Terms of the
previous clearance remain in effect. OMB is withholding approval at
this time. Prior to publication of the final rule, the agency
should provide a summary of any comments related to the information
collection and their response, including any changes made to the
ICR as a result of comments. In addition, the agency must enter the
correct burden estimates. This action has no effect on any current
approvals.
Inventory as of this Action
Requested
Previously Approved
06/30/2013
06/30/2013
06/30/2013
1,053
0
1,053
47,189
0
47,189
18,000
0
18,000
This ICR covers information collection
requirements in the proposed amendments to the Wood Furniture
NESHAP (40 CFR part 63, subpart JJ). The potential respondents are
owners or operators of any existing or new affected source with
wood furniture manufacturing operations. There are an estimated 406
facilities subject to the Wood Furniture Manufacturing NESHAP. The
affected source is any wood furniture manufacturing facility that
is engaged, either in part or in whole, in the manufacture of wood
furniture or wood furniture components and that is located at a
plant site that is a major source as defined in 40 CFR part 63.2,
excluding sources that meet the criteria established in ?63.800(a).
(b), and (c) of the Wood Furniture Manufacturing NESHAP. The
proposed amendments would prohibit the use of conventional spray
guns used in wood furniture coating operations; add a new
formaldehyde emission limit of 400 pound per 12-month rolling
average; and revise the reporting requirements.
On behalf of this Federal agency, I certify that
the collection of information encompassed by this request complies
with 5 CFR 1320.9 and the related provisions of 5 CFR
1320.8(b)(3).
The following is a summary of the topics, regarding
the proposed collection of information, that the certification
covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a
benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control
number;
If you are unable to certify compliance with any of
these provisions, identify the item by leaving the box unchecked
and explain the reason in the Supporting Statement.