17-4-3652 Foreign Producers'/Exporters' Questionnaire

Information collections for import injury investigations (producers, importers, purchasers, and foreign producer questionnaires and institution notices for 5-year reviews)

Foreign Producers--Rebar (F)

Steel Concrete Reinforcing Bar (REBAR) from Japan, Taiwan, and Turkey, Inv. No. 701-TA-564 and 731-TA-1338-1340 (Final)

OMB: 3117-0016

Document [pdf]
Download: pdf | pdf
OMB No. 3117‐0016/USITC No. 17‐4‐3652; Expiration Date: 6/30/2017 
(No response is required if currently valid OMB control number is not displayed) 

FOREIGN PRODUCERS’/EXPORTERS’ QUESTIONNAIRE 
 

STEEL CONCRETE REINFORCING BAR FROM JAPAN, TAIWAN, AND TURKEY 
 

 
This questionnaire must be received by the Commission by TUESDAY, APRIL 11, 2017. 
See last page for filing instructions. 
 
The information called for in this questionnaire is for use by the United States International Trade Commission in 
connection with its countervailing duty and antidumping investigations concerning steel concrete reinforcing bar 
(“rebar”) from Japan, Taiwan, and Turkey (Inv. No. 701‐TA‐564 and 731‐TA‐1338‐1340 (Final)). The information 
requested in the questionnaire is requested under the authority of the Tariff Act of 1930, title VII. 
 
Name of firm            

 

Address            

 

Website            

 

Has your firm produced or exported rebar (as defined on next page) at any time since January 1, 2014? 

 NO 

(Sign the certification below and promptly return only this page of the questionnaire to the Commission) 

 YES 

(Complete all parts of the questionnaire, and return the entire questionnaire to the Commission)  

 

Data reported in this questionnaire relate to (Check one): 
 Japan 

 Taiwan 

 Turkey 

 

Return questionnaire via the Commission Drop Box by clicking on the following link:  
https://dropbox.usitc.gov/oinv/. (PIN: RBAR) 
CERTIFICATION 
I  certify  that  the  information  herein  supplied  in  response  to  this  questionnaire  is  complete  and  correct  to  the  best  of  my 
knowledge and belief and understand that the information submitted is subject to audit and verification by the Commission. By 
means  of  this  certification  I  also  grant  consent  for  the  Commission,  and  its  employees  and  contract  personnel,  to  use  the 
information provided in this questionnaire and throughout this proceeding in any other import‐injury proceedings conducted by 
the Commission on the same or similar merchandise.  
 
I,  the  undersigned,  acknowledge  that  information  submitted  in  response  to  this  request  for  information  and  throughout  this 
proceeding  or  other  proceeding  may  be  disclosed  to  and  used:  (i)  by  the  Commission,  its  employees  and  Offices,  and  contract 
personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits, 
reviews,  and  evaluations  relating  to  the  programs,  personnel,  and  operations  of  the  Commission  including  under  5  U.S.C. 
Appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. I understand that all 
contract personnel will sign appropriate nondisclosure agreements 
 
      
                  
                 
 
Name of Authorized Official                    Title of Authorized Official  
Date 
 
 
     Phone:            
                  
 
Signature 
 

 
 Fax:            

        Email address 
 

Business Proprietary 
 
Foreign Producers’ Questionnaire – Rebar from Japan, Taiwan, and Turkey (Final) 

Page 2 

PART I.—GENERAL INFORMATION 
 
Background. ‐‐This proceeding was instituted in response to petitions filed on September 20, 2016, by 
the Rebar Trade Action Coalition and its individual members: Byer Steel Group, Inc., Cincinnati, OH; 
Commercial Metals Company, Irving, TX; Gerdau Ameristeel U.S. Inc., Tampa, FL; Nucor Corporation, 
Charlotte, NC; and Steel Dynamics, Inc., Pittsboro, IN. Countervailing and antidumping duties may be 
assessed on the subject imports as a result of these proceedings if the Commission makes an affirmative 
determination of injury, threat, or material retardation, and if the U.S. Department of Commerce 
(“Commerce”) makes an affirmative determination of subsidization and/or dumping. Questionnaires 
and other information pertinent to this proceeding are available at  
https://www.usitc.gov/investigations/title_7/2017/steel_concrete_reinforcing_bar_japan_taiwan_and/f
inal.htm 
 
Rebar.‐‐ The merchandise subject to these investigations is steel concrete reinforcing bar imported in 
either straight length or coil form (rebar) regardless of metallurgy, length, diameter, or grade or lack 
thereof. Subject merchandise includes deformed steel wire with bar markings (e.g., mill mark, size, or 
grade) and which has been subjected to an elongation test. The subject merchandise includes rebar that 
has been further processed in the subject country or a third country, including but limited to a cutting, 
grinding, galvanizing, painting, coating, or any other processing that would not otherwise remove the 
merchandise from the scope of the investigations if performed in the country of manufacture of the 
rebar. Specifically excluded are plain rounds (i.e., nondeformed or smooth rebar). Also excluded from 
the scope is deformed steel wire meeting ASTM A1064/A1064M with no bar markings (e.g., mill mark, 
size, or grade) and without being subject to an elongation test. 
 
The subject merchandise is classifiable in the Harmonized Tariff Schedule of the United States ("HTSUS") 
primarily under statistical reporting numbers 7213.10.0000, 7214.20.0000, and 7228.30.8010. The 
subject merchandise may also be reported under other HTSUS numbers including 7215.90.1000, 
7215.90.5000, 7221.00.0017, 7221.00.0018,1 7221.00.0030, 7221.00.0045, 7222.11.0001, 7222.11.0057, 
7222.11.0059, 7222.30.0001, 7227.20.0080, 7227.90.6030, 7227.90.6035, 7227.90.6040, 7228.20.1000, 
and 7228.60.6000.  
 
Reporting of information.‐‐ If information is not readily available from your records, provide carefully 
prepared estimates. If your firm is completing more than one questionnaire (i.e., a producer, importer, 
purchaser and/or foreign producer questionnaire), you need not respond to duplicated questions.   
 
Confidentiality.‐‐The commercial and financial data furnished in response to this questionnaire that 
reveal the individual operations of your firm will be treated as confidential by the Commission to the 
extent that such data are not otherwise available to the public and will not be disclosed except as may 
be required by law (see 19 U.S.C. §1677f). Such confidential information will not be published in a 
manner that will reveal the individual operations of your firm; however, general characterizations of 
numerical business proprietary information (such as discussion of trends) will be treated as confidential 
business information only at the request of the submitter for good cause shown. 
 
Verification.‐‐The information submitted in this questionnaire is subject to audit and verification by the 
Commission. To facilitate possible verification of data, please keep all files, worksheets, and supporting 
     1 Prior to the establishment of statistical reporting numbers 7221.00.0017, 7221.00.0018 on July 1, 2016, rebar 
may have been imported under statistical reporting number 7221.00.15 (discontinued on July 1, 2016). 

Business Proprietary 
 
Foreign Producers’ Questionnaire – Rebar from Japan, Taiwan, and Turkey (Final) 

Page 3 

documents used in the preparation of the questionnaire response. Please also retain a copy of the final 
document that you submit. 
 
Release of information.‐‐The information provided by your firm in response to this questionnaire, as 
well as any other business proprietary information submitted by your firm to the Commission in 
connection with this proceeding, may become subject to, and released under, the administrative 
protective order provisions of the Tariff Act of 1930 (19 U.S.C. § 1677f) and section 207.7 of the 
Commission’s Rules of Practice and Procedure (19 CFR § 207.7). This means that certain lawyers and 
other authorized individuals may temporarily be given access to the information for use in connection 
with this proceeding or other import‐injury proceedings conducted by the Commission on the same or 
similar merchandise; those individuals would be subject to severe penalties if the information were 
divulged to unauthorized individuals. 
 
I‐1. 
OMB statistics.‐‐Please report below the actual number of hours required and the cost to your 
firm of completing this questionnaire. 
 

 

 
I‐2. 

Hours 

Dollars 

      

      

 
The questions in this questionnaire have been reviewed with market participants to ensure that 
issues  of  concern  are  adequately  addressed  and  that  data  requests  are  sufficient,  meaningful, 
and as limited as possible. Public reporting burden for this questionnaire is estimated to average 
20  hours  per  response,  including  the  time  for  reviewing  instructions,  gathering  data,  and 
completing and reviewing the questionnaire.  
 
We welcome comments regarding the accuracy of this burden estimate, suggestions for 
reducing the burden, and any suggestions for improving this questionnaire. Please attach such 
comments to your response or send to the Office of Investigations, USITC, 500 E St. SW, 
Washington, DC  20436. 
Establishments covered.‐‐Provide the name and address of establishment(s) covered by this 
questionnaire. If your firm is publicly traded, please specify the stock exchange and trading 
symbol. 

 
“Establishment”‐‐ Each facility of a firm in Japan, Taiwan and/or Turkey involved in the 
production or export of rebar, including auxiliary facilities operated in conjunction with 
(whether or not physically separate from) such facilities. Firms operating more than one 
establishment in Japan, Taiwan and/or Turkey should combine the data for all establishments 
into a single report. 
 
      
 

Business Proprietary 
 
Foreign Producers’ Questionnaire – Rebar from Japan, Taiwan, and Turkey (Final) 
I‐3. 

Page 4 

Related producers.‐‐Does your firm or any related firm produce, have the capability to produce, 
or have any plans to produce rebar in the United States or other countries? 
 
 No   
 Yes‐‐Please name the firm(s) and country(ies) below and, if U.S. producer(s), 
ensure that they complete the Commission’s producer questionnaire. 

 
      
 
I‐4. 

Related U.S. importers.Since January 1, 2014, has your firm or any related firm imported rebar 
into the United States? Does your firm or any related firm have any plans to import rebar into 
the United States? 

 
 No   
 
      
 

 Yes‐‐Please name the firm(s) below and ensure that they complete the 
Commission’s importer questionnaire. 

Business Proprietary 
 
Foreign Producers’ Questionnaire – Rebar from Japan, Taiwan, and Turkey (Final) 
I‐5. 

Page 5 

U.S. importers.‐‐Please provide the names, street addresses (not P.O. boxes), contacts, 
telephone numbers, and e‐mail addresses of the FIVE largest U.S. importers of your firm’s rebar 
in 2016.   

 

Importer’s name 

Contact 
person  

Email 

Telephone 

1 

      

      

      

      

2 

      

      

      

      

3 

      

      

      

      

4 

      

      

      

      

5 

      

      

      

      

 

Share of 
your 
Street address (not 
firm’s 
P.O. box), city, state, 
2016 U.S. 
and zip code 
exports 
(%) 
Street Address 
          ,                        
City     State   Zip Code 

Street Address 
          ,                        
City     State   Zip Code 

Street Address 
          ,                        
City     State   Zip Code 

Street Address 
          ,                        
City     State   Zip Code 

Street Address 
          ,                        
City     State   Zip Code 

      

      

      

      

      

Business Proprietary 
 
Foreign Producers’ Questionnaire – Rebar from Japan, Taiwan, and Turkey (Final) 

Page 6 

PART II.‐‐TRADE AND RELATED INFORMATION 
 
Further information on this part of the questionnaire can be obtained from Amelia Shister (202‐205‐
2047, [email protected]). Supply all data requested on a calendar‐year basis. 
 
II‐1.  Contact information.‐‐ Please identify the responsible individual and the manner by which 
Commission staff may contact that individual regarding the confidential information submitted 
in part II.   
 
Name 
      
Title 
      
Email 
      
Telephone 
      
Fax 
      
 
II‐2.  Changes in operations.‐‐Please indicate whether your firm has experienced any of the following 
changes in relation to the production of rebar since January 1, 2014. 
 

(check as many as appropriate) 

(If checked, please list the date/month/ year of event(s) and 
describe the nature of the events; leave blank if not 
applicable) 

  plant openings  

      

  plant closings 

      

  relocations 

      

  expansions 

      

  acquisitions 

      

  consolidations 

      

  prolonged shutdowns or production 
curtailments 

      

  revised labor agreements 

      

      
  raw material supply shortage or 
disruption (e.g. billet steel, rail steel, axle 
steel, or steel scrap) 
  other (e.g., technology) 

      

Business Proprietary 
 
Foreign Producers’ Questionnaire – Rebar from Japan, Taiwan, and Turkey (Final) 
II‐3. 

Page 7 

Anticipated changes in operations.‐‐Does your firm anticipate any changes in the character of 
its operations or organization (as noted above) relating to the production of rebar in the future? 
 
 No 
 Yes–Supply details as to the time, nature, and significance of such changes 
and provide underlying assumptions, along with relevant portions of 
business plans or other supporting documentation that address this 
issue. Include in the response a specific projection of your firm’s 
capacity to produce rebar (in short tons) for 2017 and 2018. 

 
      
 
II‐4a.  Production using same machinery.‐‐ Please report your firm’s production of products made on 
the same equipment and machinery used to produce rebar, and the combined production 
capacity on this shared equipment and machinery. 
 
“Overall production capacity”  or “capacity” –The level of production that your 
establishment(s) could reasonably have expected to attain during the specified periods for all 
products manufactured in that establishment using the same manufacturing equipment. 
Assume normal operating conditions (i.e., using equipment and machinery in place and ready to 
operate; normal operating levels (hours per week/weeks per year) and time for downtime, 
maintenance, repair, and cleanup). 
 
“Production” ‐‐All production in your establishment(s) in Japan, Taiwan and/or Turkey, including 
production consumed internally within your firm. 
 
Quantity (in short tons) 
Calendar years 
Item 
Overall production capacity for all products 

2016 
      

     

   0

   0 

   0

     

      

     

Merchant‐quality bar 

     

      

     

SBQ bar 

     

      

     

     

      

     

     

      

     

   0

   0 

   0

Out‐of‐scope.‐‐ 
Plain/smooth rebar 

Wire rod 
2

Other products  
Total production of all products 
2

2015 
     

Production of: 
Rebar1 

1

2014 

 Data entered for production of rebar will populate here once reported in question II‐10. 
 Please identify these products:           .   

 

Business Proprietary 
 
Foreign Producers’ Questionnaire – Rebar from Japan, Taiwan, and Turkey (Final) 

Page 8 

II‐4b.  Operating parameters.‐‐The production capacity reported in II‐4a is based on operating            hours 
per week,            weeks per year. 
 
II‐4c.  Capacity calculation.‐‐Please describe the methodology used to calculate overall production 
capacity reported in II‐4a, and explain any changes in reported capacity. 
 
      
 
II‐4d.  Production constraints.‐‐Please describe the constraint(s) that set the limit(s) on your firm’s 
production capacity. 
 
      
 
II‐4e.  Product shifting.— 

 
(i). 

Is your firm able to switch production (capacity) between rebar and other products using 
the same equipment and/or labor? 

 
 No 
 
 

 Yes‐‐(i.e., have produced other products or are able to produce other  
products). Please identify other actual or potential products:   
      
. 

 
(ii). 

Please describe the factors that affect your firm’s ability to shift production capacity 
between products (e.g., time, cost, relative price change, etc.), and the degree to which 
these factors enhance or constrain such shifts. 

 
      
 
II‐5. 

Share of sales.‐‐What percentage of your firm’s total sales in its most recent fiscal year was 
represented by sales of rebar?             percent. 

 
II‐6. 

 
II‐7. 

 

Firm's estimated share of production in Japan, Taiwan and/or Turkey.‐‐Please estimate the 
percentage of total production of rebar in the country specified on the certification page accounted 
for by your firm’s production in 2016.             percent. 
Firm's estimated share of country's exports.‐‐Please estimate the percentage of total exports to 
the United States of rebar from the country specified on the certification page accounted for by 
your firm’s exports in 2016.             percent. 

Business Proprietary 
 
Foreign Producers’ Questionnaire – Rebar from Japan, Taiwan, and Turkey (Final) 
II‐8. 

Page 9 

Inventories in the United States.‐‐Has your firm, since January 1, 2014, maintained any 
inventories of rebar in the United States (not including inventories held by firms identified in 
question I‐3)? 
 
“Inventories”‐‐Finished goods inventory, not raw materials or work in progress. 
 
 No 
 Yes‐‐Report the quantity of such end‐of‐period inventories below. 

 
Quantity (in short tons) 
Calendar year 
Item 
Inventory 
 
II‐9. 

2015 
     

2016 
      

Third country trade actions.‐‐Is the rebar exported by your firm subject to 
antidumping/countervailing duty/safeguard findings, remedies, or proceedings?  
 
 No   
 Yes‐‐List the products(s), countries affected, and the date of such 
findings/remedies/proceedings. 

 
      
 

2014 

     

Business Proprietary 
 
Foreign Producers’ Questionnaire – Rebar from Japan, Taiwan, and Turkey (Final) 

Page 10 

II‐10.  Trade data.‐‐Report your firm’s production capacity, production, shipments, and inventories 
related to the production of rebar in your establishment(s) in Japan, Taiwan and/or Turkey 
during the specified periods.  Do not include resales of rebar that your firm did not produce in 
this question; those data to the degree they are exported to the United States should only be 
reported in question II‐11. 
 
Do not submit data by manufacturing facility if they are in the same country.  If your firm has 
multiple manufacturing establishments within one country, you are required to combine data 
for those establishments within one foreign producer questionnaire response. 
 
Do not submit data on multiple countries combined.  The establishments reported here should 
all be located in the country of the firm’s address reported on the certification page. 
Multinational companies with production in multiple subject countries should submit separate 
foreign producer questionnaire responses for each subject country.  
 
“Average production capacity”  or “capacity” –The level of production that your 
establishment(s) could reasonably have expected to attain during the specified periods for all 
products manufactured in that establishment using the same manufacturing equipment. 
Assume normal operating conditions (i.e., using equipment and machinery in place and ready to 
operate; normal operating levels (hours per week/weeks per year) and time for downtime, 
maintenance, repair, and cleanup; and a typical or representative product mix). 
 
“Production” ‐‐All production in your establishment(s) in Japan, Taiwan and/or Turkey, including 
production consumed internally within your firm. 
 
“Shipments”‐‐Shipments of products produced in your establishment(s) in Japan, Taiwan and/or 
Turkey. Quantities reported should be net of returns.  
 
“Home market commercial shipments”‐‐Shipments, other than internal consumption and 
transfers to related firms, within Japan, Taiwan and/or Turkey. 
 
“Home market internal consumption/transfers to related firms”‐‐Shipments made to 
related firms in Japan, Taiwan and/or Turkey, including product consumed internally by your 
firm. 
 
“Export shipments”‐‐Shipments to destinations outstide of the country indicacted on page 1 
(Japan, Taiwan and/or Turkey), including shipments to related firms. 
 
“Inventories”‐‐Finished goods inventory, not raw materials or work‐in‐progress. 
 
 
Note:  As requested in Part I of this questionnaire, please keep all supporting documents/records 
used in the preparation of the trade data, as Commission staff may contact your firm regarding 
questions on the trade data. The Commission may also request that your company submit copies 
of the supporting documents/records (such as production and sales schedules, inventory records, 
etc.) used to compile these data. 

Business Proprietary 
 
Foreign Producers’ Questionnaire – Rebar from Japan, Taiwan, and Turkey (Final) 

Page 11 

II‐10.  Trade data.‐‐Continued. 
 
Quantity (in short tons) 

Item 

Actual experience

Projections1 

Calendar year 

Calendar year 

2014 
2

2015 

2016 

2017 

2018 

Average production capacity  (A) 

     

     

     

      

     

Beginning‐of‐period inventories (B) 

     

     

     

      

     

Production.‐‐ 
In straight lengths (C) 

     

     

     

      

     

     

     

     

      

     

   0

   0

   0

   0 

   0

     

     

     

      

     

In coils (D) 
Total in‐scope rebar production (E) 
Home market shipments:   
Internal consumption/ transfers (F) 
Commercial shipments (G) 

     

     

     

      

     

 

     

     

     

      

     

Exports to all other markets  (I) 

     

     

     

      

     

Total exports (J)  
(should equal H+I) 

   0

   0

   0

   0 

   0

Total shipments (K) 
(should equal F+G+H+I) 

   0

   0

   0

   0 

   0

     

     

     

      

     

Exports to the United States (H)  
3

End‐of‐period inventories (L) 
1

 Please explain the basis for your firm’s projections.           .
 The production capacity reported is based on operating            hours per week,            weeks per 
year.  Please describe the methodology used to calculate production capacity, and explain any changes 
in reported capacity.            . 
3
 Identify principal other export markets.           . 
2

 

Business Proprietary 
 
Foreign Producers’ Questionnaire – Rebar from Japan, Taiwan, and Turkey (Final) 

Page 12 

II‐10.  Trade data.—Continued. 
 
RECONCILIATION OF SHIPMENTS, PRODUCTION, AND INVENTORY.‐‐Generally, the data reported 
for the end‐of‐period inventories (i.e., line L) should be equal to the beginning‐of‐period 
inventories (i.e., line B), plus production (i.e., line C and D), less total shipments (i.e., lines  F, G, H, 
and I).  Please ensure that any differences are not due to data entry errors in completing this 
form, but rather actually reflect your firm’s records; and also provide any likely explanations for 
any differences (e.g., theft, loss, damage, record systems issues, etc.) if they exist. 
 
Actual experience 
Projections
Calendar year 
Item 

2014 

2015 

Calendar year 
2016 

2017 

2018 

B + C + D ‐ F –G – H – I ‐ L = 
should equal zero ("0") or 
provide an explanation.1 
   0
   0
   0
   0 
   0
1
 Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are 
nonetheless accurate. 
      
 
II‐11.  Exports to the United States not produced by your firm.‐‐Report your firm’s exports to the 
United States of rebar that was produced in Japan, Taiwan and/or Turkey but not by your firm 
during the specified periods.  Note these data should not be included in question II‐10.  
 
Quantity (in short tons) 

Item 
Exports of rebar to the United States 
not produced by your firm1 

Actual experience

Projections 

Calendar year 

Calendar year 

2014 
     

2015 
     

2016 
     

2017 
      

2018 
     

1

 List the producer(s).            

 
 
II‐12.  Other explanations.‐‐If your firm would like to further explain a response to a question in Part II 
that did not provide a narrative box, please note the question number and the explanation in 
the space provided below.  Please also use this space to highlight any issues your firm had in 
providing the data in this section, including but not limited to technical issues with the MS Word 
questionnaire. 
 
      
 

Business Proprietary 
 
Foreign Producers’ Questionnaire – Rebar from Japan, Taiwan, and Turkey (Final) 

Page 13 

Correcting Valid Number Error Messages.‐‐If you are completing a Commission 
questionnaire in a country that uses periods (“.”) to delineate multiples of 1000 (e.g., one million would 
appear as $1.000.000 instead of as $1,000,000), you may be unable to enter in numbers greater than 
999 in numeric form fields.  This issues stem from your computer number formatting setting (e.g., not 
the MS Word document itself, but the computer from which you are opening up the document).  In the 
United States commas (,) delineate multiples of 1000 and periods (.) delineate fractions less than one. 
 Many EU countries use the reverse where multiples of 1000 are delineated with periods (.) and 
fractions less than one are delineated with commas (,). The US International Trade Commission’s 
questionnaires are set‐up in the United States with the U.S. number formatting. When this formatting 
interacts with a computer set to EU number formatting, we believe this may cause this issue.   
 
The solution to this data entry issue is to temporarily change your operating system’s number 
formatting to be consistent with the U.S. number formatting system while you complete the 
questionnaire. 
 
To temporarily change your computer’s number settings to U.S. settings, please do the following (for 
Microsoft Windows Operating system): 






START 
Control Panel 
Region and Language (under Clock, Language, and Region category) 
Format tab 
Change the Format from your existing one (e.g. “Italian (Italy)”) to “English (United States)” (see 
screen shots below) 

 
When you do this the number “twelve million dollars and thirty five cents” would change from 
$12.000.000,35 (Italy format) to $12,000,000.35 (U.S. format), and then there will be no conflict with 
the USITC foreign producer questionnaire form.  When you finish reporting the data then you can close 
the questionnaire and switch back to Italy settings. 

Business Proprietary 
 
Foreign Producers’ Questionnaire – Rebar from Japan, Taiwan, and Turkey (Final) 

Page 14 

Business Proprietary 
 
Foreign Producers’ Questionnaire – Rebar from Japan, Taiwan, and Turkey (Final) 

Page 15 

HOW TO FILE YOUR QUESTIONNAIRE RESPONSE  
 
This questionnaire is available as a “fillable” form in MS Word format on the 
Commission’s website at:  
 
https://www.usitc.gov/investigations/title_7/2017/steel_concrete_reinforcing_bar_japan_taiwa
n_and/final.htm 
 
Please do not attempt to modify the format or permissions of the questionnaire 
document. Please submit the completed questionnaire using one of the methods noted 
below. If your firm is unable to complete the MS Word questionnaire or cannot use one 
of the electronic methods of submission, please contact the Commission for further 
instructions.   
 
• Upload via Secure Drop Box.—Upload the MS Word questionnaire along with a scanned copy of the 
signed certification page (page 1) through the Commission’s secure upload facility: 
Web address:  https://dropbox.usitc.gov/oinv/  

Pin:  RBAR 

• E‐mail.—E‐mail your questionnaire to  [email protected]; include a scanned copy of the signed 
certification page (page 1). Submitters are strongly encouraged to encrypt nonpublic documents that are 
electronically transmitted to the Commission to protect your sensitive information from unauthorized 
disclosure. The USITC secure drop‐box system and the Electronic Document Information System (EDIS) 
use Federal Information Processing Standards (FIPS) 140‐2 cryptographic algorithms to encrypt data in 
transit. Submitting your nonpublic documents by a means that does not use these encryption algorithms 
(such as by email) may subject your firm’s nonpublic information to unauthorized disclosure during 
transmission. If you choose a non‐encrypted method of electronic transmission, the Commission warns 
you that the risk of such possible unauthorized disclosure is assumed by you and not by the Commission. 
 
If your firm did not produce or export this product, please fill out page 1, print, sign, and submit a 
scanned copy to the Commission. 
 
Parties to this proceeding.—If your firm is a party to this proceeding, you are required to serve a copy of 
the completed questionnaire on parties to the proceeding that are subject to administrative protective 
order (see 19 CFR § 207.7). A list of such parties may be obtained from the Commission’s Secretary (202‐
205‐1803). A certificate of service must accompany the completed questionnaire you submit (see 19 CFR 
§ 207.7). Service of the questionnaire must be made in paper form. 
 


File Typeapplication/pdf
File TitleMicrosoft Word - Foreign Producers--Rebar (F)
Authorjoanna.lo
File Modified2017-03-13
File Created2017-03-13

© 2024 OMB.report | Privacy Policy