FGIS 9601 Repair/Modication Notice

FORM APPROVED OMB NO. 0580-0013 (FGIS-9601)
According to the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of
information unless it displays a valid OMB control number. The valid OMB control number for this information
collection is 0580-0013. The time required to complete this information collection is estimated to average 2
minutes per response and 2 minute of recordkeeping, including the time for reviewing instructions, searching
existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection
of information.

U.S. DEPARTMENT OF AGRICULTURE
GRAIN INSPECTION, PACKERS AND
STOCKYARDS ADMINISTRATION
FEDERAL GRAIN INSPECTION SERVICE
FIELD MANAGEMENT DIVISION

SERIAL NUMBER (Optional)

REPAIR/MODIFICATION NOTICE

DATE

NAME AND LOCATION OF FACILITY

TIME

AM
PM

REQUESTED BY
EMERGENCY BREAKDOWN
NON-EMERGENCY BREAKDOWN

PERSON NOTIFIED

MALFUNCTION NOTED
HANDLING/DELIVERY SYSTEM

SCALE(S) SYSTEM

GRAIN SPILLS(S)
REMARKS:

ACTION TO BE TAKEN BY FGIS
UNTIL REPAIR OR MODIFICATION IS COMPLETED, WEIGHT CERTIFICATION:
WILL BE DISCONTINUED
WILL CONTINUE
WILL CONTINUE UNDER THE FOLLOWING CONDTIONS:

DATE

REPAIR/MODIFICATION COMPLETED
TIME

AM
PM

_____________________________________________
(Name of Official Personnel)
FGIS-9601 (6/04) (Replaces Form FGIS-9601, 9/92 which may be used)

FORM APPROVED OMB NO. 0580-0013 (FGIS-9601)
According to the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of
information unless it displays a valid OMB control number. The valid OMB control number for this information
collection is 0580-0013. The time required to complete this information collection is estimated to average 2
minutes per response and 2 minute of recordkeeping, including the time for reviewing instructions, searching
existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection
of information.

U.S. DEPARTMENT OF AGRICULTURE
GRAIN INSPECTION, PACKERS AND
STOCKYARDS ADMINISTRATION
FEDERAL GRAIN INSPECTION SERVICE
FIELD MANAGEMENT DIVISION

REPAIR/MODIFICATION NOTICE

SERIAL NUMBER (Optional)

1.

NAME AND LOCATION OF FACILITY
2.

DATE

TIME

3.

AM
PM

4.

REQUESTED BY
6.

EMERGENCY BREAKDOWN
5.

NON-EMERGENCY BREAKDOWN

PERSON NOTIFIED
7.

MALFUNCTION NOTED
HANDLING/DELIVERY SYSTEM

SCALE(S) SYSTEM

8.

GRAIN SPILLS(S)
REMARKS:

ACTION TO BE TAKEN BY FGIS
UNTIL REPAIR OR MODIFICATION IS COMPLETED, WEIGHT CERTIFICATION:
WILL BE DISCONTINUED
9.

WILL CONTINUE
WILL CONTINUE UNDER THE FOLLOWING CONDTIONS:

DATE

10.

REPAIR/MODIFICATION COMPLETED
TIME
11.

12.

AM
PM

_____________________________________________
(Name of Official Personnel)

FGIS-9601 (6/04) (Replaces Form FGIS-9601, 9/92 which may be used)

Instructions for Use. To complete the Repair/Modification Notice, enter the following
information:
1.

Enter the scale serial number (optional).

2.

Enter the name and location of facility.

3.

Enter the date the form was prepared.

4.

Enter the time the form was prepared.

5.

Check block - emergency breakdown or non-emergency breakdown.

6.

Enter the name of official personnel (Supervisor or Scales Specialist)
requesting repair or modification.

7.

Enter the name of elevator person notified.

8.

Check appropriate block to fit malfunction and explain in remarks what
the malfunction is and its location.

9.

Check appropriate block and explain the conditions under which
weighing will continue.

10.

Enter the date of the completion of repair/modification.

11.

Enter the time the repair/modification was completed.

12.

Enter the name of the official inspection personnel who observed the
completion of the repair/modification.

Distribution. Complete the notice up to, and including, the "Action To Be Taken By
FGIS" section. Give the person notified of the necessary repairs or modifications a copy
of the notice. After the repairs or changes are made, complete the "Repair/Modification
Completed" section of the notice and send a copy to the field office.

CONTACT INFORMATION:
Contact the field office responsible for the geographic area in which the service is provided. Details for
these locations can be found at:
http://www.gipsa.usda.gov/GIPSA/webapp?area=forms&subject=landing&topic=fgis
For further information on the Repair/Modification Notice:
William Bates
Policies and Procedures Branch
Field Management Division
1400 Independence Avenue, SW, Room 2409 N
Washington, DC 20250-3630
Telephone 202-690-0961
Fax 202-720-1015
[email protected]