C-tpat

Customs and Trade Partnership Against Terrorism (C-TPAT) and Trusted Trader Program

C-TPAT Screen Shots 2016

C-TPAT

OMB: 1651-0077

Document [docx]
Download: docx | pdf

OMB No. 1651-0077

Expiration 9-30-2016





C-TPAT, Company Profile

Shape1

NOTICE: THIS SYSTEM CONTAINS TRADE SECRETS AND COMMERCIAL AND FINANCIAL INFORMATION RELATING TO THE CONFIDENTIAL BUSINESS OF PRIVATE PARTIES. THE TRADE SECRETS ACT, (18 U.S.C. 1905), PROVIDES PENALTIES FOR DISCLOSURE OF SUCH INFORMATION. CBP EMPLOYEES WHO VIOLATE THIS ACT AND MAKE WRONGFUL DISCLOSURES OF CONFIDENTIAL COMMERCIAL INFORMATION MAY BE SUBJECT TO A PERSONAL FINE OF UP TO $1,000, IMPRISONMENT FOR NOT MORE THAN ONE YEAR, OR BOTH, AND SHALL BE REMOVED FROM EMPLOYMENT. AN IMPROPER DISCLOSURE OF CERTAIN INFORMATION CONTAINED IN THIS SYSTEM WOULD CONSTITUTE A VIOLATION OF THE PRIVACY ACT (5 U.S.C. 552A). VIOLATORS COULD BE SUBJECT TO A FINE OF NOT MORE THAN $5,000. INFORMATION CONTAINED IN THIS SYSTEM IS SUBJECT TO THE 3RD PARTY RULE AND MAY NOT BE DISCLOSED TO OTHER GOVERNMENT AGENCIES WITHOUT THE EXPRESS PERMISSION OF THE AGENCY SUPPLYING THE ORIGINAL INFORMATION.

PAPERWORK REDUCTION ACT STATEMENT: AN AGENCY MAY NOT CONDUCT OR SPONSOR AN INFORMATION COLLECTION AND A PERSON IS NOT REQUIRED TO RESPOND TO THIS INFORMATION UNLESS IT DISPLAYS A CURRENT VALID OMB CONTROL NUMBER. THE CONTROL NUMBER FOR THIS COLLECTION IS 1651-0077. THE ESTIMATED AVERAGE TIME TO COMPLETE THIS APPLICATION IS 20 HOURS PER RESPONDENT. THE OBLIGATION TO RESPOND IS REQUIRED TO OBTAIN A BENEFIT. IF YOU HAVE ANY COMMENTS REGARDING THIS BURDEN ESTIMATE YOU CAN WRITE TO U.S. CUSTOMS AND BORDER PROTECTION, REGULATIONS AND RULINGS, 90 K STREET, NE, WASHINGTON, DC 20229. EXPIRATION DATE 9-30-2016.

Shape2

  

Shape3

Business Type

Select the business type of the company joining the C-TPAT program.


.1.1 Business Type Shape4 Select a business type

If you have an Application Exception Token enter it below.


.1.2 Application Exception Token Shape5



Company Information

Enter the required company information below.

.3.1 Company Name Shape6 Enter a company name


.3.2 Company Doing Business As Shape7


.3.3 Company Telephone Shape8 Enter a company telephone number


.3.4 Company Fax Shape9


Primary Address

Enter the primary address of the company.

.4.1 Type Shape10 The type is required.


.4.2 Country/Territory Shape11 The country is required.


.4.3 Street Address Shape12 The address line 1 is required.


.4.4 Street Address 2 Shape13


.4.5 City Shape14

The city is required. Please enter a valid city.

.4.6 State Shape15 The state is required.

.4.7 Zip/Postal Code Shape16 The postal code is required.

.4.8Is the address also a mailing address? Shape17

Other Addresses

There are no other addresses.

Add New Address

Additional Company Information

Select the appropriate answers below.


.5.1 Owner Type Shape18 Select an owner type


.5.2 Years In Business Shape19 Select the number of years in business

.5.3 Number of Employees

Shape20 Select the number of employees

Company Contacts

Enter all of the contacts from your company that will be participating in the C-TPAT program. Ensure that you have selected a designated Point of Contact (POC) who is an officer of the company.
NOTE: If you need to change the email address of an existing contact, please delete the existing contact, then add a new contact with the new email address.

.6.1Contacts

There are no contacts.

Contact DetailsShape21 Shape22 Please enter at least one contact who is a point of contact.
You can only be one of the listed contacts. Make sure 'Are you this user?' is only selected for one contact.
Email addresses must be unique to one contact. Please make sure that more than one contact is not using the same email address. A company officer must be listed as a contact.

Shape23

Company Contacts

Enter all of the contacts from your company that will be participating in the C-TPAT program. Ensure that you have selected a designated Point of Contact (POC) who is an officer of the company.
NOTE: If you need to change the email address of an existing contact, please delete the existing contact, then add a new contact with the new email address.


Contact Details

 

.6.2 Salutation Shape24


Select a contact type

 

.6.3 First Name Shape25


Enter a first name
Please enter a valid first name

 

.6.4 Last Name Shape26


Enter a last name
Please enter a valid last name

 

.6.5 Contact Title Shape27


Enter a title

 

.6.6 Telephone Shape28


Enter a telephone number

 

.6.7 Email Address Shape29
Enter an email address


 

.6.8 Confirm Email Address Shape30


Confirm your email address
Email Address and Confirm don't match

 

.6.9 Secondary Email Address Shape31


 

.6.10 Confirm Secondary Email Address Shape32


Secondary Email & Confirm don't match

 

.6.11 Contact Type Shape33


Select a contact type
This contact type is not a valid Point of Contact

 

.6.12 Primary Company Point of Contact (POC) Shape34

 

.6.13 Are you this user? Shape35


 

.6.14 Contractor Company Name Shape36


Enter the company name

 

.6.15 Contractor Business ID Shape37


Enter the business ID

 

.6.16 Country Shape38
Select a country



 

.6.17 Street Address 1 Shape39


Enter the street address

 

.6.18 Street Address 2 Shape40


 

.6.19 City Shape41
Enter the city
Please enter a valid city name

 

.6.20 State


Shape42 
Select a state

 

.6.21 Zip/Postal Code Shape43
Enter the zip/postal code



Shape44    Shape45    Shape46

Business Information

.7.8 In the past 24 months, how many crossings with freight did you transport under your operating authority into the United States? Shape47 Enter the number of freight crossings Enter a numeric value

.7.9 U.S. Department of Transportation (DOT) issued Number Shape48 DOT issued number must be a five to seven character alphanumeric code

.7.10 U.S. National Motor Freight Traffic Association issued Standard Carrier Alpha Code (SCAC) Shape49 SCAC must be a four digit alphabetical code

Additional IOR Numbers

.7.11 Additional ID Shape50 IOR Number must be in the format of ###-##-####, ##-#######?? (where the last two characters are alphanumeric), or ######-##### IOR Number must be in the format of ###-##-####, ##-#######?? (where the last two characters are alphanumeric), or ######-##### Manufacturer ID must be a maximum of 15 alphanumeric characters with the first two being the alphabetical ISO Country Code Manufacturer ID must be a maximum of 15 alphanumeric characters with the first two being the alphabetical ISO Country Code

Shape51 Shape52 Shape53

.7.12 Entered IDs Shape54

Enter any terminals or warehouses that you own and their addresses:

There are no highway terminals.


Add Terminal
Shape55 Shape56

.7.13 Depress and hold the Control (Ctrl) key to select multiple border crossing locations Shape57 Select at least one border crossing

.7.14 Depress and hold the Control (Ctrl) key to select the services that you offer Shape58 Select at least one service provided

.7.15 Depress and hold the Control (Ctrl) key to select the sources for your drivers Shape59 Select at one source of drivers

Shape60    Shape61    Shape62

Shape63

Mutual Recognition Agreement

Consent for Disclosure of Customs-Trade Partnership Against Terrorism (C-TPAT) Information to the Specified Country Government Officials

Upon completion of this consent, C-TPAT will be authorized to provide the information outlined below to government officials for the country specified. The information will only be provided to those government officials directly responsible for the program in which the United States Customs and Border Protection has entered into Mutual Recognition.

The information that will be released will be:

  • Company name

  • Company identifiers (i.e. SCAC, IOR, MID)

  • Program Status

  • Date of membership

Your company has the right to revoke this consent at any time by removing the check block for that country. The revocation will not have any effect on any actions taken in reliance on the consent prior to the time consent was revoked.

.8.1 Agreement Shape64 I Agree

.8.2 Countries

Shape65 Canada

Shape66 Japan

Shape67 Jordan

Shape68 New Zealand (Aotearoa)

Please select at least one country from the list.


C-TPAT-Partner Agreement to Voluntarily Participate

This Agreement is made between xx (hereafter referred to as "the Partner") and U.S. Customs and Border Protection (hereafter referred to as "CBP").

This Agreement between the Partner and CBP will enhance the joint efforts of both entities to better secure the international supply chain to the United States. CBP and the Partner recognize the need to improve and expand existing security practices in order to achieve a more efficient and compliant import process.

The Partner agrees to develop and implement, within a framework consistent with the listed C-TPAT criteria, a verifiable and documented program to enhance security procedures throughout its supply chain. Where the Partner does not exercise control of a production facility, distribution entity, or process in the supply chain, the Partner agrees to communicate the C-TPAT criteria to those entities.


Specifically, the Partner agrees to:

  1. Commit to working with business partners and CBP to meet C-TPAT minimum security criteria.

  2. Using the online application process (the C-TPAT Security Link Portal), complete a supply chain security profile and update information regarding the company on an annual basis.

  3. Provide complete and accurate company information in response to C-TPAT inquiries.

  4. Comply with C-TPAT program requirements to ensure integrity at each stage of the Partners supply chain.

  5. Cooperate with the C-TPAT validation process including assisting the CBP Supply Chain Security Specialists (SCSS) in planning for and conducting site visits.

  6. Acknowledge and cooperate with re-validation procedure as deemed necessary by CBP.

  7. Maintain security integrity throughout the partnership, conducting periodic self-assessments in line with the changing risks and complexity of international business and trade.

  8. Cooperate with CBP, domestic and foreign port authorities, foreign customs administrations and others in the trade community, in advancing the goals of C-TPAT and the Container Security Initiative (CSI).

  9. Acknowledge and accept this Agreement to Voluntarily Participate by marking the I agree box below.

Upon acceptance, review, and/or certification in the C-TPAT program, CBP will:

  1. Assign a Supply Chain Security Specialist (SCSS) to work individually with the Partner in C-TPAT procedures.

  2. Review the Partners C-TPAT application within 90 days of receipt.

  3. Conduct a C-TPAT validation within one year of the Partners C-TPAT certification in accordance with section 215 (a) of the Security and Accountability for Every Port Act of 2006 (SAFE Port Act), Pub. L. 109-347, 120 Stat. 1917. CBP will, to the extent possible, be flexible to the Partners scheduling availability.

  4. Provide the Partner with feedback regarding the validation including any security enhancement recommendations, actions required, and recognition of CBP identified best practices.

  5. Endeavor to assist the Partner with security threat awareness training and in identifying high risk factors specific to the Partners operating environment(s).

  6. Not request that the Partner take any action which would conflict with any U.S. laws or regulations relevant to the Partners operations.

  7. Provide C-TPAT participant verification capability via the Status Verification Interface (SVI).

  8. Conduct re-validations in accordance with time frames set forth in section 219 of the SAFE Port Act.

  9. Allow the Partner a reasonable timeframe within which to comply with and/or implement security practices or measures that represent an amendment or change to current C-TPAT imposed requirements.

  10. Where feasible and to the extent practical, extend specific C-TPAT benefits to Partners at U.S. ports of entry.

  11. Provide the opportunity for C-TPAT Partners to be eligible to participate in the developing Mutual Recognition Program by exchanging information with foreign administrations, which may enable C-TPAT partners to receive more benefits, but only through prior consent of the C-TPAT member.

CBP acknowledges that during the course of the C-TPAT membership relationship between CBP and the Partner, CBP may become privy to proprietary business information. CBP recognizes the confidential nature of such information, and agrees to take the appropriate measures to maintain the confidentiality of this information in accordance with U.S. law.

This Agreement is subject to review by the Partner or CBP and may be terminated with written notice by either party.

This Agreement cannot, by law, exempt the Partner from any statutory or regulatory sanctions in the event that discrepancies are discovered during a physical examination of cargo or the review of documents associated with the Partner
s CBP transactions.

Nothing in this Agreement relieves the Partner of any statutory or regulatory responsibilities under United States law, including any requirements imposed under DHS and CBP statutes and regulations.


xx
Company Name





Create Company Profile

  1. 1 Company Profile

Shape69 Shape70





Shape71 Shape72






File Typeapplication/vnd.openxmlformats-officedocument.wordprocessingml.document
File TitleC-TPAT, Company Profile
AuthorAuthorized User
File Modified0000-00-00
File Created2021-01-23

© 2024 OMB.report | Privacy Policy