Certain Coated Paper from China and Indonesia (F)

INSTRUCTION BOOKLET

GENERAL INFORMATION, INSTRUCTIONS, AND
DEFINITIONS FOR COMMISSION FOREIGN
PRODUCER/EXPORTER QUESTIONNAIRES

CERTAIN COATED PAPER SUITABLE FOR HIGH-QUALITY
PRINT GRAPHICS USING SHEET-FED PRESSES FROM
CHINA AND INDONESIA
Investigation Nos. 701-TA-470-471 and 731-TA-1169-1170 (Final)

Further information.--If you have any questions concerning the enclosed
questionnaire(s) or other matters related to these investigations, you may contact
the following member of the Commission=s staff (Fax 202-205-3205):
Chris Cassise, investigator (202-708-5408; E-mail [email protected])

GENERAL INFORMATION
Background.--These investigations were instituted in response to a petition filed on September 23,
2009, by Appleton Coating, LLC, Kimberly, WI; NewPage Corp., Mianisburg, OH; Sappi Fine Paper North
America, Boston, MA; and the United Steel, Paper and Forestry, Rubber Manufacturing, Energy, Allied
Industrial and Service Workers International Union (“USW”). Antidumping and/or countervailing

duties may be assessed on the subject imports as a result of these investigations if the Commission
makes an affirmative determination of injury, threat, or material retardation, and if the U.S.
Department of Commerce makes an affirmative determination of subsidization and/or dumping.
Questionnaires and other information pertinent to these investigations are available at
http://www.usitc.gov/trade_remedy/731_ad_701_cvd/investigations/2009/coated_paper/fina
lphase.htm
Address all correspondence to the United States International Trade Commission, Washington,
DC 20436. Hearing-impaired individuals can obtain information regarding these investigations
via the Commission=s TDD terminal (202-205-1810).
Due date of questionnaire(s).--Return the completed questionnaire(s) to the United States
International Trade Commission by no later than August 2, 2010. Please make sure the completed
questionnaire is sent to the attention of Chris Cassise. Return only one copy of the completed
questionnaire(s), but please keep a copy for your records so that you can refer to it if the
Commission staff contacts you with any questions during the course of the investigations.
Service of questionnaire response(s).--In the event that your firm is a party to these investigations,
you are required to serve a copy of the questionnaire(s), once completed, on parties to the
proceeding that are subject to administrative protective order (see 19 CFR ' 207.7). A list of such
parties is maintained by the Commission=s Secretary and may be obtained by calling
202-205-1803. A certificate of service must accompany the copy of the completed questionnaire(s)
you submit (see 19 CFR ' 207.7).
Confidentiality.--The commercial and financial data furnished in response to the enclosed
questionnaire(s) that reveal the individual operations of your firm will be treated as confidential by
the Commission to the extent that such data are not otherwise available to the public and will not
be disclosed except as may be required by law (see 19 U.S.C. ' 1677f). Such confidential
information will not be published in a manner that will reveal the individual operations of your
firm; however, nonnumerical characterizations of numerical business proprietary information
(such as discussion of trends) will be treated as confidential business information only at the
request of the submitter for good cause shown.

2

GENERAL INFORMATION--Continued
Verification.--The information submitted in the enclosed questionnaire(s) is subject to audit
and verification by the Commission. To facilitate possible verification of data, please keep
all your workpapers and supporting documents used in the preparation of the questionnaire
response(s).
Release of information.--The information provided by your firm in response to the
questionnaire(s), as well as any other business proprietary information submitted by your firm to
the Commission in connection with the investigations, may become subject to, and released under,
the administrative protective order provisions of the Tariff Act of 1930 (19 U.S.C. ' 1677f) and
section 207.7 of the Commission=s Rules of Practice and Procedure (19 CFR ' 207.7). This means
that certain lawyers and other authorized individuals may temporarily be given access to the
information for use in connection with these investigations or other import-injury investigations
conducted by the Commission on the same or similar merchandise; those individuals would be
subject to severe penalties if the information were divulged to unauthorized individuals.

INSTRUCTIONS
Answer all questions.--Do not leave any question or section blank unless a questionnaire
expressly directs you to skip over certain questions or sections. If the answer to any question is
Anone,@ write Anone.@ If information is not readily available from your records in exactly the
form requested, furnish carefully prepared estimates--designated as such by the letter
AE@--and explain the basis of your estimates. Answers to questions and any necessary
comments or explanations should be supplied in the space provided or on separate sheets attached
to the appropriate page of the questionnaire(s). If your firm is completing more than one
questionnaire in connection with these investigations (i.e., a producer, importer, purchaser, and/or
foreign producer questionnaire), you need not respond to duplicated questions in the
questionnaires.
Consolidate all establishments.--Report the requested data for your establishment(s) located in
either China or Indonesia. Firms operating more than one establishment in either of those
countries should combine the data for all establishments located in a single country into a
single report.
Filing instructions.—Questionnaires may be filed either in paper form or electronically.

3

INSTRUCTIONS--Continued
OPTIONS FOR FILING IN PAPER FORM
• Overnight mail service.—Mail to the following address:
United States International Trade Commission
Office of Investigations, Room 615
500 E Street, SW
Washington, DC 20024
• Fax.—Fax to 202.205.3205.
• U.S. mail.—Mail to the address above, but use zip code 20436. This option is not recommended.
U.S. mail sent to government offices undergoes additional processing to screen for hazardous
materials; this additional processing results in substantial delays in delivery.
OPTIONS FOR FILING ELECTRONICALLY
This questionnaire is available as a “fillable” form in MS Word format on the
Commission’s website at
http://www.usitc.gov/trade_remedy/731_ad_701_cvd/investigations/2009/coat
ed_paper/finalphase.htm
Please do not attempt to modify the format or permissions of the questionnaire
document. You may complete the questionnaire electronically, print it out, and
submit it in paper form as described above, or you may submit it electronically
through one of the following means:
• Compact disc (CD).—Copy your questionnaire onto a CD, include a signed certification page
(page 1) (either in paper form or scanned PDF copied onto CD), and mail to the address above. It
is strongly recommended that you use an overnight mail service. U.S. mail sent to government
offices undergoes additional processing which not only results in substantial delays in delivery but
may also damage CDs.
• E-mail.—E-mail your questionnaire to the investigator identified on page 1 of the Instruction
Booklet; include a scanned PDF of the signed certification page (page 1). Type the following in
the e-mail subject line: BPI Questionnaire, Certain Coated Paper. Please note that submitting
your questionnaire by e-mail may subject your firm’s business proprietary information to
transmission over an unsecure environment and to possible disclosure. If you choose this option,
the Commission warns you that any risk involving possible disclosure of such information is
assumed by the submitter and not by the Commission.
Note: If you are a party to the investigations, and service of the questionnaire is required, such
service should be made in paper form.
4

DEFINITIONS
Certain Coated Paper Suitable For High-Quality Print Graphics Using Sheet-Fed Presses
(“Certain Coated Paper”).—Certain coated paper and paperboard in sheets suitable for high
quality print graphics using sheet-fed presses; coated on one or both sides with kaolin (China or
other clay), calcium carbonate, titanium dioxide, and/or other inorganic substances; with or
without a binder; having a GE brightness level of 80 or higher; weighing not more than 340 grams
per square meter; whether gloss grade, satin grade, matte grade, dull grade, or any other grade of
finish; whether or not surface-colored, surface decorated, printed (except as described below),
embossed, or perforated; and irrespective of dimensions (“certain coated paper”).
Certain coated paper includes (a) coated free sheet paper and paperboard that meets this scope
definition; (b) coated groundwood paper and paperboard produced from bleached
chemi-thermo-mechanical pulp (“BCTMP”) that meets this scope definition; and (c) any other
coated paper and paperboard that meets this scope definition.
Certain coated paper is typically (but not exclusively) used for printing multicolored graphics for
catalogues, books, magazines, envelopes, labels and wraps, greeting cards, and other commercial
printing applications requiring high quality print graphics.
Specifically excluded from the scope are imports of paper and paperboard printed with final
content printed text or graphics.
As of 2009, imports of the subject merchandise are provided for under the following categories of
the Harmonized Tariff Schedule of the United States (“HTSUS”): 4810.14.11, 4810.14.1900,
4810.14.2010, 4810.14.2090, 4810.14.5000, 4810.14.6000, 4810.14.70, 4810.19.1100,
4810.19.1900, 4810.19.2010, 4810.19.2090,4810.22.1000, 4810.22.50, 4810.22.6000, 4810.22.70,
4810.29.1000, 4810.29.5000, 4810.29.6000, 4810.29.70.
While HTSUS subheadings are provided for convenience and customs purposes, the written
description of the scope of the investigations is dispositive.
Please note that included in the scope of these investigations is coated multi-ply paperboard that
has a GE brightness level of 80 or higher; weighing not more than 340 grams per square meter,
regardless of grade or finish; whether or not surface-colored, surface decorated, printed (except
final content printed text or graphics), embossed, or perforated; and irrespective of dimensions.
Firm.--An individual proprietorship, partnership, joint venture, association, corporation
(including any subsidiary corporation), business trust, cooperative, trustee in bankruptcy, or
receiver under decree of any court.
Related firm.--A firm that your firm solely or jointly owned, managed, or otherwise controlled; a
firm that solely or jointly owned, managed, or otherwise controlled your firm; and/or a firm that
was solely or jointly owned, managed, or otherwise controlled by a firm that also solely or jointly
owned, managed, or otherwise controlled your firm.

5

Establishment.--Each facility of a firm in China or Indonesia involved in the production of certain
coated paper (as defined above), including auxiliary facilities operated in conjunction with
(whether or not physically separate from) such facilities.
United States.--For purposes of these investigations, the 50 States, Puerto Rico, the U.S. Virgin
Islands, and the District of Columbia.
Importer.--Any person or firm engaged, either directly or through a parent company or subsidiary,
in importing certain coated paper (as defined above) into the United States from a foreign
manufacturer or through its selling agent.
Average production capacity.--The level of production that your establishment(s) could
reasonably have expected to attain during the specified periods. Assume normal operating
conditions (i.e., using equipment and machinery in place and ready to operate; normal operating
levels (hours per week/weeks per year) and time for downtime, maintenance, repair, and cleanup;
and a typical or representative product mix).
Production.--All production in your establishment(s) in China or Indonesia, including production
consumed internally within your firm.
Shipments.--Shipments of products produced in your establishment(s) in China or Indonesia.
Quantities reported should be net of returns.
Home market commercial shipments.--Shipments, other than internal consumption and
transfers to related firms, within China or Indonesia.
Home market internal consumption/transfers to related firms.--Shipments made to
related firms in China or Indonesia, including product consumed internally by your firm.
Export shipments.--Shipments to destinations outside China or Indonesia, including
shipments to related firms.
Inventories.--Finished goods inventory, not raw materials or work-in-progress.

6