NSPS for Metal Coil Surface Coating (40 CFR part 60, subpart TT) (Renewal)

ICR 201502-2060-007

OMB: 2060-0107

Federal Form Document

Forms and Documents
Document
Name
Status
Supporting Statement A
2015-02-18
IC Document Collections
ICR Details
2060-0107 201502-2060-007
Active 201112-2060-015
EPA/OAR 0660.12
NSPS for Metal Coil Surface Coating (40 CFR part 60, subpart TT) (Renewal)
Extension without change of a currently approved collection   No
Regular
Approved without change 11/18/2015
Retrieve Notice of Action (NOA) 02/25/2015
In accordance with 5 CFR 1320, the information collection is approved for three years.
  Inventory as of this Action Requested Previously Approved
11/30/2018 36 Months From Approved 11/30/2015
379 0 379
15,643 0 15,643
331,800 0 331,800

The New Source Performance Standards (NSPS) for Metal Coil Surface Coating (40 CFR Part 60, Subpart TT) were: proposed on January 5, 1981; promulgated on November 1, 1982; and amended on June 24, 1986 and October 17, 2000. These regulations apply to the following surface coating lines in the metal coil surface coating industry: each prime coat operation; each finish coat operation; and each prime and finish coat operation cured simultaneously, where the finish coat is applied wet-on-wet over the prime coat. These regulations apply to facilities commencing construction, modification, or reconstruction after the date of proposal. This information is being collected to assure compliance with 40 CFR Part 60, Subpart TT. In general, all NSPS standards require initial notification reports, performance tests, and periodic reports by the owners/operators of the affected facilities. They are also required to maintain records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility, or any period during which the monitoring system is inoperative. These notifications, reports, and records are essential in determining compliance, and are required of all affected facilities subject to NSPS. Any owner/operator subject to the provisions of this part shall maintain a file of these measurements, and retain the file for at least two years following the date of such measurements, maintenance reports, and records. All reports are sent to the delegated state or local authority. In the event that there is no such delegated authority, the reports are sent directly to the U.S. Environmental Protection Agency (EPA) regional office.

US Code: 42 USC 7401 et seq Name of Law: Clean Air Act
  
None

Not associated with rulemaking

  79 FR 30117 05/27/2014
80 FR 10086 02/25/2015
No

1
IC Title Form No. Form Name
NSPS for Metal Coil Surface Coating (40 CFR Part 60, Subpart TT) (Renewal)

  Total Approved Previously Approved Change Due to New Statute Change Due to Agency Discretion Change Due to Adjustment in Estimate Change Due to Potential Violation of the PRA
Annual Number of Responses 379 379 0 0 0 0
Annual Time Burden (Hours) 15,643 15,643 0 0 0 0
Annual Cost Burden (Dollars) 331,800 331,800 0 0 0 0
No
No

$39,674
No
No
No
No
No
Uncollected
Patrick Yellin 202 564-2970 [email protected]

  No

On behalf of this Federal agency, I certify that the collection of information encompassed by this request complies with 5 CFR 1320.9 and the related provisions of 5 CFR 1320.8(b)(3).
The following is a summary of the topics, regarding the proposed collection of information, that the certification covers:
 
 
 
 
 
 
 
    (i) Why the information is being collected;
    (ii) Use of information;
    (iii) Burden estimate;
    (iv) Nature of response (voluntary, required for a benefit, or mandatory);
    (v) Nature and extent of confidentiality; and
    (vi) Need to display currently valid OMB control number;
 
 
 
If you are unable to certify compliance with any of these provisions, identify the item by leaving the box unchecked and explain the reason in the Supporting Statement.
02/25/2015


© 2024 OMB.report | Privacy Policy