Lightweight Thermal Paper from China and Germany, Inv. No. 701-TA-451 and 731-TA-1126-1127 (Review)

Information collections for import injury investigations (producers, importers, purchasers, and foreign producer questionnaires and institution notices for 5-year reviews)

LWTP (R) - Foreign Instructions

Lightweight Thermal Paper from China and Germany, Inv. No. 701-TA-451 and 731-TA-1126-1127 (Review)

OMB: 3117-0016

Document [pdf]
Download: pdf | pdf
INSTRUCTION BOOKLET

GENERAL INFORMATION, INSTRUCTIONS, AND
DEFINITIONS FOR COMMISSION FOREIGN
PRODUCER/EXPORTER QUESTIONNAIRES

CERTAIN LIGHTWEIGHT THERMAL PAPER
FROM CHINA AND GERMANY
Investigation Nos. 701-TA-451 and 731-TA-1126-1127 (Review)

Further information.--If you have any questions concerning the enclosed
questionnaire(s) or other matters related to this proceeding, you may contact
the following member of the Commission=s staff (Fax 202-205-3205):
Nathanael Comly, investigator (202-205-3174; Email [email protected])
regarding general questions and trade and related information; and
Amelia Preece, economist (202-205-3250; Email [email protected])
regarding market related information.

GENERAL INFORMATION
Background.--On November 24, 2008, the Department of Commerce issued a countervailing duty
order on imports of China (73 F.R. 70958) and an antidumping duty order from China and
Germany (73 F.R. 70959). On October 1, 2013, the Commission instituted reviews pursuant to
section 751(c) of the Tariff Act of 1930 (19 U.S.C. § 1675(c)) (the Act) to determine whether
revocation of the orders would be likely to lead to continuation or recurrence of material injury to
the domestic industry within a reasonably foreseeable time (78 F.R. 60313). If the Commission
makes affirmative determinations, the orders will remain in place. If the Commission makes
negative determinations, the Department of Commerce will revoke the orders.
Questionnaires and other information pertinent to this proceeding are available at
http://www.usitc.gov/trade_remedy/731_ad_701_cvd/investigations/2014/lightweight_thermal_paper/reviewphase.htm .

Please direct questions regarding the questionnaire and correspondence to Nathanael Comly
([email protected], 202-205-3174) at the U.S. International Trade Commission, 500 E
Street, W, Washington, D.C. 20436. Correspondence may be sent to the above address or via FAX
to 202-205-3205.Hearing-impaired individuals can obtain information regarding this proceeding
via the Commission’s TDD terminal (202-205-1810).
Due date of questionnaire(s).--Please submit the completed questionnaire(s) to the United States
International Trade Commission so as to be received by no later than SEPTEMBER 5, 2014.
Because Commission staff might contact you with questions during the course of the proceeding,
save the final version of the document(s) and retain all files and worksheets associated with the
completed questionnaire(s). Please also retain a copy of any paper original document that you
submit.
Service of questionnaire response(s).--In the event that your firm is a party to this proceeding, you
are required to serve a copy of the questionnaire(s), once completed, on parties to the proceeding
that are subject to administrative protective order (see 19 CFR ' 207.7). A list of such parties is
maintained by the Commission=s Secretary and may be obtained by calling 202-205-1803. A
certificate of service must accompany the copy of the completed questionnaire(s) you submit (see
19 CFR ' 207.7).
Confidentiality.--The commercial and financial data furnished in response to the enclosed
questionnaire(s) that reveal the individual operations of your firm will be treated as confidential by
the Commission to the extent that such data are not otherwise available to the public and will not
be disclosed except as may be required by law (see 19 U.S.C. ' 1677f). Such confidential
information will not be published in a manner that will reveal the individual operations of your
firm; however, general characterizations of numerical business proprietary information (such as
discussion of trends) will be treated as confidential business information only at the request of the
submitter for good cause shown.

2

GENERAL INFORMATION--Continued
Verification.--The information submitted in the enclosed questionnaire(s) is subject to audit
and verification by the Commission. To facilitate possible verification of data, please keep
all your files, worksheets, and supporting documents used in the preparation of the
questionnaire response(s).
Release of information.--The information provided by your firm in response to the
questionnaire(s), as well as any other business proprietary information submitted by your firm to
the Commission in connection with the proceeding, may become subject to, and released under,
the administrative protective order provisions of the Tariff Act of 1930 (19 U.S.C. '1677f) and
section 207.7 of the Commission=s Rules of Practice and Procedure (19 CFR '207.7). This means
that certain lawyers and other authorized individuals may temporarily be given access to the
information for use in connection with this proceeding or other import-injury proceedings
conducted by the Commission on the same or similar merchandise; those individuals would be
subject to severe penalties if the information were divulged to unauthorized individuals.
INSTRUCTIONS
Answer all questions.-- Do not leave any question or section blank unless a questionnaire
expressly directs you to skip over certain questions or sections. If the answer to any question is zero
or “none”, enter the number zero or “none”. If information is not readily available from your
records in exactly the form requested, furnish carefully prepared estimates. Answers to
questions and any necessary comments or explanations should be entered in the space provided or
in a separate MS Word document submitted along with the questionnaire(s). If your firm is
completing more than one questionnaire in connection with this proceeding (i.e., a producer,
importer, purchaser, and/or foreign producer questionnaire), you need not respond to duplicated
questions in the questionnaires.
Consolidate all establishments in China or Germany.--Report the requested data for your
establishment(s) located in China or Germany. Firms operating more than one establishment
should combine the data for all establishments into a single report.
Electronic completion.-- Please electronically enter your responses into the Commission
provided MS Word document. The MS Word versions of all the questionnaires in this
proceeding are available online at the ITC web page or may be obtained directly from the
Commission’s Investigator, Nathanael Comly ([email protected], 202-205-3174).
Electronic submission.-- Responding firms should submit their questionnaire responses
electronically in MS Word format. The submission of questionnaire responses in the MS Word
format allows the Commission to electronically extract data from questionnaires and thus, compile,
assess, and analyze submitted data more efficiently and promptly. Furthermore, the electronic
submission of questionnaires completed in MS Word facilitates the Commission’s ability to
produce documents that comply with Section 508 of the Rehabilitation Act of 1973. There are
three electronic submissions options detailed below.
3

INSTRUCTIONS--Continued
OPTIONS FOR FILING
This questionnaire is available as a “fillable” form in MS Word format on the
Commission’s website at:
http://www.usitc.gov/trade_remedy/731_ad_701_cvd/investigations/2014/lightweight_thermal_paper/reviewphase.htm .

Please do not attempt to modify the format or permissions of the questionnaire
document. complete the questionnaire and submit it electronically using one of the
methods noted below. If your firm is unable to complete the MS Word
questionnaire or cannot use one of the electronic methods of submission, please
contact the Commission for further instructions.
• Upload via Secure Drop Box.—Upload the completed questionnaire in MS Word format along
with a scanned copy of the signed certification page (page 1) through the Commission’s secure
upload facility:
Web address: https://dropbox.usitc.gov/oinv/

Pin: LWTP

• E-mail.—E-mail your questionnaire to the investigator identified on page 1 of the Instruction
Booklet; include a scanned copy of the signed certification page (page 1). Type the following in
the e-mail subject line: BPI Questionnaire, INV. NO. 451. Please note that submitting your
questionnaire by e-mail may subject your firm’s business proprietary information to transmission
over an unsecure environment and to possible disclosure. If you choose this option, the
Commission warns you that any risk involving possible disclosure of such information is assumed
by the submitter and not by the Commission.
• Compact disc (CD).—Copy your MS Word questionnaire onto a CD. Also, please include a
signed certification page (page 1) and mail to the U.S. International Trade Commission, 500 E
Street SW, Washington, DC 20024. It is strongly recommended that you use an overnight mail
service. U.S. mail sent to government offices undergoes additional processing which not only
results in substantial delays in delivery but may also damage CDs.
Note: If you are a party to the proceeding, and service of the questionnaire is required, such service
should be made in paper form.

4

DEFINITIONS
Certain lightweight thermal paper.( “certain LW thermal paper”)-- thermal paper with a basis
weight of 70 grams per square meter (g/m) (with a tolerance of± 4.0 g/m2) or less; irrespective of
dimensions; 1 with or without a base coat 2 on one or both sides; with thermal active coating(s) 3 on
one or both sides that is a mixture of the dye and the developer that react and form an image when
heat is applied; with or without a top coat; 4 and without an adhesive backing. Certain LW thermal
paper is typically (but not exclusively) used in point-of-sale applications such as ATM receipts,
credit card receipts, gas pump receipts, and retail store receipts.
The merchandise subject to this order is covered in the Harmonized Tariff Schedule of the
United States (HTS) by subheading 4820.10.20 and statistical reporting numbers 3703.10.6000,
4811.59.2000, 4811.90.8000, 4811.90.8030, 4811.90.8040, 4811.90.8050, 4811.90.9000,
4811.90.9030, 4811.90.9035, 4811.90.9050, 4811.90.9080, 4811.90.9090, and 4823.40.0000.
Jumbo roll.—A roll of certain LW thermal paper that measures over 12 inches in width.
Slit roll.—A roll of certain LW thermal paper that measures less than 12 inches in width.
Coaters.–Firms that conduct blending and coating operations on uncoated paper (whether
internally produced or purchased) in the production of jumbo rolls of certain lightweight thermal
paper. Coaters may or may not conduct slitting and packaging operations in the United States. For
purposes of these investigations, those firms that conduct slitting and packaging operations in the
United States on jumbo rolls purchased or imported are considered U.S. converters.
Converters.–Firms that conduct slitting and packaging operations on jumbo rolls which they
purchase or import.
Firm.--An individual proprietorship, partnership, joint venture, association, corporation
(including any subsidiary corporation), business trust, cooperative, trustee in bankruptcy, or
receiver under decree of any court.
Related firm.--A firm that your firm solely or jointly owned, managed, or otherwise controlled; a
firm that solely or jointly owned, managed, or otherwise controlled your firm; and/or a firm that
was solely or jointly owned, managed, or otherwise controlled by a firm that also solely or jointly
owned, managed, or otherwise controlled your firm.
1

Certain LW thermal paper is typically produced in jumbo rolls that are slit to the specifications of the converting
equipment and then converted into finished slit rolls. Both jumbo and converted rolls (as well as certain LW thermal
paper in any other form, presentation, or dimension) are covered by the scope of the order.
2
A base coat, when applied, is typically made of clay and/or latex and like materials and is intended to cover the rough
surface of the paper substrate and to provide insulating value.
3
A thermal active coating is typically made of sensitizer, dye, and co-reactant.
4
A top coat, when applied, is typically made of polyvinyl acetone, polyvinyl alcohol, and/or like materials and is
intended to provide environmental protection, an improved surface for press printing, and/or wear protection for the
thermal print head.

5

DEFINITIONS--Continued
Establishment.--Each facility of a firm in China or Germany involved in the production of certain
LW thermal paper (as defined above), including auxiliary facilities operated in conjunction with
(whether or not physically separate from) such facilities.
United States.--For purposes of this review, the 50 States, Puerto Rico, the U.S. Virgin Islands,
and the District of Columbia.
Importer.--Any person or firm engaged, either directly or through a parent company or subsidiary,
in importing certain LW thermal paper (as defined above) into the United States from a foreign
manufacturer or through its selling agent.
Average production capacity.--The level of production that your establishment(s) could
reasonably have expected to attain during the specified periods. Assume normal operating
conditions (i.e., using equipment and machinery in place and ready to operate; normal operating
levels (hours per week/weeks per year) and time for downtime, maintenance, repair, and cleanup;
and a typical or representative product mix).
Production.--All production in your establishment(s) in China or Germany, including production
consumed internally within your firm.
Shipments.--Shipments of products produced in your establishment(s) in China or Germany.
Shipment quantities.—Quantities reported should be net of returns.
Shipment values.—Values reported should be net values (i.e., gross sales values less all
discounts, allowances, rebates, prepaid freight, and the value of returned goods) in U.S.
dollars, f.o.b. your point of shipment in China or Germany.
Home market commercial shipments.--Shipments, other than internal consumption and
transfers to related firms, within China or Germany.
Home market internal consumption/transfers to related firms.--Shipments made to
related firms in China or Germany, including product consumed internally by your firm.
Export shipments.--Shipments to destinations outside China or Germany, including
shipments to related firms.
Inventories.--Finished goods inventory, not raw materials or work-in-progress.

6


File Typeapplication/pdf
File TitleForeign instructions - sunset
AuthorUSITC
File Modified2014-08-01
File Created2014-08-01

© 2024 OMB.report | Privacy Policy