating the 2024 Simplified Self-Nomination Form
A Simplified Self-Nomination form is available to reduce the burden of self-nomination for those
existing QCDRs/Qualified Registries that have previously participated in MIPS and are in good
standing (remedial action hasn’t been taken against the intermediary). A Simplified SelfNomination form is available only for existing QCDRs and Qualified Registries in good standing
with minimal changes, and those with substantive changes as described below. Existing
QCDRs/Qualified Registries in good standing should contact the MIPS QCDR/Registry Support
Team (PIMMS Team) at [email protected] and
[email protected] if they can’t find or access the Simplified Self-Nomination
form (instead of submitting a new Self-Nomination form).
• QCDR/Qualified Registry with minimal changes – existing QCDRs/Qualified Registries in
good standing that would like to submit minimal changes to their previously approved SelfNomination form from the previous year may submit these changes (and attest to no additional
changes from their previously approved QCDR/Qualified Registry Self-Nomination form) for
CMS review and consideration during the self-nomination period, from July 1 and September 1.
Minimal changes include but aren’t limited to:
o Limited changes to the supported performance categories.
o Adding or removing MIPS quality measures.
o Reporting frameworks.
o MVPs supported.
o Promoting Interoperability measures.
o Improvement activities.
o Adding or updating existing services offered.
o Cost associated with using the QCDR/Qualified Registry
• QCDR/Qualified Registry with substantive changes – existing QCDRs/Qualified Registries
in good standing may also submit for CMS review and approval, updates to a QCDR’s/Qualified
Registry’s data validation, or a change in the organizational structure that would impact any
aspect of the QCDR/Qualified Registry. Substantive changes impacting the organizational
structure should be communicated to CMS as soon as possible. Suggestions for new MIPS
quality measures should go through the Annual Call for Measures process and updates to the
existing MIPS quality measures should be submitted to the existing measure’s steward.
QCDRs/Qualified Registries aren’t allowed to submit or create new MIPS quality measures
during self-nomination.
You may begin your 2024 Simplified Self-Nomination form by clicking ‘Get Started’ on the selfnomination landing page. Existing QCDRs and Qualified Registries that are eligible for the
Simplified Self-Nomination form will see a nomination status of ’Renewed’.

The new fields in the 2024 Self-Nomination form (fields that are now required or include
validation for a specific format (i.e., telephone number)) will need to be populated or updated for
the Self-Nomination form to pass validation and be successfully submitted.
*****
Change #12:
Location: Page 24-29
Reason for Change:
Alignment with current year requirement, update to terms
CY 2023 Final Rule text:
Intermediary Contact Info
1. Enter the name of your prospective QCDR or Qualified Registry (if different from the
intermediary name) and your organization’s tax identification number (TIN). The
intermediary name will be used as your QCDR or Qualified Registry name for CMS
purposes. Please provide if your organization will be participating as both intermediary types
(i.e., QCDR/Qualified Registry) for the 2023 MIPS performance period. The “Intermediary
Staff Access” field will ONLY be seen if the Self-Nomination form is for a new intermediary.
List QPP email addresses for any additional staff at your organization who need to have
access to the Self-Nomination form. To access an existing intermediary’s Self-Nomination
form, additional users must be connected to that organization as a “Security Official” role.
2. Enter the mailing address for your prospective QCDR or Qualified Registry.
3. Enter the prospective QCDR’s or Qualified Registry’s contact information (i.e., Phone
Number and Website). The “Phone Number” field should be populated as (XXX) XXXXXXX.
4. Enter information for a program, clinical, and technical contact. Please note, you are
required to provide three unique points of contact (POCs) for these three fields. Entering
only one POC or different email addresses for the same POC (i.e., the same name is
entered for program and clinical contact with two different email addresses) is not
acceptable. If you would like to add additional POCs to be included in the email distribution
to receive program announcements and support call information (if approved), please add
the email address(es) in the “Additional Contacts” field.
5. Please note, this contact information will only be used in relation to your potential
participation in the program. To ensure notices are received, please have these contacts
add the QPP to their safe/approved senders list.
CY 2024 Final Rule text:
Intermediary Contact Info
1. Enter the name of your QCDR or Qualified Registry (if different from the intermediary name)
and your organization’s tax identification number (TIN). The intermediary name will be used
as your QCDR or Qualified Registry name for CMS purposes. Please indicate if your
organization will be participating as both intermediary types (i.e., QCDR/Qualified Registry)
for the 2024 MIPS performance period. The ‘Intermediary Staff Access’ field will ONLY be
seen if the Self Nomination form is for a new intermediary. List email addresses for any
additional staff at your organization who need to have access to the Self-Nomination form.

To access an existing intermediary’s Self-Nomination form, additional users must be
connected to that organization as a ‘Security Official’ role.
2. Enter the mailing address for your QCDR or Qualified Registry.
3. Enter the QCDR’s or Qualified Registry’s contact information (i.e., Phone Number and
Website). The ’Phone Number’ field should be populated as (XXX) XXX-XXXX.
4. Enter information for a program, clinical, and technical contact. You’re required to provide 3
unique points of contact (POCs) for these 3 fields. Entering only 1 POC or different email
addresses for the same POC (i.e., the same name is entered for the program and clinical
contact with 2 different email addresses) isn’t acceptable. If you would like to add additional
POCs to be included in the email distribution to receive program announcements and
support call information (if approved), please add the email address(es) in the ‘Additional
Contact Email(s)’ field.
This contact information will only be used in relation to your potential participation in the
program. To ensure notices are received, please have these contacts add the QPP email to
their safe/approved senders list.
*****
Change #13:
Location: Page 29-32
Reason for Change:
Alignment with current year requirement, updates to align with PIMMS User Guide.
CY 2023 Final Rule text:
Intermediary Details
1. Click the Intermediary Details tab.
2. Indicate your prospective QCDR’s or Qualified Registry’s intermediary type. If “Health IT
Vendor” or “Other” is selected, please specify.
3. Indicate if this is a new or existing QCDR or Qualified Registry that participated under MIPS
and Physician Quality Reporting System (PQRS). Select all applicable years your
prospective QCDR or Qualified Registry has participated in MIPS and/or PQRS as a QCDR
or Qualified Registry.
4. Has your intermediary participated as a QCDR or Qualified Registry during the last two
performance periods and submitted any MIPS data on behalf of clinicians, groups, virtual
groups, subgroups, or APM Entities, inclusive of voluntary and opt-in participants? Please
select Yes or No. If your intermediary chooses “No”, your intermediary must populate the
self-nomination participation plan section.
5. Enter any other aliases or acronyms your prospective QCDR or Qualified Registry currently
uses or has used for participation as a QCDR or Qualified Registry in previous program
periods.
6. Please indicate your prospective QCDR or Qualified Registry’s related clinical specialty(ies).
7. Does the prospective QCDR plan to submit QCDR measures? Please select Yes or No
(QCDRs only). To populate the QCDR Measures tab your intermediary must choose ‘Yes’
under the “Do you plan to submit QCDR Measures?” question to submit your QCDR
measures for CMS consideration.
8. Does the prospective QCDR plan to risk adjust the quality measures data that is integrated
with the measure specifications? Please select Yes or No (QCDRs only). Upload your Risk
Adjustment Plan in the “file uploads” section. Please note, do NOT upload the attachment in
the comment section.

9. Describe how your prospective QCDR meets the definition of a QCDR. Please note,
reiterating CMS’s definition of a QCDR does not suffice as justification as to how your
prospective QCDR meets the definition. Please describe in detail your prospective
QCDR’s clinical expertise and quality measure development experience, partnerships or
collaborations, patient and/or disease tracking capability, method(s) used to foster quality
improvement, and evidence of meeting the identified deficiencies to meet the definition of a
QCDR (if applicable) (QCDRs Only).
Please refer to the 2023 QCDR Self-Nomination Fact Sheet for more detailed information on
what is required.

CY 2024 Final Rule text:
Intermediary Details
1. Click the Intermediary Details tab.
2. Indicate your QCDR’s or Qualified Registry’s intermediary type. If ‘Health IT Vendor’ or
‘Other’ is selected, please specify.
3. Indicate if this is a new or existing QCDR or Qualified Registry that participated under MIPS
and Physician Quality Reporting System (PQRS). Select all the applicable years your QCDR
or Qualified Registry participated in MIPS and/or PQRS as a QCDR or Qualified Registry. If
you change intermediary type, your organization is considered as ‘new’ for the given MIPS
performance period. If you’re an existing intermediary, you will be required to answer the
next question regarding your participation during the last 2 performance periods and the
submission of MIPS data.
4. Indicate whether or not your intermediary has participated as a QCDR or Qualified Registry
during the last 2 MIPS performance periods by selecting ‘Yes’ or ‘No’.
5. If ‘Yes’ is selected for the question above, did your intermediary not submit any MIPS data
for either of the 2 years preceding the applicable self-nomination period on behalf of
clinicians, groups, virtual groups, subgroups, or APM Entities, inclusive of voluntary, opt-in,
and/or MVP participants? If ‘No’ is selected, no further information is needed. If ‘Yes’ is
selected, provide a detailed self-nomination participation plan on how your intermediary
plans to encourage clinicians, groups, virtual groups, subgroups, or APM Entities, inclusive
of voluntary, opt-in, and/or MVP participants, to submit MIPS data to CMS and why you
should still be able to participate as a qualified intermediary going forward.
6. Enter any other aliases or acronyms your QCDR or Qualified Registry currently uses or has
used for participation as a QCDR or Qualified Registry in previous performance periods.
7. Please indicate your QCDR or Qualified Registry’s related clinical specialty(ies).
8. Does the QCDR plan to submit QCDR measures? Please select ‘Yes’ or ‘No’ (QCDRs only).
To populate the QCDR Measures tab, your intermediary must choose ‘Yes’ under the “Do
you plan to submit QCDR Measures?” question to submit your QCDR measures for CMS
consideration.
9. Describe how your QCDR meets the definition of a QCDR. Reiterating CMS’s definition of a
QCDR doesn’t suffice as justification as to how your QCDR meets the definition. Please
describe in detail your QCDR’s clinical expertise and quality measure development
experience, partnerships or collaborations, patient and/or disease tracking capability,
method(s) used to foster quality improvement, and evidence of meeting the identified
deficiencies to meet the definition of a QCDR (if applicable) (QCDRs Only).
Please refer to the 2024 QCDR Self-Nomination Fact Sheet for more detailed information on
what is required.
*****
Change #14:
Location: Page 33-37
Reason for Change:
Alignment with current year requirement, update to terms, updates to align with PIMMS Style
Guide.
CY 2023 Final Rule text:

Qualified Posting Details
1. Click the Qualified Posting Details tab.
2. Indicate the cost information as well as the type of services your prospective QCDR or
Qualified Registry provides. If approved, this information will be included in the prospective
QCDR’s or Qualified Registry’s qualified posting. Please include frequency (monthly,
annual, per submission), and if the cost is per provider/practice. Make sure to provide in
detail the differences in cost/services in each Self-Nomination form, if you are an
intermediary that selected ‘Yes’ to self-nominate as both a QCDR and Qualified Registry in
the Intermediary Contact Info tab.
3. Indicate the latest date your prospective QCDR or Qualified Registry can accept new clients.
Please add the date as MM/DD/YYYY. The performance period starts on January 1, 2023,
and ends December 31, 2023. As a reminder, data submissions begin January 2, 2024, and
end on April 1, 2024.
• Indicate the data collection method(s) your prospective QCDR or Qualified Registry
supports, select the performance category(ies) you will be supporting, and which
reporting options you will support. If “Other” is selected, please specify the data
collection method in the corresponding field. The quality and improvement activities
performance categories are grayed out as your prospective QCDR or Qualified Registry
must support quality and improvement activities. Please note, QCDRs and Qualified
Registries that submit data are REQUIRED to support the quality, Promoting
Interoperability and improvement activities performance categories. A third party
intermediary could be excepted from Promoting Interoperability if ALL its MIPS
eligible clinicians, groups, virtual groups, and/or subgroups, fall under the
reweighting policies. For more information, please see the 2022 MIPS Promoting
Interoperability User Guide.
• Indicate which reporting frameworks you will support for your MIPS eligible clinicians to
participate as individual clinicians, groups, virtual groups, subgroups, or APM Entities,
inclusive of voluntary and opt-in participants. QCDRs and Qualified Registries must
support MVPs that are relevant to the specialties supported. QCDRs and Qualified
Registries may also support the APM Performance Pathway (APP).
CY 2024 Final Rule text:
Qualified Posting Details
1. Click the Qualified Posting Details tab.
2. Indicate the cost information as well as the type of services your QCDR or Qualified Registry
provides. If approved, this information will be included in the QCDR’s or Qualified Registry’s
qualified posting. Please include frequency (monthly, annual, per submission), if the cost is
per provider/practice, and if there’s a different cost for supporting Traditional MIPS
compared to MVPs. Make sure to provide in detail the differences in cost/services in each
Self-Nomination form, if you are an intermediary that selected ‘Yes’ to self-nominate as both
a QCDR and Qualified Registry in the Intermediary Contact Info tab.
3. Indicate the latest date your QCDR or Qualified Registry can accept new clients. Please add
the date as MM/DD/YYYY. The performance period starts January 1, 2024, and ends
December 31, 2024. As a reminder, data submissions begin January 2, 2025, and end on
April 1, 2025.
 Indicate the data collection method(s) your QCDR or Qualified Registry supports,
select the performance category(ies) you’ll be supporting, and which reporting
options you’ll support. If ‘Other’ is selected, please specify the data collection method

in the corresponding field. The quality and improvement activities performance
categories are grayed out as your QCDR or Qualified Registry must support quality
and improvement activities. QCDRs and Qualified Registries that submit data are
REQUIRED to support the quality, Promoting Interoperability and improvement
activities performance categories. A third party intermediary could be excepted from
Promoting Interoperability if ALL its MIPS eligible clinicians, groups, virtual groups,
and/or subgroups, fall under the reweighting policies. For more information, please
see the 2023 MIPS Promoting Interoperability User Guide.
 Indicate which reporting options and participation options you’ll support for your
MIPS eligible clinicians to participate as individual clinicians, groups, virtual groups,
subgroups or APM Entities, inclusive of voluntary, opt-in, and/or MVP participants.
QCDRs and Qualified Registries must support MVPs that are relevant to the
specialties supported. An intermediary may be excepted from supporting MVPs if
none of the approved MVPs for the given MIPS performance period are relevant to
the specialties supported. QCDRs and Qualified Registries may also support the
APM Performance Pathway (APP).
*****
Change #15:
Location: Page 37-41
Reason for Change:
Alignment with current year requirements, updated language, updates to align with PIMMS
Style Guide
.
CY 2023 Final Rule text:
Attestations
1. Click the Attestations tab.
2. Review the “Participation” statement and enter your name to attest that your prospective
QCDR or Qualified Registry meets the participation requirements. In addition, please review
and answer the self-nomination attestation questions and indicate if your prospective QCDR
or Qualified Registry is able to meet these program requirements. To be considered, a
prospective QCDR or Qualified Registry must attest “Yes” to all the self-nomination
attestations.
Please note, these attestations include the acceptance of data exports directly from an EHR or
other data sources. If you become aware that any submitted information is not true, accurate,
and complete, you will correct such issues promptly prior to submission, or refrain from
submitting it.
CY 2024 Final Rule text:
Attestations
1. Click the Attestations tab.
2. Review the ’Participation’ statement and enter your name to attest that your QCDR or
Qualified Registry meets the participation requirements. In addition, please review and
answer the self-nomination attestation questions and indicate if your QCDR or Qualified
Registry is able to meet these program requirements. To be considered, a QCDR or
Qualified Registry must attest ’Yes’ to all the self-nomination attestations.
These attestations include the acceptance of data exports directly from an Electronic Health
Record (EHR) or other data sources. If you become aware that any submitted information isn’t

true, accurate, and complete, you’ll correct such issues promptly prior to submission or refrain
from submitting it.
*****
Change #16:
Location: Page 41, 42
Reason for Change:
Alignment with current year requirements, and update to align term.
CY 2023 Final Rule text:
Improvement Activities
1. Click the Improvements Activities tab.
2. You may select “All” or “Some.” The list of supported improvement activities will appear if
“Some” is selected. For more information, please see the 2022 Improvement Activities User
Guide.
3. You may select each improvement activity you will support from the list of all the
improvement activities. A list will display and update after each individual improvement
activity is selected. Select “All”, instead of selecting each improvement activity from the drop
down if you will support all the improvement activities.
4. You may remove a selected individual improvement activity by clicking the “X” next to each
selected improvement activity or click “Clear all” to remove all the selected improvement
activities. In addition, you may use the “Search” function to look-up specific improvement
activities.
5. To edit your improvement activities, refer to the “Modifying a Self-Nomination” section of this
User Guide.
CY 2024 Final Rule text:
Improvement Activities
1. Click the Improvements Activities tab.
2. You may select ‘All’ or ‘Some’. The list of supported improvement activities will appear if
‘Some’ is selected. For more information, please see the 2023 Improvement Activities User
Guide. Improvement activity availability is subject to change, based upon what’s finalized for
inclusion and removal in the CY 2024 Medicare Physician Fee Schedule (PFS) Final Rule
3. You may select each improvement activity you’ll support from the list of all the improvement
activities. A list will display and update after each individual improvement activity is selected.
Select ’All’, instead of selecting each improvement activity from the drop down, if you will
support all the improvement activities.
4. You may remove a selected individual improvement activity by clicking the ‘X’ next to each
selected improvement activity or click ‘Clear all’ to remove all the selected improvement
activities. In addition, you may use the ‘Search’ function to look-up specific improvement
activities.
5. To edit your improvement activities, refer to the ‘Modifying a Self-Nomination’ section of this
user guide.
*****
Change #17:
Location: Page 42-44
Reason for Change: Alignment with current year requirements, update to align with PIMMS
Style Guide, and update to align term.

CY 2023 Final Rule text:
Promoting Interoperability
1. Click the Promoting Interoperability tab.
2. You may select “All”, “Some”, or “None.” The list of supported Promoting Interoperability
objectives and measures will appear if “Some” is selected. Please note, a third party
intermediary could be excepted from Promoting Interoperability if ALL its MIPS eligible
clinicians, groups, virtual groups, or subgroups fall under the reweighting policies. If you
select “None”, please make sure you uncheck “Promoting Interoperability” under the
Reporting Options section on the Qualified Posting Details tab. A field will display for your
intermediary to provide an attestation of the exception criteria. For more information, please
see the 2022 MIPS Promoting Interoperability User Guide.
3. You may select each Promoting Interoperability you will support from the list of all the
Promoting Interoperability objectives and measures. Each individual objective or measure
selected will show after each objective or measure is selected. Select “All”, instead of
selecting each Promoting Interoperability objective and measure from the drop down if you
will support all the Promoting Interoperability objectives and measures.
4. You may remove a selected objective or measure by clicking the “X” next to each selected
objective or measure or click “Clear all” to remove all the selected objectives or measures. In
addition, you may use the “Search” function to look-up specific objectives or measures.
5. To edit your objectives or measures, refer to the “Modifying a Self-Nomination” section of
this User Guide.
CY 2024 Final Rule text:
Promoting Interoperability
1. Click the Promoting Interoperability tab.
2. You may select ‘All’, ‘Some’, or ‘None’. The list of supported Promoting Interoperability
objectives and measures will appear if ‘Some’ is selected. Promoting Interoperability
objectives and measures availability is subject to change, based upon what is finalized for
inclusion and removal in the CY 2024 Medicare Physician Fee Schedule (PFS) Final Rule. A
third party intermediary could be excepted from Promoting Interoperability if ALL its MIPS
eligible clinicians, groups, virtual groups, or subgroups fall under the reweighting policies. If
you select ‘None’, please make sure you uncheck ‘Promoting Interoperability’ under the
Reporting Options section on the Qualified Posting Details tab. A field will display for your
intermediary to provide an attestation of the exception criteria. For more information, please
see the 2023 MIPS Promoting Interoperability User Guide. You may select each Promoting
Interoperability measure you will support from the list of all the Promoting Interoperability
objectives and measures. Each individual objective or measure selected will show after
each objective or measure is selected. Select ‘All’, instead of selecting each Promoting
Interoperability objective and measure from the drop down if you will support all the
Promoting Interoperability objectives and measures.
3. You may remove a selected objective or measure by clicking the ’X’ next to each selected
objective or measure or click ‘Clear all’ to remove all the selected objectives or measures. In
addition, you may use the ‘Search’ function to look up specific objectives or measures.
4. To edit your objectives or measures, refer to the ‘Modifying a Self-Nomination’ section of this
user guide.
Change #18:
Location: Page 44, 45

Reason for Change: Alignment with current year requirements, update to align with PIMMS
Style Guide, and update to align term.
CY 2023 Final Rule text:
MIPS Clinical Quality Measures
1. Click the MIPS Clinical Quality Measures (CQMs) tab.
2. You may select “All”, “Some”, or “None.” The list of individual MIPS CQMs will appear if
“Some” is selected. Please note that the MIPS CQM must be used as specified. Measure
specification changes are not permitted.
3. You may select each MIPS CQM you will support from the list of all the MIPS CQMs. Each
MIPS CQM selected will show after each measure is selected. Select “All”, instead of
selecting each MIPS CQM from the drop down if you will support all the MIPS CQMs.
4. You may remove a selected MIPS CQM by clicking the “X” next to each selected measure
or click “Clear all” to remove all the selected measures. In addition, you may use the
“Search” function to look-up specific measures.
5. To edit your individual MIPS CQMs, refer to the “Modifying a Self-Nomination” section of this
User Guide.
CY 2024 Final Rule text:
MIPS Clinical Quality Measures
1. Click the MIPS Clinical Quality Measures (CQMs) tab.
2. You may select ‘All’, ‘Some’, or ‘None’. The list of individual MIPS CQMs will appear if ‘Some’ is
selected. The MIPS CQM must be used as specified. Measure specification changes aren’t
permitted. MIPS CQM availability is subject to change, based upon what’s finalized for inclusion
and removal in the CY 2024 Medicare Physician Fee Schedule (PFS) Final Rule.
3. You may select each MIPS CQM you’ll support from the list of all the MIPS CQMs. Each MIPS
CQM selected will show after each measure is selected. Select ‘All’, instead of selecting each
MIPS CQM from the drop down if you’ll support all the MIPS CQMs.
4. You may remove a selected MIPS CQM by clicking the ‘X’ next to each selected measure or click
‘Clear all’ to remove all the selected measures. In addition, you may use the ‘Search’ function to
look up specific measures.
5. To edit your individual MIPS CQMs, refer to the ’Modifying a Self-Nomination’ section of this
user guide.
Change #19:
Location: Page 45-47
Reason for Change: Alignment with current year requirements, update to align with PIMMS
Style Guide, and update to align term.

CY 2023 Final Rule text:
MIPS electronic Clinical Quality Measures
1. Click the MIPS electronic Clinical Quality Measures (eCQMs) tab.
2. You may select “All”, “Some”, or “None.” The list of individual MIPS eCQMs will appear if
“Some” is selected. Please note, the MIPS eCQM must be used as specified. Measure
specification changes are not permitted.
3. You may select each eCQM you will support from the list of all the eCQMs. Each MIPS
eCQM selected will show after each measure is selected. Select “All”, instead of selecting
each MIPS eCQM from the drop down if you will support all the MIPS eCQMs.

4. You may remove a selected MIPS eCQM by clicking the “X” next to each selected measure
or click “Clear all” to remove all of the selected measures. In addition, you may use the
“Search” function to look-up specific measures.
5. To edit your individual MIPS CQMs, refer to the “Modifying a Self-Nomination” section of this
User Guide.
CY 2024 Final Rule text:
MIPS electronic Quality Measures
1. Click the MIPS electronic Clinical Quality Measures (eCQMs) tab.
2. You may select ‘All’, ‘Some’, or ’None’. The list of individual eCQMs will appear if ‘Some’ is
selected. The eCQM must be used as specified. Measure specification changes aren’t
permitted. eCQM availability is subject to change, based upon what’s finalized for inclusion
and removal in the CY 2024 Medicare Physician Fee Schedule (PFS) Final Rule.
3. You may select each eCQM you’ll support from the list of all the eCQMs. Each eCQM
selected will show after each measure is selected. Select ‘All’, instead of selecting each
eCQM from the drop down if you’ll support all the eCQMs.
4. You may remove a selected eCQM by clicking the ’X’ next to each selected measure or click
‘Clear all’ to remove all the selected measures. In addition, you may use the ‘Search’
function to look up specific measures.
5. To edit your individual eCQMs, refer to the ‘Modifying a Self-Nomination section of this user
guide.

Change #20:
Location: Page 47-49
Reason for Change: Alignment with current year requirements, update to align with PIMMS
Style Guide, and update to align term.
CY 2023 Final Rule text:
MIPS Value Pathway (MVP)
1. Click the MIPS Value Pathway (MVP) tab.
2. You may select “All”, “Some”, or “None.” The list of individual MVPs will appear if “Some” is
selected. Please note, the list of MVPs reflects what is finalized in the CY 2022 Physician
Fee Schedule Final Rule for the QPP. MVP availability is subject to change, based upon
what is finalized for inclusion and removal in the CY 2023 Physician Fee Schedule Final
Rule for the QPP.
3. You may select each MVP you will support from the list of all currently available MVPs. Each
MVP selected will show after one is selected. Select “All”, instead of selecting each
individual MVP from the drop down if you will support all the MVPs. Please note, QCDRs
are expected to support all QCDR measures within an MVP and should obtain permission to
borrow the QCDR measure(s) from the applicable QCDR measure owner(s).
4. You may remove a selected MVP by clicking the “X” next to each selected MVP or click
“Clear all” to remove all the selected MVPs. In addition, you may use the “Search” function
to look-up specific MVPs.
5. To edit your individual MVPs, refer to the “Modifying a Self-Nomination” section of this User
Guide.

CY 2024 Final Rule text:
MIPS Value Pathway (MVP)
1. Click the MIPS Value Pathway (MVP) tab.
2. You may select ‘All’, ’Some’, or ‘None’. The list of individual MVPs will appear if ‘Some’ is
selected. The list of MVPs reflects what’s finalized in the CY 2023 Medicare Physician Fee
Schedule (PFS) Final Rule. MVP availability is subject to change, based upon what’s
finalized for inclusion and removal in the CY 2024 Medicare Physician Fee Schedule (PFS)
Final Rule. Intermediaries will be given the opportunity to update the specified MVPs after
the CY2024 Medicare Physician Fee Schedule (PFS) Final Rule has been published.
3. You may select each MVP you’ll support from the list of all currently available MVPs. Each
MVP selected will show after 1 is selected. Select ‘All’, instead of selecting each individual
MVP from the drop down if you’ll support all the MVPs. Intermediaries are expected to
support all MIPS quality measures, improvement activities, Promoting Interoperability
objectives and measures within an MVP but not all the collection types or QCDR measures.
QCDRs should obtain permission to borrow the QCDR measure(s) from the applicable
QCDR measure owner(s).
4. You may remove a selected MVP by clicking the ‘X’ next to each selected MVP or click
‘Clear all’ to remove all the selected MVPs. In addition, you may use the ‘Search’ function to
look up specific MVPs.
5. To edit your individual MVPs, refer to the ‘Modifying a Self-Nomination’ section of this user
guide.
Change #21:
Location: Page 49-54
Reason for Change: Alignment with current year requirements, update to align with PIMMS
Style Guide, and update to align term.
CY 2023 Final Rule text:
Data Validation
On this tab, you will be asked to specify the methodology your prospective QCDR, or Qualified
Registry will use for validating the data being submitted to CMS for traditional MIPS and MVP
reporting. All fields are required to be populated. The data validation strategy must be
populated into the pre-formulated fields in the Self-Nomination form. CMS will only review the
information populated in the pre-formulated fields for purposes of satisfying the data
validation strategy. Please note, execution of your data validation strategy must be
completed prior to the 2023 data submission period for all performance categories
supported, so errors can be corrected prior to data submission for the 2023 MIPS
performance period. All data that is eligible to be submitted for purposes of the MIPS program
(traditional MIPS, MVP reporting) should be subject to validation, regardless of whether they are
MIPS eligible clinicians, groups, virtual groups, subgroup, or APM Entities, inclusive of voluntary
and opt-in participants. Please note, voluntary, opt-ins, and virtual groups are currently
excluded from MVP reporting.
Populating Data Validation

1. Describe how your prospective QCDR or Qualified Registry will verify MIPS eligibility for
each clinician, group, virtual group, subgroup, or APM Entity, inclusive of voluntary and/or
opt-in participant (i.e., verify all participation categories meet the eligibility thresholds).
Please note, MIPS eligible clinician, group, virtual group, subgroup, or APM Entity,
inclusive of voluntary and opt-in participants self-attestation does not suffice.
2. Indicate the method your prospective QCDR or Qualified Registry will use to verify the
accuracy of TINs and/or National Provider Identifiers (NPIs) intended for submission (i.e.,
CMS National Plan and Provider Enumeration System (NPPES), CMS claims, and/or tax
documentation). Please note, each MIPS eligible clinician, group, virtual group,
subgroup, or APM Entity, inclusive of voluntary and opt-in participants selfattestation does not suffice.
3. Describe the method your prospective QCDR or Qualified Registry will use to accurately
calculate reporting and performance rates (i.e., formulas included in the quality measure
specifications).
4. Describe the system your prospective QCDR or Qualified Registry will use to verify that only
2023 versions of MIPS quality measures, QCDR measures, MVPs, improvement activities,
and Promoting Interoperability measures are reported for MIPS submission.
5. Describe the process used for completion of the data validation audit of a subset of data
prior to the submission to CMS. Periodic examinations may be completed to compare
patient record data with submitted data and/or ensure the MIPS measures were accurately
reported based on the appropriate measure specifications (that is, accuracy of numerator,
denominator, and exclusion criteria). The QCDR/Qualified Registry must provide their
sampling methodology that would be used to conduct the audits. The QCDR or Qualified
Registry, at a minimum must meet the following sampling methodology to meet participation
requirements: Sample 3% of the TIN-NPIs submitted to CMS, with a minimum of 10 TINNPIs or a maximum sample of 50 TIN-NPIs. At least 25% of the TIN-NPI’s patients (with a
minimum sample of 5 patients or a maximum sample of 50 patients) should be reviewed for
all measures applicable to the patient. Please note, the data validation audit and targeted
audit are not the same audit. See further details in targeted audit section.
6. Describe the process used for completion of a targeted audit if data validation inaccuracies
are identified during the data validation audit. Please note, targeted audit and data
validation audit are not the same type of audit. The targeted audit should include a
description of the root cause analysis, how the error was corrected, and the percentage of
your total MIPS eligible clinicians, groups, virtual groups, subgroups, or APM Entities,
inclusive of voluntary and opt-in participants impacted by the data error. Please note, the
sample used for auditing in the targeted audit must not include data used for the data
validation audit in which the deficiency or data error was identified (i.e., select an additional
3% sample in addition to the MIPS eligible clinicians, groups, virtual groups, subgroups, or
APM Entities, inclusive of voluntary and opt-in participants impacted by the identified error).
The aspect of the audit that is considered “the detail” is the specific error you are auditing
for.
CY 2024 Final Rule text:
Data Validation
On this tab, you’ll be asked to specify the methodology your QCDR, or Qualified Registry will
use for validating the data being submitted to CMS for traditional MIPS, APP and MVP
reporting. All fields are required to be populated. The data validation strategy must be populated

into the pre-formulated fields in the Self-Nomination form. CMS will only review the information
populated in the pre-formulated fields for purposes of satisfying the data validation strategy.
Execution of your data validation strategy must be completed prior to the 2024 data submission
period for all performance categories supported, so errors can be corrected prior to data
submission for the 2024 MIPS performance period. All data that’s eligible to be submitted for
purposes of the MIPS program (traditional MIPS, MVP reporting, or APP) should be subject to
validation, regardless of whether they’re MIPS eligible clinicians, groups, virtual groups,
subgroups, or APM Entities, inclusive of voluntary, opt-in, and/or MVP participants. Voluntary,
opt-ins, and virtual groups are currently excluded from MVP reporting.
Populating Data Validation
1. Describe how your QCDR or Qualified Registry will verify MIPS eligibility for each clinician,
group, virtual group, subgroup, or APM Entity, inclusive of voluntary, opt-in, and/or MVP
participant (i.e., verify all participation categories meet the eligibility thresholds). A MIPS
eligible clinician, group, virtual group, subgroup, or APM Entity, inclusive of voluntary, opt-in,
and/or MVP participants’ self-attestation, doesn’t suffice.
2. Indicate the method your QCDR or Qualified Registry will use to verify the accuracy of TINs
and/or National Provider Identifiers (NPIs) intended for submission (i.e., CMS National Plan
and Provider Enumeration System (NPPES), CMS claims, and/or tax documentation). Each
MIPS eligible clinician, group, virtual group, subgroup, or APM Entity, inclusive of voluntary,
opt-in, and/or participants’ self-attestation, doesn’t suffice.
3. Describe the method your QCDR or Qualified Registry will use to accurately calculate
reporting and performance rates (i.e., formulas included in the quality measure
specifications).
4. Describe the system your QCDR or Qualified Registry will use to verify that only 2024
versions of MIPS quality measures, QCDR measures, MVPs, improvement activities, and
Promoting Interoperability measures are reported for MIPS submission.
5. Describe the process used for completion of the data validation audit of a subset of data
prior to the submission to CMS. Periodic examinations may be completed to compare
patient record data with submitted data and/or ensure the MIPS measures were accurately
reported based on the appropriate measure specifications (that is, accuracy of numerator,
denominator, and exclusion criteria). The QCDR/Qualified Registry must provide their
sampling methodology that would be used to conduct the audits. The QCDR or Qualified
Registry, at a minimum must meet the following sampling methodology to meet participation
requirements: Sample 3% of the TIN/NPIs submitted to CMS, with a minimum of 10
TIN/NPIs or a maximum sample of 50 TIN/NPIs. At least 25% of the TIN/NPI’s patients (with
a minimum sample of 5 patients or a maximum sample of 50 patients) should be reviewed
for all measures applicable to the patient. The data validation audit and targeted audit aren’t
the same audit. See further details in targeted audit section.
6. Describe the process used for completion of a targeted audit if data validation inaccuracies
are identified during the data validation audit. A Targeted audit and data validation audit
aren’t the same type of audit. The targeted audit should include a description of the root
cause analysis, how the error was corrected, and the percentage of your total MIPS eligible
clinicians, groups, virtual groups, subgroups, or APM Entities, inclusive of voluntary, opt-in,
and MVP participants, that were impacted by the data error. The sample used for auditing in
the targeted audit mustn’t include data used for the data validation audit in which the
deficiency or data error was identified (i.e., select an additional 3% sample in addition to the
MIPS eligible clinicians, groups, virtual groups, subgroups, or APM Entities, inclusive of
voluntary, opt-in, and/or MVP participants, that were impacted by the identified error). The
aspect of the audit that’s considered ‘the detail’ is the specific error for which you’re auditing.

Change #22:
Location: Page 54-56
Reason for Change: Alignment with current year requirements, updates to align with PIMMS
Style Guide.
CY 2023 Final Rule text:
Benchmarking Capabilities
(QCDR ONLY)
This tab is optional and should ONLY be used by QCDRs if they are submitting QCDR
Benchmarking Capabilities for CMS consideration.
1. Indicate whether you have benchmarking capability (QCDR only). Upload your
benchmarking plan in the “file uploads” section if ‘Yes’ is selected. Please note, do NOT
upload the attachment in the comment section.
CY 2024 Final Rule text:
Benchmarking Capabilities (QCDR ONLY)
This tab is optional and should ONLY be used by QCDRs for CMS consideration.
1. Indicate whether you have benchmarking capability (QCDR only). Upload your benchmarking
plan in the ‘file uploads’ section if ‘Yes’ is selected. Don’t upload the attachment in the comment
section.
Change #23:
Location: Page 56, 57
Reason for Change: Alignment with current year requirements, updates to align with PIMMS
Style Guide.
CY 2023 Final Rule text:
QCDR Measures (QCDR ONLY)
This tab is optional and should ONLY be used by QCDRs if they are submitting QCDR
measures for CMS consideration.
QCDR measures are required to be submitted using the QCDR Measures tab. This tab should
ONLY be filled out by QCDRs who meet the definition of a QCDR, are self-nominating as a
QCDR for 2023, and wish to self-nominate QCDR measures for CMS consideration.
Each QCDR may self-nominate a maximum of 30 QCDR measures for CMS consideration.
QCDR measures may be approved for 2 years, at CMS discretion, by attaining approval status
and meeting QCDR measure considerations and requirements. Upon annual review, CMS may
revoke the QCDR measure second year approval, if the QCDR measure is found to be:
• Topped out.
• Duplicative of a more robust measure.
• Reflects outdated clinical guideline.

•

The QCDR measure steward is no longer in good standing or participating as a QCDR.

Existing QCDRs (in good standing) will be provided a pre-populated QCDR Measures tab which
includes their 2022 MIPS performance period approved QCDR measure specifications. The
pre-populated QCDR measures (for existing QCDRs in good standing only) will be added to
each existing QCDR’s respective 2023 Simplified Self-Nomination form in the QPP website.
Please note, pre-populated QCDR measures will need to be updated to include information for
the new required fields.
In addition, any updates to previously approved QCDR measure specifications from the 2022
MIPS performance period will need to be included in the QCDR measure submission for CMS
consideration. Furthermore, QCDRs in good standing may also submit new QCDR measures
for CMS consideration for the 2023 MIPS performance period.
In instances where a QCDR believes a low-reported QCDR measure that did not meet
benchmarking thresholds is still important and relevant to a specialist’s practice, the QCDR may
develop and submit a QCDR measure participation plan for CMS consideration. This QCDR
measure participation plan must include the QCDR’s detailed plans and changes to encourage
MIPS eligible clinicians, groups, virtual groups, subgroups, or APM Entities, inclusive of
voluntary and opt-in participants to submit data on the low-reported QCDR measure for
purposes of the MIPS program.
As examples, a QCDR measure participation plan could include one or more of the following:
• Development of an education and communication plan.
• Update the QCDR measure’s specification with changes to encourage broader
participation.
• Require reporting on the QCDR measure as a condition of reporting through the QCDR.
CY 2024 Final Rule text:
QCDR Measures (QCDR ONLY)
This tab is optional and should ONLY be used by QCDRs if they’re
submitting QCDR measures for CMS consideration.
QCDR measures are required to be submitted using the QCDR Measures tab. This tab should
ONLY be filled out by QCDRs who meet the definition of a QCDR, are self-nominating as a
QCDR for 2024, and wish to self-nominate QCDR measures for CMS consideration.
Each QCDR may self-nominate a maximum of 30 QCDR measures for CMS consideration.
QCDR measures may be approved for 2 years, at CMS discretion, by attaining approval status
and meeting QCDR measure considerations and requirements. Upon annual review, CMS may
revoke the QCDR measure’s second year approval, if the QCDR measure is found to be:
• Topped out.
• Duplicative of a more robust measure.
• Reflects outdated clinical guideline.
• The QCDR measure steward is no longer in good standing or participating as a QCDR

Existing QCDRs (in good standing) will be provided a pre-populated QCDR Measures tab which
includes their 2023 MIPS performance period approved QCDR measure specifications. The prepopulated QCDR measures (for existing QCDRs in good standing only) will be added to each
existing QCDR’s respective 2024 Simplified Self-Nomination form in the QPP website. Please
note, pre-populated QCDR measures will need to be updated to include information for the
‘new’ required fields.
In addition, any updates to previously approved QCDR measure specifications from the 2023
MIPS performance period will need to be included in the QCDR measure submission for CMS
consideration. Furthermore, QCDRs in good standing may also submit new QCDR measures
for CMS consideration for the 2024 MIPS performance period.
In instances where a QCDR believes a low-reported QCDR measure that didn’t meet
benchmarking thresholds is still important and relevant to a specialist’s practice, the QCDR may
develop and submit a QCDR measure participation plan for CMS consideration. This QCDR
measure participation plan must include the QCDR’s detailed plans and changes that will
encourage MIPS eligible clinicians, groups, virtual groups, subgroups, or APM Entities, inclusive
of voluntary and opt-in participants, to submit data on the low-reported QCDR measure for
purposes of the MIPS program.
As examples, a QCDR measure participation plan could include 1 or more of the following:
• Development of an education and communication plan.
• Update the QCDR measure’s specification with changes to encourage broader
participation.
• Require reporting on the QCDR measure as a condition of reporting through the
QCDR.
Change #24:
Location: Page 57-65
Reason for Change: Alignment with current year requirements, updates to align with PIMMS
Style Guide.
CY 2023 Final Rule text:
Populating QCDR Measures
All fields denoted with an asterisk (*) are required. The QCDR Measures tab has built in
validation to ensure that all required fields are completed. Please ensure that all fields
are checked for grammar and typographical errors. A complete list of fields with
instructions can be found at the end of this section.
Select the QCDR Measures tab under QCDR Measure Submission to begin the QCDR
measure submission process:
Pre-populated Existing QCDR Measures
The QCDR measures are pre-populated in the “DRAFTS” section under the QCDR Measures
tab as part of the Simplified Self-Nomination form process for QCDRs in good standing from the
previous MIPS performance period.
To view your pre-populated existing QCDR measures:
1. Click on “DRAFTS”.

2. Click the down arrow in the “Drafts” box, click on the “Edit Details” button of the QCDR
measure to be completed.
3. Complete all required fields. Please note that required fields will vary depending on the
QCDR measure owner status, measure adoption, and new versus existing QCDR
measure status.
4. When all required fields are completed and ready for CMS submission, click on the
“Submit to CMS” button located at the bottom of your screen. If the button is greyed out,
please review and complete the missing required fields.
Self-Nominate QCDR Measures
These QCDR measures can be new or existing QCDR measures that the QCDR would like to
submit for CMS consideration. This would include existing QCDR measures that did not meet
the criteria to be in the pre-populated form (i.e., a QCDR measure borrowed from another
QCDR, a QCDR measure that was not approved for the prior year but had previously been in
the program).
To submit a QCDR measure for CMS consideration:
1. Click on “+Add QCDR Measure”.
2. Indicate the measure owner status. Select "Yes", "No", or "Co-owned by two or more
QCDRs" for this field.
a. By selecting “Yes”, you are attesting that you own or co-own the QCDR measure.
b. By selecting "No", you are attesting that you do not own or co-own the QCDR
measure and currently have written permission from the QCDR measure owner
to use the QCDR measure. Please note that the QCDR who owns the QCDR
measure must be an active and approved QCDR for the given self-nomination
period. CMS/the MIPS QCDR/Registry Support Team (PIMMS Team) will
confirm that the appropriate permission has been given by the QCDR measure
owner as part of the QCDR measure review process. (During the measure
specification process the QCDR measure owner will verify that all QCDRs
attesting to borrowing their QCDR measure do in fact have permission. Each
QCDR measure owner will be provided with names of other QCDRs that have
attested to borrowing their QCDR measure.)
c. By selecting “Co-owned by two or more QCDRs”, you are attesting that you are a
co-owner of the QCDR measure.
d. “Are you the primary steward?” This field needs to be answered “Yes” by the coowner taking primary responsibility for the QCDR measure. The purpose of
assigning a primary steward is to aid in determining appropriate measure
specifications if there is conflicting information between QCDR measure owners.
Owned QCDR Measures
1. “Do you own this measure?” Select “Yes” and click continue.
2. Complete all required fields. Please note that required fields will vary depending on the
QCDR measure owner status.
3. When all required fields are completed and ready for CMS submission, click on the
“Submit to CMS” button located at the bottom of your screen. If the button is greyed out,
please review and complete the missing required fields.

Co-Owned by two or more QCDRs
1. For the field, “Do you own this measure?” Select “Co-owned by two or more QCDRs”.
2. “Has this measure been previously approved by CMS?”, select “Yes” or “No” and then
the “Continue” button located at the bottom of your screen.
3. If “No” was selected:
a. Populate the required fields that are present.
4. If “Yes” was selected:
a. Type in the “Assigned Measure ID”. Any QCDR measure that was approved for
the previous MIPS performance period can be entered.
b. Click on “Find Measure”. If the correct QCDR measure information appears,
select the “Continue” button located at the bottom of your screen.
5. Complete all required fields. Please note that required fields will vary depending on the
QCDR measure owner status.
6. When all required fields are completed and ready for CMS submission, click on the
“Submit to CMS” button located at the bottom of your screen. If the button is greyed out,
please review and complete the missing required fields.
Borrowed QCDR Measures
Please note that the QCDR who owns the QCDR measure must be an active and approved
QCDR for the given self-nomination period. CMS/the MIPS QCDR/Registry Support Team
(PIMMS Team) will confirm that the appropriate permission has been given by the QCDR
measure owner as part of the QCDR measure review process.
1. Select “No” for “Do you own this measure?”.
2. “Has this measure been previously approved by CMS?”, select “Yes” or “No” and the
“Continue” button located at the bottom of your screen.
a. If “No” is selected:
i. Populate the required fields.
1. When uploading the written permission documentation from the
QCDR measure owner to use the QCDR measure, please include
the date of the upload in the file name.
a. Note: The required fields are limited to fields that a
borrowing QCDR needs to complete and differ from the
QCDR measure owner. The remaining QCDR measure
specifications will be collected from the QCDR measure
owner.
2. When all required fields are completed and ready for CMS
submission, click on the “Submit to CMS” button located at the
bottom of your screen. If the button is greyed out, please review
the submission for missing required fields.
b. If “Yes” is selected:
i. Type in the “Assigned Measure ID” for the given QCDR measure. Any
QCDR measure that was approved for the prior MIPS performance period
can be entered.
ii. Click on “Find Measure”. If the correct QCDR measure information
appears, select “Continue” located at the bottom of your screen.
1. If an incorrect Assigned Measure ID is entered, you will not be
able to continue until an existing Measure ID is entered (no
spaces, see example below). Please ensure the QCDR measure

you are attempting to locate was approved for the previous MIPS
performance period.
iii. Populate the required fields.
1. Note: The required fields are limited to fields that a borrowing
QCDR needs to complete and differ from the QCDR measure
owner. The remaining QCDR measure specifications will be
collected from the QCDR measure owner.
2. When all required fields are completed and ready for CMS
submission, click on the “Submit to CMS” button located at the
bottom of your screen. If the button is greyed out, please review
the submission for missing required fields.
Submitting QCDR Measures for CMS Consideration
Please ensure that all QCDR measures are in the “Submitted to CMS” status before the close of
the self-nomination period (8 p.m. ET on September 1). QCDR measures that are in a “Draft”,
or “Non-active” status will not go through the CMS consideration process for use by the selfnominating QCDR.
CY 2024 Final Rule text:
Populating QCDR Measures
All fields denoted with an asterisk (*) are required. The QCDR Measures tab has built in
validation to ensure that all required fields are completed. Please ensure that all fields
are checked for grammar and typographical errors. A complete list of fields with
instructions can be found at the end of this section.
Select the QCDR Measures tab to begin the QCDR measure submission process:
Pre-populated Existing QCDR Measures
The QCDR measures are pre-populated in the ‘DRAFTS’ section under the QCDR Measures
tab as part of the Simplified Self-Nomination form process for QCDRs in good standing from the
previous MIPS performance period.
To view your pre-populated existing QCDR measures:
1. Click ‘DRAFTS’.
2. Click the down arrow in the ‘DRAFTS’ box, then click the ‘Edit Details’ button of the QCDR
measure to be completed.
3. Complete all required fields. Required fields will vary depending on the QCDR measure
owner status, measure adoption, and new versus existing QCDR measure status.
4. When all required fields are completed and ready for CMS submission, click the ‘Submit to
CMS’ button located at the bottom of your screen. If the button is greyed out, please review and
complete the missing required fields.
Self-Nominate QCDR Measures
These QCDR measures can be new or existing QCDR measures that the QCDR would like to
submit for CMS consideration. This would include existing QCDR measures that didn’t meet the
criteria to be in the pre-populated form (i.e., a QCDR measure borrowed from another QCDR or
a QCDR measure that wasn’t approved for the prior year but had previously been in the
program).

To submit a QCDR measure for CMS consideration:
1. Click on ‘+ Add QCDR Measure’
2. Indicate the measure owner status. Select ‘Yes’, ‘No’, or ‘Co-owned by two or more QCDRs’
for this field.
a. By selecting ‘Yes’, you’re attesting that you own or co-own the QCDR measure.
b. By selecting ‘No’, you’re attesting that you don’t own or co-own the QCDR measure
and currently have written permission from the QCDR measure owner to use the QCDR
measure. The QCDR who owns the QCDR measure must be an active and approved
QCDR for the given self-nomination period. CMS/the MIPS QCDR/Registry Support
Team (PIMMS Team) will confirm that the appropriate permission has been given by the
QCDR measure owner as part of the QCDR measure review process.
i. During the measure specification process the QCDR measure owner will verify
that all QCDRs attesting to borrowing their QCDR measure do in fact have
permission.
ii. Each QCDR measure owner will be provided with names of other QCDRs that
have attested to borrowing their QCDR measure.
c. By selecting ‘Co-owned by two or more QCDRs’, you’re attesting that you’re a coowner of the QCDR measure.
d. “Are you the primary steward?” field:
i. This field needs to be answered ‘Yes’ by the co-owner taking primary
responsibility for the QCDR measure. The purpose of assigning a primary
steward is to aid in determining appropriate measure specifications if there’s
conflicting information between QCDR measure owners.
Owned QCDR Measures
1. “Do you own this measure?” field:
a. Select ‘Yes’ and click continue.
2. Complete all required fields. Required fields will vary depending on the QCDR measure
owner status.
3. When all required fields are completed and ready for CMS submission, click on the ’Submit
to CMS’ button located at the bottom of your screen. If the button is greyed out, please
review and complete the missing required fields.
Co-Owned by two or more QCDRs
1. “Do you own this measure?” field:
a. Select ‘Co-owned by two or more QCDRs’.
2. “Has this measure been previously approved by CMS?” field:
a. Select ‘Yes’ or ‘No’ and then the ‘Continue’ button located at the bottom of your
screen.
3. If ‘No’ was selected:
a. Populate the required fields that are present.
4. If ‘Yes’ was selected:
a. Type in the ‘Assigned Measure ID’. Any QCDR measure that was approved for the
previous MIPS performance period can be entered.
b. Click on ’Find Measure’. If the correct QCDR measure information appears, select
the ’Continue’ button located at the bottom of your screen.
5. Complete all required fields. Required fields will vary depending on the QCDR measure
owner status.

6. When all required fields are completed and ready for CMS submission, click the ‘Submit to
CMS’ button located at the bottom of your screen. If the button is greyed out, please review
and complete the missing required fields.
Borrowed QCDR Measures
The QCDR who owns the QCDR measure must be an active and approved QCDR for the given
self-nomination period. CMS/the MIPS QCDR/Registry Support Team (PIMMS Team) will
confirm that the appropriate permission has been given by the QCDR measure owner as part of
the QCDR measure review process.
1. “Do you own this measure?” field:
a. Select ‘No’.
2. “Has this measure been previously approved by CMS?” field:
a. Select ‘Yes’ or ’No’ and the ‘Continue’ button located at the bottom of your screen.
b. If ’No’ is selected:
i. Populate the required fields.
1. When uploading the written permission documentation from the QCDR
measure owner to use the QCDR measure, please include the date of the
upload in the file name.
a. Note: The required fields are limited to fields that a borrowing
QCDR needs to complete, and these fields differ from the QCDR
measure owner fields. The remaining QCDR measure
specifications will be collected from the QCDR measure owner.
2. When all required fields are completed and ready for CMS submission,
click the ‘Submit to CMS’ button located at the bottom of your screen. If
the button is greyed out, please review the submission for missing
required fields.
c. If ‘Yes’ is selected:
i. Type in the ‘Assigned Measure ID’ for the given QCDR measure. Any QCDR
measure that was approved for the prior MIPS performance period can be
entered.
ii. Click ‘Find Measure’. If the correct QCDR measure information appears, select
‘Continue’ located at the bottom of your screen.
1. If an incorrect Assigned Measure ID is entered, you won’t be able to
continue until an existing Measure ID is entered (don’t use spaces, see
example below). Please ensure the QCDR measure you’re attempting to
locate was approved for the previous MIPS performance period.
iii. Populate the required fields.
1. Note: The required fields are limited to fields that a borrowing QCDR
needs to complete, and these fields differ from the QCDR measure owner
fields. The remaining QCDR measure specifications will be collected from
the QCDR measure owner.
2. When all required fields are completed and ready for CMS submission,
click the ‘Submit to CMS’ button located at the bottom of your screen. If
the button is greyed out, please review the submission for missing
required fields.
Submitting QCDR Measures for CMS Consideration
Please ensure that all QCDR measures are in the ‘Submitted to CMS’ status before the close of
the self-nomination period (8 p.m. ET on September 1). QCDR measures that are in a ‘Draft’ or
‘Non-active’ status won’t go through the CMS consideration process for use by the selfnominating QCDR. Please ensure that any QCDR measures in ‘Draft’ status are moved into

‘Non-active’ or ‘Submitted’ or the self-nomination form can’t be submitted for CMS
consideration.
Change #25:
Location: Page 65-81
Reason for Change: Alignment with current year requirements, updates to align with PIMMS
Style Guide.
CY 2023 Final Rule text:
Measure Specification Fields
The following section provides detailed information on each QCDR measure specification field.
Please note that required fields will vary depending on the QCDR measure owner status,
measure adoption, and new versus existing QCDR measure’s status.
Measure Info Section:
•
•

•

•

•

•

•

Measure Title* – Provide the measure title, which should begin with a clinical condition
of focus, followed by a brief description of action. Example: Preventive Care and
Screening: Screening for Depression and Follow-Up Plan.
Measure Description* – Describe the measure in full detail. Example: Percentage of
patients aged 12 years and older screened for depression on the date of the encounter
using an age-appropriate standardized depression screening tool and if positive, a
follow-up plan is documented on the date of the positive screen.
Denominator* – Describe the eligible patient population to be counted to meet the
measures’ inclusion requirements. Example: All patients aged 12 years and older at the
beginning of the measurement period with at least one eligible encounter during the
measurement period.
Numerator* – Provide the clinical action that meets the requirements of the measure.
Example: Patients screened for depression on the date of the encounter using an ageappropriate standardized tool and, if positive, a follow-up plan is documented on the date
of the positive screen.
Denominator Exclusions* – Provide a denominator exclusion that would remove the
patient, procedure, or unit of measurement from the denominator. Enter “N/A” if not
applicable. Example: Women who had a bilateral mastectomy or who have a history of
a bilateral mastectomy or for whom there is evidence of a right and a left unilateral
mastectomy.
Denominator Exceptions* – Provide the denominator exception that would allow for the
exercise of clinical judgement. Applied after the numerator calculation and only if the
numerator conditions are not met. Enter “N/A” if not applicable. Examples: Medical
Reason(s): Patient is in an urgent or emergent situation where time is of the essence
and to delay treatment would jeopardize the patient’s health status. Situations where the
patient’s functional capacity or motivation to improve may impact the accuracy of results
of standardized depression assessment tools. Example: Certain court appointed cases
or cases of delirium.
Numerator Exclusions* – Provide a numerator exclusion that would remove the
patient, procedure, or unit of measurement from the numerator, used only in ratio
measures. Applied before the numerator calculation. Enter “N/A” if not applicable.

•

•

•
•
•
•
•
•

Example: If the number of central line blood stream infections per 1,000 catheter days
were to exclude infections with a specific bacterium, that bacterium would be listed as a
numerator exclusion.
Primary Data Source Used for Abstraction* – Select all applicable primary data
sources used for the QCDR measure. This may include, but is not limited to,
administrative claims data, facility discharge data, chronic condition data warehouse
(CCW), claims, CROWNWeb, EHR (enter relevant parts), Hybrid, Inpatient
Rehabilitation Facility – Patient Assessment Instrument (IRF-PAI), Long-term Care
Hospital (LTCH) CARE data set, National Healthcare Safety Network (NHSN),
Outcomes and Assessment Information Set (OASIS-C1), paper medical record,
Prescription Drug Event Data Elements, Patient-Reported Outcomes Measurement
Information System (PROMIS), record review, Registry (enter which Registry), Survey,
and/or Other (describe source).
o If applicable, please enter additional information regarding the data source used
– Provide additional information when “EHR”, "Registry" and/or "Other" is
selected in the text box that appears as needed. You may list additional data
sources used in addition to the primary data source. Example: ABC Registry.
National Quality Forum (NQF) ID (Identifier) Number (if applicable) –
o Provide the assigned NQF ID number, if the submitted QCDR measure
fully aligns with the NQF endorsed version of the measure. If no NQF ID
number, enter “0000”. Examples: 0418, 0000.
Measure Type* – Select which 1 measure type applies to the QCDR measure from the
drop-down list.
National Quality Strategy (NQS) Domain* – Select which 1 NQS domain applies to the
QCDR measure from the drop-down list
Care Setting* – Select all applicable care settings that are included within the QCDR
measure. If “Other” is selected, a text box will appear for free text to be entered.
Includes Telehealth?* – Please answer “Yes” or “No” if the QCDR measure’s
denominator includes services that are able to be provided via telehealth. (Please review
the quality action to ensure that it is appropriate via telehealth).
Which Meaningful Measure Area applies to this measure?* – Select 1 meaningful
measure area that best applies to the measure from the drop-down list.
Meaningful Measure Area Rationale* – Provide a rationale for the selected
“Meaningful Measure Area” for the QCDR measure. Example: This measure identifies
patients with depression and an appropriate follow-up treatment plan.

Analytics Section:
• Measure Calculation Type* – Indicate the calculation type of QCDR measure. If
“Continuous Variable” or Ratio” is chosen, provide a defined range of scores and the
topics it describes in the text box that appears. Example: 0-250 minutes
o Inverse Measure – This is a measure where a lower calculated performance rate
for this type of measure would indicate better clinical care or control. The
“Performance Not Met” numerator option for an inverse measure is the
representation of the better clinical quality or control. Submitting that numerator
option will produce a performance rate that trends closer to 0%, as quality
increases.
o Proportional Measure – This is a measure where the score is derived by dividing
the number of cases that meet a criterion for quality (the numerator) by the

•
•

•

•

number of eligible cases within a given time frame (the denominator). The
numerator cases are a subset of the denominator cases. Example: Percentage
of eligible women with a mammogram performed in the last year.
o Continuous Variable Measure – This is a measure where a measure score in
which each individual value for the measure can fall anywhere along a
continuous scale and can be aggregated using a variety of methods such as the
calculation of a mean or median. Example: Mean time to thrombolytics which
aggregates the time in minutes from a case presenting with chest pain to the time
of administration of thrombolytics.
o CMS encourages QCDRs to construct the numerators to be proportional
by establishing an expected benchmark based on guidelines or national
performance data. Applying MIPS scoring methodology has proven to be
challenging for non-proportional measures because variability in the data
points makes decile creation based on a mathematical analysis very
unpredictable.
o Ratio Measure – Indicate if the measure is a ratio measure. This is a measure
where a score that may have a value of zero or greater that is derived by dividing
a count of one type of data by a count of another type of data. The key to the
definition of a ratio is that the numerator is not in the denominator. Example: The
number of patients with central lines who develop infection divided by the number
of central line days). Rates closer to 1 represent the expected outcome.
Number of performance rates to be calculated and submitted* – Indicate the
number of performance rates submitted for the measure.
Performance Rate Description(s) – Provide a brief description for each performance
rate to be calculated and submitted. This is required for a QCDR measure that has more
than 1 performance rate. Example: This measure will be calculated with 7 performance
rates:
o Rate 1: Overall Percentage for patients (aged 5-50 years) with well-controlled
asthma, without elevated risk of exacerbation
o Rate 2: Percentage of pediatric patients (aged 5-17 years) with well-controlled
asthma, without elevated risk of exacerbation
o Rate 3: Percentage of adult patients (aged 18-50 years) with well-controlled
asthma, without elevated risk of exacerbation
o Rate 4: Asthma well-controlled (submit the most recent specified asthma control
tool result) for patients (ages 5 to 17 years) with Asthma.
o Rate 5: Asthma well-controlled (submit the most recent specified asthma control
tool result) for patients (ages 18 to 50 years) with Asthma.
o Rate 6: Patient not at elevated risk of exacerbation for patients (ages 5 to 17
years) with Asthma
o Rate 7: Patient not at elevated risk of exacerbation for patients (ages 18 to 50
years) with Asthma
Indicate an Overall Performance Rate* – Select from the drop-down list which of the
submitted rates will represent an overall performance rate for the measure or how an
overall performance rate could be calculated based on the data submitted (for example,
simple average of the performance rates submitted) or weighted average (sum of the
numerators divided by the sum of the denominators), etc. If only 1 performance rate is
being submitted, enter “1st Performance Rate”.
Risk-Adjusted Status* – Indicate if the measure is risk-adjusted.

If risk-adjusted, indicate which score is risk-adjusted* – Indicate the score
that is risk-adjusted for the measure. If social determinants of health are built into
the risk adjustment model, please specify.
Is the QCDR Measure able to be abstracted?* – Please attest the measure elements
can be abstracted and are feasible. If borrowing the QCDR measure, it is expected that
the ability to abstract the data according to the QCDR measure owner’s specifications is
confirmed prior to self-nominating the QCDR measure. Withdrawing of the QCDR
measure during an active performance period is not acceptable.
Disclosure: Does this measure require the use of proprietary software, devices,
etc.?* – Indicate if the QCDR measure requires use of a proprietary software, device,
survey, etc. that a clinician, group, virtual group, or subgroup would have to purchase or
pay to utilize.
o

•

•

Testing Section:
• Was the QCDR measure tested at the individual clinician level? – Select “Yes” or
“No” to indicate if the QCDR measure was tested at the MIPS eligible clinician level.
• Validity Testing Summary* – Provide validity testing summary, at a minimum, face
validity is required by the QCDR measure owner. For face validity, list the total number
of voting members in addition to the percentage that voted in favor of the measure’s face
validity. If further validity testing was completed, please include the type of validity
testing analysis (Correlation, Construct Validity, Gold Standard Comparison, Internal
Consistency, Predictive Validity, Structural Validity, etc.), the number included within the
testing sample, and any summary/interpretation of your results.
• Feasibility Testing Summary (optional) – Provide feasibility testing summary, if
available. For a patient reported outcome in performance measurement (PRO-PM)
measure, select the data collection format(s). Please include a summary of the extent
that the specified data elements are available in electronically defined fields. Examples
of extent: ALL data elements are in defined fields in administrative claims, ALL data
elements are in defined fields in EHRs, ALL data elements are in defined fields in
electronic clinical data ([e.g., clinical registry, nursing home minimum data set, or MDS,
home health Outcome and Assessment Information Set (OASIS)]), ALL data elements
are in defined fields in a combination of electronic sources, SOME data elements are in
defined fields in electronic sources, NO data elements are in defined fields in electronic
sources, Patient/family-reported information: electronic, Patient/family-reported
information: paper.
• Reliability Testing Summary (optional) – Provide reliability testing summary, if
available. Please include type of reliability testing such as Measure Score Reliability,
Data Element Reliability, or please note if not available. Include type of reliability testing
analysis (Signal to Noise, Random Split Half Correlation, IRR [Inter-rater reliability], ICC
(Intraclass correlation coefficient), Test-Retest, Internal Consistency, or Other), the
number included within the testing sample, and any summary/interpretation of your
results.
Supporting Documentation Section:
• Describe Link to Cost Measure/Improvement Activity* – Describe the link between
the QCDR measure, cost measure, and an improvement activity. Please document “No
Link Identified” if there is no link to a cost measure or an improvement activity. In cases
where a QCDR measure does not have a clear link to a cost measure and an

•

•

•

•
•

•

•

improvement activity, we would consider exceptions if the potential QCDR measure
otherwise meets the QCDR measure requirements and considerations.
Clinical Recommendation Statement* – Provide a concise statement regarding the
clinical recommendation for this QCDR measure including the current clinical guideline
the measure is derived. Please list the type of evidence that was used to support the
measure such as clinical guidelines, USPSTF (U.S. Preventive Services Task Force)
guidelines, systematic review, empirical data, or define any other type of evidence.
Specify the grade of the guidelines/systematic review, if available. Example: Adolescent
Recommendation (12-18 years) “The USPSTF recommends screening for MDD in
adolescents aged 12 to 18 years. Screening should be implemented with adequate
systems in place to ensure accurate diagnosis, effective treatment, and appropriate
follow-up (B recommendation)” (Sui, A. and USPSTF, 2016, p. 360).
Rationale for the QCDR measure* – Provide a concise statement regarding the
rationale for the QCDR measure. Example: Depression is a serious medical illness
associated with higher rates of chronic disease increased health care utilization, and
impaired functioning (Pratt, Brody 2014). 2014 U.S. survey data indicate that 2.8 million
(11.4%) adolescents aged 12 to 17 had a major depressive episode (MDE) in the past
year and that 15.7 million (6.6%) adults aged 18 or older had at least one MDE in the
past year, with 10.2 million adults (4.3%) having one MDE with severe impairment in the
past year (Center for Behavioral Health Statistics and Quality, 2015).
Provide measure performance data (# months data collected, average
performance rate, performance range, and number of clinicians or groups)* –
Please provide the number of months the data was collected, average performance rate,
standard deviation, performance range, and the number of eligible clinicians and/or TINs
submitting the measure.
Can the measure be benchmarked against the previous performance period data?
Enter "Yes" or "No" to indicate if the benchmark from prior years is able to be used for
comparison. If this is an existing measure, an answer is required.
If applicable, please provide details why the previous benchmark can or cannot be
used. Provide details regarding why the previous benchmark can or cannot be used in
response to the changes to the existing measure. Example: The improvement addition
to the numerator will make this measure an Outcome measure and therefore cannot be
compared to the measure from last year.
If applicable, provide the study citation to support performance gap for the
measure – Provide the study citation for the measure to support the performance gap.
Citations should be the most current available or within 5 years. Example: Negative
outcomes associated with depression make it crucial to screen to identify and treat
depression in its early stages. While Primary Care Providers (PCPs) serve as the first
line of defense in the detection of depression, studies show that PCPs fail to recognize
up to 50% of depressed patients (Borner, 2010, p. 948).
If applicable, provide a Participation Plan if QCDR measure has low adoption by
clinicians – If a QCDR measure fails to meet benchmarking thresholds for 2
consecutive performance periods (i.e., the data submitted is insufficient in meeting the
case minimum and volume thresholds required for benchmarking), the QCDR may
submit a participation plan for CMS consideration if is believed that the measure is
important and relevant to a specialist’s practice.
o Participation Plan requirements:
o Detailed plan and methods to encourage eligible clinicians and groups to
increase QCDR measure adoption.

Example: A QCDR measure participation plan could include 1 or more of
the following:
• Development of an education and communication plan
• Update the QCDR measure’s specification with changes to
encourage broader participation
• Require reporting on the QCDR measure as a condition of
reporting through the QCDR
Please indicate applicable specialty/specialties* – Select 1 or more applicable
specialties. Multiple specialties can be selected. If “Other” is selected, please enter free
text in the “Other Specialties” text box that appears.
Preferred measure published clinical category* – Please provide a preferred clinical
or specialty category. Please note that if a preferred measure published clinical category
is not provided, one will be assigned to the measure by CMS. Example: Diabetes and
Substance Use/Management.
QCDR Notes – Provide any additional notes that would assist in the review or
clarification of the QCDR measure.
If existing measure with changes, please indicate what has changed to the
existing measure. (Optional) – Please provide information on what changes were
made to the existing measure(s).
o

•
•

•
•

CY 2024 Final Rule text:
Measure Specification Fields
The following section provides detailed information on each QCDR measure specification field.
Required fields will vary depending on the QCDR measure owner’s status, measure adoption,
and a QCDR measure’s ‘new’ versus ‘existing’ status.
Measure Info Section:
• Measure Title* – Provide the measure title, which should begin with a clinical condition of
focus, followed by a brief description of action. Example: Preventive Care and Screening:
Screening for Depression and Follow-Up Plan.
• Measure Description* – Describe the measure in full detail. Example: Percentage of patients
ages 12 and older screened for depression on the date of the encounter using an ageappropriate standardized depression screening tool (and if positive, a follow-up plan is
documented on the date of the positive screen).
• Denominator* – Describe the eligible patient population to be counted to meet the measures’
inclusion requirements. Example: All patients ages 12 and older at the beginning of the
measurement period with at least 1 eligible encounter during the measurement period.
• Numerator* – Provide the clinical action that meets the requirements of the measure.
Example: Patients screened for depression on the date of the encounter using an ageappropriate standardized tool (and if positive, a follow-up plan is documented on the date of the
positive screen).
• Denominator Exclusions* – Provide a denominator exclusion that would remove the patient,
procedure, or unit of measurement from the denominator. Enter ‘N/A’ if not applicable. Example:
Women who had a bilateral mastectomy or who have a history of a bilateral mastectomy or for
whom there’s evidence of a right and a left unilateral mastectomy.
• Denominator Exceptions* – Provide the denominator exception that would allow for the
exercise of clinical judgement. Applied after the numerator calculation and only if the numerator
conditions aren’t met. Enter ‘N/A’ if not applicable. Examples: Medical Reason(s): Patient is in

an urgent or emergent situation where time is of the essence and to delay treatment would
jeopardize the patient’s health status. Situations where the patient’s functional capacity or
motivation to improve may impact the accuracy of results of standardized depression
assessment tools. Example: Certain court-appointed cases or cases of delirium.
• Numerator Exclusions* – Provide a numerator exclusion that would remove the patient,
procedure, or unit of measurement from the numerator (used only in ratio measures). Applied
before the numerator calculation. Enter ‘N/A’ if not applicable. Example: If the number of central
line blood stream infections per 1,000 catheter days were to exclude infections with a specific
bacterium, that bacterium would be listed as a numerator exclusion.
• Primary Data Source Used for Abstraction* – Select all applicable primary data sources
used for the QCDR measure. This may include, but isn’t limited to, administrative claims data,
facility discharge data, chronic condition data warehouse (CCW), claims, CROWNWeb, EHR
(enter relevant parts), Hybrid, Inpatient Rehabilitation Facility – Patient Assessment Instrument
(IRF-PAI), Long-term Care Hospital (LTCH) CARE data set, National Healthcare Safety Network
(NHSN), Outcomes and Assessment Information Set (OASIS-C1), paper medical record,
Prescription Drug Event Data Elements, Patient-Reported Outcomes Measurement Information
System (PROMIS), record review, Registry (enter which Registry), Survey, and/or Other
(describe source).
o If applicable, please enter additional information regarding the data source used –
Provide additional information when ’EHR’, ‘Registry’ and/or "Other" is selected in the
text box that appears as needed. You may list data sources used in addition to the
primary data source. Example: ABC Registry.
• Consensus-Based Entity (CBE) ID (Identifier) Number (if applicable) –
o Provide the assigned CBE ID number, if the submitted QCDR measure fully aligns with
the CBE endorsed version of the measure. If no CBE ID number, enter ‘0000’.
Examples: 0418, 0000.
• High Priority Measure?* – Enter ‘Yes’ or ’No’ to indicate if the measure is a high priority
measure.
• High Priority Type* – If ’Yes’ is selected for “High Priority Measure?” select the 1 appropriate
high priority measure type from the drop-down list.
• Measure Type* – Select which 1 measure type applies to the QCDR measure from the dropdown list.
• Care Setting* – Select all applicable care settings that are included within the QCDR
measure. If “Other” is selected, a text box will appear for free text to be entered.
• Includes Telehealth?* – Please answer ‘Yes’ or ’No’ if the QCDR measure’s denominator
includes services that are able to be provided via telehealth. (Please review the quality action to
ensure it’s appropriate via telehealth).
Analytics Section:
• Measure Calculation Type* – Indicate the calculation type of QCDR measure. If “Continuous
Variable” or Ratio” is chosen, provide a defined range of scores and the topics it describes in
the text box that appears. Example: 0-250 minutes
o Inverse Measure – This is a measure where a lower calculated performance rate for
this type of measure would indicate better clinical care or control and is represented by
the ‘Performance Not Met’ numerator option. Submitting that numerator option will
produce a performance rate that trends closer to 0%, as quality increases.
o Proportional Measure – This is a measure where the score is derived by dividing the
number of cases that meet a criterion for quality (the numerator) by the number of
eligible cases within a given time frame (the denominator). The numerator cases are a
subset of the denominator cases. Example: Percentage of eligible women with a
mammogram performed in the last year.

o Continuous Variable Measure – This is a measure where the measure score for each
individual value for the measure can fall anywhere along a continuous scale and can be
aggregated using a variety of methods, such as the calculation of a mean or median.
Example: Mean time to thrombolytics which aggregates the time in minutes from a case
presenting with chest pain to the time of administration of thrombolytics.
o CMS encourages QCDRs to construct the numerators to be proportional by
establishing an expected benchmark based on guidelines or national
performance data. Applying MIPS scoring methodology has proven to be
challenging for non-proportional measures because variability in the data points
makes decile creation based on a mathematical analysis very unpredictable.
o Ratio Measure – Indicate if the measure is a ratio measure. This is a measure where a
score that may have a value of zero or greater (derived by dividing a count of 1 type of
data by a count of another type of data). The key to the definition of a ratio is that the
numerator isn’t in the denominator. Example: The number of patients with central lines
who develop infection divided by the number of central line days). Rates closer to 1
represent the expected outcome.
• Number of performance rates to be calculated and submitted* – Indicate the number of
performance rates submitted for the measure.
• Performance Rate Description(s) – Provide a brief description for each performance rate to
be calculated and submitted. This is required for a QCDR measure that has more than 1
performance rate. Example: This measure will be calculated with 7 performance rates:
o Rate 1: Overall Percentage for patients (ages 5-50) with well-controlled asthma,
without elevated risk of exacerbation
o Rate 2: Percentage of pediatric patients (ages 5-17) with well-controlled asthma,
without elevated risk of exacerbation
o Rate 3: Percentage of adult patients (ages 18-50) with well-controlled asthma, without
elevated risk of exacerbation
o Rate 4: Asthma well-controlled (submit the most recent specified asthma control tool
result) for patients (ages 5-17) with Asthma.
o Rate 5: Asthma well-controlled (submit the most recent specified asthma control tool
result) for patients (ages 18-50) with Asthma.
o Rate 6: Patient not at elevated risk of exacerbation for patients (ages 5-17) with
Asthma
o Rate 7: Patient not at elevated risk of exacerbation for patients (ages 18-50) with
Asthma.
• Indicate an Overall Performance Rate* – Select from the drop-down list which submitted
rates will represent an overall performance rate for the measure or how an overall performance
rate could be calculated based on the data submitted (for example, simple average of the
performance rates submitted) or weighted average (sum of the numerators divided by the sum
of the denominators), etc. If only 1 performance rate is being submitted, enter ‘1st
Performance Rate’.
• Risk-Adjusted Status* – Indicate if the measure is risk-adjusted.
o If risk-adjusted, indicate which score is risk-adjusted* – Indicate the score that’s riskadjusted for the measure. If social determinants of health are built into the risk
adjustment model, please specify.
• Is the QCDR Measure able to be abstracted?* – Please attest the measure elements can be
abstracted and are feasible. If borrowing the QCDR measure, it’s expected that the ability to
abstract the data according to the QCDR measure owner’s specifications is confirmed prior to
self-nominating the QCDR measure. Withdrawing the QCDR measure during an active
performance period isn’t acceptable.

• Disclosure: Does this measure require the use of proprietary software, devices, etc.?* –
Indicate if the QCDR measure requires the use of a proprietary software, device, survey, etc.
that a clinician, group, virtual group, or subgroup would have to purchase or pay to use.
Testing Section:
• Was the QCDR measure tested at the individual clinician level? – Select ‘Yes’ or ‘No’ to
indicate if the QCDR measure was tested at the MIPS eligible clinician level.
• Validity Testing Summary* – Provide validity testing summary. At a minimum, face validity is
required by the QCDR measure owner for the initial MIPS payment year. For face validity, list
the total number of voting members in addition to the percentage that voted in favor of the
measure’s face validity. Empirical validity testing is required for all QCDR measures after their
first year in MIPS. If empirical validity testing was completed, please include the type of validity
testing analysis (Construct, Convergent, Discriminant, Predictive Validity, Data Element Validity,
etc.), sample size for each test completed, and any summary/ interpretation of your results. If
data element validity testing is completed, data element reliability testing isn’t required.
• Feasibility Testing Summary – Provide feasibility testing summary, if available. For a patientreported outcome-based performance measure (PRO-PM), select the data collection format(s).
Please include a summary of the extent that the specified data elements are available in
electronically defined fields. Examples of extent: ALL data elements are in defined fields in
administrative claims. ALL data elements are in defined fields in EHRs. ALL data elements are
in defined fields in electronic clinical data (e.g., clinical registry, nursing home minimum data set,
or MDS, home health Outcome and Assessment Information Set (OASIS)). ALL data elements
are in defined fields in a combination of electronic sources. SOME data elements are in defined
fields in electronic sources. NO data elements are in defined fields in electronic sources, or
patient/family-reported information: electronic and paper. Feasibility testing is required for all
existing QCDR measures.
• Reliability Testing Summary – Provide reliability testing summary, if available. Please
include type of reliability testing such as Measure Score Reliability, Data Element Reliability, or
note if it isn’t available. If Data Element Validity testing was completed, then data element
reliability testing isn’t required.
• Include type of reliability testing analysis (Signal-to-Noise, Random Split Half Correlation, IRR
[Inter-rater reliability], ICC (Intraclass correlation coefficient), Test-Retest, Internal Consistency,
or Other), sample size, and any summary/interpretation of your results. Reliability testing is
required for all existing QCDR measures.
Supporting Documentation Section:
• Describe Link to Cost Measure/Improvement Activity* – Describe the link between the
QCDR measure, cost measure, and an improvement activity. Please document “No Link
Identified” if there’s no link to a cost measure or an improvement activity. In cases where a
QCDR measure doesn’t have a clear link to a cost measure and an improvement activity, we
would consider exceptions if the potential QCDR measure otherwise meets the QCDR measure
requirements and considerations.
• QCDR Measure Reporting Options* – Please indicate if the QCDR measure has been
finalized in a CMS-approved MVP for the given MIPS performance period or if it will be used in
traditional MIPS.
• Clinical Recommendation Statement* – Provide a concise statement regarding the clinical
recommendation for this QCDR measure including the current clinical guideline for which the
measure is derived. Please list the type of evidence that was used to support the measure such
as clinical guidelines, USPSTF (U.S. Preventive Services Task Force) guidelines, systematic
review, empirical data, or define any other type of evidence. Specify the grade of the
guidelines/systematic review, if available. Example: Adolescent Recommendation (ages 12-18)

“The USPSTF recommends screening for MDD in adolescents ages 12 to 18. Screening should
be implemented with adequate systems in place to ensure accurate diagnosis, effective
treatment, and appropriate follow-up (B recommendation)” (Sui, A. and USPSTF, 2016, p. 360).
• Rationale for the QCDR measure* – Provide a concise statement regarding the rationale for
the QCDR measure. Example: Depression is a serious medical illness associated with higher
rates of chronic disease increased health care utilization, and impaired functioning (Pratt, Brody
2014). 2014 U.S. survey data indicate that 2.8 million (11.4%) adolescents ages 12 to 17 had a
major depressive episode (MDE) in the past year and that 15.7 million (6.6%) adults ages 18 or
older had at least 1 MDE in the past year, with 10.2 million adults (4.3%) having one MDE with
severe impairment in the past year (Center for Behavioral Health Statistics and Quality, 2015).
• Provide measure performance data (# months data collected, average performance rate,
performance range, and number of clinicians or groups)* – Please provide the number of
months the data was collected, average performance rate, standard deviation, performance
range, and the number of eligible clinicians and/or TINs submitting the measure.
• Can the measure be benchmarked against the previous performance period data? Enter
‘Yes’ or ‘No’ to indicate if the benchmark from prior years is able to be used for comparison. If
this is an existing measure, an answer is required.
• If applicable, please provide details why the previous benchmark can or cannot be
used. Provide details regarding why the previous benchmark can or can’t be used in response
to the changes to the existing measure. Example: The improvement addition to the numerator
will make this measure an Outcome measure; therefore it can’t be compared to the measure
from last year.
• If applicable, provide the study citation to support performance gap for the measure –
Citations should be the most current available or within 5 years. Example: Negative outcomes
associated with depression make it crucial to screen, to identify, and treat depression in its early
stages. While Primary Care Providers (PCPs) serve as the first line of defense in the detection
of depression, studies show that PCPs fail to recognize up to 50% of depressed patients
(Borner, 2010, p. 948).
• If applicable, provide a Participation Plan if QCDR measure has low adoption by
clinicians – If a QCDR measure fails to meet benchmarking thresholds for 2 consecutive
performance periods (i.e., the data submitted is insufficient in meeting the case minimum
requirements and volume thresholds required for benchmarking), the QCDR may submit a
participation plan for CMS consideration if the QCDR believes that the measure is important and
relevant to a specialist’s practice.
o Participation Plan requirements:
 Detailed plan and methods to encourage eligible clinicians and groups to
increase QCDR measure adoption.
 Example: A QCDR measure participation plan could include 1 or more of
the following:
• Development of an education and communication plan
• Update the QCDR measure’s specification with changes (to
encourage broader participation)
• Require reporting on the QCDR measure as a condition of
reporting through the QCDR
• Please indicate applicable specialty/specialties* – Select 1 or more applicable specialties.
Multiple specialties can be selected. If “Other” is selected, please enter free text in the “Other
Specialties” text box that appears.
• Preferred measure published clinical category* – Please provide a preferred clinical or
specialty category. If a preferred measure published clinical category isn’t provided, 1 will be
assigned to the measure by CMS. Example: Diabetes and Substance Use/Management.

• QCDR Notes – Provide any additional notes that would assist in the review or clarification of
the QCDR measure.
• If existing measure with changes, please indicate what has changed to the existing
measure. (Optional) – Please provide information on what changes were made to the existing
measure(s).
Change #26:
Location: Page 81-82
Reason for Change: Alignment with current year requirements, updates to align with PIMMS
Style Guide.
CY 2023 Final Rule text:
QCDR Measure Permission Checklist
If a QCDR has been granted permission to use a QCDR measure owned by another active and
approved QCDR, the permission must be obtained prior to self-nominating the borrowed QCDR
measure for each MIPS performance period. It is expected that the ability to abstract the
data according to the QCDR measure owner’s specifications is a condition of selfnominating the QCDR measure. Withdrawal of a QCDR measure mid-performance period
is not acceptable and may lead to remedial action, up to and including termination. The
following is a QCDR measure permission checklist:
•
•
•
•
•

Identify the QCDR measure(s) your QCDR will request for permission to use.
Contact the QCDR measure owner to request permission to use their QCDR
measure(s).
The QCDR Qualified Posting and QCDR Measure Specifications located on the CMS
QPP Resource Library page may be used to identify the appropriate point of contact.
Obtain written permission from the QCDR measure owner to use their QCDR
measure(s).
Upload the documentation at the time of self-nomination for CMS reference. Please
use the “Documentation of Approval from other QCDR” section to upload your
supporting documentation.
o Note: CMS does not provide agreement templates and defers to the QCDRs to
the appropriate content included in such an agreement.

CY 2024 Final Rule text:
QCDR Measure Permission Checklist
If a QCDR has been granted permission to use a QCDR measure owned by another active and
approved QCDR, the permission must be obtained prior to self-nominating the borrowed QCDR
measure for each MIPS performance period. It’s expected that the ability to abstract the
data according to the QCDR measure owner’s specifications is a condition of selfnominating the QCDR measure. Withdrawal of a QCDR measure mid-performance period
isn’t acceptable and may lead to remedial action, up to and including termination. The
following is a QCDR measure permission checklist:
•
•
•

Identify the QCDR measure(s) your QCDR will request for permission to use.
Contact the QCDR measure owner to request permission to use their QCDR
measure(s).
The QCDR Qualified Posting and QCDR Measure Specifications located on the CMS
QPP Resource Library may be used to identify the appropriate point of contact.

•
•

Obtain written permission from the QCDR measure owner to use their QCDR
measure(s).
Upload the documentation at the time of self-nomination for CMS reference. Please
use the ‘Documentation of Approval from other QCDR’ section to upload your
supporting documentation. o Note: CMS doesn’t provide agreement templates and
defers to the QCDRs regarding the appropriate content to include in such an
agreement.

Change #27:
Location: Page 82-83
Reason for Change: Updates to align with PIMMS Style Guide.
CY 2023 Final Rule text:
Submission of the Self-Nomination Form
1. Once the required fields of all tabs are completed, the self-nomination status will update to
“Draft Complete”. Please note, you will not be able to successfully submit a Self-Nomination
form unless all the required fields, marked with a red asterisk (*), of all tabs have been
populated.
2. Once the form is filled out in its entirety and all edits are finalized, you will need to click on
the “Submit For Review” button to save the entire Self-Nomination form and complete the
submission process. The “Submit For Review” button is located at the bottom of the leftside of the page under the Self-Nomination form tabs, or can also be found on the selfnomination landing page.
3. You will receive a confirmation email with your self-nomination number. Please save the
email for future reference.
4. It is suggested that you export a copy of your approved Self-Nomination form for your
records.
5. Add ‘Watchers’ to monitor the status of your Self-Nomination form. This feature allows
intermediaries to create a list of users who should receive an email notification when
comments are added.
CY 2024 Final Rule text:
Submission of the Self-Nomination Form
1. Once the required fields of all tabs are completed, the self-nomination status will update to
“Draft Complete”. You won’t be able to successfully submit a Self-Nomination form unless all the
required fields, marked with a red asterisk (*), of all tabs have been populated.
2. Once the form is filled out in its entirety and all edits are finalized, you’ll need to click on the
‘Submit For Review’ button to save the entire Self-Nomination form and complete the
submission process. The ‘Submit For Review’ button is located at the bottom of the left-side of
the page under the Self-Nomination form tabs, as well as on the self-nomination landing page.
3. You’ll receive a confirmation email with your self-nomination number. Please save the email
for future reference.
4. It’s suggested that you print a copy of your approved Self-Nomination form for your records.
5. Add ‘Watchers’ to monitor the status of your Self-Nomination form. This feature allows
intermediaries to create a list of users who should receive an email notification when comments
are added.
Change #28:
Location: Page 84

Reason for Change: Alignment with current year requirements, updates to align with PIMMS
Style Guide.
CY 2023 Final Rule text:
Modifying a Self-Nomination Form
To review or modify your Self-Nomination form, click “EDIT” on the self-nomination landing
page. As a reminder, you will not be able to modify your submission after 8 p.m. ET on
September 1, 2022.
If you have any questions about the 2023 QPP Self-Nomination form, please contact the QPP
Service Center at 1-866-288-8292 or by email at: [email protected] (Monday through Friday
from 8 a.m. to 8 p.m. ET). To receive assistance more quickly, please consider calling during
non-peak hours, before 10 a.m. and after 2 p.m. ET. Customers who are hearing impaired can
dial 711 to be connected to a TRS Communications Assistant.
CY 2024 Final Rule text:
Modifying a Self-Nomination Form
To review or modify your Self-Nomination form, click ‘EDIT’ on the self-nomination landing
page. As a reminder, you won’t be able to modify your submission after 8 p.m. ET on
September 1, 2023.
If you have any questions about the 2023 QPP Self-Nomination form, please contact the QPP
Service Center at 1-866-288-8292 or by email at: [email protected] (Monday through Friday
from 8 a.m. to 8 p.m. ET). To receive assistance more quickly, please consider calling during
non-peak hours, before 10 a.m. and after 2 p.m. ET. Customers who are hearing impaired can
dial 711 to be connected to a TRS Communications Assistant.
Change #29:
Location: Page 84-85
Reason for Change: Alignment with current year requirements, updates to align with PIMMS
Style Guide.
CY 2023 Final Rule text:
Withdrawing a Self-Nomination Form
If you wish to withdraw a Self-Nomination form that has already been submitted, click on the
“Withdraw” button - withdrawing the entire Self-Nomination form from consideration to
participate in MIPS as a prospective QCDR or Qualified Registry. The “Withdraw” option can be
found on the Self-Nomination landing page or within the Self-Nomination form.
CY 2024 Final Rule text:
Withdrawing a Self-Nomination Form
If you wish to withdraw a Self-Nomination form that has already been submitted, click on the
’Withdraw’ button - withdrawing the entire Self-Nomination form from consideration to

participate in MIPS as a QCDR or Qualified Registry. The ’Withdraw’ is on the Self-Nomination
landing page or within the Self-Nomination form.
Change #30:
Location: Page 85-86
Reason for Change: Updates to align with PIMMS Style Guide.
CY 2023 Final Rule text:
Comments
How to View/Add Comment
Please periodically monitor for comments posted, as there are instances where email
notifications are delayed or blocked by your email.
1. Click on ‘View/Add Comments’ to view, respond, or add a comment.
2. Click ‘Add Comment.’
3. Please make sure to indicate the correct subject in the ‘Select Subject’ dropdown that
coordinates with the topic. For example, if you are submitting/responding to a comment on
your Self-Nomination form choose the ‘Self-Nomination’ category from the ‘Select Subject’
dropdown.
4. When ready to submit your comment, click ‘Send.’
5. Once a comment has been submitted, all ‘Watchers’ will receive an email notification.
CY 2024 Final Rule text:
Comments
How to View/Add Comment
Please periodically monitor for comments posted, as there are instances
where email notifications are delayed or blocked by your email.
1. Click on ‘VIEW/ADD COMMENTS’ to view, respond, or add a comment.
2. Click ‘ADD COMMENT.’
3. Please make sure to indicate the correct subject in the ‘Select Subject’ dropdown that
coordinates with the topic. For example, if you’re submitting/responding to a comment on your
Self-Nomination form choose the ‘Self-Nomination’ category from the ‘Select Subject’ dropdown.
4. When you’re ready to submit your comment, click ‘Send.’
5. Once a comment has been submitted, all ‘watchers’ will receive an email notification.
Change #31:
Location: Page 87-88
Reason for Change: Alignment with current year requirements, updates to align with PIMMS
Style Guide.
CY 2023 Final Rule text:
Resources
Help with Self-Nomination

•

•
•

Refer to the 2023 QCDR Fact Sheet and 2023 Qualified Registry Fact Sheet located in
the QPP Resource Library page. In addition, lists with the criteria used to audit and
validate data submitted in each of the MIPS performance categories will be available on
the website.
For assistance with completing the Self-Nomination form, the comment box may be used
to ask questions about populating form fields or submitting additional information. Refer
to “Comments” section of the User Guide for additional information.
For additional assistance regarding self-nomination criteria, contact the QPP at 1-866288-8292 or by email at: [email protected] (Monday through Friday from 8 a.m. to 8
p.m. ET). To receive assistance more quickly, please consider calling during non-peak
house, before 10 a.m. and after 2 p.m. ET. Customers who are hearing impaired can dial
711 to be connected to a TRS Communications Assistant. To avoid security
violations, do not include personal identifying information (PII) or protected health
information (PHI), such as Social Security Number or TIN, in email inquiries to the
QPP.

Help with QCDR Measure Development
•

•

•

Blueprint for the CMS Measures Management System - Provides a standardized system
for developing and maintaining the quality measures used in CMS’s various quality
initiatives and programs. The primary goal is to provide guidance to measure developers
to help them produce high-caliber healthcare quality measures and documents the core
set of business processes and decisions criteria when developing, implementing, and
maintaining measures.
Measure Development Plan - Is a focused framework to help CMS build and improve
quality measures that MIPS eligible clinicians, groups, virtual groups, APM Entities,
voluntary participants, and/or opt-in participants could report under the MIPS and as
participants in APM Entities (collectively known as the QPP).
QCDR Measure Development Handbook - Provides guidance and suggestions to QCDR
measure developers on QCDR measure structure, analytics, and types. As well as a
QCDR measure development checklist, resources for QCDR measure development and
definitions used by CMS to communicate QCDR measure review decisions. The QCDR
measure development handbook may be found in the Self-Nomination “Resources.”

CY 2024 Final Rule text:
Resources
Help with Self-Nomination
• Refer to the 2024 QCDR Fact Sheet and 2024 Qualified Registry Fact Sheet located in the
2024 Self-Nomination Toolkit for QCDRs and Registries. In addition, lists with the criteria used
to audit and validate data submitted in each of the MIPS performance categories will be
available on the website.
• For assistance with completing the Self-Nomination form, the comment box may be used to
ask questions about populating form fields or submitting additional information. Refer to the
‘Comments’ section of the user guide for additional information.
• For additional assistance regarding self-nomination criteria, contact the QPP at 1-866-2888292 or by email at: [email protected] (Monday through Friday from 8 a.m. to 8 p.m. ET).
Customers who are hearing impaired can dial 711 to be connected to a TRS Communications
Assistant. To avoid security violations, don’t include personally identifying information (PII) or

protected health information (PHI), such as a Social Security Number or TIN, in email inquiries
to QPP.
Help with QCDR Measure Development
• Blueprint content on the CMS Measures Management System (MMS) Hub - Provides a
standardized system for developing and maintaining the quality measures used in CMS’ various
quality initiatives and programs. This provides guidance to measure developers to help them
produce high-caliber healthcare quality measures and also documents the core set of business
processes and decision criteria when developing, implementing, and maintaining measures.
• Measure Development Plan – This is a focused framework to help CMS build and improve
quality measures that MIPS eligible clinicians, groups, virtual groups, APM Entities, voluntary
participants, and/or opt-in participants could report under MIPS and as participants in APM
Entities (collectively known as QPP).
• QCDR Measure Development Handbook - Provides guidance and suggestions to QCDR
measure developers on QCDR measure structure, analytics, and types. It also includes a
QCDR measure development checklist, resources for QCDR measure development and
definitions used by CMS to communicate QCDR measure review decisions. The QCDR
measure development handbook is found in the Self-Nomination form under ’Resources’.