OMB is
withholding approval at this time. Prior to publication of the
final rule, the agency should provide a summary of any comments
related to the information collection and their response, including
any changes made to the ICR as a result of comments. In addition,
the agency must enter the correct burden estimates. This action has
no effect on any current approvals.
Inventory as of this Action
Requested
Previously Approved
36 Months From Approved
0
0
0
0
0
0
0
0
0
The National Emission Standards for
Hazardous Air Pollutants (NESHAP) for Pulp and Paper Production
were proposed on December 17, 1993, and promulgated on April 15,
1998. Amendments to the Pulp and Paper Production NESHAP are being
proposed as a result of the residual risk and technology review
(RTR) required under by the Clean Air Act (as discussed further
below). The Pulp and Paper Production NESHAP applies to facilities
that produce pulp, paper, or paperboard by employing kraft, soda,
sulfite, semi-chemical, or mechanical pulping processes using wood;
or any process using secondary or non-wood fiber and that emits 10
tons per year or more of any hazardous air pollutant or 25 tons per
year or more of any combination of hazardous air pollutants.
Affected sources are all the hazardous air pollutant (HAP) emission
points or the HAP emission points in the pulping and bleaching
system for mechanical pulping processes using wood and any process
using secondary or non-wood fiber. This information is being
collected to assure compliance with 40 CFR Part 63, subpart
S.
Burden changed due amendments
to the Pulp and Paper Production NESHAP are being proposed as a
result of the residual risk and technology review (RTR) required
under by the Clean Air Act.
On behalf of this Federal agency, I certify that
the collection of information encompassed by this request complies
with 5 CFR 1320.9 and the related provisions of 5 CFR
1320.8(b)(3).
The following is a summary of the topics, regarding
the proposed collection of information, that the certification
covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a
benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control
number;
If you are unable to certify compliance with any of
these provisions, identify the item by leaving the box unchecked
and explain the reason in the Supporting Statement.