Download:
pdf |
pdfOMB No. 3117-0016/USITC No. 13-1-3066; Expiration Date: 6/30/2014
(No response is required if currently valid OMB control number is not displayed)
U.S. PRODUCERS’ QUESTIONNAIRE
STEEL WIRE GARMENT HANGERS FROM TAIWAN AND VIETNAM
This questionnaire must be received by the Commission by no later than September 12, 2012
See page 4 of the Instruction Booklet for filing instructions.
The information called for in this questionnaire is for use by the United States International Trade Commission in
connection with its antidumping and countervailing duty investigations concerning steel wire garment hangers from
Taiwan and Vietnam (Investigation Nos. 701-TA-487 and 731-TA-1197-1198 (Final)). The information requested in the
questionnaire is requested under the authority of the Tariff Act of 1930, title VII. This report is mandatory and failure to
reply as directed can result in a subpoena or other order to compel the submission of records or information in your
possession (19 U.S.C. § 1333(a)).
Name of firm
Address
City
State
Zip Code
World Wide Web address
Has your firm produced steel wire garment hangers (as defined in the instruction booklet) at any time since
January 1, 2009?
NO
(Sign the certification below and promptly return only this page of the questionnaire to the Commission)
YES
(Read the instruction booklet carefully, complete all parts of the questionnaire, and return the entire
questionnaire to the Commission so as to be received by the date indicated above)
CERTIFICATION
I certify that the information herein supplied in response to this questionnaire is complete and correct to the best of my knowledge
and belief and understand that the information submitted is subject to audit and verification by the Commission.
By means of this certification I also grant consent for the Commission, and its employees and contract personnel, to use the
information provided in this questionnaire and throughout this proceeding in any other import-injury proceedings conducted by
the Commission on the same or similar merchandise.
I acknowledge that information submitted in this questionnaire response and throughout this proceeding may be used by the
Commission, its employees, and contract personnel who are acting in the capacity of Commission employees, for developing or
maintaining the records of this proceeding or related proceedings for which this information is submitted, or in internal audits and
proceedings relating to the programs and operations of the Commission pursuant to 5 U.S.C. Appendix 3. I understand that all
contract personnel will sign non-disclosure agreements.
Name of Authorized Official
Title of Authorized Official
Date
Phone:
Signature
E-mail address
Fax:
Business Proprietary
U.S. Producers’ Questionnaire – Steel Wire Garment Hangers
Page 2
PART I.—GENERAL INFORMATION
The questions in this questionnaire have been reviewed with market participants to ensure that issues of
concern are adequately addressed and that data requests are sufficient, meaningful, and as limited as
possible. Public reporting burden for this questionnaire is estimated to average 50 hours per response,
including the time for reviewing instructions, searching existing data sources, gathering the data needed,
and completing and reviewing the questionnaire. Send comments regarding the accuracy of this burden
estimate or any other aspect of this collection of information, including suggestions for reducing the
burden, to the Office of Investigations, U.S. International Trade Commission, 500 E Street, SW,
Washington, DC 20436.
I-1a.
OMB statistics.--Please report below the actual number of hours required and the cost to your
firm of preparing the reply to this questionnaire and completing the form.
hours
dollars
I-1b.
OMB feedback.--We are interested in any comments you may have for improving this
questionnaire in general or the clarity of specific questions. Please attach such comments to your
response or send them to the above address.
I-2.
Establishments covered.--Provide the name and address of establishment(s) covered by this
questionnaire (see page 3 of the instruction booklet for reporting guidelines). If your firm is
publicly traded, please specify the stock exchange and trading symbol.
I-3.
Petition support.--Do you support or oppose the petition?
Support
Oppose
Take no position
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 3
PART I.--GENERAL INFORMATION--Continued
I-4.
Ownership.--Is your firm owned, in whole or in part, by any other firm?
No
Firm name
I-5.
Address
Extent of
ownership
Related importers/exporters.--Does your firm have any related firms, either domestic or
foreign, that are engaged in importing steel wire garment hangers from Taiwan and Vietnam into
the United States or that are engaged in exporting steel wire garment hangers from Taiwan and
Vietnam to the United States?
No
Firm name
I-6.
Yes--List the following information.
Yes--List the following information.
Address
Affiliation
Related producers.--Does your firm have any related firms, either domestic or foreign, that are
engaged in the production of steel wire garment hangers?
No
Firm name
Yes--List the following information.
Address
Affiliation
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 4
PART II.--TRADE AND RELATED INFORMATION
Further information on this part of the questionnaire can be obtained from Jennifer Merrill (202-2053188, [email protected]). Supply all data requested on a calendar-year basis.
II-1.
Contact information.-- Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted in
part II.
Name
Title
Email
Telephone
Fax
II-2.
Changes in operations.--Please indicate whether your firm has experienced any of the following
changes in relation to the production of steel wire garment hangers since January 1, 2009.
(check as many as appropriate)
plant openings ..............................
plant closings................................
relocations ....................................
expansions ....................................
acquisitions...................................
consolidations...............................
prolonged shutdowns or
production curtailments................
revised labor agreements ..............
other (e.g., technology) ................
(please describe)
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 5
PART II.--TRADE AND RELATED INFORMATION--Continued
II-3.
Same equipment, machinery, and workers.--Has your firm since 2009 produced, or does your
firm anticipate producing in the future, other products on the same equipment and machinery
used in the production of steel wire garment hangers and/or using the same production and related
workers employed to produce steel wire garment hangers?
No
Yes--List the following information and report your firm’s combined
production capacity and production of these products and steel wire
garment hangers in the periods indicated.
Product
Period
Basis for allocation of capacity and
employment data (indicate if different)
(Quantity in 1,000 hangers)
Calendar years
Item
2009
2010
January-June
2011
2011
2012
Overall Production Capacity
Production of:
Subject merchandise
Other product 1
Other product 2
II-4.
Production constraints and product shifting.--Please describe the constraint(s) that set the limit(s)
on your production capacity and your ability to shift production capacity between products.
II-5.
Tolling.--Since January 1, 2009, has your firm been involved in a toll agreement (see definition
in the instruction booklet) regarding the production of steel wire garment hangers?
No
II-6.
.
Foreign trade zone.--Does your firm produce steel wire garment hangers in a foreign trade zone
(FTZ)?
No
II-7.
Yes--Name firm(s):
Yes--Identify FTZ(s):
.
Importer.--Since January 1, 2009, has your firm imported steel wire garment hangers?
No
Yes--COMPLETE AND RETURN A U.S. IMPORTERS’ QUESTIONNAIRE
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 6
PART II.--TRADE AND RELATED INFORMATION--Continued
II-8.
Trade data.--Report your firm’s production capacity, production, shipments, inventories, and
employment related to the production of steel wire garment hangers in your U.S. establishment(s)
during the specified periods. (See definitions in the instruction booklet.)
Quantity (in 1,000 hangers) and value (in $1,000)
Calendar years
Item
2009
2010
January-June
2011
2011
2012
Average production capacity1 (quantity)
Beginning-of-period inventories (quantity)
Production (quantity)
U.S. shipments:
Commercial shipments:
Quantity of commercial shipments
Value of commercial shipments
Internal consumption:
Quantity of internal consumption
Value2 of internal consumption
Transfers to related firms:
Quantity of transfers
Value2 of transfers
Export shipments:3
Quantity of export shipments
Value of export shipments
End-of-period inventories4 (quantity)
Channels of distribution:
U.S. shipments to distributors (quantity)
U.S. shipments to end users (quantity)
Employment data:
Average number of PRWs (number)
Hours worked by PRWs (1,000 hours)
Wages paid to PRWs (value)
1
The production capacity (see definitions in instruction booklet) reported is based on operating
hours per week,
weeks per year. Please describe the methodology used to calculate production capacity, and explain any changes in
reported capacity (use additional pages as necessary).
2
Internal consumption and transfers to related firms must be valued at fair market value. In the event that you use a
different basis for valuing these transactions, please specify that basis (e.g., cost, cost plus, etc.) and provide value data
using that basis for each of the periods noted above:
3
Identify your principal export markets:
.
Reconciliation of data.--Please note that the quantities reported above should reconcile as follows: beginning-of-period
inventories, plus production, less total shipments, equals end-of-period inventories. Do the data reported reconcile?
4
Yes
No--Please explain:
.
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 7
PART II.--TRADE AND RELATED INFORMATION--Continued
II-9.
Related firms.--If you reported transfers to related firms in question II-8, please indicate the
nature of the relationship between your firm and the related firms (e.g., joint venture, wholly
owned subsidiary), whether the transfers were priced at market value or by a non-market formula,
whether your firm retained marketing rights to all transfers, and whether the related firms also
processed inputs from sources other than your firm.
II-10.
Purchases.--Other than direct imports, has your firm otherwise purchased steel wire garment
hangers since January 1, 2009? (See definitions in the instruction booklet.)
Yes--Report such purchases below for the specified periods.1
No
(Quantity in 1,000 hangers, value in $1,000)
Calendar years
Item
2009
2010
January-June
2011
2011
2012
PURCHASES FROM U.S. IMPORTERS2
OF STEEL WIRE GARMENT HANGERS
FROM—Taiwan and Vietnam:
Quantity
Value
All other countries:
Quantity
Value
PURCHASES FROM DOMESTIC
2
PRODUCERS:
Quantity
Value
PURCHASES FROM OTHER SOURCES:2
Quantity
Value
1
Please indicate your reasons for purchasing this product. If your reasons differ by source, please elaborate.
2
Please list the name of the firm(s) from which you purchased this product. If your suppliers differ by source,
please identify the source for each listed supplier.
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 8
PART II.--TRADE AND RELATED INFORMATION--Continued
II-11.
Report your firm’s U.S. shipments of the below-listed types of garment hangers that were
produced by your firm’s U.S. establishment(s) in 2011.
Type of hanger
Quantity in 1,000 hangers
Value in $1,000
Steel wire garment hangers:
Shirt hangers
Suit hangers
Strut hangers
Caped hangers
Drapery hangers
Uniform rental hangers
Other steel wire garment hangers1
TOTAL2
1
2
Describe:
The quantity and value reported here should equal total U.S. shipments (i.e., commercial
shipments plus internal consumption plus transfers to related firms) as reported on the page 6 (i.e.,
question II-8).
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 9
PART II.--TRADE AND RELATED INFORMATION--Continued
II-12. Report your firm’s U.S. shipments of the below-listed garment hangers (by coating regardless of
paper attachments) that were produced by your firm’s U.S. establishment(s) in 2011.
Type of coating
(regardless of paper attachment)
Quantity in 1,000 hangers
Value in $1,000
Steel wire garment hangers:
Plain (i.e., uncoated) hangers
Painted hangers
Galvanized hangers
Epoxy-coated hangers
Latex-coated hangers
Vinyl-coated hangers
Other steel wire garment hangers1
TOTAL2
1
2
Describe:
The quantity and value reported here should equal total U.S. shipments (i.e., commercial
shipments plus internal consumption plus transfers to related firms) as reported on the page 6 (i.e.,
question II-8).
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 10
PART III.--FINANCIAL INFORMATION
Address questions on this part of the questionnaire to Mary Klir (202-205-3247, [email protected]).
III-1.
Contact information.-- Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted in
part III.
Name
Title
Email
Telephone
Fax
III-2.
Accounting system.--Briefly describe your financial accounting system.
A.
When does your fiscal year end (month and day)?
If your fiscal year changed during the period examined, explain below:
B.1.
Describe the lowest level of operations (e.g., plant, division, company-wide) for
which financial statements are prepared that include steel wire garment hangers:
2.
3.
4.
Does your firm prepare profit/loss statements for the steel wire garment hangers:
Yes
No
How often did your firm (or parent company) prepare financial statements
(including annual reports, 10Ks)? Please check relevant items below.
Audited,
unaudited,
annual reports,
10Ks,
10Qs,
Monthly,
quarterly,
semi-annually,
annually
Accounting basis:
GAAP,
cash,
tax, or
other comprehensive
basis of accounting (specify)
Note: The Commission may request that your company submit copies of its financial statements,
including internal profit-and-loss statements for the division or product group that includes steel
wire garment hangers, as well as those statements and worksheets used to compile data for your
firm’s questionnaire response.
III-3.
Cost accounting system.--Briefly describe your cost accounting system (e.g., standard cost, job
order cost, etc.).
______
III-4.
Allocation basis.--Briefly describe your allocation basis, if any, for COGS, SG&A, and interest
expense and other income and expenses.
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 11
PART III.--FINANCIAL INFORMATION--Continued
III-5.
Other products.--Please list any other products you produced in the facilities in which you
produced steel wire garment hangers, and provide the share of net sales accounted for by these
other products in your most recent fiscal year:
Products
Share of sales
%
%
%
%
%
III-6.
Does your firm purchase inputs (raw materials, labor, energy, or any other services) used in the
production of steel wire garment hangers from any related firms?
Yes--Continue to question III-7 below.
III-7.
Inputs from related firms.--In the space provided below, identify the inputs used in the
production of steel wire garment hangers that your firm purchases from related parties.
Related party
Input
III-8.
No--Continue to question III-9 below.
Inputs from related firms at cost.--All intercompany profit on inputs purchased from related
parties should be eliminated from the costs reported to the Commission in question III-10 (i.e.,
costs reported in question III-10 should only reflect the related party’s cost and not include an
associated profit component). Reasonable methods for determining and eliminating the
associated profit on inputs purchased from related parties are acceptable.
Has your firm complied with the Commission’s instructions regarding costs associated with
inputs purchased from related parties?
Yes
No
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 12
PART III.--FINANCIAL INFORMATION--Continued
III-9.
Nonrecurring items (charges and gains) reported in steel wire garment hangers financial
results.--For each annual and interim period for which financial results are reported in question
III-10, please specify all material (significant) nonrecurring items (charges and gains) in the
schedule below, the specific table III-10 line item where the nonrecurring items are included, a
brief description of the relevant nonrecurring items, and the associated values (in $1,000), as
reflected in table III-10; i.e., if an aggregate nonrecurring item has been allocated to table III-10,
only the allocated value amount included in table III-10 should be reported in the schedule below.
Note: The Commission’s objective here is to gather information only on material (significant)
nonrecurring items which impacted the reported steel wire garment hangers financial results in
table III-10.
Fiscal years ended--
January-June
2011
Nonrecurring item: In this column please provide a
brief description of each nonrecurring item and indicate
the specific table III-10 line item where the nonrecurring
item is included.
1.
2.
3.
4.
5.
6.
7.
2012
Nonrecurring item: In these columns please report the amount (in
$1,000) of the relevant nonrecurring item reported in table III-10.
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 13
PART III.--FINANCIAL INFORMATION--Continued
III-10. Operations on steel wire garment hangers.--Report the revenue and related cost information
requested below on the steel wire garment hangers operations of your U.S. establishment(s).1 Do
not report resales of products. Note that internal consumption and transfers to related
firms must be valued at fair market value and purchases from related firms must be at
cost.2 Provide data for your three most recently completed fiscal years in chronological order
from left to right, and for the specified interim periods.
Quantity (in 1,000 hangers) and value (in $1,000)
Fiscal years ended-Item
January-June
2011
2012
Net sales quantities:3
Commercial sales (“CS”)
Internal consumption (“IC”)
Transfers to related firms (“Transfers”)
Total net sales quantities
Net sales values:3
Commercial sales
Internal consumption
Transfers to related firms
Total net sales values
Cost of goods sold (COGS):4
Raw materials
Direct labor
Other factory costs
Total COGS
Gross profit or (loss)
Selling, general, and administrative
(SG&A) expenses:
Selling expenses
General and administrative expenses
Total SG&A expenses
Operating income (loss)
Other income and expenses:
Interest expense
All other expense items
All other income items
All other income or expenses, net
Net income or (loss) before income taxes
Depreciation/amortization included above
1
Include only sales (whether domestic or export) and costs related to your U.S. manufacturing operations.
Please eliminate any profits or (losses) on inputs from related firms pursuant question III-8.
3
Less discounts, returns, allowances, and prepaid freight. The quantities and values should approximate the corresponding
shipment quantities and values reported in Part II of this questionnaire.
4
COGS should include costs associated with CS, IC, and Transfers, as well as export shipments in question II-8.
2
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 14
PART III.--FINANCIAL INFORMATION--Continued
III-11. Asset values.--Report the total assets (i.e., both current and long-term assets) associated with the
production, warehousing, and sale of steel wire garment hangers. If your firm does not maintain
some or all of the specific asset information necessary to calculate total assets for steel wire
garment hangers in the normal course of business, please estimate this information based upon a
method (such as production, sales, or costs) that is consistent with your cost allocations in the
previous question. Provide data as of the end of your three most recently completed fiscal years
in chronological order from left to right.
Note: Total assets should reflect net assets after any accumulated depreciation and allowances deducted.
Total assets should be allocated to the subject products if these assets are also related to other products.
Please provide a brief explanation if there are any substantial changes in total asset value during the
period; e.g., due to asset write-offs, revaluation, and major purchases.
Value (in $1,000)
Fiscal years ended-Item
Total assets (net)
III-12. Capital expenditures and research and development expenses.--Report your firm’s capital
expenditures and research and development expenses on steel wire garment hangers. Provide
data for your three most recently completed fiscal years in chronological order from left to right,
and for the specified interim periods.
Value (in $1,000)
Fiscal years ended-Item
January-June
2011
2012
Capital expenditures
Research and development expenses
III-13. Data consistency and reconciliation.--Please indicate whether your financial data for questions
III-10, 11, and 12 are based on a calendar year or your fiscal year:
Calendar year
Fiscal year
Please note the quantities and values reported in question III-10 should reconcile with the data
reported in question II-8 (including export shipments) as long as they are reported on the same
calendar year basis.
Do these data in question III-10 reconcile with data in question II-8?
Yes
No--Please explain
________________________
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 15
PART III.--FINANCIAL INFORMATION--Continued
III-14. Effects of imports.--Since January 1, 2009, has your firm experienced any actual negative effects
on its return on investment or its growth, investment, ability to raise capital, existing development
and production efforts (including efforts to develop a derivative or more advanced version of the
product), or the scale of capital investments as a result of imports of steel wire garment hangers
from Taiwan and Vietnam?
No
Yes--My firm has experienced actual negative effects as follows:
Cancellation, postponement, or rejection of expansion projects
Denial or rejection of investment proposal
Reduction in the size of capital investments
Rejection of bank loans
Lowering of credit rating
Problem related to the issue of stocks or bonds
Other (specify)
III-15. Anticipated effects of imports.--Does your firm anticipate any negative effects due to imports of
steel wire garment hangers from Taiwan and Vietnam?
No
Yes--My firm anticipates negative effects as follows:
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 16
PART IV.--PRICING AND RELATED INFORMATION
Further information on this part of the questionnaire can be obtained from Clark Workman (202-2053248, [email protected]).
IV-1.
Contact information.--Please identify the individual that Commission staff may contact
regarding the confidential information submitted in part IV.
Name
Title
Email
Telephone
Fax
PRICE DATA
IV-2.
This question requests quarterly quantity and value data, f.o.b. your U.S. point of shipment, for
your commercial shipments to unrelated U.S. customers since January 1, 2009 of the following
products produced by your firm.
Product 1.-- 18-inch shirt hangers
Product 2.-- 13 gauge / 16-inch plain caped hangers
Product 3.-- 13 gauge / 16-inch stock print caped hangers
Product 4.— 16-inch strut hangers
Product 5.-- 13 gauge / 16-inch latex hangers (long neck)
Please note that total dollar values should be f.o.b., U.S. point of shipment and should not include
U.S.-inland transportation costs. Total dollar values should reflect the final net amount paid to you
(i.e., should be net of all deductions for discounts or rebates). See instruction booklet.
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 17
PART IV.--PRICING AND RELATED INFORMATION--Continued
IV-2.
1
Pricing data.--Report below the quarterly price data for pricing products2 produced and sold by
your firm. Value is requested in ACTUAL DOLLARS not $1,000s dollars.
Period of shipment
2009:
January-March
April-June
July-September
October-December
2010:
January-March
April-June
July-September
October-December
2011:
January-March
April-June
July-September
October-December
2012:
January-March
April-June
(Quantity in 1,000 hangers, value in dollars)
Product 1
Product 2
Product 3
Quantity
Value
Quantity
Value
Quantity
Value
Product 4
Quantity
Value
Product 5
Period of shipment
Quantity
Value
2009:
January-March
April-June
July-September
October-December
2010:
January-March
April-June
July-September
October-December
2011:
January-March
April-June
July-September
October-December
2012:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods),
f.o.b. your U.S. point of shipment.
2
Pricing product definitions are provided on the first page of Part IV.
Note.--If your product does not exactly meet the product specifications but is competitive with the specified product, provide a
description of your product. Also, please explain any anomalies in your reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Product 5:
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 18
PART IV.--PRICING AND RELATED INFORMATION--Continued
IV-3.
Price setting.-- How does your firm determine the prices that it charges for sales of steel wire
garment hangers (check all that apply)? If your firm issues price lists, please submit sample
pages of a recent list.
Transaction
by
transaction
IV-4.
Other
If other, describe
Discount policy.-- Please indicate and describe your firm’s discount policies (check all that
apply).
Quantity
discounts
IV-5.
Contracts
Set
price
lists
Annual
total
volume
discounts
No
discount
policy
Other
Describe
Pricing terms for steel wire garment hangers.-(a)
What are your firm’s typical sales terms for its U.S.-produced steel wire garment
hangers?
Net 30 days
(b)
Net 60 days
2/10 net 30 days
Other (specify)
On what basis are your prices of domestic steel wire garment hangers usually quoted
(check one)?
Delivered
F.o.b.
If f.o.b., specify point
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 19
PART IV.--PRICING AND RELATED INFORMATION--Continued
IV-6.
Contract versus spot.--Approximately what share of your firm’s sales of its U.S.-produced steel
wire garment hangers in 2011 was on a (1) long-term contract basis, (2) short-term contract basis,
and (3) spot sales basis?
Share of
2011 sales
Type of sale
Long-term contracts (multiple deliveries for more
than 12 months)
%
Short-term contracts (multiple deliveries up to and
including 12 months)
%
Spot sales (for a single delivery)
%
Total
IV-7.
100
%
Contract provisions.— Please fill out the table with respect to provisions of your typical sales
contracts for steel wire garment hangers (or check “not applicable” if your firm does not sell on a
long term and/or short term contract basis).
Typical sales contract
provisions
Item
Average contract duration
Number of days
Price renegotiation (during the
contract period)
Yes
Short term contracts
Long term contracts
(multiple deliveries up to
and including 12 months)
(multiple deliveries for more
than 12 months)
No
Quantity
Fixed quantity and/or price
Price
Both
Yes
Meet or release provision
No
Not applicable
IV-8.
Lead times.--What is your share of sales both from inventory and produced to order and what is
the average lead time between a customer’s order and the date of delivery for your firm’s sales of
your U.S.-produced steel wire garment hangers?
Source
Share of
2011 sales
From inventory
%
Produced to order
%
Total
100 %
Lead time (days)
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 20
PART IV.--PRICING AND RELATED INFORMATION--Continued
IV-9.
Shipping information.-(a)
What is the approximate percentage of the total delivered cost of steel wire garment
hangers that is accounted for by U.S. inland transportation costs?
%
(b)
Who generally arranges the transportation to your customers’ locations?
Your firm
Purchaser (check one)
(c)
Indicate the approximate percentage of your sales of steel wire garment hangers that are
delivered the following distances from your production facility.
Distance from production facility
Share
Within 100 miles
%
101 to 1,000 miles
%
Over 1,000 miles
%
Total
100
%
IV-10. Geographical shipments.-- What is the geographic market area in the United States served by
your firm’s shipments of steel wire garment hangers? (check all that apply)
Geographic area
√ if applicable
Northeast.–CT, ME, MA, NH, NJ, NY, PA, RI, and VT.
Midwest.–IL, IN, IA, KS, MI, MN, MO, NE, ND, OH, SD, and WI.
Southeast.–AL, DE, DC, FL, GA, KY, MD, MS, NC, SC, TN, VA, and WV.
Central Southwest.–AR, LA, OK, and TX.
Mountains.–AZ, CO, ID, MT, NV, NM, UT, and WY.
Pacific Coast.–CA, OR, and WA.
Other.–All other markets in the United States not previously listed, including AK, HI,
PR, and VI, among others.
IV-11. End uses.--List the end uses of the steel wire garment hangers that you manufacture. For each
end-use product, what percentage of the total cost is accounted for by steel wire garment hangers
and other inputs?
Share of total cost of end use product
accounted for by
End use product
Steel wire garment
hangers (percent)
Other inputs (percent)
Total
%
%
100%
%
%
100%
%
%
100%
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 21
PART IV.--PRICING AND RELATED INFORMATION--Continued
IV-12. Substitutes.-- Can other products be substituted for steel wire garment hangers?
No
Substitute
Yes--Please fill out the table.
End use in which this
substitute is used
Have changes in the prices of this substitute
affected the price for steel wire garment
hangers?
No Yes
Explanation
1.
2.
3.
IV-13. Demand trends.-- Indicate how demand within the United States and outside of the United States
(if known) for steel wire garment hangers has changed since January 1, 2009. Describe the
principal factors that have affected these changes in demand.
Market
No
Increase change Decrease Fluctuate
Factors
Within
the United
States
Outside
the United
States
IV-14. Product changes.--Have there been any significant changes in the product range, product mix, or
marketing of steel wire garment hangers since January 1, 2009?
No
Yes--Please describe and quantify if possible.
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 22
PART IV.--PRICING AND RELATED INFORMATION--Continued
IV-15. Business cycles.-(a) Is the U.S. steel wire garment hangers market subject to business cycles or conditions of
competition (including seasonal business) distinctive to steel wire garment hangers?
No (skip to question IV-16.)
Yes-- Please describe below and then answer part (b).
(b) If yes, have there been any changes in the business cycles or conditions of competition for
steel wire garment hangers since January 1, 2009?
No
Yes-- Please describe.
IV-16. Supply constraints.--Has your firm refused, declined, or been unable to supply steel wire
garment hangers since January 1, 2009 (examples include placing customers on allocation or
“controlled order entry,” declining to accept new customers or renew existing customers,
delivering less than the quantity promised, been unable to meet timely shipment commitments,
etc.)?
No
Yes-- Please describe.
IV-17. Raw materials.--Please describe any trends in the prices of raw materials used to produce steel
wire garment hangers and whether your firm expects these trends to continue.
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 23
PART IV.--PRICING AND RELATED INFORMATION--Continued
IV-18. Interchangeability.—Are steel wire garment hangers produced in the United States and in other
countries interchangeable (i.e., can they physically be used in the same applications)?
Please indicate A, F, S, N, or 0 in the table below:
A = the products from a specified country-pair are always interchangeable
F = the products are frequently interchangeable
S = the products are sometimes interchangeable
N = the products are never interchangeable
0 = no familiarity with products from a specified country-pair
Country-pair
Taiwan
Vietnam
China
Mexico
Other countries
United States
Please identify
country:
Taiwan
Please identify
country:
Vietnam
Please identify
country:
China
Please identify
country:
Mexico
Please identify
country:
For any country-pair producing steel wire garment hangers that is sometimes or never
interchangeable, please explain the factors that limit or preclude interchangeable use:
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 24
PART IV.--PRICING AND RELATED INFORMATION--Continued
IV-19. Factors other than price.--Are differences other than price (i.e., quality, availability,
transportation network, product range, technical support, etc.) between steel wire garment
hangers produced in the United States and in other countries a significant factor in your firm’s
sales of the products?
Please indicate A, F, S, N, or 0 in the table below:
A = such differences are always significant
F = such differences are frequently significant
S = such differences are sometimes significant
N = such differences are never significant
0 = no familiarity with products from a specified country-pair
Country-pair
Taiwan
Vietnam
China
Mexico
Other countries
United States
Please identify
country:
Taiwan
Please identify
country:
Vietnam
Please identify
country:
China
Please identify
country:
Mexico
Please identify
country:
For any country-pair for which factors other than price always or frequently are a significant
factor in your firm’s sales of steel wire garment hangers, identify the country-pair and report the
advantages or disadvantages imparted by such factors:
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 25
PART IV.--PRICING AND RELATED INFORMATION--Continued
IV-20. Customer identification--Please identify the names and contact information for your firm’s
10 largest U.S. customers for steel wire garment hangers since January 1, 2009. Indicate the
share of the quantity of your firm’s total U.S. shipments of steel wire garment hangers that each
of these customers accounted for in 2011.
Customer’s name
1
Contact person
Email
Telephone
Street address (not P.O.
box), city, state, and zip
code
Street Address
,
City
2
State
Street Address
,
City
3
State
,
State
,
State
,
State
,
State
,
State
,
State
Zip Code
Street Address
,
City
10
Zip Code
Street Address
City
9
Zip Code
Street Address
City
8
Zip Code
Street Address
City
7
Zip Code
Street Address
City
6
Zip Code
Street Address
City
5
Zip Code
Street Address
City
4
Zip Code
State
Zip Code
Street Address
,
City
State
Zip Code
Share
of 2011
sales
(%)
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 26
PART IV.--PRICING AND RELATED INFORMATION--Continued
IV-21. COMPETITION FROM IMPORTS--LOST REVENUES.-Since January 1, 2009: To avoid losing sales to competitors selling steel wire garment hangers
from Taiwan and Vietnam, did your firm:
Reduce prices
No
Yes
Roll back announced price increases
No
Yes
PLEASE DO NOT RE-SUBMIT ALLEGATIONS PROVIDED IN THE PRELIMINARY
PHASE OF THIS PROCEEDING. (Note: petitioners may provide allegations involving
quotes made AFTER the filing of the petition.)
If you indicated “yes” above, please furnish the following information for each affected
transaction. If possible, provide documentation (e.g., copies of invoices, sales reports, or letters
from customers). The Commission may contact firms named to verify the allegations reported.
Customer name, contact person, phone and fax numbers
Specific product(s) involved
Date of your initial price quotation
Quantity involved
Your initial rejected price quotation (total delivered value)
Your accepted price quotation (total delivered value)
The country of origin of the competing imported product
The competing price quotation of the imported product (total delivered value)
Customer name,
contact person,
phone and fax
numbers
Firm
Contact
Phone
Fax
Firm
Contact
Phone
Fax
Firm
Contact
Phone
Fax
Firm
Contact
Phone
Fax
Product
Date of
quote
Quantity
(1,000)
Initial rejected
U.S. price (total
value--dollars)
Accepted
U.S. price
(total value-dollars)
Country
of origin
Competing
import price
(total
value—
dollars)
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
Page 27
PART IV.--PRICING AND RELATED INFORMATION--Continued
IV-22. COMPETITION FROM IMPORTS--LOST SALES.—
Since January 1, 2009: Did your firm lose sales of steel wire garment hangers to imports of these
products?
No
Yes
PLEASE DO NOT RE-SUBMIT ALLEGATIONS PROVIDED IN THE PRELIMINARY
PHASE OF THIS PROCEEDING. (Note: petitioners may provide allegations involving
quotes made AFTER the filing of the petition.)
If you indicated “yes” above, please furnish the following information for each affected
transaction. If possible, provide documentation (e.g., copies of invoices, sales reports, or letters
from customers). Please note that the Commission may contact the firms named to verify the
allegations reported.
Customer name, contact person, phone and fax numbers
Specific product(s) involved
Date of your price quotation
Quantity involved
Your rejected price quotation (total delivered value)
The country of origin of the competing imported product
The accepted price quotation of the imported product (total delivered value)
Customer name,
contact person,
phone and fax
numbers
Firm
Contact
Phone
Fax
Firm
Contact
Phone
Fax
Firm
Contact
Phone
Fax
Firm
Contact
Phone
Fax
Product
Date of
quote
Quantity
(1,000)
Rejected
U.S. price
(total value-dollars)
Country of
origin
Competing
import price
(total
value—
dollars)
Business Proprietary
U.S. Producers’ Questionnaire - Steel Wire Garment Hangers
PART IV.--PRICING AND RELATED INFORMATION--Continued
Page 28
| File Type | application/pdf |
| File Title | Microsoft Word - US Producer Questionnaire |
| Author | jennifer.merrill |
| File Modified | 2012-08-09 |
| File Created | 2012-08-09 |