Download:
pdf |
pdfOMB No. 3117‐0016/USITC No. 16‐2‐3536; Expiration Date: 6/30/2017
(No response is required if currently valid OMB control number is not displayed)
U.S. IMPORTERS’ QUESTIONNAIRE
DIOCTYL TEREPHTHALATE (DOTP) FROM KOREA
This questionnaire must be received by the Commission by July 14, 2016
See last page for filing instructions.
The information called for in this questionnaire is for use by the United States International Trade Commission in
connection with its antidumping duty investigation concerning dioctyl terephthalate (“DOTP”) from Korea (Inv. No. 731‐
TA‐1330 (Preliminary)). The information requested in the questionnaire is requested under the authority of the Tariff
Act of 1930, title VII. This report is mandatory and failure to reply as directed can result in a subpoena or other order to
compel the submission of records or information in your firm’s possession (19 U.S.C. § 1333(a)).
Name of firm
Address
City
State
Zip Code
Website
Has your firm imported dioctyl terephthalate (DOTP) (as defined on next page) and/or di‐n‐butyl terephthalate
(DBT) from any country at any time since January 1, 2013?
NO
(Sign the certification below and promptly return only this page of the questionnaire to the Commission)
YES
(Complete all parts of the questionnaire, and return the entire questionnaire to the Commission)
Return questionnaire via the U.S. International Trade Commission Drop Box by clicking on the
following link: https://dropbox.usitc.gov/oinv/. (PIN: DOTP)
CERTIFICATION
I certify that the information herein supplied in response to this questionnaire is complete and correct to the best of my
knowledge and belief and understand that the information submitted is subject to audit and verification by the Commission. By
means of this certification I also grant consent for the Commission, and its employees and contract personnel, to use the
information provided in this questionnaire and throughout this proceeding in any other import‐injury proceedings conducted by
the Commission on the same or similar merchandise.
I, the undersigned, acknowledge that information submitted in response to this request for information and throughout this
investigation or other proceeding may be disclosed to and used: (i) by the Commission, its employees and Offices, and contract
personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits,
reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C.
Appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. I understand that all
contract personnel will sign appropriate nondisclosure agreements.
Name of Authorized Official Title of Authorized Official
Date
Phone:
Signature
Fax:
Email address
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
Page 2
PART I.—GENERAL INFORMATION
Background. This proceeding was instituted in response to a petition filed on June 30, 2016, by Eastman
Chemical Company, Kingsport, Tennessee. Antidumping duties may be assessed on the subject imports
as a result of this proceeding if the Commission makes an affirmative determination of injury, threat, or
material retardation, and if the U.S. Department of Commerce makes an affirmative determination of
dumping. Questionnaires and other information pertinent to this proceeding are available at
http://www.usitc.gov/investigations/701731/2016/dioctyl_terephthalate_dotp_korea/preliminary.htm.
Dioctyl terephthalate (“DOTP”).‐‐The product covered by this investigation is dioctyl terephthalate
(“DOTP”), regardless of form. DOTP that has been blended with other products is included within this
scope when such blends include constituent parts that have not been chemically reacted with each
other to produce a different product. For such blends, only the DOTP component of the mixture is
covered by the scope of this investigation. DOTP that is otherwise subject to this investigation is not
excluded when commingled with DOTP from sources not subject to this investigation. Commingled
refers to the mixing of subject and non‐subject DOTP. Only the subject component of such commingled
products is covered by the scope of the investigation. DOTP has the general chemical formulation
C6H4(C8H17COO)2 and a chemical name of “bis (2‐ethylhexyl) terephthalate” and has a Chemical Abstract
Service (“CAS”) registry number of 6422‐86‐2. Regardless of the label, all DOTP is covered by this
investigation. Subject merchandise is currently classified under subheading 2917.39.20 of the
Harmonized Tariff Schedule of the United States (“HTSUS”). Blends containing DOTP may also be
classified under subheading 3812.20.10. While the CAS registry number and HTSUS classification are
provided for convenience and customs purposes, the written description of the scope of this
investigation is dispositive.
Importer.‐‐Any person or firm engaged, either directly or through a parent company or subsidiary,
in importing DOTP (as defined above) into the United States from a foreign manufacturer or
through its selling agent.
Reporting of information.‐‐ If information is not readily available from your records, provide carefully
prepared estimates. If your firm is completing more than one questionnaire (i.e., a producer, importer,
and/or purchaser questionnaire), you need not respond to duplicated questions.
Confidentiality.‐‐The commercial and financial data furnished in response to this questionnaire that
reveal the individual operations of your firm will be treated as confidential by the Commission to the
extent that such data are not otherwise available to the public and will not be disclosed except as may
be required by law (see 19 U.S.C. § 1677f). Such confidential information will not be published in a
manner that will reveal the individual operations of your firm; however, general characterizations of
numerical business proprietary information (such as discussion of trends) will be treated as confidential
business information only at the request of the submitter for good cause shown.
Verification.‐‐ The information submitted in this questionnaire is subject to audit and verification by the
Commission. To facilitate possible verification of data, please keep all files, worksheets, and supporting
documents used in the preparation of the questionnaire response. Please also retain a copy of the final
document that you submit.
Release of information.‐‐The information provided by your firm in response to this questionnaire, as
well as any other business proprietary information submitted by your firm to the Commission in
connection with this proceeding, may become subject to, and released under, the administrative
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
Page 3
protective order provisions of the Tariff Act of 1930 (19 U.S.C. § 1677f) and section 207.7 of the
Commission’s Rules of Practice and Procedure (19 CFR § 207.7). This means that certain lawyers and
other authorized individuals may temporarily be given access to the information for use in connection
with this proceeding or other import‐injury proceedings conducted by the Commission on the same or
similar merchandise; those individuals would be subject to severe penalties if the information were
divulged to unauthorized individuals.
I‐1.
OMB statistics.‐‐Please report below the actual number of hours required and the cost to your
firm of completing this questionnaire.
I‐2.
Hours
Dollars
The questions in this questionnaire have been reviewed with market participants to ensure that
issues of concern are adequately addressed and that data requests are sufficient, meaningful,
and as limited as possible. Public reporting burden for this questionnaire is estimated to average
40 hours per response, including the time for reviewing instructions, gathering data, and
completing and reviewing the questionnaire.
We welcome comments regarding the accuracy of this burden estimate, suggestions for
reducing the burden, and any suggestions for improving this questionnaire. Please attach such
comments to your response or send to the Office of Investigations, USITC, 500 E St. SW,
Washington, DC 20436.
Establishments covered.‐‐Provide the name and address of establishment(s) covered by this
questionnaire. If your firm is publicly traded, please specify the stock exchange and trading
symbol.
“Establishment”‐‐Each facility of a firm involved in the importation of DOTP, including auxiliary
facilities operated in conjunction with (whether or not physically separate from) such facilities.
I‐3.
Ownership.‐‐Is your firm owned, in whole or in part, by any other firm?
No
Yes‐‐List the following information
Firm name
Address
Extent of
ownership
(percent)
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
I‐4.
I‐5.
Page 4
Related importers/exporters.‐‐Does your firm have any related firms, either domestic or
foreign, that are engaged in importing DOTP from Korea into the United States or that are
engaged in exporting DOTP from Korea to the United States?
No
Yes‐‐List the following information.
Firm name
Address
Affiliation
Related producers.‐‐Does your firm have any related firms, either domestic or foreign, that are
engaged in the production of DOTP?
No
Yes‐‐List the following information.
Firm name
Address
Affiliation
I‐6.
Importing operations.‐‐Please indicate the nature of your firm’s importing operations on DOTP.
More than one answer may be applicable.
Importer of record
I‐7.
Takes title to the
imported product(s)
Consignee of the
imported products(s)
Customs broker or
freight forwarder
Consignee.‐‐If your firm is an importer of record of DOTP but is not the consignee, please list the
consignees below (firm name, address, telephone number, and individual to contact).
Firm name
Address
Contact person
and phone
number
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
I‐8.
Page 5
FTZ, TIB, or bonded warehouses.‐‐Please indicate whether your firm enters DOTP into, or
withdraws such merchandise from, foreign trade zones or bonded warehouses. Also indicate
whether your firm imports DOTP under the TIB (temporary importation under bond) program.
“Foreign trade zone” is a designated location in the United States where firms utilize special
procedures that allow delayed or reduced customs duty payments on foreign merchandise, as
well as other savings. A foreign trade zone must be designed as such pursuant to the rules and
procedures set forth in the Foreign‐Trade Zones Act.
“Bonded warehouse” is a secured facility supervised by U.S. customs, where dutiable landed
imports are stored pending their re‐export, or release after payment of import duties, taxes, and
other charges. A bonded warehouse must be designed as such pursuant to the rules and
procedures set forth in 19 U.S.C. § 1555.
“Temporary Importation under Bond (“TIB”) program” is a procedure whereby imported
merchandise may be entered under certain conditions for a limited time into the United States
free of duty. Under the program, an importer posts a bond for twice the amount of duty, taxes,
etc. that would otherwise be owed on the importation and agrees to export or destroy the
merchandise within a specified time or pay liquidated damages. This program is restricted to
certain categories of merchandise listed in subheadings 9813.00.05 through 9813.00.75 of the
Harmonized Tariff Schedule of the United States(HTS).
No
Yes
Foreign trade zones
Bonded warehouses
Temporary importation under bond
I‐9.
Third‐country trade activities.‐‐To your knowledge, have the products subject to this
proceeding been the subject of any other import relief proceedings in the United States or in
any other countries?
No
Yes–Please specify.
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
Page 6
PART II.‐‐TRADE AND RELATED INFORMATION
Further information on this part of the questionnaire can be obtained from Keysha Martinez (202‐205‐
2136, [email protected]). Supply all data requested on a calendar‐year basis.
II‐1. Contact information.‐‐ Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in part II.
Name
Title
Email
Telephone
Fax
II‐2. Changes in operations.‐‐Please indicate whether your firm has experienced any of the following
changes in relation to the importation of DOTP since January 1, 2013.
(check as many as appropriate)
(If checked, please describe; leave blank if not applicable)
Office/warehouse openings
Office/warehouse closings
Relocations
Expansions
Acquisitions
Consolidations
Prolonged shutdowns or
importation curtailments
Revised labor agreements
Other (e.g., technology)
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
II‐3.
Page 7
Arranged imports.‐‐Has your firm imported or arranged for the importation of DOTP for delivery
after March 31, 2016?
“Arranged imports” are imports for which your firm has placed an order with a foreign supplier
for subject merchandise, but delivery of those imports is not scheduled to occur until after the
date listed above.
No
Yes–Fill out the table below.
Quantity (in short tons)
Period/Source
II‐4.
Apr‐Jun 2016
Jul‐Sept 2016
Oct‐Dec 2016
Jan‐Mar 2017
Korea
All other sources
Reasons for importing if producer.‐‐If your firm also produces DOTP in the United States, please
indicate the reasons for importing this product. If your firm’s reasons differ by source, please
elaborate.
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
Page 8
Definitions
“Imports” –Those products identified for Customs purposes as imports for consumption for
which your firm was the importer of record (i.e., was responsible for paying any import duty) or
consignee (i.e., to which the merchandise was first delivered).
“Import quantities” –Quantities reported should be net of returns.
“Import values”—Values reported should be landed, duty‐paid values at the U.S. port of entry,
including ocean freight and insurance costs, brokerage charges, and import duties (i.e., all
charges except inland freight in the United States).
“U.S. commercial shipments”— Shipments made within the United States as a result of an arm’s
length commercial transaction in the ordinary course of business. Report net values (i.e., gross
sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned
goods) in U.S. dollars, f.o.b. your point of shipment.
“Internal consumption” –Product consumed internally by your firm.
“Transfers to related firms” –Shipments made to related domestic firms. Such transactions are
valued at fair market value.
“Related firm” –A firm that your firm solely or jointly owns, manages, or otherwise controls.
Such transactions are valued at fair market value.
“Export shipments”— Shipments to destinations outside the United States, including shipments
to related firms.
“Inventories” ‐‐Finished goods inventory, not raw materials or work in progress.
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records
used in the preparation of the trade data, as Commission staff may contact your firm regarding
questions on the trade data. The Commission may also request that your company submit copies
of the supporting documents/records (such as production and sales schedules, inventory records,
etc.) used to compile these data.
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
II‐5.
Page 9
IMPORTS FROM Korea.–Report your firm’s imports and your firm’s shipments and inventories
of DOTP imported from Korea by your firm during the specified periods.
Korea
Quantity (in short tons), value (in $1,000)
Calendar years
Item
Beginning‐of‐period inventories
(quantity) (A)
2013
2014
January‐March
2015
2015
2016
Imports:
Quantity (B)
Value (C)
End‐of‐period inventories
(quantity) (J)
Channels of distribution:
Commercial U.S. shipments:
To distributors (quantity) (K)
12
2
U.S. shipments:
Commercial shipments:
Quantity (D)
Value (E)
Internal consumption/
company transfers:
Quantity (F)
3
Value (G)
4
Export shipments:
Quantity (H)
Value (I)
To end users (quantity) (L)
1
Please identify the foreign producers, if known:
.
As indicated in page 2, DOTP sold as part of a mixture and/or blend is included in the scope of this
investigation. Therefore, any DOTP imported and sold as part of a mixture and/or blend should be included in the data
reported in this table, but reported on the basis of the contained DOTP (e.g., excluding the weight of the additional
chemicals that it is mixed with). Of your firm’s U.S. shipments in 2015 reported above, what share were sold as part of a
blend and/or mixture? percent; describe these blends/mixtures: .
3
Sales to related firms (including internal consumption) must be valued at fair market value. In the event that your firm
uses a different basis for valuing these sales within your company, please specify that basis (e.g., cost, cost plus, etc.) and
provide value data using that basis for each of the periods noted above: .
4
Identify your firm’s principal export markets: .
2
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
Page 10
II‐5. IMPORTS FROM Korea.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.‐‐Generally, the data reported for the
end‐of‐period inventories (i.e., line J) should be equal to the beginning‐of‐period inventories (i.e., line A),
plus imports (i.e., line B), less total shipments (i.e., lines D, F, and H). Please ensure that any differences
are not due to data entry errors in completing this form, but rather actually reflect your firm’s records;
and also provide any likely explanations for any differences (e.g., theft, loss, damage, record systems
issues, etc.) if they exist.
Calendar years
Reconciliation
2013
A + B – D – F – H – J = should equal zero
("0") or provide an explanation.1
2014
0
January‐March
2015
0
0
2015
2016
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are nonetheless
accurate: .
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities reported for channels of distribution
(i.e., lines K and L) in each time period equal the quantity reported for commercial U.S. commercial
shipments (i.e., line D) in each time period. If the calculated fields below return values other than zero
(i.e., “0”), the data reported must be revised prior to submission to the Commission.
Calendar years
January‐March
Reconciliation item
K + L – D = zero ("0"), if not revise.
2013
2014
0
2015
0
2015
0
0
2016
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
II‐6.
Page 11
IMPORTS FROM ALL OTHER SOURCES.–Report your firm’s imports and your firm’s shipments
and inventories of DOTP imported from all other sources (AOS) combined by your firm during
the specified periods.
ALL OTHER SOURCES
(list sources:
)
Quantity (in short tons), value (in $1,000)
Calendar years
Item
Beginning‐of‐period inventories
(quantity) (A)
2013
2014
January‐March
2015
2015
2016
Imports:
Quantity (B)
Value (C)
End‐of‐period inventories
(quantity) (J)
Channels of distribution:
Commercial U.S. shipments:
To distributors (quantity) (K)
1 2
2
U.S. shipments:
Commercial shipments:
Quantity (D)
Value (E)
Internal consumption/
company transfers:
Quantity (F)
3
Value (G)
4
Export shipments:
Quantity (H)
Value (I)
To end users (quantity) (L)
1
Please identify the foreign producers, if known:
.
As indicated in page 2, DOTP sold as part of a mixture and/or blend is included in the scope of this
investigation. Therefore, any DOTP imported and sold as part of a mixture and/or blend should be included in the data
reported in this table, but reported on the basis of the contained DOTP (e.g., excluding the weight of the additional
chemicals that it is mixed with). Of your firm’s U.S. shipments in 2015 reported above, what share were sold as part of a
blend and/or mixture? percent; And please describe these blends/mixtures: .
3
Sales to related firms (including internal consumption) must be valued at fair market value. In the event that your firm
uses a different basis for valuing these sales within your company, please specify that basis (e.g., cost, cost plus, etc.) and
provide value data using that basis for each of the periods noted above: .
4
Identify your firm’s principal export markets: .
2
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
II‐6.
Page 12
IMPORTS FROM ALL OTHER SOURCES.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.‐‐Generally, the data reported for the
end‐of‐period inventories (i.e., line J) should be equal to the beginning‐of‐period inventories (i.e., line A),
plus imports (i.e., line B), less total shipments (i.e., lines D, F, and H). Please ensure that any differences
are not due to data entry errors in completing this form, but rather actually reflect your firm’s records;
and also provide any likely explanations for any differences (e.g., theft, loss, damage, record systems
issues, etc.) if they exist.
Calendar years
Reconciliation
2013
A + B – D – F – H – J = should equal zero
("0") or provide an explanation.1
2014
0
January‐March
2015
0
0
2015
2016
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are nonetheless
accurate: .
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities reported for channels of distribution
(i.e., lines K and L) in each time period equal the quantity reported for commercial U.S. commercial
shipments (i.e., line D) in each time period. If the calculated fields below return values other than zero
(i.e., “0”), the data reported must be revised prior to submission to the Commission.
Calendar years
January‐March
Reconciliation item
2012
2013
2014
2015
2016
K + L – D = zero ("0"), if not revise.
0
0
0
0
0
II‐7. Other explanations.‐‐If your firm would like to further explain a response to a question in Part II
that did not provide a narrative response box, please note the question number and the
explanation in the space provided below. Please also use this space to highlight any issues your
firm had in providing the data in this section, including but not limited to technical issues with
the MS Word questionnaire.
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
Page 13
PART III.‐‐PRICING AND MARKET FACTORS
Further information on this part of the questionnaire can be obtained from Jeffrey Clark (202‐205‐3318,
[email protected]).
III‐1. Contact information.‐‐ Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in part III.
Name
Title
Email
Telephone
Fax
PRICE DATA
III‐2. This question requests quarterly quantity and value data for your firm’s commercial shipments
to unrelated U.S. customers since January 1, 2013 of the following products your firm imported
from Korea:
Product 1.‐‐Dioctyl terephthalate in 20 MT containers.
Product 2.‐‐Dioctyl terephthalate in bulk.
Please note that values should be f.o.b., U.S. point of shipment and should not include U.S.‐inland
transportation costs. Values should reflect the final net amount paid to your firm (i.e., should be net
of all deductions for discounts or rebates).
During January 2013‐March 2016, did your firm import from subject country Korea and/or
nonsubject country China and sell to unrelated U.S. customers any of the above listed products
(or any products that were competitive with these products)?
Yes.‐‐Please complete the following pricing data tables as appropriate.
No.‐‐Skip to question III‐3.
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
Page 14
III‐2a. Price data (Korea).‐‐Report below the quarterly price data1 for pricing products2 imported from
Korea and sold by your firm. Report data in actual short tons and actual dollars.
Korea
(Quantity in short tons, value in dollars)
Product 1
Quantity
Value
Quantity
Product 2
Period of shipment
Value
2013:
January‐March
April‐June
July‐September
October‐December
2014:
January‐March
April‐June
July‐September
October‐December
2015:
January‐March
April‐June
July‐September
October‐December
2016:
January‐March
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned
goods), f.o.b. your firm’s U.S. point of shipment.
2
Pricing product definitions are provided on the first page of Part IV.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product,
provide a description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
Page 15
III‐2b. Price data (China).‐‐Report below the quarterly price data1 for pricing products2 imported from
China and sold by your firm. Report data in actual short tons and actual dollars.
China
(Quantity in short tons, value in dollars)
Product 1
Quantity
Value
Quantity
Product 2
Period of shipment
Value
2013:
January‐March
April‐June
July‐September
October‐December
2014:
January‐March
April‐June
July‐September
October‐December
2015:
January‐March
April‐June
July‐September
October‐December
2016:
January‐March
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned
goods), f.o.b. your firm’s U.S. point of shipment.
2
Pricing product definitions are provided on the first page of Part IV.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product,
provide a description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
III‐2c. Pricing data methodology.‐‐Please describe the method and the kinds of documents/records
that were used to compile your price data.
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records used in
the preparation of the price data, as Commission staff may contact your firm regarding questions on the
price data. The Commission may also request that your company submit copies of the supporting
documents/records (such as sales journal, invoices, etc.) used to compile these data.
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
III‐3.
Page 16
Price setting.‐‐How does your firm determine the prices that it charges for sales of DOTP (check
all that apply)? If your firm issues price lists, please submit sample pages of a recent list.
Transaction
by
transaction
Contracts
III‐4.
Set
price
lists
Other
If other, describe
Discount policy.‐‐ Please indicate and describe your firm’s discount policies (check all that
apply).
Quantity
discounts
Annual
total
volume
discounts
III‐5.
No
discount
policy
Other
Describe
Pricing terms.‐‐
(a)
W
hat are your firm’s typical sales terms for DOTP imported from Korea?
Net 30
days
Net 60
days
2/10 net 30
days
Other
Other (specify)
(b)
On what basis are your firm’s prices of imported DOTP from Korea usually quoted (check
only one)?
Delivered
F.o.b.
If f.o.b., specify point
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
III‐6.
Page 17
Contract versus spot.‐‐Approximately what share of your firm’s sales of DOTP imported from
Korea in 2015 was on a (1) long‐term contract basis, (2) annual contract basis, (3) short‐term
contract basis, and (4) spot sales basis?
Long‐term
contracts
(multiple
deliveries for
more than 12
months)
Share of 2015
sales
III‐7.
%
Type of sale
Short‐term
Annual
contracts
contracts
(multiple
(multiple
deliveries for
deliveries for 12
less than 12
months)
months)
%
%
Total
(should
sum to
100.0%)
Spot sales
(for a single
delivery)
%
0.0
%
Contract provisions.‐‐Please fill out the table regarding your firm’s typical sales contracts for
DOTP from Korea (or check “not applicable” if your firm does not sell on a long‐term, short‐term
and/or annual contract basis).
Typical sales
contract provisions
Item
Short‐term
contracts
(multiple deliveries
for less than 12
months)
Average contract
duration
No. of
days
Price renegotiation
(during contract
period)
Yes
No
Quantity
Price
Both
Yes
No
Fixed quantity
and/or price
Meet or release
provision
Not applicable
Annual contracts
Long‐term contracts
(multiple deliveries (multiple deliveries for
for 12 months)
more than 12 months)
365
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
III‐8.
Lead times.‐‐What is your firm’s share of sales of DOTP imported from Korea from inventory vs.
produced to order and what is the typical lead time between a customer’s order and the date of
delivery for your firm’s sales of DOTP?
Share of 2015
Lead time (Average
Source
sales
number of days)
From your firm’s U.S. inventory
%
From foreign manufacturers’ inventory
%
Produced to order
%
Total (should sum to 100.0%)
III‐9.
Page 18
0.0 %
Shipping information.—
(a)
(b)
(c)
(d)
What is the approximate percentage of the total delivered cost of DOTP imported from
Korea that is accounted for by U.S. inland transportation costs? percent.
Who generally arranges the transportation to your firm’s customers’ locations?
Your firm Purchaser (check one)
When your firm sells DOTP imported from Korea, from where is it shipped?
Point of importation Storage facility (check one)
Indicate the approximate percentage of your firm’s sales of DOTP imported from Korea
that are delivered the following distances from your firm’s U.S. point of shipment.
Distance from your firm’s U.S. point of shipment
Within 100 miles
%
101 to 1,000 miles
%
Over 1,000 miles
%
Total (should sum to 100.0%)
Share
0.0 %
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
Page 19
III‐10. Geographical shipments.‐‐In which U.S. geographic market area(s) has your firm sold DOTP
imported from Korea since January 1, 2013 (check all that apply)?
Geographic area
Korea
Northeast.–CT, ME, MA, NH, NJ, NY, PA, RI, and VT.
Midwest.–IL, IN, IA, KS, MI, MN, MO, NE, ND, OH, SD, and WI.
Southeast.–AL, DE, DC, FL, GA, KY, MD, MS, NC, SC, TN, VA, and WV.
Central Southwest.–AR, LA, OK, and TX.
Mountains.–AZ, CO, ID, MT, NV, NM, UT, and WY.
Pacific Coast.–CA, OR, and WA.
Other.–All other markets in the United States not previously listed,
including AK, HI, PR, and VI.
III‐11. End uses.‐‐List the end uses of the DOTP that your firm imports from Korea. For each end‐use
product, what percentage of the total cost is accounted for by DOTP vs. other inputs?
Share of total cost of end‐use product
accounted for by
Total
(should sum to
100.0% across)
DOTP
Other inputs
End use product
%
%
0.0 %
%
%
0.0 %
%
%
0.0 %
III‐12. Substitutes.‐‐Can other products be substituted for DOTP?
No
Yes‐‐Please fill out the table.
Substitute
End use in which this
substitute is used
Have changes in the price of this substitute
affected the price for DOTP?
No Yes
1.
2.
3.
Explanation
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
Page 20
III‐13. Demand trends.‐‐Indicate how demand within the United States and outside of the United
States (if known) for DOTP has changed since January 1, 2013. Explain any trends and describe
the principal factors that have affected these changes in demand.
Market
Overall
No
Overall Fluctuate with
increase change decrease no clear trend
Explanation and factors
Within
the U.S.
Outside
the U.S.
III‐14. Product changes.‐‐Have there been any significant changes in the product range, product mix or
marketing of DOTP since January 1, 2013?
No
Yes
If yes, please describe.
III‐15. Conditions of competition.—
(a)
Is the DOTP market subject to business cycles (other than general economy‐wide
conditions) and/or other conditions of competition distinctive to DOTP?
Check all that apply.
Please describe.
No
Skip to question III‐16.
Yes‐Business cycles (e.g.
seasonal business)
Yes‐Other distinctive
conditions of competition
(b)
If yes, have there been any changes in the business cycles or conditions of competition
for DOTP since January 1, 2013?
No
Yes
If yes, please describe.
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
Page 21
III‐16. Supply constraints.‐‐Has your firm refused, declined, or been unable to supply DOTP since
January 1, 2013 (examples include placing customers on allocation or “controlled order entry,”
declining to accept new customers or renew existing customers, delivering less than the
quantity promised, been unable to meet timely shipment commitments, etc.)?
No
Yes
If yes, please describe.
III‐17. Raw materials.‐‐How have DOTP raw material prices changed since January 1, 2013?
Fluctuate
with no
Explain, noting how raw material price changes
Overall
No
Overall
increase change decrease clear trend have affected your firm’s selling prices for DOTP.
III‐18. Interchangeability.‐‐Is DOTP produced in the United States and in other countries
interchangeable (i.e., can they physically be used in the same applications)?
Please indicate A, F, S, N, or 0 in the table below:
A = the products from a specified country‐pair are always interchangeable
F = the products are frequently interchangeable
S = the products are sometimes interchangeable
N = the products are never interchangeable
0 = no familiarity with products from a specified country‐pair
Country‐pair
United States
Korea
China
Korea
China
Other countries
For any country‐pair producing DOTP that is sometimes or never interchangeable, identify
the country‐pair and explain the factors that limit or preclude interchangeable use:
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
Page 22
III‐19. Factors other than price.‐‐Are differences other than price (e.g., quality, availability,
transportation network, product range, technical support, etc.) between DOTP produced in the
United States and in other countries a significant factor in your firm’s sales of the products?
Please indicate A, F, S, N, or 0 in the table below:
A = such differences are always significant
F = such differences are frequently significant
S = such differences are sometimes significant
N = such differences are never significant
0 = no familiarity with products from a specified country‐pair
Country‐pair
United States
Korea
China
Korea
China
Other countries
For any country‐pair for which factors other than price always or frequently are a
significant factor in your firm’s sales of DOTP, identify the country‐pair and report the
advantages or disadvantages imparted by such factors:
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
Page 23
III‐20. Customer identification.‐‐List the names and contact information for your firm’s 10 largest U.S.
customers for DOTP since January 1, 2013. Indicate the share of the quantity of your firm’s total
shipments of DOTP that each of these customers accounted for in 2015.
Customer name
Contact person
Email
Telephone
City
State
Share
of
2015
sales
(%)
1
2
3
4
5
6
7
8
9
10
III‐21. Other explanations.‐‐If your firm would like to further explain a response to a question in Part III
that did not provide a narrative response box, please note the question number and the
explanation in the space provided below. Please also use this space to highlight any issues your
firm had in providing the data in this section, including but not limited to technical issues with
the MS Word questionnaire.
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
Page 24
PART IV.‐‐ALTERNATIVE PRODUCT INFORMATION
Further information on this part of the questionnaire can be obtained from Keysha Martinez (202‐205
2136, [email protected]).
IV‐1. Comparability of DOTP vs. Di‐n‐butyl terephthalate (“DBT”).‐‐For each of the following indicate
whether DOTP (subject to these investigations) and DBT (a related product) are: fully
comparable or the same, i.e., have no differentiation between them; mostly comparable or
similar; somewhat comparable or similar; never or not‐at‐all comparable or similar; or no
familiarity with products.
(a)
Characteristics and Uses.‐‐ The differences and similarities in the physical
characteristics and end uses between DOTP and DBT.
Mostly
Somewhat
Not at all
Fully comparable
comparable
comparable
comparable
NA/no familiarity
Please provide a narrative discussion for the comparability ratings you provided in terms of their
characteristics and uses:
(b)
Interchangeability.‐‐The ability to substitute DOTP and DBT in the same application.
Fully
interchangeable
Mostly
interchangeable
Somewhat
interchangeable
Not at all
interchangeable
NA/no
familiarity
Please provide a narrative discussion for the comparability ratings you provided in terms of
their interchangeability:
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
IV‐1.
Page 25
Comparability of DOTP vs DBT.‐‐Continued
(c)
Manufacturing facilities, production processes, and production employees.‐‐ Whether
DOTP and DBT are manufactured in the same facilities, from the same inputs, on the
same machinery and equipment, and using the same employees.
Fully the same
Mostly the same
Somewhat the
same
Not at all the
same
NA/no familiarity
Please provide a narrative discussion for the comparability ratings you provided in terms of their
manufacturing processes:
(d)
Channels of distribution.‐‐ Channels of distribution/market situation through which
DOTP and DBT are sold (i.e., sold direct to end users, through distributors, etc.).
Fully comparable
Mostly
comparable
Somewhat
comparable
Not at all
comparable
NA/no familiarity
Please provide a narrative discussion for the comparability ratings you provided in terms of their
channels of distribution:
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
IV‐1.
Page 26
Comparability of DOTP vs. DBT.‐‐Continued
(e)
Customer and producer perceptions.‐‐Perceptions as to the differences and/or
similarities in DOTP and DBT in the market (e.g., sales/marketing practices).
Fully comparable
Mostly
comparable
Somewhat
comparable
Not at all
comparable
NA/no familiarity
Please provide a narrative discussion for the comparability ratings you provided in terms of their
customer and producer perceptions:
(f)
Price.‐‐Whether prices are comparable or differ between DOTP and DBT.
Fully comparable
Mostly
comparable
Somewhat
comparable
Not at all
comparable
NA/no familiarity
Please provide a narrative discussion for the comparability ratings you provided in terms of their
prices:
IV‐2.
Imports of DBT.– Has your firm imported DBT from any country at any time since January 1,
2013?
No
Yes–Fill out the table below.
Quantity (in short tons), value (in $1,000)
Calendar years
Item
Imports from Korea:
Quantity
Value
Imports from all other sources:
Quantity
Value
2013
2014
January‐March
2015
2015
2016
Business Proprietary
U.S. Importers’ Questionnaire ‐ DOTP
Page 27
HOW TO FILE YOUR QUESTIONNAIRE RESPONSE
This questionnaire is available as a “fillable” form in MS Word format on the
Commission’s website at:
http://www.usitc.gov/investigations/701731/2016/dioctyl_terephthalate_dotp_korea/p
reliminary.htm.
Please do not attempt to modify the format or permissions of the questionnaire
document. Please submit the completed questionnaire using one of the methods noted
below. If your firm is unable to complete the MS Word questionnaire or cannot use one
of the electronic methods of submission, please contact the Commission for further
instructions.
• Upload via Secure Drop Box.—Upload the MS Word questionnaire along with a scanned copy of the
signed certification page (page 1) through the Commission’s secure upload facility:
Web address: https://dropbox.usitc.gov/oinv/
Pin: DOTP
• E‐mail.—E‐mail the MS Word questionnaire to [email protected]; include a scanned copy of
the signed certification page (page 1). Submitters are strongly encouraged to encrypt nonpublic
documents that are electronically transmitted to the Commission to protect your sensitive information
from unauthorized disclosure. The USITC secure drop‐box system and the Electronic Document
Information System (EDIS) use Federal Information Processing Standards (FIPS) 140‐2 cryptographic
algorithms to encrypt data in transit. Submitting your nonpublic documents by a means that does not
use these encryption algorithms (such as by email) may subject your firm’s nonpublic information to
unauthorized disclosure during transmission. If you choose a non‐encrypted method of electronic
transmission, the Commission warns you that the risk of such possible unauthorized disclosure is
assumed by you and not by the Commission.
If your firm did not import this product, please fill out page 1, print, sign, and submit a scanned copy to
the Commission.
Parties to this proceeding.—If your firm is a party to this proceeding, it is required to serve a copy of the
completed questionnaire on parties to the proceeding that are subject to administrative protective
order (see 19 CFR § 207.7). A list of such parties may be obtained from the Commission’s Secretary (202‐
205‐1803). A certificate of service must accompany the completed questionnaire you submit (see 19 CFR
§ 207.7). Service of the questionnaire must be made in paper form.
File Type | application/pdf |
File Title | Microsoft Word - US importer questionnaire_DOTP |
Author | keysha.martinez |
File Modified | 2016-07-05 |
File Created | 2016-07-05 |