| Light-Duty Release 15.0.0.0 Business Rules | ||||||||
| Displaying 951 issues as of September 26th, 2014. | ||||||||
| Key | Compliance Program | Dataset | Business Rule Identifier | Business Rule Text from Previous Release | Business Rule Text for This Release | Target Data Element Number | Production Status | Development Status |
| VERIFY-2987 | Certification Test Data | Fuel Properties | LD-CTD-FP-BR001 | Manufacturer Code (FP-1) must exist in the system. | Manufacturer Code (FP-1) must exist in the system. | (FP-1) | Active | Not Under Development |
| VERIFY-2988 | Certification Test Data | Fuel Properties | LD-CTD-FP-BR002a | If Process Code (FP-0.5) is equal to 'R' (Report) or 'C' (Correction) then a record must already exist in the system with the same Fuel Batch ID (FP-2), Fuel Batch Calibration Number (FP-3), and Manufacturer Code (FP-1). | If Process Code (FP-0.5) is equal to 'R' (Report) or 'C' (Correction) then a record must already exist in the system with the same Fuel Batch ID (FP-2), Fuel Batch Calibration Number (FP-3), and Manufacturer Code (FP-1). | (FP-2) (FP-3) (FP-1) | Active | Not Under Development |
| VERIFY-2989 | Certification Test Data | Fuel Properties | LD-CTD-FP-BR002b | If Process Code (FP-0.5) is equal to 'R' (Report) or 'C' (Correction) then a record must already exist in the system with the same Fuel Batch ID (FP-2), Fuel Batch Calibration Number (FP-3), and Manufacturer Code (FP-1). | If Process Code (FP-0.5) is equal to 'R' (Report) or 'C' (Correction) then a record must already exist in the system with the same Fuel Batch ID (FP-2), Fuel Batch Calibration Number (FP-3), and Manufacturer Code (FP-1). | (FP-2) (FP-3) (FP-1) | Active | Not Under Development |
| VERIFY-3006 | Certification Test Data | Fuel Properties | LD-CTD-FP-BR019 | If the Process Code (FP-0.5) is equal to 'R' (Report) the Manufacturer Code of the Submission Author Details must match the Manufacturer Code of the dataset for which the report was requested. | If the Process Code (FP-0.5) is equal to 'R' (Report) the Manufacturer Code of the Submission Author Details must match the Manufacturer Code of the dataset for which the report was requested. | (FP-1) | Active | Not Under Development |
| VERIFY-3007 | Certification Test Data | Fuel Properties | LD-CTD-FP-BR020 | If the Process Code (FP-0.5) is equal to 'N' (New) or 'C' (Correction) then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code of the submitted dataset. | If the Process Code (FP-0.5) is equal to 'N' (New) or 'C' (Correction) then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code of the submitted dataset. | (FP-1) | Active | Not Under Development |
| VERIFY-3008 | Certification Test Data | Fuel Properties | LD-CTD-FP-BR021 | If the Process Code (FP-0.5) is equal to 'C' (Correction) then there cannot be any active tests, which reference these fuel properties, that are included in any locked Certificate Summary Information Reports (CSIs). | If the Process Code (FP-0.5) is equal to 'C' (Correction) then there cannot be any active tests, which reference these fuel properties, that are included in any locked Certificate Summary Information Reports (CSIs). | (FP-0.5) | Active | Not Under Development |
| VERIFY-3009 | Certification Test Data | Fuel Properties | LD-CTD-FP-BR022 | If the Process Code (FP-0.5) is equal to 'N' (New) then a record cannot already exist in the system with the same Fuel Batch ID (FP-2), Fuel Batch Calibration Number (FP-3), and Manufacturer Code (FP-1). | If the Process Code (FP-0.5) is equal to 'N' (New) then a record cannot already exist in the system with the same Fuel Batch ID (FP-2), Fuel Batch Calibration Number (FP-3), and Manufacturer Code (FP-1). | (FP-2) (FP-3) (FP-1) | Active | Not Under Development |
| VERIFY-3010 | Certification Test Data | Fuel Properties | LD-CTD-FP-BR023 | If Process Code (FP-0.5) is equal to 'C' (Correction) then there cannot be an active Test Information Dataset with the same Fuel Batch ID (FP-2), Fuel Batch Calibration Number (FP-3), and Manufacturer Code (FP-1). | If Process Code (FP-0.5) is equal to 'C' (Correction) then there cannot be an active Test Information Dataset with the same Fuel Batch ID (FP-2), Fuel Batch Calibration Number (FP-3), and Manufacturer Code (FP-1). | (FP-2) (FP-3) (FP-1) (FP-0.5) | Active | Not Under Development |
| VERIFY-22680 | Certification Test Data | Fuel Properties | LD-CTD-FP-BR024 | If Process Code (FP-0.5) equals 'N' (New), then Test Fuel Type (FP-4) must not equal '1' (Indolene 30), '6' (EPA Unleaded Gasoline), '7' (Industrial Unleaded 100 Octane), '8' (Number 1 Fuel Oil), '9' (Cert Diesel 300 ppm Sulfur), '10' (Natural Gas), '24' (Cold CO Regular [Cert]), or '25' (Cold CO Premium [Cert]). | If Process Code (FP-0.5) equals 'N' (New), then Test Fuel Type (FP-4) must not equal '1' (Indolene 30), '6' (EPA Unleaded Gasoline), '7' (Industrial Unleaded 100 Octane), '8' (Number 1 Fuel Oil), '9' (Cert Diesel 300 ppm Sulfur), '10' (Natural Gas), '24' (Cold CO Regular [Cert]), or '25' (Cold CO Premium [Cert]). | (FP-4) | Not in the System | Under Development (To Be Added) |
| VERIFY-10578 | Certification Test Data | Test Information | LD-CTD-TI-BE001 | If Test Category (TI-43) = 'CD' (Charge Depleting), then Certification Level (TI-39) is not to be calculated. | If Test Category (TI-43) = 'CD' (Charge Depleting), then Certification Level (TI-39) is not to be calculated. | (TI-39) | Active | Not Under Development |
| VERIFY-10579 | Certification Test Data | Test Information | LD-CTD-TI-BE002 | If Test Procedure (TI-8) is equal to "Charge Depleting UDDS" (Test Procedure Code = '81'), "Charge Depleting Highway" (Test Procedure Code = '84'), or "Charge Depleting US06" (Test Procedure Code = '83'), then Certification Disposition Code (TI-40) is not allowed (i.e. not calculated). | If Test Procedure (TI-8) is equal to "Charge Depleting UDDS" (Test Procedure Code = '81'), "Charge Depleting Highway" (Test Procedure Code = '84'), or "Charge Depleting US06" (Test Procedure Code = '83'), then Certification Disposition Code (TI-40) is not allowed (i.e. not calculated). | (TI-40) | Active | Not Under Development |
| VERIFY-10580 | Certification Test Data | Test Information | LD-CTD-TI-BE003 | If Test Result/Emission Name (TI-19) is equal to "CREE" or "Opt-CREE", then Certification Disposition Code (TI-40) are not allowed (i.e. not calculated). | If Test Result/Emission Name (TI-19) is equal to "CREE" or "Opt-CREE", then Certification Disposition Code (TI-40) are not allowed (i.e. not calculated). | (TI-40) | Active | Not Under Development |
| VERIFY-3011 | Certification Test Data | Test Information | LD-CTD-TI-BR001 | Manufacturer Code (TI-3) must exist in the system. | Manufacturer Code (TI-3) must exist in the system. | (TI-3) | Active | Not Under Development |
| VERIFY-3012 | Certification Test Data | Test Information | LD-CTD-TI-BR002a | If Process Code (TI-0.5) is equal to 'C' (Correction) and the Original Model Year (VI-7) of the associated vehicle is greater than or equal to 2011, then Test Number (TI-1) is required and a corresponding record must already exist in the system. | If Process Code (TI-0.5) is equal to 'C' (Correction) and the Original Model Year (VI-7) of the associated vehicle is greater than or equal to 2011, then Test Number (TI-1) is required and a corresponding record must already exist in the system. | (TI-1) | Active | Not Under Development |
| VERIFY-3013 | Certification Test Data | Test Information | LD-CTD-TI-BR002b | If Process Code (TI-0.5) is equal to 'C' (Correction) and the Original Model Year (VI-7) of the associated vehicle is greater than or equal to 2011, then Test Number (TI-1) is required and a corresponding record must already exist in the system. | If Process Code (TI-0.5) is equal to 'C' (Correction) and the Original Model Year (VI-7) of the associated vehicle is greater than or equal to 2011, then Test Number (TI-1) is required and a corresponding record must already exist in the system. | (TI-1) | Active | Not Under Development |
| VERIFY-3014 | Certification Test Data | Test Information | LD-CTD-TI-BR003 | If Process Code (TI-0.5) is equal to 'N' (New) or 'C' (Correction) then the Manufacturer Code (TI-3), Vehicle ID (TI-4), and Vehicle Configuration (TI-5) must match to an active vehicle currently in the system. | If Process Code (TI-0.5) is equal to 'N' (New) or 'C' (Correction) then the Manufacturer Code (TI-3), Vehicle ID (TI-4), and Vehicle Configuration (TI-5) must match to an active vehicle currently in the system. | (TI-3) (TI-4) (TI-5) | Active | Not Under Development |
| VERIFY-3015 | Certification Test Data | Test Information | LD-CTD-TI-BR004 | If the submitter's Manufacturer Code (TI-3) is not equal to 'LOD' then LOD Test Number (TI-2) is not allowed. | If the submitter's Manufacturer Code (TI-3) is not equal to 'LOD' then LOD Test Number (TI-2) is not allowed. | (TI-2) | Active | Not Under Development |
| VERIFY-3016 | Certification Test Data | Test Information | LD-CTD-TI-BR005 | Test Date (TI-6) must be earlier than or equal to the Submit Date (as determined by the system). | Test Date (TI-6) must be earlier than or equal to the Submit Date (as determined by the system). | (TI-6) | Active | Not Under Development |
| VERIFY-3017 | Certification Test Data | Test Information | LD-CTD-TI-BR006 | If the submitter's Manufacturer Code (TI-3) is equal to 'LOD' then Verify Test Lab ID (TI-7) is not allowed, otherwise it is required. | If the submitter's Manufacturer Code (TI-3) is equal to 'LOD' then Verify Test Lab ID (TI-7) is not allowed, otherwise it is required. | (TI-7) | Active | Not Under Development |
| VERIFY-3019 | Certification Test Data | Test Information | LD-CTD-TI-BR008a | If Test Procedures (TI-8) is an evaporative test (Test Procedure equal to 23, 24, 27, 32, 34, 37, 38, 43, 44, 47) then the Exhaust/Evaporative Test Number Link (TI-13) is required and must reference an FTP Exhaust test number that already exists in Verify, otherwise it is not allowed. | If Test Procedures (TI-8) is an evaporative test (Test Procedure equal to 23, 24, 27, 32, 34, 37, 38, 43, 44, 47) then the Exhaust/Evaporative Test Number Link (TI-13) is required and must reference an FTP Exhaust test number that already exists in Verify, otherwise it is not allowed. | (TI-13) | Active | Not Under Development |
| VERIFY-3020 | Certification Test Data | Test Information | LD-CTD-TI-BR008b | If Test Procedures (TI-8) is an evaporative test (Test Procedure equal to 23, 24, 27, 32, 34, 37, 38, 43, 44, 47) then the Exhaust/Evaporative Test Number Link (TI-13) is required and must reference an FTP Exhaust test number that already exists in Verify, otherwise it is not allowed. | If Test Procedures (TI-8) is an evaporative test (Test Procedure equal to 23, 24, 27, 32, 34, 37, 38, 43, 44, 47) then the Exhaust/Evaporative Test Number Link (TI-13) is required and must reference an FTP Exhaust test number that already exists in Verify, otherwise it is not allowed. | (TI-13) | Active | Not Under Development |
| VERIFY-3021 | Certification Test Data | Test Information | LD-CTD-TI-BR009 | Fuel Batch Manufacturer Code (TI-16), Fuel Batch Id (TI-17) and Fuel Calibration Number (TI-18), if present, must reference a Fuel Properties data set that exists in the system. | Fuel Batch Manufacturer Code (TI-16), Fuel Batch Id (TI-17) and Fuel Calibration Number (TI-18), if present, must reference a Fuel Properties data set that exists in the system. | (TI-16) (TI-17) (TI-18) | Active | Not Under Development |
| VERIFY-3026 | Certification Test Data | Test Information | LD-CTD-TI-BR016a | The Test Result/Emission Name (TI-19) cannot contain 'CO-comp' (CO SFTP Composite) or 'HC-NM+NOx-comp' (NMHC+NOX SFTP Composite). | The Test Result/Emission Name (TI-19) cannot contain 'CO-comp' (CO SFTP Composite) or 'HC-NM+NOx-comp' (NMHC+NOX SFTP Composite). | (TI-19) | Active | Not Under Development |
| VERIFY-8061 | Certification Test Data | Test Information | LD-CTD-TI-BR016b | The Test Result/Emission Name (TI-19) cannot contain 'CO-comp' (CO SFTP Composite) or 'HC-NM+NOx-comp' (NMHC+NOX SFTP Composite). | The Test Result/Emission Name (TI-19) cannot contain 'CO-comp' (CO SFTP Composite) or 'HC-NM+NOx-comp' (NMHC+NOX SFTP Composite). | (TI-19) | Active | Not Under Development |
| VERIFY-3027 | Certification Test Data | Test Information | LD-CTD-TI-BR017 | If the Process Code (TI-0.5) is equal to 'R' (Report) the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (TI-3) of the dataset for which the report was requested. | If the Process Code (TI-0.5) is equal to 'R' (Report) the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (TI-3) of the dataset for which the report was requested. | (TI-3) | Active | Not Under Development |
| VERIFY-3031 | Certification Test Data | Test Information | LD-CTD-TI-BR021a | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is equal to '9' (Cert Diesel 300 ppm Sulfur), '18' (CARB Cert Diesel 7-15 ppm Sulfur), or '19' (Federal Cert Diesel 7-15 PPM Sulfur), and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL' (Total Hydrocarbon), 'CO' (Carbon Monoxide), and 'CO2' (Carbon Dioxide). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is equal to '9' (Cert Diesel 300 ppm Sulfur), '18' (CARB Cert Diesel 7-15 ppm Sulfur), or '19' (Federal Cert Diesel 7-15 PPM Sulfur), and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL' (Total Hydrocarbon), 'CO' (Carbon Monoxide), and 'CO2' (Carbon Dioxide). | (TI-19) | Active | Not Under Development |
| VERIFY-8055 | Certification Test Data | Test Information | LD-CTD-TI-BR021b | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is equal to '9' (Cert Diesel 300 ppm Sulfur), '18' (CARB Cert Diesel 7-15 ppm Sulfur), or '19' (Federal Cert Diesel 7-15 PPM Sulfur), and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL' (Total Hydrocarbon), 'CO' (Carbon Monoxide), and 'CO2' (Carbon Dioxide). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is equal to '9' (Cert Diesel 300 ppm Sulfur), '18' (CARB Cert Diesel 7-15 ppm Sulfur), or '19' (Federal Cert Diesel 7-15 PPM Sulfur), and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL' (Total Hydrocarbon), 'CO' (Carbon Monoxide), and 'CO2' (Carbon Dioxide). | (TI-19) | Active | Not Under Development |
| VERIFY-3032 | Certification Test Data | Test Information | LD-CTD-TI-BR022a | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is one of the ethanol fuel types (36, 37, 38, 43, 44, 45, 71), and the Test Procedure (TI-8) requires el Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL' (Total Hydrocarbon), 'CO' (Carbon Monoxide), and 'CO2' (Carbon Dioxide), 'METHANOL', 'HCHO' (Formaldehyde), 'ETHANOL', and "H3C2HO' (Acetaldehyde); and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is one of the ethanol fuel types (36, 37, 38, 43, 44, 45, 71), and the Test Procedure (TI-8) requires el Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL' (Total Hydrocarbon), 'CO' (Carbon Monoxide), and 'CO2' (Carbon Dioxide), 'METHANOL', 'HCHO' (Formaldehyde), 'ETHANOL', and "H3C2HO' (Acetaldehyde); and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15). | (TI-19) (FP-13) (FP-15) | Active | Not Under Development |
| VERIFY-3033 | Certification Test Data | Test Information | LD-CTD-TI-BR022b | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is one of the ethanol fuel types (36, 37, 38, 43, 44, 45, 71), and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL' (Total Hydrocarbon), 'CO' (Carbon Monoxide), and 'CO2' (Carbon Dioxide), 'METHANOL', 'HCHO' (Formaldehyde), 'ETHANOL', and "H3C2HO' (Acetaldehyde); and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is one of the ethanol fuel types (36, 37, 38, 43, 44, 45, 71), and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL' (Total Hydrocarbon), 'CO' (Carbon Monoxide), and 'CO2' (Carbon Dioxide), 'METHANOL', 'HCHO' (Formaldehyde), 'ETHANOL', and "H3C2HO' (Acetaldehyde); and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15). | (TI-19) (FP-13) (FP-15) | Active | Not Under Development |
| VERIFY-3034 | Certification Test Data | Test Information | LD-CTD-TI-BR022c | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is one of the ethanol fuel types (36, 37, 38, 43, 44, 45, 71), and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL' (Total Hydrocarbon), 'CO' (Carbon Monoxide), and 'CO2' (Carbon Dioxide), 'METHANOL', 'HCHO' (Formaldehyde), 'ETHANOL', and "H3C2HO' (Acetaldehyde); and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is one of the ethanol fuel types (36, 37, 38, 43, 44, 45, 71), and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL' (Total Hydrocarbon), 'CO' (Carbon Monoxide), and 'CO2' (Carbon Dioxide), 'METHANOL', 'HCHO' (Formaldehyde), 'ETHANOL', and "H3C2HO' (Acetaldehyde); and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15). | (TI-19) (FP-13) (FP-15) | Active | Not Under Development |
| VERIFY-8056 | Certification Test Data | Test Information | LD-CTD-TI-BR022d | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is one of the ethanol fuel types (36, 37, 38, 43, 44, 45, 71), and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL' (Total Hydrocarbon), 'CO' (Carbon Monoxide), and 'CO2' (Carbon Dioxide), 'METHANOL', 'HCHO' (Formaldehyde), 'ETHANOL', and "H3C2HO' (Acetaldehyde); and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is one of the ethanol fuel types (36, 37, 38, 43, 44, 45, 71), and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL' (Total Hydrocarbon), 'CO' (Carbon Monoxide), and 'CO2' (Carbon Dioxide), 'METHANOL', 'HCHO' (Formaldehyde), 'ETHANOL', and "H3C2HO' (Acetaldehyde); and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15). | (TI-19) (FP-13) (FP-15) | Active | Not Under Development |
| VERIFY-3035 | Certification Test Data | Test Information | LD-CTD-TI-BR023a | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '42' (LPG) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '42' (LPG) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15). | (TI-19) (FP-13) (FP-15) | Active | Not Under Development |
| VERIFY-3036 | Certification Test Data | Test Information | LD-CTD-TI-BR023b | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '42' (LPG) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '42' (LPG) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15). | (TI-19) (FP-13) (FP-15) | Active | Not Under Development |
| VERIFY-3037 | Certification Test Data | Test Information | LD-CTD-TI-BR023c | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '42' (LPG) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '42' (LPG) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15). | (TI-19) (FP-13) (FP-15) | Active | Not Under Development |
| VERIFY-8067 | Certification Test Data | Test Information | LD-CTD-TI-BR023d | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '42' (LPG) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '42' (LPG) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15). | (TI-19) (FP-13) (FP-15) | Active | Not Under Development |
| VERIFY-3038 | Certification Test Data | Test Information | LD-CTD-TI-BR024a | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) equals '1' (Indolene 30), '6' (EPA Unleaded), '7' (Industrial Unleaded 100 Octane), '8' (Number 1 Fuel Oil), '22' (Special Unleaded 91 RON), '24' (Cold CO Regular Cert), '25' (Cold CO Premium Cert), '26' (Cold CO Regular Tier 2), '27' (Cold CO Premium Tier 2), '46' (CARB LEV3 E10 Regular Gasoline), '47' (CARB LEV3 E10 Premium Gasoline), or '61' (Tier 2 Unleaded) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL' (Total Hydrocarbon), 'CO' (Carbon Monoxide), and 'CO2' (Carbon Dioxide); and Fuel Batch Manufacturer Code (TI-16), Fuel Batch ID (TI-17), and Fuel Calibration Number (TI-18) are required and must specify a Fuel Properties submission in which the following fields exist: Fuel Specific Gravity (FP-13), Fuel Blend Carbon Weight Fraction (FP-15), and Fuel Net Heating Value (FP-14). (Please submit required Test Result/Emission Names) | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) equals '1' (Indolene 30), '6' (EPA Unleaded), '7' (Industrial Unleaded 100 Octane), '8' (Number 1 Fuel Oil), '22' (Special Unleaded 91 RON), '24' (Cold CO Regular Cert), '25' (Cold CO Premium Cert), '26' (Cold CO Regular Tier 2), '27' (Cold CO Premium Tier 2), '46' (CARB LEV3 E10 Regular Gasoline), '47' (CARB LEV3 E10 Premium Gasoline), or '61' (Tier 2 Unleaded) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL' (Total Hydrocarbon), 'CO' (Carbon Monoxide), and 'CO2' (Carbon Dioxide); and Fuel Batch Manufacturer Code (TI-16), Fuel Batch ID (TI-17), and Fuel Calibration Number (TI-18) are required and must specify a Fuel Properties submission in which the following fields exist: Fuel Specific Gravity (FP-13), Fuel Blend Carbon Weight Fraction (FP-15), and Fuel Net Heating Value (FP-14). (Please submit required Test Result/Emission Names) | (TI-19) (FP-13) (FP-15) (FP-14) | Active | Not Under Development |
| VERIFY-3039 | Certification Test Data | Test Information | LD-CTD-TI-BR024b | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) equals '1' (Indolene 30), '6' (EPA Unleaded), '7' (Industrial Unleaded 100 Octane), '8' (Number 1 Fuel Oil), '22' (Special Unleaded 91 RON), '24' (Cold CO Regular Cert), '25' (Cold CO Premium Cert), '26' (Cold CO Regular Tier 2), '27' (Cold CO Premium Tier 2), '46' (CARB LEV3 E10 Regular Gasoline), '47' (CARB LEV3 E10 Premium Gasoline), or '61' (Tier 2 Unleaded) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL' (Total Hydrocarbon), 'CO' (Carbon Monoxide), and 'CO2' (Carbon Dioxide); and Fuel Batch Manufacturer Code (TI-16), Fuel Batch ID (TI-17), and Fuel Calibration Number (TI-18) are required and must specify a Fuel Properties submission in which the following fields exist: Fuel Specific Gravity (FP-13), Fuel Blend Carbon Weight Fraction (FP-15), and Fuel Net Heating Value (FP-14). (Please submit required Test Result/Emission Names) | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) equals '1' (Indolene 30), '6' (EPA Unleaded), '7' (Industrial Unleaded 100 Octane), '8' (Number 1 Fuel Oil), '22' (Special Unleaded 91 RON), '24' (Cold CO Regular Cert), '25' (Cold CO Premium Cert), '26' (Cold CO Regular Tier 2), '27' (Cold CO Premium Tier 2), '46' (CARB LEV3 E10 Regular Gasoline), '47' (CARB LEV3 E10 Premium Gasoline), or '61' (Tier 2 Unleaded) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL' (Total Hydrocarbon), 'CO' (Carbon Monoxide), and 'CO2' (Carbon Dioxide); and Fuel Batch Manufacturer Code (TI-16), Fuel Batch ID (TI-17), and Fuel Calibration Number (TI-18) are required and must specify a Fuel Properties submission in which the following fields exist: Fuel Specific Gravity (FP-13), Fuel Blend Carbon Weight Fraction (FP-15), and Fuel Net Heating Value (FP-14). (Please submit required Test Result/Emission Names) | (TI-19) (FP-13) (FP-15) (FP-14) | Active | Not Under Development |
| VERIFY-3040 | Certification Test Data | Test Information | LD-CTD-TI-BR024c | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) equals '1' (Indolene 30), '6' (EPA Unleaded), '7' (Industrial Unleaded 100 Octane), '8' (Number 1 Fuel Oil), '22' (Special Unleaded 91 RON), '24' (Cold CO Regular Cert), '25' (Cold CO Premium Cert), '26' (Cold CO Regular Tier 2), '27' (Cold CO Premium Tier 2), '46' (CARB LEV3 E10 Regular Gasoline), '47' (CARB LEV3 E10 Premium Gasoline), or '61' (Tier 2 Unleaded) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL' (Total Hydrocarbon), 'CO' (Carbon Monoxide), and 'CO2' (Carbon Dioxide); and Fuel Batch Manufacturer Code (TI-16), Fuel Batch ID (TI-17), and Fuel Calibration Number (TI-18) are required and must specify a Fuel Properties submission in which the following fields exist: Fuel Specific Gravity (FP-13), Fuel Blend Carbon Weight Fraction (FP-15), and Fuel Net Heating Value (FP-14). (Please submit required Test Result/Emission Names) | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) equals '1' (Indolene 30), '6' (EPA Unleaded), '7' (Industrial Unleaded 100 Octane), '8' (Number 1 Fuel Oil), '22' (Special Unleaded 91 RON), '24' (Cold CO Regular Cert), '25' (Cold CO Premium Cert), '26' (Cold CO Regular Tier 2), '27' (Cold CO Premium Tier 2), '46' (CARB LEV3 E10 Regular Gasoline), '47' (CARB LEV3 E10 Premium Gasoline), or '61' (Tier 2 Unleaded) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL' (Total Hydrocarbon), 'CO' (Carbon Monoxide), and 'CO2' (Carbon Dioxide); and Fuel Batch Manufacturer Code (TI-16), Fuel Batch ID (TI-17), and Fuel Calibration Number (TI-18) are required and must specify a Fuel Properties submission in which the following fields exist: Fuel Specific Gravity (FP-13), Fuel Blend Carbon Weight Fraction (FP-15), and Fuel Net Heating Value (FP-14). (Please submit required Test Result/Emission Names) | (TI-19) (FP-13) (FP-15) (FP-14) | Active | Not Under Development |
| VERIFY-8059 | Certification Test Data | Test Information | LD-CTD-TI-BR024d | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) equals '1' (Indolene 30), '6' (EPA Unleaded), '7' (Industrial Unleaded 100 Octane), '8' (Number 1 Fuel Oil), '22' (Special Unleaded 91 RON), '24' (Cold CO Regular Cert), '25' (Cold CO Premium Cert), '26' (Cold CO Regular Tier 2), '27' (Cold CO Premium Tier 2), '46' (CARB LEV3 E10 Regular Gasoline), '47' (CARB LEV3 E10 Premium Gasoline), or '61' (Tier 2 Unleaded) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL' (Total Hydrocarbon), 'CO' (Carbon Monoxide), and 'CO2' (Carbon Dioxide); and Fuel Batch Manufacturer Code (TI-16), Fuel Batch ID (TI-17), and Fuel Calibration Number (TI-18) are required and must specify a Fuel Properties submission in which the following fields exist: Fuel Specific Gravity (FP-13), Fuel Blend Carbon Weight Fraction (FP-15), and Fuel Net Heating Value (FP-14). (Please submit required Test Result/Emission Names) | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) equals '1' (Indolene 30), '6' (EPA Unleaded), '7' (Industrial Unleaded 100 Octane), '8' (Number 1 Fuel Oil), '22' (Special Unleaded 91 RON), '24' (Cold CO Regular Cert), '25' (Cold CO Premium Cert), '26' (Cold CO Regular Tier 2), '27' (Cold CO Premium Tier 2), '46' (CARB LEV3 E10 Regular Gasoline), '47' (CARB LEV3 E10 Premium Gasoline), or '61' (Tier 2 Unleaded) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL' (Total Hydrocarbon), 'CO' (Carbon Monoxide), and 'CO2' (Carbon Dioxide); and Fuel Batch Manufacturer Code (TI-16), Fuel Batch ID (TI-17), and Fuel Calibration Number (TI-18) are required and must specify a Fuel Properties submission in which the following fields exist: Fuel Specific Gravity (FP-13), Fuel Blend Carbon Weight Fraction (FP-15), and Fuel Net Heating Value (FP-14). (Please submit required Test Result/Emission Names) | (TI-19) (FP-13) (FP-15) (FP-14) | Active | Not Under Development |
| VERIFY-3041 | Certification Test Data | Test Information | LD-CTD-TI-BR025a | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '10' (Natural Gas) or '41' (CNG) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-NM', 'METHANE', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Carbon Weight Fraction NMHC (FP-8), Carbon Weight Fraction HC (FP-9), Fuel Blend Carbon Weight Fraction (FP-15), Fuel Density (FP-12) and Weight Fraction CO2 (FP-16). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '10' (Natural Gas) or '41' (CNG) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-NM', 'METHANE', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Carbon Weight Fraction NMHC (FP-8), Carbon Weight Fraction HC (FP-9), Fuel Blend Carbon Weight Fraction (FP-15), Fuel Density (FP-12) and Weight Fraction CO2 (FP-16). | (TI-19) (FP-8) (FP-9) (FP-15) (FP-12) (FP-16) | Active | Not Under Development |
| VERIFY-3042 | Certification Test Data | Test Information | LD-CTD-TI-BR025b | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '10' (Natural Gas) or '41' (CNG) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-NM', 'METHANE', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Carbon Weight Fraction NMHC (FP-8), Carbon Weight Fraction HC (FP-9), Fuel Blend Carbon Weight Fraction (FP-15), Fuel Density (FP-12) and Weight Fraction CO2 (FP-16). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '10' (Natural Gas) or '41' (CNG) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-NM', 'METHANE', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Carbon Weight Fraction NMHC (FP-8), Carbon Weight Fraction HC (FP-9), Fuel Blend Carbon Weight Fraction (FP-15), Fuel Density (FP-12) and Weight Fraction CO2 (FP-16). | (TI-19) (FP-8) (FP-9) (FP-15) (FP-12) (FP-16) | Active | Not Under Development |
| VERIFY-3043 | Certification Test Data | Test Information | LD-CTD-TI-BR025c | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '10' (Natural Gas) or '41' (CNG) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-NM', 'METHANE', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Carbon Weight Fraction NMHC (FP-8), Carbon Weight Fraction HC (FP-9), Fuel Blend Carbon Weight Fraction (FP-15), Fuel Density (FP-12) and Weight Fraction CO2 (FP-16). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '10' (Natural Gas) or '41' (CNG) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-NM', 'METHANE', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Carbon Weight Fraction NMHC (FP-8), Carbon Weight Fraction HC (FP-9), Fuel Blend Carbon Weight Fraction (FP-15), Fuel Density (FP-12) and Weight Fraction CO2 (FP-16). | (TI-19) (FP-8) (FP-9) (FP-15) (FP-12) (FP-16) | Active | Not Under Development |
| VERIFY-8060 | Certification Test Data | Test Information | LD-CTD-TI-BR025d | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '10' (Natural Gas) or '41' (CNG) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-NM', 'METHANE', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Carbon Weight Fraction NMHC (FP-8), Carbon Weight Fraction HC (FP-9), Fuel Blend Carbon Weight Fraction (FP-15), Fuel Density (FP-12) and Weight Fraction CO2 (FP-16). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '10' (Natural Gas) or '41' (CNG) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-NM', 'METHANE', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Carbon Weight Fraction NMHC (FP-8), Carbon Weight Fraction HC (FP-9), Fuel Blend Carbon Weight Fraction (FP-15), Fuel Density (FP-12) and Weight Fraction CO2 (FP-16). | (TI-19) (FP-8) (FP-9) (FP-15) (FP-12) (FP-16) | Active | Not Under Development |
| VERIFY-3044 | Certification Test Data | Test Information | LD-CTD-TI-BR026a | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '23' (CARB Phase II Gasoline) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15), and Fuel Net Heating Value (FP-14). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '23' (CARB Phase II Gasoline) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15), and Fuel Net Heating Value (FP-14). | (TI-19) (FP-13) (FP-15) (FP-14) | Active | Not Under Development |
| VERIFY-3045 | Certification Test Data | Test Information | LD-CTD-TI-BR026b | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '23' (CARB Phase II Gasoline) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15), and Fuel Net Heating Value (FP-14). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '23' (CARB Phase II Gasoline) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15), and Fuel Net Heating Value (FP-14). | (TI-19) (FP-13) (FP-15) (FP-14) | Active | Not Under Development |
| VERIFY-3046 | Certification Test Data | Test Information | LD-CTD-TI-BR026c | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '23' (CARB Phase II Gasoline) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15), and Fuel Net Heating Value (FP-14). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '23' (CARB Phase II Gasoline) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15), and Fuel Net Heating Value (FP-14). | (TI-19) (FP-13) (FP-15) (FP-14) | Active | Not Under Development |
| VERIFY-8062 | Certification Test Data | Test Information | LD-CTD-TI-BR026d | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '23' (CARB Phase II Gasoline) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15), and Fuel Net Heating Value (FP-14). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No), Test Fuel Type (TI-9) is '23' (CARB Phase II Gasoline) and the Test Procedure (TI-8) requires Fuel Economy to be calculated (2, 3, 11, 21, 25, 31, 35, 41, 45, 81, 83, 84, 85, 86, 90, 95), then Test Results must be submitted with the following Test Result/Emission Names (TI-19): 'HC-TOTAL', 'CO', and 'CO2'; and the following fields must exist in the Fuel Properties submission associated with the Test Information: Fuel Specific Gravity (FP-13) and Fuel Blend Carbon Weight Fraction (FP-15), and Fuel Net Heating Value (FP-14). | (TI-19) (FP-13) (FP-15) (FP-14) | Active | Not Under Development |
| VERIFY-3047 | Certification Test Data | Test Information | LD-CTD-TI-BR027 | If the Process Code (TI-0.5) is 'C' (Correction) then there cannot be any locked and active Certificate Summary Information Reports (CSIs) which reference this test. | If the Process Code (TI-0.5) is 'C' (Correction) then there cannot be any locked and active Certificate Summary Information Reports (CSIs) which reference this test. | (TI-0.5) | Active | Not Under Development |
| VERIFY-3048 | Certification Test Data | Test Information | LD-CTD-TI-BR028 | If Test Fuel Type (TI-9) is equal to '9' (Cert Diesel 300 ppm Sulfur), '18' (CARB Cert Diesel 7-15 ppm Sulfur), or '19' (Federal Cert Diesel 7-15 ppm Sulfur), then the Diesel Adjustment Factor Indicator (TI-18.5) is required, otherwise it is optional. | If Test Fuel Type (TI-9) is equal to '9' (Cert Diesel 300 ppm Sulfur), '18' (CARB Cert Diesel 7-15 ppm Sulfur), or '19' (Federal Cert Diesel 7-15 ppm Sulfur), then the Diesel Adjustment Factor Indicator (TI-18.5) is required, otherwise it is optional. | (TI-18.5) | Active | Not Under Development |
| VERIFY-3049 | Certification Test Data | Test Information | LD-CTD-TI-BR029 | If the Process Code (TI-0.5) is equal to 'N' (New) or 'C' (Correction) then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (TI-3) of the submitted dataset unless the submitter is LOD. | If the Process Code (TI-0.5) is equal to 'N' (New) or 'C' (Correction) then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (TI-3) of the submitted dataset unless the submitter is LOD. | (TI-3) | Active | Not Under Development |
| VERIFY-3050 | Certification Test Data | Test Information | LD-CTD-TI-BR030 | If Process Code (TI-0.5) is equal to 'R' (Report) then Test Number (TI-1) is required and a corresponding record must already exist in the system. | If Process Code (TI-0.5) is equal to 'R' (Report) then Test Number (TI-1) is required and a corresponding record must already exist in the system. | (TI-1) | Active | Not Under Development |
| VERIFY-3051 | Certification Test Data | Test Information | LD-CTD-TI-BR031 | If Process Code (TI-0.5) is equal to 'N' (New) then Test Number (TI-1) is not allowed. | If Process Code (TI-0.5) is equal to 'N' (New) then Test Number (TI-1) is not allowed. | (TI-1) | Active | Not Under Development |
| VERIFY-3054 | Certification Test Data | Test Information | LD-CTD-TI-BR033 | If the Test Procedure (TI-8) is an ORVR (24 or 44) or Running Loss (32 or 37) test, then a Test Result/Emission Name (TI-19) of 'HC-TOTAL' is not allowed. | If the Test Procedure (TI-8) is an ORVR (24 or 44) or Running Loss (32 or 37) test, then a Test Result/Emission Name (TI-19) of 'HC-TOTAL' is not allowed. | (TI-19) | Active | Not Under Development |
| VERIFY-3055 | Certification Test Data | Test Information | LD-CTD-TI-BR034a | The Test Result/Emission Name (TI-19) of 'HC' is only allowed for ORVR (Test Procedure (TI-8) equal to 24 or 44) or Running Loss (Test Procedure (TI-8) equal to 32 or 37) tests. | The Test Result/Emission Name (TI-19) of 'HC' is only allowed for ORVR (Test Procedure (TI-8) equal to 24 or 44) or Running Loss (Test Procedure (TI-8) equal to 32 or 37) tests. | (TI-19) | Active | Not Under Development |
| VERIFY-3056 | Certification Test Data | Test Information | LD-CTD-TI-BR035a | Each Test Result/Emission Name (TI-19) must be a unique value." | Each Test Result/Emission Name (TI-19) must be a unique value." | (TI-19) | Active | Not Under Development |
| VERIFY-5845 | Certification Test Data | Test Information | LD-CTD-TI-BR035b | Each Test Result/Emission Name (TI-19) must be a unique value." | Each Test Result/Emission Name (TI-19) must be a unique value." | (TI-19) | Active | Not Under Development |
| VERIFY-3057 | Certification Test Data | Test Information | LD-CTD-TI-BR036 | If the submitter's Manufacturer Code (TI-3) is equal to 'LOD' and Process Code (TI-0.5) is equal to 'C' (Correction) then Test Number (TI-1) is required and a corresponding record must already exist in the system. | If the submitter's Manufacturer Code (TI-3) is equal to 'LOD' and Process Code (TI-0.5) is equal to 'C' (Correction) then Test Number (TI-1) is required and a corresponding record must already exist in the system. | (TI-1) | Active | Not Under Development |
| VERIFY-3058 | Certification Test Data | Test Information | LD-CTD-TI-BR037 | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No) and Test Procedure Code (TI-8) is equal to 90 (US06) or 95 (SC03), then at least one of the following options must be met: Option 1: The submission must either contain a HC-NM+NOX emission result (TI-19) or a HC-NM emission result (TI-19) and a NOX emission result (TI-19). Option 2: The submission must either contain a NMOG+NOX emissions result (TI-19) or a NMOG emission result (TI-19) and a NOX emission result (TI-19). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'N' (No) and Test Procedure Code (TI-8) is equal to 90 (US06) or 95 (SC03), then at least one of the following options must be met: Option 1: The submission must either contain a HC-NM+NOX emission result (TI-19) or a HC-NM emission result (TI-19) and a NOX emission result (TI-19). Option 2: The submission must either contain a NMOG+NOX emissions result (TI-19) or a NMOG emission result (TI-19) and a NOX emission result (TI-19). | (TI-19) | Active | Not Under Development |
| VERIFY-3317 | Certification Test Data | Test Information | LD-CTD-TI-BR038 | If Original Test Vehicle Model Year (VI-7) is equal to or greater than 2012 and if any values selected for Test Result/Emission Name (TI-19) are equal to 'MFR FE' (Manufacturer Fuel Economy) or 'FE BAG 1' (Bag 1 Fuel Economy) or 'FE BAG 2' (Bag 2 Fuel Economy) or 'FE BAG 3' (Bag 3 Fuel Economy) or 'FE BAG 4' (Bag 4 Fuel Economy), then Fuel Economy Value Unit (TI-20.5) is required, otherwise it is optional. | If Original Test Vehicle Model Year (VI-7) is equal to or greater than 2012 and if any values selected for Test Result/Emission Name (TI-19) are equal to 'MFR FE' (Manufacturer Fuel Economy) or 'FE BAG 1' (Bag 1 Fuel Economy) or 'FE BAG 2' (Bag 2 Fuel Economy) or 'FE BAG 3' (Bag 3 Fuel Economy) or 'FE BAG 4' (Bag 4 Fuel Economy), then Fuel Economy Value Unit (TI-20.5) is required, otherwise it is optional. | (TI-20.5) | Active | Not Under Development |
| VERIFY-3318 | Certification Test Data | Test Information | LD-CTD-TI-BR039 | If Test Fuel Type (TI-9) is equal to 'Hydrogen' (Test Fuel Type = '50') and Fuel Cell Indicator (VI-11.4) is equal to 'Y' (Yes), then Fuel Economy Value Unit (TI-20.5) must be equal to 'MPK'. | If Test Fuel Type (TI-9) is equal to 'Hydrogen' (Test Fuel Type = '50') and Fuel Cell Indicator (VI-11.4) is equal to 'Y' (Yes), then Fuel Economy Value Unit (TI-20.5) must be equal to 'MPK'. | (TI-20.5) | Active | Not Under Development |
| VERIFY-3320 | Certification Test Data | Test Information | LD-CTD-TI-BR041 | If Original Test Vehicle Model Year (VI-7) is equal to or greater than '2012' and if Retest Indicator (TI-22) is equal to 'Y' (Yes), then Manufacturer Verify Test Number That Was Retested (TI-22.1) is required for Tests submitted by Manufacturers, otherwise it is not allowed. It is optional for tests submitted by LOD. | If Original Test Vehicle Model Year (VI-7) is equal to or greater than '2012' and if Retest Indicator (TI-22) is equal to 'Y' (Yes), then Manufacturer Verify Test Number That Was Retested (TI-22.1) is required for Tests submitted by Manufacturers, otherwise it is not allowed. It is optional for tests submitted by LOD. | (TI-22.1) | Active | Not Under Development |
| VERIFY-3321 | Certification Test Data | Test Information | LD-CTD-TI-BR042 | Test Date (TI-6) of the test being submitted must be equal to or later than the Test Date (TI-6) of the Manufacturer Verify Test Number That Was Retested (TI-22.1). | Test Date (TI-6) of the test being submitted must be equal to or later than the Test Date (TI-6) of the Manufacturer Verify Test Number That Was Retested (TI-22.1). | (TI-6) (TI-22.1) | Active | Not Under Development |
| VERIFY-3322 | Certification Test Data | Test Information | LD-CTD-TI-BR043 | If Original Test Vehicle Model Year (VI-7) is equal to or greater than '2012', then Test Procedure (TI-8) can not be equal to '62' (Electric Vehicle Urban Range Test) or '63' (Electric Vehicle Highway Range Test). | If Original Test Vehicle Model Year (VI-7) is equal to or greater than '2012', then Test Procedure (TI-8) can not be equal to '62' (Electric Vehicle Urban Range Test) or '63' (Electric Vehicle Highway Range Test). | (TI-8) | Active | Not Under Development |
| VERIFY-3323 | Certification Test Data | Test Information | LD-CTD-TI-BR044 | If Retest Indicator (TI-22) is equal to 'Y' (Yes), then Retest Reason (TI-23) is required, otherwise it is not allowed. | If Retest Indicator (TI-22) is equal to 'Y' (Yes), then Retest Reason (TI-23) is required, otherwise it is not allowed. | (TI-23) | Active | Not Under Development |
| VERIFY-3324 | Certification Test Data | Test Information | LD-CTD-TI-BR045 | For tests submitted by manufacturers, Retest Reason (TI-23) can only be equal to '1' (Failed(F)), '2' (Void (V)), or '3' (FE(FE)). | For tests submitted by manufacturers, Retest Reason (TI-23) can only be equal to '1' (Failed(F)), '2' (Void (V)), or '3' (FE(FE)). | (TI-23) | Active | Not Under Development |
| VERIFY-3325 | Certification Test Data | Test Information | LD-CTD-TI-BR046 | If Hybrid Indicator (VI-10.6) or Fuel Cell Indicator (VI-11.4) is equal to 'Y' (Yes), and, if Test Procedure (TI-8) is equal to 3 (HWFE), 90 (US06), 95 (SC03) or the following FTP Test Procedures (2, 21, 25, 31, 35, 41, or 45), then State of Charge Delta Indicator (TI-24) is required, otherwise it is optional. | If Hybrid Indicator (VI-10.6) or Fuel Cell Indicator (VI-11.4) is equal to 'Y' (Yes), and, if Test Procedure (TI-8) is equal to 3 (HWFE), 90 (US06), 95 (SC03) or the following FTP Test Procedures (2, 21, 25, 31, 35, 41, or 45), then State of Charge Delta Indicator (TI-24) is required, otherwise it is optional. | (TI-24) | Active | Not Under Development |
| VERIFY-3326 | Certification Test Data | Test Information | LD-CTD-TI-BR047a | If Test Category (TI-43) equals 'Charge Depleting' as determined by the Test Procedure (TI-8), then Test Result/Emission Names (TI-19) with Integrated Amp-hours, System Start State of Charge kiloWatt-hours, System End State of Charge kiloWatt-hours, Actual Distance Driven (miles) and Average System Voltage are required, otherwise they are not allowed. | If Test Category (TI-43) equals 'Charge Depleting' as determined by the Test Procedure (TI-8), then Test Result/Emission Names (TI-19) with Integrated Amp-hours, System Start State of Charge kiloWatt-hours, System End State of Charge kiloWatt-hours, Actual Distance Driven (miles) and Average System Voltage are required, otherwise they are not allowed. | (TI-19) | Active | Not Under Development |
| VERIFY-5846 | Certification Test Data | Test Information | LD-CTD-TI-BR047b | If Test Category (TI-43) equals 'Charge Depleting' as determined by the Test Procedure (TI-8), then Test Result/Emission Names (TI-19) with Integrated Amp-hours, System Start State of Charge kiloWatt-hours, System End State of Charge kiloWatt-hours, Actual Distance Driven (miles) and Average System Voltage are required, otherwise they are not allowed. | If Test Category (TI-43) equals 'Charge Depleting' as determined by the Test Procedure (TI-8), then Test Result/Emission Names (TI-19) with Integrated Amp-hours, System Start State of Charge kiloWatt-hours, System End State of Charge kiloWatt-hours, Actual Distance Driven (miles) and Average System Voltage are required, otherwise they are not allowed. | (TI-19) | Active | Not Under Development |
| VERIFY-3328 | Certification Test Data | Test Information | LD-CTD-TI-BR049a | If Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 1' (Bag 1 Fuel Economy) is submitted then Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 2' (Bag 2 Fuel Economy) must also be submitted. | If Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 1' (Bag 1 Fuel Economy) is submitted then Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 2' (Bag 2 Fuel Economy) must also be submitted. | (TI-19) | Active | Not Under Development |
| VERIFY-8063 | Certification Test Data | Test Information | LD-CTD-TI-BR049b | If Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 1' (Bag 1 Fuel Economy) is submitted then Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 2' (Bag 2 Fuel Economy) must also be submitted. | If Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 1' (Bag 1 Fuel Economy) is submitted then Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 2' (Bag 2 Fuel Economy) must also be submitted. | (TI-19) | Active | Not Under Development |
| VERIFY-3329 | Certification Test Data | Test Information | LD-CTD-TI-BR050a | If Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 2' (Bag 2 Fuel Economy) is submitted then Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 1' (Bag 1 Fuel Economy) must also be submitted. | If Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 2' (Bag 2 Fuel Economy) is submitted then Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 1' (Bag 1 Fuel Economy) must also be submitted. | (TI-19) | Active | Not Under Development |
| VERIFY-8064 | Certification Test Data | Test Information | LD-CTD-TI-BR050b | If Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 2' (Bag 2 Fuel Economy) is submitted then Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 1' (Bag 1 Fuel Economy) must also be submitted. | If Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 2' (Bag 2 Fuel Economy) is submitted then Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 1' (Bag 1 Fuel Economy) must also be submitted. | (TI-19) | Active | Not Under Development |
| VERIFY-3330 | Certification Test Data | Test Information | LD-CTD-TI-BR051a | If Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 3' (Bag 3 Fuel Economy) is submitted then Test Results with Test Result/Emission Names (TI-19) equal to 'FE BAG 1' (Bag 1 Fuel Economy) and 'FE BAG 2' (Bag 2 Fuel Economy) must also be submitted. | If Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 3' (Bag 3 Fuel Economy) is submitted then Test Results with Test Result/Emission Names (TI-19) equal to 'FE BAG 1' (Bag 1 Fuel Economy) and 'FE BAG 2' (Bag 2 Fuel Economy) must also be submitted. | (TI-19) | Active | Not Under Development |
| VERIFY-8065 | Certification Test Data | Test Information | LD-CTD-TI-BR051b | If Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 3' (Bag 3 Fuel Economy) is submitted then Test Results with Test Result/Emission Names (TI-19) equal to 'FE BAG 1' (Bag 1 Fuel Economy) and 'FE BAG 2' (Bag 2 Fuel Economy) must also be submitted. | If Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 3' (Bag 3 Fuel Economy) is submitted then Test Results with Test Result/Emission Names (TI-19) equal to 'FE BAG 1' (Bag 1 Fuel Economy) and 'FE BAG 2' (Bag 2 Fuel Economy) must also be submitted. | (TI-19) | Active | Not Under Development |
| VERIFY-3331 | Certification Test Data | Test Information | LD-CTD-TI-BR052a | If Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 4' (Bag 4 Fuel Economy) is submitted then Test Results with Test Result/Emission Names (TI-19) equal to 'FE BAG 1' (Bag 1 Fuel Economy), 'FE BAG 2' (Bag 2 Fuel Economy) and 'FE BAG 3'(Bag 3 Fuel Economy) must also be submitted. | If Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 4' (Bag 4 Fuel Economy) is submitted then Test Results with Test Result/Emission Names (TI-19) equal to 'FE BAG 1' (Bag 1 Fuel Economy), 'FE BAG 2' (Bag 2 Fuel Economy) and 'FE BAG 3'(Bag 3 Fuel Economy) must also be submitted. | (TI-19) | Active | Not Under Development |
| VERIFY-8066 | Certification Test Data | Test Information | LD-CTD-TI-BR052b | If Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 4' (Bag 4 Fuel Economy) is submitted then Test Results with Test Result/Emission Names (TI-19) equal to 'FE BAG 1' (Bag 1 Fuel Economy), 'FE BAG 2' (Bag 2 Fuel Economy) and 'FE BAG 3'(Bag 3 Fuel Economy) must also be submitted. | If Test Results with Test Result/Emission Name (TI-19) equal to 'FE BAG 4' (Bag 4 Fuel Economy) is submitted then Test Results with Test Result/Emission Names (TI-19) equal to 'FE BAG 1' (Bag 1 Fuel Economy), 'FE BAG 2' (Bag 2 Fuel Economy) and 'FE BAG 3'(Bag 3 Fuel Economy) must also be submitted. | (TI-19) | Active | Not Under Development |
| VERIFY-5637 | Certification Test Data | Test Information | LD-CTD-TI-BR053 | If Original Test Vehicle Model Year (VI-7) is equal to or greater than '2012' and if Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to "Yes", then Analytically-Derived FE/CREE Base Verify Test Number (TI-13.6) is required, otherwise it is not allowed. |
If Original Test Vehicle Model Year (VI-7) is equal to or greater than '2012' and if Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to "Yes", then Analytically-Derived FE/CREE Base Verify Test Number (TI-13.6) is required, otherwise it is not allowed. |
(TI-13.6) | Active | Not Under Development |
| VERIFY-5638 | Certification Test Data | Test Information | LD-CTD-TI-BR054 | The Test Number provided for Analytically-Derived FE/CREE Base Test Number (TI-13.6) must exist in Verify and must belong to the submitter's Manufacturer Code or one of their approved Alternate Manufacturer Codes. | The Test Number provided for Analytically-Derived FE/CREE Base Test Number (TI-13.6) must exist in Verify and must belong to the submitter's Manufacturer Code or one of their approved Alternate Manufacturer Codes. | (TI-13.6) | Active | Not Under Development |
| VERIFY-5639 | Certification Test Data | Test Information | LD-CTD-TI-BR055 | The Test Number provided for Analytically-Derived FE/CREE Base Verify Test Number (TI-13.6) can not be an analytically-derived test (with Analytically-Derived FE/CREE Indicator (TI-13.5) equal to "Yes"). | The Test Number provided for Analytically-Derived FE/CREE Base Verify Test Number (TI-13.6) can not be an analytically-derived test (with Analytically-Derived FE/CREE Indicator (TI-13.5) equal to "Yes"). | (TI-13.6) | Active | Not Under Development |
| VERIFY-5640 | Certification Test Data | Test Information | LD-CTD-TI-BR056 | If Original Test Vehicle Model Year (VI-7) is equal to or greater than '2012' and Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to "Yes", then Analytically-Derived FE / CREE - Total Road Load Horsepower (TI-13.7) is required, otherwise it is not allowed. | If Original Test Vehicle Model Year (VI-7) is equal to or greater than '2012' and Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to "Yes", then Analytically-Derived FE / CREE - Total Road Load Horsepower (TI-13.7) is required, otherwise it is not allowed. | (TI-13.7) | Active | Not Under Development |
| VERIFY-5641 | Certification Test Data | Test Information | LD-CTD-TI-BR057 | If Original Test Vehicle Model Year (VI-7) is equal to or greater than '2012' and Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to "Yes", then Analytically-Derived FE / CREE - ETW (TI-13.8) is required, otherwise it is not allowed. | If Original Test Vehicle Model Year (VI-7) is equal to or greater than '2012' and Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to "Yes", then Analytically-Derived FE / CREE - ETW (TI-13.8) is required, otherwise it is not allowed. | (TI-13.8) | Active | Not Under Development |
| VERIFY-5642 | Certification Test Data | Test Information | LD-CTD-TI-BR058 | If Original Test Vehicle Model Year (VI-7) is equal to or greater than '2012' and Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to "Yes", then Analytically-Derived FE / CREE - N/V Ratio (TI-13.9) is required, otherwise it is not allowed. | If Original Test Vehicle Model Year (VI-7) is equal to or greater than '2012' and Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to "Yes", then Analytically-Derived FE / CREE - N/V Ratio (TI-13.9) is required, otherwise it is not allowed. | (TI-13.9) | Active | Not Under Development |
| VERIFY-5643 | Certification Test Data | Test Information | LD-CTD-TI-BR059 | If Original Test Vehicle Model Year (VI-7) is equal to or greater than '2012', then Manufacturer Confirmatory Test Indicator (TI-18.8) is required for tests being submitted by manufacturers and is not allowed for tests being submitted by LOD. |
If Original Test Vehicle Model Year (VI-7) is equal to or greater than '2012', then Manufacturer Confirmatory Test Indicator (TI-18.8) is required for tests being submitted by manufacturers and is not allowed for tests being submitted by LOD. |
(TI-18.8) | Active | Not Under Development |
| VERIFY-5655 | Certification Test Data | Test Information | LD-CTD-TI-BR060 | If Manufacturer Confirmatory Test Indicator (TI-18.8) is equal to "Yes", then Original Manufacturer Verify Test Number That Was Confirmed (TI-18.9) is required, otherwise it is not allowed. | If Manufacturer Confirmatory Test Indicator (TI-18.8) is equal to "Yes", then Original Manufacturer Verify Test Number That Was Confirmed (TI-18.9) is required, otherwise it is not allowed. | (TI-18.9) | Active | Not Under Development |
| VERIFY-5656 | Certification Test Data | Test Information | LD-CTD-TI-BR061 | Test Date (TI-6) of the test being submitted must be equal to or later than the Test Date (TI-6) of the Original Manufacturer Verify Test Number That Was Confirmed (TI-18.9). | Test Date (TI-6) of the test being submitted must be equal to or later than the Test Date (TI-6) of the Original Manufacturer Verify Test Number That Was Confirmed (TI-18.9). | (TI-6) (TI-18.9) | Active | Not Under Development |
| VERIFY-5657 | Certification Test Data | Test Information | LD-CTD-TI-BR062 | Original Manufacturer Verify Test Number That Was Confirmed (TI-18.9) must exist on a Confirmatory Test Decision Information dataset for the same Vehicle ID (TI-4) and Vehicle Configuration Number (TI-5). |
Original Manufacturer Verify Test Number That Was Confirmed (TI-18.9) must exist on a Confirmatory Test Decision Information dataset for the same Vehicle ID (TI-4) and Vehicle Configuration Number (TI-5). |
(TI-18.9) | Active | Not Under Development |
| VERIFY-5658 | Certification Test Data | Test Information | LD-CTD-TI-BR063 | If Process Code (TI-0.5) is equal to "New Dataset" and if Original Test Vehicle Model Year (VI-7) is equal to or greater than '2012', then Retest Indicator (TI-22) is required for all tests submitted by LOD and Manufacturers. | If Process Code (TI-0.5) is equal to "New Dataset" and if Original Test Vehicle Model Year (VI-7) is equal to or greater than '2012', then Retest Indicator (TI-22) is required for all tests submitted by LOD and Manufacturers. | (TI-22) | Active | Not Under Development |
| VERIFY-5659 | Certification Test Data | Test Information | LD-CTD-TI-BR064a | If Test Category (TI-43) equals 'CD' (Charge Depleting) as determined by the Test Procedure (TI-8), then PHEV Test Information Data Elements from TI-18.1 to TI-18.7 are required, otherwise not allowed. | If Test Category (TI-43) equals 'CD' (Charge Depleting) as determined by the Test Procedure (TI-8), then PHEV Test Information Data Elements from TI-18.1 to TI-18.7 are required, otherwise not allowed. | (TI-18.1) (TI-18.2) (TI-18.3) (TI-18.4) (TI-18.5) (TI-18.6) (TI-18.6.1) (TI-18.7) | Active | Not Under Development |
| VERIFY-6226 | Certification Test Data | Test Information | LD-CTD-TI-BR064b | If Test Category (TI-43) equals 'CD' (Charge Depleting) as determined by the Test Procedure (TI-8), then PHEV Test Information Data Elements from TI-18.1 to TI-18.7 are required, otherwise not allowed. | If Test Category (TI-43) equals 'CD' (Charge Depleting) as determined by the Test Procedure (TI-8), then PHEV Test Information Data Elements from TI-18.1 to TI-18.7 are required, otherwise not allowed. | (TI-18.1) (TI-18.2) (TI-18.3) (TI-18.4) (TI-18.5) (TI-18.6) (TI-18.6.1) (TI-18.7) | Active | Not Under Development |
| VERIFY-5660 | Certification Test Data | Test Information | LD-CTD-TI-BR065 | Recharge Event Voltage (TI-18.3) must be between '100' and '500' volts. | Recharge Event Voltage (TI-18.3) must be between '100' and '500' volts. | (TI-18.3) | Active | Not Under Development |
| VERIFY-5621 | Certification Test Data | Test Information | LD-CTD-TI-BR066 | If Original Manufacturer Verify Test Number That Was Confirmed (TI-18.9) is entered, then its' associated Mfr Code (TI-3), Vehicle ID (TI-4), Vehicle Configuration Number (TI-5), Test Procedure (TI-8) and Test Fuel Type (TI-9) must match the same combination of data elements for the test being entered. | If Original Manufacturer Verify Test Number That Was Confirmed (TI-18.9) is entered, then its' associated Mfr Code (TI-3), Vehicle ID (TI-4), Vehicle Configuration Number (TI-5), Test Procedure (TI-8) and Test Fuel Type (TI-9) must match the same combination of data elements for the test being entered. | (TI-3) (TI-4) (TI-5) (TI-8) (TI-9) | Active | Not Under Development |
| VERIFY-9935 | Certification Test Data | Test Information | LD-CTD-TI-BR068a | If a Test Result/Emission Name (TI-19) value of 'OPT-CREE' (Optional Carbon-Related Exhaust Emissions) is submitted, then Test Result/Emission Name (TI-19) values of 'HC-NM' (Non-methane Hydrocarbon), 'Methane' (Methane) and 'N2O' (Nitrous Oxide) are also required. Otherwise, they are optional. | If a Test Result/Emission Name (TI-19) value of 'OPT-CREE' (Optional Carbon-Related Exhaust Emissions) is submitted, then Test Result/Emission Name (TI-19) values of 'HC-NM' (Non-methane Hydrocarbon), 'Methane' (Methane) and 'N2O' (Nitrous Oxide) are also required. Otherwise, they are optional. | (TI-19) | Active | Not Under Development |
| VERIFY-10386 | Certification Test Data | Test Information | LD-CTD-TI-BR068b | If a Test Result/Emission Name (TI-19) value of 'OPT-CREE' (Optional Carbon-Related Exhaust Emissions) is submitted, then Test Result/Emission Name (TI-19) values of 'HC-NM' (Non-methane Hydrocarbon), 'Methane' (Methane) and 'N2O' (Nitrous Oxide) are also required. Otherwise, they are optional. | If a Test Result/Emission Name (TI-19) value of 'OPT-CREE' (Optional Carbon-Related Exhaust Emissions) is submitted, then Test Result/Emission Name (TI-19) values of 'HC-NM' (Non-methane Hydrocarbon), 'Methane' (Methane) and 'N2O' (Nitrous Oxide) are also required. Otherwise, they are optional. | (TI-19) | Active | Not Under Development |
| VERIFY-9936 | Certification Test Data | Test Information | LD-CTD-TI-BR069a | If Original Test Vehicle Model Year (VI-7) is greater or equal to 2012, and if any of the following are true: Test 5-Cycle Category (TI-45) is equal to 'FTP75' (Federal Test Procedure (75 °F), Test 5-Cycle Category (TI-45) is equal to 'HWY' (Highway NOx), Test Procedure (TI-8) is equal to '81' (Charge Depleting UDDS) or Test Procedure (TI-8) is equal to '84' (Charge Depleting Hwy), then at least one Test Result/Emission Name (TI-19) value of 'CREE' or 'OPT-CREE' is required, otherwise they are optional. Note - For charge depleting tests, 'CREE' or 'OPT-CREE' values for the entire test should be submitted in Bag/Phase #1. | If Original Test Vehicle Model Year (VI-7) is greater or equal to 2012, and if any of the following are true: Test 5-Cycle Category (TI-45) is equal to 'FTP75' (Federal Test Procedure (75 °F), Test 5-Cycle Category (TI-45) is equal to 'HWY' (Highway NOx), Test Procedure (TI-8) is equal to '81' (Charge Depleting UDDS) or Test Procedure (TI-8) is equal to '84' (Charge Depleting Hwy), then at least one Test Result/Emission Name (TI-19) value of 'CREE' or 'OPT-CREE' is required, otherwise they are optional. Note - For charge depleting tests, 'CREE' or 'OPT-CREE' values for the entire test should be submitted in Bag/Phase #1. | (TI-19) | Active | Not Under Development |
| VERIFY-10221 | Certification Test Data | Test Information | LD-CTD-TI-BR069b | If Original Test Vehicle Model Year (VI-7) is greater or equal to 2012, and if any of the following are true: Test 5-Cycle Category (TI-45) is equal to 'FTP75' (Federal Test Procedure (75 °F), Test 5-Cycle Category (TI-45) is equal to 'HWY' (Highway NOx), Test Procedure (TI-8) is equal to '81' (Charge Depleting UDDS) or Test Procedure (TI-8) is equal to '84' (Charge Depleting Hwy), then at least one Test Result/Emission Name (TI-19) value of 'CREE' or 'OPT-CREE' is required, otherwise they are optional. Note - For charge depleting tests, 'CREE' or 'OPT-CREE' values for the entire test should be submitted in Bag/Phase #1. | If Original Test Vehicle Model Year (VI-7) is greater or equal to 2012, and if any of the following are true: Test 5-Cycle Category (TI-45) is equal to 'FTP75' (Federal Test Procedure (75 °F), Test 5-Cycle Category (TI-45) is equal to 'HWY' (Highway NOx), Test Procedure (TI-8) is equal to '81' (Charge Depleting UDDS) or Test Procedure (TI-8) is equal to '84' (Charge Depleting Hwy), then at least one Test Result/Emission Name (TI-19) value of 'CREE' or 'OPT-CREE' is required, otherwise they are optional. Note - For charge depleting tests, 'CREE' or 'OPT-CREE' values for the entire test should be submitted in Bag/Phase #1. | (TI-19) | Active | Not Under Development |
| VERIFY-10222 | Certification Test Data | Test Information | LD-CTD-TI-BR069c | If Original Test Vehicle Model Year (VI-7) is greater or equal to 2012, and if any of the following are true: Test 5-Cycle Category (TI-45) is equal to 'FTP75' (Federal Test Procedure (75 °F), Test 5-Cycle Category (TI-45) is equal to 'HWY' (Highway NOx), Test Procedure (TI-8) is equal to '81' (Charge Depleting UDDS) or Test Procedure (TI-8) is equal to '84' (Charge Depleting Hwy), then at least one Test Result/Emission Name (TI-19) value of 'CREE' or 'OPT-CREE' is required, otherwise they are optional. Note - For charge depleting tests, 'CREE' or 'OPT-CREE' values for the entire test should be submitted in Bag/Phase #1. | If Original Test Vehicle Model Year (VI-7) is greater or equal to 2012, and if any of the following are true: Test 5-Cycle Category (TI-45) is equal to 'FTP75' (Federal Test Procedure (75 °F), Test 5-Cycle Category (TI-45) is equal to 'HWY' (Highway NOx), Test Procedure (TI-8) is equal to '81' (Charge Depleting UDDS) or Test Procedure (TI-8) is equal to '84' (Charge Depleting Hwy), then at least one Test Result/Emission Name (TI-19) value of 'CREE' or 'OPT-CREE' is required, otherwise they are optional. Note - For charge depleting tests, 'CREE' or 'OPT-CREE' values for the entire test should be submitted in Bag/Phase #1. | (TI-19) | Active | Not Under Development |
| VERIFY-10119 | Certification Test Data | Test Information | LD-CTD-TI-BR070 | If Test 5-Cycle Category (TI-45) is 'FTP75' or 'HWY' and if Test Result/Emission Name (TI-19) values of 'HC-NM' (Non-methane Hydrocarbon), 'METHANE' (CH4 - Methane) and 'N2O' (Nitrous Oxide) are submitted, then Unrounded Unadjusted OPT-CREE (TI-19.5) is required. | If Test 5-Cycle Category (TI-45) is 'FTP75' or 'HWY' and if Test Result/Emission Name (TI-19) values of 'HC-NM' (Non-methane Hydrocarbon), 'METHANE' (CH4 - Methane) and 'N2O' (Nitrous Oxide) are submitted, then Unrounded Unadjusted OPT-CREE (TI-19.5) is required. | (TI-19.5) | Active | Not Under Development |
| VERIFY-11595 | Certification Test Data | Test Information | LD-CTD-TI-BR072 | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'Y' (Yes), then the Manufacturer Code (TI-3), Vehicle ID (TI-4) and the Vehicle Configuration Number (TI-5) must be identical to that of the Analytically-Derived FE/CREE Base Verify Test Number (TI-13.6). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'Y' (Yes), then the Manufacturer Code (TI-3), Vehicle ID (TI-4) and the Vehicle Configuration Number (TI-5) must be identical to that of the Analytically-Derived FE/CREE Base Verify Test Number (TI-13.6). | (TI-3) (TI-4) (TI-5) (TI-13.6) | Active | Not Under Development |
| VERIFY-11596 | Certification Test Data | Test Information | LD-CTD-TI-BR073 | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'Y' (Yes), then the Fuel Batch Manufacturer Code (TI-16), the Fuel Batch ID (TI-17), and the Fuel Calibration Number (TI-18) must be identical to that of Analytically-Derived FE/CREE Base Verify Test Number (TI-13.6). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'Y' (Yes), then the Fuel Batch Manufacturer Code (TI-16), the Fuel Batch ID (TI-17), and the Fuel Calibration Number (TI-18) must be identical to that of Analytically-Derived FE/CREE Base Verify Test Number (TI-13.6). | (TI-13.6) (TI-16) (TI-17) (TI-18) | Active | Not Under Development |
| VERIFY-11668 | Certification Test Data | Test Information | LD-CTD-TI-BR074 | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'Y' (Yes), then Test Fuel Type (TI-9) must be identical to the Test Fuel Type of the Analytically-Derived FE/CREE Base Verify Test Number (TI-13.6). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'Y' (Yes), then Test Fuel Type (TI-9) must be identical to the Test Fuel Type of the Analytically-Derived FE/CREE Base Verify Test Number (TI-13.6). | (TI-9) (TI-13.6) | Active | Not Under Development |
| VERIFY-11669 | Certification Test Data | Test Information | LD-CTD-TI-BR075 | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'Y' (Yes), then Test Procedure (TI-8) must be identical to the Test Procedure of the Analytically-Derived FE/CREE Base Verify Test Number (TI-13.6). | If Analytically-Derived FE/CREE Indicator (TI-13.5) is equal to 'Y' (Yes), then Test Procedure (TI-8) must be identical to the Test Procedure of the Analytically-Derived FE/CREE Base Verify Test Number (TI-13.6). | (TI-8) (TI-13.6) | Active | Not Under Development |
| VERIFY-11741 | Certification Test Data | Test Information | LD-CTD-TI-BR076a | If a Test Result with Test Result/Emission Name (TI-19) equal to 'FE BAG 1' (Bag 1 Fuel Economy) is submitted and Analytically-Derived FE/CREE Indicator (TI-13.5) equals 'N' (No), then a Test Result with Test Result/Emission Name (TI-19) equal to 'CO2 BAG 1' (Bag 1 Carbon Dioxide) must also be submitted. | If a Test Result with Test Result/Emission Name (TI-19) equal to 'FE BAG 1' (Bag 1 Fuel Economy) is submitted and Analytically-Derived FE/CREE Indicator (TI-13.5) equals 'N' (No), then a Test Result with Test Result/Emission Name (TI-19) equal to 'CO2 BAG 1' (Bag 1 Carbon Dioxide) must also be submitted. | (TI-19) | Active | Not Under Development |
| VERIFY-11921 | Certification Test Data | Test Information | LD-CTD-TI-BR076b | If a Test Result with Test Result/Emission Name (TI-19) equal to 'FE BAG 1' (Bag 1 Fuel Economy) is submitted and Analytically-Derived FE/CREE Indicator (TI-13.5) equals 'N' (No), then a Test Result with Test Result/Emission Name (TI-19) equal to 'CO2 BAG 1' (Bag 1 Carbon Dioxide) must also be submitted. | If a Test Result with Test Result/Emission Name (TI-19) equal to 'FE BAG 1' (Bag 1 Fuel Economy) is submitted and Analytically-Derived FE/CREE Indicator (TI-13.5) equals 'N' (No), then a Test Result with Test Result/Emission Name (TI-19) equal to 'CO2 BAG 1' (Bag 1 Carbon Dioxide) must also be submitted. | (TI-19) | Active | Not Under Development |
| VERIFY-11742 | Certification Test Data | Test Information | LD-CTD-TI-BR077a | If a Test Result with Test Result/Emission Name (TI-19) equal to 'FE BAG 2' (Bag 2 Fuel Economy) is submitted and Analytically-Derived FE/CREE Indicator (TI-13.5) equals 'N' (No), then a Test Result with Test Result/Emission Name (TI-19) equal to 'CO2 BAG 2' (Bag 2 Carbon Dioxide) must also be submitted. | If a Test Result with Test Result/Emission Name (TI-19) equal to 'FE BAG 2' (Bag 2 Fuel Economy) is submitted and Analytically-Derived FE/CREE Indicator (TI-13.5) equals 'N' (No), then a Test Result with Test Result/Emission Name (TI-19) equal to 'CO2 BAG 2' (Bag 2 Carbon Dioxide) must also be submitted. | (TI-19) | Active | Not Under Development |
| VERIFY-11922 | Certification Test Data | Test Information | LD-CTD-TI-BR077b | If a Test Result with Test Result/Emission Name (TI-19) equal to 'FE BAG 2' (Bag 2 Fuel Economy) is submitted and Analytically-Derived FE/CREE Indicator (TI-13.5) equals 'N' (No), then a Test Result with Test Result/Emission Name (TI-19) equal to 'CO2 BAG 2' (Bag 2 Carbon Dioxide) must also be submitted. | If a Test Result with Test Result/Emission Name (TI-19) equal to 'FE BAG 2' (Bag 2 Fuel Economy) is submitted and Analytically-Derived FE/CREE Indicator (TI-13.5) equals 'N' (No), then a Test Result with Test Result/Emission Name (TI-19) equal to 'CO2 BAG 2' (Bag 2 Carbon Dioxide) must also be submitted. | (TI-19) | Active | Not Under Development |
| VERIFY-11743 | Certification Test Data | Test Information | LD-CTD-TI-BR078a | If a Test Result with Test Result/Emission Name (TI-19) equal to 'FE BAG 3' (Bag 3 Fuel Economy) is submitted and Analytically-Derived FE/CREE Indicator (TI-13.5) equals 'N' (No), then a Test Result with Test Result/Emission Name (TI-19) equal to 'CO2 BAG 3' (Bag 3 Carbon Dioxide) must also be submitted. | If a Test Result with Test Result/Emission Name (TI-19) equal to 'FE BAG 3' (Bag 3 Fuel Economy) is submitted and Analytically-Derived FE/CREE Indicator (TI-13.5) equals 'N' (No), then a Test Result with Test Result/Emission Name (TI-19) equal to 'CO2 BAG 3' (Bag 3 Carbon Dioxide) must also be submitted. | (TI-19) | Active | Not Under Development |
| VERIFY-11923 | Certification Test Data | Test Information | LD-CTD-TI-BR078b | If a Test Result with Test Result/Emission Name (TI-19) equal to 'FE BAG 3' (Bag 3 Fuel Economy) is submitted and Analytically-Derived FE/CREE Indicator (TI-13.5) equals 'N' (No), then a Test Result with Test Result/Emission Name (TI-19) equal to 'CO2 BAG 3' (Bag 3 Carbon Dioxide) must also be submitted. | If a Test Result with Test Result/Emission Name (TI-19) equal to 'FE BAG 3' (Bag 3 Fuel Economy) is submitted and Analytically-Derived FE/CREE Indicator (TI-13.5) equals 'N' (No), then a Test Result with Test Result/Emission Name (TI-19) equal to 'CO2 BAG 3' (Bag 3 Carbon Dioxide) must also be submitted. | (TI-19) | Active | Not Under Development |
| VERIFY-11744 | Certification Test Data | Test Information | LD-CTD-TI-BR079a | If a Test Result with Test Result/Emission Name (TI-19) equal to 'FE BAG 4' (Bag 4 Fuel Economy) is submitted and Analytically-Derived FE/CREE Indicator (TI-13.5) equals 'N' (No), then a Test Result with Test Result/Emission Name (TI-19) equal to 'CO2 BAG 4' (Bag 4 Carbon Dioxide) must also be submitted. | If a Test Result with Test Result/Emission Name (TI-19) equal to 'FE BAG 4' (Bag 4 Fuel Economy) is submitted and Analytically-Derived FE/CREE Indicator (TI-13.5) equals 'N' (No), then a Test Result with Test Result/Emission Name (TI-19) equal to 'CO2 BAG 4' (Bag 4 Carbon Dioxide) must also be submitted. | (TI-19) | Active | Not Under Development |
| VERIFY-11924 | Certification Test Data | Test Information | LD-CTD-TI-BR079b | If a Test Result with Test Result/Emission Name (TI-19) equal to 'FE BAG 4' (Bag 4 Fuel Economy) is submitted and Analytically-Derived FE/CREE Indicator (TI-13.5) equals 'N' (No), then a Test Result with Test Result/Emission Name (TI-19) equal to 'CO2 BAG 4' (Bag 4 Carbon Dioxide) must also be submitted. | If a Test Result with Test Result/Emission Name (TI-19) equal to 'FE BAG 4' (Bag 4 Fuel Economy) is submitted and Analytically-Derived FE/CREE Indicator (TI-13.5) equals 'N' (No), then a Test Result with Test Result/Emission Name (TI-19) equal to 'CO2 BAG 4' (Bag 4 Carbon Dioxide) must also be submitted. | (TI-19) | Active | Not Under Development |
| VERIFY-11983 | Certification Test Data | Test Information | LD-CTD-TI-BR080 | If the Process Code (TI-0.5) is equal to 'C' (Correction) and the Test Number (TI-1) indicates an EPA Confirmatory Test, then the only valid submitter is the EPA. | If the Process Code (TI-0.5) is equal to 'C' (Correction) and the Test Number (TI-1) indicates an EPA Confirmatory Test, then the only valid submitter is the EPA. | (TI-0.5) (TI-1) | Active | Not Under Development |
| VERIFY-12720 | Certification Test Data | Test Information | LD-CTD-TI-BR081 | If Original Test Vehicle Model Year (VI-7) is 2011 or earlier and if Analytically-Derived FE Indicator (TI-13.5) is equal to 'Y' (Yes) and the Test Category (TI-43) is equal to 'FTP', 'HWY', 'US06' or 'SC03' (Test Procedures (TI-8) = 2, 3, 11, 16, 21, 25, 31, 35, 41, 45, 90, 95, 96), then one of the Test Results submitted must have a Test Result/Emission Name (TI-19) equal to 'MFR FE' (Manufacturer Fuel Economy). | If Original Test Vehicle Model Year (VI-7) is 2011 or earlier and if Analytically-Derived FE Indicator (TI-13.5) is equal to 'Y' (Yes) and the Test Category (TI-43) is equal to 'FTP', 'HWY', 'US06' or 'SC03' (Test Procedures (TI-8) = 2, 3, 11, 16, 21, 25, 31, 35, 41, 45, 90, 95, 96), then one of the Test Results submitted must have a Test Result/Emission Name (TI-19) equal to 'MFR FE' (Manufacturer Fuel Economy). | (TI-19) | Active | Not Under Development |
| VERIFY-12742 | Certification Test Data | Test Information | LD-CTD-TI-BR082 | If Analytically-Derived FE Indicator (TI-13.5) is equal to 'Y' (Yes), then the Test Category (TI-43) must be equal to 'FTP', 'HWY', 'US06' or 'SC03' (Test Procedures (TI-8) = 2, 3, 11, 16, 21, 25, 31, 35, 41, 45, 90, 95, 96). | If Analytically-Derived FE Indicator (TI-13.5) is equal to 'Y' (Yes), then the Test Category (TI-43) must be equal to 'FTP', 'HWY', 'US06' or 'SC03' (Test Procedures (TI-8) = 2, 3, 11, 16, 21, 25, 31, 35, 41, 45, 90, 95, 96). | (TI-43) | Active | Not Under Development |
| VERIFY-16810 | Certification Test Data | Test Information | LD-CTD-TI-BR083a | If Original Test Vehicle Model Year (VI-7) is greater than '2014' and Test Category (TI-43) equals 'FTP' (Federal Test Procedure), 'US06' (US06), 'SC03' (SC03), 'HWY' (Highway NOx), or 'CD' (Charge Depleting), then Test Result/Emission Names (TI-19) of 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), 'DT-EER' (Drive Trace Energy Economy Rating) are required; otherwise, they are optional. | If Original Test Vehicle Model Year (VI-7) is greater than '2014' and Test Category (TI-43) equals 'FTP' (Federal Test Procedure), 'US06' (US06), 'SC03' (SC03), 'HWY' (Highway NOx), or 'CD' (Charge Depleting), then Test Result/Emission Names (TI-19) of 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), 'DT-EER' (Drive Trace Energy Economy Rating) are required; otherwise, they are optional. | (TI-19) | Active | Not Under Development |
| VERIFY-16851 | Certification Test Data | Test Information | LD-CTD-TI-BR083b | If Original Test Vehicle Model Year (VI-7) is greater than '2014' and Test Category (TI-43) equals 'FTP' (Federal Test Procedure), 'US06' (US06), 'SC03' (SC03), 'HWY' (Highway NOx), or 'CD' (Charge Depleting), then Test Result/Emission Names (TI-19) of 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), 'DT-EER' (Drive Trace Energy Economy Rating) are required; otherwise, they are optional. | If Original Test Vehicle Model Year (VI-7) is greater than '2014' and Test Category (TI-43) equals 'FTP' (Federal Test Procedure), 'US06' (US06), 'SC03' (SC03), 'HWY' (Highway NOx), or 'CD' (Charge Depleting), then Test Result/Emission Names (TI-19) of 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), 'DT-EER' (Drive Trace Energy Economy Rating) are required; otherwise, they are optional. | (TI-19) | Active | Not Under Development |
| VERIFY-16812 | Certification Test Data | Test Information | LD-CTD-TI-BR084a | If Test Result/Emission Name (TI-19) equals 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), or 'DT-EER' (Drive Trace Energy Economy Rating), then Unrounded Test Result (TI-20) must be greater than or equal to -99.99 and less than or equal to 99.99; otherwise, Unrounded Test Result (TI-20) must be greater than or equal to 0. | If Test Result/Emission Name (TI-19) equals 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), or 'DT-EER' (Drive Trace Energy Economy Rating), then Unrounded Test Result (TI-20) must be greater than or equal to -99.99 and less than or equal to 99.99; otherwise, Unrounded Test Result (TI-20) must be greater than or equal to 0. | (TI-20) | Active | Not Under Development |
| VERIFY-16852 | Certification Test Data | Test Information | LD-CTD-TI-BR084b | If Test Result/Emission Name (TI-19) equals 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), or 'DT-EER' (Drive Trace Energy Economy Rating), then Unrounded Test Result (TI-20) must be greater than or equal to -99.99 and less than or equal to 99.99; otherwise, Unrounded Test Result (TI-20) must be greater than or equal to 0. | If Test Result/Emission Name (TI-19) equals 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), or 'DT-EER' (Drive Trace Energy Economy Rating), then Unrounded Test Result (TI-20) must be greater than or equal to -99.99 and less than or equal to 99.99; otherwise, Unrounded Test Result (TI-20) must be greater than or equal to 0. | (TI-20) | Active | Not Under Development |
| VERIFY-16966 | Certification Test Data | Test Information | LD-CTD-TI-BR085 | A Test Fuel Type (TI-9) value of '8' (Number 1 Fuel Oil) is not currently supported in Verify. | A Test Fuel Type (TI-9) value of '8' (Number 1 Fuel Oil) is not currently supported in Verify. | (TI-9) | Active | Not Under Development |
| VERIFY-22730 | Certification Test Data | Test Information | LD-CTD-TI-BR086 | If Process Code (TI-0.5) equals 'N' (New), then Test Fuel Type (TI-9) must not equal '1' (Indolene 30), '6' (EPA Unleaded Gasoline), '7' (Industrial Unleaded 100 Octane), '8' (Number 1 Fuel Oil), '9' (Cert Diesel 300 ppm Sulfur), '10' (Natural Gas), '24' (Cold CO Regular [Cert]), or '25' (Cold CO Premium [Cert]). | If Process Code (TI-0.5) equals 'N' (New), then Test Fuel Type (TI-9) must not equal '1' (Indolene 30), '6' (EPA Unleaded Gasoline), '7' (Industrial Unleaded 100 Octane), '8' (Number 1 Fuel Oil), '9' (Cert Diesel 300 ppm Sulfur), '10' (Natural Gas), '24' (Cold CO Regular [Cert]), or '25' (Cold CO Premium [Cert]). | (TI-9) | Not in the System | Under Development (To Be Added) |
| VERIFY-22731 | Certification Test Data | Test Information | LD-CTD-TI-BR087 | If Test Fuel Type (TI-9) equals '46' (CARB LEV3 E10 Regular Gasoline), '47' (CARB LEV3 E10 Premium Gasoline), '48' (Tier 3 E10 Regular Gasoline), '49' (Tier 3 E10 Premium Gasoline), '58' (Tier 3 E10 Regular Gasoline [10 RVP-FFV ORVR Only]), or '59' (Tier 3 E10 Premium Gasoline [10 RVP-FFV ORVR Only]), and Test Procedure (TI-8) equals '23' (FED Fuel 2 Day Evap [Butane]), '27' (CA Fuel 2 Day Evap [Butane Load]), '32' (FED Fuel Running Loss), '34' (FED Fuel 3 Day Evap [Butane Load]), '37' (CA Fuel Running Loss), '38' (CA Fuel 3 Day Evap [Butane Load]), '43' (FED Fuel 2 Day Evap [Heat to Load]), or '47' (CA Fuel 2 Day Evap [Heat to Load]), then E10 Evaporative Test Measurement Method (TI-24.5) is required. | If Test Fuel Type (TI-9) equals '46' (CARB LEV3 E10 Regular Gasoline), '47' (CARB LEV3 E10 Premium Gasoline), '48' (Tier 3 E10 Regular Gasoline), '49' (Tier 3 E10 Premium Gasoline), '58' (Tier 3 E10 Regular Gasoline [10 RVP-FFV ORVR Only]), or '59' (Tier 3 E10 Premium Gasoline [10 RVP-FFV ORVR Only]), and Test Procedure (TI-8) equals '23' (FED Fuel 2 Day Evap [Butane]), '27' (CA Fuel 2 Day Evap [Butane Load]), '32' (FED Fuel Running Loss), '34' (FED Fuel 3 Day Evap [Butane Load]), '37' (CA Fuel Running Loss), '38' (CA Fuel 3 Day Evap [Butane Load]), '43' (FED Fuel 2 Day Evap [Heat to Load]), or '47' (CA Fuel 2 Day Evap [Heat to Load]), then E10 Evaporative Test Measurement Method (TI-24.5) is required. | (TI-24.5) | Not in the System | Under Development (To Be Added) |
| VERIFY-22732 | Certification Test Data | Test Information | LD-CTD-TI-BR088 | If the Manufacturer Code of the Submission Author Details does not equal 'LOD' or 'EPA', then E10 Evaporative Test Measurement Method (TI-24.5) must not equal 'FID-EPA' (Actual FID w/o Speciation [EPA Only]). | If the Manufacturer Code of the Submission Author Details does not equal 'LOD' or 'EPA', then E10 Evaporative Test Measurement Method (TI-24.5) must not equal 'FID-EPA' (Actual FID w/o Speciation [EPA Only]). | (TI-24.5) | Not in the System | Under Development (To Be Added) |
| VERIFY-22733 | Certification Test Data | Test Information | LD-CTD-TI-BR089 | If the Manufacturer Code of the Submission Author Details equals 'LOD' or 'EPA', and E10 Evaporative Test Measurement Method (TI-24.5) does not equal 'FID-EPA' (Actual FID w/o Speciation [EPA Only]), then E10 Evaporative Test Measurement Method (TI-24.5) must match the E10 Evaporative Test Measurement Method (TI-24.5) having the same Test Procedure (TI-8) and Test Fuel Type (TI-9) as a test that was reported by the manufacturer in the active Decision Information submission for the vehicle. | If the Manufacturer Code of the Submission Author Details equals 'LOD' or 'EPA', and E10 Evaporative Test Measurement Method (TI-24.5) does not equal 'FID-EPA' (Actual FID w/o Speciation [EPA Only]), then E10 Evaporative Test Measurement Method (TI-24.5) must match the E10 Evaporative Test Measurement Method (TI-24.5) having the same Test Procedure (TI-8) and Test Fuel Type (TI-9) as a test that was reported by the manufacturer in the active Decision Information submission for the vehicle. | (TI-24.5) | Not in the System | Under Development (To Be Added) |
| VERIFY-22734 | Certification Test Data | Test Information | LD-CTD-TI-BR090 | If Test Procedure (TI-8) equals '65' (Evap Canister Bleed Test), '66' (Leak Test - Evap Fuel System OBD), '67' (Leak Test - Port Near Canister) or '68' (Leak Test - Port Near Fuel Pipe), then a Test Result/Emission Name (TI-19) equal to 'LEAK-DIA' (Effective Leak Diameter) must be included. | If Test Procedure (TI-8) equals '65' (Evap Canister Bleed Test), '66' (Leak Test - Evap Fuel System OBD), '67' (Leak Test - Port Near Canister) or '68' (Leak Test - Port Near Fuel Pipe), then a Test Result/Emission Name (TI-19) equal to 'LEAK-DIA' (Effective Leak Diameter) must be included. | (TI-19) | Not in the System | Under Development (To Be Added) |
| VERIFY-22735 | Certification Test Data | Test Information | LD-CTD-TI-BR091 | If Test Procedure (TI-8) equals '69' (Leak Test - Evap Gas Cap), then a Test Result/Emission Name (TI-19) equal to 'LEAK-GAS CAP' (Gas Cap Leakage) must be included. | If Test Procedure (TI-8) equals '69' (Leak Test - Evap Gas Cap), then a Test Result/Emission Name (TI-19) equal to 'LEAK-GAS CAP' (Gas Cap Leakage) must be included. | (TI-19) | Not in the System | Under Development (To Be Added) |
| VERIFY-22737 | Certification Test Data | Test Information | LD-CTD-TI-BR093 | If Test Procedure (TI-8) does not equal '2' (CVS 75 and Later [w/o Can. Load]), '21' (FED Fuel 2 Day Exh [Butane Load]), '25' (CA Fuel 2 Day Exh [Butane Load]), '31' (FED Fuel 3 Day Exh [Butane Load]), '35' (CA Fuel 3 Day Exh [Butane Load]), '41' (FED Fuel 2 Day Exh [Heat to Load]) or '45' (CA Fuel 2 Day Exh [Heat to Load]), then Test Result/Emission Name (TI-19) must not equal 'METHANE-COMB' (Combined CH4 for HD 2b/3 Vehicles Only) or 'N2O-COMB' (Combined Nitrous Oxide for HD 2b/3 Vehicles Only). | If Test Procedure (TI-8) does not equal '2' (CVS 75 and Later [w/o Can. Load]), '21' (FED Fuel 2 Day Exh [Butane Load]), '25' (CA Fuel 2 Day Exh [Butane Load]), '31' (FED Fuel 3 Day Exh [Butane Load]), '35' (CA Fuel 3 Day Exh [Butane Load]), '41' (FED Fuel 2 Day Exh [Heat to Load]) or '45' (CA Fuel 2 Day Exh [Heat to Load]), then Test Result/Emission Name (TI-19) must not equal 'METHANE-COMB' (Combined CH4 for HD 2b/3 Vehicles Only) or 'N2O-COMB' (Combined Nitrous Oxide for HD 2b/3 Vehicles Only). | (TI-19) | Not in the System | Under Development (To Be Added) |
| VERIFY-3332 | Certification Test Data | Test Information | LD-CTD-TI-IB001 | The selected value for Analytically Derived FE/CREE Equivalent Test Weight (ETW) (TI-13.8) is not a valid value. | The selected value for Analytically Derived FE/CREE Equivalent Test Weight (ETW) (TI-13.8) is not a valid value. | (TI-13.8) | Active | Not Under Development |
| VERIFY-3333 | Certification Test Data | Test Information | LD-CTD-TI-IB002 | The selected value for Fuel Economy Value Unit (TI-20.5) is not a valid value. | The selected value for Fuel Economy Value Unit (TI-20.5) is not a valid value. | (TI-20.5) | Active | Not Under Development |
| VERIFY-3334 | Certification Test Data | Test Information | LD-CTD-TI-IB003 | The selected value for Test Procedure (TI-8) is not a valid value. | The selected value for Test Procedure (TI-8) is not a valid value. | (TI-8) | Active | Not Under Development |
| VERIFY-3335 | Certification Test Data | Test Information | LD-CTD-TI-IB004 | The selected value for Retest Reason (TI-23) is not a valid value. | The selected value for Retest Reason (TI-23) is not a valid value. | (TI-23) | Active | Not Under Development |
| VERIFY-3336 | Certification Test Data | Test Information | LD-CTD-TI-IB008 | The selected value for Test Result/Emission Name (TI-19) is not a valid value. | The selected value for Test Result/Emission Name (TI-19) is not a valid value. | (TI-19) | Active | Not Under Development |
| VERIFY-10577 | Certification Test Data | Vehicle Information | LD-CTD-VI-BE001 | If Drive Source (VI-10.5) is equal to 'Combustion Engine' and 'Electric Motor' then Hybrid Indicator (VI-10.6) equals "Yes", otherwise it equals "No". | If Drive Source (VI-10.5) is equal to 'Combustion Engine' and 'Electric Motor' then Hybrid Indicator (VI-10.6) equals "Yes", otherwise it equals "No". | (VI-10.6) | Active | Not Under Development |
| VERIFY-2956 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR001 | Manufacturer Code (VI-1) must exist in the system. | Manufacturer Code (VI-1) must exist in the system. | (VI-1) | Active | Not Under Development |
| VERIFY-2957 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR002 | If Process Code (VI-0.5) is equal to 'C' (Correction) and Original Test Vehicle Model Year (VI-7) is greater than or equal to 2011, then a record must already exist in the system with the same Vehicle ID (VI-2), Vehicle Configuration Number (VI-3), and Manufacturer Code (VI-1). | If Process Code (VI-0.5) is equal to 'C' (Correction) and Original Test Vehicle Model Year (VI-7) is greater than or equal to 2011, then a record must already exist in the system with the same Vehicle ID (VI-2), Vehicle Configuration Number (VI-3), and Manufacturer Code (VI-1). | (VI-2) (VI-3) (VI-1) | Active | Not Under Development |
| VERIFY-2958 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR003 | The Original Test Vehicle Model Year (VI-7) must match the model year embedded in the Original Test Group Name (VI-5). | The Original Test Vehicle Model Year (VI-7) must match the model year embedded in the Original Test Group Name (VI-5). | (VI-7) (VI-5) | Active | Not Under Development |
| VERIFY-2959 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR004 | The Original Test Vehicle Model Year (VI-7) must match the model year embedded in the Original Evaporative/Refueling Family Name (VI-6). | The Original Test Vehicle Model Year (VI-7) must match the model year embedded in the Original Evaporative/Refueling Family Name (VI-6). | (VI-7) (VI-6) | Active | Not Under Development |
| VERIFY-2960 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR005 | The Manufacturer Code (VI-1) must match the manufacturer code embedded in the Original Test Group Name (VI-5). | The Manufacturer Code (VI-1) must match the manufacturer code embedded in the Original Test Group Name (VI-5). | (VI-1) (VI-5) | Active | Not Under Development |
| VERIFY-2961 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR006 | The Manufacturer Code (VI-1) must match the manufacturer code embedded in the Original Evaporative/Refueling Family Name (VI-6). | The Manufacturer Code (VI-1) must match the manufacturer code embedded in the Original Evaporative/Refueling Family Name (VI-6). | (VI-1) (VI-6) | Active | Not Under Development |
| VERIFY-2962 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR007 | The displacement embedded in the Original Test Group Name (VI-5) must be a valid number. | The displacement embedded in the Original Test Group Name (VI-5) must be a valid number. | (VI-5) | Active | Not Under Development |
| VERIFY-2964 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR009 | The canister working capacity embedded in the Original Evaporative/Refueling Family Name (VI-6) must be a valid number. | The canister working capacity embedded in the Original Evaporative/Refueling Family Name (VI-6) must be a valid number. | (VI-6) | Active | Not Under Development |
| VERIFY-2968 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR013 | If Air Aspiration Method (VI-23) is equal to 'OT' (Other) then Air Aspiration Method If Other (VI-24) is required, otherwise it is optional. | If Air Aspiration Method (VI-23) is equal to 'OT' (Other) then Air Aspiration Method If Other (VI-24) is required, otherwise it is optional. | (VI-24) | Active | Not Under Development |
| VERIFY-2969 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR014 | If Air Aspiration Method (VI-23) is equal to 'TC' (Turbocharged), 'SC' (Supercharged), 'TS' (Turbocharged and Supercharged) or 'OT' (Other), then Number of Air Aspiration Devices (VI-25) is required, otherwise it must be equal to 0, if present. | If Air Aspiration Method (VI-23) is equal to 'TC' (Turbocharged), 'SC' (Supercharged), 'TS' (Turbocharged and Supercharged) or 'OT' (Other), then Number of Air Aspiration Devices (VI-25) is required, otherwise it must be equal to 0, if present. | (VI-25) | Active | Not Under Development |
| VERIFY-2970 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR015 | If Air Aspiration Method (VI-23) is not equal to 'NA' (Naturally Aspirated), then Number of Air Aspiration Devices (VI-25) is required and cannot be equal to 0. | If Air Aspiration Method (VI-23) is not equal to 'NA' (Naturally Aspirated), then Number of Air Aspiration Devices (VI-25) is required and cannot be equal to 0. | (VI-25) | Active | Not Under Development |
| VERIFY-2971 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR016 | If Air Aspiration Method (VI-23) is equal to 'TC' (Turbocharged), 'SC' (Supercharged), 'TS' (Turbocharged and Supercharged) or 'OT' (Other), then Air Aspiration Device Configuration (VI-26) is required, otherwise it is not allowed. | If Air Aspiration Method (VI-23) is equal to 'TC' (Turbocharged), 'SC' (Supercharged), 'TS' (Turbocharged and Supercharged) or 'OT' (Other), then Air Aspiration Device Configuration (VI-26) is required, otherwise it is not allowed. | (VI-26) | Active | Not Under Development |
| VERIFY-2972 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR017 | If Air Aspiration Device Configuration (VI-26) is equal to 'N' (Single), then Number of Air Aspiration Devices (VI-25) must be 1. | If Air Aspiration Device Configuration (VI-26) is equal to 'N' (Single), then Number of Air Aspiration Devices (VI-25) must be 1. | (VI-25) | Active | Not Under Development |
| VERIFY-2973 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR018 | If Air Aspiration Device Configuration (VI-26) is not equal to 'N' (Single), then Number of Aspiration Devices (VI-25) must be greater than 1, if present. | If Air Aspiration Device Configuration (VI-26) is not equal to 'N' (Single), then Number of Aspiration Devices (VI-25) must be greater than 1, if present. | (VI-25) | Active | Not Under Development |
| VERIFY-2974 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR019 | Equivalent Test Weight (VI-30) must be greater than Curb Weight (VI-29). | Equivalent Test Weight (VI-30) must be greater than Curb Weight (VI-29). | (VI-30) (VI-29) | Active | Not Under Development |
| VERIFY-2975 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR020 | Gross Vehicle Weight Rating (VI-33) must be greater than Curb Weight (VI-29). | Gross Vehicle Weight Rating (VI-33) must be greater than Curb Weight (VI-29). | (VI-33) (VI-29) | Active | Not Under Development |
| VERIFY-2976 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR021 | If Transmission Type (VI-36) is equal to 'OT' (Other), then Transmission Type Other Description (VI-37) is required. | If Transmission Type (VI-36) is equal to 'OT' (Other), then Transmission Type Other Description (VI-37) is required. | (VI-36) (VI-37) | Active | Not Under Development |
| VERIFY-2977 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR022 | If Transmission Type (VI-36) is equal to 'M' (Manual), then Transmission Lockup (VI-38) must be equal to 'N' (No). | If Transmission Type (VI-36) is equal to 'M' (Manual), then Transmission Lockup (VI-38) must be equal to 'N' (No). | (VI-38) | Active | Not Under Development |
| VERIFY-2978 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR023 | If Creeper Gear (VI-39) is equal to 'Y' (Yes), then Transmission Type (VI-36) must be equal to 'M' (Manual). | If Creeper Gear (VI-39) is equal to 'Y' (Yes), then Transmission Type (VI-36) must be equal to 'M' (Manual). | (VI-36) | Active | Not Under Development |
| VERIFY-2979 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR024 | If Transmission Type (VI-36) is equal to 'CVT' (Continuously Variable), then Number of Transmission Gears (VI-40) must be equal to 1. | If Transmission Type (VI-36) is equal to 'CVT' (Continuously Variable), then Number of Transmission Gears (VI-40) must be equal to 1. | (VI-40) | Active | Not Under Development |
| VERIFY-2980 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR025 | If Air Aspiration Method (VI-23) is not equal to 'NA' (Naturally Aspirated) then Charge Air Cooler Type (VI-27) is required. | If Air Aspiration Method (VI-23) is not equal to 'NA' (Naturally Aspirated) then Charge Air Cooler Type (VI-27) is required. | (VI-27) | Active | Not Under Development |
| VERIFY-2981 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR026 | If the Process Code (VI-0.5) is equal to 'R' (Report) the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (VI-1) of the dataset for which the report requested. | If the Process Code (VI-0.5) is equal to 'R' (Report) the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (VI-1) of the dataset for which the report requested. | (VI-1) | Active | Not Under Development |
| VERIFY-2982 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR027 | If the Process Code (VI-0.5) is equal to 'N' (New) or 'C' (Correction) then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (VI-1) of the submitted dataset. | If the Process Code (VI-0.5) is equal to 'N' (New) or 'C' (Correction) then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (VI-1) of the submitted dataset. | (VI-1) | Active | Not Under Development |
| VERIFY-2983 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR028 | If the Process Code (VI-0.5) is equal to 'N' (New) then the Vehicle Configuration Number (VI-3) is not allowed. | If the Process Code (VI-0.5) is equal to 'N' (New) then the Vehicle Configuration Number (VI-3) is not allowed. | (VI-3) | Active | Not Under Development |
| VERIFY-2984 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR029 | If the Process Code (VI-0.5) is equal to 'C' (Correction) then the Vehicle Configuration Number (VI-3) is required. | If the Process Code (VI-0.5) is equal to 'C' (Correction) then the Vehicle Configuration Number (VI-3) is required. | (VI-3) | Active | Not Under Development |
| VERIFY-2985 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR030 | If the Process Code (VI-0.5) is equal to 'C' (Correction) then this vehicle cannot have any active test for which there are locked and active Certification Summary Information Reports (CSIs). | If the Process Code (VI-0.5) is equal to 'C' (Correction) then this vehicle cannot have any active test for which there are locked and active Certification Summary Information Reports (CSIs). | (VI-0.5) | Active | Not Under Development |
| VERIFY-2986 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR031 | If Process Code (VI-0.5) is equal to 'R' (Report) then a record must already exist in the system with the same Vehicle ID (VI-2), Vehicle Configuration Number (VI-3), and Manufacturer Code (VI-1). |
If Process Code (VI-0.5) is equal to 'R' (Report) then a record must already exist in the system with the same Vehicle ID (VI-2), Vehicle Configuration Number (VI-3), and Manufacturer Code (VI-1). |
(VI-2) (VI-3) (VI-1) (VI-0.5) | Active | Not Under Development |
| VERIFY-3302 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR032 | If Drive Source (VI-10.5) is equal to 'C' (Combustion Engine), then Fuel(s) (VI-11.1) can not equal 'EL' (Electricity). | If Drive Source (VI-10.5) is equal to 'C' (Combustion Engine), then Fuel(s) (VI-11.1) can not equal 'EL' (Electricity). | (VI-11.1) | Active | Not Under Development |
| VERIFY-3303 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR033 | If Drive Source (VI-10.5) is equal to 'E' (Electric Motor), then Fuel(s) (VI-11.1) must equal 'EL' (Electricity), 'H' (Hydrogen), or 'M' (Methanol). |
If Drive Source (VI-10.5) is equal to 'E' (Electric Motor), then Fuel(s) (VI-11.1) must equal 'EL' (Electricity), 'H' (Hydrogen), or 'M' (Methanol). |
(VI-11.1) | Active | Not Under Development |
| VERIFY-3305 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR035a | If more than one fuel is selected for Fuel(s) (VI-11.1) and if Drive Source (VI-10.5) equals 'C' (Combustion Engine), then Multiple Fuel Storage (VI-11.2) is required; otherwise, it is not allowed. | If more than one fuel is selected for Fuel(s) (VI-11.1) and if Drive Source (VI-10.5) equals 'C' (Combustion Engine), then Multiple Fuel Storage (VI-11.2) is required; otherwise, it is not allowed. | (VI-11.2) | Active | Not Under Development |
| VERIFY-5844 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR035b | If more than one fuel is selected for Fuel(s) (VI-11.1) and if Drive Source (VI-10.5) equals 'C' (Combustion Engine), then Multiple Fuel Storage (VI-11.2) is required; otherwise, it is not allowed. | If more than one fuel is selected for Fuel(s) (VI-11.1) and if Drive Source (VI-10.5) equals 'C' (Combustion Engine), then Multiple Fuel Storage (VI-11.2) is required; otherwise, it is not allowed. | (VI-11.2) | Active | Not Under Development |
| VERIFY-3306 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR036 | If Drive Source (VI-10.5) equals 'C' (Combustion Engine) and more than one Fuel(s) (VI-11.1) selected is combustible (i.e., 'G' (Gasoline), 'D'(Diesel), 'M' (Methanol), 'E' (Ethanol), 'CNG' (Compressed Natural Gas), 'LNG' (Liquefied Natural Gas), or 'LPG' (Liquefied Petroleum Gas)), then Multiple Fuel Combustion - Separate Or Together (VI-11.3) is required, otherwise it is optional. | If Drive Source (VI-10.5) equals 'C' (Combustion Engine) and more than one Fuel(s) (VI-11.1) selected is combustible (i.e., 'G' (Gasoline), 'D'(Diesel), 'M' (Methanol), 'E' (Ethanol), 'CNG' (Compressed Natural Gas), 'LNG' (Liquefied Natural Gas), or 'LPG' (Liquefied Petroleum Gas)), then Multiple Fuel Combustion - Separate Or Together (VI-11.3) is required, otherwise it is optional. | (VI-11.3) | Active | Not Under Development |
| VERIFY-3307 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR037 | If Drive Source (VI-10.5) is equal to 'E' (Electric Motor), then Fuel Cell Indicator (VI-11.4) is required, otherwise it is optional. | If Drive Source (VI-10.5) is equal to 'E' (Electric Motor), then Fuel Cell Indicator (VI-11.4) is required, otherwise it is optional. | (VI-11.4) | Active | Not Under Development |
| VERIFY-3308 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR038 | If Drive Source (VI-10.5) is equal to 'E' (Electric Motor), then Rechargeable Energy Storage System Indicator (VI-11.5) is required, otherwise it is optional. | If Drive Source (VI-10.5) is equal to 'E' (Electric Motor), then Rechargeable Energy Storage System Indicator (VI-11.5) is required, otherwise it is optional. | (VI-11.5) | Active | Not Under Development |
| VERIFY-3309 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR039 | If Drive Source (VI-10.5) equals 'E' (Electric Motor) or if Hybrid Indicator (VI-10.6) equals 'Y' (Yes) or if Fuel Cell Indicator (VI-11.4) equals 'Y' (Yes), then Rechargeable Energy Storage System (VI-11.6) is required, otherwise it is optional. | If Drive Source (VI-10.5) equals 'E' (Electric Motor) or if Hybrid Indicator (VI-10.6) equals 'Y' (Yes) or if Fuel Cell Indicator (VI-11.4) equals 'Y' (Yes), then Rechargeable Energy Storage System (VI-11.6) is required, otherwise it is optional. | (VI-11.6) | Active | Not Under Development |
| VERIFY-3310 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR040 | If Rechargeable Energy Storage System (VI-11.6) equals 'OT' (Other), then the Rechargeable Energy Storage System, if 'Other' (VI-11.7) is required, otherwise it is optional. |
If Rechargeable Energy Storage System (VI-11.6) equals 'OT' (Other), then the Rechargeable Energy Storage System, if 'Other' (VI-11.7) is required, otherwise it is optional. |
(VI-11.7) | Active | Not Under Development |
| VERIFY-3311 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR041 | If Drive Source (VI-10.5) is equal to 'E' (Electric Motor), then Off-board Charge Capable Indicator (VI-11.8) is required, otherwise it is optional. | If Drive Source (VI-10.5) is equal to 'E' (Electric Motor), then Off-board Charge Capable Indicator (VI-11.8) is required, otherwise it is optional. | (VI-11.8) | Active | Not Under Development |
| VERIFY-3312 | Certification Test Data | Vehicle Information | LD-CTD-VI-BR042 | If Test Procedure Dynamometer Coefficients Category (VI-40.5) equals 'C-H-E' (City/Highway/Evap) then EPA-Calculated Total Road Load Horsepower (VI-43.5) is required; otherwise, it is not allowed. | If Test Procedure Dynamometer Coefficients Category (VI-40.5) equals 'C-H-E' (City/Highway/Evap) then EPA-Calculated Total Road Load Horsepower (VI-43.5) is required; otherwise, it is not allowed. | (VI-43.5) | Active | Not Under Development |
| VERIFY-3313 | Certification Test Data | Vehicle Information | LD-CTD-VI-IBR001 | The selected value for Fuel(s) (VI-11.1) is not a valid value. | The selected value for Fuel(s) (VI-11.1) is not a valid value. | (VI-11.1) | Active | Not Under Development |
| VERIFY-3316 | Certification Test Data | Vehicle Information | LD-CTD-VI-IBR004 | The selected value for Rechargeable Energy Storage System (VI-11.6) is not a valid value. | The selected value for Rechargeable Energy Storage System (VI-11.6) is not a valid value. | (VI-11.6) | Active | Not Under Development |
| VERIFY-3606 | Certification Test Data | Vehicle Information | LD-CTD-VI-IBR005 | The selected value for Equivalent Test Weight Value (VI-30) is not a valid value. | The selected value for Equivalent Test Weight Value (VI-30) is not a valid value. | (VI-30) | Active | Not Under Development |
| VERIFY-3610 | Certification Test Data | Vehicle Information | LD-CTD-VI-IBR006 | The selected value for Drive Source Identifier (VI-10.5) is not a valid value. | The selected value for Drive Source Identifier (VI-10.5) is not a valid value. | (VI-10.5) | Active | Not Under Development |
| VERIFY-3611 | Certification Test Data | Vehicle Information | LD-CTD-VI-IBR007 | The selected value for Light Duty Transmission Type Identifier (VI-36) is not a valid value. | The selected value for Light Duty Transmission Type Identifier (VI-36) is not a valid value. | (VI-36) | Active | Not Under Development |
| VERIFY-5648 | Certification Test Data | Vehicle Information | LD-CTD-VI-IBR008 | Each Fuel(s) (VI-11.1) may only be selected once per Drive Source (VI-10.5). | Each Fuel(s) (VI-11.1) may only be selected once per Drive Source (VI-10.5). | (VI-11.1) | Active | Not Under Development |
| VERIFY-3059 | Confirmatory Test | Decision Information | LD-CFT-DI-BR001 | Manufacturer Code (DI-1) must exist in the system. | Manufacturer Code (DI-1) must exist in the system. | (DI-1) | Active | Not Under Development |
| VERIFY-3060 | Confirmatory Test | Decision Information | LD-CFT-DI-BR002 | The Model Year (DI-5) must match the model year embedded in the Test Group (DI-7). | The Model Year (DI-5) must match the model year embedded in the Test Group (DI-7). | (DI-5) (DI-7) | Active | Not Under Development |
| VERIFY-3061 | Confirmatory Test | Decision Information | LD-CFT-DI-BR003 | The Model Year (DI-5) must match the model year embedded in the Evaporative/Refueling Family (DI-8). | The Model Year (DI-5) must match the model year embedded in the Evaporative/Refueling Family (DI-8). | (DI-5) (DI-8) | Active | Not Under Development |
| VERIFY-3062 | Confirmatory Test | Decision Information | LD-CFT-DI-BR004 | The Manufacturer Code (DI-1) must match the manufacturer code embedded in the Test Group (DI-7). | The Manufacturer Code (DI-1) must match the manufacturer code embedded in the Test Group (DI-7). | (DI-1) (DI-7) | Active | Not Under Development |
| VERIFY-3063 | Confirmatory Test | Decision Information | LD-CFT-DI-BR005 | The Manufacturer Code (DI-1) must match the manufacturer code embedded in the Evaporative/Refueling Family (DI-8). | The Manufacturer Code (DI-1) must match the manufacturer code embedded in the Evaporative/Refueling Family (DI-8). | (DI-1) (DI-8) | Active | Not Under Development |
| VERIFY-3064 | Confirmatory Test | Decision Information | LD-CFT-DI-BR006 | The displacement embedded in the Test Group (DI-7) must be a valid number. | The displacement embedded in the Test Group (DI-7) must be a valid number. | (DI-7) | Active | Not Under Development |
| VERIFY-3065 | Confirmatory Test | Decision Information | LD-CFT-DI-BR008 | The canister working capacity embedded in the Evaporative/Refueling Family (DI-8) must be a valid number. | The canister working capacity embedded in the Evaporative/Refueling Family (DI-8) must be a valid number. | (DI-8) | Active | Not Under Development |
| VERIFY-3066 | Confirmatory Test | Decision Information | LD-CFT-DI-BR010a | If Process Code (DI-0.5) is equal to 'C' (Correction) then a record must already exist in the system with the same Vehicle ID (DI-3), Vehicle Configuration (DI-4), Manufacturer Code (DI-1) and Model Year (DI-5) and that is not in a state of 'Waived', 'Completed' or 'Deleted'. | If Process Code (DI-0.5) is equal to 'C' (Correction) then a record must already exist in the system with the same Vehicle ID (DI-3), Vehicle Configuration (DI-4), Manufacturer Code (DI-1) and Model Year (DI-5) and that is not in a state of 'Waived', 'Completed' or 'Deleted'. | (DI-3) (DI-4) (DI-1) (DI-5) | Active | Not Under Development |
| VERIFY-10854 | Confirmatory Test | Decision Information | LD-CFT-DI-BR010b | If Process Code (DI-0.5) is equal to 'R' (Report) then a record must already exist in the system with the same Vehicle ID (DI-3), Vehicle Configuration (DI-4), Manufacturer Code (DI-1) and Model Year (DI-5). | If Process Code (DI-0.5) is equal to 'R' (Report) then a record must already exist in the system with the same Vehicle ID (DI-3), Vehicle Configuration (DI-4), Manufacturer Code (DI-1) and Model Year (DI-5). | (DI-3) (DI-4) (DI-1) (DI-5) | Active | Not Under Development |
| VERIFY-3068 | Confirmatory Test | Decision Information | LD-CFT-DI-BR011 | If Process Code (DI-0.5) is equal to 'N' (New) then a record must already exist in the system with the same Vehicle ID (DI-3), Vehicle Configuration (DI-4), and Manufacturer Code (DI-1). | If Process Code (DI-0.5) is equal to 'N' (New) then a record must already exist in the system with the same Vehicle ID (DI-3), Vehicle Configuration (DI-4), and Manufacturer Code (DI-1). | (DI-3) (DI-4) (DI-1) | Active | Not Under Development |
| VERIFY-3069 | Confirmatory Test | Decision Information | LD-CFT-DI-BR012 | At least one Federal Exhaust Emission Standard Level (DI-9) or California Exhaust Standard Emission Standard Level (DI-10) must be selected. | At least one Federal Exhaust Emission Standard Level (DI-9) or California Exhaust Standard Emission Standard Level (DI-10) must be selected. | (DI-9) (DI-10) | Active | Not Under Development |
| VERIFY-3070 | Confirmatory Test | Decision Information | LD-CFT-DI-BR013 | If New Engine or Technology Indicator (DI-14) is equal to 'Y' (Yes) or 'YT' (Yes, but previously tested) then New Engine or Technology Description (DI-15) is required. | If New Engine or Technology Indicator (DI-14) is equal to 'Y' (Yes) or 'YT' (Yes, but previously tested) then New Engine or Technology Description (DI-15) is required. | (DI-15) | Active | Not Under Development |
| VERIFY-3071 | Confirmatory Test | Decision Information | LD-CFT-DI-BR014 | If Running Change (DI-25.2) is equal to 'Y' (Yes) then Running Change Number (DI 25.3) and Running Change Date (DI-25.4) are required. | If Running Change (DI-25.2) is equal to 'Y' (Yes) then Running Change Number (DI 25.3) and Running Change Date (DI-25.4) are required. | (DI-25.3) (DI-25.4) | Active | Not Under Development |
| VERIFY-3072 | Confirmatory Test | Decision Information | LD-CFT-DI-BR015 | Test Number (DI-17.5) must exist in the system. | Test Number (DI-17.5) must exist in the system. | (DI-17.5) | Active | Not Under Development |
| VERIFY-3073 | Confirmatory Test | Decision Information | LD-CFT-DI-BR016 | If the Process Code (DI-0.5) is equal to 'R' (Report), then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (DI-1) of the dataset for which the report was requested. | If the Process Code (DI-0.5) is equal to 'R' (Report), then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (DI-1) of the dataset for which the report was requested. | (DI-1) | Active | Not Under Development |
| VERIFY-3074 | Confirmatory Test | Decision Information | LD-CFT-DI-BR017 | If the Process Code (DI-0.5) is equal to 'N' (New) or 'C' (Correction) then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (DI-1) of the submitted dataset. | If the Process Code (DI-0.5) is equal to 'N' (New) or 'C' (Correction) then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (DI-1) of the submitted dataset. | (DI-1) | Active | Not Under Development |
| VERIFY-3075 | Confirmatory Test | Decision Information | LD-CFT-DI-BR018 | If the value of 'OT' (Other) is chosen for any of the 4 standards fields (DI-9 (Federal Exhaust Emission Standard Level), DI-10 (California Exhaust Emission Standard Level), DI-11 (Federal Evaporative Emission Standard Level), or DI-12 (California Evaporative Emission Standard Level)) then the Manufacturers Comments field (DI-28) is required. | If the value of 'OT' (Other) is chosen for any of the 4 standards fields (DI-9 (Federal Exhaust Emission Standard Level), DI-10 (California Exhaust Emission Standard Level), DI-11 (Federal Evaporative Emission Standard Level), or DI-12 (California Evaporative Emission Standard Level)) then the Manufacturers Comments field (DI-28) is required. | (DI-28) | Active | Not Under Development |
| VERIFY-3076 | Confirmatory Test | Decision Information | LD-CFT-DI-BR019 | If Process Code (DI-0.5) is equal to 'N' (New), then a record cannot already exist in the system with the same Vehicle ID (DI-3), Vehicle Configuration (DI-4), Manufacturer Code (DI-1) and Model Year (DI-5), unless it is in the "Waived", "Completed" or "Deleted" states. | If Process Code (DI-0.5) is equal to 'N' (New), then a record cannot already exist in the system with the same Vehicle ID (DI-3), Vehicle Configuration (DI-4), Manufacturer Code (DI-1) and Model Year (DI-5), unless it is in the "Waived", "Completed" or "Deleted" states. | (DI-3) (DI-4) (DI-1) (DI-5) | Active | Not Under Development |
| VERIFY-3337 | Confirmatory Test | Decision Information | LD-CFT-DI-BR020 | If Model Year (DI-5) is equal to or greater than "2012", then the provided Test Number (DI-17.5) can not have a Test Procedure (TI-8) equal to '62' (Electric Vehicle Urban Range Test) or '63' (Electric Vehicle Highway Range Test). | If Model Year (DI-5) is equal to or greater than "2012", then the provided Test Number (DI-17.5) can not have a Test Procedure (TI-8) equal to '62' (Electric Vehicle Urban Range Test) or '63' (Electric Vehicle Highway Range Test). | (DI-17.5) (TI-8) | Active | Not Under Development |
| VERIFY-5619 | Confirmatory Test | Decision Information | LD-CFT-DI-BR021 | If Test Number (DI-17.5) is valid, then the Manufacturer Code (TI-3), Vehicle ID (TI-4), and Vehicle Configuration Number (TI-5) combination for the test must be the same as the Decision Information combination (Manufacturer Code (DI-1), Vehicle ID (DI-3) and Vehicle Configuration Number (DI-4)) for which it was entered. | If Test Number (DI-17.5) is valid, then the Manufacturer Code (TI-3), Vehicle ID (TI-4), and Vehicle Configuration Number (TI-5) combination for the test must be the same as the Decision Information combination (Manufacturer Code (DI-1), Vehicle ID (DI-3) and Vehicle Configuration Number (DI-4)) for which it was entered. | (DI-17.5) | Active | Not Under Development |
| VERIFY-22683 | Confirmatory Test | Decision Information | LD-CFT-DI-BR022 | If Process Code (DI-0.5) equals 'N' (New), then the test represented by the Test Number (DI-17.5) cannot have a Test Fuel Type (TI-9) equal to '1' (Indolene 30), '6' (EPA Unleaded Gasoline), '7' (Industrial Unleaded 100 Octane), '8' (Number 1 Fuel Oil), '9' (Cert Diesel 300 ppm Sulfur), '10' (Natural Gas), '24' (Cold CO Regular [Cert]), or '25' (Cold CO Premium [Cert]). | If Process Code (DI-0.5) equals 'N' (New), then the test represented by the Test Number (DI-17.5) cannot have a Test Fuel Type (TI-9) equal to '1' (Indolene 30), '6' (EPA Unleaded Gasoline), '7' (Industrial Unleaded 100 Octane), '8' (Number 1 Fuel Oil), '9' (Cert Diesel 300 ppm Sulfur), '10' (Natural Gas), '24' (Cold CO Regular [Cert]), or '25' (Cold CO Premium [Cert]). | (DI-38.5) | Not in the System | Under Development (To Be Added) |
| VERIFY-22689 | Confirmatory Test | Decision Information | LD-CFT-DI-BR023 | If Model Year (DI-5) is greater than or equal to 2020, then Federal Exhaust Emission Standard Level (DI-9) cannot equal 'T3B110' (Federal Tier 3 Transitional Bin 110), 'T3B85' (Federal Tier 3 Transitional Bin 85), or 'T3SULEV30' (Federal Tier 3 Transitional LEV-II SULEV30 Carryover). | If Model Year (DI-5) is greater than or equal to 2020, then Federal Exhaust Emission Standard Level (DI-9) cannot equal 'T3B110' (Federal Tier 3 Transitional Bin 110), 'T3B85' (Federal Tier 3 Transitional Bin 85), or 'T3SULEV30' (Federal Tier 3 Transitional LEV-II SULEV30 Carryover). | (DI-9) | Not in the System | Under Development (To Be Added) |
| VERIFY-22690 | Confirmatory Test | Decision Information | LD-CFT-DI-BR024 | If Model Year (DI-5) is greater than or equal to 2022, then Federal Exhaust Emission Standard Level (DI-9) cannot equal 'HDV2B395' (Federal Tier 3 HD Class 2b Transitional Bin 395), 'HDV2B340' (Federal Tier 3 HD Class 2b Transitional Bin 340), 'HDV3B630' (Federal Tier 3 HD Class 3 Transitional Bin 630), or 'HDV3B570' (Federal Tier 3 HD Class 3 Transitional Bin 570). | If Model Year (DI-5) is greater than or equal to 2022, then Federal Exhaust Emission Standard Level (DI-9) cannot equal 'HDV2B395' (Federal Tier 3 HD Class 2b Transitional Bin 395), 'HDV2B340' (Federal Tier 3 HD Class 2b Transitional Bin 340), 'HDV3B630' (Federal Tier 3 HD Class 3 Transitional Bin 630), or 'HDV3B570' (Federal Tier 3 HD Class 3 Transitional Bin 570). | (DI-9) | Not in the System | Under Development (To Be Added) |
| VERIFY-22691 | Confirmatory Test | Decision Information | LD-CFT-DI-BR025 | If Model Year (DI-5) is greater than or equal to 2022, then Federal Evaporative Emission Standard Level (DI-11) cannot equal 'T3-3Z' [Federal Tier 3 LEV-III Zero Evap (Option 1) Carryover]. | If Model Year (DI-5) is greater than or equal to 2022, then Federal Evaporative Emission Standard Level (DI-11) cannot equal 'T3-3Z' [Federal Tier 3 LEV-III Zero Evap (Option 1) Carryover]. | (DI-9) | Not in the System | Under Development (To Be Added) |
| VERIFY-3077 | Confirmatory Test | Shift Schedule | LD-CFT-SS-BR001a | If Process Code (SS-0.5) is equal to 'R' (Report) or 'C' (Correction), then a record must already exist in the system with the same Shift Schedule ID (SS-1), Shift Schedule Database Code (SS-2), and Manufacturer Code (SS-4). | If Process Code (SS-0.5) is equal to 'R' (Report) or 'C' (Correction), then a record must already exist in the system with the same Shift Schedule ID (SS-1), Shift Schedule Database Code (SS-2), and Manufacturer Code (SS-4). | (SS-1) (SS-2) (SS-4) (SS-0.5) | Active | Not Under Development |
| VERIFY-3078 | Confirmatory Test | Shift Schedule | LD-CFT-SS-BR001b | If Process Code (SS-0.5) is equal to 'R' (Report) or 'C' (Correction), then a record must already exist in the system with the same Shift Schedule ID (SS-1), Shift Schedule Database Code (SS-2), and Manufacturer Code (SS-4). | If Process Code (SS-0.5) is equal to 'R' (Report) or 'C' (Correction), then a record must already exist in the system with the same Shift Schedule ID (SS-1), Shift Schedule Database Code (SS-2), and Manufacturer Code (SS-4). | (SS-1) (SS-2) (SS-4) (SS-0.5) | Active | Not Under Development |
| VERIFY-3079 | Confirmatory Test | Shift Schedule | LD-CFT-SS-BR002 | Manufacturer Code (SS-4) must exist in the system. | Manufacturer Code (SS-4) must exist in the system. | (SS-4) | Active | Not Under Development |
| VERIFY-3080 | Confirmatory Test | Shift Schedule | LD-CFT-SS-BR003 | If Shift Action Code (SS-62) is equal to '99' (Alternative Shift Action), then Shift Point Screen (SS-63) is required. | If Shift Action Code (SS-62) is equal to '99' (Alternative Shift Action), then Shift Point Screen (SS-63) is required. | (SS-63) | Active | Not Under Development |
| VERIFY-3081 | Confirmatory Test | Shift Schedule | LD-CFT-SS-BR004 | If the Process Code (SS-0.5) is equal to 'R' (Report), then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (SS-4) of the dataset for which the report was requested. | If the Process Code (SS-0.5) is equal to 'R' (Report), then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (SS-4) of the dataset for which the report was requested. | (SS-4) | Active | Not Under Development |
| VERIFY-3082 | Confirmatory Test | Shift Schedule | LD-CFT-SS-BR005 | If the Process Code (SS-0.5) is equal to 'N' (New) or 'C' (Correction) then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (SS-4) of the submitted dataset. | If the Process Code (SS-0.5) is equal to 'N' (New) or 'C' (Correction) then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (SS-4) of the submitted dataset. | (SS-4) | Active | Not Under Development |
| VERIFY-3083 | Confirmatory Test | Shift Schedule | LD-CFT-SS-BR006 | If Process Code (SS-0.5) is equal to 'N' (New), then a Shift Schedule record cannot already exist in the system with the same Shift Schedule ID (SS-1), Shift Schedule Database Code (SS-2), and Manufacturer Code (SS-4). | If Process Code (SS-0.5) is equal to 'N' (New), then a Shift Schedule record cannot already exist in the system with the same Shift Schedule ID (SS-1), Shift Schedule Database Code (SS-2), and Manufacturer Code (SS-4). | (SS-1) (SS-2) (SS-4) | Active | Not Under Development |
| VERIFY-3084 | Confirmatory Test | Shift Schedule | LD-CFT-SS-BR007 | The Shift Time (SS-60) entered for a Shift Point (SS-59) must be greater than the Shift Time (SS-60) of the previous Shift Point (SS-59). | The Shift Time (SS-60) entered for a Shift Point (SS-59) must be greater than the Shift Time (SS-60) of the previous Shift Point (SS-59). | (SS-60) (SS-59) | Active | Not Under Development |
| VERIFY-3085 | Confirmatory Test | Shift Schedule | LD-CFT-SS-BR008 | The Shift Point (SS-59) must be specified for all the entries or none of them. | The Shift Point (SS-59) must be specified for all the entries or none of them. | (SS-59) | Active | Not Under Development |
| VERIFY-3086 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR001a | If Process Code (SI-0.5) is equal to 'C' (Correction) then a record must already exist in the system with the same Vehicle ID (SI-2), Vehicle Configuration (SI-3), and Manufacturer Code (SI-1) and Model Year (SI-3.5) and for a Decision Information that is not in a state of 'Waived', 'Completed' or 'Deleted'. | If Process Code (SI-0.5) is equal to 'C' (Correction) then a record must already exist in the system with the same Vehicle ID (SI-2), Vehicle Configuration (SI-3), and Manufacturer Code (SI-1) and Model Year (SI-3.5) and for a Decision Information that is not in a state of 'Waived', 'Completed' or 'Deleted'. | (SI-2) (SI-3) (SI-1) (SI-3.5) | Active | Not Under Development |
| VERIFY-3087 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR001b | If Process Code (SI-0.5) is equal to 'R' (Report) then a record must already exist in the system with the same Vehicle ID (SI-2), Vehicle Configuration (SI-3), and Manufacturer Code (SI-1) and Model Year (SI-3.5). | If Process Code (SI-0.5) is equal to 'R' (Report) then a record must already exist in the system with the same Vehicle ID (SI-2), Vehicle Configuration (SI-3), and Manufacturer Code (SI-1) and Model Year (SI-3.5). | (SI-2) (SI-3) (SI-1) (SI-3.5) | Active | Not Under Development |
| VERIFY-3088 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR002 | If Driver Selectable Transmission (SI-19) is equal to 'Y' (Yes), then Transmission Mode Tested Description (SI-20) is required. | If Driver Selectable Transmission (SI-19) is equal to 'Y' (Yes), then Transmission Mode Tested Description (SI-20) is required. | (SI-20) | Active | Not Under Development |
| VERIFY-3089 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR003 | If Canister Loading (SI-38) is equal to 'Y' (Yes), then Number of Canisters (SI-39) is required and Canister Working Capacity (SI-40) and Total Canister Volume (SI-41) are required for each canister. | If Canister Loading (SI-38) is equal to 'Y' (Yes), then Number of Canisters (SI-39) is required and Canister Working Capacity (SI-40) and Total Canister Volume (SI-41) are required for each canister. | (SI-39) (SI-40) (SI-41) | Active | Not Under Development |
| VERIFY-3090 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR004a | The Test Procedure Codes Selected for EPA Confirmatory Testing (SI-41.5) must include all codes that have been selected for EPA testing in the Decision Information submission for that Manufacturer Code (SI-1), Vehicle ID (SI-2), Vehicle Configuration (SI-3), and Model Year (SI-3.5). | The Test Procedure Codes Selected for EPA Confirmatory Testing (SI-41.5) must include all codes that have been selected for EPA testing in the Decision Information submission for that Manufacturer Code (SI-1), Vehicle ID (SI-2), Vehicle Configuration (SI-3), and Model Year (SI-3.5). | (SI-2) (SI-3) (SI-1) (SI-3.5) (SI-41.5) | Active | Not Under Development |
| VERIFY-3091 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR004b | The Test Procedure Codes Selected for EPA Confirmatory Testing (SI-41.5) must include all codes that have been selected for EPA testing in the Decision Information submission for that Manufacturer Code (SI-1), Vehicle ID (SI-2), Vehicle Configuration (SI-3), and Model Year (SI-3.5). | The Test Procedure Codes Selected for EPA Confirmatory Testing (SI-41.5) must include all codes that have been selected for EPA testing in the Decision Information submission for that Manufacturer Code (SI-1), Vehicle ID (SI-2), Vehicle Configuration (SI-3), and Model Year (SI-3.5). | (SI-2) (SI-3) (SI-1) (SI-3.5) (SI-41.5) | Active | Not Under Development |
| VERIFY-3092 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR005 | Either a shift schedule with the Manufacturer Code (SI-1), Shift Schedule ID (SI-46) and Shift Schedule Database Code (SI-47) must exist in the system, or a shift schedule with the LOD Manufacturer Code, Shift Schedule ID (SI-46) and Shift Schedule Database Code (SI-47) must exist in the system. | Either a shift schedule with the Manufacturer Code (SI-1), Shift Schedule ID (SI-46) and Shift Schedule Database Code (SI-47) must exist in the system, or a shift schedule with the LOD Manufacturer Code, Shift Schedule ID (SI-46) and Shift Schedule Database Code (SI-47) must exist in the system. | (SI-1) (SI-46) (SI-47) | Active | Not Under Development |
| VERIFY-3093 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR006 | If Engine Type (SI-10) is equal to 'Other' (99), then Test Vehicle Information Comments (SI-55) (i.e., 'Supplemental Information Comments' on the web screen) are required. | If Engine Type (SI-10) is equal to 'Other' (99), then Test Vehicle Information Comments (SI-55) (i.e., 'Supplemental Information Comments' on the web screen) are required. | (SI-55) | Active | Not Under Development |
| VERIFY-3095 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR008 | If Fuel (SI-56.5) is equal to 'D' (Diesel), then Upward Diesel Adjustment Factor (SI-93) is required. | If Fuel (SI-56.5) is equal to 'D' (Diesel), then Upward Diesel Adjustment Factor (SI-93) is required. | (SI-93) | Active | Not Under Development |
| VERIFY-3096 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR009 | If Fuel (SI-56.5) is equal to 'D' (Diesel), then Downward Diesel Adjustment Factor (SI-94) is required. | If Fuel (SI-56.5) is equal to 'D' (Diesel), then Downward Diesel Adjustment Factor (SI-94) is required. | (SI-94) | Active | Not Under Development |
| VERIFY-3097 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR010 | If the Process Code (SI-0.5) is equal to 'R' (Report), then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (SI-1) of the dataset for which the report was requested. | If the Process Code (SI-0.5) is equal to 'R' (Report), then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (SI-1) of the dataset for which the report was requested. | (SI-1) | Active | Not Under Development |
| VERIFY-3098 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR011 | If the Process Code (SI-0.5) is equal to 'N' (New) or 'C' (Correction) then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (SI-1) of the submitted dataset. | If the Process Code (SI-0.5) is equal to 'N' (New) or 'C' (Correction) then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (SI-1) of the submitted dataset. | (SI-1) | Active | Not Under Development |
| VERIFY-3099 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR012 | If Process Code (SI-0.5) is equal to 'N' (New) then a Decision Information record must already exist in the system with the same Vehicle ID (SI-2), Vehicle Configuration (SI-3), Manufacturer Code (SI-1) and Model Year (SI-3.5) and that is not in a state of 'Waived', 'Completed' or 'Deleted'. | If Process Code (SI-0.5) is equal to 'N' (New) then a Decision Information record must already exist in the system with the same Vehicle ID (SI-2), Vehicle Configuration (SI-3), Manufacturer Code (SI-1) and Model Year (SI-3.5) and that is not in a state of 'Waived', 'Completed' or 'Deleted'. | (SI-2) (SI-3) (SI-1) (SI-3.5) | Active | Not Under Development |
| VERIFY-3100 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR013 | If Process Code (SI-0.5) is equal to 'N' (New), then a Supplemental Information record cannot already exist in the system with the same Vehicle ID (SI-2), Vehicle Configuration (SI-3), Manufacturer Code (SI-1) and Model Year (SI-3.5) and for a Decision Information that is not in a state of 'Waived', 'Completed' or 'Deleted'. | If Process Code (SI-0.5) is equal to 'N' (New), then a Supplemental Information record cannot already exist in the system with the same Vehicle ID (SI-2), Vehicle Configuration (SI-3), Manufacturer Code (SI-1) and Model Year (SI-3.5) and for a Decision Information that is not in a state of 'Waived', 'Completed' or 'Deleted'. | (SI-2) (SI-3) (SI-1) (SI-3.5) | Active | Not Under Development |
| VERIFY-3101 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR014 | Exhaust Certification/In-Use Code (SI-90) must equal 'C' (Certification). | Exhaust Certification/In-Use Code (SI-90) must equal 'C' (Certification). | (SI-90) | Active | Not Under Development |
| VERIFY-3102 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR015 | Evaporative Certification/In-Use Code (SI-97) must equal 'C' (Certification). | Evaporative Certification/In-Use Code (SI-97) must equal 'C' (Certification). | (SI-97) | Active | Not Under Development |
| VERIFY-3103 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR016 | If the Test Procedure Code Selected for EPA Confirmatory Testing (SI-41.5) is equal to '23' (Federal Fuel 2-day Evap), '27' (California Fuel 2-day Evap), '62' (Electric Vehicle Urban Range Test), or '63' (Electric Vehicle Highway Range Test), then the Shift schedule ID (SI-46) is optional. otherwise, it is required. | If the Test Procedure Code Selected for EPA Confirmatory Testing (SI-41.5) is equal to '23' (Federal Fuel 2-day Evap), '27' (California Fuel 2-day Evap), '64' (Evap CARB Fuel Only [Rig] Test), '65' (Evap Canister Bleed Test), '66' (Leak Test - Evap Fuel System OBD), '67' (Leak Test - Port Near Canister), '68' (Leak Test - Port Near Fuel Pipe), or '69' (Leak Test - Evap Gas Cap), then the Shift schedule ID (SI-46) is optional. otherwise, it is required. | (SI-46) | Active | Under Development (To Be Updated) |
| VERIFY-3104 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR017 | If Test Fuel Type Code for EPA Confirmatory Testing (DI-38.5) is not equal to '50' (Hydrogen) or '62' (Electricity), then Nominal Main Fuel Tank Capacity (SI-26) and Fuel Tank Capacity Unit (SI-27) are required. | If Test Fuel Type Code for EPA Confirmatory Testing (DI-38.5) is not equal to '50' (Hydrogen) or '62' (Electricity), then Nominal Main Fuel Tank Capacity (SI-26) and Fuel Tank Capacity Unit (SI-27) are required. | (SI-26) (SI-27) | Active | Not Under Development |
| VERIFY-3105 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR018 | If a Test Procedure Code Selected for EPA Confirmatory Testing (SI-41.5) is equal to '2', '3', '11', '16', '21', '25', '90', '95', or '96' then at least one Exhaust Standard for the test procedure is required. | If a Test Procedure Code Selected for EPA Confirmatory Testing (SI-41.5) is equal to '2', '3', '11', '16', '21', '25', '90', '95', or '96' then at least one Exhaust Standard for the test procedure is required. | (SI-92) (SI-56) (SI-90) (SI-91) (SI-57A) (SI-56.5) (SI-92) (SI-60) (SI-59) (SI-62) (SI-58) (SI-58.5) (SI-58.6) (SI-63) (SI-64) (SI-93) (SI-94) (SI-65) (SI-67) | Active | Not Under Development |
| VERIFY-3106 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR019 | If a Test Procedure Code Selected for EPA Confirmatory Testing (SI-41.5) is equal to '23' or '27', then at least one Evaporative/Refueling Standard for the test procedure is required. | If a Test Procedure Code Selected for EPA Confirmatory Testing (SI-41.5) is equal to '23' or '27', then at least one Evaporative/Refueling Standard for the test procedure is required. | (SI-98) (SI-96) (SI-97) (SI-57B) (SI-80) (SI-72) (SI-71) (SI-75) (SI-73) (SI-76) | Active | Not Under Development |
| VERIFY-3107 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR020 | If the Exhaust Standard Test Procedure (SI-92) is an ORVR (24 or 44) or Running Loss (32 or 37) test, then a Test Result/Emission Name (SI-59) of 'HC-TOTAL' is not allowed. | If the Exhaust Standard Test Procedure (SI-92) is an ORVR (24 or 44) or Running Loss (32 or 37) test, then a Test Result/Emission Name (SI-59) of 'HC-TOTAL' is not allowed. | (SI-59) | Active | Not Under Development |
| VERIFY-3108 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR021 | If the Evaporative Standard Test Procedure (SI-98) is an ORVR (24 or 44) or Running Loss (32 or 37) test, then a Test Result/Emission Name (SI-71) of 'HC-TOTAL' is not allowed. | If the Evaporative Standard Test Procedure (SI-98) is an ORVR (24 or 44) or Running Loss (32 or 37) test, then a Test Result/Emission Name (SI-71) of 'HC-TOTAL' is not allowed. | (SI-71) | Active | Not Under Development |
| VERIFY-3109 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR022 | An Exhaust Standard Test Result/Emission Name (SI-59) of 'HC' is only allowed for ORVR (Test Procedure (SI-92) equal to 24 or 44) or Running Loss (Test Procedure (SI-92) equal to 32 or 37) tests. | An Exhaust Standard Test Result/Emission Name (SI-59) of 'HC' is only allowed for ORVR (Test Procedure (SI-92) equal to 24 or 44) or Running Loss (Test Procedure (SI-92) equal to 32 or 37) tests. | (SI-59) | Active | Not Under Development |
| VERIFY-3110 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR023 | An Evaporative Test Result/Emission Name (SI-71) of 'HC' is only allowed for ORVR (Test Procedure (SI-98) equal to 24 or 44) or Running Loss (Test Procedure (SI-98) equal to 32 or 37) tests. | An Evaporative Test Result/Emission Name (SI-71) of 'HC' is only allowed for ORVR (Test Procedure (SI-98) equal to 24 or 44) or Running Loss (Test Procedure (SI-98) equal to 32 or 37) tests. | (SI-71) | Active | Not Under Development |
| VERIFY-3112 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR025 | The EPA Vehicle Class (SI-91) cannot be equal to 'LDVT' (LDV + LDT1) at the Exhaust Emission Standard Level. | The EPA Vehicle Class (SI-91) cannot be equal to 'LDVT' (LDV + LDT1) at the Exhaust Emission Standard Level. | (SI-91) | Active | Not Under Development |
| VERIFY-3339 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR026 | If Hybrid Indicator (VI-10.6) is equal to 'Y' (Yes), then Nominal Hybrid Battery Voltage (SI-37.5) is required; otherwise, it is not allowed. | If Hybrid Indicator (VI-10.6) is equal to 'Y' (Yes), then Nominal Hybrid Battery Voltage (SI-37.5) is required; otherwise, it is not allowed. | (SI-37.5) | Active | Not Under Development |
| VERIFY-3340 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR027 | If Hybrid Indicator (VI-10.6) is equal to 'Y' (Yes), then Maximum Hybrid Battery Current (SI-37.6) is required; otherwise, it is not allowed. | If Hybrid Indicator (VI-10.6) is equal to 'Y' (Yes), then Maximum Hybrid Battery Current (SI-37.6) is required; otherwise, it is not allowed. | (SI-37.6) | Active | Not Under Development |
| VERIFY-5673 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR028 | The following values for Test Result/Emission Name (SI-59) are not allowed within the Exhaust Standards section: 'CREE' (Carbon-Related Exhaust Emissions), 'OPT-CREE' (Optional Carbon-Related Exhaust Emissions), 'AMP-HRS' (Integrated Amp-hours), 'START-SOC' (System Start State of Charge Watt-hours), 'END-SOC' (System End State of Charge Watt-hours), 'ACT-DISTANCE' (Actual Distance Driven (miles)), 'AS-VOLT' (Average System Voltage), 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), and 'DT-EER' (Drive Trace Energy Economy Rating). | The following values for Test Result/Emission Name (SI-59) are not allowed within the Exhaust Standards section: 'CREE' (Carbon-Related Exhaust Emissions), 'OPT-CREE' (Optional Carbon-Related Exhaust Emissions), 'AMP-HRS' (Integrated Amp-hours), 'START-SOC' (System Start State of Charge Watt-hours), 'END-SOC' (System End State of Charge Watt-hours), 'ACT-DISTANCE' (Actual Distance Driven (miles)), 'AS-VOLT' (Average System Voltage), 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), and 'DT-EER' (Drive Trace Energy Economy Rating). | (SI-59) | Active | Not Under Development |
| VERIFY-5674 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR029 | The following values for Test Result/Emission Name (SI-71) are not allowed within the Evaporative/Refueling Standards section: 'CREE' (Carbon-Related Exhaust Emissions), 'OPT-CREE' (Optional Carbon-Related Exhaust Emissions), 'AMP-HRS' (Integrated Amp-hours), 'START-SOC' (System Start State of Charge Watt-hours), 'END-SOC' (System End State of Charge Watt-hours), 'ACT-DISTANCE' (Actual Distance Driven (miles)), 'AS-VOLT' (Average System Voltage), 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), and 'DT-EER' (Drive Trace Energy Economy Rating). | The following values for Test Result/Emission Name (SI-71) are not allowed within the Evaporative/Refueling Standards section: 'CREE' (Carbon-Related Exhaust Emissions), 'OPT-CREE' (Optional Carbon-Related Exhaust Emissions), 'AMP-HRS' (Integrated Amp-hours), 'START-SOC' (System Start State of Charge Watt-hours), 'END-SOC' (System End State of Charge Watt-hours), 'ACT-DISTANCE' (Actual Distance Driven (miles)), 'AS-VOLT' (Average System Voltage), 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), and 'DT-EER' (Drive Trace Energy Economy Rating). | (SI-71) | Active | Not Under Development |
| VERIFY-13386 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR030 | If the Test Procedure Code Selected for EPA Confirmatory Testing (SI-41.5) equals '11' (Cold CO), then within the related Vehicle Information, Target Coefficient A (VI-41), Target Coefficient B (VI-42), Target Coefficient C (VI-43), Set Coefficient A (VI-44), Set Coefficient B (VI-45), and Set Coefficient C (VI-46) are required for the Test Procedure Dynamometer Coefficients Category (VI-40.5) equal to 'Cold-CO' (Cold CO). | If the Test Procedure Code Selected for EPA Confirmatory Testing (SI-41.5) equals '11' (Cold CO), then within the related Vehicle Information, Target Coefficient A (VI-41), Target Coefficient B (VI-42), Target Coefficient C (VI-43), Set Coefficient A (VI-44), Set Coefficient B (VI-45), and Set Coefficient C (VI-46) are required for the Test Procedure Dynamometer Coefficients Category (VI-40.5) equal to 'Cold-CO' (Cold CO). | (VI-41) (VI-42) (VI-43) (VI-44) (VI-45) (VI-46) (VI-40.5) | Active | Not Under Development |
| VERIFY-13388 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR031 | If the Test Procedure Code Selected for EPA Confirmatory Testing (SI-41.5) equals '90' (US06), then within the related Vehicle Information, Target Coefficient A (VI-41), Target Coefficient B (VI-42), Target Coefficient C (VI-43), Set Coefficient A (VI-44), Set Coefficient B (VI-45), and Set Coefficient C (VI-46) are required for the Test Procedure Dynamometer Coefficients Category (VI-40.5) equal to 'US06' (US06). | If the Test Category (TI-43) for the Test Procedure Code Selected for EPA Confirmatory Testing (SI-41.5) equals 'US06' (Test Procedure equal to '16', '90', '96'), then within the related Vehicle Information, Target Coefficient A (VI-41), Target Coefficient B (VI-42), Target Coefficient C (VI-43), Set Coefficient A (VI-44), Set Coefficient B (VI-45), and Set Coefficient C (VI-46) are required for the Test Procedure Dynamometer Coefficients Category (VI-40.5) equal to 'US06' (US06). | (VI-41) (VI-42) (VI-43) (VI-44) (VI-45) (VI-46) (VI-40.5) | Active | Under Development (To Be Updated) |
| VERIFY-13389 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR032 | If the Test Category (TI-43) for the Test Procedure Code Selected for EPA Confirmatory Testing (SI-41.5) equals 'FTP' (Test Procedure equal to '2', '21', '25', '31', '35', '41', '45', '51', or '52'), 'HWY' (Test Procedure equal to '3') or 'EVAP' (Test Procedure equal to '23', '27', '34', '38', '43', or '47'), then within the related Vehicle Information, Target Coefficient A (VI-41), Target Coefficient B (VI-42), Target Coefficient C (VI-43), Set Coefficient A (VI-44), Set Coefficient B (VI-45), and Set Coefficient C (VI-46) are required for the Test Procedure Dynamometer Coefficients Category (VI-40.5) equal to 'C-H-E' (City/Highway/Evap). | If the Test Category (TI-43) for the Test Procedure Code Selected for EPA Confirmatory Testing (SI-41.5) equals 'FTP' (Test Procedure equal to '2', '21', '25', '31', '35', '41', '45', '51', or '52'), 'HWY' (Test Procedure equal to '3') or 'EVAP' (Test Procedure equal to '23', '27', '34', '38', '43', or '47'), then within the related Vehicle Information, Target Coefficient A (VI-41), Target Coefficient B (VI-42), Target Coefficient C (VI-43), Set Coefficient A (VI-44), Set Coefficient B (VI-45), and Set Coefficient C (VI-46) are required for the Test Procedure Dynamometer Coefficients Category (VI-40.5) equal to 'C-H-E' (City/Highway/Evap). | (VI-41) (VI-42) (VI-43) (VI-44) (VI-45) (VI-46) (VI-40.5) | Active | Not Under Development |
| VERIFY-22789 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR033 | If Primary Engine Cooling Fan Placement Code (SI-42) equals '20' (Road Speed Fan [width 31.5 in. x height 24 in.]), then Road Speed Fan Setup Specifications (SI-44.5) is required, otherwise it is not allowed. | If Primary Engine Cooling Fan Placement Code (SI-42) equals '20' (Road Speed Fan [width 31.5 in. x height 24 in.]), then Road Speed Fan Setup Specifications (SI-44.5) is required, otherwise it is not allowed. | (SI-44.5) | Not in the System | Under Development (To Be Added) |
| VERIFY-22783 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR034 | If Model Year (SI-3.5) is greater than or equal to 2020, then Exhaust Emission Standard Level (SI-57A) must not equal 'T3B110' (Federal Tier 3 Transitional Bin 110), 'T3B85' (Federal Tier 3 Transitional Bin 85), or 'T3SULEV30' (Federal Tier 3 Transitional LEV-II SULEV30 Carryover). | If Model Year (SI-3.5) is greater than or equal to 2020, then Exhaust Emission Standard Level (SI-57A) must not equal 'T3B110' (Federal Tier 3 Transitional Bin 110), 'T3B85' (Federal Tier 3 Transitional Bin 85), or 'T3SULEV30' (Federal Tier 3 Transitional LEV-II SULEV30 Carryover). | (SI-57A) | Not in the System | Under Development (To Be Added) |
| VERIFY-22785 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR035 | If Model Year (SI-3.5) is greater than or equal to 2022, then Exhaust Emission Standard Level (SI-57A) must not equal 'HDV2B395' (Federal Tier 3 HD Class 2b Transitional Bin 395), 'HDV2B340' (Federal Tier 3 HD Class 2b Transitional Bin 340), 'HDV3B630' (Federal Tier 3 HD Class 3 Transitional Bin 630), or 'HDV3B570' (Federal Tier 3 HD Class 3 Transitional Bin 570). | If Model Year (SI-3.5) is greater than or equal to 2022, then Exhaust Emission Standard Level (SI-57A) must not equal 'HDV2B395' (Federal Tier 3 HD Class 2b Transitional Bin 395), 'HDV2B340' (Federal Tier 3 HD Class 2b Transitional Bin 340), 'HDV3B630' (Federal Tier 3 HD Class 3 Transitional Bin 630), or 'HDV3B570' (Federal Tier 3 HD Class 3 Transitional Bin 570). | (SI-57A) | Not in the System | Under Development (To Be Added) |
| VERIFY-22786 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR036 | If Model Year (SI-3.5) is greater than or equal to 2022, then Evaporative/Refueling Standard Level (SI-57B) must not equal 'T3-3Z' (Federal Tier 3 LEV-III Zero Evap [Option 1] Carryover). | If Model Year (SI-3.5) is greater than or equal to 2022, then Evaporative/Refueling Standard Level (SI-57B) must not equal 'T3-3Z' (Federal Tier 3 LEV-III Zero Evap [Option 1] Carryover). | (SI-57B) | Not in the System | Under Development (To Be Added) |
| VERIFY-22858 | Confirmatory Test | Supplemental Information | LD-CFT-SI-BR037 | If the Test Procedure Code Selected for EPA Confirmatory Testing (SI-41.5) equals '9' (HWY80), '60' (AC17 - MANUAL A/C CONTROLS), '61' (AC17 - AUTOMATIC A/C CONTROLS), or '95' (SC03), then within the related Vehicle Information, Target Coefficient A (VI-41), Target Coefficient B (VI-42), Target Coefficient C (VI-43), Set Coefficient A (VI-44), Set Coefficient B (VI-45), and Set Coefficient C (VI-46) are required for the Test Procedure Dynamometer Coefficients Category (VI-40.5) equal to 'C-H-E' (City/Highway/Evap). | If the Test Procedure Code Selected for EPA Confirmatory Testing (SI-41.5) equals '9' (HWY80), '60' (AC17 - MANUAL A/C CONTROLS), '61' (AC17 - AUTOMATIC A/C CONTROLS), or '95' (SC03), then within the related Vehicle Information, Target Coefficient A (VI-41), Target Coefficient B (VI-42), Target Coefficient C (VI-43), Set Coefficient A (VI-44), Set Coefficient B (VI-45), and Set Coefficient C (VI-46) are required for the Test Procedure Dynamometer Coefficients Category (VI-40.5) equal to 'C-H-E' (City/Highway/Evap). | (VI-40.5) (VI-41) (VI-42) (VI-43) (VI-44) (VI-45) (VI-46) | Not in the System | Under Development (To Be Added) |
| VERIFY-3647 | Confirmatory Test | Supplemental Information | LD-CFT-SI-IB001a | The selected value for Fuel(s) (SI-56.5) under Exhaust Emissions Standards is not a valid value. | The selected value for Fuel(s) (SI-56.5) under Exhaust Emissions Standards is not a valid value. | (SI-56.5) | Active | Not Under Development |
| VERIFY-3648 | Confirmatory Test | Supplemental Information | LD-CFT-SI-IB001b | The selected value for Fuel(s) (SI-80) under Evaporative Emissions Standard is not a valid value. | The selected value for Fuel(s) (SI-80) under Evaporative Emissions Standard is not a valid value. | (SI-80) | Active | Not Under Development |
| VERIFY-3649 | Confirmatory Test | Supplemental Information | LD-CFT-SI-IB002a | The selected value for Test Procedure (SI-41.5) under Supplemental Test Procedures is not a valid value. | The selected value for Test Procedure (SI-41.5) under Supplemental Test Procedures is not a valid value. | (SI-41.5) | Active | Not Under Development |
| VERIFY-3650 | Confirmatory Test | Supplemental Information | LD-CFT-SI-IB002b | The selected value for Test Procedure (SI-92) under Exhaust Emissions Standard is not a valid value. | The selected value for Test Procedure (SI-92) under Exhaust Emissions Standard is not a valid value. | (SI-92) | Active | Not Under Development |
| VERIFY-3651 | Confirmatory Test | Supplemental Information | LD-CFT-SI-IB002c | The selected value for Test Procedure (SI-98) under Exhaust Emissions Standard is not a valid value. | The selected value for Test Procedure (SI-98) under Exhaust Emissions Standard is not a valid value. | (SI-98) | Active | Not Under Development |
| VERIFY-3652 | Confirmatory Test | Supplemental Information | LD-CFT-SI-IB003a | The selected value for Test Result (SI-59) under Exhaust Emissions Standard is not a valid value. | The selected value for Test Result (SI-59) under Exhaust Emissions Standard is not a valid value. | (SI-59) | Active | Not Under Development |
| VERIFY-3653 | Confirmatory Test | Supplemental Information | LD-CFT-SI-IB003b | The selected value for Test Result (SI-71) under Exhaust Emissions Standard is not a valid value. | The selected value for Test Result (SI-71) under Exhaust Emissions Standard is not a valid value. | (SI-71) | Active | Not Under Development |
| VERIFY-3113 | Certification | Carline | LD-CERT-CL-BR001 | Manufacturer Code (CL-1) must exist in the system. | Manufacturer Code (CL-1) must exist in the system. | (CL-1) | Active | Not Under Development |
| VERIFY-3114 | Certification | Carline | LD-CERT-CL-BR002a | If Process Code (CL-0.5) equals 'C' (Correction) then a record must already exist in the system with the same Model Year (CL-2), Division Code (CL-3), Carline Code (CL-4), and Manufacturer Code (CL-1). | If Process Code (CL-0.5) equals 'C' (Correction) then a record must already exist in the system with the same Model Year (CL-2), Division Code (CL-3), Carline Code (CL-4), and Manufacturer Code (CL-1). | (CL-4) (CL-1) (CL-3) (CL-2) | Active | Not Under Development |
| VERIFY-3115 | Certification | Carline | LD-CERT-CL-BR002b | If Process Code (CL-0.5) equals 'R' (Report) then a record must already exist in the system with the same Model Year (CL-2), Division Code (CL-3), Carline Code (CL-4), and Manufacturer Code (CL-1). | If Process Code (CL-0.5) equals 'R' (Report) then a record must already exist in the system with the same Model Year (CL-2), Division Code (CL-3), Carline Code (CL-4), and Manufacturer Code (CL-1). | (CL-4) (CL-1) (CL-3) (CL-2) | Active | Not Under Development |
| VERIFY-3116 | Certification | Carline | LD-CERT-CL-BR003 | For any submission, the Division Code (CL-3) must already exist in the system. | For any submission, the Division Code (CL-3) must already exist in the system. | (CL-3) | Active | Not Under Development |
| VERIFY-3117 | Certification | Carline | LD-CERT-CL-BR004 | If Process Code (CL-0.5) equals 'N' (New) then the Carline Code (CL-4) must not exist in the system for that Manufacturer Code (CL-1) and Division Code (CL-3) and Model Year (CL-2). | If Process Code (CL-0.5) equals 'N' (New) then the Carline Code (CL-4) must not exist in the system for that Manufacturer Code (CL-1) and Division Code (CL-3) and Model Year (CL-2). | (CL-4) (CL-2) (CL-3) | Active | Not Under Development |
| VERIFY-3118 | Certification | Carline | LD-CERT-CL-BR005 | If the Class Code (CL-5) equals '2' (Mini Compact), '3' (Subcompact), '4' (Compact), '5' (Midsize), '6' (Large), '7' (Small Station Wagon), '8' (Midsize Station Wagon), or '9' (Large Station Wagon) (indicating a passenger vehicle that is not a two-seater) then Average Passenger Volume (CL-9) and Average Luggage Volume (CL-10) are required, otherwise not allowed. | If the Class Code (CL-5) equals '2' (Mini Compact), '3' (Subcompact), '4' (Compact), '5' (Midsize), '6' (Large), '7' (Small Station Wagon), '8' (Midsize Station Wagon), or '9' (Large Station Wagon) (indicating a passenger vehicle that is not a two-seater) then Average Passenger Volume (CL-9) and Average Luggage Volume (CL-10) are required, otherwise not allowed. | (CL-9) (CL-10) | Active | Not Under Development |
| VERIFY-3122 | Certification | Carline | LD-CERT-CL-BR009 | If the Process Code (CL-0.5) is equal to 'R' (Report) the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (CL-1) of the dataset for which the report was requested. | If the Process Code (CL-0.5) is equal to 'R' (Report) the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (CL-1) of the dataset for which the report was requested. | (CL-1) | Active | Not Under Development |
| VERIFY-3123 | Certification | Carline | LD-CERT-CL-BR010 | If the Process Code (CL-0.5) is equal to 'N' or 'C' then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (CL-1) of the submitted dataset. | If the Process Code (CL-0.5) is equal to 'N' or 'C' then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (CL-1) of the submitted dataset. | (CL-1) | Active | Not Under Development |
| VERIFY-3124 | Certification | Carline | LD-CERT-CL-BR011 | If the Process Code (CL-0.5) is 'C' (Correction) then there cannot be any locked and active Certificate Summary Information Reports (CSIs) which reference this Carline Code (CL-4). | If the Process Code (CL-0.5) is 'C' (Correction) then there cannot be any locked and active Certificate Summary Information Reports (CSIs) which reference this Carline Code (CL-4). | (CL-4) | Active | Not Under Development |
| VERIFY-3125 | Certification | Carline | LD-CERT-CL-BR012 | If this is a Batch Data set then for each Carline with Process Code (CL-0.5) equals 'N' (New) the Carline Code (CL-4), Manufacturer Code (CL-1), Division Code (CL-3) and Model Year (CL-2) must be unique. | If this is a Batch Data set then for each Carline with Process Code (CL-0.5) equals 'N' (New) the Carline Code (CL-4), Manufacturer Code (CL-1), Division Code (CL-3) and Model Year (CL-2) must be unique. | (CL-4) (CL-1) (CL-3) (CL-2) | Active | Not Under Development |
| VERIFY-3341 | Certification | Carline | LD-CERT-CL-BR013 | If FE Label Carline Class Code (CL-5) is equal to '2' (Minicompact Cars), then the sum of Average Passenger Volume (CL-9) and Average Luggage Volume (CL-10) (rounded to a tenth) must be less than 85. | If FE Label Carline Class Code (CL-5) is equal to '2' (Minicompact Cars), then the sum of Average Passenger Volume (CL-9) and Average Luggage Volume (CL-10) (rounded to a tenth) must be less than 85. | (CL-9) (CL-10) | Active | Not Under Development |
| VERIFY-3342 | Certification | Carline | LD-CERT-CL-BR014 | If FE Label Carline Class Code (CL-5) is equal to '3' (Subcompact Cars), then the sum of Average Passenger Volume (CL-9) and Average Luggage Volume (CL-10) (rounded to a tenth) must be greater than or equal to 85 and less than 100. | If FE Label Carline Class Code (CL-5) is equal to '3' (Subcompact Cars), then the sum of Average Passenger Volume (CL-9) and Average Luggage Volume (CL-10) (rounded to a tenth) must be greater than or equal to 85 and less than 100. | (CL-9) (CL-10) | Active | Not Under Development |
| VERIFY-3343 | Certification | Carline | LD-CERT-CL-BR015 | If FE Label Carline Class Code (CL-5) is equal to '4' (Compact Cars), then the sum of Average Passenger Volume (CL-9) and Average Luggage Volume (CL-10) (rounded to a tenth) must be greater than or equal to 100 and less than 110. | If FE Label Carline Class Code (CL-5) is equal to '4' (Compact Cars), then the sum of Average Passenger Volume (CL-9) and Average Luggage Volume (CL-10) (rounded to a tenth) must be greater than or equal to 100 and less than 110. | (CL-9) (CL-10) | Active | Not Under Development |
| VERIFY-3344 | Certification | Carline | LD-CERT-CL-BR016 | If FE Label Carline Class Code (CL-5) is equal to '5' (Midsize Cars), then the sum of Average Passenger Volume (CL-9) and Average Luggage Volume (CL-10) (rounded to a tenth) must be greater than or equal to 110 and less than 120. | If FE Label Carline Class Code (CL-5) is equal to '5' (Midsize Cars), then the sum of Average Passenger Volume (CL-9) and Average Luggage Volume (CL-10) (rounded to a tenth) must be greater than or equal to 110 and less than 120. | (CL-9) (CL-10) | Active | Not Under Development |
| VERIFY-3345 | Certification | Carline | LD-CERT-CL-BR017 | If FE Label Carline Class Code (CL-5) is equal to '6' (Large Cars), then the sum of Average Passenger Volume (CL-9) and Average Luggage Volume (CL-10) (rounded to a tenth) must be greater than or equal to 120. | If FE Label Carline Class Code (CL-5) is equal to '6' (Large Cars), then the sum of Average Passenger Volume (CL-9) and Average Luggage Volume (CL-10) (rounded to a tenth) must be greater than or equal to 120. | (CL-9) (CL-10) | Active | Not Under Development |
| VERIFY-3346 | Certification | Carline | LD-CERT-CL-BR018 | If FE Label Carline Class Code (CL-5) is equal to '7' (Small Station Wagons), then the sum of Average Passenger Volume (CL-9) and Average Luggage Volume (CL-10) (rounded to a tenth) must be less than 130. | If FE Label Carline Class Code (CL-5) is equal to '7' (Small Station Wagons), then the sum of Average Passenger Volume (CL-9) and Average Luggage Volume (CL-10) (rounded to a tenth) must be less than 130. | (CL-9) (CL-10) | Active | Not Under Development |
| VERIFY-3347 | Certification | Carline | LD-CERT-CL-BR019 | If FE Label Carline Class Code (CL-5) is equal to '8' (Midsize Station Wagons), then the sum of Average Passenger Volume (CL-9) and Average Luggage Volume (CL-10) (rounded to a tenth) must be greater than or equal to 130 and less than 160. | If FE Label Carline Class Code (CL-5) is equal to '8' (Midsize Station Wagons), then the sum of Average Passenger Volume (CL-9) and Average Luggage Volume (CL-10) (rounded to a tenth) must be greater than or equal to 130 and less than 160. | (CL-9) (CL-10) | Active | Not Under Development |
| VERIFY-3348 | Certification | Carline | LD-CERT-CL-BR020 | If FE Label Carline Class Code is equal to '9' (Large Station Wagons), then the sum of Average Passenger Volume (CL-9) and Average Luggage Volume (CL-10) (rounded to a tenth) must be greater than or equal to 160. | If FE Label Carline Class Code is equal to '9' (Large Station Wagons), then the sum of Average Passenger Volume (CL-9) and Average Luggage Volume (CL-10) (rounded to a tenth) must be greater than or equal to 160. | (CL-9) (CL-10) | Active | Not Under Development |
| VERIFY-6782 | Certification | Carline | LD-CERT-CL-BR021 | If FE LABEL Carline Class Code (CL-5) equals '2', '3','4', '5', '6', '7', '8', or '9', then at least one of the following conditions must be met: 1) both 2-Door Passenger Volume (CL-11) and 2-Door Luggage Volume (CL-12) must not be equal to zero or NULL; or 2) both 4-Door Passenger Volume (CL-13) and 4-Door Luggage Volume (CL-14) must not be equal to zero or NULL; or 3) both Hatchback Passenger Volume (CL-15) and Hatchback Luggage Volume (CL-16) must not be equal to zero or NULL. |
If FE LABEL Carline Class Code (CL-5) equals '2', '3','4', '5', '6', '7', '8', or '9', then at least one of the following conditions must be met: 1) both 2-Door Passenger Volume (CL-11) and 2-Door Luggage Volume (CL-12) must not be equal to zero or NULL; or 2) both 4-Door Passenger Volume (CL-13) and 4-Door Luggage Volume (CL-14) must not be equal to zero or NULL; or 3) both Hatchback Passenger Volume (CL-15) and Hatchback Luggage Volume (CL-16) must not be equal to zero or NULL. |
(CL-11) (CL-12) (CL-13) (CL-14) (CL-15) (CL-16) | Active | Not Under Development |
| VERIFY-10804 | Certification | Carline | LD-CERT-CL-BR022 | If Model Year is less than or equal to '2012', then FE Label Carline Class Code (CL-5) cannot equal '30' (Small SUV 2WD), '31' (Small SUV 4WD), '32' (Standard SUV 2WD), or '33' (Standard SUV 4WD). | If Model Year is less than or equal to '2012', then FE Label Carline Class Code (CL-5) cannot equal '30' (Small SUV 2WD), '31' (Small SUV 4WD), '32' (Standard SUV 2WD), or '33' (Standard SUV 4WD). | (CL-5) | Active | Not Under Development |
| VERIFY-10805 | Certification | Carline | LD-CERT-CL-BR023 | If Model Year is greater than or equal to '2013', then FE Label Carline Class Code (CL-5) cannot equal '22' (SUV 2WD) or '23' (SUV 4WD). | If Model Year is greater than or equal to '2013', then FE Label Carline Class Code (CL-5) cannot equal '22' (SUV 2WD) or '23' (SUV 4WD). | (CL-5) | Active | Not Under Development |
| VERIFY-10900 | Certification | Carline | LD-CERT-CL-BR024 | FE Label Carline Class Code (CL-5) is not allowed to equal '24' (Electric Vehicles). | FE Label Carline Class Code (CL-5) is not allowed to equal '24' (Electric Vehicles). | (CL-5) | Active | Not Under Development |
| VERIFY-11436 | Certification | Carline | LD-CERT-CL-BR025 | Warning: FE Label Carline Class Code (CL-5) equals '17' (Special Purpose Vehicle 2WD) or '18' (Special Purpose Vehicle 4WD) or '19' (Special Purpose Vehicle Cab Chassis). These Carline class codes are only allowed with prior EPA approval. | Warning: FE Label Carline Class Code (CL-5) equals '17' (Special Purpose Vehicle 2WD) or '18' (Special Purpose Vehicle 4WD) or '19' (Special Purpose Vehicle Cab Chassis). These Carline class codes are only allowed with prior EPA approval. | (CL-5) | Active | Not Under Development |
| VERIFY-12228 | Certification | Carline | LD-CERT-CL-BR026 | If FE Label Carline Class Code (CL-5) is '7' (Small), '8' (Midsize), or '9' (Large Station Wagon), then Hatchback Passenger Volume (CL-15) and Hatchback Luggage Volume (CL-16) must be blank. | If FE Label Carline Class Code (CL-5) is '7' (Small), '8' (Midsize), or '9' (Large Station Wagon), then Hatchback Passenger Volume (CL-15) and Hatchback Luggage Volume (CL-16) must be blank. | (CL-15) (CL-16) | Active | Not Under Development |
| VERIFY-3349 | Certification | Carline | LD-CERT-CL-IB001 | The selected value for FE Label Carline Class Code (CL-5) is not a valid value. | The selected value for FE Label Carline Class Code (CL-5) is not a valid value. | (CL-5) | Active | Not Under Development |
| VERIFY-3260 | Certification | Certificate Request | LD-CERT-CR-BR001 | If Process Code (CR-0.5) is not equal to 'I' (Update Commerce Introduction Date), then a Test Group record must exist in the system for the same Test Group (CR-4) and Evaporative/Refueling Family Name (CR-5) and Model Year (CR-3). | If Process Code (CR-0.5) is not equal to 'I' (Update Commerce Introduction Date), then a Test Group record must exist in the system for the same Test Group (CR-4) and Evaporative/Refueling Family Name (CR-5) and Model Year (CR-3). | (CR-4) (CR-5) (CR-3) | Active | Not Under Development |
| VERIFY-3261 | Certification | Certificate Request | LD-CERT-CR-BR002 | If Process Code (CR-0.5) is equal to 'I' (Update Commerce Introduction Date), then a Test Group record must exist in the system for the same Test Group (CR-4) and Model Year (CR-3). | If Process Code (CR-0.5) is equal to 'I' (Update Commerce Introduction Date), then a Test Group record must exist in the system for the same Test Group (CR-4) and Model Year (CR-3). | (CR-4) (CR-3) | Active | Not Under Development |
| VERIFY-3262 | Certification | Certificate Request | LD-CERT-CR-BR011 | If Process Code (CR-0.5) is equal to 'I' (Update Commerce Introduction Date) then Commerce Introduction Date (CR-7) is required. | If Process Code (CR-0.5) is equal to 'I' (Update Commerce Introduction Date) then Commerce Introduction Date (CR-7) is required. | (CR-7) | Active | Not Under Development |
| VERIFY-3263 | Certification | Certificate Request | LD-CERT-CR-BR012 | If Process Code (CR-0.5) is equal to 'N' (New) or 'L' (Lock) then Commerce Introduction Date (CR-7), Meet All Applicable Standards Indicator (CR-9), Meet All Applicable Requirements Indicator (CR-10), OBD System Approval Indicator (CR-11), CARB Executive Order Issued Indicator (CR-12), ORVR System Approval Indicator (CR-14), Compliance Fee Paid Indicator (CR-15), No Defeat Device Indicator (CR-16), CAP2000 Conditional Certificate (CR-17), ICI Certificate Indicator (CR-18), and Alternate Fuel Converter Indicator (CR-19) are required. | If Process Code (CR-0.5) is equal to 'N' (New) or 'L' (Lock) then Commerce Introduction Date (CR-7), Meet All Applicable Standards Indicator (CR-9), Meet All Applicable Requirements Indicator (CR-10), OBD System Approval Indicator (CR-11), CARB Executive Order Issued Indicator (CR-12), ORVR System Approval Indicator (CR-14), Compliance Fee Paid Indicator (CR-15), No Defeat Device Indicator (CR-16), CAP2000 Conditional Certificate (CR-17), ICI Certificate Indicator (CR-18), and Alternate Fuel Converter Indicator (CR-19) are required. | (CR-7) (CR-9) (CR-10) (CR-11) (CR-12) (CR-14) (CR-15) (CR-16) (CR-17) (CR-18) (CR-19) | Active | Not Under Development |
| VERIFY-3264 | Certification | Certificate Request | LD-CERT-CR-BR013 | If Process Code (CR-0.5) is not equal to 'U' (Unlock) or 'L' (Lock), then Lock/Unlock Comment (CR-20) is not allowed. | If Process Code (CR-0.5) is not equal to 'U' (Unlock) or 'L' (Lock), then Lock/Unlock Comment (CR-20) is not allowed. | (CR-20) | Active | Not Under Development |
| VERIFY-3265 | Certification | Certificate Request | LD-CERT-CR-BR014 | If Process Code (CR-0.5) is equal to 'L' (Lock) then New Certificate Needed (CR-21) is required. | If Process Code (CR-0.5) is equal to 'L' (Lock) then New Certificate Needed (CR-21) is required. | (CR-21) | Active | Not Under Development |
| VERIFY-3266 | Certification | Certificate Request | LD-CERT-CR-BR015 | If CARB Executive Order Issued Indicator (CR-12) is equal to 'Y' (Yes) then CARB Executive Order Number (CR-13) is required. | If CARB Executive Order Issued Indicator (CR-12) is equal to 'Y' (Yes) then CARB Executive Order Number (CR-13) is required. | (CR-13) | Active | Not Under Development |
| VERIFY-3267 | Certification | Certificate Request | LD-CERT-CR-BR016 | There cannot be a pending certificate request for this Test Group (CR-4) and Evaporative/Refueling Family (CR-5) in the system. The certificate must either be issued or denied before a new certificate request with Process Code (CR-0.5) equal to 'N' (New) can be submitted. | There cannot be a pending certificate request for this Test Group (CR-4) and Evaporative/Refueling Family (CR-5) in the system. The certificate must either be issued or denied before a new certificate request with Process Code (CR-0.5) equal to 'N' (New) can be submitted. | (CR-4) (CR-5) | Active | Not Under Development |
| VERIFY-3268 | Certification | Certificate Request | LD-CERT-CR-BR017 | This Test Group (CR-4) and Evaporative/Refueling Family (CR-5) combination has been marked as VOID. No new certificate requests with a Process Code (CR-0.5) of 'N' or a Revised Certificate Needed (CR-21) of 'Y' will be accepted. | This Test Group (CR-4) and Evaporative/Refueling Family (CR-5) combination has been marked as VOID. No new certificate requests with a Process Code (CR-0.5) of 'N' or a Revised Certificate Needed (CR-21) of 'Y' will be accepted. | (CR-4) (CR-5) | Active | Not Under Development |
| VERIFY-3269 | Certification | Certificate Request | LD-CERT-CR-BR018 | This rule does not cause the transaction to be rejected. However, this certificate request has been denied since at least one of Meet All Applicable Standards Indicator (CR-9), Meet All Applicable Requirements Indicator (CR-10), OBD System Approval Indicator (CR-11), CARB Executive Order Issued Indicator (CR-12), ORVR System Approval Indicator (CR-14), or No Defeat Device Indicator (CR-16) is equal to 'N' (No). | This rule does not cause the transaction to be rejected. However, this certificate request has been denied since at least one of Meet All Applicable Standards Indicator (CR-9), Meet All Applicable Requirements Indicator (CR-10), OBD System Approval Indicator (CR-11), CARB Executive Order Issued Indicator (CR-12), ORVR System Approval Indicator (CR-14), or No Defeat Device Indicator (CR-16) is equal to 'N' (No). | (CR-9) (CR-10) (CR-11) (CR-12) (CR-14) (CR-15) (CR-16) | Active | Not Under Development |
| VERIFY-3270 | Certification | Certificate Request | LD-CERT-CR-BR019 | When requesting a Certificate Request report Process Code (CR-0.5) equals 'R' (Report)), a Certificate Request record must exist with the same Test Group (CR-4), Evaporative/Refueling Family (CR-5), Model Year (CR-3), and Manufacturer Code (CR-1). | When requesting a Certificate Request report Process Code (CR-0.5) equals 'R' (Report)), a Certificate Request record must exist with the same Test Group (CR-4), Evaporative/Refueling Family (CR-5), Model Year (CR-3), and Manufacturer Code (CR-1). | (CR-1) (CR-4) (CR-3) (CR-5) | Active | Not Under Development |
| VERIFY-3271 | Certification | Certificate Request | LD-CERT-CR-BR020a | Manufacturer Code of the Submission Author Details must match the Manufacturer Code (CR-1) of the submitted dataset. | Manufacturer Code of the Submission Author Details must match the Manufacturer Code (CR-1) of the submitted dataset. | (CR-1) | Active | Not Under Development |
| VERIFY-3272 | Certification | Certificate Request | LD-CERT-CR-BR020b | Manufacturer Code of the Submission Author Details must match the Manufacturer Code (CR-1) of the submitted dataset. | Manufacturer Code of the Submission Author Details must match the Manufacturer Code (CR-1) of the submitted dataset. | (CR-1) | Active | Not Under Development |
| VERIFY-3273 | Certification | Certificate Request | LD-CERT-CR-BR020c | Manufacturer Code of the Submission Author Details must match the Manufacturer Code (CR-1) of the submitted dataset. | Manufacturer Code of the Submission Author Details must match the Manufacturer Code (CR-1) of the submitted dataset. | (CR-1) | Active | Not Under Development |
| VERIFY-3274 | Certification | Certificate Request | LD-CERT-CR-BR021 | The CSI report for this Test Group (CR-4) and Evaporative/Refueling Family (CR-5) combination shows failed tests. | The CSI report for this Test Group (CR-4) and Evaporative/Refueling Family (CR-5) combination shows failed tests. | (CR-4) (CR-5) | Active | Not Under Development |
| VERIFY-3275 | Certification | Certificate Request | LD-CERT-CR-BR022 | An Application for Certification document must have been submitted for this Test Group. | An Application for Certification document must have been submitted for this Test Group. | (CR-4) | Active | Not Under Development |
| VERIFY-3277 | Certification | Certificate Request | LD-CERT-CR-BR024 | If Process Code (CR-0.5) is equal to 'N' (New) or 'L' (Lock), the GHG Exempt Status (TG-216.7) is equal to 'NE' (Not Exempt) and Model Year (CR-3) is greater than or equal to '2012', then GHG Pre-Model Year Report Indicator (CR-22) is required, otherwise it is not allowed. | If Process Code (CR-0.5) is equal to 'N' (New) or 'L' (Lock), the GHG Exempt Status (TG-216.7) is equal to 'NE' (Not Exempt) and Model Year (CR-3) is greater than or equal to '2012', then GHG Pre-Model Year Report Indicator (CR-22) is required, otherwise it is not allowed. | (CR-22) | Active | Not Under Development |
| VERIFY-11992 | Certification | Certificate Request | LD-CERT-CR-BR026 | If HD/GHG Indicator (TG-6.5) is 'Y' (Yes), then an HD-GHG 2b/3 Pre-Model Year Report must have been submitted for this Model Year (CR-3). | If HD/GHG Indicator (TG-6.5) is 'Y' (Yes), then an HD-GHG 2b/3 Pre-Model Year Report must have been submitted for this Model Year (CR-3). | (CR-3) | Active | Not Under Development |
| VERIFY-12186 | Certification | Certificate Request | LD-CERT-CR-BR027 | If GHG Pre-Model Year Report Indicator (CR-22) is 'Y' (Yes), then an LD-GHG Pre-Model Year Report must have been submitted for this Model Year (CR-3). | If GHG Pre-Model Year Report Indicator (CR-22) is 'Y' (Yes), then an LD-GHG Pre-Model Year Report must have been submitted for this Model Year (CR-3). | (CR-3) | Active | Not Under Development |
| VERIFY-12397 | Certification | Certificate Request | LD-CERT-CR-BR028 | If Process Code (CR-0.5) is equal to 'N' (New) or 'I' (Update Commerce Introduction Date), then Model Year (CR-3) is not allowed to be more than one year earlier than the current calendar year. | If Process Code (CR-0.5) is equal to 'N' (New) or 'I' (Update Commerce Introduction Date), then Model Year (CR-3) is not allowed to be more than one year earlier than the current calendar year. | (CR-3) | Active | Not Under Development |
| VERIFY-12473 | Certification | Certificate Request | LD-CERT-CR-BR029 | If Process Code (CR-0.5) is equal to 'L' (Lock Request) and the Model Year (CR-3) is more than one year earlier than the current calendar year, then New Certificate Needed (CR-21) must not equal 'Y' (Yes). | If Process Code (CR-0.5) is equal to 'L' (Lock Request) and the Model Year (CR-3) is more than one year earlier than the current calendar year, then New Certificate Needed (CR-21) must not equal 'Y' (Yes). | (CR-21) | Active | Not Under Development |
| VERIFY-3126 | Certification | Evaporative / Refueling Family | LD-CERT-EV-BR001a | If Process Code (EV-0.5) is equal to 'C' (Correction) then a record must already exist in the system with the same Evaporative/Refueling Family Name (EV-1) and Model Year (EV-1.5). | If Process Code (EV-0.5) is equal to 'C' (Correction) then a record must already exist in the system with the same Evaporative/Refueling Family Name (EV-1) and Model Year (EV-1.5). | (EV-0.5) | Active | Not Under Development |
| VERIFY-3127 | Certification | Evaporative / Refueling Family | LD-CERT-EV-BR001b | If Process Code (EV-0.5) is equal to 'R' (Report) then a record must already exist in the system with the same Evaporative/Refueling Family Name (EV-1) and Model Year (EV-1.5). | If Process Code (EV-0.5) is equal to 'R' (Report) then a record must already exist in the system with the same Evaporative/Refueling Family Name (EV-1) and Model Year (EV-1.5). | (EV-0.5) | Active | Not Under Development |
| VERIFY-3128 | Certification | Evaporative / Refueling Family | LD-CERT-EV-BR002 | The Manufacturer Code embedded in the Evaporative/Refueling Family Name (EV-1) must match the Submitter's Manufacturer Code (in Submission Author Details). | The Manufacturer Code embedded in the Evaporative/Refueling Family Name (EV-1) must match the Submitter's Manufacturer Code (in Submission Author Details). | (EV-19) (EV-1) | Active | Not Under Development |
| VERIFY-3129 | Certification | Evaporative / Refueling Family | LD-CERT-EV-BR003 | The canister working capacity embedded in the Evaporative/Refueling Family (EV-1) must be a valid number. | The canister working capacity embedded in the Evaporative/Refueling Family (EV-1) must be a valid number. | (EV-1) | Active | Not Under Development |
| VERIFY-3130 | Certification | Evaporative / Refueling Family | LD-CERT-EV-BR005 | If Evaporative Summary Information (EVSI) Type (EV-2) equals 'N' (New) then a record must not exist in the system for this Evaporative/Refueling Family Name (EV-1) and Model Year (EV-1.5). | If Evaporative Summary Information (EVSI) Type (EV-2) equals 'N' (New) then a record must not exist in the system for this Evaporative/Refueling Family Name (EV-1) and Model Year (EV-1.5). | (EV-1) (EV-1.5) | Active | Not Under Development |
| VERIFY-3131 | Certification | Evaporative / Refueling Family | LD-CERT-EV-BR006 | If Fuel Tank Material (EV-7) is equal to 'P' (Plastic) or 'OT' (Other) then Fuel Tank Material Description (EV-8) is required. | If Fuel Tank Material (EV-7) is equal to 'P' (Plastic) or 'OT' (Other) then Fuel Tank Material Description (EV-8) is required. | (EV-8) | Active | Not Under Development |
| VERIFY-3132 | Certification | Evaporative / Refueling Family | LD-CERT-EV-BR007 | If Air Intake System Vapor Storage Device (EV-10) is equal to 'Y' (Yes) then Air Intake System Vapor Storage Device Description (EV-10.5) is required. | If Air Intake System Vapor Storage Device (EV-10) is equal to 'Y' (Yes) then Air Intake System Vapor Storage Device Description (EV-10.5) is required. | (EV-10.5) | Active | Not Under Development |
| VERIFY-3133 | Certification | Evaporative / Refueling Family | LD-CERT-EV-BR008 | If Number of Bleed Canisters (EV-15) is greater than '0' then Bleed Canister Total Working Capacity (EV-16) is required. | If Number of Bleed Canisters (EV-15) is greater than '0' then Bleed Canister Total Working Capacity (EV-16) is required. | (EV-16) | Active | Not Under Development |
| VERIFY-3134 | Certification | Evaporative / Refueling Family | LD-CERT-EV-BR009 | If the Process Code (EV-0.5) is equal to 'R' (Report) the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (EV-19) of the dataset for which the report was requested. | If the Process Code (EV-0.5) is equal to 'R' (Report) the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (EV-19) of the dataset for which the report was requested. | (EV-0.5) (EV-19) | Active | Not Under Development |
| VERIFY-3136 | Certification | Evaporative / Refueling Family | LD-CERT-EV-BR011 | If the Process Code (EV-0.5) is equal to 'N' (New) or 'C' (Correction) the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (EV-19) of the submitted dataset. | If the Process Code (EV-0.5) is equal to 'N' (New) or 'C' (Correction) the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (EV-19) of the submitted dataset. | (EV-19) | Active | Not Under Development |
| VERIFY-3137 | Certification | Evaporative / Refueling Family | LD-CERT-EV-BR012 | Manufacturer Code (EV-19) must exist in the system. | Manufacturer Code (EV-19) must exist in the system. | (EV-19) | Active | Not Under Development |
| VERIFY-3138 | Certification | Evaporative / Refueling Family | LD-CERT-EV-BR013 | If the Process Code (EV-0.5) is 'C' (Correction) then there cannot be any locked and active Certificate Summary Information Reports (CSIs) which reference this Evaporative/Refueling Family Name (EV-1). | If the Process Code (EV-0.5) is 'C' (Correction) then there cannot be any locked and active Certificate Summary Information Reports (CSIs) which reference this Evaporative/Refueling Family Name (EV-1). | (EV-0.5) (EV-1) | Active | Not Under Development |
| VERIFY-3350 | Certification | Evaporative / Refueling Family | LD-CERT-EV-BR014 | One of the Fuel(s) (EV-3.5) selected must be "Gasoline" (G), "Methanol" (M), "Ethanol" (E), "Compressed Natural Gas" (CNG), "Liquified Natural Gas" (LNG), or "Liquified Petroleum Gas" (LPG). | One of the Fuel(s) (EV-3.5) selected must be "Gasoline" (G), "Methanol" (M), "Ethanol" (E), "Compressed Natural Gas" (CNG), "Liquified Natural Gas" (LNG), or "Liquified Petroleum Gas" (LPG). | (EV-3.5) | Active | Not Under Development |
| VERIFY-3351 | Certification | Evaporative / Refueling Family | LD-CERT-EV-BR015 | If more than one fuel is selected for Fuel(s) (EV-3.5), then Multiple Fuel Storage (EV-3.6) is required, otherwise it is not allowed. | If more than one fuel is selected for Fuel(s) (EV-3.5), then Multiple Fuel Storage (EV-3.6) is required, otherwise it is not allowed. | (EV-3.6) | Active | Not Under Development |
| VERIFY-3353 | Certification | Evaporative / Refueling Family | LD-CERT-EV-BR017 | The selected value for Multiple Fuel Storage (EV-3.6) is not a valid value. | The selected value for Multiple Fuel Storage (EV-3.6) is not a valid value. | (EV-3.6) | Active | Not Under Development |
| VERIFY-22750 | Certification | Evaporative / Refueling Family | LD-CERT-EV-BR018 | If Leak Family Indicator (EV-20) equals 'Y' (Yes), then Leak Family Identifier (EV-23) is required; otherwise, it is not allowed. | If Leak Family Indicator (EV-20) equals 'Y' (Yes), then Leak Family Identifier (EV-23) is required; otherwise, it is not allowed. | (EV-23) | Not in the System | Under Development (To Be Added) |
| VERIFY-22751 | Certification | Evaporative / Refueling Family | LD-CERT-EV-BR019 | Leak Family Standard (EV-26) must be less than or equal to 0.040. | Leak Family Standard (EV-26) must be less than or equal to 0.040. | (EV-26) | Not in the System | Under Development (To Be Added) |
| VERIFY-22752 | Certification | Evaporative / Refueling Family | LD-CERT-EV-BR020 | If Canister Bleed Test Indicator (EV-21) equals 'Y' (Yes), then Applicability of Evaporative Canister Bleed Test (EV-28) is required; otherwise, it is not allowed. | If Canister Bleed Test Indicator (EV-21) equals 'Y' (Yes), then Applicability of Evaporative Canister Bleed Test (EV-28) is required; otherwise, it is not allowed. | (EV-28) | Not in the System | Under Development (To Be Added) |
| VERIFY-22753 | Certification | Evaporative / Refueling Family | LD-CERT-EV-BR021 | If CARB Fuel Only (Rig) Test Indicator (EV-22) equals 'Y' (Yes), then Applicability of CARB Fuel Only (Rig) Test (EV-30) is required; otherwise, it is not allowed. | If CARB Fuel Only (Rig) Test Indicator (EV-22) equals 'Y' (Yes), then Applicability of CARB Fuel Only (Rig) Test (EV-30) is required; otherwise, it is not allowed. | (EV-30) | Not in the System | Under Development (To Be Added) |
| VERIFY-3682 | Certification | Evaporative / Refueling Family | LD-CERT-EV-IB001 | The selected value for Fuel(s) (EV-3.5) is not a valid value. | The selected value for Fuel(s) (EV-3.5) is not a valid value. | (EV-3.5) | Active | Not Under Development |
| VERIFY-3139 | Certification | Test Group | LD-CERT-TG-BR001a | If Process Code (TG-0.5) equals 'C' (Correction) then a record must already exist in the system with the same Test Group Name (TG-2) and Model Year (TG-6). | If Process Code (TG-0.5) equals 'C' (Correction) then a record must already exist in the system with the same Test Group Name (TG-2) and Model Year (TG-6). | (TG-2) (TG-6) | Active | Not Under Development |
| VERIFY-3140 | Certification | Test Group | LD-CERT-TG-BR001b | If Process Code (TG-0.5) equals 'R' (Report) then a record must already exist in the system with the same Test Group Name (TG-2) and Model Year (TG-6). | If Process Code (TG-0.5) equals 'R' (Report) then a record must already exist in the system with the same Test Group Name (TG-2) and Model Year (TG-6). | (TG-2) (TG-6) | Active | Not Under Development |
| VERIFY-3141 | Certification | Test Group | LD-CERT-TG-BR002 | If CSI Type (TG-4) equals 'N' (New) then a record must not exist in the system for this Test Group Name (TG-2) and Model Year (TG-6). | If CSI Type (TG-4) equals 'N' (New) then a record must not exist in the system for this Test Group Name (TG-2) and Model Year (TG-6). | (TG-2) (TG-6) | Active | Not Under Development |
| VERIFY-3142 | Certification | Test Group | LD-CERT-TG-BR003 | If CSI Type (TG-4) equals 'R' (Running Change) then Running Change Reference Number (TG-5) is required. | If CSI Type (TG-4) equals 'R' (Running Change) then Running Change Reference Number (TG-5) is required. | (TG-5) | Active | Not Under Development |
| VERIFY-3143 | Certification | Test Group | LD-CERT-TG-BR004 | The Model Year (TG-6) must match the model year embedded in the Test Group Name (TG-2). | The Model Year (TG-6) must match the model year embedded in the Test Group Name (TG-2). | (TG-6) (TG-2) | Active | Not Under Development |
| VERIFY-3144 | Certification | Test Group | LD-CERT-TG-BR005 | The Manufacturer Code (TG-1) must match the manufacturer code embedded in the Test Group (TG-2). | The Manufacturer Code (TG-1) must match the manufacturer code embedded in the Test Group (TG-2). | (TG-1) (TG-2) | Active | Not Under Development |
| VERIFY-3145 | Certification | Test Group | LD-CERT-TG-BR006 | The displacement embedded in the Test Group (TG-2) must be a valid number. | The displacement embedded in the Test Group (TG-2) must be a valid number. | (TG-2) | Active | Not Under Development |
| VERIFY-3149 | Certification | Test Group | LD-CERT-TG-BR011 | If Model Year (TG-6) is greater than or equal to 2009 and the fifth character in the Test Group Name (TG-2) is equal to 'K' (Heavy Duty Vehicle) or if Model Year (TG-6) is less than 2009 and the fifth character in the Test Group Name (TG-2) is equal to 'D' (Heavy Duty Vehicle), then Federal Clean Fuel Vehicle (TG-9) must not be equal to 'Y' (Yes). | If Model Year (TG-6) is greater than or equal to 2009 and the fifth character in the Test Group Name (TG-2) is equal to 'K' (Heavy Duty Vehicle) or if Model Year (TG-6) is less than 2009 and the fifth character in the Test Group Name (TG-2) is equal to 'D' (Heavy Duty Vehicle), then Federal Clean Fuel Vehicle (TG-9) must not be equal to 'Y' (Yes). | (TG-9) | Active | Not Under Development |
| VERIFY-3150 | Certification | Test Group | LD-CERT-TG-BR012 | If Federal Clean Fuel Vehicle (TG-9) is equal to 'Y' (Yes) then Federal Clean Fuel Vehicle Standard (TG-10) is required, otherwise it must not be present. | If Federal Clean Fuel Vehicle (TG-9) is equal to 'Y' (Yes) then Federal Clean Fuel Vehicle Standard (TG-10) is required, otherwise it must not be present. | (TG-10) | Active | Not Under Development |
| VERIFY-3151 | Certification | Test Group | LD-CERT-TG-BR013 | If Federal Clean Fuel Vehicle (TG-9) is equal to 'Y' (Yes) then Federal Clean Fuel Vehicle ILEV (TG-11) is required, otherwise it must not be present or must be equal to 'N' (No). | If Federal Clean Fuel Vehicle (TG-9) is equal to 'Y' (Yes) then Federal Clean Fuel Vehicle ILEV (TG-11) is required, otherwise it must not be present or must be equal to 'N' (No). | (TG-11) | Active | Not Under Development |
| VERIFY-3153 | Certification | Test Group | LD-CERT-TG-BR015 | If EPA Vehicle Class (TG-16) is equal to 'M6' (MDV6- CA LEV2 MDV GVW 8,501-10,000) or 'M7' (MDV7- CA LEV2 MDV GVW 10,001-14,000) then Certification Region Code (TG-14) must contain 'CA' (California + 177 States). | If EPA Vehicle Class (TG-16) is equal to 'M6' (MDV6- CA LEV2 MDV GVW 8,501-10,000) or 'M7' (MDV7- CA LEV2 MDV GVW 10,001-14,000) then Certification Region Code (TG-14) must contain 'CA' (California + 177 States). | (TG-14) | Active | Not Under Development |
| VERIFY-3154 | Certification | Test Group | LD-CERT-TG-BR016 | The Vehicle Class (TG-205) cannot be equal to 'LDVT' (LDV + LDT1) at the Test Group Exhaust Emission Standard Level. | The Vehicle Class (TG-205) cannot be equal to 'LDVT' (LDV + LDT1) at the Test Group Exhaust Emission Standard Level. | (TG-205) | Active | Not Under Development |
| VERIFY-3157 | Certification | Test Group | LD-CERT-TG-BR019 | If OBD Compliance Type (TG-19) is equal to 'F' (Federal) then Certification Region Code (TG-14) cannot be equal to 'CA' (California + 177 States). | If OBD Compliance Type (TG-19) is equal to 'F' (Federal) then Certification Region Code (TG-14) cannot be equal to 'CA' (California + 177 States). | (TG-14) | Active | Not Under Development |
| VERIFY-3158 | Certification | Test Group | LD-CERT-TG-BR020 | Number of Test Group OBD Deficiencies (TG-22) can be equal to 0 only if Test Group OBD Compliance Level (TG-21) is equal to 'F' (Full- No Deficiencies). | Number of Test Group OBD Deficiencies (TG-22) can be equal to 0 only if Test Group OBD Compliance Level (TG-21) is equal to 'F' (Full- No Deficiencies). | (TG-22) | Active | Not Under Development |
| VERIFY-3161 | Certification | Test Group | LD-CERT-TG-BR023 | If Hybrid Type (TG-26) is equal to 'OT' (Other) then Hybrid Type Other Description (TG-27) must be present. | If Hybrid Type (TG-26) is equal to 'OT' (Other) then Hybrid Type Other Description (TG-27) must be present. | (TG-27) | Active | Not Under Development |
| VERIFY-3162 | Certification | Test Group | LD-CERT-TG-BR024 | If Engine Type (TG-28) is equal to 'GT' (Gas Turbine), 'RK' (Rankine), 'STIR' (Stirling) or 'OT' (Other) then Engine Type Description (TG-29) is required. | If Engine Type (TG-28) is equal to 'GT' (Gas Turbine), 'RK' (Rankine), 'STIR' (Stirling) or 'OT' (Other) then Engine Type Description (TG-29) is required. | (TG-29) | Active | Not Under Development |
| VERIFY-3166 | Certification | Test Group | LD-CERT-TG-BR027 | If Engine Block Arrangement (TG-30) is equal to 'OT' (Other) then Engine Block Arrangement Description if Other (TG-31) is required. | If Engine Block Arrangement (TG-30) is equal to 'OT' (Other) then Engine Block Arrangement Description if Other (TG-31) is required. | (TG-31) | Active | Not Under Development |
| VERIFY-3169 | Certification | Test Group | LD-CERT-TG-BR030a | If Engine Type (TG-28) is equal to '4SI' (4-Stroke Spark Ignition), '2SI' (2-Stroke Spark Ignition), '4SCI' (4-Stroke Compression Ignition), '2SCI' (2-Stroke Compression Ignition) or 'RT' (Rotary) then Engine Displacement (TG-38) and Air Aspiration Method (TG-47) are required. | If Engine Type (TG-28) is equal to '4SI' (4-Stroke Spark Ignition), '2SI' (2-Stroke Spark Ignition), '4SCI' (4-Stroke Compression Ignition), '2SCI' (2-Stroke Compression Ignition) or 'RT' (Rotary) then Engine Displacement (TG-38) and Air Aspiration Method (TG-47) are required. | (TG-38) (TG-47) | Active | Not Under Development |
| VERIFY-3170 | Certification | Test Group | LD-CERT-TG-BR031 | If Engine Type (TG-28) is equal to '4SI' (4-Stroke Spark Ignition), '2SI' (2-Stroke Spark Ignition), '4SCI' (4-Stroke Compression Ignition), or '2SCI' (2-Stroke Compression Ignition) then Cylinder Deactivation (TG-39), Variable Valve Timing (TG-41), Variable Valve Lift (TG-43), Number of Inlet Valves per Cylinder (TG-45), and Number of Exhaust Valves Per Cylinder (TG-46) are required. | If Engine Type (TG-28) is equal to '4SI' (4-Stroke Spark Ignition), '2SI' (2-Stroke Spark Ignition), '4SCI' (4-Stroke Compression Ignition), or '2SCI' (2-Stroke Compression Ignition) then Cylinder Deactivation (TG-39), Variable Valve Timing (TG-41), Variable Valve Lift (TG-43), Number of Inlet Valves per Cylinder (TG-45), and Number of Exhaust Valves Per Cylinder (TG-46) are required. | (TG-39) (TG-41) (TG-43) (TG-45) (TG-46) | Active | Not Under Development |
| VERIFY-3171 | Certification | Test Group | LD-CERT-TG-BR032 | If Cylinder Deactivation (TG-39) is equal to 'Y' (Yes) then Cylinder Deactivation Description (TG-40) is required. | If Cylinder Deactivation (TG-39) is equal to 'Y' (Yes) then Cylinder Deactivation Description (TG-40) is required. | (TG-40) | Active | Not Under Development |
| VERIFY-3172 | Certification | Test Group | LD-CERT-TG-BR033 | If Variable Valve Timing (TG-41) is equal to 'Y' (Yes) then Variable Valve Timing System Description (TG-42) is required. | If Variable Valve Timing (TG-41) is equal to 'Y' (Yes) then Variable Valve Timing System Description (TG-42) is required. | (TG-42) | Active | Not Under Development |
| VERIFY-3173 | Certification | Test Group | LD-CERT-TG-BR034 | If Variable Valve Lift (TG-43) is equal to 'Y' (Yes) then Variable Valve Lift System Description (TG-44) is required. | If Variable Valve Lift (TG-43) is equal to 'Y' (Yes) then Variable Valve Lift System Description (TG-44) is required. | (TG-44) | Active | Not Under Development |
| VERIFY-3174 | Certification | Test Group | LD-CERT-TG-BR035 | If Air Aspiration Device Method (TG-47) is equal to 'OT' (Other) then Air Aspiration Method If Other (TG-50) is required. | If Air Aspiration Device Method (TG-47) is equal to 'OT' (Other) then Air Aspiration Method If Other (TG-50) is required. | (TG-50) | Active | Not Under Development |
| VERIFY-3178 | Certification | Test Group | LD-CERT-TG-BR037 | If After Treatment Device Precious Metal Type (TG-57) is equal to 'OT' (Other) then After Treatment Device Precious Metal Type Other Description (TG-58) is required. | If After Treatment Device Precious Metal Type (TG-57) is equal to 'OT' (Other) then After Treatment Device Precious Metal Type Other Description (TG-58) is required. | (TG-58) | Active | Not Under Development |
| VERIFY-3179 | Certification | Test Group | LD-CERT-TG-BR038 | If Substrate Construction (TG-60) is equal to 'OT' (Other) then Substrate Construction Other Description (TG-102) is required. | If Substrate Construction (TG-60) is equal to 'OT' (Other) then Substrate Construction Other Description (TG-102) is required. | (TG-102) | Active | Not Under Development |
| VERIFY-3182 | Certification | Test Group | LD-CERT-TG-BR040 | If Air Fuel Sensor Type (TG-63) is equal to 'OT' (Other) then Air Fuel Sensor Type Other (TG-64) is required. | If Air Fuel Sensor Type (TG-63) is equal to 'OT' (Other) then Air Fuel Sensor Type Other (TG-64) is required. | (TG-64) | Active | Not Under Development |
| VERIFY-3184 | Certification | Test Group | LD-CERT-TG-BR042 | If Energy Storage Device (TG-77) is equal to 'OT' (Other) then Energy Storage Device If Other (TG-78) is required. | If Energy Storage Device (TG-77) is equal to 'OT' (Other) then Energy Storage Device If Other (TG-78) is required. | (TG-78) | Active | Not Under Development |
| VERIFY-3188 | Certification | Test Group | LD-CERT-TG-BR046 | A Capacitor Rating (TG-87) must be present for each capacitor identified in the Number of Capacitors (TG-86). | A Capacitor Rating (TG-87) must be present for each capacitor identified in the Number of Capacitors (TG-86). | (TG-87) | Active | Not Under Development |
| VERIFY-3190 | Certification | Test Group | LD-CERT-TG-BR048 | If Regenerative Braking Type (TG-90) is equal to 'OT' (Other) then Regenerative Braking Type Other Description (TG-91) is required. | If Regenerative Braking Type (TG-90) is equal to 'OT' (Other) then Regenerative Braking Type Other Description (TG-91) is required. | (TG-91) | Active | Not Under Development |
| VERIFY-3191 | Certification | Test Group | LD-CERT-TG-BR049 | If Regenerative Braking Type (TG-90) is not equal to 'NA' (Not Applicable) then Regenerative Braking Source (TG-92) and Driver Controlled Regenerative Braking (TG-93) are required, otherwise they are not allowed. |
If Regenerative Braking Type (TG-90) is not equal to 'NA' (Not Applicable) then Regenerative Braking Source (TG-92) and Driver Controlled Regenerative Braking (TG-93) are required, otherwise they are not allowed. |
(TG-92) (TG-93) | Active | Not Under Development |
| VERIFY-3192 | Certification | Test Group | LD-CERT-TG-BR050 | If Hybrid Type (TG-26) is equal to 'EM' (IC Engine/Electric Motor) then Number of Drive Motor Generators (TG-94) is required. | If Hybrid Type (TG-26) is equal to 'EM' (IC Engine/Electric Motor) then Number of Drive Motor Generators (TG-94) is required. | (TG-94) | Active | Not Under Development |
| VERIFY-3193 | Certification | Test Group | LD-CERT-TG-BR051 | If Motor Generator Type (TG-95) is equal to 'OT' (Other) then Other Motor Generator Type Other Description (TG-96) is required. | If Motor Generator Type (TG-95) is equal to 'OT' (Other) then Other Motor Generator Type Other Description (TG-96) is required. | (TG-96) | Active | Not Under Development |
| VERIFY-3194 | Certification | Test Group | LD-CERT-TG-BR052 | A Motor Generator Type (TG-95) and Rated Motor Generator Power (TG-97) are required for each Drive Motor Generator identified in the Number of Drive Motor Generators (TG-94) and not allowed if Number of Drive Motor Generators (TG-94) equals 0. ( Number of Drive Motor Generators Identified: | A Motor Generator Type (TG-95) and Rated Motor Generator Power (TG-97) are required for each Drive Motor Generator identified in the Number of Drive Motor Generators (TG-94) and not allowed if Number of Drive Motor Generators (TG-94) equals 0. ( Number of Drive Motor Generators Identified: | (TG-95) (TG-97) | Active | Not Under Development |
| VERIFY-3197 | Certification | Test Group | LD-CERT-TG-BR055 | If Fuel Cell On board H2 Storage Capacity (TG-99) is present then Usable H2 Fill Capacity (TG-100) is required, otherwise (TG-100) is not allowed. | If Fuel Cell On board H2 Storage Capacity (TG-99) is present then Usable H2 Fill Capacity (TG-100) is required, otherwise (TG-100) is not allowed. | (TG-100) | Active | Not Under Development |
| VERIFY-3198 | Certification | Test Group | LD-CERT-TG-BR056 | The provided Evaporative Test Number(s) (TG-202) must exist in the system. | The provided Evaporative Test Number(s) (TG-202) must exist in the system. | (TG-202) | Active | Not Under Development |
| VERIFY-3199 | Certification | Test Group | LD-CERT-TG-BR057 | If SFTP Compliance Indicator (TG-216.8) is equal to 'Y' (Yes) and Test Group Fuel (TG-217.1) equals fuel other than 'EL' (Electricity) , 'H' (Hydrogen), 'HYD' (Hydraulic), then FTP Test Number (for SFTP Composite Calculation) (TG-217) is required. | If SFTP Federal Compliance Identifier (TG-216.8) does not equal 'NA' (Not Applicable) and Test Group Fuel (TG-217.1) equals fuel other than 'EL' (Electricity) or 'HYD' (Hydraulic), then FTP Test number (for SFTP Composite Calculation) (TG-217) is required. | (TG-217) | Active | Under Development (To Be Updated) |
| VERIFY-3200 | Certification | Test Group | LD-CERT-TG-BR058 | If the SFTP Compliance Indicator (TG-216.8) is 'Y' (Yes) then the provided FTP Test Number (TG-217) must exist in the system with a Test Category (TI-43) of 'FTP' (Test Procedures (TI-8) = 2, 11, 21, 25, 31, 35, 41, 45). | If SFTP Federal Compliance Indicator (TG-216.8) does not equal 'NA' (Not Applicable), then the provided FTP Test Number (TG-217) must exist in the system with a Test Category (TI-43) of 'FTP' (Test Procedures (TI-8) = 2, 11, 21, 25, 31, 35, 41, 45). | (TG-217) | Active | Under Development (To Be Deleted) |
| VERIFY-3201 | Certification | Test Group | LD-CERT-TG-BR059 | If the SFTP Compliance Indicator (TG-216.8) is 'Y' (Yes) then the provided US06 Test Number (TG-218) must exist in the system with a Test Category (TI-43) of 'US06' (Test Procedures (TI-8) = 90). | If the SFTP Federal Compliance Identifier (TG-216.8) does not equal 'NA' (Not Applicable), then the provided US06 Test Number (TG-218) must exist in the system with a Test Category (TI-43) of 'US06' (Test Procedures (TI-8) = 16, 90, and 96). | (TG-218) | Active | Under Development (To Be Updated) |
| VERIFY-3202 | Certification | Test Group | LD-CERT-TG-BR060 | If the SFTP Compliance Indicator (TG-216.8) is 'Y' (Yes) then the provided SC03 Test Number (TG-219) must exist in the system with a Test Category (TI-43) of 'SC03' (Test Procedures (TI-8) = 95). | If the SFTP Federal Compliance Identifier (TG-216.8) does not equal 'NA' (Not Applicable), then the provided SC03 Test Number (TG-219) must exist in the system with a Test Category (TI-43) of 'SC03' (Test Procedures (TI-8) = 95). | (TG-219) | Active | Under Development (To Be Updated) |
| VERIFY-3203 | Certification | Test Group | LD-CERT-TG-BR061 | If the SFTP Compliance Indicator (TG-216.8) is 'N' (No) then the SFTP CO Option (TG-216.9) must not be 'Y' (Yes). | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'NA' (Not Applicable), then the SFTP Tier 2 Composite CO Option (TG-216.9) must not equal 'Y' (Yes). | (TG-216.9) | Active | Under Development (To Be Updated) |
| VERIFY-3204 | Certification | Test Group | LD-CERT-TG-BR062a | If the SFTP Compliance Indicator (TG-216.8) is 'Y' (Yes) then the FTP test number (TG-217) must identify a test that has HC-NM (Non-Methane Hydrocarbon) and NOX (Nitrogen Oxides) emission results (TI-19) or must identify a test that has 'NMOG+NOX' (Non-Methane Organic Gas + Nitrogen Oxides) (TI-19). | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER2' (Tier 2), then the Official FTP Test Number (TG-217) must identify a test that has HC-NM (Non-Methane Hydrocarbon) and NOX (Nitrogen Oxides) emission results (TI-19). | (TG-217) (TI-19) | Active | Under Development (To Be Updated) |
| VERIFY-3205 | Certification | Test Group | LD-CERT-TG-BR062b | If the SFTP Compliance Indicator (TG-216.8) is 'Y' (Yes) then the US06 test number (TG-218) must identify a test that has HC-NM (Non-Methane Hydrocarbon) and NOX (Nitrogen Oxides) emission results (TI-19) or must identify a test that has 'NMOG+NOX' (Non-Methane Organic Gas + Nitrogen Oxides) (TI-19). | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER2' (Tier 2), then the Official US06 Test Number (TG-218) must identify a test that has HC-NM (Non-Methane Hydrocarbon) and NOX (Nitrogen Oxides) emission results (TI-19). | (TG-218) (TI-19) | Active | Under Development (To Be Updated) |
| VERIFY-3206 | Certification | Test Group | LD-CERT-TG-BR062c | If the SFTP Compliance Indicator (TG-216.8) is 'Y' (Yes) then the SC03 test number (TG-219) must identify a test that has HC-NM (Non-Methane Hydrocarbon) and NOX (Nitrogen Oxides) emission results (TI-19) or must identify a test that has 'NMOG+NOX' (Non-Methane Organic Gas + Nitrogen Oxides) (TI-19). | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER2' (Tier 2), then the Official SC03 Test Number (TG-219) must identify a test that has HC-NM (Non-Methane Hydrocarbon) and NOX (Nitrogen Oxides) emission results (TI-19). | (TG-219) (TI-19) | Active | Under Development (To Be Updated) |
| VERIFY-3207 | Certification | Test Group | LD-CERT-TG-BR063a | If the SFTP Composite CO Option (TG-216.9) is 'Y' (Yes) then the FTP test number (TG-217) must identify a test that has CO (Carbon Monoxide) emission results (TI-19). | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER3' (Tier 3) or the SFTP Tier 2 Composite CO Option (TG-216.9) equals 'Y' (Yes), then the FTP test number (TG-217) must identify a test that has CO (Carbon Monoxide) emission results (TI-19). | (TG-217) | Active | Under Development (To Be Updated) |
| VERIFY-3208 | Certification | Test Group | LD-CERT-TG-BR063b | If the SFTP Composite CO Option (TG-216.9) is 'Y' (Yes) then the US06 test number (TG-218) must identify a test that has CO (Carbon Monoxide) emission results (TI-19). | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER3' (Tier 3) or the SFTP Tier 2 Composite CO Option (TG-216.9) is 'Y' (Yes), then the US06 test number (TG-218) must identify a test that has CO (Carbon Monoxide) emission results (TI-19). | (TG-218) | Active | Under Development (To Be Updated) |
| VERIFY-3209 | Certification | Test Group | LD-CERT-TG-BR063c | If the SFTP Composite CO Option (TG-216.9) is 'Y' (Yes) then the SC03 test number (TG-219) must identify a test that has CO (Carbon Monoxide) emission results (TI-19). | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER3' (Tier 3) or the SFTP Tier 2 Composite CO Option (TG-216.9) is 'Y' (Yes), then the SC03 test number (TG-219) must identify a test that has CO (Carbon Monoxide) emission results (TI-19). | (TG-219) | Active | Under Development (To Be Updated) |
| VERIFY-3210 | Certification | Test Group | LD-CERT-TG-BR064a | If the SFTP Compliance Indicator (TG-216.8) is 'Y' (Yes) then there must be at least one exhaust emission standard with the Test Result/Emission Name (TG-209) of 'HC-NM+NOX-COMP' (Non-Methane Hydrocarbon + Nitrogen Oxides SFTP Composite) or 'NMOG+NOX-COMP' (Non-Methane Organic Gas + Nitrogen Oxides SFTP Composite). | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER2' (Tier 2), then there must be at least one exhaust emission standard with the Test Result/Emission Name (TG-209) of 'HC-NM+NOX-COMP' (Non-Methane Hydrocarbon + Nitrogen Oxides SFTP Composite). | (TG-209) | Active | Under Development (To Be Updated) |
| VERIFY-3211 | Certification | Test Group | LD-CERT-TG-BR064b | If the SFTP Compliance Indicator (TG-216.8) is 'Y' (Yes) then for each HC-NM+NOX-COMP (Non-Methane Hydrocarbon + NOx SFTP Composite) emission standard, there must also be a NOX (Nitrogen Oxides) exhaust emission standard with the same Cert/In Use Code (TG-200.5) and Useful Life (TG-210) as the HC-NM+NOX-COMP standard, and the same test procedure as the test identified by the FTP test number (TG-217). | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER2' (Tier 2), then for each HC-NM+NOX-COMP (Non-Methane Hydrocarbon + NOx SFTP Composite) emission standard, there must also be a NOX (Nitrogen Oxides) exhaust emission standard with the same Cert/In Use Code (TG-200.5) and Useful Life (TG-210) as the HC-NM+NOX-COMP standard, and the same test procedure as the test identified by the FTP test number (TG-217). | (TG-200.5) (TG-210) (TG-217) | Active | Under Development (To Be Updated) |
| VERIFY-3212 | Certification | Test Group | LD-CERT-TG-BR064c | If the SFTP Compliance Indicator (TG-216.8) is 'Y' (Yes) then for each HC-NM+NOX-COMP (Non-Methane Hydrocarbon + NOx SFTP Composite) emission standard, there must also be either HC-NM (Non-Methane Hydrocarbon) or NMOG (Non-Methane Organic Gases) exhaust emission standards with the same Cert/In Use Code (TG-200.5) and Useful Life (TG-210) as the HC-NM+NOX-COMP standard, and the same test procedure as the test identified by the FTP test number (TG-217). | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER2' (Tier 2), then for each HC-NM+NOX-COMP (Non-Methane Hydrocarbon + NOx SFTP Composite) emission standard, there must also be either HC-NM (Non-Methane Hydrocarbon) or NMOG (Non-Methane Organic Gases) exhaust emission standards with the same Cert/In Use Code (TG-200.5) and Useful Life (TG-210) as the HC-NM+NOX-COMP standard, and the same test procedure as the test identified by the FTP test number (TG-217). | (TG-200.5) (TG-210) (TG-217) | Active | Under Development (To Be Updated) |
| VERIFY-3213 | Certification | Test Group | LD-CERT-TG-BR065a | If the SFTP Compliance Indicator (TG-216.8) is 'Y' (Yes) and the SFTP CO Option (TG-216.9) is 'Y' (Yes) then there must be at least one exhaust emission standard with the Test Result/Emission Name (TG-209) of CO-COMP (CO SFTP Composite). | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER3' (Tier 3) or the SFTP Tier 2 Composite CO Option (TG-216.9) is 'Y' (Yes) or the SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then there must be at least one exhaust emission standard with the Test Result/Emission Name (TG-209) of CO-COMP (CO SFTP Composite). | (TG-209) | Active | Under Development (To Be Updated) |
| VERIFY-3214 | Certification | Test Group | LD-CERT-TG-BR065b | If the SFTP Compliance Indicator (TG-216.8) is 'Y' (Yes) and the SFTP CO Option (TG-216.9) is 'Y' (Yes) then for each CO-COMP (CO SFTP Composite) emission standard, there must also be a CO (Carbon Monoxide) exhaust emission standard with the same Cert/In Use Code (TG-200.5) and Useful Life (TG-210) as the CO-COMP standard, and the same test procedure as the test identified by the FTP test number (TG-217). | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER3' (Tier 3) or the SFTP Tier 2 Composite CO Option (TG-216.9) is 'Y' (Yes) then for each CO-COMP (CO SFTP Composite) emission standard, there must also be a CO (Carbon Monoxide) exhaust emission standard with the same Cert/In Use Code (TG-200.5) and Useful Life (TG-210) as the CO-COMP standard, and the same test procedure as the test identified by the FTP test number (TG-217). | (TG-200.5) (TG-210) (TG-217) | Active | Under Development (To Be Updated) |
| VERIFY-22889 | Certification | Test Group | LD-CERT-TG-BR065c | If the SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then for each CO-COMP (CO SFTP Composite) emission standard, there must also be a CO (Carbon Monoxide) exhaust emission standard with the same Cert/In Use Code (TG-200.5) and Useful Life (TG-210) as the CO-COMP standard, and the same test procedure as the test identified by the Official SFTP LEV-III FTP Test Number (TG-263). | If the SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then for each CO-COMP (CO SFTP Composite) emission standard, there must also be a CO (Carbon Monoxide) exhaust emission standard with the same Cert/In Use Code (TG-200.5) and Useful Life (TG-210) as the CO-COMP standard, and the same test procedure as the test identified by the Official SFTP LEV-III FTP Test Number (TG-263). | (TG-200.5) (TG-210) (TG-263) | Not in the System | Under Development (To Be Added) |
| VERIFY-3215 | Certification | Test Group | LD-CERT-TG-BR066 | If a PM-COMP (PM SFTP Composite) emission standard Test Result/Emission Name (TG-209) is provided, there must also be a PM (Particulate Matter) exhaust emission standard with the same Cert/In Use Code (TG-200.5) and Useful Life (TG-210) as the PM-COMP standard, and the same test procedure as the test identified by the FTP test number (TG-217). | If a PM-COMP (PM SFTP Composite) emission standard Test Result/Emission Name (TG-209) is provided, there must also be a PM (Particulate Matter) exhaust emission standard with the same Cert/In Use Code (TG-200.5) and Useful Life (TG-210) as the PM-COMP standard, and the same test procedure as the test identified by the FTP test number (TG-217). | (TG-200.5) (TG-210) (TG-217) | Active | Not Under Development |
| VERIFY-3216 | Certification | Test Group | LD-CERT-TG-BR067 | If the Manufacturer Code (TG-300) of the owner of the carline is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the carline. | If the Manufacturer Code (TG-300) of the owner of the carline is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the carline. | (TG-300) | Active | Not Under Development |
| VERIFY-3217 | Certification | Test Group | LD-CERT-TG-BR068 | If Transmission Type (TG-307) is equal to 'OT' (Other) then Other Transmission Type Description (TG-308) is required. | If Transmission Type (TG-307) is equal to 'OT' (Other) then Other Transmission Type Description (TG-308) is required. | (TG-308) | Active | Not Under Development |
| VERIFY-3218 | Certification | Test Group | LD-CERT-TG-BR069 | If the Process Code (TG-0.5) is equal to 'R' (Report) the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (TG-1) of the dataset for which the report was requested. | If the Process Code (TG-0.5) is equal to 'R' (Report) the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (TG-1) of the dataset for which the report was requested. | (TG-1) | Active | Not Under Development |
| VERIFY-3219 | Certification | Test Group | LD-CERT-TG-BR070 | If the Process Code (TG-0.5) is equal to 'N' (New) or 'C' (Correction) then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (TG-1) of the submitted dataset. | If the Process Code (TG-0.5) is equal to 'N' (New) or 'C' (Correction) then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (TG-1) of the submitted dataset. | (TG-1) | Active | Not Under Development |
| VERIFY-3223 | Certification | Test Group | LD-CERT-TG-BR073a | If Air Aspiration Method (TG-47) is equal to 'TC' (Turbocharged), 'SC' (Supercharged), 'TS' (Turbocharged and Supercharged) or 'OT' (Other), then Number of Air Aspiration Devices (TG-48) is required, otherwise it must be equal to 0, if present. | If Air Aspiration Method (TG-47) is equal to 'TC' (Turbocharged), 'SC' (Supercharged), 'TS' (Turbocharged and Supercharged) or 'OT' (Other), then Number of Air Aspiration Devices (TG-48) is required, otherwise it must be equal to 0, if present. | (TG-48) | Active | Not Under Development |
| VERIFY-9388 | Certification | Test Group | LD-CERT-TG-BR073b | If Air Aspiration Method (TG-47) is equal to 'TC' (Turbocharged), 'SC' (Supercharged), 'TS' (Turbocharged and Supercharged) or 'OT' (Other), then Number of Air Aspiration Devices (TG-48) is required, otherwise it must be equal to 0, if present. | If Air Aspiration Method (TG-47) is equal to 'TC' (Turbocharged), 'SC' (Supercharged), 'TS' (Turbocharged and Supercharged) or 'OT' (Other), then Number of Air Aspiration Devices (TG-48) is required, otherwise it must be equal to 0, if present. | (TG-48) | Active | Not Under Development |
| VERIFY-3225 | Certification | Test Group | LD-CERT-TG-BR075 | If Air Aspiration Device Configuration (TG-49) is equal to 'N' (Single), then Number of Air Aspiration Devices (TG-48) must be 1. | If Air Aspiration Device Configuration (TG-49) is equal to 'N' (Single), then Number of Air Aspiration Devices (TG-48) must be 1. | (TG-48) | Active | Not Under Development |
| VERIFY-3226 | Certification | Test Group | LD-CERT-TG-BR076 | If Air Aspiration Device Configuration (TG-49) is not equal to 'N' (Single), then Number of Air Aspiration Devices (TG-48) must be Engine Configuration Number (TG-36). | If Air Aspiration Device Configuration (TG-49) is not equal to 'N' (Single), then Number of Air Aspiration Devices (TG-48) must be Engine Configuration Number (TG-36). | (TG-48) | Active | Not Under Development |
| VERIFY-3227 | Certification | Test Group | LD-CERT-TG-BR077 | If Fuel (TG-204) is equal to 'D' (Diesel), then Upward Diesel Adjustment Factor (TG-215.5) is required. | If Fuel (TG-204) is equal to 'D' (Diesel), then Upward Diesel Adjustment Factor (TG-215.5) is required. | (TG-215.5) | Active | Not Under Development |
| VERIFY-3228 | Certification | Test Group | LD-CERT-TG-BR078 | If Fuel (TG-204) is equal to 'D' (Diesel), then Downward Diesel Adjustment Factor (TG-215.6) is required. | If Fuel (TG-204) is equal to 'D' (Diesel), then Downward Diesel Adjustment Factor (TG-215.6) is required. | (TG-215.6) | Active | Not Under Development |
| VERIFY-3229 | Certification | Test Group | LD-CERT-TG-BR079 | The Manufacturer Code embedded in the Test Group Name (TG-2) must match the Submitter's Manufacturer Code (in Submission Author Details). | The Manufacturer Code embedded in the Test Group Name (TG-2) must match the Submitter's Manufacturer Code (in Submission Author Details). | (TG-2) | Active | Not Under Development |
| VERIFY-3230 | Certification | Test Group | LD-CERT-TG-BR080a | If the SFTP Compliance Indicator (TG-216.8) is 'Y' (Yes) and there is an exhaust emission standard entered with the emission name (TG-209) of PM-COMP (PM SFTP Composite), then the FTP test number (TG-217) must identify a test that has a PM emission result (TI-19). | If the SFTP Federal Compliance Identifier (TG-216.8) is 'TIER2' (Tier 2) and there is an exhaust emission standard entered with the emission name (TG-209) of PM-COMP (PM SFTP Composite), then the FTP test number (TG-217) must identify a test that has a PM emission result (TI-19). | (TG-217) | Active | Under Development (To Be Updated) |
| VERIFY-3231 | Certification | Test Group | LD-CERT-TG-BR080b | If the SFTP Compliance Indicator (TG-216.8) is 'Y' (Yes) and there is an exhaust emission standard entered with the emission name (TG-209) of PM-COMP (PM SFTP Composite), then the US06 test number (TG-218) must identify a test that has a PM emission result (TI-19). | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER2' (Tier 2) and there is an exhaust emission standard entered with the emission name (TG-209) of PM-COMP (PM SFTP Composite), then the US06 test number (TG-218) must identify a test that has a PM emission result (TI-19). | (TG-218) | Active | Under Development (To Be Updated) |
| VERIFY-3232 | Certification | Test Group | LD-CERT-TG-BR080c | If the SFTP Compliance Indicator (TG-216.8) is 'Y' (Yes) and there is an exhaust emission standard entered with the emission name (TG-209) of PM-COMP (PM SFTP Composite), then the SC03 test number (TG-219) must identify a test that has a PM emission result (TI-19). | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER2' (Tier 2), and there is an exhaust emission standard entered with the emission name (TG-209) of PM-COMP (PM SFTP Composite), then the SC03 test number (TG-219) must identify a test that has a PM emission result (TI-19). | (TG-219) | Active | Under Development (To Be Updated) |
| VERIFY-3233 | Certification | Test Group | LD-CERT-TG-BR081a | There must be at least one Exhaust Standard that meets the following criteria: a Test Result/Emission Name (TG-209) of 'CO' (Carbon Monoxide); a Test Procedure (TG-204.5) with a Test Category (TG-203) of 'FTP' (Test Procedures (TI-8) equal to 2, 11, 21, 25, 31, 35, 41, 45, 51, 52); a Cert Region Code (TG-200) of 'FA' (Federal) if there are federal sales for this test group (Cert Region Code (TG-14) of 'FA' (Federal)), or a Cert Region Code (TG-200) of 'CA' if there are only California Sales for this test group. | There must be at least one Exhaust Standard that meets the following criteria: a Test Result/Emission Name (TG-209) of 'CO' (Carbon Monoxide); a Test Procedure (TG-204.5) with a Test Category (TG-203) of 'FTP' (Test Procedures (TI-8) equal to 2, 11, 21, 25, 31, 35, 41, 45, 51, 52); a Cert Region Code (TG-200) of 'FA' (Federal) if there are federal sales for this test group (Cert Region Code (TG-14) of 'FA' (Federal)), or a Cert Region Code (TG-200) of 'CA' if there are only California Sales for this test group. | (TG-201) | Active | Not Under Development |
| VERIFY-3234 | Certification | Test Group | LD-CERT-TG-BR081b | There must be at least one Exhaust Standard that meets the following criteria: a Test Result/Emission Name (TG-209) of 'CO' (Carbon Monoxide); a Test Procedure (TG-204.5) with a Test Category (TG-203) of 'FTP' (Test Procedures (TI-8) equal to 2, 11, 21, 25, 31, 35, 41, 45, 51, 52); a Cert Region Code (TG-200) of 'FA' (Federal) if there are federal sales for this test group (Cert Region Code (TG-14) of 'FA' (Federal)), or a Cert Region Code (TG-200) of 'CA' if there are only California Sales for this test group. | There must be at least one Exhaust Standard that meets the following criteria: a Test Result/Emission Name (TG-209) of 'CO' (Carbon Monoxide); a Test Procedure (TG-204.5) with a Test Category (TG-203) of 'FTP' (Test Procedures (TI-8) equal to 2, 11, 21, 25, 31, 35, 41, 45, 51, 52); a Cert Region Code (TG-200) of 'FA' (Federal) if there are federal sales for this test group (Cert Region Code (TG-14) of 'FA' (Federal)), or a Cert Region Code (TG-200) of 'CA' if there are only California Sales for this test group. | (TG-201) | Active | Not Under Development |
| VERIFY-3236 | Certification | Test Group | LD-CERT-TG-BR083 | If Air Aspiration Method (TG-47) is not equal to 'NA' (Naturally Aspirated) then Charge Air Cooler Type (TG-51) is required. | If Air Aspiration Method (TG-47) is not equal to 'NA' (Naturally Aspirated) then Charge Air Cooler Type (TG-51) is required. | (TG-51) | Active | Not Under Development |
| VERIFY-3237 | Certification | Test Group | LD-CERT-TG-BR084 | If requesting a CSI Report then a record must already exist in the system with the same Test Group Name (TG-2), Evaporative/Refueling Family Name (TG-3) and Model Year (TG-6). | If requesting a CSI Report then a record must already exist in the system with the same Test Group Name (TG-2), Evaporative/Refueling Family Name (TG-3) and Model Year (TG-6). | (TG-2) (TG-3) (TG-6) | Active | Not Under Development |
| VERIFY-3241 | Certification | Test Group | LD-CERT-TG-BR088 | The provided Exhaust Test Number(s) (TG-202.5) must exist in the system. | The provided Exhaust Test Number(s) (TG-202.5) must exist in the system. | (TG-202.5) | Active | Not Under Development |
| VERIFY-3242 | Certification | Test Group | LD-CERT-TG-BR089 | The provided Carline Manufacturer Code (TG-300), Division Code (TG-301), Carline Code (TG-302), and Model Year (TG-6) must specify a carline that exists in the system. | The provided Carline Manufacturer Code (TG-300), Division Code (TG-301), Carline Code (TG-302), and Model Year (TG-6) must specify a carline that exists in the system. | (TG-302) (TG-300) (TG-301) (TG-6) | Active | Not Under Development |
| VERIFY-3243 | Certification | Test Group | LD-CERT-TG-BR090 | The provided Evaporative/Refueling Family (TG-3) and Model Year (TG-6) must exist in the system for this Manufacturer Code (TG-1). | The provided Evaporative/Refueling Family (TG-3) and Model Year (TG-6) must exist in the system for this Manufacturer Code (TG-1). | (TG-1) (TG-3) (TG-6) | Active | Not Under Development |
| VERIFY-3244 | Certification | Test Group | LD-CERT-TG-BR091 | If the Manufacturer Code of the owner for the provided Exhaust Test Number (TG-202.5) is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the Exhaust Test Number. | If the Manufacturer Code of the owner for the provided Exhaust Test Number (TG-202.5) is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the Exhaust Test Number. | (TG-202.5) | Active | Not Under Development |
| VERIFY-3245 | Certification | Test Group | LD-CERT-TG-BR092 | If the Manufacturer Code of the owner for the provided Evaporative Test Number (TG-202) is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the Evaporative Test Number. | If the Manufacturer Code of the owner for the provided Evaporative Test Number (TG-202) is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the Evaporative Test Number. | (TG-202) | Active | Not Under Development |
| VERIFY-3248 | Certification | Test Group | LD-CERT-TG-BR095a | If there is an evaporative family (TG-3) specified, there must be at least one evaporative/refueling standard that has an Emission Name (TG-225) of 'HC-TOTAL' and a Cert Region Code (TG-221) of 'FA' (Federal) if there are federal sales for this test group (Cert Region Code (TG-14) of 'FA' (Federal)), or a Cert Region Code (TG-221) of 'CA' if there are only California Sales for this test group. | If there is an evaporative family (TG-3) specified, there must be at least one evaporative/refueling standard that has an Emission Name (TG-225) of 'HC-TOTAL' and a Cert Region Code (TG-221) of 'FA' (Federal) if there are federal sales for this test group (Cert Region Code (TG-14) of 'FA' (Federal)), or a Cert Region Code (TG-221) of 'CA' if there are only California Sales for this test group. | (TG-225) (TG-225) (TG-221) | Active | Not Under Development |
| VERIFY-3249 | Certification | Test Group | LD-CERT-TG-BR095b | If there is an evaporative family (TG-3) specified, there must be at least one evaporative/refueling standard that has an Emission Name (TG-225) of 'HC-TOTAL' and a Cert Region Code (TG-221) of 'FA' (Federal) if there are federal sales for this test group (Cert Region Code (TG-14) of 'FA' (Federal)), or a Cert Region Code (TG-221) of 'CA' if there are only California Sales for this test group. | If there is an evaporative family (TG-3) specified, there must be at least one evaporative/refueling standard that has an Emission Name (TG-225) of 'HC-TOTAL' and a Cert Region Code (TG-221) of 'FA' (Federal) if there are federal sales for this test group (Cert Region Code (TG-14) of 'FA' (Federal)), or a Cert Region Code (TG-221) of 'CA' if there are only California Sales for this test group. | (TG-225) (TG-225) (TG-221) | Active | Not Under Development |
| VERIFY-3251 | Certification | Test Group | LD-CERT-TG-BR096 | If Transmission Type (TG-307) is equal to 'CVT' (Continuously Variable), then Number of Transmission Gears (TG-311) must equal '1'. | If Transmission Type (TG-307) is equal to 'CVT' (Continuously Variable), then Number of Transmission Gears (TG-311) must equal '1'. | (TG-311) | Active | Not Under Development |
| VERIFY-3252 | Certification | Test Group | LD-CERT-TG-BR097 | If the Exhaust Standard Test Procedure (TG-204.5) is an ORVR (24 or 44) or Running Loss (32 or 37) test, then a Test Result/Emission Name (TG-209) of 'HC-TOTAL' is not allowed. | If the Exhaust Standard Test Procedure (TG-204.5) is an ORVR (24 or 44) or Running Loss (32 or 37) test, then a Test Result/Emission Name (TG-209) of 'HC-TOTAL' is not allowed. | (TG-209) | Active | Not Under Development |
| VERIFY-3253 | Certification | Test Group | LD-CERT-TG-BR098 | If the Evaporative Standard Test Procedure (TG-223.5) is an ORVR (24 or 44) or Running Loss (32 or 37) test, then a Test Result/Emission Name (TG-225) of 'HC-TOTAL' is not allowed. | If the Evaporative Standard Test Procedure (TG-223.5) is an ORVR (24 or 44) or Running Loss (32 or 37) test, then a Test Result/Emission Name (TG-225) of 'HC-TOTAL' is not allowed. | (TG-225) | Active | Not Under Development |
| VERIFY-3254 | Certification | Test Group | LD-CERT-TG-BR099 | An Exhaust Standard Test Result/Emission Name (TG-209) of 'HC' is only allowed for ORVR (Test Procedure (TG-204.5) equal to 24 or 44) or Running Loss (Test Procedure (TG-204.5) equal to 32 or 37) tests. | An Exhaust Standard Test Result/Emission Name (TG-209) of 'HC' is only allowed for ORVR (Test Procedure (TG-204.5) equal to 24 or 44) or Running Loss (Test Procedure (TG-204.5) equal to 32 or 37) tests. | (TG-209) | Active | Not Under Development |
| VERIFY-3255 | Certification | Test Group | LD-CERT-TG-BR100 | An Evaporative Standard Test Result/Emission Name (TG-225) of 'HC' is only allowed for ORVR (Test Procedure (TG-223.5) equal to 24 or 44) or Running Loss (Test Procedure (TG-223.5) equal to 32 or 37) tests. | An Evaporative Standard Test Result/Emission Name (TG-225) of 'HC' is only allowed for ORVR (Test Procedure (TG-223.5) equal to 24 or 44) or Running Loss (Test Procedure (TG-223.5) equal to 32 or 37) tests. | (TG-225) | Active | Not Under Development |
| VERIFY-3256 | Certification | Test Group | LD-CERT-TG-BR101 | If the Process Code (TG-0.5) is 'C' (Correction) then there cannot be any locked and active Certificate Summary Information Reports (CSIs) which reference this Test Group Name (TG-2). | If the Process Code (TG-0.5) is 'C' (Correction) then there cannot be any locked and active Certificate Summary Information Reports (CSIs) which reference this Test Group Name (TG-2). | (TG-2) | Active | Not Under Development |
| VERIFY-3257 | Certification | Test Group | LD-CERT-TG-BR102 | If the Certification Region Code (TG-200) is 'FA' (Federal) and the Exhaust Emission Standard Level (TG-201) is not equal to 'OT' (Other), then the Exhaust Emission Standard Level (TG-201) should be a Federal Standard (B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, B11, HDV1, HDV2, T1). | If the Certification Region Code (TG-200) is 'FA' (Federal) and the Exhaust Emission Standard Level (TG-201) is not equal to 'OT' (Other), then the Exhaust Emission Standard Level (TG-201) should be a Federal Standard (B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, B11, HDV1, HDV2, T1, If the Certification Region Code (TG-200) is 'FA' (Federal) and the Exhaust Emission Standard Level (TG-201) is not equal to 'OT' (Other), then the Exhaust Emission Standard Level (TG-201) should be a Federal Standard (B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, B11, HDV1, HDV2, T1, T3B160, T3B125, T3B110, T3B85, T3SULEV30, T3B70, T3B50, T3B30, T3B20, T3B0, HDV2B395, HDV2B340, HDV2B250, HDV2B170, HDV2B150, HDV2B0, HDV3B630, HDV3B570, HDV3B400, HDV3B270, HDV3B230, HDV3B200, HDV3B0). | (TG-201) | Active | Not Under Development |
| VERIFY-3258 | Certification | Test Group | LD-CERT-TG-BR103 | If the Process Code (TG-0.5) is 'N' then CSI Type (TG-4) cannot equal 'R' (Update for running change) or 'U' (Update for correction) | If the Process Code (TG-0.5) is 'N' then CSI Type (TG-4) cannot equal 'R' (Update for running change) or 'U' (Update for correction) | (TG-4) | Active | Not Under Development |
| VERIFY-3259 | Certification | Test Group | LD-CERT-TG-BR104 | Each Evaporative Family Name (TG-3) entered must be a unique value. | Each Evaporative Family Name (TG-3) entered must be a unique value. | (TG-3) | Active | Not Under Development |
| VERIFY-3354 | Certification | Test Group | LD-CERT-TG-BR105 | If Drive Source (TG-7.1) is 'C' (Combustion Engine) and 'E' (Electric Motor), then Hybrid Indicator (TG-7.2) should be 'Y' (Yes). Otherwise, Hybrid Indicator (TG-7.2) should be 'N' (No). | If Drive Source (TG-7.1) is 'C' (Combustion Engine) and 'E' (Electric Motor), then Hybrid Indicator (TG-7.2) should be 'Y' (Yes). Otherwise, Hybrid Indicator (TG-7.2) should be 'N' (No). | (TG-7.2) | Active | Not Under Development |
| VERIFY-3355 | Certification | Test Group | LD-CERT-TG-BR106 | If Drive Source (TG-7.1) equals "C" (Combustion Engine), then Fuel(s) (TG-7.3) can not equal "EL" (Electricity). | If Drive Source (TG-7.1) equals "C" (Combustion Engine), then Fuel(s) (TG-7.3) can not equal "EL" (Electricity). | (TG-7.3) | Active | Not Under Development |
| VERIFY-3356 | Certification | Test Group | LD-CERT-TG-BR107 | If Drive Source (TG-7.1) equals "E" (Electric Motor), Fuel(s) (TG-7.3) must equal "EL" (Electricity), "H" (Hydrogen), or "M" (Methanol). | If Drive Source (TG-7.1) equals "E" (Electric Motor), Fuel(s) (TG-7.3) must equal "EL" (Electricity), "H" (Hydrogen), or "M" (Methanol). | (TG-7.3) | Active | Not Under Development |
| VERIFY-3357 | Certification | Test Group | LD-CERT-TG-BR108 | if Drive Source (TG-7.1) equals "C" (Combustion Engine), then Basic Fuel Metering System (TG-7.4) is required. Otherwise it is not allowed. | if Drive Source (TG-7.1) equals "C" (Combustion Engine), then Basic Fuel Metering System (TG-7.4) is required. Otherwise it is not allowed. | (TG-7.4) | Active | Not Under Development |
| VERIFY-3358 | Certification | Test Group | LD-CERT-TG-BR109 | If Basic Fuel Metering System (TG-7.4) equals "CMIX" (CNG Mixer Unit), "LMIX" (LPG Mixer), "CRDI" (Common Rail Direct Diesel Injection), "GFI" (Gaseous Fuel Injection), "DDI" (Direct Diesel Injection) or "IDI" (Indirect Diesel Injection), then Lean Burn Strategy Indicator (TG-7.4.1) is not allowed. Otherwise it is required. | If Basic Fuel Metering System (TG-7.4) equals "CMIX" (CNG Mixer Unit), "LMIX" (LPG Mixer), "CRDI" (Common Rail Direct Diesel Injection), "GFI" (Gaseous Fuel Injection), "DDI" (Direct Diesel Injection) or "IDI" (Indirect Diesel Injection), then Lean Burn Strategy Indicator (TG-7.4.1) is not allowed. Otherwise it is required. | (TG-7.4.1) | Active | Not Under Development |
| VERIFY-3361 | Certification | Test Group | LD-CERT-TG-BR112 | All values for CREE Weighting Factor for Dual/Multiple Fuel Vehicles (TG-7.5) must sum to 1. | All values for CREE Weighting Factor for Dual/Multiple Fuel Vehicles (TG-7.5) must sum to 1. | (TG-7.5) | Active | Not Under Development |
| VERIFY-3362 | Certification | Test Group | LD-CERT-TG-BR113a | If Drive Source (TG-7.1) equals 'C' (Combustion Engine) and more than one fuel is selected for Fuel(s) (TG-7.3), then Multiple Fuel Storage - Separate Or Together (TG-7.6) is required, otherwise it is not allowed. | If Drive Source (TG-7.1) equals 'C' (Combustion Engine) and more than one fuel is selected for Fuel(s) (TG-7.3), then Multiple Fuel Storage - Separate Or Together (TG-7.6) is required, otherwise it is not allowed. | (TG-7.6) | Active | Not Under Development |
| VERIFY-9389 | Certification | Test Group | LD-CERT-TG-BR113b | If Drive Source (TG-7.1) equals 'C' (Combustion Engine) and more than one fuel is selected for Fuel(s) (TG-7.3), then Multiple Fuel Storage - Separate Or Together (TG-7.6) is required, otherwise it is not allowed. | If Drive Source (TG-7.1) equals 'C' (Combustion Engine) and more than one fuel is selected for Fuel(s) (TG-7.3), then Multiple Fuel Storage - Separate Or Together (TG-7.6) is required, otherwise it is not allowed. | (TG-7.6) | Active | Not Under Development |
| VERIFY-3363 | Certification | Test Group | LD-CERT-TG-BR114 | If Drive Source (TG-7.1) equals 'C' (Combustion Engine) and if more than one Fuel(s) (TG-7.3) selected is combustible (i.e., "Gasoline" (G), "Diesel" (D), "Methanol" (M), "Ethanol" (E), "Compressed Natural Gas" (CNG), "Liquified Natural Gas" (LNG), or "Liquified Petroleum Gas" (LPG)), then Multiple Fuel Combustion - Separate or Together (TG-7.7) is required. Otherwise, it is optional. | If Drive Source (TG-7.1) equals 'C' (Combustion Engine) and if more than one Fuel(s) (TG-7.3) selected is combustible (i.e., "Gasoline" (G), "Diesel" (D), "Methanol" (M), "Ethanol" (E), "Compressed Natural Gas" (CNG), "Liquified Natural Gas" (LNG), or "Liquified Petroleum Gas" (LPG)), then Multiple Fuel Combustion - Separate or Together (TG-7.7) is required. Otherwise, it is optional. | (TG-7.7) | Active | Not Under Development |
| VERIFY-3364 | Certification | Test Group | LD-CERT-TG-BR115 | If Drive Source (TG-7.1) equals 'E' (Electric Motor), then Fuel Cell Indicator (TG-7.8) is required. Otherwise, it is optional. | If Drive Source (TG-7.1) equals 'E' (Electric Motor), then Fuel Cell Indicator (TG-7.8) is required. Otherwise, it is optional. | (TG-7.8) | Active | Not Under Development |
| VERIFY-3365 | Certification | Test Group | LD-CERT-TG-BR116 | If Drive Source (TG-7.1) equals 'E' (Electric Motor), then Rechargeable Energy Storage System Indicator (TG-7.9) is required. Otherwise, it is optional. | If Drive Source (TG-7.1) equals 'E' (Electric Motor), then Rechargeable Energy Storage System Indicator (TG-7.9) is required. Otherwise, it is optional. | (TG-7.9) | Active | Not Under Development |
| VERIFY-3366 | Certification | Test Group | LD-CERT-TG-BR117 | If Drive Source (TG-7.1) equals 'E' (Electric Motor), then Off-board Charge Capable Indicator (TG-8.3) is required. Otherwise, it is optional. | If Drive Source (TG-7.1) equals 'E' (Electric Motor), then Off-board Charge Capable Indicator (TG-8.3) is required. Otherwise, it is optional. | (TG-8.3) | Active | Not Under Development |
| VERIFY-3367 | Certification | Test Group | LD-CERT-TG-BR118 | If Drive Source (TG-7.1) equals 'E' (Electric Motor) then Rechargeable Energy Storage System (TG-77) is required, otherwise it is not allowed. | If Drive Source (TG-7.1) equals 'E' (Electric Motor) then Rechargeable Energy Storage System (TG-77) is required, otherwise it is not allowed. | (TG-77) | Active | Not Under Development |
| VERIFY-3369 | Certification | Test Group | LD-CERT-TG-BR120 | If Hybrid Indicator (TG-7.2) equals 'Y' (Yes), then Hybrid Type (TG-26) is required. Otherwise, not allowed. | If Hybrid Indicator (TG-7.2) equals 'Y' (Yes), then Hybrid Type (TG-26) is required. Otherwise, not allowed. | (TG-26) | Active | Not Under Development |
| VERIFY-3371 | Certification | Test Group | LD-CERT-TG-BR122 | If Drive Source (TG-7.1) equals 'C' (Combustion Engine), then Engine Type (TG-28) is required. | If Drive Source (TG-7.1) equals 'C' (Combustion Engine), then Engine Type (TG-28) is required. | (TG-28) | Active | Not Under Development |
| VERIFY-3374 | Certification | Test Group | LD-CERT-TG-BR125 | If Engine Type (TG-28) equals '4SI' (4-Stroke Spark Ignition), '2SI' (2-stroke Spark Ignition), '4SCI' (4-stroke Compression Ignition), '2SCI' (2-stroke Compression Ignition), or 'RT' (Rotary), then Engine Block Arrangement (TG-30) is required. | If Engine Type (TG-28) equals '4SI' (4-Stroke Spark Ignition), '2SI' (2-stroke Spark Ignition), '4SCI' (4-stroke Compression Ignition), '2SCI' (2-stroke Compression Ignition), or 'RT' (Rotary), then Engine Block Arrangement (TG-30) is required. | (TG-30) | Active | Not Under Development |
| VERIFY-3376 | Certification | Test Group | LD-CERT-TG-BR127 | If Engine Type (TG-28) equals '4SI' (4-Stroke Spark Ignition), '2SI' (2-stroke Spark Ignition), '4SCI' (4-stroke Compression Ignition), '2SCI' (2-stroke Compression Ignition), or 'RT' (Rotary), then Number of Cylinders/Rotors (TG-32) is required. | If Engine Type (TG-28) equals '4SI' (4-Stroke Spark Ignition), '2SI' (2-stroke Spark Ignition), '4SCI' (4-stroke Compression Ignition), '2SCI' (2-stroke Compression Ignition), or 'RT' (Rotary), then Number of Cylinders/Rotors (TG-32) is required. | (TG-32) | Active | Not Under Development |
| VERIFY-3377 | Certification | Test Group | LD-CERT-TG-BR128 | If Drive Source (TG-7.1) equals 'C' (Combustion Engine), then Total Number Of After Treatment Devices(ATDs)(TG-53) is required. Otherwise, it is not allowed. | If Drive Source (TG-7.1) equals 'C' (Combustion Engine), then Total Number Of After Treatment Devices(ATDs)(TG-53) is required. Otherwise, it is not allowed. | (TG-53) | Active | Not Under Development |
| VERIFY-3380 | Certification | Test Group | LD-CERT-TG-BR131 | If Rechargeable Energy Storage System (TG-77) equals 'B' (Battery(s)), Battery Type (TG-79) is required. Otherwise not allowed. | If Rechargeable Energy Storage System (TG-77) equals 'B' (Battery(s)), Battery Type (TG-79) is required. Otherwise not allowed. | (TG-79) | Active | Not Under Development |
| VERIFY-3381 | Certification | Test Group | LD-CERT-TG-BR132 | If Rechargeable Energy Storage System (TG-77) equals 'B' (Battery(s)) and Battery Type (TG-79) equals "Other", then Battery Type, if "Other" (TG-80) is required. Otherwise, it is not allowed. | If Rechargeable Energy Storage System (TG-77) equals 'B' (Battery(s)) and Battery Type (TG-79) equals "Other", then Battery Type, if "Other" (TG-80) is required. Otherwise, it is not allowed. | (TG-80) | Active | Not Under Development |
| VERIFY-3382 | Certification | Test Group | LD-CERT-TG-BR133 | If Rechargeable Energy Storage System (TG-77) equals 'B' (Battery(s)), then Number Of Battery Packs (not cells)(TG-81) is required. | If Rechargeable Energy Storage System (TG-77) equals 'B' (Battery(s)), then Number Of Battery Packs (not cells)(TG-81) is required. | (TG-81) | Active | Not Under Development |
| VERIFY-3383 | Certification | Test Group | LD-CERT-TG-BR134 | If Rechargeable Energy Storage System (TG-77) equals 'B' (Battery(s)), then Total Voltage Of Battery Pack(s)(TG-82) is required. | If Rechargeable Energy Storage System (TG-77) equals 'B' (Battery(s)), then Total Voltage Of Battery Pack(s)(TG-82) is required. | (TG-82) | Active | Not Under Development |
| VERIFY-3384 | Certification | Test Group | LD-CERT-TG-BR135 | If Rechargeable Energy Storage System (TG-77) equals 'B' (Battery(s)), then Battery Energy Capacity (TG-83) is required. | If Rechargeable Energy Storage System (TG-77) equals 'B' (Battery(s)), then Battery Energy Capacity (TG-83) is required. | (TG-83) | Active | Not Under Development |
| VERIFY-3385 | Certification | Test Group | LD-CERT-TG-BR136 | If Rechargeable Energy Storage System (TG-77) equals 'B' (Battery(s)), then Battery Specific Energy (TG-84) is required. | If Rechargeable Energy Storage System (TG-77) equals 'B' (Battery(s)), then Battery Specific Energy (TG-84) is required. | (TG-84) | Active | Not Under Development |
| VERIFY-3386 | Certification | Test Group | LD-CERT-TG-BR137 | If Rechargeable Energy Storage System (TG-77) equals 'B' (Battery(s)), then Battery Charger Type (TG-85) is required. | If Rechargeable Energy Storage System (TG-77) equals 'B' (Battery(s)), then Battery Charger Type (TG-85) is required. | (TG-85) | Active | Not Under Development |
| VERIFY-3387 | Certification | Test Group | LD-CERT-TG-BR138 | If Rechargeable Energy Storage System (TG-77) equals 'C' (Capacitor), then Number Of Capacitors (TG-86) is required. | If Rechargeable Energy Storage System (TG-77) equals 'C' (Capacitor), then Number Of Capacitors (TG-86) is required. | (TG-86) | Active | Not Under Development |
| VERIFY-3388 | Certification | Test Group | LD-CERT-TG-BR139 | If Rechargeable Energy Storage System (TG-77) equals 'C' (Capacitor), then Capacitor Rating In Farads (TG-87) is required. | If Rechargeable Energy Storage System (TG-77) equals 'C' (Capacitor), then Capacitor Rating In Farads (TG-87) is required. | (TG-87) | Active | Not Under Development |
| VERIFY-3389 | Certification | Test Group | LD-CERT-TG-BR140a | If Fuel Cell Indicator (TG-7.8) equals 'Y' (Yes), then Fuel Cell Description (TG-98) is required; otherwise, it is not allowed. | If Fuel Cell Indicator (TG-7.8) equals 'Y' (Yes), then Fuel Cell Description (TG-98) is required; otherwise, it is not allowed. | (TG-98) | Active | Not Under Development |
| VERIFY-9391 | Certification | Test Group | LD-CERT-TG-BR140b | If Fuel Cell Indicator (TG-7.8) equals 'Y' (Yes), then Fuel Cell Description (TG-98) is required; otherwise, it is not allowed. | If Fuel Cell Indicator (TG-7.8) equals 'Y' (Yes), then Fuel Cell Description (TG-98) is required; otherwise, it is not allowed. | (TG-98) | Active | Not Under Development |
| VERIFY-3390 | Certification | Test Group | LD-CERT-TG-BR141a | If Fuel Cell Indicator (TG-7.8) equals 'Y' (Yes) and Fuel(s)(TG.7.3) equals 'H' (Hydrogen), then Fuel Cell On-Board H2 Storage Capacity (TG-99) is required, otherwise it is not allowed. | If Fuel Cell Indicator (TG-7.8) equals 'Y' (Yes) and Fuel(s)(TG.7.3) equals 'H' (Hydrogen), then Fuel Cell On-Board H2 Storage Capacity (TG-99) is required, otherwise it is not allowed. | (TG-99) | Active | Not Under Development |
| VERIFY-9392 | Certification | Test Group | LD-CERT-TG-BR141b | If Fuel Cell Indicator (TG-7.8) equals 'Y' (Yes) and Fuel(s)(TG.7.3) equals 'H' (Hydrogen), then Fuel Cell On-Board H2 Storage Capacity (TG-99) is required, otherwise it is not allowed. | If Fuel Cell Indicator (TG-7.8) equals 'Y' (Yes) and Fuel(s)(TG.7.3) equals 'H' (Hydrogen), then Fuel Cell On-Board H2 Storage Capacity (TG-99) is required, otherwise it is not allowed. | (TG-99) | Active | Not Under Development |
| VERIFY-3392 | Certification | Test Group | LD-CERT-TG-BR143 | Official FTP Test Number (TG-217) must exist in Verify. | Official FTP Test Number (TG-217) must exist in Verify. | (TG-217) | Active | Not Under Development |
| VERIFY-3393 | Certification | Test Group | LD-CERT-TG-BR144 | The Test 5-Cycle Category (TI-45) of the test entered in Official FTP Test Number (TG-217) must equal 'FTP75'. | The Test 5-Cycle Category (TI-45) of the test entered in Official FTP Test Number (TG-217) must equal 'FTP75' (Test Procedures (TI-8) = 2, 21, 25, 31, 35, 41, and 45). | (TG-217) | Active | Under Development (To Be Updated) |
| VERIFY-3394 | Certification | Test Group | LD-CERT-TG-BR145 | If Hybrid Indicator (TG-7.2) equals 'Y' (Yes), then Official FTP Test Number (TG-217) cannot be a 3-bag emission test (Associated Test Result/Emission Name (TI-19) of 'FE Bag 3' present and 'FE Bag 4' not present). | If Hybrid Indicator (TG-7.2) equals 'Y' (Yes), then Official FTP Test Number (TG-217) cannot be a 3-bag emission test (Associated Test Result/Emission Name (TI-19) of 'FE Bag 3' present and 'FE Bag 4' not present). | (TG-217) | Active | Under Development (To Be Updated) |
| VERIFY-3395 | Certification | Test Group | LD-CERT-TG-BR146 | Official SC03 Test Number (TG-219) must exist in Verify. | Official SC03 Test Number (TG-219) must exist in Verify. | (TG-219) | Active | Not Under Development |
| VERIFY-3396 | Certification | Test Group | LD-CERT-TG-BR147 | The Test 5-Cycle Category (TI-45) of the test entered in Official SC03 Test Number (TG-219) must equal 'SC03'. |
The Test 5-Cycle Category (TI-45) of the test entered in Official SC03 Test Number (TG-219) must equal 'SC03'. |
(TG-219) | Active | Under Development (To Be Deleted) |
| VERIFY-3397 | Certification | Test Group | LD-CERT-TG-BR148 | Official Cold CO Test Number must exist in Verify. | Official Cold CO Test Number must exist in Verify. | (TG-219.1) | Active | Not Under Development |
| VERIFY-3398 | Certification | Test Group | LD-CERT-TG-BR149 | The Test 5-Cycle Category (TI-45) of the test entered in Official Cold CO Test Number (TG-219.1) must equal 'FTP20'. | The Test 5-Cycle Category (TI-45) of the test entered in Official Cold CO Test Number (TG-219.1) must equal 'FTP20'. | (TG-219.1) | Active | Not Under Development |
| VERIFY-3399 | Certification | Test Group | LD-CERT-TG-BR150 | Official Highway Test Number (TG-219.2) must exist in Verify. | Official Highway Test Number (TG-219.2) must exist in Verify. | (TG-219.2) | Active | Not Under Development |
| VERIFY-3400 | Certification | Test Group | LD-CERT-TG-BR151 | The Test 5-Cycle Category (TI-45) of the test entered in Official Highway Test Number (TG-219.2) must equal 'HWY'. | The Test 5-Cycle Category (TI-45) of the test entered in Official Highway Test Number (TG-219.2) must equal 'HWY'. | (TG-219.2) | Active | Not Under Development |
| VERIFY-3401 | Certification | Test Group | LD-CERT-TG-BR152 | EPA City Litmus Value (TG-219.3.1) : If Official FTP Test Number (TG-217) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", "FE BAG 2", and "FE BAG 3" and Official Highway Test Number (TG-219.2) has Test Result/Emission Name (TI-19) equal to "MFR FE" and Official US06 Test Number (TG-218) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", and "FE BAG 2" and Official Cold CO Test Number (TG-219.1) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", "FE BAG 2", and "FE BAG 3" and Official SC03 Test Number (TG-219) has Test Result/Emission Name (TI-19) equal to "MFR FE" then EPA City Litmus Threshold (TG-219.3.2) is required; otherwise, it is not allowed. | EPA City Litmus Value (TG-219.3.1) : If Official FTP Test Number (TG-217) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", "FE BAG 2", and "FE BAG 3" and Official Highway Test Number (TG-219.2) has Test Result/Emission Name (TI-19) equal to "MFR FE" and Official US06 Test Number (TG-218) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", and "FE BAG 2" and Official Cold CO Test Number (TG-219.1) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", "FE BAG 2", and "FE BAG 3" and Official SC03 Test Number (TG-219) has Test Result/Emission Name (TI-19) equal to "MFR FE" then EPA City Litmus Threshold (TG-219.3.2) is required; otherwise, it is not allowed. | (TG-219.3.2) | Active | Not Under Development |
| VERIFY-3402 | Certification | Test Group | LD-CERT-TG-BR153 | EPA City Litmus Threshold (TG-219.3.2) : If Official FTP Test Number (TG-217) has associated Test Result/Emission Name (TI-19) equal to "MFR FE", then EPA City Litmus Threshold (TG-219.3.2) is required; otherwise, it is not allowed. | EPA City Litmus Threshold (TG-219.3.2) : If Official FTP Test Number (TG-217) has associated Test Result/Emission Name (TI-19) equal to "MFR FE", then EPA City Litmus Threshold (TG-219.3.2) is required; otherwise, it is not allowed. | (TG-219.3.2) | Active | Not Under Development |
| VERIFY-3403 | Certification | Test Group | LD-CERT-TG-BR154 | EPA Highway Litmus Value (TG-219.4.1) : If Official FTP Test Number (TG-217) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", "FE BAG 2", and "FE BAG 3" and Official Highway Test Number (TG-219.2) has Test Result/Emission Name (TI-19) equal to "MFR FE" and Official US06 Test Number (TG-218) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", and "FE BAG 2" and Official Cold CO Test Number (TG-219.1) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", "FE BAG 2", and "FE BAG 3" and Official SC03 Test Number (TG-219) has Test Result/Emission Name (TI-19) equal to "MFR FE" then EPA City Litmus Threshold (TG-219.3.2) is required; otherwise, it is not allowed. | EPA Highway Litmus Value (TG-219.4.1) : If Official FTP Test Number (TG-217) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", "FE BAG 2", and "FE BAG 3" and Official Highway Test Number (TG-219.2) has Test Result/Emission Name (TI-19) equal to "MFR FE" and Official US06 Test Number (TG-218) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", and "FE BAG 2" and Official Cold CO Test Number (TG-219.1) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", "FE BAG 2", and "FE BAG 3" and Official SC03 Test Number (TG-219) has Test Result/Emission Name (TI-19) equal to "MFR FE" then EPA City Litmus Threshold (TG-219.3.2) is required; otherwise, it is not allowed. | (TG-219.3.2) | Active | Not Under Development |
| VERIFY-3404 | Certification | Test Group | LD-CERT-TG-BR155 | EPA Highway Litmus Threshold (TG-219.4.2) : If Official Highway Test Number (TG-219.2) has associated Test Result/Emission Name (TI-19) equal to "MFR FE", then EPA Highway Litmus Threshold (TG-219.4.2) is required; otherwise, it is not allowed. | EPA Highway Litmus Threshold (TG-219.4.2) : If Official Highway Test Number (TG-219.2) has associated Test Result/Emission Name (TI-19) equal to "MFR FE", then EPA Highway Litmus Threshold (TG-219.4.2) is required; otherwise, it is not allowed. | (TG-219.4.2) | Active | Not Under Development |
| VERIFY-4104 | Certification | Test Group | LD-CERT-TG-BR156 | Official US06 Test Number (TG-218) must exist in Verify. | Official US06 Test Number (TG-218) must exist in Verify. | (TG-218) | Active | Not Under Development |
| VERIFY-4105 | Certification | Test Group | LD-CERT-TG-BR157 | The Test 5-Cycle Category (TI-45) of the test entered in Official US06 Test Number (TG-218) must equal 'US06'. |
The Test 5-Cycle Category (TI-45) of the test entered in Official US06 Test Number (TG-218) must equal 'US06'. |
(TG-218) | Active | Under Development (To Be Deleted) |
| VERIFY-5649 | Certification | Test Group | LD-CERT-TG-BR158 | Each Fuel(s) (TG-7.3) selected for Drive Source, must also be selected exactly once for Fuel(s) (TG-217.1) for Greenhouse Gas Official Test Numbers. (Fuel <value> was selected for Drive Source but not for Greenhouse Gas Official Test Numbers.) | Each Fuel(s) (TG-7.3) selected for Drive Source, must also be selected exactly once for Fuel(s) (TG-217.1) for Greenhouse Gas Official Test Numbers. (Fuel <value> was selected for Drive Source but not for Greenhouse Gas Official Test Numbers.) | (TG-7.3) (TG-217.1) | Active | Not Under Development |
| VERIFY-5650 | Certification | Test Group | LD-CERT-TG-BR160 | Each Test Group Fuel(s) (TG-217.1) selected for Official Test Numbers, must also be selected at least once for Fuel(s) (TG-7.3) for Drive Source. (Fuel <value> was selected for Official Test Numbers but not for Drive Source.) | Each Test Group Fuel(s) (TG-217.1) selected for Official Test Numbers, must also be selected at least once for Fuel(s) (TG-7.3) for Drive Source. (Fuel <value> was selected for Official Test Numbers but not for Drive Source.) | (TG-7.3) (TG-217.1) | Active | Not Under Development |
| VERIFY-5675 | Certification | Test Group | LD-CERT-TG-BR161 | The following values for Test Result/Emission Name (TG-225) are not allowed within the Evaporative Emission Standards section: 'AMP-HRS' (Integrated Amp-hours), 'START-SOC' (System Start State of Charge Watt-hours), 'END-SOC' (System End State of Charge Watt-hours), 'ACT-DISTANCE' (Actual Distance Driven (miles)), 'AS-VOLT' (Average System Voltage), 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), and 'DT-EER' (Drive Trace Energy Economy Rating). | The following values for Test Result/Emission Name (TG-225) are not allowed within the Evaporative Emission Standards section: 'AMP-HRS' (Integrated Amp-hours), 'START-SOC' (System Start State of Charge Watt-hours), 'END-SOC' (System End State of Charge Watt-hours), 'ACT-DISTANCE' (Actual Distance Driven (miles)), 'AS-VOLT' (Average System Voltage), 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), and 'DT-EER' (Drive Trace Energy Economy Rating). | (TG-225) | Active | Not Under Development |
| VERIFY-6147 | Certification | Test Group | LD-CERT-TG-BR162 | If Drive Source (TG-7.1) only equals 'C' (Combustion Engine) and one of the selected values for Fuel(s) (TG-7.3) for that Drive Source equals 'Hyd' (Hydraulic), then Hybrid Indicator (TG-7.2) equals 'Yes'; otherwise, Hybrid Indicator (TG-7.2) should be 'N' (No). | If Drive Source (TG-7.1) only equals 'C' (Combustion Engine) and one of the selected values for Fuel(s) (TG-7.3) for that Drive Source equals 'Hyd' (Hydraulic), then Hybrid Indicator (TG-7.2) equals 'Yes'; otherwise, Hybrid Indicator (TG-7.2) should be 'N' (No). | (TG-7.2) | Active | Not Under Development |
| VERIFY-6158 | Certification | Test Group | LD-CERT-TG-BR163 | If Drive Source (TG-7.1) equals 'C' (Combustion Engine), then Camless Valvetrain Indicator (TG-32.5) is required. | If Drive Source (TG-7.1) equals 'C' (Combustion Engine), then Camless Valvetrain Indicator (TG-32.5) is required. | (TG-32.5) | Active | Not Under Development |
| VERIFY-6159 | Certification | Test Group | LD-CERT-TG-BR164 | If Drive Source (TG-7.1) equals 'C' (Combustion Engine), then Oil Viscosity/Classification (TG-32.6) is required. | If Drive Source (TG-7.1) equals 'C' (Combustion Engine), then Oil Viscosity/Classification (TG-32.6) is required. | (TG-32.6) | Active | Not Under Development |
| VERIFY-6166 | Certification | Test Group | LD-CERT-TG-BR165a | If Drive Source (TG-7.1) equals 'C' (Combustion Engine), then Engine Rated Horsepower (TG-37) is required; otherwise it is not allowed. | If Drive Source (TG-7.1) equals 'C' (Combustion Engine), then Engine Rated Horsepower (TG-37) is required; otherwise it is not allowed. | (TG-37) | Active | Not Under Development |
| VERIFY-9093 | Certification | Test Group | LD-CERT-TG-BR165b | If Drive Source (TG-7.1) equals 'C' (Combustion Engine), then Engine Rated Horsepower (TG-37) is required; otherwise it is not allowed. | If Drive Source (TG-7.1) equals 'C' (Combustion Engine), then Engine Rated Horsepower (TG-37) is required; otherwise it is not allowed. | (TG-37) | Active | Not Under Development |
| VERIFY-6169 | Certification | Test Group | LD-CERT-TG-BR166 | If Total Number of After Treatment Devices (ATDs) (TG-53) is not equal to '0', then ATD Number (TG-55) and ATD Type (TG-56) is required; otherwise, not allowed. | If Total Number of After Treatment Devices (ATDs) (TG-53) is not equal to '0', then ATD Number (TG-55) and ATD Type (TG-56) is required; otherwise, not allowed. | (TG-55) (TG-56) | Active | Not Under Development |
| VERIFY-6171 | Certification | Test Group | LD-CERT-TG-BR167 | If ATD Type (TG-56) is not ('DPF' (Diesel Particulate Filter) or 'SCR' (Selective Catalytic Reduction)), then ATD Precious Metal Type (TG-57) is required. | If ATD Type (TG-56) is not ('DPF' (Diesel Particulate Filter) or 'SCR' (Selective Catalytic Reduction)), then ATD Precious Metal Type (TG-57) is required. | (TG-57) | Active | Not Under Development |
| VERIFY-6172 | Certification | Test Group | LD-CERT-TG-BR168 | If ATD Precious Metal Type (TG-57) is not 'OT' (Other), then Substrate Material (TG-59) and Substrate Construction (TG-60) is required. | If ATD Precious Metal Type (TG-57) is not 'OT' (Other), then Substrate Material (TG-59) and Substrate Construction (TG-60) is required. | (TG-59) (TG-60) | Active | Not Under Development |
| VERIFY-6176 | Certification | Test Group | LD-CERT-TG-BR170a | If Drive Source (TG-7.1) is equal to 'C' (Combustion Engine), then Number of Air/Fuel Sensors (TG-61) is required. Otherwise, it is not allowed. | If Drive Source (TG-7.1) is equal to 'C' (Combustion Engine), then Number of Air/Fuel Sensors (TG-61) is required. Otherwise, it is not allowed. | (TG-61) | Active | Not Under Development |
| VERIFY-9094 | Certification | Test Group | LD-CERT-TG-BR170b | If Drive Source (TG-7.1) is equal to 'C' (Combustion Engine), then Number of Air/Fuel Sensors (TG-61) is required. Otherwise, it is not allowed. | If Drive Source (TG-7.1) is equal to 'C' (Combustion Engine), then Number of Air/Fuel Sensors (TG-61) is required. Otherwise, it is not allowed. | (TG-61) | Active | Not Under Development |
| VERIFY-6177 | Certification | Test Group | LD-CERT-TG-BR171 | If Number of Air/Fuel Sensors (TG-61) is not equal to '0' then Air/Fuel Sensor Type (TG-63) is required; otherwise, it is not allowed. | If Number of Air/Fuel Sensors (TG-61) is not equal to '0' then Air/Fuel Sensor Type (TG-63) is required; otherwise, it is not allowed. | (TG-63) | Active | Not Under Development |
| VERIFY-5739 | Certification | Test Group | LD-CERT-TG-BR172 | If Model Year (TG-6) is greater than or equal to '2012', then GHG Exempt Status (TG-216.7) is required. Otherwise, it is not allowed. |
If Model Year (TG-6) is greater than or equal to '2012', then GHG Exempt Status (TG-216.7) is required. Otherwise, it is not allowed. |
(TG-216.7) | Active | Not Under Development |
| VERIFY-6306 | Certification | Test Group | LD-CERT-TG-BR174a | If Drive Source (TG-7.1) is equal to 'C' (Combustion Engine), then Number of Knock Sensors (TG-65) should be required; otherwise, it is not allowed. | If Drive Source (TG-7.1) is equal to 'C' (Combustion Engine), then Number of Knock Sensors (TG-65) should be required; otherwise, it is not allowed. | (TG-65) | Active | Not Under Development |
| VERIFY-9095 | Certification | Test Group | LD-CERT-TG-BR174b | If Drive Source (TG-7.1) is equal to 'C' (Combustion Engine), then Number of Knock Sensors (TG-65) should be required; otherwise, it is not allowed. | If Drive Source (TG-7.1) is equal to 'C' (Combustion Engine), then Number of Knock Sensors (TG-65) should be required; otherwise, it is not allowed. | (TG-65) | Active | Not Under Development |
| VERIFY-6331 | Certification | Test Group | LD-CERT-TG-BR176 | The following values for Test Result/Emission Name (TG-209) are not allowed within the Exhaust Emission Standards section: 'AMP-HRS' (Integrated Amp-hours), 'START-SOC' (System Start State of Charge Watt-hours), 'END-SOC' (System End State of Charge Watt-hours), 'ACT-DISTANCE' (Actual Distance Driven (miles)), 'AS-VOLT' (Average System Voltage), 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), and 'DT-EER' (Drive Trace Energy Economy Rating). | The following values for Test Result/Emission Name (TG-209) are not allowed within the Exhaust Emission Standards section: 'AMP-HRS' (Integrated Amp-hours), 'START-SOC' (System Start State of Charge Watt-hours), 'END-SOC' (System End State of Charge Watt-hours), 'ACT-DISTANCE' (Actual Distance Driven (miles)), 'AS-VOLT' (Average System Voltage), 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), and 'DT-EER' (Drive Trace Energy Economy Rating). | (TG-209) | Active | Not Under Development |
| VERIFY-9400 | Certification | Test Group | LD-CERT-TG-BR177 | When requesting a CSI Report the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (TG-1) of the engine family for which the report was requested. | When requesting a CSI Report the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (TG-1) of the engine family for which the report was requested. | (TG-1) | Active | Not Under Development |
| VERIFY-6167 | Certification | Test Group | LD-CERT-TG-BR179 | If Air Aspiration Method (TG-47) is not equal to 'NA' (Naturally Aspirated), then Number of Air Aspiration Devices (TG-48) and Air Aspiration Device Configuration (TG-49) are required. | If Air Aspiration Method (TG-47) is not equal to 'NA' (Naturally Aspirated), then Number of Air Aspiration Devices (TG-48) and Air Aspiration Device Configuration (TG-49) are required. | (TG-48) (TG-49) | Active | Not Under Development |
| VERIFY-6351 | Certification | Test Group | LD-CERT-TG-BR180 | If Hybrid Type (TG-26) is equal to 'EH' (IC Engine/Hydraulic), then Hydraulic System Description (TG-89) is required. | If Hybrid Type (TG-26) is equal to 'EH' (IC Engine/Hydraulic), then Hydraulic System Description (TG-89) is required. | (TG-89) | Active | Not Under Development |
| VERIFY-9395 | Certification | Test Group | LD-CERT-TG-BR181 | LD-CERT-TG-BR181 - The Number Of After Treatment Devices (ATDs) (TG-53) and the number of ATD data sets submitted must be equal."; | LD-CERT-TG-BR181 - The Number Of After Treatment Devices (ATDs) (TG-53) and the number of ATD data sets submitted must be equal."; | (TG-53) | Active | Not Under Development |
| VERIFY-9398 | Certification | Test Group | LD-CERT-TG-BR182 | LD-CERT-TG-BR182 - The Number of Air/Fuel Sensors (TG-61) and the number of Air/Fuel Sensor Types submitted must be equal. | LD-CERT-TG-BR182 - The Number of Air/Fuel Sensors (TG-61) and the number of Air/Fuel Sensor Types submitted must be equal. | (TG-61) | Active | Not Under Development |
| VERIFY-9403 | Certification | Test Group | LD-CERT-TG-BR183 | If Official FTP Test Number (TG-217) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", "FE BAG 2", and "FE BAG 3" and Official Highway Test Number (TG-219.2) has Test Result/Emission Name (TI-19) equal to "MFR FE" and Official US06 Test Number (TG-218) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", and "FE BAG 2" and Official Cold CO Test Number (TG-219.1) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", "FE BAG 2", and "FE BAG 3" and Official SC03 Test Number (TG-219) has Test Result/Emission Name (TI-19) equal to "MFR FE" then EPA Highway Litmus Value (TG-219.4.1) is required, otherwise not allowed. |
If Official FTP Test Number (TG-217) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", "FE BAG 2", and "FE BAG 3" and Official Highway Test Number (TG-219.2) has Test Result/Emission Name (TI-19) equal to "MFR FE" and Official US06 Test Number (TG-218) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", and "FE BAG 2" and Official Cold CO Test Number (TG-219.1) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", "FE BAG 2", and "FE BAG 3" and Official SC03 Test Number (TG-219) has Test Result/Emission Name (TI-19) equal to "MFR FE" then EPA Highway Litmus Value (TG-219.4.1) is required, otherwise not allowed. |
(TG-219.4.1) | Active | Not Under Development |
| VERIFY-9404 | Certification | Test Group | LD-CERT-TG-BR184 | If Official FTP Test Number (TG-217) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", "FE BAG 2", and "FE BAG 3" and Official Highway Test Number (TG-219.2) has Test Result/Emission Name (TI-19) equal to "MFR FE" and Official US06 Test Number (TG-218) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", and "FE BAG 2" and Official Cold CO Test Number (TG-219.1) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", "FE BAG 2", and "FE BAG 3" and Official SC03 Test Number (TG-219) has Test Result/Emission Name (TI-19) equal to "MFR FE" then EPA Highway Litmus Value (TG-219.4.1) is required, otherwise not allowed. |
If Official FTP Test Number (TG-217) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", "FE BAG 2", and "FE BAG 3" and Official Highway Test Number (TG-219.2) has Test Result/Emission Name (TI-19) equal to "MFR FE" and Official US06 Test Number (TG-218) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", and "FE BAG 2" and Official Cold CO Test Number (TG-219.1) has Test Result/Emission Name (TI-19) equal to "FE BAG 1", "FE BAG 2", and "FE BAG 3" and Official SC03 Test Number (TG-219) has Test Result/Emission Name (TI-19) equal to "MFR FE" then EPA Highway Litmus Value (TG-219.4.1) is required, otherwise not allowed. |
(TG-219.3.1) | Active | Not Under Development |
| VERIFY-10220 | Certification | Test Group | LD-CERT-TG-BR185 | If the Official SC03 Test Number (TG-219) is not null (or blank) then Verify Calculated Rounded Adjusted Fuel Economy must be present for the test number entered. The test number specified for Official SC03 Test Number (TG-219) will need to be resubmitted to allow Verify to perform this calculation. | If the Official SC03 Test Number (TG-219) is not null (or blank) then Verify Calculated Rounded Adjusted Fuel Economy must be present for the test number entered. The test number specified for Official SC03 Test Number (TG-219) will need to be resubmitted to allow Verify to perform this calculation. | (TG-219) | Active | Not Under Development |
| VERIFY-9938 | Certification | Test Group | LD-CERT-TG-BR186 | If Official Charge Depleting Highway Test Number (TG-219.4) is entered, then its associated Test Procedure (TI-8) must be equal to '84' (Charge Depleting Highway). | If Official Charge Depleting Highway Test Number (TG-219.4) is entered, then its associated Test Procedure (TI-8) must be equal to '84' (Charge Depleting Highway). | (TG-219.4) (TI-8) | Active | Not Under Development |
| VERIFY-9937 | Certification | Test Group | LD-CERT-TG-BR187 | If Official Charge Depleting UDDS Test Number (TG-219.3) is entered, then its associated Test Procedure (TI-8) must be equal to '81' (Charge Depleting UDDS). | If Official Charge Depleting UDDS Test Number (TG-219.3) is entered, then its associated Test Procedure (TI-8) must be equal to '81' (Charge Depleting UDDS). | (TG-219.3) (TI-8) | Active | Not Under Development |
| VERIFY-10242 | Certification | Test Group | LD-CERT-TG-BR188 | If GHG Exempt Status (TG-216.7) equals 'NE' (Not Exempt) and HD GHG 2b/3 Indicator (TG-6.5) equals 'N' (No), then a Test Result/Emission Name (TG-209) in the 'Exhaust Emission Standards' section equal to either 'CREE' (Carbon-Related Exhaust Emissions) or 'OPT-CREE' (Optional Carbon-Related Exhaust Emissions) must exist and is required to include either an Additive DF (TG-214) or a Multiplicative DF (TG-215), otherwise it is not allowed. | If GHG Exempt Status (TG-216.7) equals 'NE' (Not Exempt) and HD GHG 2b/3 Indicator (TG-6.5) equals 'N' (No), then a Test Result/Emission Name (TG-209) in the 'Exhaust Emission Standards' section equal to either 'CREE' (Carbon-Related Exhaust Emissions) or 'OPT-CREE' (Optional Carbon-Related Exhaust Emissions) must exist and is required to include either an Additive DF (TG-214) or a Multiplicative DF (TG-215), otherwise it is not allowed. | (TG-209) (TG-214) (TG-215) | Active | Not Under Development |
| VERIFY-10301 | Certification | Test Group | LD-CERT-TG-BR189 | If the Model Year (TG-6) is greater than or equal to 2012 and if the Exhaust Test Number (TG-202.5) has a Test 5-Cycle Category (TI-45) of 'FTP75' or 'HWY', then that Exhaust Test Number (TG-202.5) must have a Rounded Adjusted CREE (TI-19.4) or Rounded Adjusted OPT-CREE (TI-19.8). The test number specified will need to be resubmitted to allow Verify to perform this calculation. |
If the Model Year (TG-6) is greater than or equal to 2012 and if the Exhaust Test Number (TG-202.5) has a Test 5-Cycle Category (TI-45) of 'FTP75' or 'HWY', then that Exhaust Test Number (TG-202.5) must have a Rounded Adjusted CREE (TI-19.4) or Rounded Adjusted OPT-CREE (TI-19.8). The test number specified will need to be resubmitted to allow Verify to perform this calculation. |
(TG-202.5) (TI-19.4) (TI-19.8) | Active | Not Under Development |
| VERIFY-10311 | Certification | Test Group | LD-CERT-TG-BR190 | If there exists any Official Test Number(s), then each of the Test Number(s) must be entered as an Exhaust Test Number (TG-202.5). | If there exists any Official Test Number(s), then each of the Test Number(s) must be entered as an Exhaust Test Number (TG-202.5). | (TG-217) (TG-217.1) (TG-218) (TG-219) (TG-219.1) (TG-219.2) | Active | Not Under Development |
| VERIFY-10576 | Certification | Test Group | LD-CERT-TG-BR191 | If there exists any Charge Depleting Official Test Number(s), then each of the Test Number(s) must be entered as an Exhaust Test Number (TG-202.5). | If there exists any Charge Depleting Official Test Number(s), then each of the Test Number(s) must be entered as an Exhaust Test Number (TG-202.5). | (TG-217.1) (TG-219.2) (TG-219.3) | Active | Not Under Development |
| VERIFY-10695 | Certification | Test Group | LD-CERT-TG-BR192 | The Analytically-Derived FE (ADFE) Indicator (TI-13.5) of the test entered in Official FTP Test Number (TG-217) must not equal 'Y'. | The Analytically-Derived FE (ADFE) Indicator (TI-13.5) of the test entered in Official FTP Test Number (TG-217) must not equal 'Y'. | (TG-217) | Active | Not Under Development |
| VERIFY-10696 | Certification | Test Group | LD-CERT-TG-BR193 | The Analytically-Derived FE (ADFE) Indicator (TI-13.5) of the test entered in Official US06 Test Number (TG-218) must not equal 'Y'. | The Analytically-Derived FE (ADFE) Indicator (TI-13.5) of the test entered in Official US06 Test Number (TG-218) must not equal 'Y'. | (TG-218) | Active | Not Under Development |
| VERIFY-10697 | Certification | Test Group | LD-CERT-TG-BR194 | The Analytically-Derived FE (ADFE) Indicator (TI-13.5) of the test entered in Official SC03 Test Number (TG-219) must not equal 'Y'. | The Analytically-Derived FE (ADFE) Indicator (TI-13.5) of the test entered in Official SC03 Test Number (TG-219) must not equal 'Y'. | (TG-219) | Active | Not Under Development |
| VERIFY-10698 | Certification | Test Group | LD-CERT-TG-BR195 | The Analytically-Derived FE (ADFE) Indicator (TI-13.5) of the test entered in Official Cold CO Test Number (TG-219.1) must not equal 'Y'. | The Analytically-Derived FE (ADFE) Indicator (TI-13.5) of the test entered in Official Cold CO Test Number (TG-219.1) must not equal 'Y'. | (TG-219.1) | Active | Not Under Development |
| VERIFY-10699 | Certification | Test Group | LD-CERT-TG-BR196 | The Analytically-Derived FE (ADFE) Indicator (TI-13.5) of the test entered in Official Highway Test Number (TG-219.2) must not equal 'Y'. | The Analytically-Derived FE (ADFE) Indicator (TI-13.5) of the test entered in Official Highway Test Number (TG-219.2) must not equal 'Y'. | (TG-219.2) | Active | Not Under Development |
| VERIFY-10779 | Certification | Test Group | LD-CERT-TG-BR197 | The Analytically-Derived FE (ADFE) Indicator (TI-13.5) of the test entered in Official Charge Depleting UDDS Test Number (TG-219.3) must not equal 'Y'. | The Analytically-Derived FE (ADFE) Indicator (TI-13.5) of the test entered in Official Charge Depleting UDDS Test Number (TG-219.3) must not equal 'Y'. | (TG-219.3) | Active | Not Under Development |
| VERIFY-10780 | Certification | Test Group | LD-CERT-TG-BR198 | The Analytically-Derived FE (ADFE) Indicator (TI-13.5) of the test entered in Official Charge Depleting Highway Test Number (TG-219.4) must not equal 'Y'. | The Analytically-Derived FE (ADFE) Indicator (TI-13.5) of the test entered in Official Charge Depleting Highway Test Number (TG-219.4) must not equal 'Y'. | (TG-219.4) | Active | Not Under Development |
| VERIFY-11408 | Certification | Test Group | LD-CERT-TG-BR199 | If Oil Viscosity/Classification (TG-32.6) contains "GF" then the minimum field length must be 6 characters. For example, an entry of "GF-4" would be rejected, however an entry of "GF-4 0W30" would not be rejected. |
If Oil Viscosity/Classification (TG-32.6) contains "GF" then the minimum field length must be 6 characters. For example, an entry of "GF-4" would be rejected, however an entry of "GF-4 0W30" would not be rejected. |
(TG-32.6) | Active | Not Under Development |
| VERIFY-10832 | Certification | Test Group | LD-CERT-TG-BR199 | If Oil Viscosity/Classification (TG-32.6) contains 'GF', then the minimum field length must be 6 characters. | If Oil Viscosity/Classification (TG-32.6) contains 'GF', then the minimum field length must be 6 characters. | (TG-32.6) | Active | Not Under Development |
| VERIFY-11409 | Certification | Test Group | LD-CERT-TG-BR200 | The minimum field length of Oil Viscosity/Classification (TG-32.6) must be 4 characters. | The minimum field length of Oil Viscosity/Classification (TG-32.6) must be 4 characters. | (TG-32.6) | Active | Not Under Development |
| VERIFY-11944 | Certification | Test Group | LD-CERT-TG-BR201 | If Model Year (TG-6) is greater than or equal to '2014' and at least one EPA Vehicle Class (TG-16) equals 'HDV1' (HDV1 (Federal HD chassis Class 2b GVW 8501-10000)) or 'HDV2' (HDV2 (Federal HD chassis Class 3 GVW 10001-14000)), then HD GHG 2b/3 Indicator (TG-6.5) must equal 'Y' (Yes). | If Model Year (TG-6) is greater than or equal to '2014' and at least one EPA Vehicle Class (TG-16) equals 'HDV1' (HDV1 (Federal HD chassis Class 2b GVW 8501-10000)) or 'HDV2' (HDV2 (Federal HD chassis Class 3 GVW 10001-14000)), then HD GHG 2b/3 Indicator (TG-6.5) must equal 'Y' (Yes). | (TG-6.5) | Active | Not Under Development |
| VERIFY-11946 | Certification | Test Group | LD-CERT-TG-BR202 | If HD GHG 2b/3 Indicator (TG-6.5) equals 'Y' (Yes), then at least one EPA Vehicle Class (TG-16) must equal 'HDV1' (HDV1 (Federal HD chassis Class 2b GVW 8501-10000)) or 'HDV2' (HDV2 (Federal HD chassis Class 3 GVW 10001-14000)). | If HD GHG 2b/3 Indicator (TG-6.5) equals 'Y' (Yes), then at least one EPA Vehicle Class (TG-16) must equal 'HDV1' (HDV1 (Federal HD chassis Class 2b GVW 8501-10000)) or 'HDV2' (HDV2 (Federal HD chassis Class 3 GVW 10001-14000)). | (TG-16) | Active | Not Under Development |
| VERIFY-12187 | Certification | Test Group | LD-CERT-TG-BR203 | If GHG Exempt Status (TG-216.7) equals 'NE' (Not Exempt) and HD GHG 2b/3 Indicator (TG-6.5) equals 'Y' (Yes), then a Test Result/Emission Name (TG-209) in the 'Exhaust Emission Standards' section equal to 'CO2' (Carbon Dioxide) must exist and is required to include either an Additive DF (TG-214) or a Multiplicative DF (TG-215), otherwise it is not allowed. | If GHG Exempt Status (TG-216.7) equals 'NE' (Not Exempt) and HD GHG 2b/3 Indicator (TG-6.5) equals 'Y' (Yes), then a Test Result/Emission Name (TG-209) in the 'Exhaust Emission Standards' section equal to 'CO2' (Carbon Dioxide) must exist and is required to include either an Additive DF (TG-214) or a Multiplicative DF (TG-215), otherwise it is not allowed. | (TG-209) (TG-214) (TG-215) | Active | Not Under Development |
| VERIFY-12189 | Certification | Test Group | LD-CERT-TG-BR204 | If HD GHG 2b/3 Indicator (TG-6.5) equals 'Y' (Yes), then a Test Result/Emission Name (TG-209) in the 'Exhaust Emission Standards' section equal to either 'CREE' (Carbon-Related Exhaust Emissions) or 'OPT-CREE' (Optional Carbon-Related Exhaust Emissions) must not exist. | If HD GHG 2b/3 Indicator (TG-6.5) equals 'Y' (Yes), then a Test Result/Emission Name (TG-209) in the 'Exhaust Emission Standards' section equal to either 'CREE' (Carbon-Related Exhaust Emissions) or 'OPT-CREE' (Optional Carbon-Related Exhaust Emissions) must not exist. | (TG-209) | Active | Not Under Development |
| VERIFY-22782 | Certification | Test Group | LD-CERT-TG-BR205 | If Model Year (TG-6) is greater than or equal to 2020, then Exhaust Emission Standard Level (TG-201) must not equal 'T3B110' (Federal Tier 3 Transitional Bin 110), 'T3B85' (Federal Tier 3 Transitional Bin 85), or 'T3SULEV30' (Federal Tier 3 Transitional LEVII-SULEV30 Carryover). | If Model Year (TG-6) is greater than or equal to 2020, then Exhaust Emission Standard Level (TG-201) must not equal 'T3B110' (Federal Tier 3 Transitional Bin 110), 'T3B85' (Federal Tier 3 Transitional Bin 85), or 'T3SULEV30' (Federal Tier 3 Transitional LEVII-SULEV30 Carryover). | (TG-201) | Not in the System | Under Development (To Be Added) |
| VERIFY-22784 | Certification | Test Group | LD-CERT-TG-BR206 | If Model Year (TG-6) is greater than or equal to 2022, then Exhaust Emission Standard Level (TG-201) must not equal 'HDV2B395' (Federal Tier 3 HD Class 2b Transitional Bin 395), 'HDV2B340' (Federal Tier 3 HD Class 2b Transitional Bin 340), 'HDV3B630' (Federal Tier 3 HD Class 3 Transitional Bin 630), or 'HDV3B570' (Federal Tier 3 HD Class 3 Transitional Bin 570). | If Model Year (TG-6) is greater than or equal to 2022, then Exhaust Emission Standard Level (TG-201) must not equal 'HDV2B395' (Federal Tier 3 HD Class 2b Transitional Bin 395), 'HDV2B340' (Federal Tier 3 HD Class 2b Transitional Bin 340), 'HDV3B630' (Federal Tier 3 HD Class 3 Transitional Bin 630), or 'HDV3B570' (Federal Tier 3 HD Class 3 Transitional Bin 570). | (TG-201) | Not in the System | Under Development (To Be Added) |
| VERIFY-22787 | Certification | Test Group | LD-CERT-TG-BR207 | If Model Year (TG-6) is greater than or equal to 2022, then Evaporative/Refueling Standard Level (TG-224) must not equal 'T3-3Z' (Federal Tier 3 LEV-III Zero Evap [Option 1] Carryover). | If Model Year (TG-6) is greater than or equal to 2022, then Evaporative/Refueling Standard Level (TG-224) must not equal 'T3-3Z' (Federal Tier 3 LEV-III Zero Evap [Option 1] Carryover). | (TG-224) | Not in the System | Under Development (To Be Added) |
| VERIFY-22867 | Certification | Test Group | LD-CERT-TG-BR209 | If SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes) and Test Group Fuel - SFTP LEV-III (TG-262) equals fuel other than 'EL' (Electricity) or 'HYD' (Hydraulic), then Official SFTP LEV-III FTP Test Number (TG-263) is required. | If SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes) and Test Group Fuel - SFTP LEV-III (TG-262) equals fuel other than 'EL' (Electricity) or 'HYD' (Hydraulic), then Official SFTP LEV-III FTP Test Number (TG-263) is required. | (TG-263) | Not in the System | Under Development (To Be Added) |
| VERIFY-22868 | Certification | Test Group | LD-CERT-TG-BR210 | Each Test Group Fuel - SFTP LEV-III (TG-262) selected for Official Test Numbers, must also be selected at least once for Fuel(s) (TG-7.3) for Drive Source. (Fuel <value> was selected for Official Test Numbers but not for Drive Source.) | Each Test Group Fuel - SFTP LEV-III (TG-262) selected for Official Test Numbers, must also be selected at least once for Fuel(s) (TG-7.3) for Drive Source. (Fuel <value> was selected for Official Test Numbers but not for Drive Source.) | (TG-7.3) (TG-262) | Not in the System | Under Development (To Be Added) |
| VERIFY-22869 | Certification | Test Group | LD-CERT-TG-BR211 | If there exists any Official SFTP LEV-III Test Number(s), then each of the Test Number(s) must be entered as an Exhaust Test Number (TG-202.5). | If there exists any Official SFTP LEV-III Test Number(s), then each of the Test Number(s) must be entered as an Exhaust Test Number (TG-202.5). | (TG-202.5) | Not in the System | Under Development (To Be Added) |
| VERIFY-22871 | Certification | Test Group | LD-CERT-TG-BR213 | If SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then the provided Official SFTP LEV-III FTP Test Number (TG-263) must identify a test that has CO (Carbon Monoxide) emission results (TI-19). | If SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then the provided Official SFTP LEV-III FTP Test Number (TG-263) must identify a test that has CO (Carbon Monoxide) emission results (TI-19). | (TG-263) | Not in the System | Under Development (To Be Added) |
| VERIFY-22872 | Certification | Test Group | LD-CERT-TG-BR214 | If SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER3' (Tier 3) or SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then there must be at least one exhaust emission standard with the Test Result/Emission Name (TG-209) of 'NMOG+NOX-COMP' (Non-Methane Organic Gas + Nitrogen Oxides SFTP Composite). | If SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER3' (Tier 3) or SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then there must be at least one exhaust emission standard with the Test Result/Emission Name (TG-209) of 'NMOG+NOX-COMP' (Non-Methane Organic Gas + Nitrogen Oxides SFTP Composite). | (TG-209) | Not in the System | Under Development (To Be Added) |
| VERIFY-22873 | Certification | Test Group | LD-CERT-TG-BR215 | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER3' (Tier 3), then for each NMOG+NOX-COMP (Non-Methane Organic Gases + NOx SFTP Composite) emission standard, there must also be NOX (Nitrogen Oxides) exhaust emission standards with the same Cert/In Use Code (TG-200.5) and Useful Life (TG-210) as the NMOG+NOX-COMP standard, and the same test procedure as the test identified by the Official FTP Test Number (TG-217). | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER3' (Tier 3), then for each NMOG+NOX-COMP (Non-Methane Organic Gases + NOx SFTP Composite) emission standard, there must also be NOX (Nitrogen Oxides) exhaust emission standards with the same Cert/In Use Code (TG-200.5) and Useful Life (TG-210) as the NMOG+NOX-COMP standard, and the same test procedure as the test identified by the Official FTP Test Number (TG-217). | (TG-200.5) (TG-210) (TG-217) | Not in the System | Under Development (To Be Added) |
| VERIFY-22874 | Certification | Test Group | LD-CERT-TG-BR216 | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER3' (Tier 3), then for each NMOG+NOX-COMP (Non-Methane Organic Gases + NOx SFTP Composite) emission standard, there must also be an NMOG (Non-Methane Organic Gases) exhaust emission standard with the same Cert/In Use Code (TG-200.5) and Useful Life (TG-210) as the NMOG+NOX-COMP standard, and the same test procedure as the test identified by the Official FTP Test Number (TG-217). | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER3' (Tier 3), then for each NMOG+NOX-COMP (Non-Methane Organic Gases + NOx SFTP Composite) emission standard, there must also be an NMOG (Non-Methane Organic Gases) exhaust emission standard with the same Cert/In Use Code (TG-200.5) and Useful Life (TG-210) as the NMOG+NOX-COMP standard, and the same test procedure as the test identified by the Official FTP Test Number (TG-217). | (TG-200.5) (TG-210) (TG-217) | Not in the System | Under Development (To Be Added) |
| VERIFY-22875 | Certification | Test Group | LD-CERT-TG-BR217 | If the SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then for each NMOG+NOX-COMP (Non-Methane Organic Gases + NOx SFTP Composite) emission standard, there must also be NOX (Nitrogen Oxides) exhaust emission standards with the same Cert/In Use Code (TG-200.5) and Useful Life (TG-210) as the NMOG+NOX-COMP standard, and the same test procedure as the test identified by the Official SFTP LEV-III FTP Test Number (TG-263). | If the SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then for each NMOG+NOX-COMP (Non-Methane Organic Gases + NOx SFTP Composite) emission standard, there must also be NOX (Nitrogen Oxides) exhaust emission standards with the same Cert/In Use Code (TG-200.5) and Useful Life (TG-210) as the NMOG+NOX-COMP standard, and the same test procedure as the test identified by the Official SFTP LEV-III FTP Test Number (TG-263). | (TG-200.5) (TG-210) (TG-263) | Not in the System | Under Development (To Be Added) |
| VERIFY-22876 | Certification | Test Group | LD-CERT-TG-BR218 | If the SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then for each NMOG+NOX-COMP (Non-Methane Organic Gases + NOx SFTP Composite) emission standard, there must also be an NMOG (Non-Methane Organic Gases) exhaust emission standard with the same Cert/In Use Code (TG-200.5) and Useful Life (TG-210) as the NMOG+NOX-COMP standard, and the same test procedure as the test identified by the Official SFTP LEV-III FTP Test Number (TG-263). | If the SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then for each NMOG+NOX-COMP (Non-Methane Organic Gases + NOx SFTP Composite) emission standard, there must also be an NMOG (Non-Methane Organic Gases) exhaust emission standard with the same Cert/In Use Code (TG-200.5) and Useful Life (TG-210) as the NMOG+NOX-COMP standard, and the same test procedure as the test identified by the Official SFTP LEV-III FTP Test Number (TG-263). | (TG-200.5) (TG-210) (TG-263) | Not in the System | Under Development (To Be Added) |
| VERIFY-22890 | Certification | Test Group | LD-CERT-TG-BR219 | Official SFTP LEV-III FTP Test Number (TG-263) must exist in Verify. | Official SFTP LEV-III FTP Test Number (TG-263) must exist in Verify. | (TG-263) | Not in the System | Under Development (To Be Added) |
| VERIFY-22891 | Certification | Test Group | LD-CERT-TG-BR220 | The Test 5-Cycle Category (TI-45) of the test entered in Official SFTP LEV-III FTP Test Number (TG-263) must equal 'FTP75' (Test Procedures (TI-8) = 2, 21, 25, 31, 35, 41, and 45). | The Test 5-Cycle Category (TI-45) of the test entered in Official SFTP LEV-III FTP Test Number (TG-263) must equal 'FTP75' (Test Procedures (TI-8) = 2, 21, 25, 31, 35, 41, and 45). | (TI-45) (TG-263) | Not in the System | Under Development (To Be Added) |
| VERIFY-22896 | Certification | Test Group | LD-CERT-TG-BR225 | If the SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then the Official SFTP LEV-III US06 Test Number (TG-264) must identify a test that has CO (Carbon Monoxide) emission results (TI-19). | If the SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then the Official SFTP LEV-III US06 Test Number (TG-264) must identify a test that has CO (Carbon Monoxide) emission results (TI-19). | (TI-19) (TG-264) | Not in the System | Under Development (To Be Added) |
| VERIFY-22897 | Certification | Test Group | LD-CERT-TG-BR226 | Official SFTP LEV-III US06 Test Number (TG-264) must exist in Verify. | Official SFTP LEV-III US06 Test Number (TG-264) must exist in Verify. | (TG-264) | Not in the System | Under Development (To Be Added) |
| VERIFY-22899 | Certification | Test Group | LD-CERT-TG-BR228 | The Analytically-Derived FE (ADFE) Indicator (TI-13.5) of the test entered in Official SFTP LEV-III FTP Test Number (TG-263) must not equal 'Y' (Yes). | The Analytically-Derived FE (ADFE) Indicator (TI-13.5) of the test entered in Official SFTP LEV-III FTP Test Number (TG-263) must not equal 'Y' (Yes). | (TG-263) | Not in the System | Under Development (To Be Added) |
| VERIFY-22900 | Certification | Test Group | LD-CERT-TG-BR229 | The Analytically-Derived FE (ADFE) Indicator (TI-13.5) of the test entered in Official SFTP LEV-III US06 Test Number (TG-264) must not equal 'Y' (Yes). | The Analytically-Derived FE (ADFE) Indicator (TI-13.5) of the test entered in Official SFTP LEV-III US06 Test Number (TG-264) must not equal 'Y' (Yes). | (TG-264) | Not in the System | Under Development (To Be Added) |
| VERIFY-22901 | Certification | Test Group | LD-CERT-TG-BR230 | The Analytically-Derived FE (ADFE) Indicator (TI-13.5) of the test entered in Official SFTP LEV-III SC03 Test Number (TG-265) must not equal 'Y' (Yes). | The Analytically-Derived FE (ADFE) Indicator (TI-13.5) of the test entered in Official SFTP LEV-III SC03 Test Number (TG-265) must not equal 'Y' (Yes). | (TG-265) | Not in the System | Under Development (To Be Added) |
| VERIFY-22902 | Certification | Test Group | LD-CERT-TG-BR231 | If the SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then the provided SC03 Test Number (TG-219) must exist in the system with a Test Category (TI-43) of 'SC03' (Test Procedure (TI-8) = 95). | If the SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then the provided SC03 Test Number (TG-219) must exist in the system with a Test Category (TI-43) of 'SC03' (Test Procedure (TI-8) = 95). | (TG-219) | Not in the System | Under Development (To Be Added) |
| VERIFY-22916 | Certification | Test Group | LD-CERT-TG-BR236 | If the SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then the Official SFTP LEV-III SC03 Test Number (TG-265) must identify a test that has CO (Carbon Monoxide) emission results (TI-19). | If the SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then the Official SFTP LEV-III SC03 Test Number (TG-265) must identify a test that has CO (Carbon Monoxide) emission results (TI-19). | (TI-19) (TG-265) | Not in the System | Under Development (To Be Added) |
| VERIFY-22917 | Certification | Test Group | LD-CERT-TG-BR237 | Official SFTP LEV-III SC03 Test Number (TG-265) must exist in Verify. | Official SFTP LEV-III SC03 Test Number (TG-265) must exist in Verify. | (TG-265) | Not in the System | Under Development (To Be Added) |
| VERIFY-22971 | Certification | Test Group | LD-CERT-TG-BR239 | If Hybrid Indicator (TG-7.2) equals 'Y' (Yes), then Official SFTP LEV-III FTP Test Number (TG-263) cannot be 3-bag emission tests (Associated Test Result/Emission Name (TI-19) of 'FE Bag 3' present and 'FE Bag 4' not present). | If Hybrid Indicator (TG-7.2) equals 'Y' (Yes), then Official SFTP LEV-III FTP Test Number (TG-263) cannot be 3-bag emission tests (Associated Test Result/Emission Name (TI-19) of 'FE Bag 3' present and 'FE Bag 4' not present). | (TG-263) | Not in the System | Under Development (To Be Added) |
| VERIFY-22997 | Certification | Test Group | LD-CERT-TG-BR240 | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER3' (Tier 3), then the Official FTP Test Number (TG-217) must identify a test that has NOX (Nitrogen Oxides) emission results (TI-19) and either NMOG (Non-Methane Organic Gases) or HC-NM (Non-Methane Hydrocarbon) emission results (TI-19). | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER3' (Tier 3), then the Official FTP Test Number (TG-217) must identify a test that has NOX (Nitrogen Oxides) emission results (TI-19) and either NMOG (Non-Methane Organic Gases) or HC-NM (Non-Methane Hydrocarbon) emission results (TI-19). | (TG-217) (TI-19) | Not in the System | Under Development (To Be Added) |
| VERIFY-22999 | Certification | Test Group | LD-CERT-TG-BR241 | If the SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then the Official SFTP LEV-III FTP Test Number (TG-263) must identify a test that has NOX (Nitrogen Oxides) emission results (TI-19) and either NMOG (Non-Methane Organic Gases) or HC-NM (Non-Methane Hydrocarbon) emission results (TI-19). | If the SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then the Official SFTP LEV-III FTP Test Number (TG-263) must identify a test that has NOX (Nitrogen Oxides) emission results (TI-19) and either NMOG (Non-Methane Organic Gases) or HC-NM (Non-Methane Hydrocarbon) emission results (TI-19). | (TG-263) (TI-19) | Not in the System | Under Development (To Be Added) |
| VERIFY-23000 | Certification | Test Group | LD-CERT-TG-BR242 | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER3' (Tier 3), then the Official US06 Test Number (TG-218) must identify a test that has NOX (Nitrogen Oxides) emission results (TI-19) and either NMOG (Non-Methane Organic Gases) or HC-NM (Non-Methane Hydrocarbon) emission results (TI-19). | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER3' (Tier 3), then the Official US06 Test Number (TG-218) must identify a test that has NOX (Nitrogen Oxides) emission results (TI-19) and either NMOG (Non-Methane Organic Gases) or HC-NM (Non-Methane Hydrocarbon) emission results (TI-19). | (TG-218) (TI-19) | Not in the System | Under Development (To Be Added) |
| VERIFY-23001 | Certification | Test Group | LD-CERT-TG-BR243 | If the SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then the Official SFTP LEV-III US06 Test Number (TG-264) must identify a test that has NOX (Nitrogen Oxides) emission results (TI-19) and either NMOG (Non-Methane Organic Gases) or HC-NM (Non-Methane Hydrocarbon) emission results (TI-19). | If the SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then the Official SFTP LEV-III US06 Test Number (TG-264) must identify a test that has NOX (Nitrogen Oxides) emission results (TI-19) and either NMOG (Non-Methane Organic Gases) or HC-NM (Non-Methane Hydrocarbon) emission results (TI-19). | (TG-264) (TI-19) | Not in the System | Under Development (To Be Added) |
| VERIFY-23002 | Certification | Test Group | LD-CERT-TG-BR244 | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER3' (Tier 3), then the Official SC03 Test Number (TG-219) must identify a test that has NOX (Nitrogen Oxides) emission results (TI-19) and either NMOG (Non-Methane Organic Gases) or HC-NM (Non-Methane Hydrocarbon) emission results (TI-19). | If the SFTP Federal Compliance Identifier (TG-216.8) equals 'TIER3' (Tier 3), then the Official SC03 Test Number (TG-219) must identify a test that has NOX (Nitrogen Oxides) emission results (TI-19) and either NMOG (Non-Methane Organic Gases) or HC-NM (Non-Methane Hydrocarbon) emission results (TI-19). | (TG-219) (TI-19) | Not in the System | Under Development (To Be Added) |
| VERIFY-23003 | Certification | Test Group | LD-CERT-TG-BR245 | If the SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then the Official SFTP LEV-III SC03 Test Number (TG-265) must identify a test that has NOX (Nitrogen Oxides) emission results (TI-19) and either NMOG (Non-Methane Organic Gases) or HC-NM (Non-Methane Hydrocarbon) emission results (TI-19). | If the SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then the Official SFTP LEV-III SC03 Test Number (TG-265) must identify a test that has NOX (Nitrogen Oxides) emission results (TI-19) and either NMOG (Non-Methane Organic Gases) or HC-NM (Non-Methane Hydrocarbon) emission results (TI-19). | (TG-265) (TI-19) | Not in the System | Under Development (To Be Added) |
| VERIFY-23006 | Certification | Test Group | LD-CERT-TG-BR246 | If the Official SFTP LEV-III SC03 Test Number (TG-265) is not null (or blank) then Verify Calculated Rounded Adjusted Fuel Economy must be present for the test number entered. The test number specified for Official SFTP LEV-III SC03 Test Number (TG-265) will need to be resubmitted to allow Verify to perform this calculation. | If the Official SFTP LEV-III SC03 Test Number (TG-265) is not null (or blank) then Verify Calculated Rounded Adjusted Fuel Economy must be present for the test number entered. The test number specified for Official SFTP LEV-III SC03 Test Number (TG-265) will need to be resubmitted to allow Verify to perform this calculation. | (TG-265) | Not in the System | Under Development (To Be Added) |
| VERIFY-23027 | Certification | Test Group | LD-CERT-TG-BR247 | If the SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then the provided Official SFTP LEV-III US06 Test Number (TG-264) must exist in the system with a Test Category (TI-43) of 'US06' (Test Procedures (TI-8) = 16, 90, and 96). | If the SFTP LEV-III Compliance Indicator (TG-261) equals 'Y' (Yes), then the provided Official SFTP LEV-III US06 Test Number (TG-264) must exist in the system with a Test Category (TI-43) of 'US06' (Test Procedures (TI-8) = 16, 90, and 96). | (TG-264) | Not in the System | Under Development (To Be Added) |
| VERIFY-9399 | Certification | Test Group | LD-CERT-TG-GBR001 | LD-CERT-TG-GBR001 - If no Drive Source (TG-7.1) equals 'C' (Combustion Engine) then Number of After Treatment Devices (TG-53), ATD Comments (TG-54), ATD Number (TG-55), ATD Type (TG-56), ATD Precious Metal Type (TG-57), ATD Precious Metal Type Other Description (TG-58), Substrate Material (TG-59), Substrate Construction (TG-60), Direct Ozone Reduction Device (TG-74), DOR Device Other Description (TG-75), Emission Control Device Comments (TG-76)) and Substrate Construction Other Description (TG-102) are not allowed. | LD-CERT-TG-GBR001 - If no Drive Source (TG-7.1) equals 'C' (Combustion Engine) then Number of After Treatment Devices (TG-53), ATD Comments (TG-54), ATD Number (TG-55), ATD Type (TG-56), ATD Precious Metal Type (TG-57), ATD Precious Metal Type Other Description (TG-58), Substrate Material (TG-59), Substrate Construction (TG-60), Direct Ozone Reduction Device (TG-74), DOR Device Other Description (TG-75), Emission Control Device Comments (TG-76)) and Substrate Construction Other Description (TG-102) are not allowed. | (TG-53) (TG-54) (TG-55) (TG-56) (TG-57) (TG-58) (TG-59) (TG-60) (TG-74) (TG-75) (TG-76) (TG-102) | Active | Not Under Development |
| VERIFY-9401 | Certification | Test Group | LD-CERT-TG-GBR002 | LD-CERT-TG-GBR002 - If no Drive Source (TG-7.1) equals 'C' (Combustion Engine) then Hybrid Type (TG-26), Hybrid Type Description if Other (TG-27), Engine Type (TG-28), Engine Type Description (TG-29), Engine Block Arrangement (TG-30), Engine Block Arrangement Description if Other (TG-31), Number of Cylinders/Rotors (TG-32), Camless Valvetrain Indicator (TG-32.5), Oil Viscosity/Classification (TG-32.6), Engine Configuration Number (TG-36), Engine Rated Horsepower (TG-37), Engine Displacement (TG-38), Cylinder Deactivation (TG-39), Cylinder Deactivation Description (TG-40), Variable Valve Timing (TG-41), Variable Valve Timing System Description (TG-42), Variable Valve Lift (TG-43), Variable Valve Lift System Description (TG-44), Number of Inlet Valves per Cylinder (TG-45), Number of Exhaust Valves Per Cylinder (TG-46), Air Aspiration Method (TG-47), Number of Air Aspiration Devices (TG-48), Air Aspiration Device Configuration (TG-49), Air Aspiration Method Other (TG-50), Charge Air Cooler Type (TG-51), Engine Configuration Comments (TG-52), Number Air Fuel Sensors (TG-61), Air/Fuel Sensor Number (TG-62), Air Fuel Sensor Type (TG-63), Air Fuel Sensor Type Other (TG-64), Number Knock Sensors (TG-65), Sensor Comments (TG-66), Exhaust Gas Recirculation (TG-67), Cooled Exhaust Gas Recirculation (TG-68), EGR Type (TG-69), EGR Other Description (TG-70), Closed Loop Air Injection System (TG-71), Air Injection Type (TG-72) and Air Injection Other Description (TG-73) are not allowed. |
LD-CERT-TG-GBR002 - If no Drive Source (TG-7.1) equals 'C' (Combustion Engine) then Hybrid Type (TG-26), Hybrid Type Description if Other (TG-27), Engine Type (TG-28), Engine Type Description (TG-29), Engine Block Arrangement (TG-30), Engine Block Arrangement Description if Other (TG-31), Number of Cylinders/Rotors (TG-32), Camless Valvetrain Indicator (TG-32.5), Oil Viscosity/Classification (TG-32.6), Engine Configuration Number (TG-36), Engine Rated Horsepower (TG-37), Engine Displacement (TG-38), Cylinder Deactivation (TG-39), Cylinder Deactivation Description (TG-40), Variable Valve Timing (TG-41), Variable Valve Timing System Description (TG-42), Variable Valve Lift (TG-43), Variable Valve Lift System Description (TG-44), Number of Inlet Valves per Cylinder (TG-45), Number of Exhaust Valves Per Cylinder (TG-46), Air Aspiration Method (TG-47), Number of Air Aspiration Devices (TG-48), Air Aspiration Device Configuration (TG-49), Air Aspiration Method Other (TG-50), Charge Air Cooler Type (TG-51), Engine Configuration Comments (TG-52), Number Air Fuel Sensors (TG-61), Air/Fuel Sensor Number (TG-62), Air Fuel Sensor Type (TG-63), Air Fuel Sensor Type Other (TG-64), Number Knock Sensors (TG-65), Sensor Comments (TG-66), Exhaust Gas Recirculation (TG-67), Cooled Exhaust Gas Recirculation (TG-68), EGR Type (TG-69), EGR Other Description (TG-70), Closed Loop Air Injection System (TG-71), Air Injection Type (TG-72) and Air Injection Other Description (TG-73) are not allowed. |
(TG-26) (TG-27) (TG-28) (TG-29) (TG-30) (TG-31) (TG-32) (TG-32.5) (TG-32.6) (TG-36) (TG-37) (TG-38) (TG-39) (TG-40) (TG-41) (TG-42) (TG-43) (TG-44) (TG-45) (TG-46) (TG-47) (TG-48) (TG-49) (TG-50) (TG-51) (TG-52) (TG-61) (TG-62) (TG-63) (TG-64) et al. | Active | Not Under Development |
| VERIFY-9402 | Certification | Test Group | LD-CERT-TG-GBR003 | LD-CERT-TG-GBR003 - If no Drive Source (TG-7.1) equals 'E' (Electric Motor) then Energy Storage Device (TG-77), Rechargeable Energy Storage Device Other Description (TG-78), Battery Type (TG-79), Other Battery Type Description (TG-80), Number of Batteries (TG-81), Total Voltage of Battery Packs (TG-82), Battery Energy Capacity (TG-83), Battery Specific Energy (TG-84), Battery Charger Type (TG-85),Number of Capacitors (TG-86), Capacitor Rating (TG-87), Capacitor Comments (TG-88), Hydraulic System Description (TG-89), Regenerative Braking Type (TG-90), Regenerative Braking Type Other Description (TG-91), Regenerative Braking Source (TG-92), Driver Controlled Regenerative Braking (TG-93), Number of Drive Motor Generators (TG-94), Motor Generator Type (TG-95), Other Motor Generator Type Other Description (TG-96), Rated Motor Generator Power (TG-97), Fuel Cell Description (TG-98), Fuel Cell On board H2 Storage Capacity (TG-99), Usable H2 Fill Capacity (TG-100) and HEV EV Comments (TG-101) are not allowed. |
LD-CERT-TG-GBR003 - If no Drive Source (TG-7.1) equals 'E' (Electric Motor) then Energy Storage Device (TG-77), Rechargeable Energy Storage Device Other Description (TG-78), Battery Type (TG-79), Other Battery Type Description (TG-80), Number of Batteries (TG-81), Total Voltage of Battery Packs (TG-82), Battery Energy Capacity (TG-83), Battery Specific Energy (TG-84), Battery Charger Type (TG-85),Number of Capacitors (TG-86), Capacitor Rating (TG-87), Capacitor Comments (TG-88), Hydraulic System Description (TG-89), Regenerative Braking Type (TG-90), Regenerative Braking Type Other Description (TG-91), Regenerative Braking Source (TG-92), Driver Controlled Regenerative Braking (TG-93), Number of Drive Motor Generators (TG-94), Motor Generator Type (TG-95), Other Motor Generator Type Other Description (TG-96), Rated Motor Generator Power (TG-97), Fuel Cell Description (TG-98), Fuel Cell On board H2 Storage Capacity (TG-99), Usable H2 Fill Capacity (TG-100) and HEV EV Comments (TG-101) are not allowed. |
(TG-77) (TG-78) (TG-79) (TG-80) (TG-81) (TG-82) (TG-83) (TG-84) (TG-85) (TG-86) (TG-87) (TG-88) (TG-89) (TG-90) (TG-91) (TG-92) (TG-93) (TG-94) (TG-95) (TG-96) (TG-97) (TG-98) (TG-99) (TG-100) (TG-101) | Active | Not Under Development |
| VERIFY-3405 | Certification | Test Group | LD-CERT-TG-IBR001 | The selected value for Drive Source (TG-7.1) is not a valid value. | The selected value for Drive Source (TG-7.1) is not a valid value. | (TG-7.1) | Active | Not Under Development |
| VERIFY-3406 | Certification | Test Group | LD-CERT-TG-IBR002a | The selected value for Fuel(s) (TG-7.3) is not a valid value. | The selected value for Fuel(s) (TG-7.3) is not a valid value. | (TG-7.3) | Active | Not Under Development |
| VERIFY-3683 | Certification | Test Group | LD-CERT-TG-IBR002b | The selected value for Fuel(s) (TG-217.1) is not a valid value. | The selected value for Fuel(s) (TG-217.1) is not a valid value. | (TG-217.1) | Active | Not Under Development |
| VERIFY-3684 | Certification | Test Group | LD-CERT-TG-IBR002c | The selected value for Fuel(s) (TG-204) is not a valid value. | The selected value for Fuel(s) (TG-204) is not a valid value. | (TG-204) | Active | Not Under Development |
| VERIFY-3685 | Certification | Test Group | LD-CERT-TG-IBR002d | The selected value for Fuel(s) (TG-223) is not a valid value. | The selected value for Fuel(s) (TG-223) is not a valid value. | (TG-223) | Active | Not Under Development |
| VERIFY-3407 | Certification | Test Group | LD-CERT-TG-IBR003 | The selected value for Basic fuel metering system (TG-7.4) is not a valid value. | The selected value for Basic fuel metering system (TG-7.4) is not a valid value. | (TG-7.4) | Active | Not Under Development |
| VERIFY-3408 | Certification | Test Group | LD-CERT-TG-IBR004 | The selected value for GHG Exempt Status (TG-216.7) is not a valid value. | The selected value for GHG Exempt Status (TG-216.7) is not a valid value. | (TG-216.7) | Active | Not Under Development |
| VERIFY-3686 | Certification | Test Group | LD-CERT-TG-IBR005 | The maximum allowable value for CREE Weighting Factor For Dual/Multiple Fuel Vehicles (TG-7.5) is 1.0. | The maximum allowable value for CREE Weighting Factor For Dual/Multiple Fuel Vehicles (TG-7.5) is 1.0. | (TG-7.5) | Active | Not Under Development |
| VERIFY-3687 | Certification | Test Group | LD-CERT-TG-IBR006 | The maximum allowable value for Durability Group Equivalency Factor (TG-13) is 5.0. | The maximum allowable value for Durability Group Equivalency Factor (TG-13) is 5.0. | (TG-13) | Active | Not Under Development |
| VERIFY-5647 | Certification | Test Group | LD-CERT-TG-IBR007 | Each Fuel(s) (TG-7.3) may only be selected once per Drive Source (TG-7.1). | Each Fuel(s) (TG-7.3) may only be selected once per Drive Source (TG-7.1). | (TG-7.3) | Active | Not Under Development |
| VERIFY-4896 | Fuel Economy | CAFE | LD-FE-CA-BR001a | If Process Code (CA-3) is equal to 'R' (Report) or 'C' (Correction), then a record must exist in the system with the same CAFE/GHG Compliance Category (CA-4), Manufacturer Code (CA-0), and Model Year (CA-1). | If Process Code (CA-3) is equal to 'R' (Report) or 'C' (Correction), then a record must exist in the system with the same CAFE/GHG Compliance Category (CA-4), Manufacturer Code (CA-0), and Model Year (CA-1). | (CA-4) (CA-0) (CA-1) | Active | Not Under Development |
| VERIFY-4581 | Fuel Economy | CAFE | LD-FE-CA-BR001b | If Process Code (CA-3) is equal to 'R' (Report) or 'C' (Correction), then a record must exist in the system with the same CAFE/GHG Compliance Category (CA-4), Manufacturer Code (CA-0), and Model Year (CA-1). | If Process Code (CA-3) is equal to 'R' (Report) or 'C' (Correction), then a record must exist in the system with the same CAFE/GHG Compliance Category (CA-4), Manufacturer Code (CA-0), and Model Year (CA-1). | (CA-4) (CA-0) (CA-1) | Active | Not Under Development |
| VERIFY-4879 | Fuel Economy | CAFE | LD-FE-CA-BR002 | If Process Code (CA-3) is equal to 'N' (New), then a record must not exist in the system with the same CAFE/GHG Compliance Category (CA-4), Manufacturer Code (CA-0), and Model Year (CA-1). | If Process Code (CA-3) is equal to 'N' (New), then a record must not exist in the system with the same CAFE/GHG Compliance Category (CA-4), Manufacturer Code (CA-0), and Model Year (CA-1). | (CA-4) (CA-0) (CA-1) | Active | Not Under Development |
| VERIFY-4853 | Fuel Economy | CAFE | LD-FE-CA-BR004 | If Model Year (CA-1) is greater or equal to 2011, then CAFE Standard Type (CA-10) is required to equal 'R' (Reformed CAFE). | If Model Year (CA-1) is greater or equal to 2011, then CAFE Standard Type (CA-10) is required to equal 'R' (Reformed CAFE). | (CA-10) | Active | Not Under Development |
| VERIFY-5599 | Fuel Economy | CAFE | LD-FE-CA-BR008 | A Fuel Economy Label must exist in the system for the Model Type Index (CA-25), Carline Manufacturer Code (CA-25.1), and Model Year (CA-1). | A Fuel Economy Label must exist in the system for the Model Type Index (CA-25), Carline Manufacturer Code (CA-25.1), and Model Year (CA-1). | (CA-25) (CA-25.1) (CA-1) | Active | Not Under Development |
| VERIFY-4621 | Fuel Economy | CAFE | LD-FE-CA-BR010 | Test Number (CA-35) must exist in Test Information (TI-1). | Test Number (CA-35) must exist in Test Information (TI-1). | (CA-35) | Active | Not Under Development |
| VERIFY-4732 | Fuel Economy | CAFE | LD-FE-CA-BR011a | If Subconfiguration Index (CA-29.5) is between 1 and 49 (inclusive) indicating that it is a 'tested' subconfiguration, then Test Number (CA-35) is required, otherwise it is not allowed. | If Subconfiguration Index (CA-29.5) is between 1 and 49 (inclusive) indicating that it is a 'tested' subconfiguration, then Test Number (CA-35) is required, otherwise it is not allowed. | (CA-35) | Active | Not Under Development |
| VERIFY-4903 | Fuel Economy | CAFE | LD-FE-CA-BR011b | If Subconfiguration Index (CA-29.5) is between 1 and 49 (inclusive) indicating that it is a 'tested' subconfiguration, then Test Number (CA-35) is required, otherwise it is not allowed. | If Subconfiguration Index (CA-29.5) is between 1 and 49 (inclusive) indicating that it is a 'tested' subconfiguration, then Test Number (CA-35) is required, otherwise it is not allowed. | (CA-35) | Active | Not Under Development |
| VERIFY-4647 | Fuel Economy | CAFE | LD-FE-CA-BR012 | The Test 5-Cycle Category (TI-45) for this Test Number (CA-35) must be equal to 'FTP75' (Test Procedure equal to '2', '21', '25', '31', '35', '41', '45'), or 'HWY' (Test Procedure equal to '3'), or the Test Procedure must be equal to '81' (Charge Depleting UDDS) or '84' (Charge Depleting Highway). | The Test 5-Cycle Category (TI-45) for this Test Number (CA-35) must be equal to 'FTP75' (Test Procedure equal to '2', '21', '25', '31', '35', '41', '45'), or 'HWY' (Test Procedure equal to '3'), or the Test Procedure must be equal to '81' (Charge Depleting UDDS) or '84' (Charge Depleting Highway). | (CA-35) (TI-45) | Active | Not Under Development |
| VERIFY-4733 | Fuel Economy | CAFE | LD-FE-CA-BR013 | If Averaging Method (CA-40) is equal to 'N' (No Averaging), then Averaging Group Indicator (CA-41) must not be present. | If Averaging Method (CA-40) is equal to 'N' (No Averaging), then Averaging Group Indicator (CA-41) must not be present. | (CA-41) | Active | Not Under Development |
| VERIFY-4793 | Fuel Economy | CAFE | LD-FE-CA-BR014 | If Averaging Method (CA-40) is not equal to 'N' (No Averaging), then Averaging Weighting Factor (CA-42) is required. | If Averaging Method (CA-40) is not equal to 'N' (No Averaging), then Averaging Weighting Factor (CA-42) is required. | (CA-42) | Active | Not Under Development |
| VERIFY-4876 | Fuel Economy | CAFE | LD-FE-CA-BR016 | If the Process Code (CA-3) is equal to 'R' (Report), then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (CA-0) of the dataset for which the report was requested. | If the Process Code (CA-3) is equal to 'R' (Report), then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (CA-0) of the dataset for which the report was requested. | (CA-0) | Active | Not Under Development |
| VERIFY-4777 | Fuel Economy | CAFE | LD-FE-CA-BR017 | If the Process Code (CA-3) is equal to 'N' (New) or 'C' (Correction), then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (CA-0) of the submitted dataset. | If the Process Code (CA-3) is equal to 'N' (New) or 'C' (Correction), then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (CA-0) of the submitted dataset. | (CA-0) | Active | Not Under Development |
| VERIFY-4736 | Fuel Economy | CAFE | LD-FE-CA-BR018 | If CAFE Standard Type (CA-10) is equal to 'R' (Reformed CAFE) and CAFE/GHG Compliance Category (CA-4) is equal to 'LT' (Light Trucks), then Manufacturer Calculated Unrounded Reformed Truck CAFE Standard (CA-22.3) is required, otherwise it is not allowed. | If CAFE Standard Type (CA-10) is equal to 'R' (Reformed CAFE) and CAFE/GHG Compliance Category (CA-4) is equal to 'LT' (Light Trucks), then Manufacturer Calculated Unrounded Reformed Truck CAFE Standard (CA-22.3) is required, otherwise it is not allowed. | (CA-22.3) | Active | Not Under Development |
| VERIFY-4874 | Fuel Economy | CAFE | LD-FE-CA-BR020 | The Fuel Usage for the Test Number (CA-35) must be the same as one of the Fuel Usages (GL-89) for the Label. | The Fuel Usage for the Test Number (CA-35) must be the same as one of the Fuel Usages (GL-89) for the Label. | (CA-35) (GL-89) | Active | Not Under Development |
| VERIFY-4914 | Fuel Economy | CAFE | LD-FE-CA-BR021a | Manufacturer Code (CA-0) must exist in the system. | Manufacturer Code (CA-0) must exist in the system. | (CA-0) | Active | Not Under Development |
| VERIFY-4628 | Fuel Economy | CAFE | LD-FE-CA-BR021b | Manufacturer Code (CA-0) must exist in the system. | Manufacturer Code (CA-0) must exist in the system. | (CA-0) | Active | Not Under Development |
| VERIFY-14874 | Fuel Economy | CAFE | LD-FE-CA-BR021c | Manufacturer Code (CA-0) must exist in the system. | Manufacturer Code (CA-0) must exist in the system. | (CA-0) | Active | Not Under Development |
| VERIFY-4592 | Fuel Economy | CAFE | LD-FE-CA-BR023 | Each Base Level within a Model Type must have a unique Inertia Weight Class (CA-25.6). | Each Base Level within a Model Type must have a unique Inertia Weight Class (CA-25.6). | (CA-25.6) | Active | Not Under Development |
| VERIFY-4573 | Fuel Economy | CAFE | LD-FE-CA-BR024 | Each Configuration within a Base Level must have a unique Configuration Index Number (CA-26). | Each Configuration within a Base Level must have a unique Configuration Index Number (CA-26). | (CA-26) | Active | Not Under Development |
| VERIFY-4873 | Fuel Economy | CAFE | LD-FE-CA-BR025 | Each SubConfiguration within a Configuration must have a unique SubConfiguration Index Number (CA-29.5). | Each SubConfiguration within a Configuration must have a unique SubConfiguration Index Number (CA-29.5). | (CA-29.5) | Active | Not Under Development |
| VERIFY-4714 | Fuel Economy | CAFE | LD-FE-CA-BR026 | Each Configuration within a Base Level must be a unique combination of Engine Code (CA-28), Axle Ratio (CA-29), and Transmission Configuration Code (CA-27). | Each Configuration within a Base Level must be a unique combination of Engine Code (CA-28), Axle Ratio (CA-29), and Transmission Configuration Code (CA-27). | (CA-29) (CA-27) (CA-28) | Active | Not Under Development |
| VERIFY-4882 | Fuel Economy | CAFE | LD-FE-CA-BR027 | Each SubConfiguration within a Configuration must be a unique combination of Equivalent Test Weight (CA-31) and Road Load Horsepower (CA-30). | Each SubConfiguration within a Configuration must be a unique combination of Equivalent Test Weight (CA-31) and Road Load Horsepower (CA-30). | (CA-31) (CA-30) | Active | Not Under Development |
| VERIFY-10384 | Fuel Economy | CAFE | LD-FE-CA-BR032 | If the Carline Manufacturer Code (CA-25.1) of the Model Type is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Carline Manufacturer for the Submitting Manufacturer to use the Carline associated with the FE Label submission referenced by the combination of Model Year (CA-1), Carline Mfr Code (CA-25.1), and Model Type Index (CA-25). | If the Carline Manufacturer Code (CA-25.1) of the Model Type is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Carline Manufacturer for the Submitting Manufacturer to use the Carline associated with the FE Label submission referenced by the combination of Model Year (CA-1), Carline Mfr Code (CA-25.1), and Model Type Index (CA-25). | (CA-25) (CA-25.1) | Active | Not Under Development |
| VERIFY-4814 | Fuel Economy | CAFE | LD-FE-CA-BR033 | If Model Year (CA-1) is greater than or equal to 2012, and GHG Calculation Method (CA-128) is equal to 'OPT-CREE' (Opt-CREE) then Opt-CREE N2O Default Indicator (CA-129) is required. Otherwise it is optional. | If Model Year (CA-1) is greater than or equal to 2012, and GHG Calculation Method (CA-128) is equal to 'OPT-CREE' (Opt-CREE) then Opt-CREE N2O Default Indicator (CA-129) is required. Otherwise it is optional. | (CA-129) | Active | Not Under Development |
| VERIFY-4871 | Fuel Economy | CAFE | LD-FE-CA-BR034 | If Model Year (CA-1) is greater than or equal to 2012, then GHG Exempt Indicator (CA-127) is required. Otherwise it is optional. | If Model Year (CA-1) is greater than or equal to 2012, then GHG Exempt Indicator (CA-127) is required. Otherwise it is optional. | (CA-127) | Active | Not Under Development |
| VERIFY-4633 | Fuel Economy | CAFE | LD-FE-CA-BR035 | If Model Year (CA-1) is greater than or equal to 2012, then GHG Calculation Method (CA-128) is required. Otherwise it is optional. | If Model Year (CA-1) is greater than or equal to 2012, then GHG Calculation Method (CA-128) is required. Otherwise it is optional. | (CA-128) | Active | Not Under Development |
| VERIFY-4741 | Fuel Economy | CAFE | LD-FE-CA-BR039 | If Model Year (CA-1) is greater than or equal to 2012, then Manufacturer Calculated Official Model Year GHG Production Units (CA-132) is required. Otherwise it is optional. | If Model Year (CA-1) is greater than or equal to 2012, then Manufacturer Calculated Official Model Year GHG Production Units (CA-132) is required. Otherwise it is optional. | (CA-132) | Active | Not Under Development |
| VERIFY-4720 | Fuel Economy | CAFE | LD-FE-CA-BR040 | If CAFE/GHG Compliance category (CA-4) is equal to 'LT' (Light Truck), then Manufacturer Calculated Official Model Year Truck CAFE Production Units (CA-50) is required. Otherwise it is optional. | If CAFE/GHG Compliance category (CA-4) is equal to 'LT' (Light Truck), then Manufacturer Calculated Official Model Year Truck CAFE Production Units (CA-50) is required. Otherwise it is optional. | (CA-50) | Active | Not Under Development |
| VERIFY-4775 | Fuel Economy | CAFE | LD-FE-CA-BR041 | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Official Model Year Domestic Passenger Vehicle CAFE Production Units (CA-51) is required. Otherwise it is optional. | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Official Model Year Domestic Passenger Vehicle CAFE Production Units (CA-51) is required. Otherwise it is optional. | (CA-51) | Active | Not Under Development |
| VERIFY-4759 | Fuel Economy | CAFE | LD-FE-CA-BR042 | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Official Model Year Import Passenger Vehicle CAFE Production Units (CA-52) is required. Otherwise it is optional. | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Official Model Year Import Passenger Vehicle CAFE Production Units (CA-52) is required. Otherwise it is optional. | (CA-52) | Active | Not Under Development |
| VERIFY-4915 | Fuel Economy | CAFE | LD-FE-CA-BR055 | If Model Year (CA-1) is greater than or equal to 2012, then Manufacturer Calculated Baseline Average GHG Unrounded 4 Decimal (CA-138) is required. Otherwise it is optional. | If Model Year (CA-1) is greater than or equal to 2012, then Manufacturer Calculated Baseline Average GHG Unrounded 4 Decimal (CA-138) is required. Otherwise it is optional. | (CA-138) | Active | Not Under Development |
| VERIFY-4763 | Fuel Economy | CAFE | LD-FE-CA-BR056 | If GHG TLAAS Indicator (CA-156) is equal to 'Y' (Yes) for any Model Type in the CAFE/GHG submission then Manufacturer Calculated Baseline Average GHG TLAAS Unrounded 4 Decimal (CA-139) is required. Otherwise it is optional. | If GHG TLAAS Indicator (CA-156) is equal to 'Y' (Yes) for any Model Type in the CAFE/GHG submission then Manufacturer Calculated Baseline Average GHG TLAAS Unrounded 4 Decimal (CA-139) is required. Otherwise it is optional. | (CA-139) | Active | Not Under Development |
| VERIFY-4669 | Fuel Economy | CAFE | LD-FE-CA-BR057 | If CAFE/GHG Compliance Category (CA-4) is equal to 'LT' (Light Truck), then Manufacturer Calculated Baseline Truck CAFE Unrounded 4 Decimal (CA-56) is required. Otherwise it is optional. | If CAFE/GHG Compliance Category (CA-4) is equal to 'LT' (Light Truck), then Manufacturer Calculated Baseline Truck CAFE Unrounded 4 Decimal (CA-56) is required. Otherwise it is optional. | (CA-56) | Active | Not Under Development |
| VERIFY-4680 | Fuel Economy | CAFE | LD-FE-CA-BR058 | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Baseline Domestic Passenger Vehicle CAFE Unrounded Unadjusted 4 Decimal (CA-57) is required. Otherwise it is optional. | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Baseline Domestic Passenger Vehicle CAFE Unrounded Unadjusted 4 Decimal (CA-57) is required. Otherwise it is optional. | (CA-57) | Active | Not Under Development |
| VERIFY-4579 | Fuel Economy | CAFE | LD-FE-CA-BR059 | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Baseline Import Passenger Vehicle CAFE Unrounded Unadjusted 4 Decimal (CA-58) is required. Otherwise it is optional. | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Baseline Import Passenger Vehicle CAFE Unrounded Unadjusted 4 Decimal (CA-58) is required. Otherwise it is optional. | (CA-58) | Active | Not Under Development |
| VERIFY-4931 | Fuel Economy | CAFE | LD-FE-CA-BR060 | If Model Year (CA-1) is greater than or equal to 2012, then Manufacturer Calculated Baseline Average GHG Rounded Whole Number (CA-140) is required. Otherwise it is optional. | If Model Year (CA-1) is greater than or equal to 2012, then Manufacturer Calculated Baseline Average GHG Rounded Whole Number (CA-140) is required. Otherwise it is optional. | (CA-140) | Active | Not Under Development |
| VERIFY-4921 | Fuel Economy | CAFE | LD-FE-CA-BR061 | If GHG TLAAS Indicator (CA-156) is equal to 'Y' (Yes) for any Model Type in the CAFE/GHG submission then Manufacturer Calculated Baseline Average GHG TLAAS Rounded Whole Number (CA-141) is required. Otherwise it is optional. | If GHG TLAAS Indicator (CA-156) is equal to 'Y' (Yes) for any Model Type in the CAFE/GHG submission then Manufacturer Calculated Baseline Average GHG TLAAS Rounded Whole Number (CA-141) is required. Otherwise it is optional. | (CA-141) | Active | Not Under Development |
| VERIFY-4773 | Fuel Economy | CAFE | LD-FE-CA-BR062 | If CAFE/GHG Compliance Category (CA-4) is equal to 'LT' (Light Truck), then Manufacturer Calculated Baseline Truck CAFE Rounded 1 Decimal (CA-62) is required. Otherwise it is optional. | If CAFE/GHG Compliance Category (CA-4) is equal to 'LT' (Light Truck), then Manufacturer Calculated Baseline Truck CAFE Rounded 1 Decimal (CA-62) is required. Otherwise it is optional. | (CA-62) | Active | Not Under Development |
| VERIFY-4864 | Fuel Economy | CAFE | LD-FE-CA-BR063 | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Baseline Domestic Passenger Vehicle CAFE Unrounded Test Procedure Adjusted 4 Decimal (CA-64) is required. Otherwise it is optional. | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Baseline Domestic Passenger Vehicle CAFE Unrounded Test Procedure Adjusted 4 Decimal (CA-64) is required. Otherwise it is optional. | (CA-64) | Active | Not Under Development |
| VERIFY-4922 | Fuel Economy | CAFE | LD-FE-CA-BR064 | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Baseline Import Passenger Vehicle CAFE Unrounded Test Procedure Adjusted 4 Decimal (CA-65) is required. Otherwise it is optional. | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Baseline Import Passenger Vehicle CAFE Unrounded Test Procedure Adjusted 4 Decimal (CA-65) is required. Otherwise it is optional. | (CA-65) | Active | Not Under Development |
| VERIFY-4744 | Fuel Economy | CAFE | LD-FE-CA-BR065 | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Baseline Domestic Passenger Vehicle CAFE Rounded Test Procedure Adjusted 1 Decimal (CA-68) is required. Otherwise it is optional. | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Baseline Domestic Passenger Vehicle CAFE Rounded Test Procedure Adjusted 1 Decimal (CA-68) is required. Otherwise it is optional. | (CA-68) | Active | Not Under Development |
| VERIFY-4892 | Fuel Economy | CAFE | LD-FE-CA-BR066 | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Baseline Import Passenger Vehicle CAFE Rounded Test Procedure Adjusted 1 Decimal (CA-69) is required. Otherwise it is optional. | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Baseline Import Passenger Vehicle CAFE Rounded Test Procedure Adjusted 1 Decimal (CA-69) is required. Otherwise it is optional. | (CA-69) | Active | Not Under Development |
| VERIFY-4819 | Fuel Economy | CAFE | LD-FE-CA-BR079 | If Model Year (CA-1) is greater than or equal to 2012, then Manufacturer Calculated Final Average GHG Unrounded 4 Decimal (CA-146) is required. Otherwise it is optional. | If Model Year (CA-1) is greater than or equal to 2012, then Manufacturer Calculated Final Average GHG Unrounded 4 Decimal (CA-146) is required. Otherwise it is optional. | (CA-146) | Active | Not Under Development |
| VERIFY-4895 | Fuel Economy | CAFE | LD-FE-CA-BR080 | If GHG TLAAS Indicator (CA-156) is equal to 'Y' (Yes) for any Model Type in the CAFE/GHG submission then Manufacturer Calculated Final Average GHG TLAAS Unrounded 4 Decimal (CA-147) is required. Otherwise it is optional. | If GHG TLAAS Indicator (CA-156) is equal to 'Y' (Yes) for any Model Type in the CAFE/GHG submission then Manufacturer Calculated Final Average GHG TLAAS Unrounded 4 Decimal (CA-147) is required. Otherwise it is optional. | (CA-147) | Active | Not Under Development |
| VERIFY-4595 | Fuel Economy | CAFE | LD-FE-CA-BR081 | If CAFE/GHG Compliance Category (CA-4) is equal to 'LT' (Light Truck), then Manufacturer Calculated Final Truck CAFE Unrounded 4 Decimal (CA-72) is required. Otherwise it is optional. | If CAFE/GHG Compliance Category (CA-4) is equal to 'LT' (Light Truck), then Manufacturer Calculated Final Truck CAFE Unrounded 4 Decimal (CA-72) is required. Otherwise it is optional. | (CA-72) | Active | Not Under Development |
| VERIFY-4664 | Fuel Economy | CAFE | LD-FE-CA-BR082 | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Final Domestic Passenger Vehicle CAFE Unrounded Unadjusted 4 Decimal (CA-73) is required. Otherwise it is optional. | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Final Domestic Passenger Vehicle CAFE Unrounded Unadjusted 4 Decimal (CA-73) is required. Otherwise it is optional. | (CA-73) | Active | Not Under Development |
| VERIFY-4650 | Fuel Economy | CAFE | LD-FE-CA-BR083 | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Final Import Passenger Vehicle CAFE Unrounded Unadjusted 4 Decimal (CA-74) is required. Otherwise it is optional. | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Final Import Passenger Vehicle CAFE Unrounded Unadjusted 4 Decimal (CA-74) is required. Otherwise it is optional. | (CA-74) | Active | Not Under Development |
| VERIFY-4830 | Fuel Economy | CAFE | LD-FE-CA-BR084 | If Model Year (CA-1) is greater than or equal to 2012, then Manufacturer Calculated Final Average GHG Rounded Whole Number (CA-148) is required. Otherwise it is optional. | If Model Year (CA-1) is greater than or equal to 2012, then Manufacturer Calculated Final Average GHG Rounded Whole Number (CA-148) is required. Otherwise it is optional. | (CA-148) | Active | Not Under Development |
| VERIFY-4582 | Fuel Economy | CAFE | LD-FE-CA-BR085 | If GHG TLAAS Indicator (CA-156) is equal to 'Y' (Yes) for any Model Type in the CAFE/GHG submission then Manufacturer Calculated Final Average GHG TLAAS Rounded Whole Number (CA-149) is required. Otherwise it is optional. | If GHG TLAAS Indicator (CA-156) is equal to 'Y' (Yes) for any Model Type in the CAFE/GHG submission then Manufacturer Calculated Final Average GHG TLAAS Rounded Whole Number (CA-149) is required. Otherwise it is optional. | (CA-149) | Active | Not Under Development |
| VERIFY-4791 | Fuel Economy | CAFE | LD-FE-CA-BR086 | If CAFE/GHG Compliance Category (CA-4) is equal to 'LT' (Light Truck), then Manufacturer Calculated Final Truck CAFE Rounded 1 Decimal (CA-150) is required. Otherwise it is optional. | If CAFE/GHG Compliance Category (CA-4) is equal to 'LT' (Light Truck), then Manufacturer Calculated Final Truck CAFE Rounded 1 Decimal (CA-150) is required. Otherwise it is optional. | (CA-150) | Active | Not Under Development |
| VERIFY-4696 | Fuel Economy | CAFE | LD-FE-CA-BR087 | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Final Domestic Passenger Vehicle CAFE Unrounded Test Procedure Adjusted 4 Decimal (CA-80) is required. Otherwise it is optional. | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Final Domestic Passenger Vehicle CAFE Unrounded Test Procedure Adjusted 4 Decimal (CA-80) is required. Otherwise it is optional. | (CA-80) | Active | Not Under Development |
| VERIFY-4743 | Fuel Economy | CAFE | LD-FE-CA-BR088 | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Final Import Passenger Vehicle CAFE Unrounded Test Procedure Adjusted 4 Decimal (CA-81) is required. Otherwise it is optional. | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Final Import Passenger Vehicle CAFE Unrounded Test Procedure Adjusted 4 Decimal (CA-81) is required. Otherwise it is optional. | (CA-81) | Active | Not Under Development |
| VERIFY-4708 | Fuel Economy | CAFE | LD-FE-CA-BR089 | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Final Domestic Passenger Vehicle CAFE Rounded Test Procedure Adjusted 1 Decimal (CA-84) is required. Otherwise it is optional. | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Final Domestic Passenger Vehicle CAFE Rounded Test Procedure Adjusted 1 Decimal (CA-84) is required. Otherwise it is optional. | (CA-84) | Active | Not Under Development |
| VERIFY-4902 | Fuel Economy | CAFE | LD-FE-CA-BR090 | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Final Import Passenger Vehicle CAFE Rounded Test Procedure Adjusted 1 Decimal (CA-85) is required. Otherwise it is optional. | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Final Import Passenger Vehicle CAFE Rounded Test Procedure Adjusted 1 Decimal (CA-85) is required. Otherwise it is optional. | (CA-85) | Active | Not Under Development |
| VERIFY-4604 | Fuel Economy | CAFE | LD-FE-CA-BR096 | If Model Year (CA-1) is greater than or equal to 2012, then Manufacturer Calculated Official Average GHG Grams Per Mile (CA-153) is required. Otherwise it is optional. | If Model Year (CA-1) is greater than or equal to 2012, then Manufacturer Calculated Official Average GHG Grams Per Mile (CA-153) is required. Otherwise it is optional. | (CA-153) | Active | Not Under Development |
| VERIFY-4606 | Fuel Economy | CAFE | LD-FE-CA-BR097 | If GHG TLAAS Indicator (CA-156) is equal to 'Y' (Yes) for any Model Type in the CAFE/GHG submission then Manufacturer Calculated Official Average GHG TLAAS Grams Per Mile (CA-154) is required. Otherwise it is optional. | If GHG TLAAS Indicator (CA-156) is equal to 'Y' (Yes) for any Model Type in the CAFE/GHG submission then Manufacturer Calculated Official Average GHG TLAAS Grams Per Mile (CA-154) is required. Otherwise it is optional. | (CA-154) | Active | Not Under Development |
| VERIFY-4611 | Fuel Economy | CAFE | LD-FE-CA-BR098 | If CAFE/GHG Compliance Category (CA-4) is equal to 'LT' (Light Truck), then Manufacturer Calculated Official Truck CAFE Miles Per Gallon (CA-88) is required. Otherwise it is optional. | If CAFE/GHG Compliance Category (CA-4) is equal to 'LT' (Light Truck), then Manufacturer Calculated Official Truck CAFE Miles Per Gallon (CA-88) is required. Otherwise it is optional. | (CA-88) | Active | Not Under Development |
| VERIFY-4624 | Fuel Economy | CAFE | LD-FE-CA-BR099 | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Official Domestic Passenger Vehicle CAFE Miles Per Gallon (CA-89) is required. Otherwise it is optional. | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Official Domestic Passenger Vehicle CAFE Miles Per Gallon (CA-89) is required. Otherwise it is optional. | (CA-89) | Active | Not Under Development |
| VERIFY-4695 | Fuel Economy | CAFE | LD-FE-CA-BR100 | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Official Import Passenger Vehicle CAFE Miles Per Gallon (CA-90) is required. Otherwise it is optional. | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then Manufacturer Calculated Official Import Passenger Vehicle CAFE Miles Per Gallon (CA-90) is required. Otherwise it is optional. | (CA-90) | Active | Not Under Development |
| VERIFY-4765 | Fuel Economy | CAFE | LD-FE-CA-BR101 | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then CAFE Domestic/Import Indicator (CA-155) is required. Otherwise it is optional. | If CAFE/GHG Compliance category (CA-4) is equal to 'PV' (Passenger Vehicle), then CAFE Domestic/Import Indicator (CA-155) is required. Otherwise it is optional. | (CA-155) | Active | Not Under Development |
| VERIFY-4829 | Fuel Economy | CAFE | LD-FE-CA-BR102a | If Model Year (CA-1) is greater than or equal to 2012 and Model Year (CA-1) is less than or equal to 2016, then GHG TLAAS Indicator (CA-156) is required, otherwise it is not allowed. | If Model Year (CA-1) is greater than or equal to 2012 and Model Year (CA-1) is less than or equal to 2016, then GHG TLAAS Indicator (CA-156) is required, otherwise it is not allowed. | (CA-156) | Active | Not Under Development |
| VERIFY-10480 | Fuel Economy | CAFE | LD-FE-CA-BR102b | If Model Year (CA-1) is greater than or equal to 2012 and Model Year (CA-1) is less than or equal to 2016, then GHG TLAAS Indicator (CA-156) is required, otherwise it is not allowed. | If Model Year (CA-1) is greater than or equal to 2012 and Model Year (CA-1) is less than or equal to 2016, then GHG TLAAS Indicator (CA-156) is required, otherwise it is not allowed. | (CA-156) | Active | Not Under Development |
| VERIFY-4806 | Fuel Economy | CAFE | LD-FE-CA-BR104 | If Model Year (CA-1) is greater than or equal to 2012, then Footprint Final Model Year GHG Production Units (CA-158) is required. Otherwise it is optional. | If Model Year (CA-1) is greater than or equal to 2012, then Footprint Final Model Year GHG Production Units (CA-158) is required. Otherwise it is optional. | (CA-158) | Active | Not Under Development |
| VERIFY-4810 | Fuel Economy | CAFE | LD-FE-CA-BR136 | If Model Year (CA-1) is greater than or equal to 2012, then Manufacturer Subconfiguration Final Model Year GHG Production Units (CA-193) is required. Otherwise it is optional. | If Model Year (CA-1) is greater than or equal to 2012, then Manufacturer Subconfiguration Final Model Year GHG Production Units (CA-193) is required. Otherwise it is optional. | (CA-193) | Active | Not Under Development |
| VERIFY-4789 | Fuel Economy | CAFE | LD-FE-CA-BR137 | If Model Year (CA-1) greater than or equal to 2011, then Averaging Method (CA-40) cannot be 'S' (Simple Averaging). | If Model Year (CA-1) greater than or equal to 2011, then Averaging Method (CA-40) cannot be 'S' (Simple Averaging). | (CA-40) | Active | Not Under Development |
| VERIFY-5600 | Fuel Economy | CAFE | LD-FE-CA-BR138 | If CAFE Standard Type (CA-10) is equal to 'R', then Carline Manufacturer Code (CA-11.5) is required. Otherwise it is optional. | If CAFE Standard Type (CA-10) is equal to 'R', then Carline Manufacturer Code (CA-11.5) is required. Otherwise it is optional. | (CA-11.5) | Active | Not Under Development |
| VERIFY-5601 | Fuel Economy | CAFE | LD-FE-CA-BR139 | If CAFE Standard Type (CA-10) is equal to 'R' (Reformed CAFE) then Division Code (CA-12) is required. Otherwise it is optional. | If CAFE Standard Type (CA-10) is equal to 'R' (Reformed CAFE) then Division Code (CA-12) is required. Otherwise it is optional. | (CA-12) | Active | Not Under Development |
| VERIFY-5602 | Fuel Economy | CAFE | LD-FE-CA-BR140 | If CAFE Standard Type (CA-10) is equal to 'R' (Reformed CAFE) then Carline Code (CA-13) is required. Otherwise it is optional. | If CAFE Standard Type (CA-10) is equal to 'R' (Reformed CAFE) then Carline Code (CA-13) is required. Otherwise it is optional. | (CA-13) | Active | Not Under Development |
| VERIFY-5605 | Fuel Economy | CAFE | LD-FE-CA-BR143 | If CAFE Standard Type (CA-10) is equal to 'R' (Reformed CAFE) then Footprint Index (CA-14.5) is required. Otherwise it is optional. | If CAFE Standard Type (CA-10) is equal to 'R' (Reformed CAFE) then Footprint Index (CA-14.5) is required. Otherwise it is optional. | (CA-14.5) | Active | Not Under Development |
| VERIFY-5607 | Fuel Economy | CAFE | LD-FE-CA-BR145 | If CAFE Standard Type (CA-10) is equal to 'R' (Reformed CAFE) then Footprint Final Model Year Production Units (CA-20) is required, otherwise it is optional. | If CAFE Standard Type (CA-10) is equal to 'R' (Reformed CAFE) then Footprint Final Model Year Production Units (CA-20) is required, otherwise it is optional. | (CA-20) | Active | Not Under Development |
| VERIFY-5617 | Fuel Economy | CAFE | LD-FE-CA-BR154 | If Model Year (CA-1) is greater than or equal to 2012, then Manufacturer Calculated Unrounded GHG Standard (CA-160) is required. Otherwise it is optional. | If Model Year (CA-1) is greater than or equal to 2012, then Manufacturer Calculated Unrounded GHG Standard (CA-160) is required. Otherwise it is optional. | (CA-160) | Active | Not Under Development |
| VERIFY-4649 | Fuel Economy | CAFE | LD-FE-CA-BR156 | If GHG TLAAS Indicator (CA-156) is equal to 'Y' (Yes) for any Model Type in the CAFE/GHG submission then Manufacturer Calculated Official Model Year GHG TLAAS Production Units (CA-133) is required. Otherwise it is optional. | If GHG TLAAS Indicator (CA-156) is equal to 'Y' (Yes) for any Model Type in the CAFE/GHG submission then Manufacturer Calculated Official Model Year GHG TLAAS Production Units (CA-133) is required. Otherwise it is optional. | (CA-133) | Active | Not Under Development |
| VERIFY-9458 | Fuel Economy | CAFE | LD-FE-CA-BR157 | If Footprint Index (CA-14.5) is provided in a CAFE submission then the Footprint Index (CA-14.5) must exist in the system for this Model Year (CA-1), Carline Manufacturer Code (CA-11.5), Division Code (CA-12) and Carline Code (CA-13). | If Footprint Index (CA-14.5) is provided in a CAFE submission then the Footprint Index (CA-14.5) must exist in the system for this Model Year (CA-1), Carline Manufacturer Code (CA-11.5), Division Code (CA-12) and Carline Code (CA-13). | (CA-14.5) | Active | Not Under Development |
| VERIFY-9941 | Fuel Economy | CAFE | LD-FE-CA-BR160 | If GHG Calculation Method (CA-128) is equal to 'OPT-CREE' and if Test Procedure (TI-8) does not equal to '81' (Charge Depleting UDDS) or '84' (Charge Depleting Hwy), then Rounded Adjusted OPT-CREE (TI-19.8) must exist. | If GHG Calculation Method (CA-128) is equal to 'OPT-CREE' and if Test Procedure (TI-8) does not equal to '81' (Charge Depleting UDDS) or '84' (Charge Depleting Hwy), then Rounded Adjusted OPT-CREE (TI-19.8) must exist. | (CA-128) (TI-19.8) | Active | Not Under Development |
| VERIFY-9942 | Fuel Economy | CAFE | LD-FE-CA-BR161 | If GHG Calculation Method (CA-128) is equal to 'OPT-CREE' and if Test Procedure (TI-8) does not equal to '81' (Charge Depleting UDDS) or '84' (Charge Depleting Hwy), then Test Result/Emission Name (TI-19) equal to 'OPT-CREE' must exist. | If GHG Calculation Method (CA-128) is equal to 'OPT-CREE' and if Test Procedure (TI-8) does not equal to '81' (Charge Depleting UDDS) or '84' (Charge Depleting Hwy), then Test Result/Emission Name (TI-19) equal to 'OPT-CREE' must exist. | (CA-128) (TI-19) | Active | Not Under Development |
| VERIFY-9943 | Fuel Economy | CAFE | LD-FE-CA-BR162 | If a CAFE/GHG submission already exists in Verify for the same manufacturer and model year (but for a different CAFE/GHG Compliance Category (CA-4)), then GHG Calculation Method (CA-128) must be identical to the one already submitted. | If a CAFE/GHG submission already exists in Verify for the same manufacturer and model year (but for a different CAFE/GHG Compliance Category (CA-4)), then GHG Calculation Method (CA-128) must be identical to the one already submitted. | (CA-128) | Active | Not Under Development |
| VERIFY-10493 | Fuel Economy | CAFE | LD-FE-CA-BR163 | If Footprint Index (CA-14.5) is provided and the Manufacturer Code of the Submission Author Details is not the same as the Carline Manufacturer Code (CA-11.5), then the submitting manufacturer must have permission to use the Carline derived from the Model Year (CA-1), Carline Manufacturer Code (CA-11.5), Division Code (CA-12) and Carline Code (CA-13). | If Footprint Index (CA-14.5) is provided and the Manufacturer Code of the Submission Author Details is not the same as the Carline Manufacturer Code (CA-11.5), then the submitting manufacturer must have permission to use the Carline derived from the Model Year (CA-1), Carline Manufacturer Code (CA-11.5), Division Code (CA-12) and Carline Code (CA-13). | (CA-0) | Active | Not Under Development |
| VERIFY-11171 | Fuel Economy | CAFE | LD-FE-CA-BR165 | Test Numbers (CA-35) with the following Test Fuel Types are not allowed for CAFE (Test Fuel Type (TI-9) : 8, 10, 24, 25, 26, 27, 31, 32, 33, 36, 45, 71). | Test Numbers (CA-35) with the following Test Fuel Types are not allowed for CAFE (Test Fuel Type (TI-9) : 8, 10, 24, 25, 26, 27, 31, 32, 33, 36, 45, 71). | (CA-35) | Active | Not Under Development |
| VERIFY-11789 | Fuel Economy | CAFE | LD-FE-CA-BR166 | If a subconfiguration contains a Test Number (CA-35) and the corresponding FE Label contains a Drive Source (GL-13.5.1) equal to 'C' (Combustion Engine), then within that subconfiguration, each unique combination of Vehicle ID (TI-4), Vehicle Configuration Number (TI-5), and Averaging Group Indicator (CA-41) must contain at least one test with a 5-Cycle Test Category (TI-45) equal to 'FTP75' (Test Procedure equal to 2, 21, 25, 31, 35, 41, or 45). | If a subconfiguration contains a Test Number (CA-35) and the corresponding FE Label contains a Drive Source (GL-13.5.1) equal to 'C' (Combustion Engine), then within that subconfiguration, each unique combination of Vehicle ID (TI-4), Vehicle Configuration Number (TI-5), and Averaging Group Indicator (CA-41) must contain at least one test with a 5-Cycle Test Category (TI-45) equal to 'FTP75' (Test Procedure equal to 2, 21, 25, 31, 35, 41, or 45). | (CA-41) (TI-4) (TI-5) (TI-45) | Active | Not Under Development |
| VERIFY-11790 | Fuel Economy | CAFE | LD-FE-CA-BR167 | If a subconfiguration contains a Test Number (CA-35) and the corresponding FE Label contains a Drive Source (GL-13.5.1) equal to 'C' (Combustion Engine), then within that subconfiguration, each unique combination of Vehicle ID (TI-4), Vehicle Configuration Number (TI-5), and Averaging Group Indicator (CA-41) must contain at least one test with a 5-Cycle Test Category (TI-45) equal to 'HWY' (Test Procedure equal to 3). | If a subconfiguration contains a Test Number (CA-35) and the corresponding FE Label contains a Drive Source (GL-13.5.1) equal to 'C' (Combustion Engine), then within that subconfiguration, each unique combination of Vehicle ID (TI-4), Vehicle Configuration Number (TI-5), and Averaging Group Indicator (CA-41) must contain at least one test with a 5-Cycle Test Category (TI-45) equal to 'HWY' (Test Procedure equal to 3). | (CA-41) (TI-4) (TI-5) (TI-45) | Active | Not Under Development |
| VERIFY-11791 | Fuel Economy | CAFE | LD-FE-CA-BR168 | Carline Code (CA-126) must exist in Verify for the Carline Manufacturer Code (CA-124), Division Code (CA-125), and Model Year (CA-1). | Carline Code (CA-126) must exist in Verify for the Carline Manufacturer Code (CA-124), Division Code (CA-125), and Model Year (CA-1). | (CA-1) (CA-124) (CA-125) (CA-126) | Active | Not Under Development |
| VERIFY-11792 | Fuel Economy | CAFE | LD-FE-CA-BR169 | The combination of the Carline Manufacturer Code (GL-10), Division Code (GL-11), and Carline Code (GL-12) of the FE Label associated with the Model Type Index (CA-25) and Carline Manufacturer Code (CA-25.1) must match at least one combination of Carline Manufacturer Code (CA-124), Division Code (CA-125) and Carline Code (CA-126) in the repeated subconfiguration sales information within that Model Type. | The combination of the Carline Manufacturer Code (GL-10), Division Code (GL-11), and Carline Code (GL-12) of the FE Label associated with the Model Type Index (CA-25) and Carline Manufacturer Code (CA-25.1) must match at least one combination of Carline Manufacturer Code (CA-124), Division Code (CA-125) and Carline Code (CA-126) in the repeated subconfiguration sales information within that Model Type. | (CA-11.5) (CA-124) (CA-125) (CA-126) (CA-25.1) (GL-10) (GL-11) (GL-12) | Active | Not Under Development |
| VERIFY-11793 | Fuel Economy | CAFE | LD-FE-CA-BR170 | Test Group (CA-34) must exist in Verify as a certified Test Group. | Test Group (CA-34) must exist in Verify as a certified Test Group. | (CA-34) | Active | Not Under Development |
| VERIFY-11794 | Fuel Economy | CAFE | LD-FE-CA-BR171 | Each Base Level must contain at least one configuration with a Configuration Index (CA-26) between 1 and 499 (inclusive), indicating that it is a 'tested' configuration. | Each Base Level must contain at least one configuration with a Configuration Index (CA-26) between 1 and 499 (inclusive), indicating that it is a 'tested' configuration. | (CA-26) | Active | Not Under Development |
| VERIFY-11795 | Fuel Economy | CAFE | LD-FE-CA-BR172 | If a Configuration Index (CA-26) is between 1 and 499 (inclusive) indicating that it is a 'tested' configuration, then that configuration must contain at least one subconfiguration with a Subconfiguration Index (CA-29.5) between 1 and 49 (inclusive) indicating that it is a 'tested' subconfiguration. | If a Configuration Index (CA-26) is between 1 and 499 (inclusive) indicating that it is a 'tested' configuration, then that configuration must contain at least one subconfiguration with a Subconfiguration Index (CA-29.5) between 1 and 49 (inclusive) indicating that it is a 'tested' subconfiguration. | (CA-29.5) | Active | Not Under Development |
| VERIFY-11796 | Fuel Economy | CAFE | LD-FE-CA-BR173 | If a Configuration Index (CA-26) is between 500 and 999 (inclusive) indicating that it is an 'untested' configuration, then all subconfigurations contained within that configuration must have a Subconfiguration Index (CA-29.5) between 50 and 99 (inclusive) indicating that they are 'untested' subconfigurations. | If a Configuration Index (CA-26) is between 500 and 999 (inclusive) indicating that it is an 'untested' configuration, then all subconfigurations contained within that configuration must have a Subconfiguration Index (CA-29.5) between 50 and 99 (inclusive) indicating that they are 'untested' subconfigurations. | (CA-29.5) | Active | Not Under Development |
| VERIFY-11797 | Fuel Economy | CAFE | LD-FE-CA-BR174 | The same Test Number (CA-35) may not be used multiple times within a subconfiguration. | The same Test Number (CA-35) may not be used multiple times within a subconfiguration. | (CA-35) | Active | Not Under Development |
| VERIFY-11798 | Fuel Economy | CAFE | LD-FE-CA-BR175 | If Test Number (CA-35) is present, then the associated test must have a Verify-calculated Rounded Adjusted Fuel Economy (RAFE) value. This test must be re-submitted to the Test Information module so that it can be calculated. | If Test Number (CA-35) is present, then the associated test must have a Verify-calculated Rounded Adjusted Fuel Economy (RAFE) value. This test must be re-submitted to the Test Information module so that it can be calculated. | (CA-35) | Active | Not Under Development |
| VERIFY-11801 | Fuel Economy | CAFE | LD-FE-CA-BR178 | Each test within a subconfiguration must have the same Averaging Method (CA-40). | Each test within a subconfiguration must have the same Averaging Method (CA-40). | (CA-40) | Active | Not Under Development |
| VERIFY-11802 | Fuel Economy | CAFE | LD-FE-CA-BR179 | If Averaging Method (CA-40) is equal to 'N' (No averaging), then Averaging Weighting Factor (CA-42) is not allowed. | If Averaging Method (CA-40) is equal to 'N' (No averaging), then Averaging Weighting Factor (CA-42) is not allowed. | (CA-42) | Active | Not Under Development |
| VERIFY-11803 | Fuel Economy | CAFE | LD-FE-CA-BR180 | If Averaging Method (CA-40) is not equal to 'N' (No averaging), meaning that averaging is used, then Averaging Group Indicator (CA-41) is required, otherwise it is optional. | If Averaging Method (CA-40) is not equal to 'N' (No averaging), meaning that averaging is used, then Averaging Group Indicator (CA-41) is required, otherwise it is optional. | (CA-41) | Active | Not Under Development |
| VERIFY-11804 | Fuel Economy | CAFE | LD-FE-CA-BR181 | Within a Subconfiguration, if Averaging Method (CA-40) is not equal to 'N' (No averaging), meaning that averaging is used, then all tests that have the same combination of Vehicle ID (TI-4), Vehicle Configuration Number (TI-5), and Averaging Group Indicator (CA-41) must have the same Averaging Weighting Factor (CA-42). | Within a Subconfiguration, if Averaging Method (CA-40) is not equal to 'N' (No averaging), meaning that averaging is used, then all tests that have the same combination of Vehicle ID (TI-4), Vehicle Configuration Number (TI-5), and Averaging Group Indicator (CA-41) must have the same Averaging Weighting Factor (CA-42). | (CA-41) (CA-42) (TI-4) (TI-5) | Active | Not Under Development |
| VERIFY-11805 | Fuel Economy | CAFE | LD-FE-CA-BR182 | Within a Subconfiguration, if Averaging Method (CA-40) is not equal to 'N' (No averaging), meaning that averaging is used, then all tests that have the same Averaging Group Indicator (CA-41) and unique combinations of Vehicle ID (TI-4) and Vehicle Configuration Number (TI-5) must have Averaging Weighting Factors (CA-42) that add up to exactly 1.00. | Within a Subconfiguration, if Averaging Method (CA-40) is not equal to 'N' (No averaging), meaning that averaging is used, then all tests that have the same Averaging Group Indicator (CA-41) and unique combinations of Vehicle ID (TI-4) and Vehicle Configuration Number (TI-5) must have Averaging Weighting Factors (CA-42) that add up to exactly 1.00. | (CA-41) (CA-42) (TI-4) (TI-5) | Active | Not Under Development |
| VERIFY-11807 | Fuel Economy | CAFE | LD-FE-CA-BR184 | If the Manufacturer Code of the owner of the Test Number (CA-35) is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the Test Number. | If the Manufacturer Code of the owner of the Test Number (CA-35) is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the Test Number. | (CA-35) | Active | Not Under Development |
| VERIFY-11809 | Fuel Economy | CAFE | LD-FE-CA-BR186 | If the Total Road Load Horsepower (CA-30) is not equal to the tested vehicle's EPA-Calculated Total Road Load Horsepower (VI-43.5), or the Equivalent Test Weight (ETW) (CA-31) is not equal to the tested vehicle's ETW (VI-30), or the Axle Ratio (CA-29) is not equal to the tested vehicle's Axle Ratio (VI-35), then either the Data Substitution Indicator (CA-39) must be equal to 'Y' (Yes), or the Analytically-Derived FE / CREE Indicator (TI-13.5) of the Test Number (CA-35) must be equal to 'Y' (Yes), or both. | If the Total Road Load Horsepower (CA-30) is not equal to the tested vehicle's EPA-Calculated Total Road Load Horsepower (VI-43.5), or the Equivalent Test Weight (ETW) (CA-31) is not equal to the tested vehicle's ETW (VI-30), or the Axle Ratio (CA-29) is not equal to the tested vehicle's Axle Ratio (VI-35), then either the Data Substitution Indicator (CA-39) must be equal to 'Y' (Yes), or the Analytically-Derived FE / CREE Indicator (TI-13.5) of the Test Number (CA-35) must be equal to 'Y' (Yes), or both. | (CA-39) | Active | Not Under Development |
| VERIFY-11810 | Fuel Economy | CAFE | LD-FE-CA-BR187 | If Equivalent Test Weight (ETW) (CA-31) is equal to '1000' or '1125', then Inertia Weight Class (CA-25.6) must be equal to '1000'. | If Equivalent Test Weight (ETW) (CA-31) is equal to '1000' or '1125', then Inertia Weight Class (CA-25.6) must be equal to '1000'. | (CA-25.6) | Active | Not Under Development |
| VERIFY-11811 | Fuel Economy | CAFE | LD-FE-CA-BR188 | If Equivalent Test Weight (ETW) (CA-31) is equal to '1250' or '1375', then Inertia Weight Class (CA-25.6) must be equal to '1250'. | If Equivalent Test Weight (ETW) (CA-31) is equal to '1250' or '1375', then Inertia Weight Class (CA-25.6) must be equal to '1250'. | (CA-25.6) | Active | Not Under Development |
| VERIFY-11812 | Fuel Economy | CAFE | LD-FE-CA-BR189 | If Equivalent Test Weight (ETW) (CA-31) is equal to '1500' or '1625', then Inertia Weight Class (CA-25.6) must be equal to '1500'. | If Equivalent Test Weight (ETW) (CA-31) is equal to '1500' or '1625', then Inertia Weight Class (CA-25.6) must be equal to '1500'. | (CA-25.6) | Active | Not Under Development |
| VERIFY-11813 | Fuel Economy | CAFE | LD-FE-CA-BR190 | If Equivalent Test Weight (ETW) (CA-31) is equal to '1750' or '1875', then Inertia Weight Class (CA-25.6) must be equal to '1750'. | If Equivalent Test Weight (ETW) (CA-31) is equal to '1750' or '1875', then Inertia Weight Class (CA-25.6) must be equal to '1750'. | (CA-25.6) | Active | Not Under Development |
| VERIFY-11814 | Fuel Economy | CAFE | LD-FE-CA-BR191 | If Equivalent Test Weight (ETW) (CA-31) is equal to '2000' or '2125', then Inertia Weight Class (CA-25.6) must be equal to '2000'. | If Equivalent Test Weight (ETW) (CA-31) is equal to '2000' or '2125', then Inertia Weight Class (CA-25.6) must be equal to '2000'. | (CA-25.6) | Active | Not Under Development |
| VERIFY-11815 | Fuel Economy | CAFE | LD-FE-CA-BR192 | If Equivalent Test Weight (ETW) (CA-31) is equal to '2250' or '2375', then Inertia Weight Class (CA-25.6) must be equal to '2250'. | If Equivalent Test Weight (ETW) (CA-31) is equal to '2250' or '2375', then Inertia Weight Class (CA-25.6) must be equal to '2250'. | (CA-25.6) | Active | Not Under Development |
| VERIFY-11816 | Fuel Economy | CAFE | LD-FE-CA-BR193 | If Equivalent Test Weight (ETW) (CA-31) is equal to '2500' or '2625', then Inertia Weight Class (CA-25.6) must be equal to '2500'. | If Equivalent Test Weight (ETW) (CA-31) is equal to '2500' or '2625', then Inertia Weight Class (CA-25.6) must be equal to '2500'. | (CA-25.6) | Active | Not Under Development |
| VERIFY-11817 | Fuel Economy | CAFE | LD-FE-CA-BR194 | If Equivalent Test Weight (ETW) (CA-31) is equal to '2750' or '2875', then Inertia Weight Class (CA-25.6) must be equal to '2750'. | If Equivalent Test Weight (ETW) (CA-31) is equal to '2750' or '2875', then Inertia Weight Class (CA-25.6) must be equal to '2750'. | (CA-25.6) | Active | Not Under Development |
| VERIFY-11818 | Fuel Economy | CAFE | LD-FE-CA-BR195 | If Equivalent Test Weight (ETW) (CA-31) is equal to '3000', '3125', or '3250', then Inertia Weight Class (CA-25.6) must be equal to '3000'. | If Equivalent Test Weight (ETW) (CA-31) is equal to '3000', '3125', or '3250', then Inertia Weight Class (CA-25.6) must be equal to '3000'. | (CA-25.6) | Active | Not Under Development |
| VERIFY-11819 | Fuel Economy | CAFE | LD-FE-CA-BR196 | If Equivalent Test Weight (ETW) (CA-31) is equal to '3375', '3500', '3625', or '3750', then Inertia Weight Class (CA-25.6) must be equal to '3500'. | If Equivalent Test Weight (ETW) (CA-31) is equal to '3375', '3500', '3625', or '3750', then Inertia Weight Class (CA-25.6) must be equal to '3500'. | (CA-25.6) | Active | Not Under Development |
| VERIFY-11820 | Fuel Economy | CAFE | LD-FE-CA-BR197 | If Equivalent Test Weight (ETW) (CA-31) is equal to '3875', '4000' or '4250', then Inertia Weight Class (CA-25.6) must be equal to '4000'. | If Equivalent Test Weight (ETW) (CA-31) is equal to '3875', '4000' or '4250', then Inertia Weight Class (CA-25.6) must be equal to '4000'. | (CA-25.6) | Active | Not Under Development |
| VERIFY-11821 | Fuel Economy | CAFE | LD-FE-CA-BR198 | If Equivalent Test Weight (ETW) (CA-31) is equal to '4500 or 4750', then Inertia Weight Class (CA-25.6) must be equal to '4500'. | If Equivalent Test Weight (ETW) (CA-31) is equal to '4500 or 4750', then Inertia Weight Class (CA-25.6) must be equal to '4500'. | (CA-25.6) | Active | Not Under Development |
| VERIFY-11822 | Fuel Economy | CAFE | LD-FE-CA-BR199 | If Equivalent Test Weight (ETW) (CA-31) is equal to '5000' or '5250', then Inertia Weight Class (CA-25.6) must be equal to '5000'. | If Equivalent Test Weight (ETW) (CA-31) is equal to '5000' or '5250', then Inertia Weight Class (CA-25.6) must be equal to '5000'. | (CA-25.6) | Active | Not Under Development |
| VERIFY-11823 | Fuel Economy | CAFE | LD-FE-CA-BR200 | If Equivalent Test Weight (ETW) (CA-31) is greater than or equal to '5500', then Inertia Weight Class (CA-25.6) must be equal to Equivalent Test Weight (ETW) (CA-31). | If Equivalent Test Weight (ETW) (CA-31) is greater than or equal to '5500', then Inertia Weight Class (CA-25.6) must be equal to Equivalent Test Weight (ETW) (CA-31). | (CA-25.6) (CA-31) | Active | Not Under Development |
| VERIFY-11824 | Fuel Economy | CAFE | LD-FE-CA-BR201 | If the Manufacturer Code of the owner of the Test Group (CA-34) is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the Test Group. | If the Manufacturer Code of the owner of the Test Group (CA-34) is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the Test Group. | (CA-34) | Active | Not Under Development |
| VERIFY-11825 | Fuel Economy | CAFE | LD-FE-CA-BR202 | The combination of Carline Manufacturer Code (CA-124), Division Code (CA-125), Carline Code (CA-126), Transmission Type (GL-67), Transmission Lockup (GL-69), Transmission Creeper Gear (GL-70), Total Number of Transmission Gears (GL-71), and Drive System (GL-72) must exist as a certified model in the Test Group dataset (TG) for the Test Group (CA-34). | The combination of Carline Manufacturer Code (CA-124), Division Code (CA-125), Carline Code (CA-126), Transmission Type (GL-67), Transmission Lockup (GL-69), Transmission Creeper Gear (GL-70), Total Number of Transmission Gears (GL-71), and Drive System (GL-72) must exist as a certified model in the Test Group dataset (TG) for the Test Group (CA-34). | (CA-34) (CA-124) (CA-125) (CA-126) (GL-67) (GL-69) (GL-70) (GL-71) (GL-72) | Active | Not Under Development |
| VERIFY-11885 | Fuel Economy | CAFE | LD-FE-CA-BR203 | If the label associated with the Model Type Index (CA-25) has an Engine Configuration Number (GL-25) provided, then the Displacement (VI-22) (rounded to a tenth) of the Test Vehicle associated with the Test Number (CA-35), must be the same as the label Engine Displacement (GL-26) (rounded to a tenth) associated with the Model Type Index (CA-25). | If the label associated with the Model Type Index (CA-25) has an Engine Configuration Number (GL-25) provided, then the Displacement (VI-22) (rounded to a tenth) of the Test Vehicle associated with the Test Number (CA-35), must be the same as the label Engine Displacement (GL-26) (rounded to a tenth) associated with the Model Type Index (CA-25). | (CA-25) (CA-35) (GL-26) (VI-22) | Active | Not Under Development |
| VERIFY-12182 | Fuel Economy | CAFE | LD-FE-CA-BR204 | If the label associated with the Model Type Index (CA-25) has an Engine Configuration Number (GL-25) provided, then the Air Aspiration Method (VI-23) of the Test Vehicle associated with the Test Number (CA-35), must be the same as the label Air Aspiration Method (GL-35) associated with the Model Type Index (CA-25). | If the label associated with the Model Type Index (CA-25) has an Engine Configuration Number (GL-25) provided, then the Air Aspiration Method (VI-23) of the Test Vehicle associated with the Test Number (CA-35), must be the same as the label Air Aspiration Method (GL-35) associated with the Model Type Index (CA-25). | (CA-25) (CA-35) (GL-35) (VI-23) | Active | Not Under Development |
| VERIFY-12183 | Fuel Economy | CAFE | LD-FE-CA-BR205 | If CAFE Standard Type (CA-10) is equal to 'R' (Reformed CAFE) and CAFE/GHG Compliance Category (CA-4) is equal to 'PV' (Passenger Vehicles), then Manufacturer Calculated Unrounded Reformed Domestic Passenger Vehicle CAFE Standard (CA-199) is required, otherwise it is not allowed. | If CAFE Standard Type (CA-10) is equal to 'R' (Reformed CAFE) and CAFE/GHG Compliance Category (CA-4) is equal to 'PV' (Passenger Vehicles), then Manufacturer Calculated Unrounded Reformed Domestic Passenger Vehicle CAFE Standard (CA-199) is required, otherwise it is not allowed. | (CA-199) | Active | Not Under Development |
| VERIFY-12184 | Fuel Economy | CAFE | LD-FE-CA-BR206 | If CAFE Standard Type (CA-10) is equal to 'R' (Reformed CAFE) and CAFE/GHG Compliance Category (CA-4) is equal to 'PV' (Passenger Vehicles), then Manufacturer Calculated Unrounded Reformed Import Passenger Vehicle CAFE Standard (CA-203) is required, otherwise it is not allowed. | If CAFE Standard Type (CA-10) is equal to 'R' (Reformed CAFE) and CAFE/GHG Compliance Category (CA-4) is equal to 'PV' (Passenger Vehicles), then Manufacturer Calculated Unrounded Reformed Import Passenger Vehicle CAFE Standard (CA-203) is required, otherwise it is not allowed. | (CA-203) | Active | Not Under Development |
| VERIFY-12194 | Fuel Economy | CAFE | LD-FE-CA-BR207 | If the Manufacturer Code (CA-124) of the owner of the Subconfiguration Carline is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the Carline. | If the Manufacturer Code (CA-124) of the owner of the Subconfiguration Carline is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the Carline. | (CA-124) | Active | Not Under Development |
| VERIFY-12392 | Fuel Economy | CAFE | LD-FE-CA-BR208 | The combination of Carline Manufacturer Code (CA-11.5), Division Code (CA-12), and Carline Code (CA-13) of a CAFE Footprint must match the Carline Manufacturer Code (GL-10), Division Code (GL-11), and Carline Code (GL-12) of an FE Label associated with a Model Type Index (CA-25) and Carline Manufacturer Code (CA-25.1) in the CAFE submission. | The combination of Carline Manufacturer Code (CA-11.5), Division Code (CA-12), and Carline Code (CA-13) of a CAFE Footprint must match the Carline Manufacturer Code (GL-10), Division Code (GL-11), and Carline Code (GL-12) of an FE Label associated with a Model Type Index (CA-25) and Carline Manufacturer Code (CA-25.1) in the CAFE submission. | (CA-11.5) (CA-12) (CA-13) (CA-25) (CA-25.1) (GL-10) (GL-11) (GL-12) | Active | Not Under Development |
| VERIFY-12870 | Fuel Economy | CAFE | LD-FE-CA-BR209 | If Test Number (CA-35) is present and the Model Year (CA-1) of the CAFE submission is greater than or equal to 2012, then the associated test must have a Verify-calculated Rounded Adjusted CREE (TI-19.4) value. This test must be re-submitted to the Test Information module so that it can be calculated. | If Test Number (CA-35) is present and the Model Year (CA-1) of the CAFE submission is greater than or equal to 2012, then the associated test must have a Verify-calculated Rounded Adjusted CREE (TI-19.4) value. This test must be re-submitted to the Test Information module so that it can be calculated. | (TI-19.4) | Active | Not Under Development |
| VERIFY-14844 | Fuel Economy | CAFE | LD-FE-CA-BR210 | If the Analytically-Derived FE / CREE Indicator (TI-13.5) of the Test Number (CA-35) is equal to 'N' (No) and at least one of the following is true: 1) Total Road Load Horsepower (CA-30) is greater than the tested vehicle's EPA-Calculated Total Road Load Horsepower (VI-43.5), or 2) Equivalent Test Weight (ETW) (CA-31) is greater than the tested vehicle's ETW (VI-30), or 3) Axle Ratio (CA-29) is greater than the tested vehicle's Axle Ratio (VI-35), then N/V Ratio (CA-228) is required. Otherwise, it is optional. |
If the Analytically-Derived FE / CREE Indicator (TI-13.5) of the Test Number (CA-35) is equal to 'N' (No) and at least one of the following is true: 1) Total Road Load Horsepower (CA-30) is greater than the tested vehicle's EPA-Calculated Total Road Load Horsepower (VI-43.5), or 2) Equivalent Test Weight (ETW) (CA-31) is greater than the tested vehicle's ETW (VI-30), or 3) Axle Ratio (CA-29) is greater than the tested vehicle's Axle Ratio (VI-35), then N/V Ratio (CA-228) is required. Otherwise, it is optional. |
(CA-228) | Active | Not Under Development |
| VERIFY-14869 | Fuel Economy | CAFE | LD-FE-CA-BR211 | The Official Manufacturer Contact (CA-227) must exist in Verify and must be assigned to the 'Light-Duty Vehicle & Truck' industry and the 'Fuel Economy - CAFE' compliance program. | The Official Manufacturer Contact (CA-227) must exist in Verify and must be assigned to the 'Light-Duty Vehicle & Truck' industry and the 'Fuel Economy - CAFE' compliance program. | (CA-227) | Active | Not Under Development |
| VERIFY-14875 | Fuel Economy | CAFE | LD-FE-CA-BR212 | The Manufacturer Code of the Submission Author Details must match the Manufacturer Code (CA-0) of the dataset for which the final status is being updated. | The Manufacturer Code of the Submission Author Details must match the Manufacturer Code (CA-0) of the dataset for which the final status is being updated. | (CA-0) | Active | Not Under Development |
| VERIFY-14871 | Fuel Economy | CAFE | LD-FE-CA-BR213 | If CAFE/GHG Final Status Indicator (CA-4.5) equals 'Y' (Yes), then the CAFE submission in Verify with the same CAFE/GHG Compliance Category (CA-4), Manufacturer Code (CA-0), and Model Year (CA-1) must have all EPA calculations successfully completed. | If CAFE/GHG Final Status Indicator (CA-4.5) equals 'Y' (Yes), then the CAFE submission in Verify with the same CAFE/GHG Compliance Category (CA-4), Manufacturer Code (CA-0), and Model Year (CA-1) must have all EPA calculations successfully completed. | (CA-0) (CA-1) (CA-4) | Active | Not Under Development |
| VERIFY-14872 | Fuel Economy | CAFE | LD-FE-CA-BR214 | If CAFE/GHG Final Status Indicator (CA-4.5) equals 'Y' (Yes), then Model Year (CA-1) must be 2012 or later. | If CAFE/GHG Final Status Indicator (CA-4.5) equals 'Y' (Yes), then Model Year (CA-1) must be 2012 or later. | (CA-1) | Active | Not Under Development |
| VERIFY-14876 | Fuel Economy | CAFE | LD-FE-CA-BR215 | If CAFE/GHG Final Status Indicator (CA-4.5) equals 'Y' (Yes), then a CAFE submission must exist in the system with the same CAFE/GHG Compliance Category (CA-4), Manufacturer Code (CA-0), and Model Year (CA-1). | If CAFE/GHG Final Status Indicator (CA-4.5) equals 'Y' (Yes), then a CAFE submission must exist in the system with the same CAFE/GHG Compliance Category (CA-4), Manufacturer Code (CA-0), and Model Year (CA-1). | (CA-0) (CA-1) (CA-4) | Active | Not Under Development |
| VERIFY-14964 | Fuel Economy | CAFE | LD-FE-CA-BR216 | If Process Code (CA-3) equals 'N' (New) or 'C' (Correction), then Model Year (CA-1) must be 2012 or later. | If Process Code (CA-3) equals 'N' (New) or 'C' (Correction), then Model Year (CA-1) must be 2012 or later. | (CA-1) | Active | Not Under Development |
| VERIFY-4827 | Fuel Economy | FE Label | LD-FE-GL-BR001a | If Process Code (GL-0.5) equals 'R' (Report) or 'C' (Correction), then a record must already exist in the system with the same Model Type Index (GL-1), Manufacturer Code (GL-2), and Model Year (GL-3). | If Process Code (GL-0.5) equals 'R' (Report) or 'C' (Correction), then a record must already exist in the system with the same Model Type Index (GL-1), Manufacturer Code (GL-2), and Model Year (GL-3). | (GL-1) (GL-2) (GL-3) | Active | Not Under Development |
| VERIFY-4609 | Fuel Economy | FE Label | LD-FE-GL-BR001b | If Process Code (GL-0.5) equals 'R' (Report) or 'C' (Correction), then a record must already exist in the system with the same Model Type Index (GL-1), Manufacturer Code (GL-2), and Model Year (GL-3). | If Process Code (GL-0.5) equals 'R' (Report) or 'C' (Correction), then a record must already exist in the system with the same Model Type Index (GL-1), Manufacturer Code (GL-2), and Model Year (GL-3). | (GL-1) (GL-2) (GL-3) | Active | Not Under Development |
| VERIFY-4792 | Fuel Economy | FE Label | LD-FE-GL-BR002 | If Process Code (GL-0.5) equals 'N' (New), then a record must not exist in the system with the same Model Type Index (GL-1), Manufacturer Code (GL-2), and Model Year (GL-3). | If Process Code (GL-0.5) equals 'N' (New), then a record must not exist in the system with the same Model Type Index (GL-1), Manufacturer Code (GL-2), and Model Year (GL-3). | (GL-1) (GL-2) (GL-3) | Active | Not Under Development |
| VERIFY-4574 | Fuel Economy | FE Label | LD-FE-GL-BR003 | The Submitter's Manufacturer Code (in Submission Author Details) must match the Carline Manufacturer Code (GL-10). | The Submitter's Manufacturer Code (in Submission Author Details) must match the Carline Manufacturer Code (GL-10). | (GL-10) | Active | Not Under Development |
| VERIFY-4662 | Fuel Economy | FE Label | LD-FE-GL-BR004 | The combination of Model Year (GL-3), Carline Manufacturer Code (GL-10), Division Code (GL-11) and Carline Code (GL-12) must exist in the system as a certified model. | The combination of Model Year (GL-3), Carline Manufacturer Code (GL-10), Division Code (GL-11) and Carline Code (GL-12) must exist in the system as a certified model. | (GL-3) (GL-10) (GL-11) (GL-12) | Active | Not Under Development |
| VERIFY-4860 | Fuel Economy | FE Label | LD-FE-GL-BR005 | If Process Code (GL-0.5) is equal to 'C' (Correction), then Manufacturer FE Label Comments (GL-4) is required; otherwise, it is optional. | If Process Code (GL-0.5) is equal to 'C' (Correction), then Manufacturer FE Label Comments (GL-4) is required; otherwise, it is optional. | (GL-4) | Active | Not Under Development |
| VERIFY-4746 | Fuel Economy | FE Label | LD-FE-GL-BR006 | The combination of Test Group (GL-13.5) and Engine Configuration (GL-25), if provided, must exist in the system as Test Group Information. | The combination of Test Group (GL-13.5) and Engine Configuration (GL-25), if provided, must exist in the system as Test Group Information. | (GL-13.5) (GL-25) | Active | Not Under Development |
| VERIFY-4723 | Fuel Economy | FE Label | LD-FE-GL-BR008 | Shift Indicator Light (GL-74) can only be equal to 'Y' (Yes) when Transmission Type (GL-67) is equal to 'M' (Manual), 'AM' (Automated Manual) or 'OT' (Other). | Shift Indicator Light (GL-74) can only be equal to 'Y' (Yes) when Transmission Type (GL-67) is equal to 'M' (Manual), 'AM' (Automated Manual) or 'OT' (Other). | (GL-74) | Active | Not Under Development |
| VERIFY-4717 | Fuel Economy | FE Label | LD-FE-GL-BR009 | If Fuel Economy Label Calculation Approach (GL-79) is equal to 'EV' (Electric Vehicle label), then Drive Source (TG-7) must equal 'E' (Electric motor). | If Fuel Economy Label Calculation Approach (GL-79) is equal to 'EV' (Electric Vehicle label), then Drive Source (TG-7) must equal 'E' (Electric motor). | (TG-7) | Active | Not Under Development |
| VERIFY-4797 | Fuel Economy | FE Label | LD-FE-GL-BR011 | If Process Code (GL-0.5) is equal to 'N' (New), then Label Recalculation (GL-87) must equal 'N' (No), if present. | If Process Code (GL-0.5) is equal to 'N' (New), then Label Recalculation (GL-87) must equal 'N' (No), if present. | (GL-87) | Active | Not Under Development |
| VERIFY-4705 | Fuel Economy | FE Label | LD-FE-GL-BR012 | If Process Code (GL-0.5) is equal to 'C' (Correction), then Label Recalculation (GL-87) is required. | If Process Code (GL-0.5) is equal to 'C' (Correction), then Label Recalculation (GL-87) is required. | (GL-87) | Active | Not Under Development |
| VERIFY-4801 | Fuel Economy | FE Label | LD-FE-GL-BR013 | If Process Code (GL-0.5) is equal to 'N' (New), then Re-label (GL-88) must not be present. | If Process Code (GL-0.5) is equal to 'N' (New), then Re-label (GL-88) must not be present. | (GL-88) | Active | Not Under Development |
| VERIFY-4745 | Fuel Economy | FE Label | LD-FE-GL-BR014 | If Label Recalculation (GL-87) is equal to 'Y' (Yes), then Re-label (GL-88) is required; otherwise, it must not be present. | If Label Recalculation (GL-87) is equal to 'Y' (Yes), then Re-label (GL-88) is required; otherwise, it must not be present. | (GL-88) | Active | Not Under Development |
| VERIFY-4807 | Fuel Economy | FE Label | LD-FE-GL-BR015 | Only one Fuel Usage (GL-89) can begin with 'G' (for Gasoline). | Only one Fuel Usage (GL-89) can begin with 'G' (for Gasoline). | (GL-89) | Active | Not Under Development |
| VERIFY-4831 | Fuel Economy | FE Label | LD-FE-GL-BR016 | Only one Fuel Usage (GL-89) can begin with 'D' (for Diesel). | Only one Fuel Usage (GL-89) can begin with 'D' (for Diesel). | (GL-89) | Active | Not Under Development |
| VERIFY-4870 | Fuel Economy | FE Label | LD-FE-GL-BR029 | If Fuel Usage (GL-89) is equal to 'E' (Ethanol) or one of the Fuel Usage Types that begins with 'G' (Gasoline), then Maximum Ethanol Percentage (GL-104) is required; otherwise, it is not allowed. | If Fuel Usage (GL-89) is equal to 'E' (Ethanol) or one of the Fuel Usage Types that begins with 'G' (Gasoline), then Maximum Ethanol Percentage (GL-104) is required; otherwise, it is not allowed. | (GL-104) | Active | Not Under Development |
| VERIFY-4919 | Fuel Economy | FE Label | LD-FE-GL-BR030 | If Fuel Usage (GL-89) is equal to 'DU' (Diesel, ultra low sulfur (15 ppm maximum)), then Maximum Bio-diesel Percentage (GL-105) is required; otherwise, it is not allowed. | If Fuel Usage (GL-89) is equal to 'DU' (Diesel, ultra low sulfur (15 ppm maximum)), then Maximum Bio-diesel Percentage (GL-105) is required; otherwise, it is not allowed. | (GL-105) | Active | Not Under Development |
| VERIFY-4596 | Fuel Economy | FE Label | LD-FE-GL-BR034 | Test Group (GL-126) must exist in the system with the same Model Year (TG-6) as the Model Year (GL-3) of the submission. | Test Group (GL-126) must exist in the system with the same Model Year (TG-6) as the Model Year (GL-3) of the submission. | (GL-3) (GL-126) | Active | Not Under Development |
| VERIFY-4781 | Fuel Economy | FE Label | LD-FE-GL-BR035 | Test Number (GL-127) must exist in Test Information (TI-1). | Test Number (GL-127) must exist in Test Information (TI-1). | (GL-127) | Active | Not Under Development |
| VERIFY-4802 | Fuel Economy | FE Label | LD-FE-GL-BR036a | If Subconfiguration Index (GL-121) is between 1 and 49 (inclusive) indicating that it is a 'tested' subconfiguration, then Test Number (GL-127) is required, otherwise it is not allowed. | If Subconfiguration Index (GL-121) is between 1 and 49 (inclusive) indicating that it is a 'tested' subconfiguration, then Test Number (GL-127) is required, otherwise it is not allowed. | (GL-127) | Active | Not Under Development |
| VERIFY-4823 | Fuel Economy | FE Label | LD-FE-GL-BR036b | If Subconfiguration Index (GL-121) is between 1 and 49 (inclusive) indicating that it is a 'tested' subconfiguration, then Test Number (GL-127) is required, otherwise it is not allowed. | If Subconfiguration Index (GL-121) is between 1 and 49 (inclusive) indicating that it is a 'tested' subconfiguration, then Test Number (GL-127) is required, otherwise it is not allowed. | (GL-127) | Active | Not Under Development |
| VERIFY-4794 | Fuel Economy | FE Label | LD-FE-GL-BR037 | The Test Category (TI-43) for this Test Number (GL-127) must be equal to 'FTP' (Test Procedure equal to '2', '11', '21', '25', '31', '35', '41', '45', '51', '52'), 'US06' (Test Procedure equal to '16', '90', '96'), 'SC03' (Test Procedure equal to '95'), 'HWY' (Test Procedure equal to '3'), or 'CD' (Test Procedure equal to '81', '83', '84', '85', '86'). | The Test Category (TI-43) for this Test Number (GL-127) must be equal to 'FTP' (Test Procedure equal to '2', '11', '21', '25', '31', '35', '41', '45', '51', '52'), 'US06' (Test Procedure equal to '16', '90', '96'), 'SC03' (Test Procedure equal to '95'), 'HWY' (Test Procedure equal to '3'), or 'CD' (Test Procedure equal to '81', '83', '84', '85', '86'). | (TI-43) (GL-127) | Active | Not Under Development |
| VERIFY-4897 | Fuel Economy | FE Label | LD-FE-GL-BR038 | If Averaging Method (GL-133) is equal to 'N' (No averaging), then Averaging Group Indicator (GL-134) must not be present. | If Averaging Method (GL-133) is equal to 'N' (No averaging), then Averaging Group Indicator (GL-134) must not be present. | (GL-134) | Active | Not Under Development |
| VERIFY-4667 | Fuel Economy | FE Label | LD-FE-GL-BR039 | If Averaging Method (GL-133) is not equal to 'N' (No averaging), then Averaging Weighting Factor (GL-135) is required. | If Averaging Method (GL-133) is not equal to 'N' (No averaging), then Averaging Weighting Factor (GL-135) is required. | (GL-135) | Active | Not Under Development |
| VERIFY-4872 | Fuel Economy | FE Label | LD-FE-GL-BR040 | If Drive Source (GL-13.5.1) is 'C' (Combustion Engine), then Engine Configuration Number (GL-25) is required. | If Drive Source (GL-13.5.1) is 'C' (Combustion Engine), then Engine Configuration Number (GL-25) is required. | (GL-25) | Active | Not Under Development |
| VERIFY-4901 | Fuel Economy | FE Label | LD-FE-GL-BR042 | If the Process Code (GL-0.5) is equal to 'R' (Report), then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (GL-2) of the dataset for which the report was requested. | If the Process Code (GL-0.5) is equal to 'R' (Report), then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (GL-2) of the dataset for which the report was requested. | (GL-2) | Active | Not Under Development |
| VERIFY-4928 | Fuel Economy | FE Label | LD-FE-GL-BR043 | If the Process Code (GL-0.5) is equal to 'N' (New) or 'C' (Correction), then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (GL-2) of the submitted dataset. | If the Process Code (GL-0.5) is equal to 'N' (New) or 'C' (Correction), then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (GL-2) of the submitted dataset. | (GL-2) | Active | Not Under Development |
| VERIFY-4730 | Fuel Economy | FE Label | LD-FE-GL-BR044a | Manufacturer Code (GL-2) must exist in the system. | Manufacturer Code (GL-2) must exist in the system. | (GL-2) | Active | Not Under Development |
| VERIFY-4651 | Fuel Economy | FE Label | LD-FE-GL-BR044b | Manufacturer Code (GL-2) must exist in the system. | Manufacturer Code (GL-2) must exist in the system. | (GL-2) | Active | Not Under Development |
| VERIFY-4866 | Fuel Economy | FE Label | LD-FE-GL-BR045 | Carline Manufacturer Code (GL-10) must exist in the system. | Carline Manufacturer Code (GL-10) must exist in the system. | (GL-10) | Active | Not Under Development |
| VERIFY-4625 | Fuel Economy | FE Label | LD-FE-GL-BR046 | Manufacturer Division Code (GL-11) must exist in the system. | Manufacturer Division Code (GL-11) must exist in the system. | (GL-11) | Active | Not Under Development |
| VERIFY-4728 | Fuel Economy | FE Label | LD-FE-GL-BR047 | Carline Code (GL-12) must exist in the system for the Carline Manufacturer Code (GL-10), Manufacturer Division Code (GL-11), and Model Year (GL-3). | Carline Code (GL-12) must exist in the system for the Carline Manufacturer Code (GL-10), Manufacturer Division Code (GL-11), and Model Year (GL-3). | (GL-12) | Active | Not Under Development |
| VERIFY-4654 | Fuel Economy | FE Label | LD-FE-GL-BR048 | Model Type Driving Range (GL-103) must match format 'nnn' for one driving range or 'nnn/nnn' for minimum and maximum driving range. | Model Type Driving Range (GL-103) must match format 'nnn' for one driving range or 'nnn/nnn' for minimum and maximum driving range. | (GL-103) | Active | Not Under Development |
| VERIFY-4833 | Fuel Economy | FE Label | LD-FE-GL-BR049 | Base Level Fuel Usage (GL-110.5) must match a Model Type Fuel Usage (GL-89). | Base Level Fuel Usage (GL-110.5) must match a Model Type Fuel Usage (GL-89). | (GL-110.5) | Active | Not Under Development |
| VERIFY-4575 | Fuel Economy | FE Label | LD-FE-GL-BR050 | Test Group (GL-13.5) must exist in the system with the same Model Year (TG-6) as the Model Year (GL-3) of the submission. | Test Group (GL-13.5) must exist in the system with the same Model Year (TG-6) as the Model Year (GL-3) of the submission. | (GL-3) (GL-13.5) | Active | Not Under Development |
| VERIFY-4750 | Fuel Economy | FE Label | LD-FE-GL-BR051 | The Fuel Usage for this Test Number (GL-127) must be the same as one of the Fuel Usages (GL-89) for this Label. | The Fuel Usage for this Test Number (GL-127) must be the same as one of the Fuel Usages (GL-89) for this Label. | (GL-127) | Active | Not Under Development |
| VERIFY-4703 | Fuel Economy | FE Label | LD-FE-GL-BR052 | Each Base Level must have a unique Inertia Weight Class (GL-110). | Each Base Level must have a unique Inertia Weight Class (GL-110). | (GL-110) | Active | Not Under Development |
| VERIFY-4824 | Fuel Economy | FE Label | LD-FE-GL-BR053 | Each Configuration within a Base Level must have a unique Configuration Index Number (GL-117). | Each Configuration within a Base Level must have a unique Configuration Index Number (GL-117). | (GL-117) | Active | Not Under Development |
| VERIFY-4635 | Fuel Economy | FE Label | LD-FE-GL-BR054 | Each SubConfiguration within a Configuration must have a unique SubConfiguration Index Number (GL-121). | Each SubConfiguration within a Configuration must have a unique SubConfiguration Index Number (GL-121). | (GL-121) | Active | Not Under Development |
| VERIFY-4615 | Fuel Economy | FE Label | LD-FE-GL-BR055 | Each Configuration within a Base Level must be a unique combination of Engine Code (GL-119), Axle Ratio (GL-120), and Transmission Configuration Code (GL-118). | Each Configuration within a Base Level must be a unique combination of Engine Code (GL-119), Axle Ratio (GL-120), and Transmission Configuration Code (GL-118). | (GL-119) (GL-120) (GL-118) | Active | Not Under Development |
| VERIFY-4639 | Fuel Economy | FE Label | LD-FE-GL-BR056 | Each SubConfiguration within a Configuration must be a unique combination of Equivalent Test Weight (GL-123) and Road Load Horsepower (GL-122). | Each SubConfiguration within a Configuration must be a unique combination of Equivalent Test Weight (GL-123) and Road Load Horsepower (GL-122). | (GL-122) (GL-123) | Active | Not Under Development |
| VERIFY-4881 | Fuel Economy | FE Label | LD-FE-GL-BR057 | If the Manufacturer Code of the owner for the Test Number (GL-127) is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the Test Number. | If the Manufacturer Code of the owner for the Test Number (GL-127) is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the Test Number. | (GL-127) | Active | Not Under Development |
| VERIFY-4675 | Fuel Economy | FE Label | LD-FE-GL-BR058 | If Transmission Type (GL-67) is equal to 'CVT' (Continuously Variable), then Number of Transmission Gears (GL-71) must equal '1'. | If Transmission Type (GL-67) is equal to 'CVT' (Continuously Variable), then Number of Transmission Gears (GL-71) must equal '1'. | (GL-71) | Active | Not Under Development |
| VERIFY-4890 | Fuel Economy | FE Label | LD-FE-GL-BR059 | Carline Manufacturer Code (GL-125.5) must exist in the system. | Carline Manufacturer Code (GL-125.5) must exist in the system. | (GL-125.5) | Active | Not Under Development |
| VERIFY-4715 | Fuel Economy | FE Label | LD-FE-GL-BR060 | Manufacturer Division Code (GL-125.6) must exist in the system. | Manufacturer Division Code (GL-125.6) must exist in the system. | (GL-125.6) | Active | Not Under Development |
| VERIFY-4815 | Fuel Economy | FE Label | LD-FE-GL-BR061 | Carline Code (GL-125.7) must exist in the system for the Carline Manufacturer Code (GL-125.5), Manufacturer Division Code (GL-125.6), and Model Year (GL-3). | Carline Code (GL-125.7) must exist in the system for the Carline Manufacturer Code (GL-125.5), Manufacturer Division Code (GL-125.6), and Model Year (GL-3). | (GL-125.7) | Active | Not Under Development |
| VERIFY-4689 | Fuel Economy | FE Label | LD-FE-GL-BR062 | Equivalent Test Weight (GL-123) can only be one of the following values: 1000, 1125, 1250, 1375, 1500, 1625, 1750, 1875, 2000, 2125, 2250, 2375, 2500, 2625, 2750, 2875, 3000, 3125, 3250, 3375, 3500, 3625, 3750, 3875, 4000, 4250, 4500, 4750, 5000, 5250, 5500, 6000, 6500, 7000, 7500, 8000, 8500, 9000, 9500, 10000, 10500, 11000, 11500, 12000, 12500, 13000, 13500, or 14000. | Equivalent Test Weight (GL-123) can only be one of the following values: 1000, 1125, 1250, 1375, 1500, 1625, 1750, 1875, 2000, 2125, 2250, 2375, 2500, 2625, 2750, 2875, 3000, 3125, 3250, 3375, 3500, 3625, 3750, 3875, 4000, 4250, 4500, 4750, 5000, 5250, 5500, 6000, 6500, 7000, 7500, 8000, 8500, 9000, 9500, 10000, 10500, 11000, 11500, 12000, 12500, 13000, 13500, or 14000. | (GL-123) | Active | Not Under Development |
| VERIFY-4716 | Fuel Economy | FE Label | LD-FE-GL-BR063 | Inertia Weight Class (GL-110) can only be one of the following values: 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000, 3500, 4000, 4500, 5000, 5500, 6000, 6500, 7000, 7500, 8000, 8500, 9000, 9500, 10000, 10500, 11000, 11500, 12000, 12500, 13000, 13500, or 14000. | Inertia Weight Class (GL-110) can only be one of the following values: 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000, 3500, 4000, 4500, 5000, 5500, 6000, 6500, 7000, 7500, 8000, 8500, 9000, 9500, 10000, 10500, 11000, 11500, 12000, 12500, 13000, 13500, or 14000. | (GL-110) | Active | Not Under Development |
| VERIFY-4891 | Fuel Economy | FE Label | LD-FE-GL-BR064 | If Equivalent Test Weight (GL-123) is equal to '1000' or '1125', then Inertia Weight Class (GL-110) must be equal to '1000'. | If Equivalent Test Weight (GL-123) is equal to '1000' or '1125', then Inertia Weight Class (GL-110) must be equal to '1000'. | (GL-110) | Active | Not Under Development |
| VERIFY-4713 | Fuel Economy | FE Label | LD-FE-GL-BR065 | If Equivalent Test Weight (GL-123) is equal to '1250' or '1375', then Inertia Weight Class (GL-110) must be equal to '1250'. | If Equivalent Test Weight (GL-123) is equal to '1250' or '1375', then Inertia Weight Class (GL-110) must be equal to '1250'. | (GL-110) | Active | Not Under Development |
| VERIFY-4756 | Fuel Economy | FE Label | LD-FE-GL-BR066 | If Equivalent Test Weight (GL-123) is equal to '1500' or '1625', then Inertia Weight Class (GL-110) must be equal to '1500'. | If Equivalent Test Weight (GL-123) is equal to '1500' or '1625', then Inertia Weight Class (GL-110) must be equal to '1500'. | (GL-110) | Active | Not Under Development |
| VERIFY-4894 | Fuel Economy | FE Label | LD-FE-GL-BR067 | If Equivalent Test Weight (GL-123) is equal to '1750' or '1875', then Inertia Weight Class (GL-110) must be equal to '1750'. | If Equivalent Test Weight (GL-123) is equal to '1750' or '1875', then Inertia Weight Class (GL-110) must be equal to '1750'. | (GL-110) | Active | Not Under Development |
| VERIFY-4778 | Fuel Economy | FE Label | LD-FE-GL-BR068 | If Equivalent Test Weight (GL-123) is equal to '2000' or '2125', then Inertia Weight Class (GL-110) must be equal to '2000'. | If Equivalent Test Weight (GL-123) is equal to '2000' or '2125', then Inertia Weight Class (GL-110) must be equal to '2000'. | (GL-110) | Active | Not Under Development |
| VERIFY-4916 | Fuel Economy | FE Label | LD-FE-GL-BR069 | If Equivalent Test Weight (GL-123) is equal to '2250' or '2375', then Inertia Weight Class (GL-110) must be equal to '2250'. | If Equivalent Test Weight (GL-123) is equal to '2250' or '2375', then Inertia Weight Class (GL-110) must be equal to '2250'. | (GL-110) | Active | Not Under Development |
| VERIFY-4930 | Fuel Economy | FE Label | LD-FE-GL-BR070 | If Equivalent Test Weight (GL-123) is equal to '2500' or '2625', then Inertia Weight Class (GL-110) must be equal to '2500'. | If Equivalent Test Weight (GL-123) is equal to '2500' or '2625', then Inertia Weight Class (GL-110) must be equal to '2500'. | (GL-110) | Active | Not Under Development |
| VERIFY-4913 | Fuel Economy | FE Label | LD-FE-GL-BR071 | If Equivalent Test Weight (GL-123) is equal to '2750' or '2875', then Inertia Weight Class (GL-110) must be equal to '2750'. | If Equivalent Test Weight (GL-123) is equal to '2750' or '2875', then Inertia Weight Class (GL-110) must be equal to '2750'. | (GL-110) | Active | Not Under Development |
| VERIFY-4697 | Fuel Economy | FE Label | LD-FE-GL-BR072 | If Equivalent Test Weight (GL-123) is equal to '3000', '3125', or '3250', then Inertia Weight Class (GL-110) must be equal to '3000'. | If Equivalent Test Weight (GL-123) is equal to '3000', '3125', or '3250', then Inertia Weight Class (GL-110) must be equal to '3000'. | (GL-110) | Active | Not Under Development |
| VERIFY-4910 | Fuel Economy | FE Label | LD-FE-GL-BR073 | If Equivalent Test Weight (GL-123) is equal to '3375', '3500', '3625', or '3750', then Inertia Weight Class (GL-110) must be equal to '3500'. | If Equivalent Test Weight (GL-123) is equal to '3375', '3500', '3625', or '3750', then Inertia Weight Class (GL-110) must be equal to '3500'. | (GL-110) | Active | Not Under Development |
| VERIFY-4841 | Fuel Economy | FE Label | LD-FE-GL-BR074 | If Equivalent Test Weight (GL-123) is equal to '3875', '4000' or '4250', then Inertia Weight Class (GL-110) must be equal to '4000'. | If Equivalent Test Weight (GL-123) is equal to '3875', '4000' or '4250', then Inertia Weight Class (GL-110) must be equal to '4000'. | (GL-110) | Active | Not Under Development |
| VERIFY-4766 | Fuel Economy | FE Label | LD-FE-GL-BR075 | If Equivalent Test Weight (GL-123) is equal to '4500 or 4750', then Inertia Weight Class (GL-110) must be equal to '4500'. | If Equivalent Test Weight (GL-123) is equal to '4500 or 4750', then Inertia Weight Class (GL-110) must be equal to '4500'. | (GL-110) | Active | Not Under Development |
| VERIFY-4709 | Fuel Economy | FE Label | LD-FE-GL-BR076 | If Equivalent Test Weight (GL-123) is equal to '5000' or '5250', then Inertia Weight Class (GL-110) must be equal to '5000'. | If Equivalent Test Weight (GL-123) is equal to '5000' or '5250', then Inertia Weight Class (GL-110) must be equal to '5000'. | (GL-110) | Active | Not Under Development |
| VERIFY-4862 | Fuel Economy | FE Label | LD-FE-GL-BR077 | If Equivalent Test Weight (GL-123) is greater than or equal to '5500', then Inertia Weight Class (GL-110) must be equal to Equivalent Test Weight (GL-123). | If Equivalent Test Weight (GL-123) is greater than or equal to '5500', then Inertia Weight Class (GL-110) must be equal to Equivalent Test Weight (GL-123). | (GL-123) (GL-110) | Active | Not Under Development |
| VERIFY-4671 | Fuel Economy | FE Label | LD-FE-GL-BR078 | Each Base Level must contain at least one configuration with a Configuration Index (GL-117) between 1 and 499 (inclusive), indicating that it is a 'tested' configuration. | Each Base Level must contain at least one configuration with a Configuration Index (GL-117) between 1 and 499 (inclusive), indicating that it is a 'tested' configuration. | (GL-117) | Active | Not Under Development |
| VERIFY-4626 | Fuel Economy | FE Label | LD-FE-GL-BR079 | If a SubConfiguration contains tests, then Test Number (GL-127), Data Substitution (GL-132) and Averaging Method (GL-133) are required for each test. | If a SubConfiguration contains tests, then Test Number (GL-127), Data Substitution (GL-132) and Averaging Method (GL-133) are required for each test. | (GL-132) (GL-127) (GL-133) | Active | Not Under Development |
| VERIFY-4898 | Fuel Economy | FE Label | LD-FE-GL-BR080 | If a SubConfiguration contains a Test Number (GL-127), then within that SubConfiguration, each unique combination of Vehicle ID (TI-4), Vehicle Configuration Number (TI-5), and Averaging Group Indicator (GL-134), must contain at least one test with a Test Procedure (TI-8) equal to 2, 21, 25, 31, 35, 41, or 45. Note: FTP test that is NOT a Test Procedure 11 (Cold CO test). | If a SubConfiguration contains a Test Number (GL-127), then within that SubConfiguration, each unique combination of Vehicle ID (TI-4), Vehicle Configuration Number (TI-5), and Averaging Group Indicator (GL-134), must contain at least one test with a Test Procedure (TI-8) equal to 2, 21, 25, 31, 35, 41, or 45. Note: FTP test that is NOT a Test Procedure 11 (Cold CO test). | (GL-134) (TI-4) (TI-5) (TI-8) | Active | Not Under Development |
| VERIFY-4782 | Fuel Economy | FE Label | LD-FE-GL-BR081 | If a SubConfiguration contains a Test Number (GL-127), then within that SubConfiguration, each unique combination of Vehicle ID (TI-4), Vehicle Configuration Number (TI-5), and Averaging Group Indicator (GL-134), must contain at least one test with a Test Procedure (TI-8) equal to 3 (HWFE test). | If a SubConfiguration contains a Test Number (GL-127), then within that SubConfiguration, each unique combination of Vehicle ID (TI-4), Vehicle Configuration Number (TI-5), and Averaging Group Indicator (GL-134), must contain at least one test with a Test Procedure (TI-8) equal to 3 (HWFE test). | (GL-134) (TI-4) (TI-5) (TI-8) | Active | Not Under Development |
| VERIFY-4825 | Fuel Economy | FE Label | LD-FE-GL-BR082 | If a SubConfiguration contains a Test Number (GL-127) and FE Label Calculation Approach (GL-79) is equal to '5C-VEHSPEC', then within that SubConfiguration, each unique combination of Vehicle ID (TI-4), Vehicle Configuration Number (TI-5), and Averaging Group Indicator (GL-134), must contain at least one test with a Test Procedure (TI-8) equal to 11 (Cold CO test). | If a SubConfiguration contains a Test Number (GL-127) and FE Label Calculation Approach (GL-79) is equal to '5C-VEHSPEC', then within that SubConfiguration, each unique combination of Vehicle ID (TI-4), Vehicle Configuration Number (TI-5), and Averaging Group Indicator (GL-134), must contain at least one test with a Test Procedure (TI-8) equal to 11 (Cold CO test). | (GL-134) (TI-4) (TI-5) (TI-8) | Active | Not Under Development |
| VERIFY-4657 | Fuel Economy | FE Label | LD-FE-GL-BR083 | If a SubConfiguration contains a Test Number (GL-127) and FE Label Calculation Approach (GL-79) is equal to '5C-VEHSPEC', then within that SubConfiguration, each unique combination of Vehicle ID (TI-4), Vehicle Configuration Number (TI-5), and Averaging Group Indicator (GL-134), must contain at least one test with a Test Procedure (TI-8) equal to 95 (SC03 test). | If a SubConfiguration contains a Test Number (GL-127) and FE Label Calculation Approach (GL-79) is equal to '5C-VEHSPEC', then within that SubConfiguration, each unique combination of Vehicle ID (TI-4), Vehicle Configuration Number (TI-5), and Averaging Group Indicator (GL-134), must contain at least one test with a Test Procedure (TI-8) equal to 95 (SC03 test). | (GL-134) (TI-4) (TI-5) (TI-8) | Active | Not Under Development |
| VERIFY-4577 | Fuel Economy | FE Label | LD-FE-GL-BR084 | If a SubConfiguration contains a Test Number (GL-127) and FE Label Calculation Approach (GL-79) is equal to '5C-VEHSPEC' or '5C-MOD', then within that SubConfiguration, each unique combination of Vehicle ID (TI-4), Vehicle Configuration Number (TI-5), and Averaging Group Indicator (GL-134), must contain at least one test with a Test Procedure (TI-8) equal to 90 (US06 test). | If a SubConfiguration contains a Test Number (GL-127) and FE Label Calculation Approach (GL-79) is equal to '5C-VEHSPEC' or '5C-MOD', then within that SubConfiguration, each unique combination of Vehicle ID (TI-4), Vehicle Configuration Number (TI-5), and Averaging Group Indicator (GL-134), must contain at least one test with a Test Procedure (TI-8) equal to 90 (US06 test). | (GL-134) (TI-4) (TI-5) (TI-8) | Active | Not Under Development |
| VERIFY-4686 | Fuel Economy | FE Label | LD-FE-GL-BR085 | If Averaging Method (GL-133) is equal to 'N' (No averaging), then Averaging Weighting Factor (GL-135) must not be present. | If Averaging Method (GL-133) is equal to 'N' (No averaging), then Averaging Weighting Factor (GL-135) must not be present. | (GL-135) | Active | Not Under Development |
| VERIFY-4849 | Fuel Economy | FE Label | LD-FE-GL-BR086 | If Averaging Method (GL-133) is not equal to 'N' (No averaging), meaning that averaging is used, then Averaging Group Indicator (GL-134) is required. | If Averaging Method (GL-133) is not equal to 'N' (No averaging), meaning that averaging is used, then Averaging Group Indicator (GL-134) is required. | (GL-134) | Active | Not Under Development |
| VERIFY-4672 | Fuel Economy | FE Label | LD-FE-GL-BR087 | The same Test Number (GL-127) may not be used multiple times within a SubConfiguration. | The same Test Number (GL-127) may not be used multiple times within a SubConfiguration. | (GL-127) | Active | Not Under Development |
| VERIFY-4816 | Fuel Economy | FE Label | LD-FE-GL-BR088 | Each Test within a SubConfiguration must have the same Averaging Method (GL-133). | Each Test within a SubConfiguration must have the same Averaging Method (GL-133). | (GL-133) | Active | Not Under Development |
| VERIFY-4779 | Fuel Economy | FE Label | LD-FE-GL-BR089 | A Test Averaging Method (GL-133) of 'S' (Simple Averaging) can only be used if Shift Indicator Light (GL-74) is equal to 'Y'. | A Test Averaging Method (GL-133) of 'S' (Simple Averaging) can only be used if Shift Indicator Light (GL-74) is equal to 'Y'. | (GL-133) | Active | Not Under Development |
| VERIFY-4701 | Fuel Economy | FE Label | LD-FE-GL-BR090 | Within a SubConfiguration, if Averaging Method (GL-133) is not equal to 'N' (No averaging), meaning that averaging is used, then all tests that have the same combination of Vehicle ID (TI-4), Vehicle Configuration Number (TI-5), and Averaging Group Indicator (GL-134), must have the same Averaging Weighting Factor (GL-135). | Within a SubConfiguration, if Averaging Method (GL-133) is not equal to 'N' (No averaging), meaning that averaging is used, then all tests that have the same combination of Vehicle ID (TI-4), Vehicle Configuration Number (TI-5), and Averaging Group Indicator (GL-134), must have the same Averaging Weighting Factor (GL-135). | (TI-4) (TI-5) (GL-134) (GL-135) | Active | Not Under Development |
| VERIFY-4603 | Fuel Economy | FE Label | LD-FE-GL-BR091 | Within a SubConfiguration, if Averaging Method (GL-133) is not equal to 'N' (No averaging), meaning that averaging is used, then all tests that have the same Averaging Group Indicator (GL-134) and unique combinations of Vehicle ID (TI-4) and Vehicle Configuration Number (TI-5), must have Averaging Weighting Factors (GL-135) that add up to exactly 1.00. | Within a SubConfiguration, if Averaging Method (GL-133) is not equal to 'N' (No averaging), meaning that averaging is used, then all tests that have the same Averaging Group Indicator (GL-134) and unique combinations of Vehicle ID (TI-4) and Vehicle Configuration Number (TI-5), must have Averaging Weighting Factors (GL-135) that add up to exactly 1.00. | (GL-134) (TI-4) (TI-5) (GL-135) | Active | Not Under Development |
| VERIFY-4906 | Fuel Economy | FE Label | LD-FE-GL-BR092 | (Warning only, label should be accepted) For each Label Fuel Usage (GL-89) entered for a label, at least 1 Base Level should contain a Base Level Fuel Usage (GL-110.5) with the same value. | (Warning only, label should be accepted) For each Label Fuel Usage (GL-89) entered for a label, at least 1 Base Level should contain a Base Level Fuel Usage (GL-110.5) with the same value. | (GL-110.5) | Active | Not Under Development |
| VERIFY-4618 | Fuel Economy | FE Label | LD-FE-GL-BR093 | (Warning only, label should be accepted) If the Transmission Type (GL-67) equals 'A', 'M', or 'CVT', then the vehicle used for each test entered for that label should have the same Transmission Type (VI-36). | (Warning only, label should be accepted) If the Transmission Type (GL-67) equals 'A', 'M', or 'CVT', then the vehicle used for each test entered for that label should have the same Transmission Type (VI-36). | (VI-36) (GL-67) | Active | Not Under Development |
| VERIFY-4751 | Fuel Economy | FE Label | LD-FE-GL-BR094 | (Warning only, label should still be accepted) If the Test Fuel Category (TI-44) of a test within a Base Level is 'G' (Gasoline), then one of the Base Level Fuel Usages (GL-110.5) must be equal to 'G', 'GM', 'GMR', 'GP', or 'GPR'. | (Warning only, label should still be accepted) If the Test Fuel Category (TI-44) of a test within a Base Level is 'G' (Gasoline), then one of the Base Level Fuel Usages (GL-110.5) must be equal to 'G', 'GM', 'GMR', 'GP', or 'GPR'. | (GL-110.5) | Active | Not Under Development |
| VERIFY-4712 | Fuel Economy | FE Label | LD-FE-GL-BR095 | (Warning only, label should still be accepted) If the Test Fuel Category (TI-44) of a test within a Base Level is 'D' (Diesel), then one of the Base Level Fuel Usages (GL-110.5) must be equal to 'D' or 'DU'. | (Warning only, label should still be accepted) If the Test Fuel Category (TI-44) of a test within a Base Level is 'D' (Diesel), then one of the Base Level Fuel Usages (GL-110.5) must be equal to 'D' or 'DU'. | (GL-110.5) | Active | Not Under Development |
| VERIFY-4660 | Fuel Economy | FE Label | LD-FE-GL-BR096 | (Warning only, label should still be accepted) If the Test Fuel Category (TI-44) of a test within a Base Level is 'M' (Methanol), 'E' (Ethanol), 'CNG' (Compressed Natural Gas), 'LPG' (Liquid Petroleum Gas), 'LNG' (Liquified Natural Gas), or 'H' (Hydrogen), then the Test Fuel Category must be equal to one of the Base Level Fuel Usages (GL-110.5). | (Warning only, label should still be accepted) If the Test Fuel Category (TI-44) of a test within a Base Level is 'M' (Methanol), 'E' (Ethanol), 'CNG' (Compressed Natural Gas), 'LPG' (Liquid Petroleum Gas), 'LNG' (Liquified Natural Gas), or 'H' (Hydrogen), then the Test Fuel Category must be equal to one of the Base Level Fuel Usages (GL-110.5). | (GL-110.5) | Active | Not Under Development |
| VERIFY-4673 | Fuel Economy | FE Label | LD-FE-GL-BR097 | The Release Date (GL-176) cannot be before January 2nd of the year prior to Model Year (GL-3) or after December 31st of the Model Year (GL-3). | The Release Date (GL-176) cannot be before January 2nd of the year prior to Model Year (GL-3) or after December 31st of the Model Year (GL-3). | (GL-176) | Active | Not Under Development |
| VERIFY-4764 | Fuel Economy | FE Label | LD-FE-GL-BR098 | The combination of Carline Manufacturer Code (GL-10), Division Code (GL-11), and CarlineCode (GL-12) must exist at least once in the repeated subconfiguration sales information (GL-125.5, GL-125.6, and GL-125.7). | The combination of Carline Manufacturer Code (GL-10), Division Code (GL-11), and CarlineCode (GL-12) must exist at least once in the repeated subconfiguration sales information (GL-125.5, GL-125.6, and GL-125.7). | (GL-12) (GL-11) (GL-10) | Active | Not Under Development |
| VERIFY-4601 | Fuel Economy | FE Label | LD-FE-GL-BR099a | If the combination of Model Year (GL-3), Carline Manufacturer Code (GL-10), Division Code (GL-11), Carline Code (GL-12), Test Group (GL-13.5), Engine Configuration Number (GL-25), Transmission Type (GL-67), Transmission Lockup (GL-69), Transmission Creeper Gear (GL-70), Total Number of Transmission Gears (GL-71), Number of Transmission Modes (GL-76), and Drive System (GL-72) with the same values already exists in a fuel economy label, then Model Type Descriptor Field (GL-78.2) is required. | If the combination of Model Year (GL-3), Carline Manufacturer Code (GL-10), Division Code (GL-11), Carline Code (GL-12), Test Group (GL-13.5), Engine Configuration Number (GL-25), Transmission Type (GL-67), Transmission Lockup (GL-69), Transmission Creeper Gear (GL-70), Total Number of Transmission Gears (GL-71), Number of Transmission Modes (GL-76), and Drive System (GL-72) with the same values already exists in a fuel economy label, then Model Type Descriptor Field (GL-78.2) is required. | (GL-78.2) | Active | Not Under Development |
| VERIFY-19397 | Fuel Economy | FE Label | LD-FE-GL-BR099b | If the combination of Model Year (GL-3), Carline Manufacturer Code (GL-10), Division Code (GL-11), Carline Code (GL-12), Test Group (GL-13.5), Transmission Type (GL-67), Transmission Lockup (GL-69), Transmission Creeper Gear (GL-70), Total Number of Transmission Gears (GL-71), Number of Transmission Modes (GL-76), and Drive System (GL-72) with the same values already exists in a fuel economy label, then Model Type Descriptor Field (GL-78.2) is required. | If the combination of Model Year (GL-3), Carline Manufacturer Code (GL-10), Division Code (GL-11), Carline Code (GL-12), Test Group (GL-13.5), Transmission Type (GL-67), Transmission Lockup (GL-69), Transmission Creeper Gear (GL-70), Total Number of Transmission Gears (GL-71), Number of Transmission Modes (GL-76), and Drive System (GL-72) with the same values already exists in a fuel economy label, then Model Type Descriptor Field (GL-78.2) is required. | (GL-78.2) | Active | Not Under Development |
| VERIFY-4839 | Fuel Economy | FE Label | LD-FE-GL-BR100 | If there is only one Drive Source (GL-13.5.1) and that Drive Source (GL-13.5.1) equals 'E' (Electric Motor), then Fuel Economy Label Calculation Approach (GL-79) must equal 'EV' (Electric Vehicle 2-cycle label) or 'EV-5C' (Electric Vehicle 5-cycle label). | If there is only one Drive Source (GL-13.5.1) and that Drive Source (GL-13.5.1) equals 'E' (Electric Motor), then Fuel Economy Label Calculation Approach (GL-79) must equal 'EV' (Electric Vehicle 2-cycle label) or 'EV-5C' (Electric Vehicle 5-cycle label). | (GL-79) | Active | Not Under Development |
| VERIFY-4706 | Fuel Economy | FE Label | LD-FE-GL-BR101 | If Drive Source (GL-13.5.1) equals 'C' (Combustion Engine) and 'E' (Electric Motor) and Off-board Charge Capable Indicator (GL-13.5.12) equals 'Yes', then Fuel Economy Label Calculation Approach (GL-79) must equal 'PHEV' (Plug-in Hybrid Label). | If Drive Source (GL-13.5.1) equals 'C' (Combustion Engine) and 'E' (Electric Motor) and Off-board Charge Capable Indicator (GL-13.5.12) equals 'Yes', then Fuel Economy Label Calculation Approach (GL-79) must equal 'PHEV' (Plug-in Hybrid Label). | (GL-79) | Active | Not Under Development |
| VERIFY-4790 | Fuel Economy | FE Label | LD-FE-GL-BR102 | If Fuel Economy Label Calculation Approach (GL-79) is equal to 'PHEV' (Plug-In Hybrid Label), then Charge Depleting Fuel Economy Label Calculation Approach (GL-79.2) is required; otherwise, it is not allowed. | If Fuel Economy Label Calculation Approach (GL-79) is equal to 'PHEV' (Plug-In Hybrid Label), then Charge Depleting Fuel Economy Label Calculation Approach (GL-79.2) is required; otherwise, it is not allowed. | (GL-79.2) | Active | Not Under Development |
| VERIFY-4770 | Fuel Economy | FE Label | LD-FE-GL-BR103 | If Fuel Economy Label Calculation Approach (GL-79) is equal to 'PHEV' (Plug-In Hybrid Label), then Charge Sustaining Fuel Economy Label Calculation Approach (GL-79.3) is required; otherwise, it is not allowed. | If Fuel Economy Label Calculation Approach (GL-79) is equal to 'PHEV' (Plug-In Hybrid Label), then Charge Sustaining Fuel Economy Label Calculation Approach (GL-79.3) is required; otherwise, it is not allowed. | (GL-79.3) | Active | Not Under Development |
| VERIFY-4307 | Fuel Economy | FE Label | LD-FE-GL-BR104a | If Manufacturer Voluntary Lower FE or Higher Energy Consumption Label Value (GL-85) equals 'Y' (Yes) AND Fuel Economy Value Unit (GL-90) equals 'MPG' (Miles per Gallon) OR 'MPK' (Miles per Kilogram) then at least one of the following three statements must be true for at least one Fuel Usage (GL-89) for the label: 1) Manufacturer Voluntary Lower FE or Higher Energy Consumption City Label Value (GL-100) IS LESS THAN Manufacturer Calculated Rounded Adjusted Model Type City FE Value (GL-97). 2) Manufacturer Voluntary Lower FE or Higher Energy Consumption Highway Label Value (GL-101) IS LESS THAN Manufacturer Calculated Rounded Adjusted Model Type Highway FE Value (GL-98). 3) Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) IS LESS THAN Manufacturer Calculated Rounded Adjusted Model Type Combined FE Value (GL-99). |
If Manufacturer Voluntary Lower FE or Higher Energy Consumption Label Value (GL-85) equals 'Y' (Yes) AND Fuel Economy Value Unit (GL-90) equals 'MPG' (Miles per Gallon) OR 'MPK' (Miles per Kilogram) then at least one of the following three statements must be true for at least one Fuel Usage (GL-89) for the label: 1) Manufacturer Voluntary Lower FE or Higher Energy Consumption City Label Value (GL-100) IS LESS THAN Manufacturer Calculated Rounded Adjusted Model Type City FE Value (GL-97). 2) Manufacturer Voluntary Lower FE or Higher Energy Consumption Highway Label Value (GL-101) IS LESS THAN Manufacturer Calculated Rounded Adjusted Model Type Highway FE Value (GL-98). 3) Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) IS LESS THAN Manufacturer Calculated Rounded Adjusted Model Type Combined FE Value (GL-99). |
(GL-89) (GL-97) (GL-98) (GL-99) (GL-100) (GL-101) (GL-102) | Active | Not Under Development |
| VERIFY-9096 | Fuel Economy | FE Label | LD-FE-GL-BR104b | If Manufacturer Voluntary Lower FE or Higher Energy Consumption Label Value (GL-85) equals 'Y' (Yes) AND Fuel Economy Value Unit (GL-90) equals 'KW-HR100' (Kilowatt-Hour per 100 Miles), then at least one of the following three statements must be true for at least one Fuel Usage (GL-89) for the label: 1) Manufacturer Voluntary Lower FE or Higher Energy Consumption City Label Value (GL-100) IS GREATER THAN Manufacturer Calculated Rounded Adjusted Model Type City FE Value (GL-97). 2) Manufacturer Voluntary Lower FE or Higher Energy Consumption Highway Label Value (GL-101) IS GREATER THAN Manufacturer Calculated Rounded Adjusted Model Type Highway FE Value (GL-98). 3) Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) IS GREATER THAN Manufacturer Calculated Rounded Adjusted Model Type Combined FE Value (GL-99). |
If Manufacturer Voluntary Lower FE or Higher Energy Consumption Label Value (GL-85) equals 'Y' (Yes) AND Fuel Economy Value Unit (GL-90) equals 'KW-HR100' (Kilowatt-Hour per 100 Miles), then at least one of the following three statements must be true for at least one Fuel Usage (GL-89) for the label: 1) Manufacturer Voluntary Lower FE or Higher Energy Consumption City Label Value (GL-100) IS GREATER THAN Manufacturer Calculated Rounded Adjusted Model Type City FE Value (GL-97). 2) Manufacturer Voluntary Lower FE or Higher Energy Consumption Highway Label Value (GL-101) IS GREATER THAN Manufacturer Calculated Rounded Adjusted Model Type Highway FE Value (GL-98). 3) Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) IS GREATER THAN Manufacturer Calculated Rounded Adjusted Model Type Combined FE Value (GL-99). |
(GL-89) (GL-97) (GL-98) (GL-99) (GL-100) (GL-101) (GL-102) | Active | Not Under Development |
| VERIFY-4620 | Fuel Economy | FE Label | LD-FE-GL-BR106 | If Fuel Usage (GL-89) equals 'H' (Hydrogen), then two values for Fuel Economy Value Unit (GL-90) must be present and must equal 'MPK' (miles per kilogram) and 'MPG' (miles per gallon). |
If Fuel Usage (GL-89) equals 'H' (Hydrogen), then two values for Fuel Economy Value Unit (GL-90) must be present and must equal 'MPK' (miles per kilogram) and 'MPG' (miles per gallon). |
(GL-90) | Active | Not Under Development |
| VERIFY-4758 | Fuel Economy | FE Label | LD-FE-GL-BR109 | If Mfr Voluntary Lower FE or Higher Energy Consumption Label Value (GL-85) is equal to 'N' (No), then Manufacturer Voluntary Lower FE or Higher Energy Consumption City Label Value (GL-100) is not allowed. | If Mfr Voluntary Lower FE or Higher Energy Consumption Label Value (GL-85) is equal to 'N' (No), then Manufacturer Voluntary Lower FE or Higher Energy Consumption City Label Value (GL-100) is not allowed. | (GL-100) | Active | Not Under Development |
| VERIFY-4691 | Fuel Economy | FE Label | LD-FE-GL-BR110 | If Manufacturer Voluntary Lower FE or Higher Energy Consumption City Label Value (GL-100) is present and Fuel Economy Value Unit (GL-90) is equal to 'MPG' (miles per gallon) or 'MPK' (miles per kilometer), then Manufacturer Voluntary Lower FE or Higher Energy Consumption City Label Value (GL-100) must be lower than Mfr Calculated Rounded Adjusted Model Type City FE Value (GL-97). | If Manufacturer Voluntary Lower FE or Higher Energy Consumption City Label Value (GL-100) is present and Fuel Economy Value Unit (GL-90) is equal to 'MPG' (miles per gallon) or 'MPK' (miles per kilometer), then Manufacturer Voluntary Lower FE or Higher Energy Consumption City Label Value (GL-100) must be lower than Mfr Calculated Rounded Adjusted Model Type City FE Value (GL-97). | (GL-97) (GL-100) | Active | Not Under Development |
| VERIFY-4861 | Fuel Economy | FE Label | LD-FE-GL-BR111 | If Manufacturer Voluntary Lower FE or Higher Energy Consumption City Label Value (GL-100) is present and Fuel Economy Value Unit (GL-90) is equal to 'KW-HR100' (kilowatt-hour per 100 miles), then Manufacturer Voluntary Lower FE or Higher Energy Consumption City Label Value (GL-100) must be greater than Mfr Calculated Rounded Adjusted Model Type City FE Value (GL-97). | If Manufacturer Voluntary Lower FE or Higher Energy Consumption City Label Value (GL-100) is present and Fuel Economy Value Unit (GL-90) is equal to 'KW-HR100' (kilowatt-hour per 100 miles), then Manufacturer Voluntary Lower FE or Higher Energy Consumption City Label Value (GL-100) must be greater than Mfr Calculated Rounded Adjusted Model Type City FE Value (GL-97). | (GL-97) (GL-100) | Active | Not Under Development |
| VERIFY-4877 | Fuel Economy | FE Label | LD-FE-GL-BR112 | If Mfr Voluntary Lower Fuel Economy or Higher Energy Consumption Label Value (GL-85) is equal to 'N' (No), then Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) is not allowed. | If Mfr Voluntary Lower Fuel Economy or Higher Energy Consumption Label Value (GL-85) is equal to 'N' (No), then Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) is not allowed. | (GL-102) | Active | Not Under Development |
| VERIFY-4612 | Fuel Economy | FE Label | LD-FE-GL-BR113a | If Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) is present and Fuel Economy Value Unit (GL-90) is equal to 'MPG' (miles per gallon) or 'MPK' (miles per kilometer), then Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) must be lower than Mfr Calculated Rounded Adjusted Model Type Combined FE Value (GL-99). | If Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) is present and Fuel Economy Value Unit (GL-90) is equal to 'MPG' (miles per gallon) or 'MPK' (miles per kilometer), then Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) must be lower than Mfr Calculated Rounded Adjusted Model Type Combined FE Value (GL-99). | (GL-99) (GL-102) | Active | Not Under Development |
| VERIFY-5814 | Fuel Economy | FE Label | LD-FE-GL-BR113b | If Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) is present and Fuel Economy Value Unit (GL-90) is equal to 'MPG' (miles per gallon) or 'MPK' (miles per kilometer), then Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) must be lower than Mfr Calculated Rounded Adjusted Model Type Combined FE Value (GL-99). | If Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) is present and Fuel Economy Value Unit (GL-90) is equal to 'MPG' (miles per gallon) or 'MPK' (miles per kilometer), then Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) must be lower than Mfr Calculated Rounded Adjusted Model Type Combined FE Value (GL-99). | (GL-99) (GL-102) | Active | Not Under Development |
| VERIFY-4828 | Fuel Economy | FE Label | LD-FE-GL-BR114 | If Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) is present and Fuel Economy Value Unit (GL-90) is equal to 'KW-HR100' (kilowatt-hour per 100 miles), then Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) must be greater than Mfr Calculated Rounded Adjusted Model Type Combined FE Value (GL-99). | If Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) is present and Fuel Economy Value Unit (GL-90) is equal to 'KW-HR100' (kilowatt-hour per 100 miles), then Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) must be greater than Mfr Calculated Rounded Adjusted Model Type Combined FE Value (GL-99). | (GL-99) (GL-102) | Active | Not Under Development |
| VERIFY-4780 | Fuel Economy | FE Label | LD-FE-GL-BR115 | If Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) is present, then it must be greater than or equal to [1/(0.55/(City-0.5)+0.45/(Hwy-0.5))] rounded to a whole number AND less than or equal to [1/(0.55/(City+0.5)+0.45/(Hwy+0.5))] rounded to a whole number. | If Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) is present, then it must be greater than or equal to [1/(0.55/(City-0.5)+0.45/(Hwy-0.5))] rounded to a whole number AND less than or equal to [1/(0.55/(City+0.5)+0.45/(Hwy+0.5))] rounded to a whole number. | (GL-102) | Active | Not Under Development |
| VERIFY-4893 | Fuel Economy | FE Label | LD-FE-GL-BR116a | If only one value is selected for Fuel Usage (GL-89) and it begins with 'G' or 'D', then EPA Model Type Driving Range (GL-103) is not allowed; otherwise it is required if more than one fuel is selected for Fuel Usage including gasoline and diesel.. | If only one value is selected for Fuel Usage (GL-89) and it begins with 'G' or 'D', then EPA Model Type Driving Range (GL-103) is not allowed; otherwise it is required if more than one fuel is selected for Fuel Usage including gasoline and diesel.. | (GL-103) | Active | Not Under Development |
| VERIFY-6145 | Fuel Economy | FE Label | LD-FE-GL-BR116b | If only one value is selected for Fuel Usage (GL-89) and it begins with 'G' or 'D', then EPA Model Type Driving Range (GL-103) is not allowed; otherwise it is required if more than one fuel is selected for Fuel Usage including gasoline and diesel.. |
If only one value is selected for Fuel Usage (GL-89) and it begins with 'G' or 'D', then EPA Model Type Driving Range (GL-103) is not allowed; otherwise it is required if more than one fuel is selected for Fuel Usage including gasoline and diesel.. |
(GL-103) | Active | Not Under Development |
| VERIFY-4690 | Fuel Economy | FE Label | LD-FE-GL-BR117 | The combination of Carline Manufacturer Code (GL-125.5), Division Code (GL-125.6), Carline Code (GL-125.7), Transmission Type (GL-67), Transmission Lockup (GL-69), Transmission Creeper Gear (GL-70), Total Number of Transmission Gears (GL-71), and Drive System (GL-72) must exist as a certified model in the Test Group dataset (TG) for the Test Group (GL-126). | The combination of Carline Manufacturer Code (GL-125.5), Division Code (GL-125.6), Carline Code (GL-125.7), Transmission Type (GL-67), Transmission Lockup (GL-69), Transmission Creeper Gear (GL-70), Total Number of Transmission Gears (GL-71), and Drive System (GL-72) must exist as a certified model in the Test Group dataset (TG) for the Test Group (GL-126). | (GL-125.5) (GL-125.6) (GL-125.7) (GL-67) (GL-69) (GL-70) (GL-71) (GL-72) | Active | Not Under Development |
| VERIFY-4785 | Fuel Economy | FE Label | LD-FE-GL-BR118 | If Fuel Economy Label Calculation Approach (GL-79) is equal to '5C-MOD' (Modified 5-cycle), and MDPV-Only or ICI Indicator (GL-200) = 'N' (No), and the Test Group (GL-126) specified in the subconfiguration sales section contains a Test Group Fuel (TG-217.1) equal to 'G' (Gasoline) or 'D' (Diesel), then Test Group (GL-126) must have valid values (non-Null) for EPA City Litmus Value (TG-219.3.1) and EPA City Litmus Threshold (TG-219.3.2), and EPA City Litmus Value (TG-219.3.1) must be greater than or equal to EPA City Litmus Threshold (TG-219.3.2). |
If Fuel Economy Label Calculation Approach (GL-79) is equal to '5C-MOD' (Modified 5-cycle), and Litmus Bypass Indicator (GL-200) equals 'N' (No), and the Test Group (GL-126) specified in the subconfiguration sales section contains a Test Group Fuel (TG-217.1) equal to 'G' (Gasoline) or 'D' (Diesel), then Test Group (GL-126) must have valid values (non-Null) for EPA City Litmus Value (TG-219.3.1) and EPA City Litmus Threshold (TG-219.3.2), and EPA City Litmus Value (TG-219.3.1) must be greater than or equal to EPA City Litmus Threshold (TG-219.3.2). |
(GL-126) (TG-219.3.1) (TG-219.3.2) | Active | Under Development (To Be Updated) |
| VERIFY-4637 | Fuel Economy | FE Label | LD-FE-GL-BR119 | If Fuel Economy Label Calculation Approach (GL-79) is equal to '5C-DRV' (Derived 5-cycle), and MDPV-Only or ICI Indicator (GL-200) = "No", and the Test Group (GL-126) specified in the subconfiguration sales section contains a Test Group Fuel (TG-217.1) equal to 'G' (Gasoline) or 'D' (Diesel), then Test Group (GL-126) must have valid values (non-Null) for EPA City Litmus Value (TG-219.3.1), EPA City Litmus Threshold (TG-219.3.2), EPA Highway Litmus Value (TG-219.4.1), and EPA Highway Litmus Threshold (TG-219.4.2), and EPA City Litmus Value (TG-219.3.1) must be greater than or equal to EPA City Litmus Threshold (TG-219.3.2), and EPA Highway Litmus Value (TG-219.4.1) must be greater than or equal to EPA Highway Litmus Threshold (TG-219.4.2) | If Fuel Economy Label Calculation Approach (GL-79) is equal to '5C-DRV' (Derived 5-cycle), and Litmus Bypass Indicator (GL-200) equals 'N' (No), and the Test Group (GL-126) specified in the subconfiguration sales section contains a Test Group Fuel (TG-217.1) equal to 'G' (Gasoline) or 'D' (Diesel), then Test Group (GL-126) must have valid values (non-Null) for EPA City Litmus Value (TG-219.3.1), EPA City Litmus Threshold (TG-219.3.2), EPA Highway Litmus Value (TG-219.4.1), and EPA Highway Litmus Threshold (TG-219.4.2), and EPA City Litmus Value (TG-219.3.1) must be greater than or equal to EPA City Litmus Threshold (TG-219.3.2), and EPA Highway Litmus Value (TG-219.4.1) must be greater than or equal to EPA Highway Litmus Threshold (TG-219.4.2) | (GL-126) (TG-219.4.1) (TG-219.4.2) (TG-219.3.1) (TG-219.3.2) | Active | Under Development (To Be Updated) |
| VERIFY-4867 | Fuel Economy | FE Label | LD-FE-GL-BR120 | The Vehicle ID (GL-128) and Vehicle Configuration Number (GL-129) combination must have associated Test Procedure Dynamometer Coefficients Category (VI-40.5) equal to 'C-H-E' (City/Highway/Evap). | The Vehicle ID (GL-128) and Vehicle Configuration Number (GL-129) combination must have associated Test Procedure Dynamometer Coefficients Category (VI-40.5) equal to 'C-H-E' (City/Highway/Evap). | (GL-128) (GL-129) (VI-40.5) | Active | Not Under Development |
| VERIFY-4591 | Fuel Economy | FE Label | LD-FE-GL-BR122 | If Fuel Economy Label Calculation Approach (GL-79) is equal to '5C-DRV', then Test 5-Cycle Category (GL-130.5) must equal 'FTP75' or 'HWY'; all other enumerations (including Null) are not allowed. | If Fuel Economy Label Calculation Approach (GL-79) is equal to '5C-DRV', then Test 5-Cycle Category (GL-130.5) must equal 'FTP75' or 'HWY'; all other enumerations (including Null) are not allowed. | (GL-130.5) | Active | Not Under Development |
| VERIFY-4644 | Fuel Economy | FE Label | LD-FE-GL-BR123 | If Fuel Economy Label Calculation Approach (GL-79) is equal to '5C-MOD', then Test 5-Cycle Category (GL-130.5) must equal 'FTP75', 'HWY', or 'US06'; all other enumerations (including Null) are not allowed. | If Fuel Economy Label Calculation Approach (GL-79) is equal to '5C-MOD', then Test 5-Cycle Category (GL-130.5) must equal 'FTP75', 'HWY', or 'US06'; all other enumerations (including Null) are not allowed. | (GL-130.5) | Active | Not Under Development |
| VERIFY-4636 | Fuel Economy | FE Label | LD-FE-GL-BR125 | If Fuel Economy Label Calculation Approach (GL-79) is equal to '5C-DRV' and Test 5-Cycle Category (GL-130.5) is equal to "FTP75", then Test Number (GL-127) must have associated Test Result/Emission Name (TI-19) equal to 'MFR FE'. | If Fuel Economy Label Calculation Approach (GL-79) is equal to '5C-DRV' and Test 5-Cycle Category (GL-130.5) is equal to "FTP75", then Test Number (GL-127) must have associated Test Result/Emission Name (TI-19) equal to 'MFR FE'. | (GL-127) (TI-19) | Active | Not Under Development |
| VERIFY-4767 | Fuel Economy | FE Label | LD-FE-GL-BR126 | If Test Fuel Category (GL-130.2) is equal to 'G', 'D', 'CNG', or 'LPG' and Fuel Economy Label Calculation Approach (GL-79) is equal to '5C-VEHSPEC' or '5C-MOD' and Hybrid Indicator (GL-13.5.2) is equal to 'No' and Test 5-Cycle Category (GL-130.5) is equal to 'FTP75', then Test Number (GL-127) must have associated Test Result/Emission Name(s) (TI-19) equal to 'FE BAG 1', 'FE BAG 2', and 'FE BAG 3'. (Test Result/Emission Name 'FE BAG 4' is not allowed). | If Test Fuel Category (GL-130.2) is equal to 'G', 'D', 'CNG', or 'LPG' and Fuel Economy Label Calculation Approach (GL-79) is equal to '5C-VEHSPEC' or '5C-MOD' and Hybrid Indicator (GL-13.5.2) is equal to 'No' and Test 5-Cycle Category (GL-130.5) is equal to 'FTP75', then Test Number (GL-127) must have associated Test Result/Emission Name(s) (TI-19) equal to 'FE BAG 1', 'FE BAG 2', and 'FE BAG 3'. (Test Result/Emission Name 'FE BAG 4' is not allowed). | (GL-127) (TI-19) | Active | Not Under Development |
| VERIFY-4683 | Fuel Economy | FE Label | LD-FE-GL-BR127 | If Test Fuel Category (GL-130.2) is equal to 'G','D','CNG',or 'LPG' and Fuel Economy Label Calculation Approach (GL-79) is equal to '5C-VEHSPEC' or '5C-MOD' and Hybrid Indicator (GL-13.5) is equal to 'Yes' and 5 Cycle Hybrid Fuel Economy Label Calculation Approach (GL-79.1) is equal to 'HEV-4B' and Test 5-Cycle Category (GL-130.5) is equal to 'FTP75', then Test Number (GL-127) must have associated Test Result/Emission Name(s) (TI-19) equal to 'FE BAG 1', 'FE BAG 2', 'FE BAG 3', and 'FE BAG 4'. | If Test Fuel Category (GL-130.2) is equal to 'G','D','CNG',or 'LPG' and Fuel Economy Label Calculation Approach (GL-79) is equal to '5C-VEHSPEC' or '5C-MOD' and Hybrid Indicator (GL-13.5) is equal to 'Yes' and 5 Cycle Hybrid Fuel Economy Label Calculation Approach (GL-79.1) is equal to 'HEV-4B' and Test 5-Cycle Category (GL-130.5) is equal to 'FTP75', then Test Number (GL-127) must have associated Test Result/Emission Name(s) (TI-19) equal to 'FE BAG 1', 'FE BAG 2', 'FE BAG 3', and 'FE BAG 4'. | (GL-127) (TI-19) | Active | Not Under Development |
| VERIFY-4834 | Fuel Economy | FE Label | LD-FE-GL-BR128 | If Test 5-Cycle Category (GL-130.5) is equal to 'HWY', then Test Number (GL-127) must have associated Test Result/Emission Name (TI-19) equal to 'MFR FE'. (Test Result/Emission Name(s) 'FE BAG 1', 'FE BAG 2', 'FE BAG 3', and 'FE BAG 4' are not allowed). | If Test 5-Cycle Category (GL-130.5) is equal to 'HWY', then Test Number (GL-127) must have associated Test Result/Emission Name (TI-19) equal to 'MFR FE'. (Test Result/Emission Name(s) 'FE BAG 1', 'FE BAG 2', 'FE BAG 3', and 'FE BAG 4' are not allowed). | (GL-127) (TI-19) | Active | Not Under Development |
| VERIFY-4809 | Fuel Economy | FE Label | LD-FE-GL-BR129 | If Fuel Economy Label Calculation Approach (GL-79) is equal to '5C-VEHSPEC' and Test 5-Cycle Category (GL-130.5) is equal to 'US06', then Test Number (GL-127) must have associated Test Result/Emission Name(s) (TI-19) equal to 'FE BAG 1', and 'FE BAG 2'. (Test Result/Emission Name(s) 'FE BAG 3', and 'FE BAG 4' are not allowed). | If Fuel Economy Label Calculation Approach (GL-79) is equal to '5C-VEHSPEC' and Test 5-Cycle Category (GL-130.5) is equal to 'US06', then Test Number (GL-127) must have associated Test Result/Emission Name(s) (TI-19) equal to 'FE BAG 1', and 'FE BAG 2'. (Test Result/Emission Name(s) 'FE BAG 3', and 'FE BAG 4' are not allowed). | (GL-127) (TI-19) | Active | Not Under Development |
| VERIFY-4774 | Fuel Economy | FE Label | LD-FE-GL-BR130 | If Fuel Economy Label Calculation Approach (GL-79) is equal to '5C-MOD' and Test 5-Cycle Category (GL-130.5) is equal to 'US06', then Test Number (GL-127) must have associated Test Result/Emission Name(s) (TI-19) equal to 'MFR FE', 'FE BAG 1', and 'FE BAG 2'. (Test Result/Emission Name(s) 'FE BAG 3', and 'FE BAG 4' are not allowed). | If Fuel Economy Label Calculation Approach (GL-79) is equal to '5C-MOD' and Test 5-Cycle Category (GL-130.5) is equal to 'US06', then Test Number (GL-127) must have associated Test Result/Emission Name(s) (TI-19) equal to 'MFR FE', 'FE BAG 1', and 'FE BAG 2'. (Test Result/Emission Name(s) 'FE BAG 3', and 'FE BAG 4' are not allowed). | (GL-127) (TI-19) | Active | Not Under Development |
| VERIFY-4846 | Fuel Economy | FE Label | LD-FE-GL-BR131 | If Test 5-Cycle Category (GL-130.5) is equal to 'FTP20', then Test Number (GL-127) must have associated Test Result/Emission Name(s) (TI-19) equal to 'FE BAG 1', 'FE BAG 2' and 'FE BAG 3'. (Test Result/Emission Name 'FE BAG 4' is not allowed). | If Test 5-Cycle Category (GL-130.5) is equal to 'FTP20', then Test Number (GL-127) must have associated Test Result/Emission Name(s) (TI-19) equal to 'FE BAG 1', 'FE BAG 2' and 'FE BAG 3'. (Test Result/Emission Name 'FE BAG 4' is not allowed). | (GL-127) (TI-19) | Active | Not Under Development |
| VERIFY-4607 | Fuel Economy | FE Label | LD-FE-GL-BR132 | If Test 5-Cycle Category (GL-130.5) is equal to 'SC03', then Test Number (GL-127) must have associated Test Result/Emission Name (TI-19) equal to 'MFR FE'. (Test Result/Emission Name(s) 'FE BAG 1', 'FE BAG 2', 'FE BAG 3', and 'FE BAG 4' are not allowed). | If Test 5-Cycle Category (GL-130.5) is equal to 'SC03', then Test Number (GL-127) must have associated Test Result/Emission Name (TI-19) equal to 'MFR FE'. (Test Result/Emission Name(s) 'FE BAG 1', 'FE BAG 2', 'FE BAG 3', and 'FE BAG 4' are not allowed). | (GL-127) (TI-19) | Active | Not Under Development |
| VERIFY-4805 | Fuel Economy | FE Label | LD-FE-GL-BR133 | If the Total Road Load Horsepower (GL-122) is greater than the tested vehicles' EPA-Calculated Total Road Load Horsepower (VI-43.5), or the Equivalent Test Weight (ETW) (GL-123) is greater than the tested vehicles' ETW (VI-30), or the axle ratio (GL-120) is greater than the tested vehicles' axle ratio, then Analytically-Derived FE / CREE Indicator (GL-131) must be equal to 'Yes'. | If the Total Road Load Horsepower (GL-122) is greater than the tested vehicles' EPA-Calculated Total Road Load Horsepower (VI-43.5), or the Equivalent Test Weight (ETW) (GL-123) is greater than the tested vehicles' ETW (VI-30), or the axle ratio (GL-120) is greater than the tested vehicles' axle ratio, then Analytically-Derived FE / CREE Indicator (GL-131) must be equal to 'Yes'. | (GL-131) | Active | Not Under Development |
| VERIFY-4884 | Fuel Economy | FE Label | LD-FE-GL-BR134 | If the Analytically-Derived FE / CREE Indicator (GL-131) is equal to 'No' and [Total Road Load Horsepower (GL-122) is less than the tested vehicles' EPA-Calculated Total Road Load Horsepower (VI-43.5), or the Equivalent Test Weight (ETW) (GL-123) is less than the tested vehicles' ETW (VI-30), or the Axle Ratio (GL-120) is less than the tested vehicles' axle ratio], then Data substitution Indicator (GL-132) must be equal to 'Yes'. | If the Analytically-Derived FE / CREE Indicator (GL-131) is equal to 'No' and [Total Road Load Horsepower (GL-122) is less than the tested vehicles' EPA-Calculated Total Road Load Horsepower (VI-43.5), or the Equivalent Test Weight (ETW) (GL-123) is less than the tested vehicles' ETW (VI-30), or the Axle Ratio (GL-120) is less than the tested vehicles' axle ratio], then Data substitution Indicator (GL-132) must be equal to 'Yes'. | (GL-132) | Active | Not Under Development |
| VERIFY-4798 | Fuel Economy | FE Label | LD-FE-GL-BR136 | If Model Year (GL-3) is greater than or equal to 2011, then the Averaging Method (GL-133) cannot be equal to 'S' (Simple averaging). | If Model Year (GL-3) is greater than or equal to 2011, then the Averaging Method (GL-133) cannot be equal to 'S' (Simple averaging). | (GL-133) | Active | Not Under Development |
| VERIFY-4832 | Fuel Economy | FE Label | LD-FE-GL-BR137 | If Gas Guzzler Exempt (GL-106) is equal to 'T' (Truck), then FE Label Carline Class Code (CL-5) for entered Carline Code (GL-12) must be equal to 10, 11, 12, 13, 14, 15, 17, 18, 19, 20, 21, 22, 23, 30, 31, 32, or 33. |
If Gas Guzzler Exempt (GL-106) is equal to 'T' (Truck), then FE Label Carline Class Code (CL-5) for entered Carline Code (GL-12) must be equal to 10, 11, 12, 13, 14, 15, 17, 18, 19, 20, 21, 22, 23, 30, 31, 32, or 33. |
(CL-5) (GL-12) | Active | Not Under Development |
| VERIFY-4710 | Fuel Economy | FE Label | LD-FE-GL-BR138 | If Gas Guzzler Exempt (GL-106) is equal to 'N' (Not Exempt) and if Fuel Usage (GL-89) begins with 'G' (Gasoline) or 'D' (Diesel), then Manufacturer-Calculated Gas Guzzler Mile Per Gallon (GL-173.1) is required, otherwise it is optional. |
If Gas Guzzler Exempt (GL-106) is equal to 'N' (Not Exempt) and if Fuel Usage (GL-89) begins with 'G' (Gasoline) or 'D' (Diesel), then Manufacturer-Calculated Gas Guzzler Mile Per Gallon (GL-173.1) is required, otherwise it is optional. |
(GL-173.1) | Active | Not Under Development |
| VERIFY-5622 | Fuel Economy | FE Label | LD-FE-GL-BR139 | If Mfr Voluntary Lower FE or Higher Energy Consumption Label Value (GL-85) is equal to 'No', then Manufacturer Voluntary Lower FE or Higher Energy Consumption Highway Label Value (GL-101) is not allowed. | If Mfr Voluntary Lower FE or Higher Energy Consumption Label Value (GL-85) is equal to 'No', then Manufacturer Voluntary Lower FE or Higher Energy Consumption Highway Label Value (GL-101) is not allowed. | (GL-101) | Active | Not Under Development |
| VERIFY-5623 | Fuel Economy | FE Label | LD-FE-GL-BR140 | If Manufacturer Voluntary Lower FE or Higher Energy Consumption Highway Label Value (GL-101) is present and Fuel Economy Value Unit (GL-90) is equal to 'MPG' (miles per gallon) or 'MPK' (miles per kilogram), then Manufacturer Voluntary Lower FE or Higher Energy Consumption Highway Label Value (GL-101) must be lower than Mfr Calculated Rounded Adjusted Model Type Highway FE Value (GL-98). | If Manufacturer Voluntary Lower FE or Higher Energy Consumption Highway Label Value (GL-101) is present and Fuel Economy Value Unit (GL-90) is equal to 'MPG' (miles per gallon) or 'MPK' (miles per kilogram), then Manufacturer Voluntary Lower FE or Higher Energy Consumption Highway Label Value (GL-101) must be lower than Mfr Calculated Rounded Adjusted Model Type Highway FE Value (GL-98). | (GL-101) (GL-98) | Active | Not Under Development |
| VERIFY-5624 | Fuel Economy | FE Label | LD-FE-GL-BR141 | If Manufacturer Voluntary Lower FE or Higher Energy Consumption Highway Label Value (GL-101) is present and Fuel Economy Value Unit (GL-90) is equal to 'KW-HR/100Miles' (kilowatt-hour per 100 miles), then Manufacturer Voluntary Lower FE or Higher Energy Consumption Highway Label Value (GL-101) must be greater than Mfr Calculated Rounded Adjusted Model Type Highway FE Value (GL-98). | If Manufacturer Voluntary Lower FE or Higher Energy Consumption Highway Label Value (GL-101) is present and Fuel Economy Value Unit (GL-90) is equal to 'KW-HR/100Miles' (kilowatt-hour per 100 miles), then Manufacturer Voluntary Lower FE or Higher Energy Consumption Highway Label Value (GL-101) must be greater than Mfr Calculated Rounded Adjusted Model Type Highway FE Value (GL-98). | (GL-101) (GL-98) | Active | Not Under Development |
| VERIFY-5625 | Fuel Economy | FE Label | LD-FE-GL-BR142 | If Test Fuel Category (GL-130.2) = 'G' (Gasoline), 'D' (Diesel), 'CNG' (Compressed Natural Gas),or 'LPG' (Liquified Natural Gas) and Fuel Economy Label Calculation Approach (GL-79) = '5C-VEHSPEC' (Vehicle Specific 5-cycle label) or '5C-MOD' (Derived Vehicle Specific 5-cycle Calculation Approach for city label but Modified 5-cycle Calculation Approach for Highway label) and Hybrid Indicator (GL-13.5.2) = 'Y' (Yes) and 5 Cycle Hybrid Fuel Economy Label Calculation Approach (GL-79.1)= 'HEV-2B' (Hybrid 2 Bag) and Test 5-Cycle Category (GL-130.5)= 'FTP75' (Federal Test Procedure (75 °F)), then Test Number (GL-127) must have associated Test Result/Emission Name(s) (TI-19) equal to 'FE BAG 1', and 'FE BAG 2'. (Test Result/Emission Name(s) 'FE BAG 3', and 'FE BAG 4' are not allowed). | If Test Fuel Category (GL-130.2) = 'G' (Gasoline), 'D' (Diesel), 'CNG' (Compressed Natural Gas),or 'LPG' (Liquified Natural Gas) and Fuel Economy Label Calculation Approach (GL-79) = '5C-VEHSPEC' (Vehicle Specific 5-cycle label) or '5C-MOD' (Derived Vehicle Specific 5-cycle Calculation Approach for city label but Modified 5-cycle Calculation Approach for Highway label) and Hybrid Indicator (GL-13.5.2) = 'Y' (Yes) and 5 Cycle Hybrid Fuel Economy Label Calculation Approach (GL-79.1)= 'HEV-2B' (Hybrid 2 Bag) and Test 5-Cycle Category (GL-130.5)= 'FTP75' (Federal Test Procedure (75 °F)), then Test Number (GL-127) must have associated Test Result/Emission Name(s) (TI-19) equal to 'FE BAG 1', and 'FE BAG 2'. (Test Result/Emission Name(s) 'FE BAG 3', and 'FE BAG 4' are not allowed). | (GL-127) | Active | Not Under Development |
| VERIFY-5626 | Fuel Economy | FE Label | LD-FE-GL-BR143 | If Fuel Economy Label Calculation Approach (GL-79) = '5C-VEHSPEC' (Vehicle Specific 5-cycle label) and Test 5-Cycle Category (GL-130.5) = 'US06' Then Test Number (GL-127) must have associated Test Result/Emission Name(s) (TI-19) equal to 'FE BAG 1' and 'FE BAG 2'. (Test Result/Emission Name(s) "FE BAG 3", and "FE BAG 4" are not allowed). | If Fuel Economy Label Calculation Approach (GL-79) = '5C-VEHSPEC' (Vehicle Specific 5-cycle label) and Test 5-Cycle Category (GL-130.5) = 'US06' Then Test Number (GL-127) must have associated Test Result/Emission Name(s) (TI-19) equal to 'FE BAG 1' and 'FE BAG 2'. (Test Result/Emission Name(s) "FE BAG 3", and "FE BAG 4" are not allowed). | (GL-127) | Active | Not Under Development |
| VERIFY-11172 | Fuel Economy | FE Label | LD-FE-GL-BR144 | Test Numbers (GL-127) with the following Test Fuel Types are not allowed for FE Label (Test Fuel Type (TI-9) : 8, 10, 31, 32, 33, 36, 45, 71). | Test Numbers (GL-127) with the following Test Fuel Types are not allowed for FE Label (Test Fuel Type (TI-9) : 8, 10, 31, 32, 33, 36, 45, 71). | (GL-127) | Active | Not Under Development |
| VERIFY-11347 | Fuel Economy | FE Label | LD-FE-GL-BR145 | Transmission Type (GL-67) equal to 'OT' (Other) is not allowed. |
Transmission Type (GL-67) equal to 'OT' (Other) is not allowed. |
(GL-67) | Active | Not Under Development |
| VERIFY-11357 | Fuel Economy | FE Label | LD-FE-GL-BR146 | If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Fuel Economy Rating (GL-203) is required, otherwise it is optional. |
If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Fuel Economy Rating (GL-203) is required, otherwise it is optional. |
(GL-203) | Active | Not Under Development |
| VERIFY-11404 | Fuel Economy | FE Label | LD-FE-GL-BR147 | If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated City Fuel Economy Label Lower Range Value (GL-168) is not allowed. |
If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated City Fuel Economy Label Lower Range Value (GL-168) is not allowed. |
(GL-168) | Active | Not Under Development |
| VERIFY-11359 | Fuel Economy | FE Label | LD-FE-GL-BR148 | If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated GHG Rating (GL-205) is required, otherwise it is optional. |
If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated GHG Rating (GL-205) is required, otherwise it is optional. |
(GL-205) | Active | Not Under Development |
| VERIFY-11360 | Fuel Economy | FE Label | LD-FE-GL-BR149 | If Gas Guzzler Exempt (GL-106) equals 'N' (No), then FE Label Carline Class Code (CL-5) for the Carline for this FE Label must be less than '10' or equal to '17' or '18'. | If Gas Guzzler Exempt (GL-106) equals 'N' (No), then FE Label Carline Class Code (CL-5) for the Carline for this FE Label must be less than '10' or equal to '17' or '18'. | (CL-5) | Active | Not Under Development |
| VERIFY-11361 | Fuel Economy | FE Label | LD-FE-GL-BR150 | If Model Year (GL-3) is greater than or equal to '2013', then Unique Carline/Subconfiguration Test Group(s) (GL-207) is required, otherwise it is optional. |
If Model Year (GL-3) is greater than or equal to '2013', then Unique Carline/Subconfiguration Test Group(s) (GL-207) is required, otherwise it is optional. |
(GL-207) | Active | Not Under Development |
| VERIFY-11362 | Fuel Economy | FE Label | LD-FE-GL-BR151 | The Unique Carline/Subconfiguration Test Group(s) (GL-207) must exist in the system. | The Unique Carline/Subconfiguration Test Group(s) (GL-207) must exist in the system. | (GL-207) | Active | Not Under Development |
| VERIFY-11363 | Fuel Economy | FE Label | LD-FE-GL-BR152 | Test Groups provided for Unique Carline/Subconfiguration Test Group(s) (GL-207) must be one of the provided Subconfiguration Test Groups (GL-126). | Test Groups provided for Unique Carline/Subconfiguration Test Group(s) (GL-207) must be one of the provided Subconfiguration Test Groups (GL-126). | (GL-207) | Active | Not Under Development |
| VERIFY-11364 | Fuel Economy | FE Label | LD-FE-GL-BR153 | All of the unique Test Groups submitted in the Subconfiguration Sales Information (GL-126) that have the same Carline as the Model Type for this FE Label must be submitted as one of the Unique Carline/Subconfiguration Test Groups (GL-207). |
All of the unique Test Groups submitted in the Subconfiguration Sales Information (GL-126) that have the same Carline as the Model Type for this FE Label must be submitted as one of the Unique Carline/Subconfiguration Test Groups (GL-207). |
(GL-207) | Active | Not Under Development |
| VERIFY-11365 | Fuel Economy | FE Label | LD-FE-GL-BR154 | Test Groups listed in the Unique Carline/Subconfiguration Test Groups (GL-207) must be certified and must have one Certified Model Carline the same as the Carline of the Model Type for this FE Label. | Test Groups listed in the Unique Carline/Subconfiguration Test Groups (GL-207) must be certified and must have one Certified Model Carline the same as the Carline of the Model Type for this FE Label. | (GL-207) | Active | Not Under Development |
| VERIFY-11366 | Fuel Economy | FE Label | LD-FE-GL-BR155 | Duplicate Unique Carline/Subconfiguration Test Groups (GL-207) are not allowed. |
Duplicate Unique Carline/Subconfiguration Test Groups (GL-207) are not allowed. |
(GL-207) | Active | Not Under Development |
| VERIFY-11367 | Fuel Economy | FE Label | LD-FE-GL-BR156 | If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Smog Rating (GL-208) is required, otherwise it is optional. | If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Smog Rating (GL-208) is required, otherwise it is optional. | (GL-208) | Active | Not Under Development |
| VERIFY-11369 | Fuel Economy | FE Label | LD-FE-GL-BR158 | If Model Year (GL-3) is greater than or equal to '2013' and FE Label Calculation Approach (GL-79) equals 'PHEV' (Plug-in Hybrid Label) and Fuel Usage (GL-89) equals 'EL' (Electricity), then PHEV Composite Combined MPGe (GL-221) is required, otherwise it is optional. |
If Model Year (GL-3) is greater than or equal to '2013' and FE Label Calculation Approach (GL-79) equals 'PHEV' (Plug-in Hybrid Label) and Fuel Usage (GL-89) equals 'EL' (Electricity), then PHEV Composite Combined MPGe (GL-221) is required, otherwise it is optional. |
(GL-221) | Active | Not Under Development |
| VERIFY-11370 | Fuel Economy | FE Label | LD-FE-GL-BR159 | If Model Year (GL-3) is greater than or equal to '2013', then either Manufacturer-Calculated Amount Saved Over 5 Years (GL-210) or Manufacturer-Calculated Amount Spent Over 5 Years (GL-212) must be submitted, but not both. | If Model Year (GL-3) is greater than or equal to '2013', then either Manufacturer-Calculated Amount Saved Over 5 Years (GL-210) or Manufacturer-Calculated Amount Spent Over 5 Years (GL-212) must be submitted, but not both. | (GL-210) (GL-212) | Active | Not Under Development |
| VERIFY-11371 | Fuel Economy | FE Label | LD-FE-GL-BR160 | If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Amount Saved Over 5 Years (GL-210) must be rounded to the nearest $50. | If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Amount Saved Over 5 Years (GL-210) must be rounded to the nearest $50. | (GL-210) | Active | Not Under Development |
| VERIFY-11373 | Fuel Economy | FE Label | LD-FE-GL-BR162 | If Model Year (GL-3) is greater than or equal to '2013' and Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) is present, then Manufacturer Voluntary Higher Combined Fuel Consumption (GL-275) is required, otherwise it is optional. | If Model Year (GL-3) is greater than or equal to '2013' and Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) is present, then Manufacturer Voluntary Higher Combined Fuel Consumption (GL-275) is required, otherwise it is optional. | (GL-275) | Active | Not Under Development |
| VERIFY-11374 | Fuel Economy | FE Label | LD-FE-GL-BR163 | If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Increased Amount Spent Over 5 Years (GL-212) must be rounded to the nearest $50. |
If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Increased Amount Spent Over 5 Years (GL-212) must be rounded to the nearest $50. |
(GL-212) | Active | Not Under Development |
| VERIFY-11375 | Fuel Economy | FE Label | LD-FE-GL-BR164 | If Model Year (GL-3) is greater than or equal to '2013' and FE Label Calculation Approach (GL-79) equals 'PHEV' (Plug-in Hybrid Label) and Fuel Usage (GL-89) equals 'EL' (Electricity), then PHEV Composite Highway MPGe (GL-220) is required, otherwise it is optional. |
If Model Year (GL-3) is greater than or equal to '2013' and FE Label Calculation Approach (GL-79) equals 'PHEV' (Plug-in Hybrid Label) and Fuel Usage (GL-89) equals 'EL' (Electricity), then PHEV Composite Highway MPGe (GL-220) is required, otherwise it is optional. |
(GL-220) | Active | Not Under Development |
| VERIFY-11376 | Fuel Economy | FE Label | LD-FE-GL-BR165 | If Label Recalculation (GL-87) equals 'Y' (Yes) and there exists an active record with the same Model Type Index (GL-1), Manufacturer Code (GL-2), and Model Year (GL-3) where Label Recalculation (GL-87) equals 'N' (No), then the Release Date of the original record must be earlier than the new Release Date (GL-176). | If Label Recalculation (GL-87) equals 'Y' (Yes) and there exists an active record with the same Model Type Index (GL-1), Manufacturer Code (GL-2), and Model Year (GL-3) where Label Recalculation (GL-87) equals 'N' (No), then the Release Date of the original record must be earlier than the new Release Date (GL-176). | (GL-176) | Active | Not Under Development |
| VERIFY-11377 | Fuel Economy | FE Label | LD-FE-GL-BR166 | If Fuel Economy Label Calculation Approach (GL-79) equals 'PHEV' (Plug-in Hybrid Label), then there must be at least two values for Fuel Usage (GL-89), one of which must equal 'EL' (Electricity). |
If Fuel Economy Label Calculation Approach (GL-79) equals 'PHEV' (Plug-in Hybrid Label), then there must be at least two values for Fuel Usage (GL-89), one of which must equal 'EL' (Electricity). |
(GL-89) | Active | Not Under Development |
| VERIFY-11378 | Fuel Economy | FE Label | LD-FE-GL-BR167 | If Fuel Usage (GL-89) does not equal 'H' (Hydrogen) or 'EL' (Electricity), then only one value for Fuel Economy Value Unit (GL-90) must be present and it must equal 'MPG' (miles per gallon). |
If Fuel Usage (GL-89) does not equal 'H' (Hydrogen) or 'EL' (Electricity), then only one value for Fuel Economy Value Unit (GL-90) must be present and it must equal 'MPG' (miles per gallon). |
(GL-90) | Active | Not Under Development |
| VERIFY-11379 | Fuel Economy | FE Label | LD-FE-GL-BR168 | If Fuel Usage (GL-89) equals 'EL' (Electricity), then two values for Fuel Economy Value Unit (GL-90) must be present and must equal 'KW-HR/100Miles' (kilowatt-hour per 100 miles) and 'MPG' (miles per gallon). |
If Fuel Usage (GL-89) equals 'EL' (Electricity), then two values for Fuel Economy Value Unit (GL-90) must be present and must equal 'KW-HR/100Miles' (kilowatt-hour per 100 miles) and 'MPG' (miles per gallon). |
(GL-90) | Active | Not Under Development |
| VERIFY-11380 | Fuel Economy | FE Label | LD-FE-GL-BR169 | If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Annual Fuel Cost (GL-81) must be submitted in increments of $50. |
If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Annual Fuel Cost (GL-81) must be submitted in increments of $50. |
(GL-81) | Active | Not Under Development |
| VERIFY-11381 | Fuel Economy | FE Label | LD-FE-GL-BR170 | If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Unrounded Unadjusted Model Type City CO2 Value (GL-268) is required, otherwise it is optional. |
If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Unrounded Unadjusted Model Type City CO2 Value (GL-268) is required, otherwise it is optional. |
(GL-268) | Active | Not Under Development |
| VERIFY-11382 | Fuel Economy | FE Label | LD-FE-GL-BR171 | If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Unrounded Unadjusted Model Type Highway CO2 Value (GL-269) is required, otherwise it is optional. |
If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Unrounded Unadjusted Model Type Highway CO2 Value (GL-269) is required, otherwise it is optional. |
(GL-269) | Active | Not Under Development |
| VERIFY-11383 | Fuel Economy | FE Label | LD-FE-GL-BR172 | If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Unrounded Unadjusted Model Type Combined CO2 Value (GL-270) is required, otherwise it is optional. | If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Unrounded Unadjusted Model Type Combined CO2 Value (GL-270) is required, otherwise it is optional. | (GL-270) | Active | Not Under Development |
| VERIFY-11384 | Fuel Economy | FE Label | LD-FE-GL-BR173 | If Fuel Usage (GL-89) does not equal 'EL' (Electricity), then PHEV Composite City MPGe (GL-219) is not allowed. |
If Fuel Usage (GL-89) does not equal 'EL' (Electricity), then PHEV Composite City MPGe (GL-219) is not allowed. |
(GL-219) | Active | Not Under Development |
| VERIFY-11385 | Fuel Economy | FE Label | LD-FE-GL-BR174 | If Model Year (GL-3) is greater than or equal to '2013' and FE Label Calculation Approach (GL-79) equals 'PHEV' (Plug-in Hybrid Label) and Fuel Usage (GL-89) equals 'EL' (Electricity), then PHEV Composite City MPGe (GL-219) is required. |
If Model Year (GL-3) is greater than or equal to '2013' and FE Label Calculation Approach (GL-79) equals 'PHEV' (Plug-in Hybrid Label) and Fuel Usage (GL-89) equals 'EL' (Electricity), then PHEV Composite City MPGe (GL-219) is required. |
(GL-219) | Active | Not Under Development |
| VERIFY-11388 | Fuel Economy | FE Label | LD-FE-GL-BR176 | If Model Year (GL-3) is greater than or equal to '2013' and FE Label Calculation Approach (GL-79) equals 'PHEV' (Plug-in Hybrid Label) and Fuel Usage (GL-89) equals 'EL' (Electricity), then PHEV Total Driving Distance (GL-218) is required, otherwise it is optional. | If Model Year (GL-3) is greater than or equal to '2013' and FE Label Calculation Approach (GL-79) equals 'PHEV' (Plug-in Hybrid Label) and Fuel Usage (GL-89) equals 'EL' (Electricity), then PHEV Total Driving Distance (GL-218) is required, otherwise it is optional. | (GL-218) | Active | Not Under Development |
| VERIFY-11390 | Fuel Economy | FE Label | LD-FE-GL-BR178 | If Model Year (GL-3) is greater than or equal to '2013' and Fuel Usage (GL-89) equals 'EL' (Electricity) and the Off-Board Charge Capable Indicator (TG-8.2) of the Representative Test Group (GL-13.5) equals 'Y' (Yes), then either Charge Time (Hours) at 240 Volts (GL-216) or Charge Time (Hours) at 120 Volts (GL-217), but not both, must be present and must be greater than 0. | If Model Year (GL-3) is greater than or equal to '2013' and Fuel Usage (GL-89) equals 'EL' (Electricity) and the Off-Board Charge Capable Indicator (TG-8.2) of the Representative Test Group (GL-13.5) equals 'Y' (Yes), then either Charge Time (Hours) at 240 Volts (GL-216) or Charge Time (Hours) at 120 Volts (GL-217), but not both, must be present and must be greater than 0. | (GL-216) (GL-217) | Active | Not Under Development |
| VERIFY-11392 | Fuel Economy | FE Label | LD-FE-GL-BR180 | Warning: The FE Label has Road Load information submitted to Verify for this Model Type Index (GL-1), Manufacturer Code (GL-2) and Model Year (GL-3). Please make a correction to the Road Load if the changes made to FE Label have a reference to Road Load. | Warning: The FE Label has Road Load information submitted to Verify for this Model Type Index (GL-1), Manufacturer Code (GL-2) and Model Year (GL-3). Please make a correction to the Road Load if the changes made to FE Label have a reference to Road Load. | (GL-1) (GL-2) (GL-3) | Active | Not Under Development |
| VERIFY-11393 | Fuel Economy | FE Label | LD-FE-GL-BR181 | Maximum Ethanol Percentage (GL-104) cannot be less than '10'. |
Maximum Ethanol Percentage (GL-104) cannot be less than '10'. |
(GL-104) | Active | Not Under Development |
| VERIFY-11394 | Fuel Economy | FE Label | LD-FE-GL-BR182 | If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated 5-Cycle Rounded Adjusted Model Type City CO2 Value (GL-235) is required, otherwise it is optional. |
If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated 5-Cycle Rounded Adjusted Model Type City CO2 Value (GL-235) is required, otherwise it is optional. |
(GL-235) | Active | Not Under Development |
| VERIFY-11395 | Fuel Economy | FE Label | LD-FE-GL-BR183 | If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated 5-Cycle Rounded Adjusted Model Type Highway CO2 Value (GL-236) is required, otherwise it is optional. |
If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated 5-Cycle Rounded Adjusted Model Type Highway CO2 Value (GL-236) is required, otherwise it is optional. |
(GL-236) | Active | Not Under Development |
| VERIFY-11396 | Fuel Economy | FE Label | LD-FE-GL-BR184 | If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated 5-Cycle Rounded Adjusted Model Type Combined CO2 Value (GL-201) is required, otherwise it is optional. |
If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated 5-Cycle Rounded Adjusted Model Type Combined CO2 Value (GL-201) is required, otherwise it is optional. |
(GL-201) | Active | Not Under Development |
| VERIFY-11397 | Fuel Economy | FE Label | LD-FE-GL-BR185 | If one of the Fuel Usage (GL-89) values for this Model Type is 'E' (Ethanol), then the Maximum Ethanol Percentage (GL-104) must be equal to '85' for all Fuel Usage values (GL-89). |
If one of the Fuel Usage (GL-89) values for this Model Type is 'E' (Ethanol), then the Maximum Ethanol Percentage (GL-104) must be equal to '85' for all Fuel Usage values (GL-89). |
(GL-104) | Active | Not Under Development |
| VERIFY-11398 | Fuel Economy | FE Label | LD-FE-GL-BR186 | If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Highway Fuel Economy Label Upper Range Value (GL-171) is not allowed. |
If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Highway Fuel Economy Label Upper Range Value (GL-171) is not allowed. |
(GL-171) | Active | Not Under Development |
| VERIFY-11399 | Fuel Economy | FE Label | LD-FE-GL-BR187 | If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Highway Fuel Economy Label Lower Range Value (GL-170) is not allowed. |
If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Highway Fuel Economy Label Lower Range Value (GL-170) is not allowed. |
(GL-170) | Active | Not Under Development |
| VERIFY-11400 | Fuel Economy | FE Label | LD-FE-GL-BR188 | If Model Year (GL-3) is greater than or equal to '2013', and if Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) is present, then Manufacturer Voluntary Higher CO2 Combined Label Value (GL-276) is required, otherwise it is optional. | If Model Year (GL-3) is greater than or equal to '2013', and if Manufacturer Voluntary Lower FE or Higher Energy Consumption Combined Label Value (GL-102) is present, then Manufacturer Voluntary Higher CO2 Combined Label Value (GL-276) is required, otherwise it is optional. | (GL-276) | Active | Not Under Development |
| VERIFY-11401 | Fuel Economy | FE Label | LD-FE-GL-BR189 | If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated City Fuel Economy Label Upper Range Value (GL-169) is not allowed. |
If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated City Fuel Economy Label Upper Range Value (GL-169) is not allowed. |
(GL-169) | Active | Not Under Development |
| VERIFY-11402 | Fuel Economy | FE Label | LD-FE-GL-BR190 | If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Adjusted Combined Model Type Fuel Consumption (GL-214) is required for at least one fuel usage, otherwise it is optional. | If Model Year (GL-3) is greater than or equal to '2013', then Manufacturer-Calculated Adjusted Combined Model Type Fuel Consumption (GL-214) is required for at least one fuel usage, otherwise it is optional. | (GL-214) | Active | Not Under Development |
| VERIFY-11403 | Fuel Economy | FE Label | LD-FE-GL-BR191 | If Model Year (GL-3) is greater than or equal to '2013' and FE Label Calculation Approach (GL-79) equals 'PHEV' (Plug-in Hybrid Label), then Manufacturer-Calculated Adjusted Combined Model Type Fuel Consumption (GL-214) is required for the electricity fuel usage and at least one other fuel usage. | If Model Year (GL-3) is greater than or equal to '2013' and FE Label Calculation Approach (GL-79) equals 'PHEV' (Plug-in Hybrid Label), then Manufacturer-Calculated Adjusted Combined Model Type Fuel Consumption (GL-214) is required for the electricity fuel usage and at least one other fuel usage. | (GL-214) | Active | Not Under Development |
| VERIFY-11430 | Fuel Economy | FE Label | LD-FE-GL-BR192 | If a Configuration Index (GL-117) is between 1 and 499 (inclusive) indicating that it is a 'tested' configuration, then that configuration must contain at least one subconfiguration with a Subconfiguration Index (GL-121) between 1 and 49 (inclusive) indicating that it is a 'tested' subconfiguration. | If a Configuration Index (GL-117) is between 1 and 499 (inclusive) indicating that it is a 'tested' configuration, then that configuration must contain at least one subconfiguration with a Subconfiguration Index (GL-121) between 1 and 49 (inclusive) indicating that it is a 'tested' subconfiguration. | (GL-121) | Active | Not Under Development |
| VERIFY-11431 | Fuel Economy | FE Label | LD-FE-GL-BR193 | If a Configuration Index (GL-117) is between 500 and 999 (inclusive) indicating that it is an 'untested' configuration, then all subconfigurations contained within that configuration must have a Subconfiguration Index (GL-121) between 50 and 99 (inclusive) indicating that they are 'untested' subconfigurations. | If a Configuration Index (GL-117) is between 500 and 999 (inclusive) indicating that it is an 'untested' configuration, then all subconfigurations contained within that configuration must have a Subconfiguration Index (GL-121) between 50 and 99 (inclusive) indicating that they are 'untested' subconfigurations. | (GL-121) | Active | Not Under Development |
| VERIFY-11432 | Fuel Economy | FE Label | LD-FE-GL-BR194 | Warning: Transmission Type (GL-67) equals 'A' (Automatic) and Total Number of Transmission Gears (GL-71) equals '1.' Please check whether Transmission Type (GL-67) should be equal to 'CVT' (Continuously Variable) instead of 'A' (Automatic). | Warning: Transmission Type (GL-67) equals 'A' (Automatic) and Total Number of Transmission Gears (GL-71) equals '1.' Please check whether Transmission Type (GL-67) should be equal to 'CVT' (Continuously Variable) instead of 'A' (Automatic). | (GL-67) | Active | Not Under Development |
| VERIFY-11433 | Fuel Economy | FE Label | LD-FE-GL-BR195 | Warning: EPA has set the Model Type Suppression Indicator (GL-82) equal to 'Y' (Yes). This Model Type Index (GL-1) will be suppressed from the FE Guide. | Warning: EPA has set the Model Type Suppression Indicator (GL-82) equal to 'Y' (Yes). This Model Type Index (GL-1) will be suppressed from the FE Guide. | (GL-1) | Active | Not Under Development |
| VERIFY-11434 | Fuel Economy | FE Label | LD-FE-GL-BR196 | If Label Recalculation (GL-87) is equal to 'Y' (Yes), then the reason for relabeling must be included in the Manufacturer FE Label Comments (GL-4) field. | If Label Recalculation (GL-87) is equal to 'Y' (Yes), then the reason for relabeling must be included in the Manufacturer FE Label Comments (GL-4) field. | (GL-4) | Active | Not Under Development |
| VERIFY-11435 | Fuel Economy | FE Label | LD-FE-GL-BR197 | Warning: Unexpected value in Maximum Ethanol Percentage (GL-104) field. Value entered is greater than 15 percent and less than 85 percent; please double check the value entered and (if correct) enter an appropriate comment in Manufacturer FE Label Comments (GL-4) field confirming that the value entered is correct. If subsequent corrections are made throughout the model year, please continue to include this comment in the Manufacturer FE Label Comments field (GL-4). | Warning: Unexpected value in Maximum Ethanol Percentage (GL-104) field. Value entered is greater than 15 percent and less than 85 percent; please double check the value entered and (if correct) enter an appropriate comment in Manufacturer FE Label Comments (GL-4) field confirming that the value entered is correct. If subsequent corrections are made throughout the model year, please continue to include this comment in the Manufacturer FE Label Comments field (GL-4). | (GL-4) | Active | Not Under Development |
| VERIFY-11826 | Fuel Economy | FE Label | LD-FE-GL-BR198 | If the Manufacturer Code of the owner of the Subconfiguration Test Group (GL-126) is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the Test Group. | If the Manufacturer Code of the owner of the Subconfiguration Test Group (GL-126) is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the Test Group. | (GL-126) | Active | Not Under Development |
| VERIFY-11883 | Fuel Economy | FE Label | LD-FE-GL-BR199 | If an Engine Configuration Number (GL-25) is provided, then the Displacement (VI-22) (rounded to a tenth) of the Test Vehicle associated with the Test Number (GL-127), must be the same as the Engine Displacement (GL-26) (rounded to a tenth) of the label specified by the combination of Test Group (GL-13.5) and Engine Configuration Number (GL-25). | If an Engine Configuration Number (GL-25) is provided, then the Displacement (VI-22) (rounded to a tenth) of the Test Vehicle associated with the Test Number (GL-127), must be the same as the Engine Displacement (GL-26) (rounded to a tenth) of the label specified by the combination of Test Group (GL-13.5) and Engine Configuration Number (GL-25). | (GL-13.5) (GL-25) (GL-26) (GL-127) (VI-22) | Active | Not Under Development |
| VERIFY-11884 | Fuel Economy | FE Label | LD-FE-GL-BR200 | If an Engine Configuration Number (GL-25) is provided, then the Air Aspiration Method (VI-23) of the Test Vehicle associated with the Test Number (GL-127), must be the same as the Air Aspiration Method (GL-35) of the label specified by the combination of Test Group (GL-13.5) and Engine Configuration Number (GL-25). | If an Engine Configuration Number (GL-25) is provided, then the Air Aspiration Method (VI-23) of the Test Vehicle associated with the Test Number (GL-127), must be the same as the Air Aspiration Method (GL-35) of the label specified by the combination of Test Group (GL-13.5) and Engine Configuration Number (GL-25). | (GL-13.5) (GL-25) (GL-35) (GL-127) (VI-23) | Active | Not Under Development |
| VERIFY-12192 | Fuel Economy | FE Label | LD-FE-GL-BR201 | If the Manufacturer Code (GL-125.5) of the owner of the carline is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the Carline. | If the Manufacturer Code (GL-125.5) of the owner of the carline is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the Carline. | (GL-125.5) | Active | Not Under Development |
| VERIFY-12193 | Fuel Economy | FE Label | LD-FE-GL-BR202 | If the Manufacturer Code of the owner of the Representative Test Group (GL-13.5) is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the Test Group. | If the Manufacturer Code of the owner of the Representative Test Group (GL-13.5) is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the Test Group. | (GL-13.5) | Active | Not Under Development |
| VERIFY-12823 | Fuel Economy | FE Label | LD-FE-GL-BR203 | Test Group (GL-126) must exist in Verify as a certified Test Group. | Test Group (GL-126) must exist in Verify as a certified Test Group. | (GL-126) | Active | Not Under Development |
| VERIFY-12866 | Fuel Economy | FE Label | LD-FE-GL-BR204 | The Representative Test Group (GL-13.5) must exist in Verify as a certified Test Group. | The Representative Test Group (GL-13.5) must exist in Verify as a certified Test Group. | (GL-13.5) | Active | Not Under Development |
| VERIFY-12877 | Fuel Economy | FE Label | LD-FE-GL-BR205 | If Model Year (GL-3) is greater than or equal to '2013' and Fuel Usage (GL-89) begins with 'G' (Gasoline), then Manufacturer-Calculated Adjusted Combined Model Type Fuel Consumption (GL-214) is required for that fuel usage. | If Model Year (GL-3) is greater than or equal to '2013' and Fuel Usage (GL-89) begins with 'G' (Gasoline), then Manufacturer-Calculated Adjusted Combined Model Type Fuel Consumption (GL-214) is required for that fuel usage. | (GL-214) | Active | Not Under Development |
| VERIFY-14843 | Fuel Economy | FE Label | LD-FE-GL-BR206 | If the Analytically-Derived FE / CREE Indicator (TI-13.5) of the Test Number (GL-127) is equal to 'N' (No) and at least one of the following is true: 1) Total Road Load Horsepower (GL-122) is greater than the tested vehicle's EPA-Calculated Total Road Load Horsepower (VI-43.5), or 2) Equivalent Test Weight (ETW) (GL-123) is greater than the tested vehicle's ETW (VI-30), or 3) Axle Ratio (GL-120) is greater than the tested vehicle's Axle Ratio (VI-35), then N/V Ratio (GL-281) is required. Otherwise, it is optional. |
If the Analytically-Derived FE / CREE Indicator (TI-13.5) of the Test Number (GL-127) is equal to 'N' (No) and at least one of the following is true: 1) Total Road Load Horsepower (GL-122) is greater than the tested vehicle's EPA-Calculated Total Road Load Horsepower (VI-43.5), or 2) Equivalent Test Weight (ETW) (GL-123) is greater than the tested vehicle's ETW (VI-30), or 3) Axle Ratio (GL-120) is greater than the tested vehicle's Axle Ratio (VI-35), then N/V Ratio (GL-281) is required. Otherwise, it is optional. |
(GL-281) | Active | Not Under Development |
| VERIFY-10295 | Fuel Economy | Footprint | LD-FE-FT-BR001 | Each footprint record within the same submission must be a unique combination of 'Footprint Description' (FT-6), 'Wheelbase (inches)' (FT-7), 'Front Track Width (inches)' (FT-8), and 'Rear Track Width (inches)' (FT-9) for the same Model Year (FT-2), Division Code (FT-3), Carline Code (FT-4), and Carline Manufacturer Code (FT-1). | Each footprint record within the same submission must be a unique combination of 'Footprint Description' (FT-6), 'Wheelbase (inches)' (FT-7), 'Front Track Width (inches)' (FT-8), and 'Rear Track Width (inches)' (FT-9) for the same Model Year (FT-2), Division Code (FT-3), Carline Code (FT-4), and Carline Manufacturer Code (FT-1). | (FT-6) (FT-7) (FT-8) (FT-9) | Active | Not Under Development |
| VERIFY-10296 | Fuel Economy | Footprint | LD-FE-FT-BR002 | A new Footprint record with a Footprint Index that is blank cannot be the same combination of 'Footprint Description' (FT-6), 'Wheelbase (inches)' (FT-7), 'Front Track Width (inches)' (FT-8), and 'Rear Track Width (inches)' (FT-9) as a previously submitted footprint for the same Model Year (FT-2), Division Code (FT-3), Carline Code (FT-4), and Carline Manufacturer Code (FT-1). |
A new Footprint record with a Footprint Index that is blank cannot be the same combination of 'Footprint Description' (FT-6), 'Wheelbase (inches)' (FT-7), 'Front Track Width (inches)' (FT-8), and 'Rear Track Width (inches)' (FT-9) as a previously submitted footprint for the same Model Year (FT-2), Division Code (FT-3), Carline Code (FT-4), and Carline Manufacturer Code (FT-1). |
(FT-1) (FT-2) (FT-3) (FT-4) (FT-6) (FT-7) (FT-8) (FT-9) | Active | Not Under Development |
| VERIFY-10491 | Fuel Economy | Footprint | LD-FE-FT-BR003 | If Process Code (FT-0.5) equals 'R' (Report), then the Manufacturer Code of the Submission Author Details must be the same as the Carline Manufacturer Code (FT-1). | If Process Code (FT-0.5) equals 'R' (Report), then the Manufacturer Code of the Submission Author Details must be the same as the Carline Manufacturer Code (FT-1). | (FT-0.7) (FT-1) | Active | Not Under Development |
| VERIFY-9915 | Fuel Economy | Footprint | LD-FE-FT-BR004 | The Manufacturer Code of the Submission Author Details must be the same as the Carline Manufacturer Code (FT-1). | The Manufacturer Code of the Submission Author Details must be the same as the Carline Manufacturer Code (FT-1). | (FT-0.7) (FT-1) | Active | Not Under Development |
| VERIFY-9456 | Fuel Economy | Footprint | LD-FE-FT-BR005 | If Process Code (FT-0.5) equals 'C' (Correction) then a record must already exist in the system with the same Carline Manufacturer Code (FT-1), Model Year (FT-2), Division Code (FT-3), and Carline Code (FT-4). | If Process Code (FT-0.5) equals 'C' (Correction) then a record must already exist in the system with the same Carline Manufacturer Code (FT-1), Model Year (FT-2), Division Code (FT-3), and Carline Code (FT-4). | (FT-1) (FT-2) (FT-3) (FT-4) | Active | Not Under Development |
| VERIFY-9454 | Fuel Economy | Footprint | LD-FE-FT-BR006 | If Process Code (FT-0.5) equals 'N' (New) then a record must not exist in the system with the same Carline Manufacturer Code (FT-1), Model Year (FT-2), Division Code (FT-3), and Carline Code (FT-4). | If Process Code (FT-0.5) equals 'N' (New) then a record must not exist in the system with the same Carline Manufacturer Code (FT-1), Model Year (FT-2), Division Code (FT-3), and Carline Code (FT-4). | (FT-1) (FT-2) (FT-3) (FT-4) | Active | Not Under Development |
| VERIFY-9735 | Fuel Economy | Footprint | LD-FE-FT-BR007 | If Process Code (FT-0.5) equals 'R' (Report), then a record must already exist in the system with the same Carline Manufacturer Code (FT-1), Model Year (FT-2), Division Code (FT-3), and Carline Code (FT-4). | If Process Code (FT-0.5) equals 'R' (Report), then a record must already exist in the system with the same Carline Manufacturer Code (FT-1), Model Year (FT-2), Division Code (FT-3), and Carline Code (FT-4). | (FT-1) (FT-2) (FT-3) (FT-4) | Active | Not Under Development |
| VERIFY-9740 | Fuel Economy | Footprint | LD-FE-FT-BR008 | Carline Manufacturer Code (FT-1) must exist in the system. | Carline Manufacturer Code (FT-1) must exist in the system. | (FT-1) | Active | Not Under Development |
| VERIFY-10292 | Fuel Economy | Footprint | LD-FE-FT-BR009 | For a Footprint submission, the Carline must already exist in the system with the same Carline Manufacturer Code (FT-1), Model Year (FT-2), Division Code (FT-3), and Carline Code (FT-4). | For a Footprint submission, the Carline must already exist in the system with the same Carline Manufacturer Code (FT-1), Model Year (FT-2), Division Code (FT-3), and Carline Code (FT-4). | (FT-1) (FT-2) (FT-3) (FT-4) | Active | Not Under Development |
| VERIFY-10293 | Fuel Economy | Footprint | LD-FE-FT-BR010 | If Process Code (FT-0.5) is 'N' (New) then Footprint Index (FT-5) is not allowed. | If Process Code (FT-0.5) is 'N' (New) then Footprint Index (FT-5) is not allowed. | (FT-5) | Active | Not Under Development |
| VERIFY-10294 | Fuel Economy | Footprint | LD-FE-FT-BR011 | If Process Code (FT-0.5) is 'C' (Correction) and Footprint Index (FT-5) is not blank, then a Footprint Record must already exist in the system with the same Carline Manufacturer Code (FT-1), Model Year (FT-2), Division Code (FT-3), Carline Code (FT-4) and Footprint Index (FT-5). | If Process Code (FT-0.5) is 'C' (Correction) and Footprint Index (FT-5) is not blank, then a Footprint Record must already exist in the system with the same Carline Manufacturer Code (FT-1), Model Year (FT-2), Division Code (FT-3), Carline Code (FT-4) and Footprint Index (FT-5). | (FT-1) (FT-2) (FT-3) (FT-4) (FT-5) | Active | Not Under Development |
| VERIFY-10492 | Fuel Economy | Footprint | LD-FE-FT-BR012 | If Process Code (FT-0.5) equals 'D' (Delete), then the Manufacturer Code of the Submission Author Details must be the same as the Carline Manufacturer Code (FT-1). | If Process Code (FT-0.5) equals 'D' (Delete), then the Manufacturer Code of the Submission Author Details must be the same as the Carline Manufacturer Code (FT-1). | (FT-0.7) (FT-1) | Active | Not Under Development |
| VERIFY-10297 | Fuel Economy | Footprint | LD-FE-FT-BR013 | If Process Code (FT-0.5) is 'D' (Delete) then at least one active footprint record must exist for the same Carline Manufacturer Code (FT-1), Model Year (FT-2), Division Code (FT-3), and Carline Code (FT-4). | If Process Code (FT-0.5) is 'D' (Delete) then at least one active footprint record must exist for the same Carline Manufacturer Code (FT-1), Model Year (FT-2), Division Code (FT-3), and Carline Code (FT-4). | (FT-1) (FT-2) (FT-3) (FT-4) | Active | Not Under Development |
| VERIFY-10298 | Fuel Economy | Footprint | LD-FE-FT-BR014 | If Process Code (FT-0.5) is 'D' (Delete) then the Carline associated with the Carline Manufacturer Code (FT-1), Model Year (FT-2), Division Code (FT-3), and Carline Code (FT-4) must not have been used in any active CAFE dataset. | If Process Code (FT-0.5) is 'D' (Delete) then the Carline associated with the Carline Manufacturer Code (FT-1), Model Year (FT-2), Division Code (FT-3), and Carline Code (FT-4) must not have been used in any active CAFE dataset. | (FT-1) (FT-2) (FT-3) (FT-4) | Active | Not Under Development |
| VERIFY-10798 | Fuel Economy | Footprint | LD-FE-FT-BR015 | If Model Year (FT-2) is greater than or equal to 2012, then Manufacturer Footprint Target GHG Value Rounded to One Decimal Place (grams per mile) (FT-16) is required. Otherwise, it is optional. | If Model Year (FT-2) is greater than or equal to 2012, then Manufacturer Footprint Target GHG Value Rounded to One Decimal Place (grams per mile) (FT-16) is required. Otherwise, it is optional. | (FT-16) | Active | Not Under Development |
| VERIFY-10829 | Fuel Economy | Footprint | LD-FE-FT-BR016 | If Process Code (FT-0.5) is 'C' (Correction) then each Footprint Index Number (FT-5), if present, must be unique. | If Process Code (FT-0.5) is 'C' (Correction) then each Footprint Index Number (FT-5), if present, must be unique. | (FT-5) | Active | Not Under Development |
| VERIFY-17514 | Fuel Economy | Footprint | LD-FE-FT-BR017 | The Manufacturer Code of the Submission Author Details must be the same as the EPA Manufacturer Code (FT-0.7). | The Manufacturer Code of the Submission Author Details must be the same as the EPA Manufacturer Code (FT-0.7). | (FT-0.7) | Active | Not Under Development |
| VERIFY-13927 | Fuel Economy | Footprint | LD-FE-FT-BR018 | If FE Label Carline Class Code (CL-5) equals '30' (Small 2WD SUV), then Footprint Vehicle Type (FT-37) is required. | If FE Label Carline Class Code (CL-5) equals '30' (Small 2WD SUV), then Footprint Vehicle Type (FT-37) is required. | (FT-37) | Active | Not Under Development |
| VERIFY-4937 | Fuel Economy | Road Load | LD-FE-RL-BR001 | If Process Code (RL-0.5) equals 'N' (New) or 'C' (Correction), then the Manufacturer Code (RL-1) must match the manufacturer code in the Submission Author Details. | If Process Code (RL-0.5) equals 'N' (New) or 'C' (Correction), then the Manufacturer Code (RL-1) must match the manufacturer code in the Submission Author Details. | (RL-1) | Active | Not Under Development |
| VERIFY-4938 | Fuel Economy | Road Load | LD-FE-RL-BR002 | Manufacturer Code (RL-1) must exist in Verify. |
Manufacturer Code (RL-1) must exist in Verify. |
(RL-1) | Active | Not Under Development |
| VERIFY-4940 | Fuel Economy | Road Load | LD-FE-RL-BR003 | If Process Code (RL-0.5) equals 'R' (Report) or 'D' (Delete), then a Road Load must already exist in Verify for the same Road Load Index (RL-1.5), Model Year (RL-1.6), FE Label Manufacturer Code (RL-1.8), and FE Label Model Type Index (RL-2). |
If Process Code (RL-0.5) equals 'R' (Report) or 'D' (Delete), then a Road Load must already exist in Verify for the same Road Load Index (RL-1.5), Model Year (RL-1.6), FE Label Manufacturer Code (RL-1.8), and FE Label Model Type Index (RL-2). |
(RL-1.5) (RL-1.6) (RL-1.8) (RL-2) | Active | Not Under Development |
| VERIFY-4941 | Fuel Economy | Road Load | LD-FE-RL-BR004a | Manufacturer-Calculated Total Road Load Horsepower (RL-22) must equal the EPA-calculated Total Road Load Horsepower (RL-23) after both have been rounded to '0.1'. | Manufacturer-Calculated Total Road Load Horsepower (RL-22) must equal the EPA-calculated Total Road Load Horsepower (RL-23) after both have been rounded to '0.1'. | (RL-22) (RL-23) | Active | Not Under Development |
| VERIFY-11576 | Fuel Economy | Road Load | LD-FE-RL-BR004b | Manufacturer-Calculated Total Road Load Horsepower (RL-22) must equal the EPA-Calculated Total Road Load Horsepower (RL-23) after both have been rounded to '0.1'. (Manufacturer-Calculated Total Road Load Horsepower (RL-22) refers to Total Road Load Horsepower (GL-122) in the specified FE Label). | Manufacturer-Calculated Total Road Load Horsepower (RL-22) must equal the EPA-Calculated Total Road Load Horsepower (RL-23) after both have been rounded to '0.1'. (Manufacturer-Calculated Total Road Load Horsepower (RL-22) refers to Total Road Load Horsepower (GL-122) in the specified FE Label). | (RL-22) (RL-23) (GL-122) | Active | Not Under Development |
| VERIFY-11577 | Fuel Economy | Road Load | LD-FE-RL-BR005 | If Process Code (RL-0.5) equals 'C' (Correction), then a Road Load record must already exist in Verify for the same Road Load Index (RL-1.5), Model Year (RL-1.6), FE Label Manufacturer Code (RL-1.8), and FE Label Model Type Index (RL-2). |
If Process Code (RL-0.5) equals 'C' (Correction), then a Road Load record must already exist in Verify for the same Road Load Index (RL-1.5), Model Year (RL-1.6), FE Label Manufacturer Code (RL-1.8), and FE Label Model Type Index (RL-2). |
(RL-1.5) (RL-1.6) (RL-1.8) (RL-2) | Active | Not Under Development |
| VERIFY-11578 | Fuel Economy | Road Load | LD-FE-RL-BR006 | If Process Code (RL-0.5) equals 'N' (New), then an FE Label record must already exist in Verify for the same Model Year (RL-1.6), FE Label Manufacturer Code (RL-1.8), and FE Label Model Type Index (RL-2). |
If Process Code (RL-0.5) equals 'N' (New), then an FE Label record must already exist in Verify for the same Model Year (RL-1.6), FE Label Manufacturer Code (RL-1.8), and FE Label Model Type Index (RL-2). |
(RL-1.6) (RL-1.8) (RL-2) | Active | Not Under Development |
| VERIFY-11579 | Fuel Economy | Road Load | LD-FE-RL-BR007 | If FE Label Subconfiguration Reference Indicator (RL-1.7) equals 'Y' (Yes), then a Subconfiguration must exist in Verify for the same FE Label Base Level Index (RL-2.1), FE Label Configuration Index (RL-2.2) and FE Label Subconfiguration Index (RL-3) in the FE Label specified by the Model Year (RL-1.6), FE Label Manufacturer Code (RL-1.8), and FE Label Model Type Index (RL-2). |
If FE Label Subconfiguration Reference Indicator (RL-1.7) equals 'Y' (Yes), then a Subconfiguration must exist in Verify for the same FE Label Base Level Index (RL-2.1), FE Label Configuration Index (RL-2.2) and FE Label Subconfiguration Index (RL-3) in the FE Label specified by the Model Year (RL-1.6), FE Label Manufacturer Code (RL-1.8), and FE Label Model Type Index (RL-2). |
(RL-2.1) (RL-2.2) (RL-3) | Active | Not Under Development |
| VERIFY-11580 | Fuel Economy | Road Load | LD-FE-RL-BR008 | The Manufacturer Code of the Submission Author Details must be the same as the FE Label Manufacturer Code (RL-1.8). |
The Manufacturer Code of the Submission Author Details must be the same as the FE Label Manufacturer Code (RL-1.8). |
(RL-1.8) | Active | Not Under Development |
| VERIFY-11583 | Fuel Economy | Road Load | LD-FE-RL-BR009 | FE Label Manufacturer Code (RL-1.8) must exist in Verify. |
FE Label Manufacturer Code (RL-1.8) must exist in Verify. |
(RL-1.8) | Active | Not Under Development |
| VERIFY-11584 | Fuel Economy | Road Load | LD-FE-RL-BR010 | If Process Code (RL-0.5) equals 'R' (Report) or 'D' (Delete), then the Manufacturer Code of the Submission Author Details must be the same as the FE Label Manufacturer Code (RL-1.8). |
If Process Code (RL-0.5) equals 'R' (Report) or 'D' (Delete), then the Manufacturer Code of the Submission Author Details must be the same as the FE Label Manufacturer Code (RL-1.8). |
(RL-1.8) | Active | Not Under Development |
| VERIFY-11585 | Fuel Economy | Road Load | LD-FE-RL-BR011 | If FE Label Subconfiguration Reference Indicator (RL-1.7) equals 'Y' (Yes), then FE Label Base Level Index (RL-2.1), FE Label Configuration Index (RL-2.2) and FE Label Subconfiguration Index (RL-3) are required, otherwise they are not allowed. |
If FE Label Subconfiguration Reference Indicator (RL-1.7) equals 'Y' (Yes), then FE Label Base Level Index (RL-2.1), FE Label Configuration Index (RL-2.2) and FE Label Subconfiguration Index (RL-3) are required, otherwise they are not allowed. |
(RL-2.1) (RL-2.2) (RL-3) | Active | Not Under Development |
| VERIFY-11586 | Fuel Economy | Road Load | LD-FE-RL-BR012 | Test Group Name (RL-4) must exist in Verify as a certified Test Group. |
Test Group Name (RL-4) must exist in Verify as a certified Test Group. |
(RL-4) | Active | Not Under Development |
| VERIFY-11587 | Fuel Economy | Road Load | LD-FE-RL-BR013 | If FE Label Subconfiguration Reference Indicator (RL-1.7) equals 'N' (No), then Test Group (RL-4), Engine Code (RL-5), Axle Ratio (RL-15), ETW (RL-21), and Manufacturer-Calculated Total Road Load Horsepower (RL-22) are required, otherwise they are not allowed. |
If FE Label Subconfiguration Reference Indicator (RL-1.7) equals 'N' (No), then Test Group (RL-4), Engine Code (RL-5), Axle Ratio (RL-15), ETW (RL-21), and Manufacturer-Calculated Total Road Load Horsepower (RL-22) are required, otherwise they are not allowed. |
(RL-4) (RL-5) (RL-15) (RL-21) (RL-22) | Active | Not Under Development |
| VERIFY-11656 | Fuel Economy | Road Load | LD-FE-RL-BR015 | If Process Code (RL-0.5) equals 'D' (Delete), then Deletion Reason (RL-28) is required, otherwise it is optional. | If Process Code (RL-0.5) equals 'D' (Delete), then Deletion Reason (RL-28) is required, otherwise it is optional. | (RL-28) | Active | Not Under Development |
| VERIFY-11667 | Fuel Economy | Road Load | LD-FE-RL-BR016 | If Process Code (RL-0.5) equals 'N' (New), then a record must not exist in Verify for the same FE Label Manufacturer Code (RL-1.8), Model Year (RL-1.6), FE Label Model Type Index (RL-2) and Road Load Index (RL-1.5). | If Process Code (RL-0.5) equals 'N' (New), then a record must not exist in Verify for the same FE Label Manufacturer Code (RL-1.8), Model Year (RL-1.6), FE Label Model Type Index (RL-2) and Road Load Index (RL-1.5). | (RL-1.5) (RL-1.6) (RL-1.8) (RL-2) | Active | Not Under Development |
| VERIFY-12191 | Fuel Economy | Road Load | LD-FE-RL-BR017 | If the Manufacturer Code of the owner of the Test Group (RL-4) is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the Test Group. | If the Manufacturer Code of the owner of the Test Group (RL-4) is different than the Submitter's Manufacturer Code (in Submission Author Details), then permission must be granted by the Owner Manufacturer for the Submitting Manufacturer to use the Test Group. | (RL-4) | Active | Not Under Development |
| VERIFY-4724 | IUVP | IUVP Test Information | LD-IUVP-IT-BR001a | If Process Code (IT-1) is equal to 'R' (Report) or 'C' (Correction) or 'D' (Delete), then an active record must exist in the system with the same Manufacturer Code (IT-2), VIN (IT-3), Emission Program (IT-4) and Mileage Category (IT-38), and Test Number (IT-5). | If Process Code (IT-1) is equal to 'R' (Report) or 'C' (Correction) or 'D' (Delete), then an active record must exist in the system with the same Manufacturer Code (IT-2), VIN (IT-3), Emission Program (IT-4) and Mileage Category (IT-38), and Test Number (IT-5). | (IT-2) (IT-3) (IT-4) (IT-38) (IT-5) | Active | Not Under Development |
| VERIFY-4920 | IUVP | IUVP Test Information | LD-IUVP-IT-BR001b | If Process Code (IT-1) is equal to 'R' (Report) or 'C' (Correction) or 'D' (Delete), then an active record must exist in the system with the same Manufacturer Code (IT-2), VIN (IT-3), Emission Program (IT-4) and Mileage Category (IT-38), and Test Number (IT-5). | If Process Code (IT-1) is equal to 'R' (Report) or 'C' (Correction) or 'D' (Delete), then an active record must exist in the system with the same Manufacturer Code (IT-2), VIN (IT-3), Emission Program (IT-4) and Mileage Category (IT-38), and Test Number (IT-5). | (IT-2) (IT-3) (IT-4) (IT-38) (IT-5) | Active | Not Under Development |
| VERIFY-4584 | IUVP | IUVP Test Information | LD-IUVP-IT-BR003a | An active Vehicle Information dataset must exist in the system with the same Manufacturer Code (IT-2), VIN (IT-3), Emission Program (IT-4), and Mileage Category (IT-38). | An active Vehicle Information dataset must exist in the system with the same Manufacturer Code (IT-2), VIN (IT-3), Emission Program (IT-4), and Mileage Category (IT-38). | (IT-2) (IT-3) (IT-4) (IT-38) | Active | Not Under Development |
| VERIFY-4917 | IUVP | IUVP Test Information | LD-IUVP-IT-BR003b | An active Vehicle Information dataset must exist in the system with the same Manufacturer Code (IT-2), VIN (IT-3), Emission Program (IT-4), and Mileage Category (IT-38). | An active Vehicle Information dataset must exist in the system with the same Manufacturer Code (IT-2), VIN (IT-3), Emission Program (IT-4), and Mileage Category (IT-38). | (IT-2) (IT-3) (IT-4) (IT-38) | Active | Not Under Development |
| VERIFY-4932 | IUVP | IUVP Test Information | LD-IUVP-IT-BR004a | Manufacturer Code (IT-2) must exist in the system. | Manufacturer Code (IT-2) must exist in the system. | (IT-2) | Active | Not Under Development |
| VERIFY-4854 | IUVP | IUVP Test Information | LD-IUVP-IT-BR004b | Manufacturer Code (IT-2) must exist in the system. | Manufacturer Code (IT-2) must exist in the system. | (IT-2) | Active | Not Under Development |
| VERIFY-4735 | IUVP | IUVP Test Information | LD-IUVP-IT-BR005a | If the Emission Program (IT-4) is equal to 'R1' (EPA In-Use Surveillance Testing (EPA only)), 'R2' (EPA In-Use Confirmatory Testing (EPA only)), 'C1' (California In-Use confirmatory testing Phase 1), or 'C2' (California In-Use confirmatory testing Phase 2), then the Manufacturer Code (IT-2) of the Submission Author Details must be 'EPA' or 'ARB' or 'LOD'. | If the Emission Program (IT-4) is equal to 'R1' (EPA In-Use Surveillance Testing (EPA only)), 'R2' (EPA In-Use Confirmatory Testing (EPA only)), 'C1' (California In-Use confirmatory testing Phase 1), or 'C2' (California In-Use confirmatory testing Phase 2), then the Manufacturer Code (IT-2) of the Submission Author Details must be 'EPA' or 'ARB' or 'LOD'. | (IT-2) | Active | Not Under Development |
| VERIFY-4842 | IUVP | IUVP Test Information | LD-IUVP-IT-BR005b | If the Emission Program (IT-4) is equal to 'R1' (EPA In-Use Surveillance Testing (EPA only)), 'R2' (EPA In-Use Confirmatory Testing (EPA only)), 'C1' (California In-Use Confirmatory Testing Phase 1), or 'C2' (California In-Use Confirmatory Testing Phase 2), then the Manufacturer Code (IT-2) of the Submission Author Details must be 'EPA' or 'ARB' or 'LOD'. | If the Emission Program (IT-4) is equal to 'R1' (EPA In-Use Surveillance Testing (EPA only)), 'R2' (EPA In-Use Confirmatory Testing (EPA only)), 'C1' (California In-Use Confirmatory Testing Phase 1), or 'C2' (California In-Use Confirmatory Testing Phase 2), then the Manufacturer Code (IT-2) of the Submission Author Details must be 'EPA' or 'ARB' or 'LOD'. | (IT-2) | Active | Not Under Development |
| VERIFY-4630 | IUVP | IUVP Test Information | LD-IUVP-IT-BR006a | If the Process Code (IT-1) is equal to 'R' (Report) or 'C' (Correction) or 'D' (Delete), then Test Number (IT-5) is required; otherwise it is not allowed. | If the Process Code (IT-1) is equal to 'R' (Report) or 'C' (Correction) or 'D' (Delete), then Test Number (IT-5) is required; otherwise it is not allowed. | (IT-5) | Active | Not Under Development |
| VERIFY-4857 | IUVP | IUVP Test Information | LD-IUVP-IT-BR006b | If the Process Code (IT-1) is equal to 'R' (Report) or 'C' (Correction) or 'D' (Delete), then Test Number (IT-5) is required; otherwise, it is not allowed. | If the Process Code (IT-1) is equal to 'R' (Report) or 'C' (Correction) or 'D' (Delete), then Test Number (IT-5) is required; otherwise, it is not allowed. | (IT-5) | Active | Not Under Development |
| VERIFY-4817 | IUVP | IUVP Test Information | LD-IUVP-IT-BR006c | If the Process Code (IT-1) is equal to 'R' (Report) or 'C' (Correction) or 'D' (Delete), then Test Number (IT-5) is required; otherwise, it is not allowed. | If the Process Code (IT-1) is equal to 'R' (Report) or 'C' (Correction) or 'D' (Delete), then Test Number (IT-5) is required; otherwise, it is not allowed. | (IT-5) | Active | Not Under Development |
| VERIFY-4594 | IUVP | IUVP Test Information | LD-IUVP-IT-BR007 | The Test Laboratory Code (IT-7) must be valid. | The Test Laboratory Code (IT-7) must be valid. | (IT-7) | Active | Not Under Development |
| VERIFY-4820 | IUVP | IUVP Test Information | LD-IUVP-IT-BR008 | If the Weighted Result (IT-29) is greater than the Federal In-Use Standard (IT-31), then the Federal Pass/Fail/Void Status (IT-10) must equal 'F' (Fail) or 'V' (Void). | If the Weighted Result (IT-29) is greater than the Federal In-Use Standard (IT-31), then the Federal Pass/Fail/Void Status (IT-10) must equal 'F' (Fail) or 'V' (Void). | (IT-10) | Active | Not Under Development |
| VERIFY-4586 | IUVP | IUVP Test Information | LD-IUVP-IT-BR009 | If the Weighted Result (IT-29) is greater than the California In-Use Standard (IT-32), then the California Pass/Fail/Void Status (IT-11) must equal 'F' (Fail) or 'V' (Void). | If the Weighted Result (IT-29) is greater than the California In-Use Standard (IT-32), then the California Pass/Fail/Void Status (IT-11) must equal 'F' (Fail) or 'V' (Void). | (IT-11) | Active | Not Under Development |
| VERIFY-4608 | IUVP | IUVP Test Information | LD-IUVP-IT-BR010 | If the Federal Pass/Fail/Void Status (IT-10) is equal to 'F' (Fail) or 'V' (Void), then Test Comments (IT-37) is required. | If the Federal Pass/Fail/Void Status (IT-10) is equal to 'F' (Fail) or 'V' (Void), then Test Comments (IT-37) is required. | (IT-37) | Active | Not Under Development |
| VERIFY-4863 | IUVP | IUVP Test Information | LD-IUVP-IT-BR011 | If the California Pass/Fail/Void Status (IT-10) is equal to 'F' (Fail) or 'V' (Void), then Test Comments (IT-37) is required. | If the California Pass/Fail/Void Status (IT-10) is equal to 'F' (Fail) or 'V' (Void), then Test Comments (IT-37) is required. | (IT-37) | Active | Not Under Development |
| VERIFY-4886 | IUVP | IUVP Test Information | LD-IUVP-IT-BR012 | The Test Date (IT-12) must not be greater than the submission date. | The Test Date (IT-12) must not be greater than the submission date. | (IT-12) | Active | Not Under Development |
| VERIFY-4799 | IUVP | IUVP Test Information | LD-IUVP-IT-BR013 | If the Test Condition (IT-13) is equal to 'SS' (Set to Spec), then the Manufacturer Code (IT-2) of the Submission Author Details must be 'EPA' or 'ARB' or 'LOD'. | If the Test Condition (IT-13) is equal to 'SS' (Set to Spec), then the Manufacturer Code (IT-2) of the Submission Author Details must be 'EPA' or 'ARB' or 'LOD'. | (IT-2) | Active | Not Under Development |
| VERIFY-4602 | IUVP | IUVP Test Information | LD-IUVP-IT-BR014 | If the Test Condition (IT-13) is equal to 'AM' (After Maintenance), then Test Comments (IT-37) is required. | If the Test Condition (IT-13) is equal to 'AM' (After Maintenance), then Test Comments (IT-37) is required. | (IT-37) | Active | Not Under Development |
| VERIFY-4727 | IUVP | IUVP Test Information | LD-IUVP-IT-BR015 | If Process Code (IT-1) is 'D' (Delete), then Deletion Reason (IT-39) is required. | If Process Code (IT-1) is 'D' (Delete), then Deletion Reason (IT-39) is required. | (IT-39) | Active | Not Under Development |
| VERIFY-4880 | IUVP | IUVP Test Information | LD-IUVP-IT-BR016 | If the category of the Test Procedure (IT-14) is 'FTP' (Test Procedure equal to '2', '11', '21', '25', '31', '35', '41', '45', '51', '52', '80', or '81'), then Bag 1 Result (IT-33), Bag 2 Result (IT-34), and Bag 3 Result (IT-35) are required. | If the category of the Test Procedure (IT-14) is 'FTP' (Test Procedure equal to '2', '11', '21', '25', '31', '35', '41', '45', '51', '52', '80', or '81'), then Bag 1 Result (IT-33), Bag 2 Result (IT-34), and Bag 3 Result (IT-35) are required. | (IT-33) (IT-34) (IT-35) | Active | Not Under Development |
| VERIFY-4589 | IUVP | IUVP Test Information | LD-IUVP-IT-BR017 | If the category of the Test Procedure (IT-14) is 'FTP' (Test Procedure equal to '2', '11', '21', '25', '31', '35', '41', '45', '51', '52', '80', or '81') and the test vehicle is a hybrid (Drive Source (TG-7) equals 'H' (Hybrid)), then Bag 4 Result (IT-36) is required. | If the category of the Test Procedure (IT-14) is 'FTP' (Test Procedure equal to '2', '11', '21', '25', '31', '35', '41', '45', '51', '52', '80', or '81') and the test vehicle is a hybrid (Drive Source (TG-7) equals 'H' (Hybrid)), then Bag 4 Result (IT-36) is required. | (IT-36) (TG-7) | Active | Not Under Development |
| VERIFY-4813 | IUVP | IUVP Test Information | LD-IUVP-IT-BR018 | IUVP Test Information can only be accepted within the allowed time range of submissions for the Model Year (IV-8) of the test vehicle and the Mileage Category (IT-38). | IUVP Test Information can only be accepted within the allowed time range of submissions for the Model Year (IV-8) of the test vehicle and the Mileage Category (IT-38). | (IV-8) (IT-38) | Active | Not Under Development |
| VERIFY-4822 | IUVP | IUVP Test Information | LD-IUVP-IT-BR019a | Test Date (IT-12) must be greater than the Build Date (IV-33) of the vehicle. | Test Date (IT-12) must be greater than the Build Date (IV-33) of the vehicle. | (IV-33) (IT-12) | Active | Not Under Development |
| VERIFY-4572 | IUVP | IUVP Test Information | LD-IUVP-IT-BR019b | Test Date (IT-12) must be greater than the Build Date (IV-33) of the vehicle. | Test Date (IT-12) must be greater than the Build Date (IV-33) of the vehicle. | (IV-33) (IT-12) | Active | Not Under Development |
| VERIFY-4796 | IUVP | IUVP Test Information | LD-IUVP-IT-BR020 | Test Procedure Codes (IT-14) of '51', '52', '80', '81', '82', or '83' are not allowed. | Test Procedure Codes (IT-14) of '51', '52', '80', '81', '82', or '83' are not allowed. | (IT-14) | Active | Not Under Development |
| VERIFY-4855 | IUVP | IUVP Test Information | LD-IUVP-IT-BR021 | Test Result/Emission Names (IT-28) of 'FE BAG 1', 'FE BAG 2', 'FE BAG 3', and 'FE BAG 4' are not allowed. | Test Result/Emission Names (IT-28) of 'FE BAG 1', 'FE BAG 2', 'FE BAG 3', and 'FE BAG 4' are not allowed. | (IT-28) | Active | Not Under Development |
| VERIFY-4752 | IUVP | IUVP Test Information | LD-IUVP-IT-BR022 | If the Test Procedure (IT-14) is an ORVR (24 or 44) or Running Loss (32 or 37) test, then a Test Result/Emission Name (IT-28) of 'HC-TOTAL' is not allowed. | If the Test Procedure (IT-14) is an ORVR (24 or 44) or Running Loss (32 or 37) test, then a Test Result/Emission Name (IT-28) of 'HC-TOTAL' is not allowed. | (IT-28) | Active | Not Under Development |
| VERIFY-4619 | IUVP | IUVP Test Information | LD-IUVP-IT-BR023 | The Test Result/Emission Name (IT-28) of 'HC' is only allowed for ORVR (Test Procedure (IT-14) equal to 24 or 44) or Running Loss (Test Procedure (IT-14) equal to 32 or 37) tests. | The Test Result/Emission Name (IT-28) of 'HC' is only allowed for ORVR (Test Procedure (IT-14) equal to 24 or 44) or Running Loss (Test Procedure (IT-14) equal to 32 or 37) tests. | (IT-28) | Active | Not Under Development |
| VERIFY-12675 | IUVP | IUVP Test Information | LD-IUVP-IT-BR024 | If the Emission Program (IT-4) is not equal to 'R1' (EPA In-Use Surveillance Testing (EPA only)), 'R2' (EPA In-Use Confirmatory Testing (EPA only)), 'C1' (California In-Use confirmatory testing Phase 1), or 'C2' (California In-Use confirmatory testing Phase 2), then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (IT-2) of the dataset. | If the Emission Program (IT-4) is not equal to 'R1' (EPA In-Use Surveillance Testing (EPA only)), 'R2' (EPA In-Use Confirmatory Testing (EPA only)), 'C1' (California In-Use confirmatory testing Phase 1), or 'C2' (California In-Use confirmatory testing Phase 2), then the Manufacturer Code of the Submission Author Details must match the Manufacturer Code (IT-2) of the dataset. | (IT-2) | Active | Not Under Development |
| VERIFY-12676 | IUVP | IUVP Test Information | LD-IUVP-IT-BR025 | The Manufacturer Code of the Submission Author Details must match the Manufacturer Code (IT-2) of the requested dataset. | The Manufacturer Code of the Submission Author Details must match the Manufacturer Code (IT-2) of the requested dataset. | (IT-2) | Active | Not Under Development |
| VERIFY-12677 | IUVP | IUVP Test Information | LD-IUVP-IT-BR026 | Test Result Names (IT-28) of 'CO2 BAG 1', 'CO2 BAG 2', 'CO2 BAG 3', and 'CO2 BAG 4' are not allowed. | Test Result Names (IT-28) of 'CO2 BAG 1', 'CO2 BAG 2', 'CO2 BAG 3', and 'CO2 BAG 4' are not allowed. | (IT-28) | Active | Not Under Development |
| VERIFY-16813 | IUVP | IUVP Test Information | LD-IUVP-IT-BR027 | If Model Year (IV-8) of the test vehicle is greater than '2014' and the category of the Test Procedure (IT-14) is 'FTP' (Test Procedure equal to '2', '11', '21', '25', '31', '35', '41', '45', '51', '52', '80', or '81'), 'US06' (Test Procedure equal to '16', '90', or '96'), 'SC03' (Test Procedure equal to '95'), 'HWY' (Test Procedure equal to '3'), or 'CD' (Test Procedure equal to '81', '83', '84', '85', or '86'), then Test Result/Emission Names (IT-28) of 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), 'DT-EER' (Drive Trace Energy Economy Rating) are required; otherwise, they are optional. | If Model Year (IV-8) of the test vehicle is greater than '2014' and the category of the Test Procedure (IT-14) is 'FTP' (Test Procedure equal to '2', '11', '21', '25', '31', '35', '41', '45', '51', '52', '80', or '81'), 'US06' (Test Procedure equal to '16', '90', or '96'), 'SC03' (Test Procedure equal to '95'), 'HWY' (Test Procedure equal to '3'), or 'CD' (Test Procedure equal to '81', '83', '84', '85', or '86'), then Test Result/Emission Names (IT-28) of 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), 'DT-EER' (Drive Trace Energy Economy Rating) are required; otherwise, they are optional. | (IT-28) | Active | Not Under Development |
| VERIFY-16815 | IUVP | IUVP Test Information | LD-IUVP-IT-BR028 | If Test Result/Emission Name (IT-28) equals 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), or 'DT-EER' (Drive Trace Energy Economy Rating), then Weighted Result (IT-29) must be greater than or equal to -99.99 and less than or equal to 99.99; otherwise, Weighted Result (IT-29) must be greater than or equal to 0. | If Test Result/Emission Name (IT-28) equals 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), or 'DT-EER' (Drive Trace Energy Economy Rating), then Weighted Result (IT-29) must be greater than or equal to -99.99 and less than or equal to 99.99; otherwise, Weighted Result (IT-29) must be greater than or equal to 0. | (IT-29) | Active | Not Under Development |
| VERIFY-16862 | IUVP | IUVP Test Information | LD-IUVP-IT-BR029 | If Test Result/Emission Name (IT-28) equals 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), or 'DT-EER' (Drive Trace Energy Economy Rating), then Test Result Unit (IT-30) must equal 'N/A' (not applicable); otherwise, Test Result Unit (IT-30) must not equal 'N/A' (not applicable). | If Test Result/Emission Name (IT-28) equals 'DT-IWRR' (Drive Trace Inertia Work Ratio Rating), 'DT-ASCR' (Drive Trace Absolute Speed Change Rating), or 'DT-EER' (Drive Trace Energy Economy Rating), then Test Result Unit (IT-30) must equal 'N/A' (not applicable); otherwise, Test Result Unit (IT-30) must not equal 'N/A' (not applicable). | (IT-30) | Active | Not Under Development |
| VERIFY-4851 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR001a | If Process Code (IV-1) is equal to 'R' (Report) or 'C' (Correction) or 'D' (Delete), then an active record must exist in the system with the same Manufacturer Code (IV-2), VIN (IV-3), Emission Program (IV-4) and Mileage Category (IV-20). | If Process Code (IV-1) is equal to 'R' (Report) or 'C' (Correction) or 'D' (Delete), then an active record must exist in the system with the same Manufacturer Code (IV-2), VIN (IV-3), Emission Program (IV-4) and Mileage Category (IV-20). | (IV-2) (IV-3) (IV-4) (IV-20) | Active | Not Under Development |
| VERIFY-4642 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR001b | If Process Code (IV-1) is equal to 'R' (Report) or 'C' (Correction) or 'D' (Delete), then an active record must exist in the system with the same Manufacturer Code (IV-2), VIN (IV-3), Emission Program (IV-4) and Mileage Category (IV-20). | If Process Code (IV-1) is equal to 'R' (Report) or 'C' (Correction) or 'D' (Delete), then an active record must exist in the system with the same Manufacturer Code (IV-2), VIN (IV-3), Emission Program (IV-4) and Mileage Category (IV-20). | (IV-2) (IV-3) (IV-4) (IV-20) | Active | Not Under Development |
| VERIFY-4933 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR002 | If Process Code (IV-1) is equal to 'N' (New), then an active record must not exist in the system with the same Manufacturer Code (IV-2), VIN (IV-3), Emission Program (IV-4) and Mileage Category (IV-20). | If Process Code (IV-1) is equal to 'N' (New), then an active record must not exist in the system with the same Manufacturer Code (IV-2), VIN (IV-3), Emission Program (IV-4) and Mileage Category (IV-20). | (IV-2) (IV-3) (IV-4) (IV-20) | Active | Not Under Development |
| VERIFY-4918 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR003a | Manufacturer Code (IV-2) must exist in the system. | Manufacturer Code (IV-2) must exist in the system. | (IV-2) | Active | Not Under Development |
| VERIFY-4859 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR003b | Manufacturer Code (IV-2) must exist in the system. | Manufacturer Code (IV-2) must exist in the system. | (IV-2) | Active | Not Under Development |
| VERIFY-4905 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR004 | Test Group (IV-6) must exist in the system as a certified test group. | Test Group (IV-6) must exist in the system as a certified test group. | (IV-6) | Active | Not Under Development |
| VERIFY-4865 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR005 | If the Model Year (IV-8) is equal to 2010 or later, then Evaporative/Refueling Family (IV-7) must exist in the system. | If the Model Year (IV-8) is equal to 2010 or later, then Evaporative/Refueling Family (IV-7) must exist in the system. | (IV-7) | Active | Not Under Development |
| VERIFY-4600 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR006 | If the Emission Program (IV-4) is equal to 'R1' (EPA In-Use Surveillance Testing (EPA only)), 'R2' (EPA In-Use Confirmatory Testing (EPA only)), 'C1' (California In-Use Confirmatory Testing Phase 1), or 'C2' (California In-Use Confirmatory Testing Phase 2), then the Manufacturer Code (IV-2) of the Submission Author Details must be 'EPA' or 'ARB' or 'LOD'. | If the Emission Program (IV-4) is equal to 'R1' (EPA In-Use Surveillance Testing (EPA only)), 'R2' (EPA In-Use Confirmatory Testing (EPA only)), 'C1' (California In-Use Confirmatory Testing Phase 1), or 'C2' (California In-Use Confirmatory Testing Phase 2), then the Manufacturer Code (IV-2) of the Submission Author Details must be 'EPA' or 'ARB' or 'LOD'. | (IV-2) | Active | Not Under Development |
| VERIFY-4632 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR007 | The Model Year (IV-8) must match the embedded model year in the Test Group (IV-6). | The Model Year (IV-8) must match the embedded model year in the Test Group (IV-6). | (IV-6) (IV-8) | Active | Not Under Development |
| VERIFY-4576 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR008 | The Model Year (IV-8) must match the embedded model year in the Evaporative/Refueling Family (IV-7). | The Model Year (IV-8) must match the embedded model year in the Evaporative/Refueling Family (IV-7). | (IV-7) (IV-8) | Active | Not Under Development |
| VERIFY-4843 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR009 | The Manufacturer Code (IV-2) must match the manufacturer code embedded in the Test Group (IV-6). | The Manufacturer Code (IV-2) must match the manufacturer code embedded in the Test Group (IV-6). | (IV-6) (IV-2) | Active | Not Under Development |
| VERIFY-4838 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR010 | The Manufacturer Code (IV-2) must match the manufacturer code embedded in the Evaporative/Refueling Family (IV-7). | The Manufacturer Code (IV-2) must match the manufacturer code embedded in the Evaporative/Refueling Family (IV-7). | (IV-7) (IV-2) | Active | Not Under Development |
| VERIFY-4685 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR011 | Manufacturer Division Code (IV-10) must exist in the system. | Manufacturer Division Code (IV-10) must exist in the system. | (IV-10) | Active | Not Under Development |
| VERIFY-4749 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR012 | If the Model Year (IV-8) is equal to 2010 or later, then Carline Code (IV-11) must exist in the system. | If the Model Year (IV-8) is equal to 2010 or later, then Carline Code (IV-11) must exist in the system. | (IV-11) | Active | Not Under Development |
| VERIFY-4795 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR013a | If Transmission Type (IV-23) is equal to 'OT' (Other), then Transmission Type if Other (IV-24) is required; otherwise, it is not allowed. | If Transmission Type (IV-23) is equal to 'OT' (Other), then Transmission Type if Other (IV-24) is required; otherwise, it is not allowed. | (IV-24) | Active | Not Under Development |
| VERIFY-4677 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR013b | If Transmission Type (IV-23) is equal to 'OT' (Other), then Transmission Type if Other (IV-24) is required; otherwise, it is not allowed. | If Transmission Type (IV-23) is equal to 'OT' (Other), then Transmission Type if Other (IV-24) is required; otherwise, it is not allowed. | (IV-24) | Active | Not Under Development |
| VERIFY-4847 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR014 | If Transmission Type (IV-23) is equal to 'M' (Manual), then Transmission Lockup (IV-25) must equal 'N' (No). | If Transmission Type (IV-23) is equal to 'M' (Manual), then Transmission Lockup (IV-25) must equal 'N' (No). | (IV-25) | Active | Not Under Development |
| VERIFY-4629 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR015 | If Creeper Gear (IV-26) is equal to 'Y' (Yes), then Transmission Type (IV-23) must equal 'M' (Manual). | If Creeper Gear (IV-26) is equal to 'Y' (Yes), then Transmission Type (IV-23) must equal 'M' (Manual). | (IV-23) | Active | Not Under Development |
| VERIFY-4812 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR016 | If Transmission Type (IV-23) is equal to 'CVT' (Continuously Variable), then Number of Transmission Gears (IV-27) must equal '1'. | If Transmission Type (IV-23) is equal to 'CVT' (Continuously Variable), then Number of Transmission Gears (IV-27) must equal '1'. | (IV-27) | Active | Not Under Development |
| VERIFY-4598 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR017 | The Date of Inspection (IV-32) must not be greater than the submission date. | The Date of Inspection (IV-32) must not be greater than the submission date. | (IV-32) | Active | Not Under Development |
| VERIFY-4858 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR018 | If Commanded MIL Status (IV-35) is equal to 'Y' (MIL Commanded On), then Active Trouble Code Status (IV-36) must equal 'Y' (Active Trouble Codes Present). | If Commanded MIL Status (IV-35) is equal to 'Y' (MIL Commanded On), then Active Trouble Code Status (IV-36) must equal 'Y' (Active Trouble Codes Present). | (IV-36) | Active | Not Under Development |
| VERIFY-4848 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR019a | If Active Trouble Code Status (IV-36) is 'Y' (Active Trouble Codes Present), then at least one Active Trouble Code (IV-37) is required. | If Active Trouble Code Status (IV-36) is 'Y' (Active Trouble Codes Present), then at least one Active Trouble Code (IV-37) is required. | (IV-37) | Active | Not Under Development |
| VERIFY-4747 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR019b | If Active Trouble Code Status (IV-36) is 'Y' (Active Trouble Codes Present), then at least one Active Trouble Code (IV-37) is required. | If Active Trouble Code Status (IV-36) is 'Y' (Active Trouble Codes Present), then at least one Active Trouble Code (IV-37) is required. | (IV-37) | Active | Not Under Development |
| VERIFY-4666 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR020a | If Readiness Status Complete (IV-38) is equal to 'N' (Not All Readiness Monitors Are Complete), then at least one Incomplete Readiness Status (IV-39) is required. | If Readiness Status Complete (IV-38) is equal to 'N' (Not All Readiness Monitors Are Complete), then at least one Incomplete Readiness Status (IV-39) is required. | (IV-39) | Active | Not Under Development |
| VERIFY-4900 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR020b | If Readiness Status Complete (IV-38) is equal to 'N' (Not All Readiness Monitors Are Complete), then at least one Incomplete Readiness Status (IV-39) is required. | If Readiness Status Complete (IV-38) is equal to 'N' (Not All Readiness Monitors Are Complete), then at least one Incomplete Readiness Status (IV-39) is required. | (IV-39) | Active | Not Under Development |
| VERIFY-4593 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR021 | If Incomplete Readiness Status (IV-39) is equal to 'OT' (Other), then Vehicle Comments (IV-42) is required. | If Incomplete Readiness Status (IV-39) is equal to 'OT' (Other), then Vehicle Comments (IV-42) is required. | (IV-42) | Active | Not Under Development |
| VERIFY-4693 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR022 | If Vehicle Rejection Code (IV-40) is not '0' (Vehicle Was Not Rejected), then Vehicle Rejection Comments (IV-41) is required. | If Vehicle Rejection Code (IV-40) is not '0' (Vehicle Was Not Rejected), then Vehicle Rejection Comments (IV-41) is required. | (IV-41) | Active | Not Under Development |
| VERIFY-4808 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR023 | If Process Code (IV-1) is equal to 'D' (Delete), then Deletion Reason (IV-45) is required. | If Process Code (IV-1) is equal to 'D' (Delete), then Deletion Reason (IV-45) is required. | (IV-45) | Active | Not Under Development |
| VERIFY-4818 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR024a | IUVP Vehicle Information can only be accepted within the allowed time range of submissions for the Model Year (IV-8) and Mileage Category (IV-20). | IUVP Vehicle Information can only be accepted within the allowed time range of submissions for the Model Year (IV-8) and Mileage Category (IV-20). | (IV-20) (IV-8) | Active | Not Under Development |
| VERIFY-4585 | IUVP | IUVP Vehicle Information | LD-IUVP-IV-BR024b | IUVP Vehicle Information can only be accepted within the allowed time range of submissions for the Model Year (IV-8) and Mileage Category (IV-20). | IUVP Vehicle Information can only be accepted within the allowed time range of submissions for the Model Year (IV-8) and Mileage Category (IV-20). | (IV-8) (IV-20) | Active | Not Under Development |
| VERIFY-22736 | Test Information | LD-CTD-TI-BR092 | If Test Fuel Type (TI-9) equals '46' (CARB LEV3 E10 Regular Gasoline), '47' (CARB LEV3 E10 Premium Gasoline), '48' (Tier 3 E10 Regular Gasoline), '49' (Tier 3 E10 Premium Gasoline), '58' (Tier 3 E10 Regular Gasoline [10 RVP-FFV ORVR Only]), or '59' (Tier 3 E10 Premium Gasoline [10 RVP-FFV ORVR Only]), and the Test Procedure (TI-8) equals '23' (FED Fuel 2 Day Evap [Butane]), '27' (CA Fuel 2 Day Evap [Butane Load]), '32' (FED Fuel Running Loss), '34' (FED Fuel 3 Day Evap [Butane Load]), '37' (CA Fuel Running Loss), '38' (CA Fuel 3 Day Evap [Butane Load]), '43' (FED Fuel 2 Day Evap [Heat to Load]), or '47' (CA Fuel 2 Day Evap [Heat to Load]), then a Test Result/Emission Name (TI-19) equal to 'HC-TOTAL-EQUIV' (Total Hydrocarbon Equivalent - Evap Only) must be included. | If Test Fuel Type (TI-9) equals '46' (CARB LEV3 E10 Regular Gasoline), '47' (CARB LEV3 E10 Premium Gasoline), '48' (Tier 3 E10 Regular Gasoline), '49' (Tier 3 E10 Premium Gasoline), '58' (Tier 3 E10 Regular Gasoline [10 RVP-FFV ORVR Only]), or '59' (Tier 3 E10 Premium Gasoline [10 RVP-FFV ORVR Only]), and the Test Procedure (TI-8) equals '23' (FED Fuel 2 Day Evap [Butane]), '27' (CA Fuel 2 Day Evap [Butane Load]), '32' (FED Fuel Running Loss), '34' (FED Fuel 3 Day Evap [Butane Load]), '37' (CA Fuel Running Loss), '38' (CA Fuel 3 Day Evap [Butane Load]), '43' (FED Fuel 2 Day Evap [Heat to Load]), or '47' (CA Fuel 2 Day Evap [Heat to Load]), then a Test Result/Emission Name (TI-19) equal to 'HC-TOTAL-EQUIV' (Total Hydrocarbon Equivalent - Evap Only) must be included. | (TI-19) | Not in the System | Under Development (To Be Added) | |
| File Type | application/vnd.openxmlformats-officedocument.spreadsheetml.sheet |
| File Modified | 0000-00-00 |
| File Created | 0000-00-00 |