SUPPORTING STATEMENT FOR
49 CFR 566, MANUFACTURER IDENTIFICATION
OMB CONTROL # 2127-0043
JUSTIFICATION:
Explain the circumstances that make the collection of information necessary. Attach a copy of the appropriate statute or regulation mandating or authorizing the collection of information.
If a motor vehicle or item of replacement motor vehicle equipment contains a defect related to motor vehicle safety or fails to comply with an applicable Federal motor vehicle safety standard, the manufacturer is required under 49 U.S.C. § 30118 to furnish notification of the defect or noncompliance to the Secretary of Transportation, as well as to owners, purchasers, and dealers of the motor vehicle or replacement equipment, and to remedy the defect or noncompliance without charge to the owner. To ensure that manufacturers are meeting these and other responsibilities under the statutes and regulations administered by NHTSA, the agency issued 49 CFR Part 566, Manufacturer Identification. The regulations in Part 566 require manufacturers of motor vehicles or motor vehicle equipment, other than tires, to which a Federal motor vehicle safety standard (FMVSS) applies, to submit to NHTSA, on a one-time basis, identifying information on themselves and on the products that they manufacture to those standards. The information must be submitted no later than 30 days after the manufacturer begins to manufacture motor vehicles or motor vehicle equipment subject to the FMVSS. No specific form need be used for the submission of this information. Manufacturers who have previously submitted identifying information must ensure that the information on file is accurate and complete by submitting revised information no later than 30 days after a change in the business that affects the validity of that information has occurred.
2. Indicate how, by whom, and for what purpose the information is used. Indicate actual use of information received from the current collection.
Manufacturers are required to submit to NHTSA the following information:
Full individual, partnership or corporate name.
Residence address of the manufacturer and State of incorporation, if applicable.
Description of each type of motor vehicle or covered equipment item manufactured by the manufacturer.
The manufacturer must keep entries current, accurate and complete by submitting revised information, not later than 30 days after any change affecting the validity of the information on file has taken place.
The above-identified information is used by NHTSA to locate the manufacturer if a safety-related defect or noncompliance is suspected or found to exist in a motor vehicle or motor vehicle equipment item. The manufacturer forwards the information to NHTSA by mail, e-mail, or by fax transmission.
3. Describe whether the collection of information involves the use of technological collection techniques or other forms of information technology.
As previously noted, the required information can be submitted by e-mail or by fax.
4. Describe efforts to identify duplication. Show specifically why similar information cannot be used.
Manufacturers are required to submit identifying information to NHTSA no later than 30 days after they begin to manufacture motor vehicles or motor vehicle equipment subject to the FMVSS. After that initial submission, manufacturers are not required to submit any additional identifying information unless a change occurs in the information already on file with the agency. It is necessary that this information be furnished by the manufacturer so that NHTSA has accurate identifying information to use in the event that a safety-related defect or noncompliance should be suspected or found to exist in one of the manufacturer’s products. Any uncertainty as to the proper identification of the manufacturer could introduce unnecessary delays into the process of conducting any recall campaign that may be needed to address the defect or noncompliance. Manufacturers are not required to submit identifying information under any other regulation administered by NHTSA. As a consequence, there is no risk for duplication of effort on the manufacturer’s part.
5. If the collection of information involves small businesses or other small entities, describe the methods used to minimize the burdens.
Most manufacturers of motor vehicle and regulated items of motor vehicle equipment qualify as small businesses. The regulations in Part 566 require each such manufacturer to register with NHTSA. The information each manufacturer needs to provide is, however, very minimal, consisting of no more than the manufacturer’s name, address, State of incorporation if applicable, and a description of each type of motor vehicle or item of regulated equipment that it manufactures, including, for vehicles, the gross vehicle weight rating. Owing to the limited nature of this information, there is no need for any special procedure to be in pace to minimize the reporting burden on small entities.
6. Describe the consequence to Federal Program or policy activities if the information is not collected or collected less frequently.
If NHTSA were not to collect identifying information on manufacturers of the vehicles and equipment that it regulates, that would impair the agency’s ability to notify the responsible manufacturer, if the agency should suspect or find that a motor vehicle or equipment item contains a safety-related defect
7. Explain any special circumstances that require the information collection to be conducted in a manner inconsistent with the guidelines in 5 CFR 1320.6.
The information collection is fully consistent with the guidelines set forth in
5 CFR 1320.6
8. Provide a copy of the FEDERAL REGISTER document soliciting comments on the conduct of the collection of information, a summary of all public comments responding to the notice, and a description of the agency’s actions in response to the comments. Describe efforts to consult with persons outside the agency to obtain their views.
NHTSA solicited public comments on the reinstatement of this information collection by notice published on July 20, 2009 at 74 FR 35227. No comments were received in response to the notice and no additional efforts were made to consult with persons outside the agency to obtain their views.
9. Explain any decision to provide any payment or gift to respondents, other than remuneration of contractors or grantees.
No payment or gift will be provided to any respondent.
10. Describe any assurance of confidentiality provided to respondents.
No assurance of confidentiality is given for the information collected under Part 566. All information provided to NHTSA for Part 566 purposes, consisting of the names and address of commercial entities and a description of the products they manufacture to the Federal motor vehicle safety standards, is considered public information. This precludes the need for any assurance of confidentiality to be given.
Provide additional justification for any questions on matters that are commonly considered private.
The information which is requested of the manufacturer is not of a private nature.
Provide estimates of the hour burden of the collection of information on the respondents.
Approximately 200 new manufacturers, in addition to those that relocate, submit information yearly. We estimate that it takes 10 minutes to prepare the information. The total burden for all respondents for this requirement is 33 hours. The information is submitted only once unless there is a name change, or the business has relocated and/or has changed the type of vehicles or equipment it manufactures.
Provide estimates of the total annual cost to the respondents or record-keepers.
Assuming that it costs $20 per hour to prepare the information, the estimated costs associated with the burden hours required to prepare the Part 566 submissions on the part of all affected entities is approximately $670.
14. Provide estimates of the annualized cost to the Federal Government.
No additional cost incurred.
15. Explain the reasons for any program changes or adjustments reported in Items 13 or 14 of the OMB Form 83-I.
There is a program change of reinstating this information collection request into NHTSA overall ICR program, which will results in adding 33 burden hours.
16. For collections of information whose results will be published, outline plans for tabulation, and publication.
The information submitted under Part 566 will be posted to the agency’s website at. At this time it will not be published in any other form.
If seeking approval to not display the expiration date for OMB approval of the information collection, explain the reasons that display would be inappropriate.
NHTSA does not seek such approval.
Explain each exception to the certification statement identified in Item 19, Certification for Paperwork Reduction Act Submissions,” of OMB Form 83-I.
No exceptions to the certification statement are made.
| File Type | application/vnd.openxmlformats-officedocument.wordprocessingml.document |
| File Title | The National Highway Traffic Safety Administration's statute at 49 U |
| Author | dcoleman |
| File Modified | 0000-00-00 |
| File Created | 2021-02-02 |