2079ss06

SUPPORTING STATEMENT

ENVIRONMENTAL PROTECTION AGENCY

NESHAP for Metal Can Manufacturing Surface Coating (40 CFR Part 63, Subpart KKKK) (Renewal)

1. Identification of the Information Collection

1(a) Title of the Information Collection

NESHAP for Metal Can Manufacturing Surface Coating (40 CFR Part 63, Subpart KKKK) (Renewal), EPA ICR Number 2079.06, OMB Control Number 2060-0541.

1(b) Short Characterization/Abstract

The National Emission Standards for Hazardous Air Pollutants (NESHAP) for Metal Can Manufacturing Surface Coating were proposed on January 15, 2003, promulgated on November 13, 2003, and last amended on January 6, 2006. The latest amendment corrected errors and clarified sections of the rule. These regulations apply to existing and new facilities in this source category that use 5,700 liters (1,500 gallons) per year or more of coatings and that is a major source of hazardous air pollutant (HAP). The metal can surface coating source category includes any facilities that coat or print metal cans (including decorative tins), metal ends for metal or composite cans, or metal crowns or closures for any type of can during any stage of the can manufacturing process. The source category does not include the coating of metal coils for cans or can parts. Coil coating for cans and can parts is included in the NESHAP for the surface coating of metal coil (40 CFR Part 63, Subpart SSSS). The source category does not include the coating of pails and drums, which is covered in the NESHAP for the surface coating of miscellaneous metal parts and products (40 CFR Part 63, Subpart MMMM). New facilities include those that commenced construction or reconstruction after the date of proposal. This information is being collected to assure compliance with 40 CFR Part 63, Subpart KKKK.

In general, all NESHAP standards require initial notifications, performance tests, and periodic reports by the owners/operators of the affected facilities. They are also required to maintain records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility, or any period during which the monitoring system is inoperative. These notifications, reports, and records are essential in determining compliance, and are required of all affected facilities subject to NESHAP.

Any owner/operator subject to the provisions of this part shall maintain a file containing these documents, and retain the file for at least five years following the generation date of such maintenance reports and records. All reports are sent to the delegated state or local authority. In the event that there is no such delegated authority, the reports are sent directly to the U.S. Environmental Protection Agency (EPA) regional office.

The “Affected Public” are owners or operators of metal can manufacturing facilities. The “burden” to the Affected Public may be found below in Table 1: Annual Respondent Burden and Cost – NESHAP for Metal Can Manufacturing Surface Coating (40 CFR Part 63, Subpart KKKK) (Renewal). The Federal Government’s “burden” is attributed entirely to work performed by either Federal employees or government contractors and may be found below in Table 2: Average Annual EPA Burden and Cost – NESHAP for Metal Can Manufacturing Surface Coating (40 CFR Part 63, Subpart KKKK) (Renewal).

Based on our consultations with industry representatives, there is an average of one affected facility at each plant site and that each plant site has only one respondent (i.e., the owner/operator of the plant site).

Over the next three years, approximately 5 respondents per year will be subject to these standards, and no additional respondents per year will become subject to these same standards.

The Office of Management and Budget (OMB) approved the currently active ICR without any “Terms of Clearance”.

2. Need for and Use of the Collection

2(a) Need/Authority for the Collection

The EPA is charged under Section 112 of the Clean Air Act, as amended, to establish standards of performance for each category or subcategory of major sources and area sources of hazardous air pollutants. These standards are applicable to new or existing sources of hazardous air pollutants and shall require the maximum degree of emission reduction. In addition, section 114(a) states that the Administrator may require any owner/operator subject to any requirement of this Act to:

(A) Establish and maintain such records; (B) make such reports; (C) install, use, and maintain such monitoring equipment, and use such audit procedures, or methods; (D) sample such emissions (in accordance with such procedures or methods, at such locations, at such intervals, during such periods, and in such manner as the Administrator shall prescribe); (E) keep records on control equipment parameters, production variables or other indirect data when direct monitoring of emissions is impractical; (F) submit compliance certifications in accordance with Section 114(a)(3); and (G) provide such other information as the Administrator may reasonably require.

In the Administrator's judgment, HAP emissions from metal can manufacturing surface coating either cause or contribute to air pollution that may reasonably be anticipated to endanger public health and/or welfare. Therefore, the NESHAP were promulgated for this source category at 40 CFR Part 63, Subpart KKKK.

2(b) Practical Utility/Users of the Data

The recordkeeping and reporting requirements in these standards ensure compliance with the applicable regulations which were promulgated in accordance with the Clean Air Act. The collected information is also used for targeting inspections and as evidence in legal proceedings.

Performance tests are required in order to determine an affected facility’s initial capability to comply with the emission standards. Continuous emission monitors are used to ensure compliance with these standards at all times. During the performance test a record of the operating parameters under which compliance was achieved may be recorded and used to determine compliance in place of a continuous emission monitor.

The notifications required in these standards are used to inform the Agency or delegated authority when a source becomes subject to the requirements of the regulations. The reviewing authority may then inspect the source to check if the pollution control devices are properly installed and operated, leaks are being detected and repaired, and the standard is being met. The performance test may also be observed.

The required semiannual reports are used to determine periods of excess emissions, identify problems at the facility, verify operation/maintenance procedures and for compliance determinations.

3. Non-duplication, Consultations, and Other Collection Criteria

The requested recordkeeping and reporting are required under 40 CFR Part 63, Subpart KKKK.

3(a) Non-duplication

If the subject standards have not been delegated, the information is sent directly to the appropriate EPA regional office. Otherwise, the information is sent directly to the delegated state or local agency. If a state or local agency has adopted its own similar standards to implement the Federal standards, a copy of the report submitted to the state or local agency can be sent to the Administrator in lieu of the report required by the Federal standards. Therefore, duplication does not exist.

3(b) Public Notice Required Prior to ICR Submission to OMB

An announcement of a public comment period for the renewal of this ICR was published in the Federal Register (81 FR 26546) on May 3, 2016. No comments were received on the burden published in the Federal Register.

3(c) Consultations

The Agency has consulted industry experts and internal data sources to project the number of affected facilities and industry growth over the next three years. The primary source of information as reported by industry, in compliance with the recordkeeping and reporting provisions in these standards, is the Integrated Compliance Information System (ICIS). ICIS is EPA’s database for the collection, maintenance, and retrieval of compliance data for industrial and government-owned facilities. The growth rate for the industry is based on our consultations with the Agency’s internal industry experts.

Industry trade associations and other interested parties were provided an opportunity to comment on the burden associated with the standard as it was being developed. In developing this ICR, we contacted both the Can Manufacturers Institute (CMI), at (202) 232-4677; and the American Coatings Association, at (202) 462-6272. CMI provided editorial comments, which have been incorporated into this ICR supporting statement.

It is our policy to respond after a thorough review of comments received since the last ICR renewal, as well as to those comments submitted in response to the first Federal Register notice. In this case, no comments were submitted on the first Federal Register notice.

3(d) Effects of Less-Frequent Collection

Less frequent-information collection would decrease the margin of assurance that facilities are continuing to meet the standards. Requirements for information gathering and recordkeeping are useful techniques to ensure that good operation and maintenance practices are applied and emission limitations are met. If the information required by these standards was collected less-frequently, the proper operation and maintenance of control equipment and the possibility of detecting violations would be less likely.

3(e) General Guidelines

These reporting or recordkeeping requirements do not violate any of the regulations promulgated by OMB under 5 CFR Part 1320, Section 1320.5.

These standards require the respondents to maintain all records, including reports and notifications for at least five years (records for the 2 most-recent years must be kept onsite; records for the other 3 years may be kept offsite). This is consistent with the General Provisions as applied to these standards. EPA believes that the five-year records retention requirement is consistent with the Part 70 permit program and the five-year statute of limitations on which the permit program is based. The retention of records for five years allows EPA to establish the compliance history of a source, any pattern of non-compliance and to determine the appropriate level of enforcement action. EPA has found that the most-flagrant violators have violations extending beyond five years. In addition, EPA would be prevented from pursuing the violators due to the destruction or nonexistence of essential records.

3(f) Confidentiality

Any information submitted to the Agency for which a claim of confidentiality is made will be safeguarded according to the Agency policies set forth in Title 40, chapter 1, part 2, subpart B - Confidentiality of Business Information (CBI) (see 40 CFR 2; 41 FR 36902, September 1, 1976; amended by 43 FR 40000, September 8, 1978; 43 FR 42251, September 20, 1978; 44 FR 17674, March 23, 1979).

3(g) Sensitive Questions

The reporting or recordkeeping requirements in these standards do not include sensitive questions.

4. The Respondents and the Information Requested

4(a) Respondents/SIC Codes

The respondents to the recordkeeping and reporting requirements are owners and operators of metal can manufacturing surface coating operations. The United States Standard Industrial Classification (SIC) code for the respondents affected by the standards and the corresponding North American Industry Classification System (NAICS) codes are listed in the table below. Not all facilities classified under the NAICS codes in the following table will be subject to the standard because some of the classifications cover products outside the scope of the NESHAP for the surface coating of metal cans.

Standard (40 CFR Part 63, Subpart KKKK)	SIC Codes	NAICS Codes
Metal Can Manufacturing	3411	332431
Metal Crown, Closure, and Other Metal Stamping (except Automotive)	3466	332119
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers	3999	332812
All Other Miscellaneous Fabricated Metal Product Manufacturing	3497	332999

4(b) Information Requested

(i) Data Items

In this ICR, all the data that is recorded or reported is required by the NESHAP for Metal Can Manufacturing Surface Coating (40 CFR Part 63, Subpart KKKK).

A source must make the following reports:

Notifications
Initial notification	63.3510(b), 63.5(d), 63.9(b)
Notification of compliance status	63.3510(c), 63.9(h)(1-3)
Notification of construction or reconstruction	63.3510(a), 63.5(a)
Notification of actual startup	63.3510(a), 63.9(b)
Notification of performance test	63.3510(a), 63.7(b), 63.8(e), 63.9(e)

Reports
Semiannual report	63.3511(a)
Excess emissions report	63.3511(a)(4-8)
Report of performance test	63.3511(b)
Startup, shutdown, malfunction report	63.3511(c)

A source must keep the following records:

Recordkeeping
Five-year retention of records	63.3513(b), 63.10(b)(1)
Material formulation data	63.3512(b)
Records of HAP content calculations	63.3512(c)
Copies of notifications and reports	63.3512(a)
Records of names of materials used	63.3512(d)
HAP fractions in each material used	63.3512(e)
Coating solids fraction in each material used	63.3512(f)
Density of materials used	63.3512(g)
Documentation of waste material shipped offsite	63.3512(h)
Documentation of deviations	63.3512(i)
Start up, shutdown, and malfunction plan/records	63.3512(j), 63.6(e)
Records of continuous compliance with operating limits	63.3512(j)
Documentation of capture system efficiency determination	63.3512(j)
Documentation of add-on control device destruction or removal efficiency determination	63.3512(j)
Documentation of control device performance tests	63.3512(j), 63.10(b)
Determination of capture system and add-on control operating limits	63.3512(j)
Work practice plan/records	63.3512(j)

Electronic Reporting

Some of the respondents are using monitoring equipment that automatically records parameter data. Although personnel at the affected facility must still evaluate the data, internal automation has significantly reduced the burden associated with monitoring and recordkeeping at a plant site.

(ii) Respondent Activities

Respondent Activities

Familiarization with the regulatory requirements.

Install, calibrate, maintain, and operate CMS for opacity, or for pressure drop for oxidizer, carbon adsorber, condenser, concentrator, or capture system.

Perform initial performance test, Reference Method 1, 1A, 2, 2A, 2C, 2D, 2F, 2G, 3, 3A, 3B, 4, 24, 25, 25A, 204, 204A, 204B, 204C, 204D, 204E, 204F, 311, or ASTM Method D1475-98, D2697-86, D6093-97 tests, and repeat performance tests if necessary.

Write the notifications and reports listed above.

Enter information required to be recorded above.

Submit the required reports developing, acquiring, installing, and utilizing technology and systems for the purpose of collecting, validating, and verifying information.

Develop, acquire, install, and utilize technology and systems for the purpose of processing and maintaining information.

Develop, acquire, install, and utilize technology and systems for the purpose of disclosing and providing information.

Train personnel to be able to respond to a collection of information.

Transmit, or otherwise disclose the information.

5. The Information Collected: Agency Activities, Collection Methodology, and Information Management

5(a) Agency Activities

EPA conducts the following activities in connection with the acquisition, analysis, storage, and distribution of the required information:

Agency Activities

Review notifications and reports, including performance test reports, and excess emissions reports, required to be submitted by industry.

Audit facility records.

Input, analyze, and maintain data in the Enforcement and Compliance History Online (ECHO) and ICIS.

5(b) Collection Methodology and Management

Following notification of startup, the reviewing authority could inspect the source to determine whether the pollution control devices are properly installed and operated. Performance test reports are used by the Agency to discern a source’s initial capability to comply with the emission standards, and note the operating conditions under which compliance was achieved. Data and records maintained by the respondents are tabulated and published for use in compliance and enforcement programs. The semiannual reports are used for problem identification, as a check on source operation and maintenance, and for compliance determinations.

Information contained in the reports is reported by state and local governments in the ICIS Air database, which is operated and maintained by EPA's Office of Compliance. ICIS is EPA’s database for the collection, maintenance, and retrieval of compliance data for industrial and government-owned facilities. EPA uses ICIS for tracking air pollution compliance and enforcement by local and state regulatory agencies, EPA regional offices and EPA headquarters. EPA and its delegated Authorities can edit, store, retrieve and analyze the data.

The records required by this regulation must be retained by the owner/operator for five years.

5(c) Small Entity Flexibility

There are no small businesses affected by the regulation. We verified with CMI that none of the five current major source facilities are small entities.

The impact on small entities (i.e., small businesses) was taken into consideration during the development of the regulation. Small entities were afforded extensive flexibility in demonstrating compliance through compliance options that give small entities flexibility in choosing the most cost effective and least burdensome alternative for their operation.

5(d) Collection Schedule

The specific frequency for each information collection activity within this request is shown below in Table 1: Annual Respondent Burden and Cost – NESHAP for Metal Can Manufacturing Surface Coating (40 CFR Part 63, Subpart KKKK) (Renewal).

6. Estimating the Burden and Cost of the Collection

Table 1 documents the computation of individual burdens for the recordkeeping and reporting requirements applicable to the industry for the subpart included in this ICR. The individual burdens are expressed under standardized headings believed to be consistent with the concept of burden under the Paperwork Reduction Act. Where appropriate, specific tasks and major assumptions have been identified. Responses to this information collection are mandatory.

The Agency may neither conduct nor sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB Control Number.

6(a) Estimating Respondent Burden

The average annual burden to industry over the next three years from these record-keeping and reporting requirements is estimated to be 1,940 hours (Total Labor Hours from Table 1 below). These hours are based on Agency studies and background documents from the development of the regulation, Agency knowledge and experience with the NESHAP program, the previously-approved ICR, and any comments received.

6(b) Estimating Respondent Costs

(i) Estimating Labor Costs

This ICR uses the following labor rates:

Managerial $138.43 ($65.92+ 110%)

Technical $106.45 ($50.69 + 110%)

Clerical $52.77 ($25.13 + 110%)

These rates are from the United States Department of Labor, Bureau of Labor Statistics, September 2015, “Table 2. Civilian Workers, by occupational and industry group.” The rates are from column 1, “Total compensation.” The rates have been increased by 110 percent to account for the benefit packages available to those employed by private industry.

(ii) Estimating Capital/Startup and Operation and Maintenance Costs

The type of industry costs associated with the information collection activities in these subject standards are both labor costs which are addressed elsewhere in this ICR and the costs associated with continuous monitoring. The capital/startup costs are one-time costs when a facility becomes subject to the regulation. The annual operation and maintenance costs are the ongoing costs to maintain the monitor and other costs such as photocopying and postage.

(iii) Capital/Startup vs. Operation and Maintenance (O&M) Costs

Capital/Startup vs. Operation and Maintenance (O&M) Costs
(A) Continuous Monitoring Device	(B) Capital/Startup Cost for One Respondent	(C) Number of New Respondents	(D) Total Capital/Startup Cost, (B X C)	(E) Annual O&M Costs for One Respondent	(F) Number of Respondents with O&M	(G) Total O&M, (E X F)
CEM	$16,000	0	$0	$1,200	5	$6,000

Note: Totals have been rounded to 3 significant figures. Figures may not add exactly due to rounding.

The total capital/startup costs for this ICR are $0. This is the total of column D in the above table.

The total operation and maintenance (O&M) costs for this ICR are $6,000. This is the total of column G.

The average annual cost for capital/startup and operation and maintenance costs to industry over the next three years of the ICR is estimated to be $6,000.

6(c) Estimating Agency Burden and Cost

The only costs to the Agency are those costs associated with analysis of the reported information. EPA's overall compliance and enforcement program includes such activities as the examination of records maintained by the respondents, periodic inspection of sources of emissions, and the publication and distribution of collected information.

The average annual Agency cost during the three years of the ICR is estimated to be $9,080.

This cost is based on the average hourly labor rate as follows:

Managerial $64.16 (GS-13, Step 5, $40.10 + 60%)

Technical $47.62 (GS-12, Step 1, $29.76 + 60%)

Clerical $25.76 (GS-6, Step 3, $16.10 + 60%)

These rates are from the Office of Personnel Management (OPM), 2016 General Schedule, which excludes locality rates of pay. The rates have been increased by 60 percent to account for the benefit packages available to Federal government employees. Details upon which this estimate is based appear below in Table 2: Average Annual EPA Burden and Cost – NESHAP for Metal Can Manufacturing Surface Coating (40 CFR Part 63, Subpart KKKK) (Renewal).

6(d) Estimating the Respondent Universe and Total Burden and Costs

Based on our research for this ICR, on average over the next three years, approximately 5 existing respondents will be subject to these standards. It is estimated that no additional respondents per year will become subject to these same standards. The overall average number of respondents, as shown in the table below, is 5 per year.

The number of respondents is calculated using the following table that addresses the three years covered by this ICR.

Number of Respondents
	Respondents That Submit Reports		Respondents That Do Not Submit Any Reports
Year	(A) Number of New Respondents 1	(B) Number of Existing Respondents	(C) Number of Existing Respondents that keep records but do not submit reports	(D) Number of Existing Respondents That Are Also New Respondents	(E) Number of Respondents (E=A+B+C-D)
1	0	5	0	0	5
2	0	5	0	0	5
3	0	5	0	0	5
Average	0	5	0	0	5

¹ New respondents include sources with constructed, reconstructed and modified affected facilities.

Column D is subtracted to avoid double-counting respondents. As shown above, the average Number of Respondents over the three-year period of this ICR is 5.

The total number of annual responses per year is calculated using the following table:

Total Annual Responses
(A) Information Collection Activity	(B) Number of Respondents	(C) Number of Responses	(D) Number of Existing Respondents That Keep Records But Do Not Submit Reports	(E) Total Annual Responses E=(BxC)+D
Initial notification	0	1	0	0
Notification of compliance status	0	1	0	0
Notification of construction/reconstruction	0	1	0	0
Notification of actual startup	0	1	0	0
Notification of performance test	0	1.2	0	0
Report of performance test	0	1.2	0	0
Semiannual report	5	2	0	10
Excess emissions report	5	2	0	10
Startup, shutdown, malfunction report	1.25	1	0	1.25
			Total	21.25

The number of Total Annual Responses is 21 (rounded).

The total annual labor costs are $200,000. Details regarding these estimates may be found below in Table 1: Annual Respondent Burden and Cost – NESHAP for Metal Can Manufacturing Surface Coating (40 CFR Part 63, Subpart KKKK) (Renewal).

6(e) Bottom Line Burden Hours and Cost Tables

The detailed bottom line burden hours and cost calculations for the respondents and the Agency are shown in Tables 1 and 2 below, respectively, and summarized below as well.

(i) Respondent Tally

The total annual labor hours are 1,940 hours. Details regarding these estimates may be found below in Table 1: Annual Respondent Burden and Cost – NESHAP for Metal Can Manufacturing Surface Coating (40 CFR Part 63, Subpart KKKK) (Renewal).

We assume that burdens for managerial tasks take 5% of the time required for technical tasks because the typical tasks for managers are to review and approve reports. Clerical burdens are assumed to take 10% of the time required for technical tasks because the typical duties of clerical staff are to proofread the reports, make copies and maintain records.

Furthermore, the annual public reporting and recordkeeping burden for this collection of information is estimated to average 91 hours per response.

The total annual capital/startup and O&M costs to the regulated entity are $6,000. The cost calculations are detailed in Section 6(b)(iii), Capital/Startup vs. Operation and Maintenance (O&M) Costs.

(ii) The Agency Tally

The average annual Agency burden and cost over next three years is estimated to be 196 labor hours at a cost of $9,080. See below in Table 2: Average Annual EPA Burden and Cost – NESHAP for Metal Can Manufacturing Surface Coating (40 CFR Part 63, Subpart KKKK) (Renewal).

We assume that burdens for managerial tasks take 5% of the time required for technical tasks because the typical tasks for managers are to review and approve reports. Clerical burdens are assumed to take 10% of the time required for technical tasks because the typical duties of clerical staff are to proofread the reports, make copies and maintain records.

6(f) Reasons for Change in Burden

There is a small adjustment increase of 2 respondent labor hours, due to rounding of all total calculated values to three significant digits. The increase is not due to any program change.

6(g) Burden Statement

The annual public reporting and recordkeeping burden for this collection of information is estimated to average 91 hours per response. “Burden” means the total time, effort, or financial resources expended by persons to generate, maintain, retain, or disclose or provide information to or for a Federal agency. This includes the time needed to review instructions; develop, acquire, install, and utilize technology and systems for the purposes of collecting, validating, and verifying information, processing and maintaining information, and disclosing and providing information; adjust the existing ways to comply with any previously-applicable instructions and requirements; train personnel to be able to respond to a collection of information; search data sources; complete and review the collection of information; and transmit or otherwise disclose the information.

An agency may neither conduct nor sponsor, and a person is not required to respond to, a collection of information unless it displays a valid OMB Control Number. The OMB Control Numbers for EPA regulations are listed at 40 CFR Part 9 and 48 CFR Chapter 15.

To comment on the Agency's need for this information, the accuracy of the provided burden estimates, and any suggested methods for minimizing respondent burden, including the use of automated collection techniques, EPA has established a public docket for this ICR under Docket ID Number EPA-HQ-OECA-2013-0345. An electronic version of the public docket is available at http://www.regulations.gov/, which may be used to obtain a copy of the draft collection of information, submit or view public comments, access the index listing of the contents of the docket, and to access those documents in the public docket that are available electronically. When in the system, select “search,” then key in the docket ID number identified in this document. The documents are also available for public viewing at the Enforcement and Compliance Docket and Information Center in the EPA Docket Center (EPA/DC), WJC West, Room 3334, 1301 Constitution Ave., NW, Washington, DC. The EPA Docket Center Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number for the Reading Room is (202) 566-1744, and the telephone number for the docket center is (202) 566-1752. Also, you can send comments to the Office of Information and Regulatory Affairs, Office of Management and Budget, 725 17th Street, NW, Washington, DC 20503, Attention: Desk Officer for EPA. Please include the EPA Docket ID Number EPA-HQ-OECA-2013-0345 and OMB Control Number 2060-0541 in any correspondence.

Part B of the Supporting Statement

This part is not applicable because no statistical methods were used in collecting this information.

Table 1: Annual Respondent Burden and Cost – NESHAP for Metal Can Manufacturing Surface Coating (40 CFR Part 63, Subpart KKKK) (Renewal)

Burden Item	(A) Person hours per occurrence	(B) No. of occurrences per respondent per year	(C) Technical person-hours per respondent per year (AxB)	(D) Respondents per year b	(E) Technical hours per year (CxD)	(F) Management hours per year (Ex0.05)	(G) Clerical hours per year (Ex0.1)	(H) Total cost per year ($) a
1. Reporting Requirements
a. Familiarization with the regulatory requirements	4	1	4	5	20	1	2	$2,372.97
b. Compile and process data	4	4	16	5	80	4	8	$9,491.88
c. Write reports
i. Initial notification	2	1	2	0	0	0	0	$0
ii. Notification of compliance status	2	1	2	0	0	0	0	$0
iii. Notification of construction/reconstruction	2	1	2	0	0	0	0	$0
iv. Notification of actual startup	2	1	2	0	0	0	0	$0
v. Notification of performance test b	2	1.2	2.4	0	0	0	0	$0
vi. Report of performance test c	10	1.2	12	0	0	0	0	$0
vii. Semiannual report	6	2	12	5	60	3	6	$7,118.91
viii. Excess emissions report	2	2	4	5	20	1	2	$2,372.97
ix. Startup, shutdown, malfunction report d	2	1	2	1.25	2.5	0.125	0.25	$296.62
Subtotal for Reporting Requirements					210			$21,653.35
2. Recordkeeping requirements
a. Familiarization with the regulatory requirements	4	1	4	5	20	1	2	$2,372.97
b. Plan activities	12	1	12	5	60	3	6	$7,118.91
c. Implement activities	12	1	12	5	60	3	6	$7,118.91
d. Maintain record system for material used	20	1	20	5	100	5	10	$11,864.85
e. Time to enter information
i. Material usage	0.5	365	182.5	5	912.5	45.625	91.25	$108,266.76
ii. Compliance calculation	2	12	24	5	120	6	12	$14,237.82
f. Time to train personnel	10	1	10	5	50	2.5	5	$5,932.43
g. Store, file, and maintain records	2	12	24	5	120	6	12	$14,237.82
h. Retrieve records/reports	1	12	12	5	60	3	6	$7,118.91
Subtotal for Recordkeeping Requirements					1,728			$178,269.37
TOTAL ANNUAL BURDEN AND COST (ROUNDED) e					1,940			$200,000
Capital and O&M Cost (see Section 6(b)(iii)): e								$6,000
TOTAL COST: e								$206,000

Assumptions:

^a.         This ICR uses the following labor rates: $106.45 for technical, $138.43 for managerial, and $52.77 for clerical labor. These rates are from the United States Department of Labor, Bureau of Labor Statistics, September 2015, “Table 2. Civilian Workers, by occupational and industry group.” The rates are from column 1, “Total compensation.” The rates have been increased by 110 percent to account for the benefit packages available to those employed by private industry.

^b.         We have assumed that the average number of respondents that will be subject to the rule will be 5 existing sources. There will be no additional sources over the three-year period of this ICR.

^c. This ICR assumes a re-test rate of 20 percent.

^d. This ICR assumes 25 percent of facilities use add-on controls and submit startup, shutdown, malfunction reports once per year.

^e. Totals have been rounded to 3 significant figures. Figures may not add exactly due to rounding.

Table 2: Average Annual EPA Burden and Cost – NESHAP for Metal Can Manufacturing Surface Coating (40 CFR Part 63, Subpart KKKK) (Renewal)

Burden Item	(A) EPA hours per occurrence	(B) No. of occurrences per respondent per year	(C) EPA person-hours per respondent per year (AxB)	(D) Plants per year b	(E) Technical hours per year (CxD)	(F) Management hours per year (Ex0.05)	(G) Clerical hours per year (Ex0.1)	(H) Total cost per year a ($)
1. Initial performance test	24	1	24	0	0	0	0	$0
2. Repeat performance test	24	1	24	0	0	0	0	$0
3. Report review
a. Initial notification	8	1	8	0	0	0	0	$0
b. Notification of performance test	8	1.2	10	0	0	0	0	$0
c. Notification of compliance status	8	1	8	0	0	0	0	$0
d. Notification of construction/reconstruction	8	1	8	0	0	0	0	$0
e. Notification of actual startup	8	1	8	0	0	0	0	$0
f. Report of performance test	8	1.2	10	0	0	0	0	$0
g. Semiannual report	12	2	24	5	120	6	12	$6,408.48
h. Excess emissions report	4	2	8	5	40	2	4	$2,136.16
i. Startup, shutdown, report	8	1	8	1.25	10	0.5	1	$534.04
TOTAL ANNUAL BURDEN AND COST (ROUNDED) d					196			$9,080

Assumptions:

^a.         This ICR uses the following labor rates: $47.62 for technical, $64.16 for managerial, and $25.76 for clerical labor. These rates are from the Office of Personnel Management (OPM), 2016 General Schedule, which excludes locality rates of pay. The rates have been increased by 60 percent to account for the benefit packages available to government employees.

^b.         We have assumed that the average number of respondents that will be subject to the rule will be 5 existing sources. There will be no additional sources over the three-year period of this ICR.

^c.         We have assumed that 25 percent of respondents will each take 8 hours once per year to review the startup, shutdown, malfunction report.

^d. Totals have been rounded to 3 significant figures. Figures may not add exactly due to rounding.