Form 8700-23 RCRA Hazardous Waste Part A Permit Application Instructi
2015 Hazardous Waste Report, Notification of Regulated Waste Activity, and Part A Hazardous Waste Permit Application and Modification (Renewal)
0976.17 Form 8700-23 Rev
RCRA Hazardous Waste Part A Permit Application (State Agencies)
OMB: 2050-0024
United States
Environmental Protection
Agency
January 2015
RCRA Hazardous Waste Part A Permit Application
Instructions and Form
EPA Form 8700-23
(OMB #2050-0024; Expires mm/dd/yyyy)
Office of Resource Conservation and Recovery (ORCR)
(5303P)
Washington, DC 20460
RCRA Hazardous Waste Part A Permit Application
Instructions and Form
The Resource Conservation and Recovery Act (RCRA) Section 3005 requires the U.S. Environmental Protection Agency (EPA) to establish permitting requirements applicable to hazardous waste treatment, storage, or disposal facilities (TSDFs). The owner and operator of a TSDF must obtain a permit as required under 40 CFR Part 270. Respondents must submit the information required in the RCRA Hazardous Waste Part A Permit Application [EPA Form 8700-23] (Part A Permit Application) for a first permit application or for a revised permit application. Owners and operators of four types of TSDFs are subject to the requirements: new facilities not yet constructed; newly regulated existing facilities subject to RCRA permitting requirements for the first time; permitted facilities with newly regulated units; and interim status facilities. The EPA needs information contained in the application to identify the person(s) legally responsible for hazardous waste activity, to determine which facilities require permits under more than one program, to assess potential for the facility to pollute nearby ground and surface waters, to identify the timeframe available for the EPA to process permit applications, and to determine the specific wastes a facility is legally allowed to handle for different purposes. The EPA must ensure that hazardous wastes are managed in a way that protects human health and the environment as required by RCRA. This is mandatory reporting by the respondents.
The EPA enters Part A Permit Application information submitted by respondents into RCRAInfo, the EPA national database, and issues permits. The EPA uses this information to identify the universe of regulated waste TSDFs and their specific regulated hazardous waste activities. The EPA also uses the information for tracking and planning and for a variety of enforcement and inspection purposes. Finally, the EPA uses this information to ensure that: hazardous wastes are managed properly; TSDFs are operated and maintained as required; statutory provisions are upheld; and that regulations are adhered to by facility owners and operators.
Section 3007(b) of RCRA and 40 CFR Part 2, Subpart B, which defines the EPA’s general policy on public disclosure of information, both contain provisions for confidentiality. However, the Agency does not anticipate that businesses will assert a claim of confidentiality covering all or part of the Part A Permit Application. If such a claim were asserted, the EPA must and will treat the information in accordance with the regulations cited above. The EPA also will assure that the information collection complies with the Privacy Act of 1974 and OMB Circular 108.
Estimated Burden: The annual public reporting and recordkeeping burden for the Part A Permit Application is estimated to average 25 hours per response for an initial application and 13 hours per response for a revised application.
To comment on the EPA’s need for this information, the accuracy of the provided burden estimates, and any suggested methods for minimizing respondent burden, including the use of automated collection techniques, the EPA has established a public docket for the Information Collection Request (ICR) under Docket ID Number EPA-HQ-RCRA-2014-0296, which is available for online viewing at www.regulations.gov, or in person viewing at the RCRA Docket in the EPA Docket Center (EPA/DC), EPA West, Room B102, 1301 Constitution Avenue, NW, Washington, D.C. The EPA Docket Center Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number for the Reading Room is (202) 566-1744, and the telephone number for the RCRA Docket is (202) 566-0270. An electronic version of the public docket is available at www.regulations.gov. This site can be used to submit or view public comments, access the index listing of the contents of the public docket, and to access those documents in the public docket that are available electronically. When in the system, select “search;” then key in the Docket ID Number identified above. Also, you can send comments to the Office of Information and Regulatory Affairs, Office of Management and Budget, 725 17th Street, NW, Washington, D.C. 20503, Attention: Desk Officer for the EPA. Please include the EPA Docket ID Number EPA-HQ-RCRA-2014-0296 and OMB Control Number 2050-0024 in any correspondence. |
Table of Contents
(Note: This table of contents contains links (hyperlinks). To go
to a particular section of the document,
move the cursor to the
desired page number and left click on the computer mouse.)
The RCRA Hazardous Waste Part A Permit Application 1
Determining if You Must File 6
Who Must File a RCRA Hazardous Waste Permit Application? 6
How Do I Know if I Handle a Regulated Hazardous Waste? 6
How To File A RCRA Hazardous Waste Permit Application 8
How Many Permit Applications Should I File? 8
Can I Request that this Information be Kept Confidential? 8
Where Should I Send My Completed Permit Application? 9
When Should I File My Permit Application? 9
When Should My Permit Application be Revised? 10
Facilities Operating Under Interim Status 10
Facilities Operating Under a RCRA Hazardous Waste Permit 11
Instructions for Filling Out the RCRA Subtitle C Site Identification (Site ID) Form 12
Item 1 – Reason for Submittal 13
Item 2 – Site EPA ID Number 15
Item 3 and 4 – Site Name and Location 15
Item 6 – North American Industry Classification System (NAICS) Code(s) 16
Item 7 – Site Mailing Address 16
Item 8 – Site Contact Person 17
Item 9 – Legal Owner and Operator of the Site 17
Item 10 – Type of Regulated Waste Activity 19
Item 11 – Description of Hazardous Wastes 27
Item 12 – Notification of Hazardous Secondary Material (HSM) Activity 28
Addendum to the Site Identification Form: Notification of Hazardous Secondary Material Activity 29
You Must Fill Out this Section if: 29
Item 1 – Indicate Reason for Notification (include dates where requested) 30
Item 2 – Description of Excluded Hazardous Secondary Material (HSM) Activity 31
Item 3 – Facility has Financial Assurance Pursuant to 40 CFR 261.4(a)(24)(vi) 34
Instructions for Filling Out the Hazardous Waste Permit information Form 35
Item 1 – Facility Permit Contact 35
Item 2 – Facility Permit Contact Mailing Address 35
Item 3 – Operator Mailing Address and Telephone Number 35
Item 4 – Facility Existence Date 36
Item 5 – Other Environmental Permits 36
Item 6 – Nature of Business 37
Item 7 – Process Codes and Design Capacities 37
Item 9 – Description of Hazardous Wastes 37
Other Reference Information and Code Lists 41
This page intentionally left blank
The RCRA Hazardous Waste Part A Permit Application
Introduction
The Resource Conservation and Recovery Act (RCRA) requires anyone who owns or operates a facility where hazardous waste is treated, stored, or disposed to have a RCRA hazardous waste permit issued by the U.S. Environmental Protection Agency (EPA). This booklet is designed to help you determine if you are subject to RCRA hazardous waste permitting requirements. The instructions contained in this booklet will assist you in starting the permitting process by completing and submitting a RCRA Hazardous Waste Part A Permit Application [EPA Form 8700-23] (Part A Permit Application) or in modifying your hazardous waste permit by submitting a revised application.
There are two parts to a RCRA Hazardous Waste Permit Application – Part A and Part B. Part A of the RCRA Hazardous Waste Permit Application consists of EPA Form 8700-23 (includes both the RCRA Subtitle C Site Identification Form and the Hazardous Waste Permit Information Form), along with maps, drawings, and photographs, as required by 40 CFR 270.13. Part B of the RCRA hazardous waste permit application contains detailed, site-specific information. There is no form for the Part B Permit Application; rather, the Part B Permit Application must be submitted in narrative form and contain the information described in applicable sections of 40 CFR 270.14 through 270.27.
NOTE
|
Although this booklet contains information and instructions for completing a Part A Permit Application, it should not be considered a substitute for the regulations in Title 40 of the Code of Federal Regulations (40 CFR). Rather, this booklet serves as a supplement to the regulations and provides additional information not contained in 40 CFR. As an owner or operator of a hazardous waste treatment, storage, or disposal facility, you are responsible for learning and complying with all the requirements that apply to you and the operations at your facility.
In addition, remember that this booklet and the regulations in 40 CFR address only the Federal hazardous waste program. Many States may have hazardous waste permitting requirements that differ from the Federal requirements; those States may use EPA Form 8700-23 for the Part A Permit Application submission or they may use a similar State form that requires information not requested in the EPA form. Again, it is your responsibility to make sure that you have completed and submitted all forms required under the Federal or your State program. |
(Go to Table
of Contents)
What’s New
Below are a list of changes to the RCRA Hazardous Waste Part A Permit Application Instructions and Forms.
claRIFIED THE DEFINITION OF large QUANTITY GENERATOR (LQG)
Although current RCRA regulations do not specifically define the term “large quantity generator” (LQG), they do define the terms “conditionally exempt small quantity generator” (CESQG) and “small quantity generator “(SQG). Thus, a LQG is a generator that is not a CESQG or SQG. For purposes of clarity, the definition of LQG has been revised to describe all those situations where a generator would be a LQG.
CLARIFIED THE DEFINITION OF SMALL QUANTITY GENERATOR (SQG)
A SQG is defined at 40 CFR 260.10 as a site that generates less than 1,000 kilograms (kg; 2,200 pounds [lbs]) of hazardous waste in a calendar month. However, there are other situations where a generator could generate small amounts of acute hazardous waste listed in sections 261.31 or 261.33(e); and any residues or contaminated soil, waste, or other debris resulting from the cleanup of a spill, into or on any land or water, of any acute hazardous wastes listed in sections 261.31 or 261.33(e) and still maintain its regulatory status as a SQG. Therefore, for purposes of clarity, the definition of SQG has been revised to describe all those situations where a generator would continue to be a SQG. The EPA plans to make the appropriate conforming change to the outdated definition of SQG at 40 CFR 260.10 in the future.
Clarified the definition of conditionally exempt small quantity generator (CESQG)
A CESQG is defined at 40 CFR 261.5(a) as a site that generates less than or equal to 100 kg (220 lbs) of hazardous waste in a calendar month. However, as found in 40 CFR 261.5(e), a generator also may generate small amounts of acute hazardous waste listed in sections 261.31 or 261.33(e); and any residues or contaminated soil, waste, or other debris resulting from the cleanup of a spill, into or on any land or water, of any acute hazardous wastes listed in sections 261.31, or 261.33(e) and still maintain its regulatory status as a CESQG. Therefore, for purposes of clarity, the definition of CESQG has been revised to describe all those situations where a generator would continue to be a CESQG.
Where to Get Help
We realize that the regulations are complex. Although we are not providing reprints of the 40 CFR regulations in this booklet, copies of the Federal regulations are available from the EPA (see below). A list of State and EPA Regional Office addresses, contact names, telephone numbers, and e-mail addresses are located at: http://www.epa.gov/osw/inforesources/data/form8700/contact.pdf.
(Go to Table
of Contents)
RCRA Frequently Asked Questions
This allows users to find answers to commonly asked questions that cover a wide range of RCRA issues and topics. Find at: http://waste.supportportal.com/ics/support/default.asp?deptID=23023.
RCRA Online
The RCRA Online database is designed to enable users to locate documents, including publications and other outreach materials that cover a wide range of RCRA issues and topics. Find at: http://www.epa.gov/rcraonline.
RCRA Regulations
The Federal regulations can be found at: http://www.gpo.gov/fdsys/.
Compliance Assistance Centers
The EPA has sponsored partnerships with industry, academic institutions, environmental groups, and other agencies to launch sector-specific Compliance Assistance Centers (Centers). Each Center addresses real world issues in understandable language for you to understand Federal environmental requirements and how to save money through pollution prevention techniques. Visit the Compliance Assistance Centers at: http://www.assistancecenters.net.
EPA National Compliance Assistance Clearinghouse
The Compliance Assistance Clearinghouse is a comprehensive source of compliance assistance information and resources. Use links to Federal, State, local, and other compliance assistance providers to find the tools you need. Visit the Compliance Assistance Clearinghouse at: http://www.epa.gov/compliance/assistance/index.html.
EPA Small Business Ombudsman Office
1-800-368-5888.
Your Trade Association
Existing Facilities
(Go to Table
of Contents)
You must submit a Part A Permit Application completing all forms included in this booklet. If you do not file a Notification of RCRA Subtitle C Activity and complete the Part A Permit Application by the deadlines specified in the “WHEN SHOULD I FILE MY PERMIT APPLICATION?” section of these instructions, you will be required by law to halt your operations until a RCRA hazardous waste permit is issued.
Facility owners or operators with interim status are treated as having been issued a permit until the EPA reviews the Part B Permit Application and issues a RCRA hazardous waste permit. You may submit your Part B Permit Application voluntarily; however, you are not required to submit it until it is requested by the EPA. You will then have up to six months to submit the Part B Permit Application.
New Facilities
New hazardous waste management facilities are those hazardous waste TSDFs which were not in operation or for which construction had not commenced on or before November 19, 1980. Owners or operators of new hazardous waste management facilities must submit both Parts A and B of the RCRA Hazardous Waste Permit Application at least 180 days before physical construction of the facility is expected to commence. In addition, these owners or operators are not allowed to begin physical construction of the new facility or to treat, store, or dispose of hazardous wastes until receiving a RCRA hazardous waste permit. As such, new facilities do not receive interim status. In addition, new facilities are those facilities that are newly subject to the requirement to obtain a RCRA hazardous waste permit (e.g., through the EPA’s promulgation of a new hazardous waste listing). An application for a permit may be submitted any time after promulgation of those standards in 40 CFR subjecting the facility to hazardous waste permitting requirements.
Most State governments are authorized by the EPA to administer hazardous waste management programs in lieu of the Federal RCRA program. You should contact your State hazardous waste management agency to determine any additional State requirements. You will need to comply with the specific permit application requirements of that State.
The following instructions provide specific information for completing and submitting a Part A Permit Application using the forms included in this booklet. The instructions also provide general information for completing a Part B Permit Application. If, after reading the instructions, you have any questions regarding the RCRA hazardous waste permit application process, contact your State Representative who can answer your questions and help you understand the Federal and State requirements that apply to you. A list of State contacts is available at: http://www.epa.gov/osw/inforesources/data/form8700/contact.pdf.
First Part A Submission
(Go to Table
of Contents)
Revised Part A Submission
There are several conditions under which a facility that has previously submitted a Part A Permit Application must revise that first submission to reflect changes that have occurred at the facility. Both facilities operating under interim status and facilities operating under a RCRA hazardous waste permit may find it necessary to revise their Part A Permit Application. You should mark the box in Item 1 of the Site ID Form to indicate as a component of a revised RCRA Hazardous Waste Part A Permit Application.
If the owner or operator of this facility has changed since the facility last submitted the Part A Permit Application, be sure to submit a Revised Part A Permit Application. The conditions requiring submission of a Revised Part A Permit Application are summarized in the “HOW TO FILE A RCRA HAZARDOUS WASTE PERMIT APPLICATION” section of this booklet. There is also item-by-item instructions for completing both the Site ID Form and the Hazardous Waste Permit Information Form contained in this booklet.
(Go to Table
of Contents)
Determining if You Must File
Who Must File a RCRA Hazardous Waste Permit Application?
The Resource Conservation and Recovery Act of 1976 (RCRA), as amended, requires each person owning or operating a facility for the treatment, storage, or disposal of regulated hazardous waste to have a RCRA hazardous waste permit. This includes individuals, trusts, firms, joint stock companies, Federal agencies, corporations (including government corporations), partnerships, associations, States, municipalities, commissions, interstate bodies, other political subdivisions of a State, or Indian tribes (or an authorized Indian tribe organization). If you treat, store, or dispose of regulated hazardous waste without obtaining a permit, you may be subject to a civil or criminal penalty.
Both new and existing facilities that treat, store, or dispose of regulated hazardous waste are required to submit a RCRA Hazardous Waste Part A Permit Application [EPA Form 8700-23] (Part A Permit Application) as described in 40 CFR Part 270. Four types of facilities are required to submit the Part A Permit Application: new facilities not yet constructed; newly regulated existing facilities subject to RCRA permitting requirements for the first time; permitted facilities with newly regulated units; and interim status facilities.
In an instance where the State may have a newly regulated unit, a Part A Permit Application is required. Adding new units for treating, storing, and disposing of waste creates a change to the facility (be it an existing facility or interim status facility) which would require a Revised Part A Permit Application, as does a major permit modification.
Contact your State if you have questions about the applicability of the Part A Permit Application form to your facility. A list of Part A Permit Application contacts can be found at: http://www.epa.gov/osw/inforesources/data/form8700/contact.pdf.
How Do I Know if I Handle a Regulated Hazardous Waste?
Off-site Facilities
Owners or operators of off-site facilities that treat, store, or dispose of solid wastes, as defined by 40 CFR 261.2, are encouraged to obtain information on the solid wastes they receive from generators. If the generators will not supply this information, you are still responsible for determining if the solid wastes you handle are also hazardous wastes that are regulated by RCRA. To do so, you should follow the procedures for on-site facilities that are described below.
On-site Facilities
(Go to Table
of Contents)
First, you need to determine if the solid waste handled is excluded from regulation under RCRA. The list of exclusions can be found in the regulation entitled “Identification and Listing of Hazardous Waste,” 40 CFR 261.4. If the solid wastes handled are excluded, a RCRA hazardous waste permit is not needed to treat, store, or dispose of these solid wastes. If the solid waste handled is not excluded by 40 CFR 261.4, you need to determine if the solid waste handled is a hazardous waste that is regulated under RCRA. As described below, the EPA regulates a solid waste as a hazardous waste by specifically listing it as a hazardous waste or by assigning it a generic hazardous waste code because it possesses any of the four hazardous waste characteristics.
If the solid waste handled is not excluded by 40 CFR 261.4, you need to determine if it is a hazardous waste that is listed in 40 CFR Part 261, Subpart D, “Lists of Hazardous Wastes.” If you own or operate a facility where listed hazardous waste is treated, stored, or disposed, you are subject to regulation and must file a RCRA Hazardous Waste Permit Application, unless the hazardous waste has been exempted as described below.
If the solid waste handled is not listed in 40 CFR Part 261, Subpart D, the solid waste may still be a hazardous waste if it possesses certain characteristics or contains certain contaminants. These characteristics and contaminants are described in 40 CFR Part 261, Subpart C, “Characteristics of Hazardous Waste.” A determination that a solid waste possesses these characteristics or contaminants may be made based on either:
Your knowledge of the hazard characteristic of the solid waste in light of the materials or processes used; or
The results of testing the solid waste according to the methods in 40 CFR Part 261, Subpart C.
If you own or operate a facility where characteristic hazardous waste is treated, stored, or disposed, you are subject to regulation and must file a RCRA Hazardous Waste Permit Application, unless the hazardous waste has been exempted as described below.
If the hazardous waste that you handle has been exempted under 40 CFR 261.5 or 40 CFR 261.6(a)(3), you are not subject to regulation and do not need to file a RCRA Hazardous Waste Permit Application.
In addition, certain other persons who handle hazardous waste are not required to obtain a RCRA hazardous waste permit. They are:
Generators who accumulate their own hazardous waste on-site for less than 90 days as provided in 40 CFR 262.34;
Farmers who dispose of hazardous waste pesticides from their own use as provided in 40 CFR 262.70; and
(Go to Table of Contents)
Owners and operators of totally enclosed treatment facilities as defined in 40 CFR 260.10.
How To File A RCRA Hazardous Waste Permit Application
As noted above, there are two parts to the RCRA Hazardous Waste Permit Application – Part A and Part B. As required by 40 CFR 270.13, the Part A Permit Application defines the processes to be used for treatment, storage, and disposal of hazardous wastes; the design capacity of such processes; and the specific hazardous wastes to be handled at a facility. The RCRA Hazardous Waste Part A Permit Application [EPA Form 8700-23] (Part A Permit Application) is submitted by completing the two forms included in this booklet: the RCRA Subtitle C Site Identification Form (Site ID Form) and the Hazardous Waste Permit Information Form.
The Part A Permit Application serves as a vehicle through which an owner or operator may submit facility-specific information to the regulatory authority and keep this information current. As specified by 40 CFR 270.14 through 270.27, the Part B Permit Application requires detailed site-specific information such as geologic, hydrologic, and engineering data. The Part B Permit Application is submitted in narrative form.
How Many Permit Applications Should I File?
You need submit only one RCRA Hazardous Waste Permit Application (Part A and Part B) per facility, provided that you describe all of the activities at that facility. If you conduct hazardous waste activity(ies) at more than one facility, you must submit a separate RCRA Hazardous Waste Permit Application (Part A and Part B) for each facility location. You also must have an EPA Identification Number for each of the facilities.
NOTE
|
Only one RCRA Hazardous Waste Permit Application is required per facility. At some point, you may be required to submit revised applications to update your first Part A Permit Application submission. At any given time, the first submission and any subsequent revised submissions represent the Part A Permit Application for your facility.
|
Can I Request that this Information be Kept Confidential?
(Go to Table
of Contents)
Which sections of the Part A Permit Application form contain the information you claim is entitled to confidential treatment?
For how long is confidential treatment desired for the information?
What measures have you taken to guard against undesired disclosure of the information to others?
To what extent has the information been disclosed to others, and what precautions have been taken in connection with that disclosure?
Has the EPA or any other Federal agency made a pertinent confidentiality determination? If so, include a copy of such determination or reference to it, if available.
Will disclosure of the information be likely to result in substantial harmful effects on your competitive position? If so, what would those harmful effects be and why should they be viewed as substantial? Explain the causal relationship between disclosure and the harmful effects.
Information covered by confidentiality claim and the above substantiation will be disclosed by the EPA only to the extent and by means of the procedures set forth in 40 CFR Part 2 and 40 CFR 270.12.
If no claim of confidentiality or no substantiation accompanies the information when it is submitted, the EPA may make the information available to the public without further notice to the submitter.
Where Should I Send My Completed Permit Application?
You should submit the RCRA Hazardous Waste Permit Application to your State or EPA Regional contact. A list of State Contacts can be found at: http://www.epa.gov/osw/inforesources/data/form8700/contact.pdf.
Many States use the form included at the end of this booklet; some also require additional information. Other States require that you complete and submit a State-specific form. The Contact list indicates which form to use. Even if you use the included form, you should check with your State to determine if you need to submit additional information. Also, contact your State if you have any questions about your submission.
When Should I File My Permit Application?
As required by 40 CFR 270.10, the deadlines for filing RCRA Hazardous Waste Permit Applications are:
Existing Facilities
Under 40 CFR 270.10(e), existing facilities must submit a Part A Permit Application no later than six months following the publication of regulations that subject the facility to the requirement to have a RCRA hazardous waste permit.
(Go to Table
of Contents)
New Facilities
Under 40 CFR 270.10(f), new facilities must submit both Part A and Part B Permit Applications at least 180 days before commencing physical construction of the facility. A permit must be received before construction begins.
When Should My Permit Application be Revised?
Facilities Operating Under Interim Status
In accordance with 40 CFR 270.72(a), the owner or operator of a facility operating under interim status must submit a Revised Part A Permit Application at the following times:
Prior to treating, storing, or disposing of new hazardous wastes not previously identified in the facility’s Part A Permit Application. Similarly, when the EPA (or a State with an authorized RCRA program) promulgates a rule listing or identifying new hazardous wastes, facilities managing these wastes must revise their Part A Permit Application to reflect this activity.
Prior to increasing the design capacity of the processes used at the facility. The EPA Regional Administrator (or the State Director, for an authorized State) must approve changes in capacity before they take effect at the facility.
Prior to changing existing processes or adding new processes for treating, storing, and disposing of hazardous wastes at the facility. Changes in treatment, storage, and disposal practices must be approved by the Regional Administrator (or State Director) before they are implemented by a facility.
Prior to undergoing a change in ownership or operational control of a facility.
Whenever facility changes occur in accordance with an interim status corrective action order issued by the EPA, an authorized State, or by a court in a judicial action brought by the EPA or the State.
When a facility adds units for the treatment, storage, and disposal of hazardous waste that are newly regulated by the EPA or a State. A Revised Part A Permit Application must be submitted on or before the date on which the unit becomes subject to the new requirements.
Changes in the quantity of hazardous waste currently specified in the first Part A Permit Application can be made without submitting a Revised Part A Permit Application, provided the quantity does not exceed the design capacities of the processes specified in the first Part A Permit Application or a subsequent Part A Permit Application.
(Go to Table
of Contents)
Facilities Operating Under a RCRA Hazardous Waste Permit
Owners or operators of facilities operating under a RCRA Hazardous Waste Permit may modify their permit at any time, in accordance with the specific requirements in 40 CFR 270.42. Appendix I to 40 CFR 270.42 divides the various types of permit modifications into Classes 1, 2, and 3, based on the complexity of facility changes necessitating a permit modification. Class 1 modifications are minor changes that keep the permit current with changes that occur to the facility or its operation. Class 2 and 3 modifications involve more significant changes in facility operations.
In all cases when a facility owner or operator requests a permit modification, however, he or she must submit the information required in the Part A Permit Application (in 40 CFR 270.13) as part of the modification submittal.
Finally, under 40 CFR 270.10(h), facilities with a RCRA Hazardous Waste Permit must submit a new application (Part A and Part B) at least 180 days prior to the expiration date of the permit.
(Go to Table
of Contents)
Instructions for Filling Out the
RCRA Subtitle C Site
Identification (Site ID) Form
Who Must Submit this Form
All sites required to submit any of the following must submit the RCRA Subtitle C Site Identification Form (Site ID Form):
Initial Notification of Regulated Waste Activity;
Subsequent Notification of Regulated Waste Activity;
First RCRA Hazardous Waste Part A Permit Application;
Revised RCRA Hazardous Waste Part A Permit Application;
Hazardous Waste Report;
Notification for eligible academic entities opting into or withdrawing from managing laboratory hazardous wastes pursuant to 40 CFR Part 262 Subpart K (if in an eligible State); and
Notification for facilities managing hazardous secondary material pursuant to 40 CFR 260.42 (if in an eligible State).
Some States have requirements in addition to, or that are different from the Federal requirements. To obtain the appropriate forms or ask questions, refer to a list of contacts at: http://www.epa.gov/epawaste/inforesources/data/form8700/contact.pdf.
The list will tell you whether the Federal form or a State form is used, who to contact, and where to mail the completed form.
Purpose of this Form
The Site ID Form provides site-specific information about your facility and is used to obtain an EPA Identification Number. The Site ID Form also provides updated information for items that have changed at your site and verifies the information for those items that remain unchanged.
How to Fill Out this Form
Complete the following Site ID Form items, as applicable to your facility:
Item 1 - your reason for submitting the form
Item 2 - your site’s EPA Identification Number
Item 3 - the name of your site
Item 4 - the physical location of your site
(Go to Table of Contents)
Item 5 - the land type of your site
Item 6 - the North American Industry Classification System (NAICS) code(s) for your site
Item 7 - the mailing address for your site
Item 8 - name, title, address, phone number, fax, and e-mail of a contact person at your site
Item 9 - name, address, and phone number of the legal owner(s) and name of the operator(s) of your site
Item 10 - your site’s regulated waste activities (enter all that apply)
Item 11 - the description of hazardous waste
Item 12 - your site’s hazardous secondary material activity, if you manage any
Item 13 - additional comments on Items 1 – 12
Item 14 - certification that the information you provided throughout the form is truthful, accurate, and complete
Addendum to the Site Identification Form – notification of hazardous secondary material activity
Type or print, in blank ink, all items except the Signature box in Item 14. In Item 14, provide the required ink signatures. Signatures must be original. Stamped or photocopied signatures are not acceptable. Enter your site’s EPA Identification Number in the top left-hand corner on all pages of the form; for an Initial Notification for this site, leave the EPA identification Number blank. Use Item 13 – Comments to clarify or provide additional information for any entry. When entering information in the comments section, enter the item number and box letter to which the comment refers. If you must use additional sheets for comments, enter your site’s EPA Identification Number in the top left-hand corner of each sheet.
Item-By-Item Instructions
Item 1 – Reason for Submittal
Place an “X” in the appropriate box(es) to indicate whether this form is your Initial Notification (i.e., this is your first time submitting site identification information / to obtain an EPA Identification Number for this location); a Subsequent Notification (to update your site identification information); a component of a First or a Revised Hazardous Waste Part A Permit Application; or a component of the Hazardous Waste Report.
To Provide an Initial Notification (first time submitting site identification information / to obtain an EPA identification number for this location)
If your waste activity is regulated under Subtitle C of the Resource Conservation and Recovery Act (RCRA) and the rules promulgated pursuant to the Act (specifically 40 CFR Parts 260-299), you must submit this form to notify the appropriate State or EPA Regional Office of your regulated waste activities and obtain an EPA Identification Number.
(Go to Table of Contents)
If you are an eligible academic entity opting into 40 CFR Part 262, Subpart K for managing laboratory hazardous wastes AND you have never before submitted site identification information, you must submit this form to notify the appropriate State or EPA Regional Office of your activities. Note: You must check with your State to determine if you are eligible to manage laboratory hazardous waste pursuant to 40 CFR Part 262, Subpart K in order for you to notify.
If you will begin managing hazardous secondary material under 40 CFR 261.2(a)(2)(ii), 40 CFR 261.4(a)(23), (24), or (25) AND you have never before submitted site identification information, you must submit this form, pursuant to 40 CFR 260.42, to notify the appropriate State or EPA Regional Office of your activities. Note: You must check with your State to determine if you are eligible to manage hazardous secondary material under these exclusions in order for you to notify.
To Provide a Subsequent Notification (to update site identification information for this location)
You must use this form to submit a subsequent notification if your site already has an EPA Identification Number and you wish to change information (e.g., generator status, new site contact person, new owner, new mailing address, new regulated waste activity, etc.).
If you have previously submitted site identification information and are an eligible academic entity opting into or withdrawing from 40 CFR Part 262, Subpart K for managing laboratory hazardous wastes, you must use this form. Note: You must check with your State to determine if you are eligible to manage laboratory hazardous waste pursuant to 40 CFR Part 262, Subpart K in order for you to notify.
If you have previously submitted site identification information and are notifying (or re-notifying) that you will begin managing, are managing, or have stopped managing hazardous secondary material under 40 CFR 261.2(a)(2)(ii), 40 CFR 261.4(a)(23), (24), or (25), you must submit this form, pursuant to 40 CFR 260.42, to notify the appropriate State or Regional Office of your activities. Note: You must check with your State to determine if you are eligible to manage hazardous secondary material under these exclusions in order for you to notify.
As a component of a first rcra hazardous waste part a permit application
If your site is planning to treat, store, or dispose of hazardous waste on-site in a unit that is not exempt from obtaining a hazardous waste permit, you must submit this form as part of the Part A Permit Application. Also, if the activity at this site (treatment, storage, or disposal) became newly regulated under RCRA Subtitle C and the rules promulgated pursuant to the Act (specifically 40 CFR Parts 260-299), you must submit this form as part of the Part A Permit Application.
As a Component of a revised rcra hazardous waste part a permit application
(Go to Table
of Contents)
As a component of the hazardous waste report (If marked, see sub-bullet below)
If you are required to submit a Hazardous Waste Report indicating the amount of hazardous waste you generate, treat, recycle, dispose, ship off-site, or receive from off-site, you must fill out this form. A Site ID Form submitted with a Hazardous Waste Report is equivalent to a Subsequent Notification.
Site was a TSD facility and/or generator of ≥ 1,000 kg of hazardous waste, > 1 kg of acute hazardous waste, or > 100 kg of acute hazardous waste spill cleanup in one or more months of the report year (or State Equivalent LQG regulations)
The purpose of this check box is to distinguish between sites that meet the criteria and are required to file a report versus those who file voluntarily or by State-only requirement but were not a treatment, storage, and disposal facility (TSDF) or a Large Quantity Generator (LQG) during the report year. Sites required to file the report should place an “X” in this box, while non-LQG/TSD sites should not. For more information about who must file a report, refer to “WHO MUST FILE THE 2015 HAZARDOUS WASTE REPORT” section of the 2015 Hazardous Waste Report Instructions and Form booklet.
Item 2 – Site EPA Id Number
Provide your EPA Identification Number in Item 2 for this site. The first two characters of the EPA Identification Number must be a valid State postal code. Be sure to include your EPA Identification number at the top of all pages of the form (as well as on any attachments to the Site ID Form).
NOTE
|
If this is your Initial Notification for this site, leave the EPA Identification Number blank and proceed to Item 3.
|
Item 3 and 4 – Site Name and Location
Provide the legal name of your site and a complete location address. Please note that the address you give for Item 4, Site Location, must be a physical address, not a post office box or route number. Only foreign hazardous waste transporters, with their headquarters located outside the U.S., may provide a Site Location Country outside of the U.S.
NOTE
|
A new EPA Identification Number is required if you change the location of your site.
(Go to Table
of Contents) |
Item 5 – Site Land Type
Place an “X’ in the box that best describes the land type of your site. Select only one type: Private, County, District, Federal, Tribal (see below), Municipal, State, or Other. If your site’s Land Type could be described as Municipal and another Land Type, such as County, District, or Tribal, do not place an “X” in Municipal. Instead, choose the other appropriate Land Type. (For example, if your site’s Land Type is both Municipal and County, you would place an “X” in the box for County.) You may explain this in Item 13 – Comments.
Tribal - A member of one of the tribes/entities on the list of Federally recognized American Indian tribes and Alaskan Native entities located at: http://www.epa.gov/tribal/whereyoulive/tribes-a-z.htm.
Item 6 – North American Industry Classification System (NAICS) Code(s)
Box A must be completed. Completing Boxes B-D is recommended, if applicable.
Box A
Provide the North American Industry Classification System (NAICS) code that best describes your site’s primary business production process for your products or services. Referencing the latest NAICS codes, use the 6-digit code (most specific description) if available for your business; if not, use the 5-digit code; do not enter any four (4) or less digit codes.
Boxes B – D
List other NAICS codes that describe the other business production processes for your site. Referencing the latest NAICS codes, use the 6-digit code (most specific description) if available for your business; if not, use the 5-digit code; do not enter any four (4) or less digit codes.
Check with your accounting or business staff to determine your NAICS code(s); the NAICS code is used in tax reporting and other business reports. You can obtain additional information about NAICS codes at http://www.census.gov/eos/www/naics.
Item 7 – Site Mailing Address
Please enter the Site Mailing Address. If the Mailing Address and the Location of Site (Item 4) are the same, you can enter “Same as Item 4” in the box for Item 7.
(Go to Table
of Contents)
Item 8 – Site Contact Person
Enter the name, title, business address, telephone number, extension, fax number, and e-mail address of the individual who should be contacted regarding the information submitted in the Site ID Form. A Subsequent Notification is recommended when the Site Contact Person changes. Do not enter other contact persons here; if there are other persons, who may be contacted about this submission, list them and their other contact information in Item 13 – Comments. If the person completing the Hazardous Waste Report is not the primary site RCRA hazardous waste contact, enter the primary site RCRA hazardous waste contact here and add the contact information for the person completing the Hazardous Waste Report in Item 13 – Comments.
NOTE
|
This is NOT the Facility Permit Contact information. The Facility Permit Contact information should be entered on the RCRA Hazardous Waste Part A Permit Application.
|
Item 9 – Legal Owner and Operator of the Site
This section should be used to indicate all owners and operators of this site.
Name of Site’s Legal Owner
Provide the name of your site’s legal owner(s). This includes owner(s) of the building(s) and land. Please review these definitions:
Owner – The person who owns a RCRA site or part of a RCRA site. Note: This includes the owner(s) of the building(s) and/or land. This may be an individual, company, or business name. See Person.
Person – An individual, trust, firm, joint stock company, Federal Agency, corporation (including a government corporation), partnership, association, State, municipality, commission, political subdivision of a State, or any interstate body.
Date Became an Owner
Indicate the date on which the above entity became the owner of your site. Enter dates as in this example: For April 22, 2015, enter 04/22/2015. This is a required field and a date must be reported.
Owner Type
(Go to Table
of Contents)
Tribal - A member of one of the tribes/entities on the list of Federally recognized American Indian tribes and Alaskan Native entities located at: http://www.epa.gov/tribal/whereyoulive/tribes-a-z.htm.
Legal Owner Address
Enter the address of the legal owner. If the address and the Location of Site (Item 4) are the same, you can enter “Same as Item 4” in the box for Item 9.
Use the Comments section in Item 13 to list any additional owners, their names, the dates they became owners, owner type, mailing address, and which owner(s), if any, are no longer owners since your last submission of this form. If necessary, attach a separate sheet of paper. Remember to enter your site’s EPA Identification Number in the top left-hand corner of each sheet.
Name of Site’s Operator
Provide the name of your site’s operator. Please review these definitions:
Operator – The person responsible for the overall operation of a RCRA site. Note: This is the legal entity which controls the RCRA site operation rather than the plant or site manager. This is usually a company or business name, but may be an individual. See Person.
Person – An individual, trust, firm, joint stock company, Federal Agency, corporation (including a government corporation), partnership, association, State, municipality, commission, political subdivision of a State, or any interstate body.
Date Became an Operator
Indicate the date on which the above entity became the operator of your site. Enter dates as in this example: For April 22, 2015, enter 04/22/2015. This is a required field and a date must be reported.
Operator Type
Place an “X’ in the box that best describes the operator type for your site. Select only one type: Private, County, District, Federal, Tribal (see below), Municipal, State, or Other. If your site’s Operator Type could be described as Municipal and another Operator Type, such as County, District, or Tribal, do not place an “X” in Municipal. Instead, choose the other appropriate Operator Type. (For example, if your site’s Operator Type is both Municipal and County, you would place an “X” in the box for County.) You may explain this in Item 13 – Comments.
Tribal - A member of one of the tribes/entities on the list of Federally recognized American Indian tribes and Alaskan Native entities located at: http://www.epa.gov/tribal/whereyoulive/tribes-a-z.htm.
(Go to Table
of Contents)
NOTE
|
A subsequent notification is recommended when the owner or operator of a site changes. Because an EPA Identification Number is site-specific, the new owner will keep the existing EPA Identification Number for that location. If your business moves to another location, the owner or operator must notify the State or EPA Regional Office of this change. Since your business has changed locations, a new EPA Identification Number will be assigned.
|
Item 10 – Type of Regulated Waste Activity
Mark box “Yes” or box “No” as appropriate for all current activities (as of the date submitting the form) at this site; complete any additional boxes as instructed. Current activities mean activities that are in effect when the form is submitted or those that the site plans to begin after EPA Identification Number assignment. The information you provide in Item 10 will be considered current as of the date you certify the form. If the site is no longer a generator as of the date you certify the form, you should mark the “No” (not a generator) box for Generator of Hazardous Waste.
NOTE
|
You must report your current regulated waste activities as of the date of submitting the Site ID Form. For the Hazardous Waste Report, your current status may be different than the status requiring the report during the calendar year.
|
Hazardous Waste Activities (complete all parts 1 through 10)
NOTE
|
Listed below are the Federal generator status definitions. If, however, the State where your site is located has definitions different from the Federal definitions, you must use the State definitions.
|
Generator of Hazardous Waste (at your site):
(Go to Table
of Contents)
If “Yes”, place an “X” in only one of the following – a, b, or c.
LQG: Large Quantity Generator
For purposes of providing information in this form, the site is a Large Quantity Generator (LQG) if the site generates any of the following amounts in a calendar month:
Greater than or equal to 1,000 kilograms (kg; 2,200 pounds [lbs]) of non-acute RCRA hazardous waste; or
Greater than 1 kg (2.2 lbs) of any RCRA acute hazardous waste listed in sections 261.31 or 261.33(e); or
Greater than 100 kg (220 lbs) of any residue or contaminated soil, waste, or other debris resulting from the cleanup of a spill, into or on any land or water, of any acute hazardous wastes listed in sections 261.31 or 261.33(e).
NOTE
|
As discussed earlier, a RCRA LQG is a site that is neither a CESQG nor a SQG. For purposes of clarity, we describe above the situations when a site would be a LQG.
If, in addition to being a LQG, you recycle hazardous wastes at your site, mark both this box and Item 10.A.4.
Hazardous secondary material managed under 40 CFR 261.2(a)(2)(ii), 40 CFR 261.4(a)(23), (24), or (25) DOES NOT count towards your generator status. However, you must check with your State to determine if you are eligible to manage hazardous secondary material under these exclusions.
|
SQG: Small Quantity Generator
This site is a SQG if the site meets all of the following criteria:
Generates, in any calendar month, more than 100 kg (220 lbs) but less than 1,000 kg (2,200 lbs) of RCRA hazardous waste; and
Does not generate, in any calendar month, more than 1 kg (2.2 lbs.) of acute hazardous waste listed in sections 261.31 or 261.33(e); and
Does not generate more than 100 kg (220 lbs) of material from the cleanup of any residue or contaminated soil, waste, or other debris resulting from the cleanup of a spill, into or on any land or water, of any acute hazardous wastes listed in sections 261.31 or 261.33(e).
NOTE
|
The definition of a SQG found at 40 CFR 260.10 is outdated. The EPA plans to make the appropriate conforming change in the future. Moreover, here in this document, for purposes of clarity, we include those situations where a SQG also may have generated amounts of acute hazardous wastes and still maintain its regulatory status as a SQG.
(Go to Table
of Contents) |
CESQG: Conditionally Exempt Small Quantity Generator
This site is a CESQG if the site generates less than or equal to the following amounts in a calendar month:
(i) 100 kg (220 lbs) of hazardous waste; and
(ii) 1 kg (2.2 lbs) of acute hazardous wastes listed in sections 261.31, or 261.33(e); and
(iii) 100 kg (220 lbs) of any residue or contaminated soil, waste, or other debris resulting from the cleanup of a spill, into or on any land or water, of any acute hazardous wastes listed in sections 261.31, or 261.33(e).
NOTE
|
A CESQG is defined at 40 CFR 261.5(a) as a site that generates less than or equal to 100 kg (220 lbs) of hazardous waste. However, the regulations at 40 CFR 261.5(e) discuss situations where a CESQG could be subject to full regulation. For purposes of clarity, we describe all those situations where a site continues to be a CESQG.
If you generate acute hazardous wastes listed in 40 CFR 261.31, 261.32, or 261.33(e), please refer to 40 CFR 261.5(e) to determine the circumstances under which you must notify the EPA.
|
If you marked “Yes” above, indicate your other generator activities. Mark “Yes” or “No” for the other hazardous waste activities listed below that may occur at this site. Complete all parts 2-10.
Short-Term Generators
Mark “Yes” if the site is currently generating hazardous waste only as the result of a one-time, non-recurring, temporary event that is not related to normal production processes. In other words, short-term generators produce hazardous waste from a particular activity for a limited time and then cease conducting that activity. Short-term generators would not be considered episodic generators because episodic generators have the potential to generate on a regular basis (for example, a facility that fluctuates from SQG to LQG in one month is not a short-term generator). Examples of short-term generators include: (1) one-time highway bridge waste generation; (2) underground storage tank removals; (3) generation of off-spec or out-of-date chemicals at a site that normally doesn’t generate hazardous waste; (4) remediation or spill clean-up at sites with no previous RCRA EPA Identification Number; and (5) site or production process decommissions by a new operator. If you mark “Yes”, you must provide an explanation of your short-term generation event in Item 13 – Comments.
U.S. Importer of Hazardous Waste
(Go to Table
of Contents)
Mixed Waste Generator
Mark “Yes” if you are a generator of mixed waste (waste that is both hazardous and radioactive). RCRA defines “mixed waste” as waste that contains both hazardous waste and source, special nuclear, or by-product material subject to the Atomic Energy Act (AEA), RCRA Section 1004(41), 42 U.S.C. 6903 (63 FR 17414; April 9, 1998). See the “DEFINITIONS” section.
Transporter of Hazardous Waste
Transporter
You transport hazardous waste within the U.S. The Federal regulations for hazardous waste transporters are found in 40 CFR Part 263.
Transfer Facility (at your site)
You are a hazardous waste transfer facility, at your site, if you hold manifested hazardous waste(s) at your site for a period of ten (10) days or less while the waste is in transit. The Federal regulations for hazardous waste transfer facilities are found in 40 CFR Part 263.12.
Treater, Storer, or Disposer of Hazardous Waste (at your site)
If you treat, store, or dispose of hazardous waste, mark “Yes.” A RCRA Hazardous Waste Part B Permit is required for this activity. Contact the appropriate office for your State for more information. The Federal regulations for owners and operators of permitted treatment, storage, and disposal facilities (TSDFs) are found in 40 CFR Parts 264, 265, 266, and 270.
Mark “No” if any of the following conditions are true for your facility:
This facility does not receive hazardous waste from other generators and ships all waste off-site for management within the regulatory timeframe.
This facility is only involved with on-going post-closure activities, corrective actions under the Hazardous and Solid Waste Amendments of 1984 (HSWA), or a consent order under a non-traditional permit or without a RCRA permit being required.
Receives waste from off-site but does not store greater than 10 days before re-shipping (i.e., transfer facility).
NOTE
|
If your site is a destination facility for universal wastes in addition to being a TSDF for other RCRA hazardous wastes, mark “Yes” for both this box and Item 10.B.2.
|
Recycler of Hazardous Waste (at your site)
(Go to Table
of Contents)
NOTE
|
If your site, in addition to being a recycling site for hazardous waste, is a treater, storer, or disposer of hazardous waste, mark “Yes” for both this box and Item 10.A.6. If your site is a destination facility for universal wastes in addition to being a recycling site for other RCRA hazardous wastes, mark “Yes” for both this box and Item 10.B.2.
|
Exempt Boiler and/or Industrial Furnace (at your site)
If “Yes”, place an “X” in all that apply.
Small Quantity On-Site Burner Exemption
You burn small quantities of hazardous waste in an on-site boiler or industrial furnace in accordance with the conditions in 40 CFR 266.108, place an “X” in the box to indicate that you qualify for the Small Quantity On-Site Burner Exemption.
Smelting, Melting, and Refining Furnace Exemption
You process hazardous wastes in a smelting, melting, or refining furnace solely for metals recovery, as described in 40 CFR 266.100(d), or to recover economically significant amounts of precious metals, as described in 40 CFR 266.100(g), or if you process hazardous wastes in a lead recovery furnace to recover lead, as described in 40 CFR 266.100(h), place an “X’ in the box to indicate that you qualify for the Smelting, Melting, and Refining Furnace Exemption.
Underground Injection Control (at you site)
If you generate, treat, store, or dispose of hazardous waste and place the waste or its residuals into an underground injection well (e.g., a Class I well) located at your site, mark “Yes”. The Federal regulations for owners and operators of underground injection wells are found in 40 CFR Part 148.
Receives Hazardous Waste From Off-site (at your site)
If you received hazardous waste from another site, whether this waste was received as a commercial transaction or waste received from a restricted group of off-site generators, mark “Yes”.
In addition to the above, mark “Yes” or “No” for the other regulated waste activities listed below that may occur at this site. Complete Items B, C, and D as appropriate.
UniversAl Waste Activities (at your site)
Refer to your State-specific requirements and definitions for universal waste. Also, refer to 40 CFR 261.9 and 40 CFR Part 273 for the Federal regulations covering universal waste. Complete parts 1 and 2.
Large Quantity Handler of Universal Waste (LQHUW)
(Go to Table
of Contents)
Destination Facility for Universal Waste
Mark “Yes” if you treat, dispose, or recycle universal wastes on-site. A hazardous waste permit is required if you treat or dispose of universal wastes; a permit may be required if you recycle universal wastes.
NOTE
|
If your site, in addition to being a destination facility for universal wastes, is also a TSDF for RCRA hazardous wastes, mark “Yes” for both this box and Item 10.A.6. In addition, if your site recycles RCRA hazardous wastes, mark “Yes” for both this box and Item 10.A.7.
|
Used Oil Activities
Mark the appropriate box(es) to indicate which used oil management activities are taking place at this site. The Federal regulations for used oil management are found in 40 CFR Part 279. Complete all parts 1 through 4.
Used Oil Transporter
If “Yes”, place an “X” in all that apply.
Transporter
You transport used oil within the U.S. The Federal regulations for used oil transporters are found in 40 CFR Part 279.40-47.
Transfer Facility (at your site)
You own or operate a used oil transfer facility. The Federal regulations for used oil transfer facilities are found in 40 CFR Part 279.40-47.
Used Oil Processor and/or Re-refiner (at your site)
If “Yes”, place an “X” in all that apply.
Processor
You process used oil. The Federal regulations for processors of used oil are found in 40 CFR Part 279.50-59.
Re-refiner
(Go to Table of Contents)
You refine used oil. The Federal regulations for re-refiner of used oil are found in 40 CFR Part 279.50-59.
Off-Specification Used Oil Burner (at your site)
You burn off-specification used oil fuel. Mark “Yes” to indicate this used oil management activity.
Used Oil Fuel Marketer (at your site)
If “Yes”, place an “X” in all that apply.
Marketer Who Directs Shipment of Off-Specification Used Oil to Off-Specification Used Oil Burners
You are a marketer who directs shipment of off-specification used oil to off-specification used oil burners. The Federal regulations for off-specification used oil are found in 40 CFR Part 279.70-75.
Marketer Who First Claims the Used Oil Meets the Specification
You are the first to claim that used oil meets the used oil specification established in 40 CFR 279.11.
NOTE
|
If either of these boxes is marked, you must also notify (or have previously notified) as a used oil transporter (10.C.1), used oil processor/re-refiner (10.C.2), or off-specification used oil fuel burner (10.C.3), unless you are a used oil generator. (Used oil generators are not required to notify.)
|
Eligible Academic Entities with Laboratories – Notification for opting into or withdrawing from managing laboratory hazardous wastes pursuant to 40 CFR Part 262, Subpart K
Note: Fill out Box D ONLY if you are at least one of the following: a college or university; a teaching hospital that is owned by or has a formal written affiliation agreement with a college or university; or a non-profit research institute that is owned by or has a formal written affiliation agreement with a college or university; AND you have checked with your State to determine if 40 CFR Part 262, Subpart K is effective in your State and for any State-specific requirements. See EPA’s website for more information about these regulations: http://www.epa.gov/wastes/hazard/generation/labwaste/implementation.htm.
(Go to Table
of Contents)
NOTE
|
Eligible academic entities with laboratories must complete a separate Site ID Form for each site (i.e., EPA Identification Number) that is managing hazardous waste under Subpart K. All laboratories with the same EPA Identification Number will be regulated under this Subpart. If eligible academic entities with laboratories withdraw from Subpart K, all laboratories with the same EPA Identification Number associated with the withdrawal from Subpart K will be regulated under 40 CFR 262.34(c) requirements (or 40 CFR 261.5 for CESQGs).
|
Opting Into or Currently Operating Under 40 CFR Part 262, Subpart K for the Management of Hazardous Wastes in Laboratories
Mark “Yes” for this box if you are an eligible academic entity and you elect to opt into or are currently operating under 40 CFR Part 262, Subpart K for the hazardous wastes generated in your laboratories. If you mark “Yes” for this box, you must place an “X” in at least one of the following to indicate your type of eligible academic entity. Place an “X” in all that apply:
College or University
You are an eligible college or university if you are a private or public, post-secondary, degree-granting, academic institution, that is accredited by an accrediting agency listed annually by the U.S. Department of Education.
Teaching Hospital that is owned by or has a formal written affiliation agreement with a college or university
You are an eligible teaching hospital if you are a hospital that trains students to become physicians, nurses, or other health personnel and is either: (1) owned by a college or university, or (2) has a master affiliation agreement and program letter of agreement, as defined by the Accreditation Council for Graduate Medical Education, with an accredited medical program or medical school.
Non-profit Institute that is owned by or has a formal written affiliation agreement with a college or university
(Go to Table of Contents)
You are an eligible non-profit institute if you are an organization that conducts research as its primary function and files as a non-profit organization under the tax code of 26 U.S.C. 501(c)(3) and is either: (1) owned by a college or university, or (2) has a formal written affiliation agreement with a college or university that establishes a relationship between institutions for the purposes of research and/or education and is signed by authorized representatives from each institution. A relationship on a project-by-project or grant-by-grant basis is not considered a formal written affiliation agreement.
Withdrawing from 40 CFR Part 262, Subpart K for the Management of Hazardous Wastes in Laboratories
Mark “Yes” for this box if you have previously elected to opt into 40 CFR Part 262, Subpart K and are now withdrawing from participation in this optional set of alternative requirements for hazardous waste generation in laboratories. Withdrawing generators will automatically revert to regulation under 40 CFR 262.34(c) requirements (or 40 CFR 261.5 for CESQGs). If marking “Yes” for this box, please include comments in Item 13 – Comments that explain your reasons for withdrawing from Subpart K.
Item 11 – Description of Hazardous Wastes
Complete this item if you marked “Yes” for any activity 1 (a-c), 6, 7, or 8 in Item 10.A. You will need to refer to 40 CFR Part 261 to complete this item. Part 261 identifies those solid wastes which the EPA defines as hazardous and regulates under RCRA. If you need help completing this section, please contact your State Office.
Waste Codes for Federally Regulated Hazardous Wastes
Please list the waste codes of the Federal hazardous wastes (described in 40 CFR Part 261) handled at your site. List them in the order they are presented in the regulations using the appropriate 4-digit code(s) (e.g., D001, D003, F007, U112).
NOTE
|
If you handle more hazardous wastes than will fit under Item 11.A, please continue under Item 13 – Comments or on an extra sheet. Remember to include your EPA Identification Number on the top of each page. If you handle a large number of codes, you may copy the list in this booklet and mark the ones that you handle. Attach any additional sheets to the Site ID Form. Remember to include your EPA Identification Number on the top of each page.
|
Waste Codes for State-Regulated (i.e., non-Federal) Hazardous Wastes
If you manage State-regulated hazardous wastes that have a State waste code, enter the appropriate code(s) in the box(es) provided. Please list the waste codes of the State-regulated hazardous wastes handled at your site in the order they are presented in the regulations.
NOTE
|
If you handle more hazardous wastes than will fit under Item 11.B, please continue under Item 13 – Comments or on an extra sheet. Remember to include your EPA Identification Number on the top of each page.
|
(Go to Table
of Contents)
Item 12 – Notification of Hazardous Secondary Material (HSM) Activity
Mark “Yes” if you are notifying under 40 CFR 260.42 that you will begin managing, are still managing, or will stop managing hazardous secondary material under 40 CFR 261.2(a)(2)(ii), 40 CFR 261.4(a)(23), (24), or (25). Mark “No” if you are not notifying under 40 CFR 260.42. Note: You must check with your State to determine if you are eligible to manage hazardous secondary material under these regulations.
NOTE
|
If you mark “Yes”, you must fill out the Addendum to the Site ID Form: Notification of Hazardous Secondary Material Activity. See instructions for this Addendum after Item 14.
|
Item 13 – Comments
Use this section as needed to provide additional information for Items 1 through 12. Include the item number and box letter (if any) for each comment you make. You may attach additional sheets if needed. Remember to include your EPA Identification Number on the top of each page.
Item 14 – Certification
This certification must be signed and dated by the owner(s), operator(s), responsible official(s), or authorized representative(s) of the site. See 40 CFR 270.11 for more information on signatories in general. See also 40 CFR 270.10(b) for additional Hazardous Waste Part A Permit Application signatory specifics. An “authorized representative” is a person responsible for the overall operation of the site (i.e., a plant manager or superintendent, or a person of equal responsibility).
NOTE
|
All Site ID Form submissions must include this certification to be complete.
|
(Go to Table
of Contents)
(Go to Table
of Contents)
(Go to Table
of Contents)
Addendum to the Site Identification Form:
Notification of
Hazardous Secondary Material Activity
You Must Fill Out this Section if:
You are located in a State that allows you to manage excluded hazardous secondary material under 40 CFR 261.2(a)(2)(ii), 261.4(a)(23), (24), or (25). See http://www.epa.gov/epawaste/hazard/dsw/statespf.htm for a list of eligible States; AND
You will begin managing, are still managing, or will stop managing excluded hazardous secondary material under 40 CFR 261.2(a)(2)(ii), 40 CFR 261.4(a)(23), (24), or (25) and must notify the appropriate State or Regional Office of your activities, pursuant to 40 CFR 260.42. These regulations exclude certain hazardous secondary material being reclaimed from the RCRA Subtitle C definition of solid waste provided certain requirements and conditions are met. See EPA’s website for more information about these regulations: http://www.epa.gov/osw/hazard/dsw/rulemaking.htm.
Complete all parts 1 – 3.
NOTE
|
You must be managing excluded hazardous secondary material in compliance with 40 CFR 261.2(a)(2)(ii), 261.4(a)(23), (24), and/or (25) (or State equivalent). Do not include any information regarding your hazardous wastes in this section. See 73 FR 64668 or http://www.epa.gov/epawaste/hazard/dsw/impresource.htm for more information on these exclusions.
You must submit a completed Site ID Form, including this Addendum, prior to operating under the exclusion(s) and by March 1 of each even-numbered year thereafter to your regulatory authority using the Site ID Form as pursuant to 40 CFR 260.42. Persons who must satisfy this notification requirement can submit this information at the same time as their Hazardous Waste Report (which is also due by March 1 of each even-numbered year).
If you stop managing hazardous secondary material in accordance with the exclusion(s) and do not expect to manage any amount of hazardous secondary material under the exclusion(s) for at least one year, you must also submit a completed Site ID Form, including this Addendum, within thirty (30) days pursuant to 40 CFR 260.42.
Remember to include your EPA Identification Number on the top of each page.
|
(Go to Table
of Contents)
Item 1 – Indicate Reason for Notification (include dates where requested)
Place an “X” in the box for the reason that applies to you:
Facility will begin managing excluded hazardous secondary material as of (mm/dd/yyyy)
Place an “X’ in this box if you are notifying that you will begin managing hazardous secondary material under the exclusion(s).
Facilities must notify prior to operating under the exclusion(s).
If placing an “X’ in this box, list the date (mm/dd/yyyy) when you will begin managing hazardous secondary material under 40 CFR 261.2(a)(2)(ii), 40 CFR 261.4(a)(23), (24), or (25). Note: If the facility had previously notified that it will stop managing hazardous secondary material in the past but will now begin anew, list the next planned start date.
Facility is still managing excluded hazardous secondary material/re-notifying as required by March 1 of each even-numbered year
Place an “X” in this box if you are re-notifying that you are still managing hazardous secondary material under the exclusion(s). Note: You must have previously notified that you began managing hazardous secondary material in order to check this box.
Facilities must notify by March 1 of each even-numbered year.
If placing an “X” in this box, you do not have to list a date.
Facility has stopped managing excluded hazardous secondary material as of (mm/dd/yyyy) and is notifying as required
Place an “X” in this box, if you are notifying that you have stopped managing hazardous secondary material under the exclusion(s) and do not expect to manage any amount of hazardous secondary material for at least one year (pursuant to 40 CFR 260.42(b)). List the date when you stopped managing hazardous secondary material. Enter the date in “mm/dd/yyyy” format.
Facilities must notify within 30 days of when they stopped managing hazardous secondary material. You are considered to have stopped managing hazardous secondary material if: (1) you stop managing hazardous secondary material completely (e.g., you cease operations); (2) you choose to manage the hazardous secondary material as hazardous waste; (3) you undergo closure and request release from financial assurance per 40 CFR 261.143(h); or (4) you temporarily suspend management of hazardous secondary material for at least one year.
(Go to Table of Contents)
Only place an “X” in this box if you have stopped managing all hazardous secondary material under the exclusion(s). For example, if your facility only stopped managing one hazardous secondary material, but continued to manage another hazardous secondary material, you would leave this box blank since your facility continues to manage some amount of hazardous secondary material.
If you submit a notification that you have stopped managing hazardous secondary material, you do not need to re-notify (unless you choose to manage hazardous secondary material again, in which case you would have to submit a notification prior to managing). After submitting a stop notification, you can leave the Addendum blank for subsequent submissions, including any subsequent Hazardous Waste Report submissions.
Item 2 – Description of Excluded Hazardous Secondary Material (HSM) Activity
In the table provided on the Addendum to the Site Identification Form, list your appropriate facility code, each waste code for the hazardous secondary material you manage, the estimated and actual quantities in short tons for each hazardous secondary material, and the appropriate land-based code for how you manage the hazardous secondary material. Do not include any information regarding your hazardous wastes in this section. See examples below on how to answer this question.
Facility Code
Using the facility codes, found in the “HAZARDOUS SECONDARY MATERIAL (HSM) FACILITY CODES” section of this booklet, enter the appropriate 2‑digit code(s) that correctly describes your facility. If more than one code applies to your facility, enter each 2-digit code on a separate row. Each hazardous secondary material should be reported by facility code.
Waste Code(s) for HSM
Use the box provided to enter the appropriate 4-digit hazardous waste code(s) that would apply to your hazardous secondary material if you managed it as hazardous waste (i.e., the waste code(s) that would apply if you did not manage your material in accordance with 40 CFR 261.2(a)(2)(ii), 40 CFR 261.4(a)(23), (24), or (25)).
NOTE
|
If you list more codes or manage more hazardous secondary material than will fit in the table under Item 2, please continue under Item 13 – Comments, or on an extra sheet. Remember to include your EPA Identification Number on the top of each page.
|
Estimate Short Tons of Excluded HSM to be Managed Annually
In the box provided, enter your estimated tonnage (using short tons) of hazardous secondary material you expect to manage annually. Convert all physical quantities (e.g., gallons, cubic yards, kilograms, metric tons, etc.) to short tons (1 short ton = 2,000 pounds) and round to the nearest ton (no decimals). Note: Your estimated tonnage should be for the entire amount of hazardous secondary material to be reclaimed NOT just the quantity of constituent or product reclaimed.
(Go to Table
of Contents)
Actual Short Tons of Excluded HSM Managed During the Most Recent Odd-Numbered Year
Report the tonnage (using short tons) of each hazardous secondary material you actually managed during the most recent odd-numbered year. For example, if you are submitting this notification on February 20, 2016, enter the amount you actually managed during 2015 (i.e., the tonnage you managed from January 1, 2015 to December 31, 2015). Convert all physical quantities (e.g., gallons, cubic yards, kilograms, metric tons, etc.) to short tons (1 short ton = 2,000 pounds) and round to the nearest ton (no decimals). Note: Your actual tonnage should be for the entire amount of hazardous secondary material that was sent for reclamation NOT just the quantity of constituent or product reclaimed. If this is your initial notification, enter “0”.
Land-based Unit Code
Using the land-based unit codes, found in the “HAZARDOUS SECONDARY MATERIAL (HSM) LAND BASED UNIT CODES” section of this booklet, enter in the 2‑digit code that best describes the land-based unit you use or will use to manage the hazardous secondary material. If you do not use any land-based units, enter “NA”. If you use the code “OT” (Other), please describe your land-based unit in Item 13 – Comments. If more than one land-based unit code applies to a hazardous secondary material, list it separately using another row.
Examples for Reporting Hazardous Secondary Material Activity
Example 1
A pharmaceutical manufacturer generates spent solvents that are characteristic for ignitability (D001). The manufacturer plans to manage spent solvents under 40 CFR 261.2(a)(2)(ii) and 261.4(a)(24) by sending some amount to a reclaimer within its own company and the rest off-site to a reclamation facility within the U.S. The manufacturer will not manage any spent solvents in a land-based unit. Following the regulations, the manufacturer submits an initial notification prior to managing its spent solvents under the exclusions. The facility would report its hazardous secondary material activity as follows:
|
|
|
|
|
02 |
D001 |
15 |
0 |
NA |
06 |
D001 |
40 |
0 |
NA |
Example 2
A steel manufacturer generates electric arc furnace dust and spent pickle liquor from one of its steel operations. The manufacturer sends electric arc furnace dust (K061) off-site to a reclamation facility within the U.S. and reclaims spent pickle liquor (K062) on-site. Neither hazardous secondary material is managed in a land-based unit. The steel manufacturer has managed both hazardous secondary material under 40 CFR 261.2(a)(2)(ii) and 261.4(a)(24) for a number of years and it is now time to re-notify. The facility would report its hazardous secondary material activity as follows:
(Go to Table
of Contents)
|
|
|
|
|
01 |
K062 |
60 |
52 |
NA |
06 |
K061 |
20,000 |
22,468 |
NA |
Example 3
A reclamation facility has been receiving and reclaiming spent solvents under 40 CFR 261.2(a)(2)(ii) and 261.4(a)(24) for a number of years. The facility receives and reclaims spent solvents from multiple hazardous secondary material generators, some of which are within the same company. No spent solvents are managed in a land-based unit. It is now time to re-notify. The facility would report its hazardous secondary material activity as follows:
|
|
|
|
|
03 |
D001; F002; F003; F005 |
6,000 |
7,533 |
NA |
03 |
D001; D035; F002; F003 |
1,500 |
918 |
NA |
07 |
D001; F002; F003; F005 |
3,000 |
3,509 |
NA |
07 |
D001; D038; F002; F003 |
1,000 |
523 |
NA |
Example 4
A smelting operation generates furnace bricks that are characteristic for chromium (D007) and sends them off-site for reclamation. Before shipping the bricks off-site, the facility manages some of the bricks in a containment building and the rest in a pile on the land. The facility has been managing the bricks under 40 CFR 261.4(a)(24) for a number of years and must now re-notify. The facility would report its activity as follows:
|
|
|
|
|
06 |
D007 |
200 |
235 |
NA |
06 |
D007 |
115 |
126 |
PL |
Example 5
An intermediate facility has been managing wastewater treatment sludges from electroplating operations (F006) for the past seven years but, due to company consolidation, it will soon shut down. In accordance with 40 CFR 260.42, the facility notifies that it will stop managing hazardous secondary material. The facility would report its activity as follows:
|
|
|
|
|
08 |
F005 |
0 |
(Go to Table
of Contents) |
NA |
Item 3 – Facility has Financial Assurance Pursuant to 40 CFR 261.4(a)(24)(vi)
Financial assurance is required for reclaimers (07, 11) and intermediate (08) facilities managing hazardous secondary material under 40 CFR 261.4(a)(24) and (25). See EPA’s website for more information about these regulations: http://www.epa.gov/epawaste/hazard/dsw/impresource.htm.
Mark “Yes”, if you have financial assurance pursuant to 40 CFR 261.4(a)(24)(vi) AND you use at least one facility code that is 07, 08, or 11 in Item 2.a above. For example, the facilities in Examples 3 and 5 above are required to have financial assurance because the facility codes are 07 and 08, respectively.
Mark “No”, if you do NOT have financial assurance pursuant to 40 CFR 261.4(a)(24)(vi). Note: Reclaimers (07, 11) and intermediate (08) facilities must have financial assurance in order to manage hazardous secondary material under 40 CFR 261.4(a)(24) and (25). Answering “No” to this question may mean you are in violation of these regulations if you report facility codes 07, 08, or 11. For example, the facilities in Examples 1, 2, and 4 above are not required to have financial assurance because these facilities did not report facility codes of 07, 08, or 11.
(Go to Table
of Contents)
Instructions for Filling Out the
Hazardous Waste Permit
information Form
General Instructions
Please type or print, leaving only one blank box between words. Abbreviate, if necessary, to stay within the number of boxes allowed for each item. Some items in the form require narrative explanation. If more space is necessary to answer a question, use the space provided in Item 13 and reference the item number to which the additional information applies or attach a separate sheet entitled “Additional Information.” Remember to include your EPA Identification Number and Site Name in the upper left-hand corner of each attached page.
Unless otherwise specified in the instructions to the form, each item must be answered. To indicate that each item has been considered, enter “NA” for “not applicable,” if a particular item does not fit the circumstances or characteristics of your facility or activity.
For a Revised Part A Permit Application, circle the item numbers with new information or changes.
Item-By-Item Instructions
Item 1 – Facility Permit Contact
Give the name, title, work telephone number, and e-mail of a person who is thoroughly familiar with the activities at the facility that require a RCRA Hazardous Waste Permit and with the facts reported in the Hazardous Waste Permit Information Form. This person must be available to be contacted by offices reviewing the permit application, if necessary. If the Facility Permit Contact person is the same as the Site Contact Person identified in Item 8 of the RCRA Subtitle C Site Identification Form (Site ID Form), you may print “Same as Site Contact” in this box.
Item 2 – Facility Permit Contact Mailing Address
Enter the mailing address for the facility permit contact. If the mailing address is the same as the Site Mailing Address (Item 7) on the Site ID Form, you may print “Same as Site Mailing Address” in this box.
Item 3 – Operator Mailing Address and Telephone Number
(Go to Table
of Contents)
Item 4 – Facility Existence Date
Enter the appropriate date that applies to your facility from the following:
The date that hazardous waste operations at the facility commenced;
The date construction on the facility commenced; or
The date operation is expected to begin.
Item 5 – Other Environmental Permits
Permit Type
Using the codes listed below, enter a letter on the form for all other environmental permits the facility has received, or for which the facility has filed an application, even if the permit has not yet been received.
N = NPDES (National Pollutant Discharge Elimination System) Clean Water Act
P = PSD (Prevention of Significant Deterioration) Clean Air Act
R = RCRA (Resource Conservation and Recovery Act)
U = UIC (Underground Injection Control) Safe Drinking Water Act
F = EPA 404 (Dredge or Fill Permits under Section 404 of the Clean Water Act)
E = Other relevant environmental permits. List any other relevant Federal (e.g., permits under the Ocean Dumping Act), State (e.g., State permits for new air emission sources in nonattainment areas under Part D of the Clean Air Act or State permits under Section 404 of the Clean Water Act), or local environmental permits or applications.
Permit Number
Give the number of each presently effective permit issued to the facility for each program, or if you have previously filed an application, but have not yet received a permit, give the number of the application and note this in the description. You may list additional permit numbers on a separate sheet of paper if you have more than one currently effective permit for your facility under a particular permit program. Remember to include your EPA Identification Number and Site Name in the upper left-hand corner of each attached page.
Description
Use the space provided for any additional information identifying or describing the permits.
(Go to Table
of Contents)
Item 6 – Nature of Business
Briefly describe the nature of your business (e.g., products produced or services provided). If more space is needed, please attach additional sheets. Remember to include your EPA Identification Number and Site Name in the upper left-hand corner of each attached page.
Item 7 – Process Codes and Design Capacities
The information in Item 7 describes all the processes that will be used to treat, store, or dispose of hazardous waste at the facility. The process code and design capacity of each process must be provided as part of the description. The design capacity of injection wells and landfills at existing facilities should be measured as the remaining, unused capacity. Tank storage should refer to each tank, not each tank farm. Please indicate the location of each process listed in Item 7 on either the map provided for Item 10 or the photographs provided for Item 12. Use the line number from Item 7 to indicate where the process(es) are located. See the form for detailed instructions on Item 7.
NOTE
|
Submission of a Revised Part A Permit Application is required before processes for treating, storing, or disposing of hazardous wastes are changed; before new processes are added; and/or before the design capacities of these processes are increased.
|
Item 8 – Other Processes
Use this space to describe other processes that did not have a specific process code listed in Item 7.A of the form. Follow the instructions for Item 7.A on the form for other process codes (i.e., D99, S99, T04, and X99 process codes). Describe the other processes in Item 13 – Comments.
Item 9 – Description of Hazardous Wastes
(Go to Table
of Contents)
NOTE
|
Submission of a Revised Part A Permit Application is required before a facility begins treating, storing, or disposing of new hazardous wastes not previously identified in the facility’s Part A Permit Application. Changes in the quantity of hazardous waste previously specified in the Part A Permit Application can be made without submitting a Revised Part A Permit Application, provided the quantity does not exceed the process design capacities specified in the first Part A submission.
|
Item 10 - Map
Provide a topographic map or maps of the area extending to a least one mile beyond the property boundaries of the facility. The map must clearly show the following:
The legal boundaries of the facility;
The location and serial number of each of your existing and proposed intake and discharge structures;
All hazardous waste management facilities;
Location of all processes listed in Items 7 and 8 identified by process code;
Each well where you inject fluids underground; and
All springs and surface water bodies in the area, plus all drinking water wells within ¼ mile of the facility which are identified in the public record or otherwise known to you.
If an intake or discharge structure, hazardous waste disposal site, or injection well associated with the facility is located more than one mile from the plant, include it on the map, if possible. If not, attach additional sheets describing the location of the structure, disposal site, or well, and identify the U.S. Geological Survey (or other) maps corresponding to the location. Remember to include your EPA Identification Number and Site Name in the upper left-hand corner of each attached page.
On each map, include the map scale, a meridian arrow showing north, and latitude and longitude at the nearest whole second. On all maps of rivers, show the direction of the current, and in tidal waters, show the directions of the ebb and flow tides. Use a 7-1/2 minute series map published by the U.S. Geological Survey. If a 7-1/2 minute series map has not been published for your facility site, then you may use a 15-minute series map from the U.S. Geological Survey. If neither a 7-1/2 nor 15-minute series map has been published for your facility site, use a plant map or other appropriate map, and include all the requested information; in this case, briefly describe land uses in the map area (e.g., residential, commercial).
For information about obtaining maps, contact the U.S. Geological Survey at (888) 275-8747 or see the U.S. Geological Survey web site at http://www.usgs.gov/pubprod.
You may trace your map from a geological survey chart, or other map meeting the above specifications. If you do, your map should bear a note showing the number or title of the map or chart from which it was traced. Include the names of nearby towns, water bodies, and other prominent points.
(Go to Table
of Contents)
Item 11 – Facility Drawing
All existing facilities must include a drawing showing the general layout of the facility. This drawing should be approximately to scale and fit on an 8 ½” x 11” sheet of paper. The drawing should show the following:
The property boundaries of the facility;
The areas occupied by all storage, treatment, or disposal operations that will be used during interim status;
The name of each operation (e.g., multiple hearth incinerator, drum storage area, etc.);
Areas of past storage, treatment, or disposal operations;
Areas of future storage, treatment, or disposal operations; and
The approximate dimensions of the property boundaries and all storage, treatment, and disposal areas. (Where applicable, use the process codes listed in Items 7 and 8 to indicate the location of all storage, treatment, and disposal areas.)
NOTE
|
New facilities do not have to complete Item 11.
|
Item 12 – Photographs
All existing facilities must include photographs that clearly delineate all existing structures; all existing areas for storing, treating, or disposing of hazardous waste; and all known sites of future storage, treatment, or disposal operations. Photographs may be color or black and white, ground-level or aerial. Indicate the date the photograph was taken on the back of each photograph. Use the process codes listed in Items 7 and 8 to indicate the location of all storage, treatment, and disposal areas.
NOTE
|
New facilities do not have to complete Item 11.
|
Item 13 - Comments
(Go to Table
of Contents)
This page intentionally left blank
RCRA
Hazardous Waste
Part A Permit Application
OTHER REFERENCE INFORMATION
AND
CODE LISTS
Excluded Wastes
This
section presents a partial list of excluded materials and wastes.
This list includes materials excluded from the definition of solid
waste in 40 CFR 261.4(a) and solid wastes excluded from the
definition of hazardous waste in 40 CFR 261.4(b). In addition, it
also includes specific solid waste samples that are excluded from the
definition of hazardous waste in 40 CFR 261.4(d)-(f). Finally, this
list includes specific hazardous wastes, as described in 40 CFR
261.4(c), that are exempted from certain RCRA Subtitle C regulations.
Agricultural Waste Fertilizer §261.4(b)(2)
Analytical Samples §261.4(d)
Arsenic Treated Wood and Wood Products §261.4(b)(9)
Cement Kiln Dust §261.4(b)(8)
Coking By-products §261.4(a)(10)
Comparable/Syn gas Fuels §261.4(a)(16)
Domestic Sewage §261.4(a)(1)
Dredged Material §261.4(g)
Drilling Fluid §261.4(b)(5)
Excluded Scrap Metal Being Recycled §261.4(a)(13)
Exported Wastes §262.56
Fossil Fuel Emission Control Waste §261.4(b)(4)
Hazardous Secondary Material Generated and Reclaimed Under the Control of the Generator 40 CFR 261.2(a)(2)(ii)
Hazardous Secondary Material Transferred Off-site for Reclamation |
Household Waste §261.4(b)(1)(i)-(ii)
HTMR Condenser Residue §261.4(a)(11)
In situ Mining Materials §261.4(a)(5)
Irrigation Return Flows §261.4(a)(3)
Kraft Mill Steam Stripper Condensates §261.4(a)(15)
Leachate §261.4(b)(15)
Mining and Mineral Process Wastes §261.4(b)(7)
Mining Overburden §261.4(b)(3)
Nuclear Material §261.4(a)(4)
Oil Filters §261.4(b)(13)
Petrochemical Recovered Oil §261.4(a)(18)
Petroleum-contaminated Media and Debris §261.4(b)(10)
Petroleum Refining §261.4(a)(12)
Pulping Liquor §261.4(a)(6)
Refrigerants §261.4(b)(12)
|
Secondary Material Returned to Original Process §261.4(a)(8)
Secondary Material from Mineral Processing §261.4(a)(17)
Shredded Circuit Boards Being Recycled §261.4(a)(14)
Spent Caustics from Petroleum Refining §261.4(a)(19)
Spent Wood Preserving Solutions and Wastewaters §261.4(a)(9)
Sulfuric Acid §261.4(a)(7)
Treatability Study Samples §261.4(e)
Treatability Studies at Laboratories and Testing Facilities §261.4(f)
Trivalent Chromium Waste §261.4(b)(6)
Used Oil Distillation Bottoms §261.4(b)(14)
Wastes Generated in Storage Tanks, Transport Vehicles, Pipelines, or Manufacturing Process Units §261.4(c)
Wastewater Point Source Discharge §261.4(a)(2)
|
(Go to Table
of Contents)
Definitions
This section contains definitions of terms helpful for completing the form. For terms defined in the Code of Federal Regulations (CFR), the appropriate citation is provided.
Accumulation – A site that does not hold RCRA Interim Status or a RCRA permit may accumulate hazardous waste for a short period of time before shipping it off-site. The waste must be accumulated in either tanks or containers; it may not be accumulated in surface impoundments.
Generators of more than 1,000 kilograms (kg; 2,200 pounds [lbs]) of hazardous waste per month may accumulate their waste for up to 90 days before shipping it off-site. Generators of 100 kg (220 lbs) to 1,000 kg (2,200 lbs) of hazardous waste per month may accumulate their waste for up to 180 days before shipping it off-site. If the nearest treatment, storage, disposal, or recycling facility to which they can send their waste is more than 200 miles away, they may accumulate their waste for 270 days. See 40 CFR 262.34.
Act or RCRA – The Solid Waste Disposal Act, as amended by the Resource Conservation and Recovery Act of 1976, as amended by the Hazardous and Solid Waste Amendments of 1984, 42 U.S.C. Section 6901 et seq.
Acute Hazardous Waste – Any hazardous waste with an EPA hazardous waste code beginning with the letter “P” (40 CFR 261.33(e)) or any of the following “F” codes: F020, F021, F022, F023, F026, and F027 (40 CFR 261.31). These wastes are subject to stringent quantity standards for accumulation and generation (40 CFR 261.5(e)).
Authorized Representative – The person responsible for the overall operation of the site or an operational unit (i.e., part of a site), e.g., superintendent or plant manager, or person of equivalent responsibility.
Authorized State – A State that has obtained authorization from the EPA to direct its own RCRA program.
Boiler – An enclosed device using controlled flame combustion and having the following characteristics:
The unit has physical provisions for recovering and exporting energy in the form of steam, heated fluids, or heated gases;
The unit’s combustion chamber and primary energy recovery section(s) are of integral design (i.e., they are physically formed into one manufactured or assembled unit);
The unit continuously maintains an energy recovery efficiency of at least 60 percent, calculated in terms of the recovered energy compared with the thermal value of the fuel;
The unit exports and utilizes at least 75 percent of the recovered energy, calculated on an annual basis (excluding recovered heat used internally in the same unit, for example, to preheat fuel or combustion air or drive fans or feedwater pumps); or
The unit is one which the Regional Administrator has determined, on a case-by-case basis, to be a boiler, after considering the standards in 40 CFR 260.32.
(Go to Table of Contents)
By-product Material – A by-product material is (1) any radioactive material (except special nuclear material) yielded in or made radioactive by exposure to the radiation incident to the process of producing or utilizing special nuclear material; and (2) the tailings or wastes produced by the
extraction or concentration of uranium or thorium from any ore processed primarily for its source material content (defined in the Atomic Energy Act of 1954).
Code of Federal Regulations (CFR) – Codification of the general and permanent rules published in the Federal Register by the Executive departments and agencies of the Federal Government. The Code is divided into 50 titles which represent broad areas subject to Federal regulation. Each title is divided into chapters that usually bear the name of the issuing agency. Each chapter is further subdivided into parts covering specific regulatory areas. The CFR title applicable for the Hazardous Waste Report is “40,” as in “40 CFR 262.34.”
Conditionally Exempt Small Quantity Generator (CESQG) of Hazardous Waste is a generator who generates less than or equal to the following amounts in a calendar month:
(i) 100 kilograms (kg; 220 pounds [lbs]) of hazardous waste; and
(ii) 1 kg (2.2 lbs) of acute hazardous wastes listed in sections 261.31, or 261.33(e); and
(iii) 100 kg (220 lbs) of any residue or contaminated soil, waste, or other debris resulting from the cleanup of a spill, into or on any land or water, of any acute hazardous wastes listed in sections 261.31, or 261.33(e).
Confidential Business Information (CBI) – Information a facility does not wish to make available to the general public for competitive business reasons. Confidential Business Information (CBI) may be claimed for certain information in your submittal. A claim may be made in accordance with 40 CFR Part 2, Subpart B.
Delisted Waste – Site-specific wastes excluded from regulation under 40 CFR 260.20 and 260.22. A waste at a particular generating site may be excluded by petitioning the EPA Administrator for a regulatory amendment. These wastes are listed in Appendix IX of 40 CFR Part 261.
Disposal – The discharge, deposit, injection, dumping, spilling, leaking, or placing of any solid waste or hazardous waste into or on any land or water so that such solid waste or hazardous waste or any constituent thereof may enter the environment or be emitted into the air or discharged into any waters, including groundwaters.
Eligible Academic Entity – A college or university, or a non-profit research institute that is owned by or has a formal written affiliation with a college or university, or a teaching hospital that is owned by or has a formal written affiliation with a college or university pursuant to 40 CFR Part 262, Subpart K (See 40 CFR 262.200).
Environmental Protection Agency (EPA) – The EPA, also called U.S. EPA, means the U.S. Environmental Protection Agency. Some State environmental authorities may be called the EPA also, as in “Illinois EPA.”
(Go to Table of Contents)
EPA Identification (ID) Number – The number assigned by the EPA to each hazardous waste generator, hazardous waste transporter, and treatment, storage, or disposal facility; U.S. importer of hazardous waste; mixed waste (hazardous and radioactive) generator; recycler of hazardous waste; exempt boiler and/or industrial furnace burning or processing hazardous waste; large quantity handler of or destination facility for universal wastes; disposer of hazardous waste with an underground injection permit; used oil transporter, used oil processor/re-refiner, off-specification used oil fuel burner, used oil fuel marketer; eligible academic entity managing laboratory hazardous waste under Subpart K; or site undergoing corrective action. Additionally, facilities that must notify using the Site ID Form and Addendum to the Site Identification Form that they are managing hazardous secondary material will also be assigned an EPA Identification Number.
Excluded Wastes – Wastes excluded from the definition of solid or hazardous waste under 40 CFR 261.3 and 261.4. For a partial listing, see the “EXCLUDED WASTES” section of this booklet.
Hazardous Waste – A hazardous waste as defined in 40 CFR 261.3.
Hazardous Secondary Material (HSM) – A secondary material (e.g., spent material, by-product, or sludge) that, when discarded, would be identified as hazardous waste under 40 CFR Part 261. Facilities managing hazardous secondary material under 40 CFR 261.2(a)(2)(ii), 40 CFR 261.4(a)(23), (24), or (25) must complete the Addendum to the Site Identification Form: Notification for Managing Hazardous Secondary Material. You must check with your State to determine if you are eligible to manage hazardous secondary material under these exclusions (see also http://www.epa.gov/epawaste/hazard/dsw/statespf.htm).
Hazardous Waste Generator – Any person, by site, whose act or process produces hazardous waste identified or listed in 40 CFR Part 261.
Hazardous Waste Number or Code, EPA – The number (or code) assigned by the EPA to each hazardous waste listed in 40 CFR Part 261, Subpart D and to each characteristic identified in 40 CFR Part 261, Subpart C. The codes consist of one letter (D, F, P, U, or K) and three numbers. For a list of the EPA hazardous waste codes see the “EPA HAZARDOUS WASTE CODES” section of this booklet.
Hazardous Waste Number or Code, State – The number (or code) assigned by the State to each hazardous waste listed in the State regulations. Obtain a list of the States waste codes from your State.
Hazardous Waste Storage – The holding of hazardous waste for a temporary period, at the end of which the hazardous waste is treated, disposed of, or stored elsewhere.
Hazardous Waste Transfer Facility – Refer to “Transfer Facility” definition.
Hazardous Waste Transporter – Refer to “Transporter” definition.
Hazardous Waste Treatment – Any method, technique, or process, including neutralization, designed to change the physical, chemical, or biological character or composition of any hazardous waste so as to neutralize such hazardous waste, or so as to recover energy or material resources from the hazardous waste, or so as to render such hazardous waste nonhazardous, or less hazardous; safer to transport, store, or dispose of; or amenable for recovery, amenable for storage, or reduced in volume. Such term includes any activity or processing designed to change the physical form or composition of hazardous waste so as to render it nonhazardous.
(Go to Table of Contents)
Incineration – Burning of certain types of solid, liquid, or gaseous materials; or a treatment technology involving destruction of waste by controlled burning at high temperatures (e.g., burning sludge to remove the water and reduce the remaining residues to a safe, non-burnable ash that can be disposed safely on land, in some waters, or in underground locations).
Industrial Furnace – Any of the following enclosed devices that are integral components of manufacturing processes and that use thermal treatment to accomplish recovery of materials or energy: cement kilns; lime kilns; aggregate kilns; phosphate kilns; coke ovens; blast furnaces; smelting, melting, and refining furnaces; titanium dioxide chloride process oxidation reactors; methane reforming furnaces; pulping liquor recovery furnaces; combustion devices used in the recovery of sulfur values from spent sulfuric acid; halogen acid furnaces, as defined under industrial furnace in 40 CFR 260.10; and such other devices as the Administrator may add to this list.
Interim (Permit) Status – Period during which the owner/operator of an existing TSD facility is treated as having been issued a RCRA permit even though he/she has not yet received a final determination. An existing facility should have automatically qualified for interim status if the owner/operator filed both timely “notification” and the first part (Part A) of the RCRA permit application. Interim status continues until a final determination is made to issue or deny the permit. Owner/operator of new facilities cannot by definition qualify for interim status; rather, they need a RCRA permit prior to beginning construction of a hazardous waste management facility.
Large Quantity Generator (LQG) of Hazardous Waste –is a generator who generates any of the following amounts in a calendar month:
(i) Greater than or equal to 1,000 kilograms (kg; 2,200 pounds [lbs]) or more of hazardous waste; or
(ii) Greater than 1 kg (2.2 lbs) of any acute hazardous wastes listed in §§ 261.31 or 261.33 (e); or
(iii) Greater than 100 kg (220 lbs) of any residue or contaminated soil, waste, or other debris resulting from the cleanup of a spill, into or on any land or water, of any acute hazardous wastes listed in sections 261.31 or 261.33(e).
Large Quantity Handler of Universal Waste (LQHUW) – A universal waste handler (as defined in 40 CFR 273.9) who accumulates 5,000 kilograms (kg) or more total of universal wastes (batteries, pesticides, mercury-containing equipment, or lamps – calculated collectively) at any time. This designation is retained through the end of the calendar year in which the 5,000 kg limit is met or exceeded.
Management, or Hazardous Waste Management – Systematic control of the collection, source separation, storage, transportation, processing, treatment, recovery, or disposal of hazardous waste (40 CFR 260.10).
Manifest, Uniform Hazardous Waste – The shipment document EPA Form 8700-22 and, if necessary, Form 8700-22A, originated and signed by a generator in accordance with the instructions included in the Appendix to 40 CFR Part 262. The “cradle-to-grave” paperwork must accompany a shipment of hazardous waste as it moves from the generator to the transporter and eventually to the hazardous waste management facility.
Mixed Waste – Waste that contains both hazardous and source, special nuclear, or by-product material subject to the Atomic Energy Act (AEA), RCRA section 1004(41), 42 U.S.C. 6903 (63 FR 17414; April 9, 1998).
(Go to Table of Contents)
Municipality – A city, village, town, borough, county, parish, district, association, Indian tribe or authorized Indian tribal organization, designated and approved management agency under Section 208 of the Clean Water Act, or any other public body created by or under State law and having jurisdiction over disposal of sewage, industrial wastes, or other wastes.
Off-site Facility – A hazardous waste treatment, storage, disposal, or recycling area located at a place away from the generating site.
Off-Specification Used Oil Burner – A site where used oil not meeting the specification requirements in 40 CFR 279.11 (off-specification used oil) is burned for energy recovery in devices identified in Section 279.61(a).
Off-Specification Used Oil Fuel – Used oil fuel that does not meet the specification provided under 40 CFR 279.11.
On-site Facility – A hazardous waste treatment, storage, disposal, or recycling area located on the generating site.
On-Specification Used Oil Fuel – Used oil fuel that meets the specification provided under 40 CFR 279.11.
Operator – The person responsible for the overall operation of a RCRA site. Note: This is the legal entity which controls the RCRA site operation rather than the plant or site manager. This is usually a company or business name, not an individual. See Person.
Owner – The person who owns a RCRA site or part of a RCRA site. Note: This includes the owner(s) of the building(s) and/or land. This may be an individual, company, or business name. See Person.
Person – An individual, trust, firm, joint stock company, Federal Agency, corporation (including a government corporation), partnership, association, State, municipality, commission, political subdivision of a State, or any interstate body.
Resource Conservation and Recovery Act (RCRA) – The Solid Waste Disposal Act as amended by the Resource Conservation and Recovery Act (RCRA) (40 CFR 270.2). It is the Federal statute that regulates the generation, treatment, storage, disposal, recycling, and/or transportation of solid and hazardous waste.
RCRA Interim (Permit) Status – Refer to “Interim (Permit) Status” definition.
RCRA Permit – A complete RCRA permit is comprised of an operating permit for hazardous waste treatment, storage, and disposal, and a corrective action permit addressing releases from solid waste management unit (SWMUs). To apply for a permit, a site must file a two-part application (Part A and Part B). A facility is not considered to have a complete RCRA permit until both parts have been issued.
(Go to Table of Contents)
RCRA Subtitle C Site (RCRA Site or Site) – The physical plant or location at which one or more of the following regulated waste activities occurs: the generation, transportation, treatment, storage, or disposal of hazardous wastes; recycling of hazardous wastes; U.S. importer of hazardous waste; mixed waste (hazardous and radioactive) generator; exempt boiler and/or industrial furnace burning or processing hazardous waste; large quantity handler of or destination facility for universal wastes; disposing hazardous waste with an underground injection permit; the transportation (and temporary storage during transportation), processing/re-refining, burning, or marketing of used oil; eligible academic entity managing laboratory hazardous waste under Subpart K; facility managing hazardous secondary material being reclaimed that must comply with certain requirements and conditions; or undergoing corrective action.
A site may consist of several treatment, storage, or disposal operational units. For entities that only transport regulated wastes, the term site refers to the headquarters of that entity’s operations.
Recycling – Use, reuse, or reclamation of a material (40 CFR 261.1(c)(7)). “Reclamation” is the processing or regeneration of a material to recover a usable product (e.g., recovery of lead values from spent batteries, regeneration of spent solvents) (40 CFR 261.1(c)(4)). A material is “used or reused” if it is either: (1) employed as an ingredient (including use as an intermediate) in an industrial process to make a product (e.g., distillation bottoms from one process used as feedstock in another process) (40 CFR 261.1(c)(5)). However, a material will not satisfy this condition if distinct components of the material are recovered as separate end products (as when metals are recovered from metal-containing secondary material); or (2) a commercial product (e.g., spent pickle liquor used as phosphorous precipitant and sludge conditioner in wastewater treatment).
Small Quantity Generator (SQG) of Hazardous Waste – is a generator if the site meets all of the following criteria:
Generates, in any calendar month, more than 100 kilograms (kg; 220 pounds [lbs]) but less than 1,000 kg (2,200 lbs) of RCRA hazardous waste; and
Does not generate, in any calendar month, more than 1 kg (2.2 lbs) of acute hazardous waste listed in sections261.31 or 261.33(e); and
Does not generate more than 100 kg (220 lbs) of material from the cleanup of any residue or contaminated soil, waste, or other debris resulting from the cleanup of a spill, into or on any land or water, of any acute hazardous wastes listed in sections 261.31 or 261.33(e).
Small Quantity On-site Burner Exemption – The persons who burn small quantity of hazardous waste in an on-site boiler or industrial furnace, in accordance with 40 CFR 266.108, are conditionally exempt from regulation for that activity.
Smelting, Melting, and Refining Furnace Exemption – Under 40 CFR 266.100(c), owners or operators of smelting, melting, and refining furnaces that process hazardous wastes solely for metals recovery are conditionally exempt from regulation, except for 40 CFR 266.101 and 266.112, provided they comply with limited requirements set forth in Section 266.100(c). Similarly, 40 CFR 266.100(f) provides that owners or operators of smelting, melting, and refining furnaces that process hazardous wastes for the recovery of precious metals are conditionally exempt from regulation, except for 40 CFR 266.112, provided they comply with limited requirements specified in Section 266.100(f).
(Go to Table of Contents)
Solid Waste – Any garbage, refuse, or sludge, or other materials not excluded under 40 CFR 261.4(a). Exclusions include, for example, domestic sewage and any mixture of other wastes that pass through a sewer system to a publicly owned treatment works (POTWs); industrial wastewater discharges that are point source discharges subject to regulation under the Clean Water Act; irrigation return flows; nuclear materials defined by the Atomic Energy Act; and in situ mining materials (see the “EXCLUDED WASTES” section of this booklet). Wastewaters being collected, stored, or treated before discharge and sludges generated by wastewater treatment are not excluded. The EPA defines hazardous waste as a subset of solid waste.
Source Material – As defined by the Atomic Energy Act of 1954: (1) Uranium, thorium, or any other material determined by the Nuclear Regulatory Commission pursuant to the provisions of Section 2091 of this title to be source material; or (2) ores containing one or more of the foregoing materials in such concentration as the Commission may by regulation determine from time to time.
Special Nuclear Material – As defined by the Atomic Energy Act of 1954: (1) plutonium, uranium enriched in the isotope 233 or in the isotope 235, and any other material which the Nuclear Regulatory Commission, pursuant to the provisions of Section 2071 of this title, determines to be special nuclear material, but does not include source material; or (2) any material artificially enriched by any of the foregoing, but does not include source material.
Subpart K – An alternative set of generator requirements for managing laboratory hazardous waste at eligible academic entities. Generators that are eligible academic entities with laboratories may elect to opt into 40 CFR 262 Subpart K and manage their laboratory hazardous waste under Subpart K in lieu of 40 CFR 262.34(c) (or 40 CFR 261.5 for CESQGs). In order for eligible academic entities (see definition) to opt into Subpart K or subsequently withdraw from Subpart K, they must use the Site ID Form to notify the appropriate State or EPA Regional Office. Refer to 40 CFR 262.203 and 262.204. Note: You must check with your State to determine if you are eligible to manage laboratory hazardous waste pursuant to 40 CFR Part 262 Subpart K and for any State-specific requirements.
Tolling – Tolling arrangements describe a particular type of recycling contract between two companies. Specifically, the “tolling” company certifies that it has a contract with a manufacturer to produce a product, and that manufacturing process generates a residual material that can be recycled by the tolling company. If the tolling company certifies that the contract specifies that the tolling company owns and has responsibility for the recyclable material once it is generated, and the material is returned to the tolling company for reclamation, and subsequently recycled, the material is excluded from regulation (under 40 CFR 261.2(a)(2)(ii) or 261.4(a)(23)), provided certain requirements are met.
Transfer Facility – Any transportation-related facility including loading docks, parking areas, storage areas, and other similar areas where shipments of hazardous waste are held for 10 days or less during the normal course of transportation (40 CFR 260.10 and 40 CFR 263.12).
Transporter – A person engaged in the off-site transportation of hazardous waste by air, rail, highway, or water.
(Go to Table of Contents)
Underground Injection Control – The subsurface emplacement of fluids through a bored, drilled or driven well; or through a dug well, where the depth of the dug well is greater than the largest surface dimension. Underground injection wells are regulated under both the Safe Drinking Water Act and the Resource Conservation and Recovery Act (see 40 CFR Part 148).
United States Importer – Any person who imports hazardous waste from a foreign country into the U.S. This does not include hazardous waste shipped from a foreign Department of Defense site, Maquiladora, U.S. territory or protectorate.
Universal Waste – Any of the following hazardous wastes that are managed under the universal waste requirements of 40 CFR Part 273: batteries, pesticides, mercury-containing equipment, and lamps. Some States may have State-specific universal wastes defined as well.
Used Oil – Any oil that has been refined from crude oil, or any synthetic oil, that has been used, and as a result of such use, is contaminated by physical or chemical impurities.
Used Oil Fuel Marketer – Any person who conducts either of the following activities:
Directs a shipment of off-specification used oil from their site to an off-specification used oil burner; or
First claims that used oil that is to be burned for energy recovery meets the used oil fuel specifications set forth in 40 CFR 279.11.
Used Oil Management Activities – For the purposes of the Site ID Form, includes used oil transportation; used oil processing and re-refining; burning off-specification used oil fuel; and used oil fuel marketing.
Used Oil Processing – Chemical or physical operations designed to produce from used oil, or to make used oil more amenable for production of, fuel oils, lubricants, or other used oil-derived products. Processing includes, but is not limited to: blending used oil with virgin petroleum products, blending used oils to meet the fuel specification, filtration, simple distillation, chemical or physical separation, and re-refining.
Used Oil Processor – A site that processes on-specification or off-specification used oil.
Used Oil Re-Refiner – A site that produces lubricating oils and greases, industrial fuel, asphalt extender, gasoline, and other products from on-specification or off-specification used oil.
Used Oil Transfer Facility – Any transportation-related facility, including loading docks, parking areas, storage areas, and other areas where shipments of used oil are held for more than 24 hours during the normal course of transportation and not longer than 35 days. Transfer facilities that store used oil for more than 35 days are subject to regulation under 40 CFR Part 279, Subpart F.
(Go to Table of Contents)
Used Oil Transporter – Any person who transports used oil, any person who collects used oil from more than one generator and transports the collected oil, and owners and operators of used oil transfer facilities. Used oil transporters may consolidate or aggregate loads of used oil for purposes of transportation but, with the following exception, may not process used oil. Used oil transporters may conduct incidental processing operations that occur in the normal course of used oil transportation (e.g., settling and water separation), but that are not designed to produce (or make more amenable for production of) used oil-derived products or used oil fuel.
EPA Hazardous Waste Codes
A list of all the hazardous waste codes is shown below. See the regulations for details.
CHARACTERISTICS OF HAZARDOUS WASTE (SEE 40 CFR 261.24) – DXXX
HAZARDOUS WASTE FROM NON-SPECIFIC SOURCES (SEE 40 CFR 261.31) – FXXX
HAZARDOUS WASTE FROM SPECIFIC SOURCES (SEE 40 CFR 261.32) - KXXX |
DISCARDED COMMERCIAL CHEMICAL PRODUCTS, OFF-SPECIFICATION SPECIES, CONTAINER RESIDUALS, AND SPILL RESIDUES THEREOF – ACUTE HAZARDOUS WASTE (SEE 40 CFR 261.33) – PXXX
DISCARDED COMMERCIAL CHEMICAL PRODUCTS, OFF-SPECIFICATION SPECIES, CONTAINER RESIDUES, AND SPILL RESIDUES THEREOF – TOXIC WASTES (SEE 40 CFR 261.33) – UXXX
|
||||||||||||
D001 D002 D003 D004 D005 D006 D007 D008 D009 D010 D011 D012 D013 D014 D015 D016 D017 D018 D019 D020 D021 D022 D023 D024 D025 D026 D027 D028 D029 D030 D031 D032 D033 D034 D035 D036 D037 D038 D039 D040 D041 D042 D043
|
F001 F002 F003 F004 F005 F006 F007 F008 F009 F010 F011 F012 F019 F020 F021 F022 F023 F024 F025 F026 F027 F028 F032 F034 F035 F037 F038 F039 |
K001 K002 K003 K004 K005 K006 K007 K008 K009 K010 K011 K013 K014 K015 K016 K017 K018 K019 K020 K021 K022 K023 K024 K025 K026 K027 K028 K029 K030 K031 K032 K033 K034 K035 K036 K037 K038 K039 K040 K041 K042 K043 K044 K045 K046 |
K047 K048 K049 K050 K051 K052 K060 K061 K062 K069 K071 K073 K083 K084 K085 K086 K087 K088 K093 K094 K095 K096 K097 K098 K099 K100 K100 K101 K102 K103 K104 K105 K106 K107 K108 K109 K110 K111 K112 K113 K114 K115 K116 K117 K118 |
K123 K124 K125 K126 K131 K132 K136 K141 K142 K143 K144 K145 K147 K148 K149 K150 K151 K156 K157 K158 K159 K161 K169 K170 K171 K172 K174 K175 K176 K177 K178 K181 |
P001 P002 P003 P004 P005 P006 P007 P008 P009 P010 P011 P012 P013 P014 P015 P016 P017 P018 P020 P021 P022 P023 P024 P026 P027 P028 P029 P030 P031 P033 P034 P036 P037 P038 P039 P040 P041 P042 P043 P044 P045 P046 P047 P048 P049 |
P050 P051 P054 P056 P057 P058 P059 P060 P062 P063 P064 P065 P066 P067 P068 P069 P070 P071 P072 P073 P074 P075 P076 P077 P078 P081 P082 P084 P085 P087 P088 P089 P092 P093 P094 P095 P096 P097 P098 P099 P101 P102 P103 P104 P105 |
P106 P108 P109 P110 P111 P112 P113 P114 P115 P116 P118 P119 P120 P121 P122 P123 P127 P128 P185 P188 P189 P190 P191 P192 P194 P196 P197 P198 P199 P201 P202 P203 P204 P205 |
U001 U002 U003 U004 U005 U006 U007 U008 U009 U010 U011 U012 U014 U015 U016 U017 U018 U019 U020 U021 U022 U023 U024 U025 U026 U027 U028 U029 U030 U031 U032 U033 U034 U035 U036 U037 U038 U039 U041 U042 U043 U044 U045 U046 U047 |
U048 U049 U050 U051 U052 U053 U055 U056 U057 U058 U059 U060 U061 U062 U063 U064 U066 U067 U068 U069 U070 U071 U072 U073 U074 U075 U076 U077 U078 U079 U080 U081 U082 U083 U084 U085 U086 U087 U088 U089 U090 U091 U092 U093 U094 |
U095 U096 U097 U098 U099 U101 U102 U103 U105 U106 U107 U108 U109 U110 U111 U112 U113 U114 U115 U116 U117 U118 U119 U120 U121 U122 U123 U124 U125 U126 U127 U128 U129 U130 U131 U132 U133 U134 U135 U136 U137 U138 U140 U141 U142 |
U143 U144 U145 U146 U147 U148 U149 U150 U151 U152 U153 U154 U155 U156 U157 U158 U159 U160 U161 U162 U163 U164 U165 U166 U167 U168 U169 U170 U171 U172 U173 U174 U176 U177 U178 U179 U180 U181 U182 U183 U184 U185 U186 U187 U188 |
U189 U190 U191 U192 U193 U194 U196 U197 U200 U201 U202 U203 U204 U205 U206 U207 U208 U209 U210 U211 U213 U214 U215 U216 U217 U218 U219 U220 U221 U222 U223 U225 U226 U227 U228 U234 U235 U236 U237 U238 U239 U240 U243 U244 U246 |
U247 U248 U249 U271 U278 U279 U280 U328 U353 U359 U364 U367 U372 U373 U387 U389 U394 U395 U404 U409 U410 U411 |
(Go to Table
of Contents)
Hazardous Secondary Material (HSM) Facility Codes
Facility codes describe the specific regulation a facility uses to manage its hazardous secondary material (HSM) and the type of activity the facility performs under the regulation (e.g., generator, reclaimer). Review the groups and pick the appropriate code. If more than one facility code applies to you, enter each code on a separate row under Item 2 of the Addendum to the Site Identification Form.
Under Control of the Generator Exclusion (40 CFR 261.2(a)(2)(ii) or 261.4(a)(23)) |
|
Code |
Facility Code Description |
01 |
HSM Generator reclaiming HSM “on-site”: This code applies if you generate and reclaim hazardous secondary material at your generating facility. See also paragraph (1) in the Federal definition of “Hazardous secondary material generated and reclaimed under the control of the generator” in 40 CFR Part 260.10. |
02 |
HSM Generator transferring HSM to reclaimer within the “same company”: This code applies if you generate hazardous secondary material and send the material for reclamation to a different facility that is either controlled by you or controlled by the same person that controls your generating facility. See also paragraph (2) in the Federal definition of “Hazardous secondary material generated and reclaimed under the control of the generator” in 40 CFR Part 260.10. |
03 |
Reclaimer receiving HSM from HSM generator within the “same company”: This code applies if you receive and reclaim hazardous secondary material from a different facility that either controls you or is controlled by the same person that controls you. See also paragraph (2) in the Federal definition of “Hazardous secondary material generated and reclaimed under the control of the generator” in 40 CFR Part 260.10. |
04 |
Tolling Contractor reclaiming HSM pursuant to a tolling contract: This code applies if you are a tolling contractor that reclaims hazardous secondary material pursuant to a written contract with a toll manufacturer. See also paragraph (3) in the Federal definition of “Hazardous secondary material generated and reclaimed under the control of the generator” in 40 CFR Part 260.10. |
05 |
Toll Manufacturer managing HSM pursuant to a tolling contract: This code applies if you generate and send hazardous secondary material for reclamation to a tolling contractor pursuant to a written contract. See also paragraph (3) in the Federal definition of “Hazardous secondary material generated and reclaimed under the control of the generator” in 40 CFR Part 260.10. |
Transfer-based Exclusion (40 CFR 261.4(a)(24)) |
|
Code |
Facility Code Description |
06 |
HSM Generator transferring HSM off-site to a domestic reclamation facility: This code applies if you generate and send hazardous secondary material for reclamation to an off-site domestic reclamation facility. |
07 |
Reclaimer receiving HSM from off-site: This code applies if you reclaim hazardous secondary material received from an off-site domestic hazardous secondary material generator or other domestic facility. |
08 |
Intermediate facility: This code applies if you receive hazardous secondary material from an off-site domestic hazardous secondary material generator or another domestic facility and you store it for more than ten days. This code does not apply if you generate or reclaim the hazardous secondary material. |
Imports/Exports (40 CFR 261.4(a)(24) or (25)) |
|
Code |
Facility Code Description |
09 |
HSM Generator exporting HSM off-site to a foreign reclamation facility: This code applies if you generate and export hazardous secondary material for reclamation to a foreign reclamation facility. |
10 |
HSM Generator importing HSM from a foreign entity to send to another domestic reclamation facility: This code applies if you import hazardous secondary material from a foreign entity and send the material for reclamation to a domestic reclamation facility. |
11 |
HSM Generator AND Reclaimer of imported HSM: This code applies if you import hazardous secondary material from a foreign entity and reclaim the material at your facility. |
(Go to Table
of Contents)
Hazardous Secondary Material (HSM) Land-Based Unit Codes
A 2-digit code that best describes the land-based unit you use or will use to manage the hazardous secondary material.
Code |
Land-based Unit Code Description |
NA |
Do not use land-based units to manage hazardous secondary material. |
SI |
Use surface impoundment(s) to manage hazardous secondary material. A surface impoundment is a natural topographic depression, man-made excavation or diked area formed primarily of earthen materials (although it may be lined with man-made materials), which is designed to hold an accumulation of liquid hazardous secondary materials or materials containing free liquids and which is not an injection well. |
PL |
Use pile(s) to manage hazardous secondary material. Pile means any non-containerized accumulation of solid, non-flowing hazardous secondary material that is used for storage and is not a containment building. |
OT |
Use other land-based unit(s) to manage hazardous secondary material. |
(Go to Table
of Contents)
This page intentionally left blank
OMB# 2050-0024; Expires mm/dd/yyyy
SEND
COMPLETED The Appropriate State or Regional Office. |
United States Environmental Protection Agency RCRA SUBTITLE C SITE IDENTIFICATION FORM |
|
|
||||||||||||||||||||||||||||||||||||
MARK ALL BOX(ES) THAT APPLY |
Reason for Submittal:
|
|
|||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||
|
Name: |
|
|||||||||||||||||||||||||||||||||||||
|
Street Address: |
|
|||||||||||||||||||||||||||||||||||||
City, Town, or Village: |
County: |
|
|||||||||||||||||||||||||||||||||||||
State: |
Country: |
Zip Code: |
|
||||||||||||||||||||||||||||||||||||
|
Private |
|
District |
|
Tribal |
Municipal |
State |
Other |
|||||||||||||||||||||||||||||||
(at least 5-digit codes) |
|
|
|
||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||
|
Street or P.O. Box: |
|
|||||||||||||||||||||||||||||||||||||
City, Town, or Village: |
|
||||||||||||||||||||||||||||||||||||||
State: |
Country: |
Zip Code: |
|
||||||||||||||||||||||||||||||||||||
|
First Name: |
MI: |
Last: |
|
|||||||||||||||||||||||||||||||||||
Title: |
|
||||||||||||||||||||||||||||||||||||||
Street or P.O. Box: |
|
||||||||||||||||||||||||||||||||||||||
City, Town or Village: |
|
||||||||||||||||||||||||||||||||||||||
State: |
Country: |
Zip Code: |
|
||||||||||||||||||||||||||||||||||||
Email: |
|
||||||||||||||||||||||||||||||||||||||
Phone: |
Ext.: |
Fax: |
|
||||||||||||||||||||||||||||||||||||
|
A. Name of Site’s Legal Owner: |
Date Became Owner: |
|
||||||||||||||||||||||||||||||||||||
Owner Type: |
Private |
County |
District |
Federal |
Tribal |
Municipal |
State |
Other |
|
||||||||||||||||||||||||||||||
Street or P.O. Box: |
|
||||||||||||||||||||||||||||||||||||||
City, Town, or Village: |
Phone: |
|
|||||||||||||||||||||||||||||||||||||
State: |
Country: |
Zip Code: |
|
||||||||||||||||||||||||||||||||||||
B. Name of Site’s Operator: |
Date Became Operator: |
|
|||||||||||||||||||||||||||||||||||||
Operator Type: |
Private |
County |
District |
Federal |
Tribal |
Municipal |
State |
Other |
|
||||||||||||||||||||||||||||||
EPA Form 8700-12, 8700-13 A/B, 8700-23 Page 1 of
|
OMB#: 2050-0024; Expires mm/dd/yyyy
|
||||||||||||||||||||||||||
Mark “Yes” or “No” for all current activities (as of the date submitting the form); complete any additional boxes as instructed. |
|||||||||||||||||||||||||||
A. Hazardous Waste Activities; Complete all parts 1-10. |
|||||||||||||||||||||||||||
|
1. Generator of Hazardous Waste If “Yes,” mark only one of the following – a, b, or c. |
|
5. Transporter of Hazardous Waste If “Yes,” mark all that apply. |
||||||||||||||||||||||||
|
|
a. LQG: |
Generates, in any calendar month, 1,000 kg/mo (2,200 lbs/mo.) or more of hazardous waste; or Generates, in any calendar month, or accumulates at any time, more than 1 kg/mo (2.2 lbs/mo) of acute hazardous waste; or Generates, in any calendar month, or accumulates at any time, more than 100 kg/mo (220 lbs/mo) of acute hazardous spill cleanup material. |
|
|
a. Transporter |
|||||||||||||||||||||
|
|
|
b. Transfer Facility (at your site) |
||||||||||||||||||||||||
|
|
|
6. Treater, Storer, or Disposer of Hazardous Waste Note: A hazardous waste Part B permit is required for these activities. |
||||||||||||||||||||||||
|
|
|
7. Recycler of Hazardous Waste |
||||||||||||||||||||||||
|
|
b. SQG: |
100 to 1,000 kg/mo (220 – 2,200 lbs/mo) of non‑acute hazardous waste. |
|
|
||||||||||||||||||||||
|
|
c. CESQG: |
Less than 100 kg/mo (220 lbs/mo) of non-acute hazardous waste. |
|
If “Yes,” mark all that apply. |
||||||||||||||||||||||
If “Yes” above, indicate other generator activities in 2-4. |
|
|
a. a. Small Quantity On-site Burner Exemption |
||||||||||||||||||||||||
|
2. Short-Term Generator (generate from a short-term or one-time event and not from on-going processes). If “Yes,” provide an explanation in the Comments section. |
|
|
b. Smelting, Melting, and Refining Furnace Exemption |
|||||||||||||||||||||||
|
3. United States Importer of Hazardous Waste |
|
9. Underground Injection Control |
||||||||||||||||||||||||
|
4. Mixed Waste (hazardous and radioactive) Generator |
|
10. Receives Hazardous Waste from Off-site |
||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
B. Universal Waste Activities; Complete all parts 1-2. |
C. Used Oil Activities; Complete all parts 1-4. |
||||||||||||||||||||||||||
|
1. Large Quantity Handler of Universal Waste (you accumulate 5,000 kg or more) [refer to your State regulations to determine what is regulated]. Indicate types of universal waste managed at your site. If “Yes,” mark all that apply. |
|
If “Yes,” mark all that apply. |
||||||||||||||||||||||||
|
|
a. Transporter |
|||||||||||||||||||||||||
|
|
b. Transfer Facility (at your site) |
|||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||
|
If “Yes,” mark all that apply. |
||||||||||||||||||||||||||
|
|
a. Processor |
|||||||||||||||||||||||||
|
|
b. Re-refiner |
|||||||||||||||||||||||||
|
3. Off-Specification Used Oil Burner |
||||||||||||||||||||||||||
|
If “Yes,” mark all that apply. |
||||||||||||||||||||||||||
|
2. Destination Facility for Universal Waste Note: A hazardous waste permit may be required for this activity. |
|
|
a. Marketer
Who Directs Shipment of |
|||||||||||||||||||||||
|
|
b. Marketer Who First Claims the Used Oil Meets the Specifications |
|||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
EPA Form 8700-12, 8700-13 A/B, 8700-23 Page 2 of
|
OMB#: 2050-0024; Expires mm/dd/yyyy
|
||||||||||||||||||||||||
|
|||||||||||||||||||||||||
|
See the item-by-item instructions for definitions of types of eligible academic entities. Mark all that apply: |
||||||||||||||||||||||||
|
|
a. College or University b. Teaching Hospital that is owned by or has a formal written affiliation agreement with a college or university c. Non-profit Institute that is owned by or has a formal written affiliation agreement with a college or university |
|||||||||||||||||||||||
|
2. Withdrawing from 40 CFR Part 262 Subpart K for the management of hazardous wastes in laboratories |
||||||||||||||||||||||||
11. Description of Hazardous Waste |
|||||||||||||||||||||||||
A. Waste Codes for Federally Regulated Hazardous Wastes. Please list the waste codes of the Federal hazardous wastes handled at your site. List them in the order they are presented in the regulations (e.g., D001, D003, F007, U112). Use an additional page if more spaces are needed. |
|||||||||||||||||||||||||
|
|
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|
|
|||||||||||||||||||
B. Waste Codes for State-Regulated (i.e., non-Federal) Hazardous Wastes. Please list the waste codes of the State-Regulated hazardous wastes handled at your site. List them in the order they are presented in the regulations. Use an additional page if more spaces are needed. |
|||||||||||||||||||||||||
|
|
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|
|
|||||||||||||||||||
EPA Form 8700-12, 8700-13 A/B, 8700-23 Page 3 of
|
OMB#: 2050-0024; Expires mm/dd/yyyy
|
|||||||||||||||||||
12. Notification of Hazardous Secondary Material (HSM) Activity |
||||||||||||||||||||
|
Are you notifying under 40 CFR 260.42 that you will begin managing, are managing, or will stop managing hazardous secondary material under 40 CFR 261.2(a)(2)(ii), 40 CFR 261.4(a)(23), (24), or (25)? If “Yes,” you must fill out the Addendum to the Site Identification Form: Notification for Managing Hazardous Secondary Material. |
|||||||||||||||||||
13. Comments |
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
DRAFT |
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
14. Certification. I certify under penalty of law that this document and all attachments were prepared under my direction or supervision in accordance with a system designed to assure that qualified personnel properly gather and evaluate the information submitted. Based on my inquiry of the person or persons who manage the system, or those persons directly responsible for gathering the information, the information submitted is, to the best of my knowledge and belief, true, accurate, and complete. I am aware that there are significant penalties for submitting false information, including the possibility of fines and imprisonment for knowing violations. For the RCRA Hazardous Waste Part A Permit Application, all owner(s) and operator(s) must sign (see 40 CFR 270.10(b) and 270.11). |
||||||||||||||||||||
Signature of legal owner, operator, or an authorized representative |
Name and Official Title (type or print) |
Date Signed (mm/dd/yyyy) |
||||||||||||||||||
|
|
|
||||||||||||||||||
|
|
|
||||||||||||||||||
|
|
|
||||||||||||||||||
|
|
|
||||||||||||||||||
EPA Form 8700-12, 8700-13 A/B, 8700-23 Page 4 of
|
OMB#: 2050-0024; Expires mm/dd/yyyy
|
||||||||||||||||||||||
ADDENDUM TO THE SITE IDENTIFICATION FORM: NOTIFICATION OF HAZARDOUS SECONDARY MATERIAL ACTIVITY |
|
||||||||||||||||||||||
ONLY fill out this form if:
|
|||||||||||||||||||||||
Facility will begin managing excluded HSM as of _____________ (mm/dd/yyyy).
Facility is still managing excluded HSM/re-notifying as required by March 1 of each even-numbered year.
Facility has stopped managing excluded HSM as of ____________ (mm/dd/yyyy) and is notifying as required. |
|||||||||||||||||||||||
2. Description of excluded HSM activity. Please list the appropriate codes and quantities in short tons to describe your excluded HSM activity ONLY (do not include any information regarding your hazardous wastes). Use additional pages if more space is needed. |
|||||||||||||||||||||||
(answer using codes listed in the Code List section of the instructions) |
b. Waste code(s) for HSM |
c. Estimated short tons of excluded HSM to be managed annually |
d. Actual short tons of excluded HSM that was managed during the most recent odd-numbered year |
e. Land-based unit code (answer using codes listed in the Code List section of the instructions) |
|||||||||||||||||||
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|||||||||||||||||||
3. Facility has financial assurance pursuant to 40 CFR 261.4(a)(24)(vi). (Financial assurance is required for reclaimers and intermediate facilities managing excluded HSM under 40 CFR 261.4(a)(24) and (25)) |
|||||||||||||||||||||||
|
Does this facility have financial assurance pursuant to 40 CFR 261.4(a)(24)(vi)? |
||||||||||||||||||||||
EPA Form 8700-12, 8700-13 A/B, 8700-23 Addendum Page of
This page intentionally left blank
| File Type | application/vnd.openxmlformats-officedocument.wordprocessingml.document |
| Author | brendas |
| File Modified | 0000-00-00 |
| File Created | 2021-01-26 |
© 2024 OMB.report | Privacy Policy