Download:
pdf |
pdfOMB No. 1140-0005 (07/31/2013)
U.S. Department of Justice
Bureau of Alcohol, Tobacco, Firearms and Explosives
Application and Permit for Importation of
Firearms, Ammunition and Implements of War
Not for use by Members of the United States Armed Forces.
For ATF Use Only
Permit No. (Valid for 12 months from the date appearing in Item 19 below.) NPR
No.
Internal Control/Reference #
For Applicant's Optional Use
Section I - Application (Submit in triplicate) - For Applicant Use
1. Federal Firearms License (If Any)
License No. (x-xx-xxx-xx-xxxxx)
Expiration Date
2. Telephone No. (Including 3. Country of Exportation
Extension No.)
4. Name and Address of Customs Broker (Including Zip Code)
E-mail Address (Optional)
5. Applicant's Name and Address (Including Zip Code)
Check here if permit is to be returned to Customs Broker.
Check here if permit is to be returned to applicant.
6. Name and Address of Foreign Seller, if any
7. Name and Address of Foreign Shipper
8. Description of Firearms and Ammunition (For firearms, enter (SG)-Shotgun; (RI)-Rifle; (PI)-Pistol; (RE)-Revolver; (DD)-Destructive Device; (MG)-Machinegun)
Type
Unit
U.S.
Model
Length
Overall
Serial
New (N)
Name and Address
Caliber Quantity
of Manufacturer
b.
Guage (Each type) Cost (U.S. Munitions
or Size
Currency) Import List
Category
c.
d.
e.
f.
g.
of
Barrel
(Inches)
Length
(Inches)
No.
or
Used (U)
h.
i.
j.
k.
Firearms
a.
(Frame,
Receiver,
SG, RI, PI,
RE,DD,MG)
See Attachement
Implements of
War
Description
Ammunition
9. Certification of Origin. The items sought for importation
in block 8:
a. Do not contain parts or components produced by or
for the U.S. military and do not contain parts or comSee Attachement
ponents manufactured with U.S. military technical
data or assistance.
(Ball Wadb. Contain parts or components produced by or for the
cutter,
U.S. military or parts or components manufactured
Shot, AP,
with U.S. military technical data or assistance.
Tracer)
c. Contain parts or components produced by or for the
(Rounds)
U.S. military or components manufactured with U.S.
technical data or assistance that were sold abroad
pursuant to a Direct Commercial Sale licensed by the
See Attachement
Department of State.
10. Specific Purpose of Importation, Including Final Recipient, If Known (Use additional sheets, if necessary)
11. Are You Registered as an Importer Pursuant to The Arms Export
Control Act of 1976
Yes
No
12. If "Yes," Give Importer's Registration No. and Expiration Date (A-xx-xxx-xxxx)
Under the penalties provided by law, I declare that I have examined this application, including the documents submitted in support of it, and, to the best of my knowledge and
belief, it is true, correct, and complete.
13. Name of Applicant (Printed)
14. Signature of Applicant
15. Title
16. Date
Section II - For ATF Use Only (Please make no entries in this section)
17. The Application Has Been Examined and the Importation of the Firearms, Ammunition, and Implements of War Described Herein is:
Disapproved for the Reason Indicated
Returned Without Action for Additional
Approved
Here or on Attached Letter
Information
Partially Approved for the Reason
No Permits Required
Withdrawn By Applicant Without Action
Indicated Here or on Attached Letter
18. Signature of the Director, Bureau of Alcohol, Tobacco, Firearms and Explosives
19. Date
ATF E-Form 6-Part I (5330.3A)
Revised August 2011
OMB No. 1140-0005 (07/31/2013)
U.S. Department of Justice
Bureau of Alcohol, Tobacco, Firearms and Explosives
Application and Permit for Importation of
Firearms, Ammunition and Implements of War
Not for use by Members of the United States Armed Forces.
For ATF Use Only
Permit No. (Valid for 12 months from the date appearing in Item 19 below.) NPR
No.
Internal Control/Reference #
For Applicant's Optional Use
Section I - Application (Submit in triplicate) - For Applicant Use
1. Federal Firearms License (If Any)
License No. (x-xx-xxx-xx-xxxxx)
Expiration Date
2. Telephone No. (Including 3. Country of Exportation
Extension No.)
4. Name and Address of Customs Broker (Including Zip Code)
E-mail Address (Optional)
5. Applicant's Name and Address (Including Zip Code)
Check here if permit is to be returned to Customs Broker.
Check here if permit is to be returned to applicant.
6. Name and Address of Foreign Seller, if any
7. Name and Address of Foreign Shipper
8. Description of Firearms and Ammunition (For firearms, enter (SG)-Shotgun; (RI)-Rifle; (PI)-Pistol; (RE)-Revolver; (DD)-Destructive Device; (MG)-Machinegun)
Type
Unit
U.S.
Model
Length
Overall
Serial
New (N)
Name and Address
Caliber Quantity
of Manufacturer
b.
Guage (Each type) Cost (U.S. Munitions
or Size
Currency) Import List
Category
c.
d.
e.
f.
g.
of
Barrel
(Inches)
Length
(Inches)
No.
or
Used (U)
h.
i.
j.
k.
Firearms
a.
(Frame,
Receiver,
SG, RI, PI,
RE,DD,MG)
See Attachement
Implements of
War
Description
Ammunition
9. Certification of Origin. The items sought for importation
in block 8:
a. Do not contain parts or components produced by or
for the U.S. military and do not contain parts or comSee Attachement
ponents manufactured with U.S. military technical
data or assistance.
(Ball Wadb. Contain parts or components produced by or for the
cutter,
U.S. military or parts or components manufactured
Shot, AP,
with U.S. military technical data or assistance.
Tracer)
c. Contain parts or components produced by or for the
(Rounds)
U.S. military or components manufactured with U.S.
technical data or assistance that were sold abroad
pursuant to a Direct Commercial Sale licensed by the
See Attachement
Department of State.
10. Specific Purpose of Importation, Including Final Recipient, If Known (Use additional sheets, if necessary)
11. Are You Registered as an Importer Pursuant to The Arms Export
Control Act of 1976
Yes
No
12. If "Yes," Give Importer's Registration No. and Expiration Date (A-xx-xxx-xxxx)
Under the penalties provided by law, I declare that I have examined this application, including the documents submitted in support of it, and, to the best of my knowledge and
belief, it is true, correct, and complete.
13. Name of Applicant (Printed)
14. Signature of Applicant
15. Title
16. Date
Section II - For ATF Use Only (Please make no entries in this section)
17. The Application Has Been Examined and the Importation of the Firearms, Ammunition, and Implements of War Described Herein is:
Disapproved for the Reason Indicated
Returned Without Action for Additional
Approved
Here or on Attached Letter
Information
Partially Approved for the Reason
No Permits Required
Withdrawn By Applicant Without Action
Indicated Here or on Attached Letter
18. Signature of the Director, Bureau of Alcohol, Tobacco, Firearms and Explosives
19. Date
ATF E-Form 6-Part I (5330.3A)
Revised August 2011
OMB No. 1140-0005 (07/31/2013)
U.S. Department of Justice
Bureau of Alcohol, Tobacco, Firearms and Explosives
Application and Permit for Importation of
Firearms, Ammunition and Implements of War
Not for use by Members of the United States Armed Forces.
For ATF Use Only
Permit No. (Valid for 12 months from the date appearing in Item 19 below.) NPR
No.
Internal Control/Reference #
For Applicant's Optional Use
Section I - Application (Submit in triplicate) - For Applicant Use
1. Federal Firearms License (If Any)
License No. (x-xx-xxx-xx-xxxxx)
Expiration Date
2. Telephone No. (Including 3. Country of Exportation
Extension No.)
4. Name and Address of Customs Broker (Including Zip Code)
E-mail Address (Optional)
5. Applicant's Name and Address (Including Zip Code)
Check here if permit is to be returned to Customs Broker.
Check here if permit is to be returned to applicant.
6. Name and Address of Foreign Seller, if any
7. Name and Address of Foreign Shipper
8. Description of Firearms and Ammunition (For firearms, enter (SG)-Shotgun; (RI)-Rifle; (PI)-Pistol; (RE)-Revolver; (DD)-Destructive Device; (MG)-Machinegun)
Type
Unit
U.S.
Model
Length
Overall
Serial
New (N)
Name and Address
Caliber Quantity
of Manufacturer
b.
Guage (Each type) Cost (U.S. Munitions
or Size
Currency) Import List
Category
c.
d.
e.
f.
g.
of
Barrel
(Inches)
Length
(Inches)
No.
or
Used (U)
h.
i.
j.
k.
Firearms
a.
(Frame,
Receiver,
SG, RI, PI,
RE,DD,MG)
See Attachement
Implements of
War
Description
Ammunition
9. Certification of Origin. The items sought for importation
in block 8:
a. Do not contain parts or components produced by or
for the U.S. military and do not contain parts or comSee Attachement
ponents manufactured with U.S. military technical
data or assistance.
(Ball Wadb. Contain parts or components produced by or for the
cutter,
U.S. military or parts or components manufactured
Shot, AP,
with U.S. military technical data or assistance.
Tracer)
c. Contain parts or components produced by or for the
(Rounds)
U.S. military or components manufactured with U.S.
technical data or assistance that were sold abroad
pursuant to a Direct Commercial Sale licensed by the
See Attachement
Department of State.
10. Specific Purpose of Importation, Including Final Recipient, If Known (Use additional sheets, if necessary)
11. Are You Registered as an Importer Pursuant to The Arms Export
Control Act of 1976
Yes
No
12. If "Yes," Give Importer's Registration No. and Expiration Date (A-xx-xxx-xxxx)
Under the penalties provided by law, I declare that I have examined this application, including the documents submitted in support of it, and, to the best of my knowledge and
belief, it is true, correct, and complete.
13. Name of Applicant (Printed)
14. Signature of Applicant
15. Title
16. Date
Section II - For ATF Use Only (Please make no entries in this section)
17. The Application Has Been Examined and the Importation of the Firearms, Ammunition, and Implements of War Described Herein is:
Disapproved for the Reason Indicated
Returned Without Action for Additional
Approved
Here or on Attached Letter
Information
Partially Approved for the Reason
No Permits Required
Withdrawn By Applicant Without Action
Indicated Here or on Attached Letter
18. Signature of the Director, Bureau of Alcohol, Tobacco, Firearms and Explosives
19. Date
ATF E-Form 6-Part I (5330.3A)
Revised August 2011
Firearms (Continued)
Name and Address
of Manufacturer
a.
Type
(Frame,
Receiver,
SG, RI, PI,
RE,DD,MG)
b.
Unit
U.S.
Caliber Quantity
Guage (Each type) Cost (U.S. Munitions
or Size
Currency) Import List
Category
c.
d.
e.
f.
Model
Length
of
Barrel
(Inches)
Overall
Length
(Inches)
Serial
No.
New (N)
or
Used (U)
g.
h.
i.
j.
k.
ATF E-Form 6-Part I (5330.3A)
Revised August 2011
Firearms (Continued)
Name and Address
of Manufacturer
a.
Type
(Frame,
Receiver,
SG, RI, PI,
RE,DD,MG)
b.
Unit
U.S.
Caliber Quantity
Guage (Each type) Cost (U.S. Munitions
or Size
Currency) Import List
Category
c.
d.
e.
f.
Model
Length
of
Barrel
(Inches)
Overall
Length
(Inches)
Serial
No.
New (N)
or
Used (U)
g.
h.
i.
j.
k.
ATF E-Form 6-Part I (5330.3A)
Revised August 2011
Firearms (Continued)
Name and Address
of Manufacturer
a.
Type
(Frame,
Receiver,
SG, RI, PI,
RE,DD,MG)
b.
Unit
U.S.
Caliber Quantity
Guage (Each type) Cost (U.S. Munitions
or Size
Currency) Import List
Category
c.
d.
e.
f.
Model
Length
of
Barrel
(Inches)
Overall
Length
(Inches)
Serial
No.
New (N)
or
Used (U)
g.
h.
i.
j.
k.
ATF E-Form 6-Part I (5330.3A)
Revised August 2011
Implements of War (Continued)
Name and Address
of Manufacturer
Description
Caliber or
Guage
or Size
Quantity
(Each type)
Unit Cost
(U.S. Currency)
U.S. Munitions Import
List
Category
a.
b.
c.
d.
e.
f.
ATF E-Form 6-Part I (5330.3A)
Revised August 2011
Implements of War (Continued)
Name and Address
of Manufacturer
Description
Caliber or
Guage
or Size
Quantity
(Each type)
Unit Cost
(U.S. Currency)
U.S. Munitions Import
List
Category
a.
b.
c.
d.
e.
f.
ATF E-Form 6-Part I (5330.3A)
Revised August 2011
Implements of War (Continued)
Name and Address
of Manufacturer
Description
Caliber or
Guage
or Size
Quantity
(Each type)
Unit Cost
(U.S. Currency)
U.S. Munitions Import
List
Category
a.
b.
c.
d.
e.
f.
ATF E-Form 6-Part I (5330.3A)
Revised August 2011
Ammunition (Continued)
Name and Address
of Manufacturer
Description
Caliber or
Guage
or Size
Quantity
(Each type)
Unit Cost
(U.S. Currency)
U.S. Munitions Import
List
Category
a.
b.
c.
d.
e.
f.
ATF E-Form 6-Part I (5330.3A)
Revised August 2011
Ammunition (Continued)
Name and Address
of Manufacturer
Description
Caliber or
Guage
or Size
Quantity
(Each type)
Unit Cost
(U.S. Currency)
U.S. Munitions Import
List
Category
a.
b.
c.
d.
e.
f.
ATF E-Form 6-Part I (5330.3A)
Revised August 2011
Ammunition (Continued)
Name and Address
of Manufacturer
Description
Caliber or
Guage
or Size
Quantity
(Each type)
Unit Cost
(U.S. Currency)
U.S. Munitions Import
List
Category
a.
b.
c.
d.
e.
f.
ATF E-Form 6-Part I (5330.3A)
Revised August 2011
Instruction Sheet for ATF Form 6 Part I (5330.3A)
(Submit in triplicate) (Detach this instruction sheet before submitting your application)
Paperwork Reduction Act Notice
This request is in accordance with the Paperwork Reduction Act of 1995. The
purpose of this information collection is to allow ATF to determine if the article(s)
described on the application qualifies for importation by the importer, and to serve as
the authorization for the importer. This information is mandatory (18 U.S.C. 925(d),
26 U.S.C. 5844, 22 U.S.C. 2778).
The estimated average burden associated with this collection of information is 30
minutes per respondent or recordkeeper, depending on individual circumstances.
Comments concerning the accuracy of this burden estimate and suggestions for
reducing this burden should be addressed to Reports Management Officer,
Document Services, Bureau of Alcohol, Tobacco, Firearms and Explosives,
Washington, DC 20226.
An agency may not conduct or sponsor, and a person is not required to respond to,
a collection of information unless it displays a currently valid OMB control number.
Confidentiality is not assured.
General Information
immigrating to the United States. The firearms must accompany the nonresident
U.S. citizen on entry into the United States, since once he is in the United States, and
has acquired residence in a State, he may not directly import a firearm. He must
engage the services of a federally licensed firearms dealer in his State of residence to
import the sporting firearms (excluding NFA and surplus military) for him. A
nonresident alien must bring in their firearms within 90 days of arrival in the United
States, which is when they obtain State residency. If the firearms are to be imported
after 90 days of arrival, he must engage the services of a federally licensed firearms
dealer in his State of residence to import the sporting firearms (excluding NFA and
surplus military) for him.
9. Under Arms Export Control Act of 1976 regulations in 27 CFR 447.41(c), a permit
is not required for the importation of:
a. U.S. Munitions Import List articles from Canada not subject to 27 CFR Part 478
and 479, except articles enumerated in Categories I, II, III, IV, VI(e), VIII(a),
XVI, and XX; and nuclear weapons, strategic delivery systems, and all
specifically designed components, parts, accessories, attachments, and
associated equipment thereof.
b. Minor components and parts of Category I(a) firearms, except barrels, cylinders,
receivers (frames) or complete breech mechanisms, when the total value does
An approved ATF Form 6 - Part I (5330.3A) is required to import firearms,
not exceed $100 wholesale in any single transaction.
ammunition, and implements of war into the United States or any possession
thereof, except for certain exempt importations prescribed in 27 CFR Parts 447,
Preparation
478 and 479. A military member of the U.S. Armed Forces who is on active duty
outside the U.S., or who has been on active duty outside the U.S. during the
60-day period immediately preceding the intended importation, should complete 10. The applicant shall prepare this form in triplicate. Required signatures must be in
ink on all copies. Other entries must be in ink or be typewritten.
ATF Form 6 - Part II (5330.3B) to import sporting type firearms or ammunition
for his personal use.
11. The application should be submitted approximately 60 days prior to the intended
importation. All copies shall be submitted to:
2. Any person engaged in the business of importing firearms or ammunition for
resale must be licensed as an importer under the Gun Control Act of 1968 and, if
Director
he is importing firearms, ammunition, firearms parts or implements of war (other
Bureau of Alcohol, Tobacco, Firearms, and Explosives
than sporting shotguns, shotgun shells, or shotgun parts) he must also be
244 Needy Road
registered as an importer under the Arms Export Control Act of 1976. No permit
Martinsburg, WV 25405
to import such articles for resale will be issued until the importer is properly
Attention: Firearms and Explosives Imports Branch
licensed and registered.
1.
12. Any questions concerning the application should be referred to the Imports Branch
3. A Federal firearms licensee other than an importer, may make an occasional
at the above address or telephone (304) 616-4550.
importation of sporting firearms or ammunition (excluding surplus military) for
himself or an unlicensed person in the licensee's State, provided that the firearms
13. If a licensee is applying to import an article for subsequent transfer to a known final
and ammunition are intended for personal use of the person for whom imported
recipient (e.g., an individual, commercial entity, or government agency), the
and not for resale. ATF Form 6 - Part I (5330.3A) is used to obtain approval for
licensee must complete items 1 through 16, and identify the final recipient by name
such importation.
and address in item 10.
4. A permit is not required for a firearm or ammunition brought into the United
14. Item 9, Certification of Origin: The purpose of this certification is to determine
States or any possession thereof by any person who can establish to the
whether items sought for importation require retransfer authorization from the
satisfaction of U.S. Customs and Border Protection (CBP) that such firearm or
Department of State. Applicants should check block 9a if the articles sought for
ammunition was previously taken out of the United States or any possession
importation were produced for the civilian market and were not associated with the
thereof by such person.
U.S. military. Applicants should check block 9b if the articles sought for
importation contain parts or components produced by or for the U.S. military or
5. A permit is not required for the return of a repaired firearm, or replacement
manufactured with U.S. military technical data or assistance, and the articles were
firearm of the same kind and type, to the person in the United States who sent the
provided by the U.S. government to a foreign government through a grant or
defective firearm out of the United States for repair.
foregin military sales program. Applicants should check block 9c if the articles
sought for importation contain parts or components produced by or for the U.S.
6. If you are a nonimmigrant alien do not complete this form. A nonimmigrant alien
military or manufactured with U.S. military technical data or assistance, and the
entering the U.S. temporarily needs to submit an ATF Form 6NIA (5330.3D)
articles were sold abroad pursuant to an export license issued by the Department of
(Application and Permit for Temporary Importation of Firearms and Ammunition
State authorizing a Direct Commercial Sale (DCS). NOTE: If block 9b is
by Nonimmigrant Aliens) to temporarily import his personally owned firearms.
checked, a written retransfer authorization from the Department of State must be
attached to the application or the applications will be denied. NOTE: If block 9c
7. An unlicensed person may obtain a permit to import sporting type ammunition
is checked, either a copy of the export license authorizing the DCS or a written
(excluding tracer or incendiary) and firearm parts (other than frames, receivers or
retransfer authorization from the Department of State must be attached to the
actions) without engaging the services of a Federal firearms licensee, provided that
application or the application will be denied.
the importation is for his personal use and not for resale.
8. A nonresident U.S. citizen returning to the United States or a nonresident alien
immigrating to the United States, from a permanent residence outside of the
United States may complete and forward the enclosed ATF Form 6 Part I permit
application without having to utilize the services of a federally licensed firearms
dealer. The nonresident should include a statement, either on the application form
or on an attached sheet, that the firearms are being imported for his personal
use and not for resale and that he is a nonresident U.S. citizen returning to the
United States, or is a nonresident alien
Approval
15. The Director will approve the application or advise the applicant of the reason
for the disapproval. In some cases it may be necessary to request additional
(INSTRUCTIONS CONTINUED ON REVERSE)
ATF E-Form 6-Part I (5330.3A)
Revised August 2011
information or to have the firearm or ammunition sent to ATF for examination to
determine the import status.
16. The permit is valid for 12 months from the date of approval. The approved
application will serve as the permit to import the article(s) described on the form.
17. After approval, the Director will retain one copy and forward the original to the
applicant or his designated agent, along with copies of ATF Form 6A, Release
and Receipt of Imported Firearms, Ammunition and Implements of War.
Release From Customs
18. No amendments or alterations may be made to an approved permit, except by the
Director.
19. An approved ATF Form 6 - Part I (5330.3A) which is unused, expired suspended
or revoked shall be returned immediately to the Director, Bureau of ATF, 244
Needy Road Martinsburg, WV 25405
Attention: Firearms and Explosives Imports Branch.
20. The ATF Form 6A, in duplicate with Section I completed, the approved permit,
and any other necessary documents, must be presented to CBP officials handling
the importation to effect release of the articles. For the commercial import (i.e.,
import for resale) of firearms, firearms parts and components, and ammunition,
the importer also must present to CBP, in order to effect release of the articles,
either a corresponding export license issued by the exporting country or a
statement, under penalty of perjury, that the exporting country does not issue
export licenses.
marijuana, or any depressant, stimulant, or narcotic drug, or any other controlled
substance; by one who has been adjudicated mentally defective or has been
committed to a mental institution; by one who has been discharged from the
Armed Forces under dishonorable conditions; by one who has renounced his or
her U.S. citizenship; by one who is an alien illegally in the United States or is a
nonimmigrant alien; by one who is subject to certain restraining orders; or by one
who has been convicted of a misdemeanor crime of domestic violence.
Furthermore, section 922 prohibits the shipment, transportation, or receipt in or
affecting interstate commerce of a firearm by one who is under indictment or
information for a crime punishable by imprisonment for a term exceeding one
year.
Forms
24. Federal firearms licensees must retain this form as part of their ATF required
records permanently as prescribed by 27 CFR 478.129(d). Importers registered
under the Arms Export Control Act who do not also hold a Federal firearms
license must retain this form as part of their ATF required records for at least the
6-year period prescribed by 27 CFR 447.34(b).
Additional Forms are available from:
ATF Distribution Center
1519 Cabin Branch Drive
Landover, MD 20785-3816
Or by accessing the ATF website at http://www.atf.gov
21. The CBP officer, after determining that the importation is in order, will execute
the certificate of release on ATF Form 6A.
22. The CBP officer will forward the ATF Form 6A to the address shown on the
form and return the permit and any additional copies of ATF F 6A, to the
applicant.
Prohibited Persons Under U.S. Law
23. The importer of a firearm should be familiar with provisions of law governing
who may lawfully possess a firearm in the United States. Generally, 18 U.S.C.
922 prohibits the shipment, transportation, receipt, or possession in or affecting
interstate commerce of a firearm by one who has been convicted of a crime
punishable by imprisonment for a term exceeding one year; by one who is a
fugitive from justice; by one who is an unlawful user of, or addicted to,
Privacy Act Information
The following information is provided pursuant to Section 3 of the Privacy Act of 1974 (5 U.S.C. § 552(a)(e)(3)).
1. Authority. Disclosure of the information requested on ATF Form 6 Part I (5330.3A) is mandatory pursuant to 18 U.S.C. 925 and Section 38 of the Arms Export Control
Act of 1976 (22 U.S.C. 2778, 26 U.S.C. 5844) to obtain a permit to import firearms, ammunition, and implements of war.
2. Purpose. To determine if the article(s) qualifies for importation by the applicant.
3. Routine Uses. The information will be used by ATF to make determinations set forth in paragraph 2. In addition, information may be disclosed to other Federal, State,
foreign and local law enforcement and regulatory agency personnel to verify information on the application and to aid in the performance of their duties with respect to the
enforcement and regulation of firearms and/or ammunition where such disclosure is not prohibited by law. The information may further be disclosed to the Justice
Department if it appears that the furnishing of false information may constitute a violation of Federal law. Finally, the information may be disclosed to members of the
public in order to verify the information on the application when such disclosure is not prohibited by law.
4. Effects. Failure to supply complete information will delay processing and may cause denial of the application.
ATF E-Form 6-Part I (5330.3A)
Revised August 2011
| File Type | application/pdf |
| File Modified | 2012-08-30 |
| File Created | 2012-08-30 |