12-4-2982 Foreign Producer Questionnaire

OMB No. 3117-0016/USITC No. xx-x-xxx; Expiration Date: 6/30/2014
(No response is required if currently valid OMB control number is not displayed)

FOREIGN PRODUCERS’/EXPORTERS’ QUESTIONNAIRE
CIRCULAR WELDED CARBON-QUALITY STEEL PIPE FROM INDIA, OMAN,
UNITED ARAB EMIRATES, AND VIETNAM

This questionnaire must be received by the Commission by no later than November 9, 2011.
See page 4 of the Instruction Booklet for filing instructions.
The information called for in this questionnaire is for use by the United States International Trade
Commission in connection with its countervailing and antidumping duty investigation(s) concerning
circular welded carbon-quality steel pipe (“circular welded pipe”) from India, Oman, United Arab
Emirates, and Vietnam (Inv. Nos. 701-TA-482-485 and 731-TA-1191-1194 (Preliminary)). The
information requested in the questionnaire is requested under the authority of the Tariff Act of 1930, title
VII.

Name of firm
Address
World Wide Web address
Has your firm produced or exported circular welded carbon-quality steel pipe (“circular welded pipe”) (as defined
in the instruction booklet) at any time since January 1, 2008?

NO

(Sign the certification below and promptly return only this page of the questionnaire to the Commission)

YES

(Read the instruction booklet carefully, complete all parts of the questionnaire, and return the entire
questionnaire to the Commission so as to be received by the date indicated above)

CERTIFICATION
I certify that the information herein supplied in response to this questionnaire is complete and correct to the best of my knowledge
and belief and understand that the information submitted is subject to audit and verification by the Commission.
By means of this certification I also grant consent for the Commission, and its employees and contract personnel, to use the
information provided in this questionnaire and throughout this proceeding in any other import-injury proceedings conducted by
the Commission on the same or similar merchandise.
I acknowledge that information submitted in this questionnaire response and throughout this proceeding may be used by the
Commission, its employees, and contract personnel who are acting in the capacity of Commission employees, for developing or
maintaining the records of this proceeding or related proceedings for which this information is submitted, or in internal audits and
proceedings relating to the programs and operations of the Commission pursuant to 5 U.S.C. Appendix 3. I understand that all
contract personnel will sign non-disclosure agreements.

Name of Authorized Official

Title of Authorized Official
Phone: (

Date

)

Signature

E-mail address
Fax (

)

Business Proprietary
Foreign Producers’/Exporters’ Questionnaire – Circular Welded Pipe

Page 2

PART I.—GENERAL INFORMATION
The questions in this questionnaire have been reviewed with market participants to ensure that issues of
concern are adequately addressed and that data requests are sufficient, meaningful, and as limited as
possible. Public reporting burden for this questionnaire is estimated to average 20 hours per response,
including the time for reviewing instructions, searching existing data sources, gathering the data needed,
and completing and reviewing the questionnaire. Send comments regarding the accuracy of this burden
estimate or any other aspect of this collection of information, including suggestions for reducing the
burden, to the Office of Investigations, U.S. International Trade Commission, 500 E Street, SW,
Washington, DC 20436.
I-1a.

OMB statistics.--Please report below the actual number of hours required and the cost to your
firm of preparing the reply to this questionnaire and completing the form.
hours

dollars

I-1b.

OMB feedback.--We are interested in any comments you may have for improving this
questionnaire in general or the clarity of specific questions. Please attach such comments to your
response or send them to the above address.

I-2.

Establishments covered.--Provide the name and address of establishment(s) covered by this
questionnaire (see page 3 of the instruction booklet for reporting guidelines). If your firm is
publicly traded, please specify the stock exchange and trading symbol.

I-3.

U.S. importers.--Please provide the names, street addresses (not P.O. boxes), contacts, telephone
numbers, and e-mail addresses of the FIVE largest U.S. importers of your firm’s circular welded
pipe in 2010.

No.

1

2

3

4

5

Importer’s name

Contact person

E-mail address

Area
code and
telephone
number

Share of
your 2010
exports
(%)

Business Proprietary
Foreign Producers’ Questionnaire – Circular Welded Pipe

Page 3

PART I.--GENERAL INFORMATION--Continued
I-4.

Related U.S. producers.--Does your firm or any related firm produce, have the capability to
produce, or have any plans to produce circular welded pipe in the United States or other
countries?
No

I-5.

Yes--Please name the firm(s) and country(ies) below and, if U.S. producer(s),
ensure that they complete the Commission’s producer questionnaire
(contact Keysha Martinez, [email protected], for copies of that
questionnaire).

Related U.S. importers.--Does your firm or any related firm import or have any plans to import
circular welded pipe into the United States?
No

Yes--Please name the firm(s) below and ensure that they complete the
Commission’s importer questionnaire (contact Keysha Martinez,
[email protected], for copies of that questionnaire).

Business Proprietary
Foreign Producers’ Questionnaire – Circular Welded Pipe

Page 4

PART II.--TRADE AND RELATED INFORMATION
Further information on this part of the questionnaire can be obtained from Keysha Martinez (202-2052136, [email protected]). Supply all data requested on a calendar-year basis.
II-1.

Please identify the individual to be contacted regarding the confidential information requested in
part II.
Name and title:
Please indicate the manner by which Commission staff may contact the individual responsible for
part II with questions regarding the submitted confidential information.
E-mail:
Fax: (

II-2.

Telephone: (

)

)

Changes in operations.--Please indicate whether your firm has experienced any of the following
changes in relation to the production of circular welded pipe since January 1, 2008.
(check as many as appropriate)
(please describe)
plant openings ..........................

plant closings ............................

relocations ................................

expansions ................................

acquisitions ...............................

consolidations ...........................

prolonged shutdowns or
importation curtailments ................
revised labor agreements ..........

other (e.g., technology) ............

Business Proprietary
Foreign Producers’ Questionnaire – Circular Welded Pipe

Page 5

PART II.--TRADE AND RELATED INFORMATION--Continued
II-3.

Anticipated changes in operations.--Does your firm anticipate any changes in the character of
your operations or organization (as noted above) relating to the production of circular welded
pipe in the future?
No

Yes–Supply details as to the time, nature, and significance of such changes
and provide underlying assumptions, along with relevant portions of
business plans or other supporting documentation that address this
issue. Include in your response a specific projection of your firm’s
capacity to produce circular welded pipe (in short tons) for 2011 and
2012.

Business Proprietary
Foreign Producers’ Questionnaire – Circular Welded Pipe

Page 6

PART II.--TRADE AND RELATED INFORMATION--Continued
II-4.

Same equipment, machinery, and workers.--Has your firm since 2008 produced, or does your
firm anticipate producing in the future, other products on the same equipment and machinery
used in the production of circular welded pipe?
No

Yes--List the following information and report your firm’s combined
production capacity and production of these products and circular
welded pipe in the periods indicated.

Product

Period

Basis for allocation of capacity data

Circular welded pipe
Line pipe (less than 16” O.D.)
Line pipe (more than 16” O.D.)
Mechanical tubing
OCTG
Other:

(Quantity in short tons)
Calendar years
Item

2008

2009

January-September
2010

Overall production capacity
Production of:
Subject merchandise1
Line pipe (up to 16” O.D.)
Line pipe (above 16” O.D.)
Mechanical tubing
OCTG
Other2
All products
1

Production should equal the volumes reported in response to question II-10.
2
Please describe:
_____

2010

2011

Business Proprietary
Foreign Producers’ Questionnaire – Circular Welded Pipe

Page 7

PART II.--TRADE AND RELATED INFORMATION--Continued
II-5.

Constraints on production.--Please describe the constraint(s) that set the limit(s) on your
production capacity.

II-6.

Production shifting.--Is your firm able to switch production between circular welded pipe and
other products in response to a relative change in the price of circular welded pipe vis-a-vis the
price of other products, using the same equipment and labor?
No

II-7.

Yes---Please identify the other products, the approximate time and cost
involved in switching, and the minimum relative price change required
for your firm to switch production to or from circular welded pipe.

Share of sales.--What percentage of your firm’s total sales in its most recent fiscal year was
represented by sales of circular welded pipe?
Percent

Business Proprietary
Foreign Producers’ Questionnaire – Circular Welded Pipe

Page 8

PART II.--TRADE AND RELATED INFORMATION--Continued
II-8.

Inventories in the United States.--Has your firm, since 2008, maintained any inventories of
circular welded pipe in the United States (not including inventories held by firms identified in
question I-3)?
No

Yes--Report the quantity of such end-of-period inventories below.

(Quantity in short tons)
January-September
Item

2008

2009

2010

2010

2011

Inventory

II-9.

Barriers.-(a)

Are your firm’s exports of circular welded pipe subject to tariff or non-tariff barriers to
trade (for example, antidumping or countervailing duty findings or remedies, tariffs,
quotas, or regulatory barriers) in any countries other than the United States?
No

Yes--List the products(s), country(ies), the year each such barrier was
imposed, and the type of barrier.
Product

(b)

Country

Year imposed

Barrier (if tariff,
give rate)

Are your firm’s exports of circular welded pipe subject to current proceedings in any
countries other than the United States that might result in tariff or non-tariff barriers to
trade?
No

Yes--List the products(s), country(ies), and type of proceeding.
Product

Country

Type of proceeding

Business Proprietary
Foreign Producers’ Questionnaire – Circular Welded Pipe

Page 9

PART II.--TRADE AND RELATED INFORMATION--Continued
II-10a. Report your firm’s production capacity, production, shipments, and inventories related to the
production of circular welded pipe in your establishment(s) in India during the specified periods.
(See definitions in the instruction booklet.)

INDIA
Quantity (in short tons)
Actual experience
January-September
Item

2008

2009

2010

2010

2011

1

Projections
2011

2012

2

Average production capacity

Beginning-of-period inventories3
Production4
Shipments:
Internal consumption/transfers
Home market sales
Exports to-United States5
All other export markets6
Total exports
Total shipments
End-of-period inventories
1

Please explain the basis for your projections.

2

The production capacity (see definitions in instruction booklet) reported is based on operating
hours per week,
weeks per year. Please describe the methodology used to calculate production capacity, and explain any changes in
reported capacity.

3

Reconciliation of data.--Please note that the quantities reported above should reconcile as follows: beginning-of-period
inventories, plus production, less total shipments, equals end-of-period inventories. Do the data reported reconcile?
Yes

No--Please explain:

4

Please estimate the percentage of total production of circular welded pipe in India accounted for by your firm’s
production in 2010.
Percent
5

Please estimate the percentage of total exports to the United States of circular welded pipe from India accounted for by
your firm’s exports in 2010.
Percent
6

Identify principal other export markets.

Business Proprietary
Foreign Producers’ Questionnaire – Circular Welded Pipe

Page 10

PART II.--TRADE AND RELATED INFORMATION--Continued
II-10b. Report your firm’s production capacity, production, shipments, and inventories related to the
production of circular welded pipe in your establishment(s) in Oman during the specified periods.
(See definitions in the instruction booklet.)

OMAN
Quantity (in short tons)
Actual experience
January-September
Item

2008

2009

2010

2010

2011

1

Projections
2011

2012

2

Average production capacity

Beginning-of-period inventories3
Production4
Shipments:
Internal consumption/transfers
Home market sales
Exports to-United States5
All other export markets6
Total exports
Total shipments
End-of-period inventories
1

Please explain the basis for your projections.

2

The production capacity (see definitions in instruction booklet) reported is based on operating
hours per week,
weeks per year. Please describe the methodology used to calculate production capacity, and explain any changes in
reported capacity.

3

Reconciliation of data.--Please note that the quantities reported above should reconcile as follows: beginning-of-period
inventories, plus production, less total shipments, equals end-of-period inventories. Do the data reported reconcile?
Yes

No--Please explain:

4

Please estimate the percentage of total production of circular welded pipe in Oman accounted for by your firm’s
production in 2010.
Percent
5

Please estimate the percentage of total exports to the United States of circular welded pipe from Oman accounted for by
your firm’s exports in 2010.
Percent
6

Identify principal other export markets.

Business Proprietary
Foreign Producers’ Questionnaire – Circular Welded Pipe

Page 11

PART II.--TRADE AND RELATED INFORMATION--Continued
II-10c. Report your firm’s production capacity, production, shipments, and inventories related to the
production of circular welded pipe in your establishment(s) in UAE during the specified periods.
(See definitions in the instruction booklet.)

UNITED ARAB EMIRATES (UAE)
Quantity (in short tons)
Actual experience
January-September
Item

2008

2009

2010

2010

2011

1

Projections
2011

2012

2

Average production capacity

Beginning-of-period inventories3
Production4
Shipments:
Internal consumption/transfers
Home market sales
Exports to-United States5
All other export markets6
Total exports
Total shipments
End-of-period inventories
1

Please explain the basis for your projections.

2

The production capacity (see definitions in instruction booklet) reported is based on operating
hours per week,
weeks per year. Please describe the methodology used to calculate production capacity, and explain any changes in
reported capacity.

3

Reconciliation of data.--Please note that the quantities reported above should reconcile as follows: beginning-of-period
inventories, plus production, less total shipments, equals end-of-period inventories. Do the data reported reconcile?
Yes

No--Please explain:

4

Please estimate the percentage of total production of circular welded pipe in UAE accounted for by your firm’s
production in 2010.
Percent
5

Please estimate the percentage of total exports to the United States of circular welded pipe from UAE accounted for by
your firm’s exports in 2010.
Percent
6

Identify principal other export markets.

Business Proprietary
Foreign Producers’ Questionnaire – Circular Welded Pipe

Page 12

PART II.--TRADE AND RELATED INFORMATION--Continued
II-10d. Report your firm’s production capacity, production, shipments, and inventories related to the
production of circular welded pipe in your establishment(s) in Vietnam during the specified
periods. (See definitions in the instruction booklet.)

VIETNAM
Quantity (in short tons)
Actual experience
January-September
Item

2008

2009

2010

2010

2011

1

Projections
2011

2012

2

Average production capacity

Beginning-of-period inventories3
Production4
Shipments:
Internal consumption/transfers
Home market sales
Exports to-United States5
All other export markets6
Total exports
Total shipments
End-of-period inventories
1

Please explain the basis for your projections.

2

The production capacity (see definitions in instruction booklet) reported is based on operating
hours per week,
weeks per year. Please describe the methodology used to calculate production capacity, and explain any changes in
reported capacity.

3

Reconciliation of data.--Please note that the quantities reported above should reconcile as follows: beginning-of-period
inventories, plus production, less total shipments, equals end-of-period inventories. Do the data reported reconcile?
Yes

No--Please explain:

4

Please estimate the percentage of total production of circular welded pipe in Vietnam accounted for by your firm’s
production in 2010.
Percent
5

Please estimate the percentage of total exports to the United States of circular welded pipe from Vietnam accounted for
by your firm’s exports in 2010.
Percent
6

Identify principal other export markets.