Document

Combined Air Emissions Reporting System Initial or Annual

ICR 202610-2060-002 · OMB 2060-0558 · Object 173783300.

Document Viewer [pdf]

Status: Original and derived artifacts are available for this document.

Download: pdf

Primary: pdfSource: application/pdf
Loading document viewer…

Document Metadata

Record metadata
application/pdf
Combined Air Emissions Reporting System Initial or Annual
Sandra Brozusky
Acrobat PDFMaker 26 for PowerPoint
2026-08-19
2026-05-26
complete

Extracted Text

OMB Control No. 2060-0558 Expiration Date: 11/30/2026

United States Environmental Protection Agency Region 10 Federal Air Rules for Indian Reservations Initial / Annual
Source Registration
Applicability: Air pollution sources regulated by 40 Code
of Federal Regulations Part 49.138

This collection of information is approved by OMB under
the Paperwork Reduction Act, 44 U.S.C. 3501 et seq. (OMB
Control No. 2060-0558). Responses to this collection of
information are mandatory (40 CFR 49.132). An agency
may not conduct or sponsor, and a person is not required
to respond to, a collection of information unless it displays
a currently valid OMB control number. The public reporting
and recordkeeping burden for this collection of information
is estimated to be 5.61 hours per response. Send
comments on the Agency’s need for this information, the
accuracy of the provided burden estimates, and any
suggested methods for minimizing respondent burden,
including through the use of automated collection
techniques to the Regulatory Support Division Director,
U.S. Environmental Protection Agency (2821T), 1200
Pennsylvania Ave., NW, Washington, D.C. 20460. Include
the OMB control number in any correspondence. Do not
send the completed form to this address.

EPA Form PFN-3520-38

Enter your Tribal Name and
information about your
facility, then click “Search”.

Finding Your Facility
From the drop-down
menu, select your tribe
A list of facilities matching
your search terms will
appear. Select the facility
you want to report to.
When you do, the
“Request Access” button
will be active. Click on
“Request Access”

EPA Form PFN-3520-38

Enter part or all of
the facility’s name,
then click
“Search”.

Confirm Access to Facility

Make sure you have the right
facility, so you don’t have to go
through the process again. If
Region 10 staff find that your
name doesn’t match the
facility you must report to,
they will not accept your
request. If you have the
correct facility click “Confirm”.

EPA Form PFN-3520-38

Request Sent

You should wait for the SLT to approve your
request. You will get an email when this has
happened. Note that CDX emails are from the
system, you cannot reply to them and get a
response. They may also go to your spam
folder.
Repeat these steps for each facility you need
to report to.
EPA Form PFN-3520-38

Request Granted

Once the SLT has granted you access, you will be able to see
your facility on your “My Facilities” page, together with any
announcements from the SLT.
If you report to multiple facilities that are in different tribal
lands, you will see announcements for each of those tribal
lands on the right hand side of the screen.
Click on “Begin/Continue Reporting” to start your report.
EPA Form PFN-3520-38

Begin/Continue Report

Your next step would be to click on “Create New
Report” to start a new report. This year, the report
has already been started for you so you would click
“Continue”.

EPA Form PFN-3520-38

Your Facility Report Summary Page

EPA Form PFN-3520-38

Check your Facility Information

On the left-hand side click on
the “Facility Information” link
and your facility information will
appear. If anything isn’t correct,
let staff from Region 10 know
and do not certify your report
until the information has been
corrected.

EPA Form PFN-3520-38

Check/Edit/ Add Contact Information
In the same Facility
Information screen,
scroll down and click
edit to change or add
contact information.

EPA Form PFN-3520-38

Contact Information

Check with Region 10 staff
which contacts you must
include. Note that at least
one must be designated
“Emissions Inventory”
contact. Click Save when
you are done.
EPA Form PFN-3520-38

Enter Throughput Data

On the left-hand side menu, click on “Data Bulk
Entry”. Enter the amount of gasoline that was
held in the underground tanks for 2025. Click on
“Save Processes”. You will get a green pop-up
saying your data have been saved.

EPA Form PFN-3520-38

Calculate Emissions

Click on the Emissions
Information tab at the
top of the screen and
you will see emissions
for each unit and
process. Click “Save
Emissions.”

EPA Form PFN-3520-38

Attachments

If Region 10 requires
attachments for your
report, you can add those
by clicking on “Report
Summary” on the left
hand side menu. Scroll
down to the bottom of the
page and click on “Attach
report Document” and
follow the prompts.

EPA Form PFN-3520-38

Run QA Checks

Click on the “Annual
Report Quality Checks
link, then click on the
“Run Quality Checks”
button. You should get a
screen that shows
checks have been
completed without error.
If you get any red errors,
please reach out to
Region 10 staff for
assistance.

EPA Form PFN-3520-38

Ready to Certify

After running the QA checks go back to the “Report
Summary” page via the left-hand side link. Scroll
down. Click on “Ready to Certify” if you are the
Preparer and someone else signs the report.

EPA Form PFN-3520-38

Certify and Submit
After the preparer has passed
the QA checks and clicked on
“Ready to Certify” the certifier
will get an email that the report
is ready to sign.
The certifier will go into the
report and click on “Certify and
Submit to SLT” button at the
bottom of their screen.
If you both prepare and certify
the report, then after passing QA
checks you will see the “Certify
and Submit to SLT” button on the
bottom of the screen.
Follow the prompts to sign and
submit your report.
EPA Form PFN-3520-38