Download:
pdf |
pdfOMB No. 3117‐0016/USITC No. 17‐1‐3773; Expiration Date: 6/30/2020
(No response is required if currently valid OMB control number is not displayed)
U.S. PRODUCERS’ QUESTIONNAIRE
SILICON METAL FROM AUSTRALIA, BRAZIL, KAZAKHSTAN, AND NORWAY
This questionnaire must be received by the Commission by November 20, 2017
See last page for filing instructions.
The information called for in this questionnaire is for use by the United States International Trade Commission in
connection with its countervailing duty and antidumping investigations concerning silicon metal from Australia, Brazil,
Kazakhstan, and Norway (Inv. Nos. 701‐TA‐567‐569 and 731‐TA‐1343‐1345 (Final)). The information requested in the
questionnaire is requested under the authority of the Tariff Act of 1930, title VII. This report is mandatory and failure to
reply as directed can result in a subpoena or other order to compel the submission of records or information in your
firm’s possession (19 U.S.C. § 1333(a)).
Name of firm
Address
City
State
Zip Code
Website
Has your firm produced silicon metal (as defined on next page) at any time since January 1, 2014?
NO
(Sign the certification below and promptly return only this page of the questionnaire to the Commission)
YES
(Complete all parts of the questionnaire, and return the entire questionnaire to the Commission)
Return questionnaire via the U.S. International Trade Commission Drop Box by clicking on the
following link: https://dropbox.usitc.gov/oinv/. (PIN: ABKN)
CERTIFICATION
I certify that the information herein supplied in response to this questionnaire is complete and correct to the best of my
knowledge and belief and understand that the information submitted is subject to audit and verification by the Commission. By
means of this certification I also grant consent for the Commission, and its employees and contract personnel, to use the
information provided in this questionnaire and throughout this proceeding in any other import‐injury proceedings conducted by
the Commission on the same or similar merchandise.
I, the undersigned, acknowledge that information submitted in response to this request for information and throughout this
proceeding or other proceedings may be disclosed to and used: (i) by the Commission, its employees and Offices, and contract
personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits,
reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C.
Appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. I understand that all
contract personnel will sign appropriate nondisclosure agreements
Name of Authorized Official Title of Authorized Official
Date
Phone:
Signature
Fax:
Email address
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 2
PART I.‐‐GENERAL INFORMATION
Background.‐‐This proceeding was instituted in response to a petition filed on March 8, 2017, by Globe
Specialty Metals, Inc., Beverly, Ohio. Countervailing and antidumping duties may be assessed on the
subject imports as a result of these proceedings if the Commission makes an affirmative determination
of injury, threat, or material retardation, and if the U.S. Department of Commerce (“Commerce”) makes
an affirmative determination of subsidization and/or dumping. Questionnaires and other information
pertinent to this proceeding are available at
https://www.usitc.gov/investigations/title_7/2017/silicon_metal_australia_brazil_kazakhstan_and/final.
htm.
Silicon metal covered by these investigations is all forms and sizes of silicon metal, including silicon
metal powder. Silicon metal contains at least 85.00 percent but less than 99.99 percent silicon, and less
than 4.00 percent iron, by actual weight. Semiconductor grade silicon (merchandise containing at least
99.99 percent silicon by actual weight and classifiable under HTSUS subheading 2804.61.0000) is
excluded from the scope of these investigations.
Silicon metal is currently imported under statistical reporting numbers 2804.69.1000 and 2804.69.5000
of the Harmonized Tariff Schedule of the United States (HTSUS). The HTSUS provisions are for
convenience and customs purposes; the written description of the scope is dispositive.
Reporting of information.‐‐If information is not readily available from your records, provide carefully
prepared estimates. If your firm is completing more than one questionnaire (i.e., a producer, importer,
and/or purchaser questionnaire), you need not respond to duplicated questions.
Confidentiality.‐‐The commercial and financial data furnished in response to this questionnaire that
reveal the individual operations of your firm will be treated as confidential by the Commission to the
extent that such data are not otherwise available to the public and will not be disclosed except as may
be required by law (see 19 U.S.C. § 1677f). Such confidential information will not be published in a
manner that will reveal the individual operations of your firm; however, general characterizations of
numerical business proprietary information (such as discussion of trends) will be treated as confidential
business information only at the request of the submitter for good cause shown.
Verification.‐‐The information submitted in this questionnaire is subject to audit and verification by the
Commission. To facilitate possible verification of data, please keep all files, worksheets, and supporting
documents used in the preparation of the questionnaire response. Please also retain a copy of the final
document that you submit.
Release of information.‐‐The information provided by your firm in response to this questionnaire, as
well as any other business proprietary information submitted by your firm to the Commission in
connection with this proceeding, may become subject to, and released under, the administrative
protective order provisions of the Tariff Act of 1930 (19 U.S.C. § 1677f) and section 207.7 of the
Commission’s Rules of Practice and Procedure (19 CFR § 207.7). This means that certain lawyers and
other authorized individuals may temporarily be given access to the information for use in connection
with this proceeding or other import‐injury proceedings conducted by the Commission on the same or
similar merchandise; those individuals would be subject to severe penalties if the information were
divulged to unauthorized individuals.
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
I‐1a.
Page 3
OMB statistics.‐‐Please report below the actual number of hours required and the cost to your
firm of completing this questionnaire.
Hours
Dollars
The questions in this questionnaire have been reviewed with market participants to ensure that
issues of concern are adequately addressed and that data requests are sufficient, meaningful,
and as limited as possible. Public reporting burden for this questionnaire is estimated to average
50 hours per response, including the time for reviewing instructions, gathering data, and
completing and reviewing the questionnaire.
We welcome comments regarding the accuracy of this burden estimate, suggestions for
reducing the burden, and any suggestions for improving this questionnaire. Please attach such
comments to your response or send to the Office of Investigations, USITC, 500 E St. SW,
Washington, DC 20436.
I‐1b. TAA information release.‐‐In the event that the U.S. International Trade Commission (USITC)
makes an affirmative final determination in this proceeding, do you consent to the USITC's
release of your contact information (company name, address, contact person, telephone
number, email address) appearing on the front page of this questionnaire to the Departments of
Commerce, Labor, and Agriculture, as applicable, so that your firm and its workers can be made
eligible for benefits under the Trade Adjustment Assistance program?
Yes
No
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
I‐2.
Page 4
Establishments covered.‐‐Provide the city, state, zip code, and brief description of each
establishment covered by this questionnaire. If your firm is publicly traded, please specify the
stock exchange and trading symbol in the footnote to the table. Firms operating more than one
establishment should combine the data for all establishments into a single report.
“Establishment” – Each facility of a firm involved in the production of silicon metal, including
auxiliary facilities operated in conjunction with (whether or not physically separate from) such
facilities.
Establishments
City, State
Zip (5 digit)
Description
covered1
1
I‐3.
1
2
3
4
5
6
Additional discussion on establishments consolidated in this questionnaire: .
Petition support.‐‐Does your firm support or oppose the petition?
Country
Support
Oppose
Take no position
Australia AD
Australia CVD
Brazil AD
Brazil CVD
Kazakhstan CVD
Norway AD
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
I‐4.
I‐5.
Ownership.‐‐Is your firm owned, in whole or in part, by any other firm?
No
Yes‐‐List the following information.
Firm name
Address
Extent of
ownership
(percent)
Related importers/exporters.‐‐Does your firm have any related firms, either domestic or
foreign, that are engaged in importing silicon metal from Australia, Brazil, Kazakhstan, and
Norway into the United States or that are engaged in exporting silicon metal from Australia,
Brazil, Kazakhstan, and Norway to the United States?
No
Yes‐‐List the following information.
Page 5
Firm name
Country
Affiliation
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
I‐6.
Page 6
Related producers.‐‐Does your firm have any related firms, either domestic or foreign, that are
engaged in the production of silicon metal?
No
Yes‐‐List the following information.
Firm name
Country
Affiliation
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 7
PART II.‐‐TRADE AND RELATED INFORMATION
Further information on this part of the questionnaire can be obtained from Lawrence Jones (202‐205‐
3358, [email protected]). Supply all data requested on a calendar‐year basis.
II‐1. Contact information.‐‐Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in part II.
Name
Title
Email
Telephone
Fax
II‐2. Changes in operations.‐‐Please indicate whether your firm has experienced any of the following
changes in relation to the production of silicon metal since January 1, 2014.
(check as many as appropriate)
(If checked, please describe; leave blank if not applicable)
plant openings
plant closings
relocations
expansions
acquisitions
consolidations
prolonged shutdowns or
production curtailments
revised labor agreements
other (e.g., technology)
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 8
II‐3a. Production using same machinery.‐‐Please report your firm’s production of products made on
the same equipment and machinery used to produce silicon metal, and the combined
production capacity on this shared equipment and machinery in the periods indicated.
“Overall production capacity” or “capacity” – The level of production that your
establishment(s) could reasonably have expected to attain during the specified periods. Assume
normal operating conditions (i.e., using equipment and machinery in place and ready to
operate; normal operating levels (hours per week/weeks per year) and time for downtime,
maintenance, repair, and cleanup).
“Production” – All production in your U.S. establishment(s), including production consumed
internally within your firm and production for another firm under a toll agreement.
Quantity (in short tons)
Calendar years
Item
2014
Overall production capacity
2015
January‐September
2016
2016
2017
0
0
0
0
0
Weight of other elements
Silicon metal on a total
weight basis
0
0
0
0
0
Out‐of‐scope products:
Semiconductor grade
silicon metal
Ferrosilicon
0
0
0
0
0
Production of:
Silicon metal on contained
silicon basis1
All other products
2
Total production using
same equipment
1
2
Data entered for production of silicon metal will populate here once reported in question II‐7.
Please identify these products: .
II‐3b. Operating parameters.‐‐The production capacity reported in II‐3a is based on operating hours
per week, weeks per year.
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
II‐3c.
Page 9
Capacity calculation.‐‐Please describe the methodology used to calculate overall production
capacity reported in II‐3a, and explain any changes in reported capacity.
II‐3d. Production constraints.‐‐Please describe the constraint(s) that set the limit(s) on your firm’s
production capacity.
II‐3e. Product shifting.‐‐
(i)
Is your firm able to switch production (capacity) between silicon metal and other products
using the same equipment and/or labor?
No
Yes‐‐ (i.e., have produced other products or are able to produce other
products). Please identify other actual or potential products:
.
(ii)
Please describe the factors that affect your firm’s ability to shift production capacity
between products (e.g., time, cost, relative price change, etc.), and the degree to which
these factors enhance or constrain such shifts.
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
II‐3f.
Page 10
Details of product shifting.—Did your firm at any time since January 1, 2014 switch productiion on
the same furnaces from silicon metal production to ferrosilicon production, or the reverse?
No
Yes‐‐ then for each instance of a shift please answer the following questions: (1)
identify the specific month and year when the capacity was shifted
("period"); (2) identify whether the shift was from silicon metal to
ferrosilicon or from ferrosilicon to silicon metal ("direction"), (3) identify
the capacity of the furnaces shifted ("capacity"); (4) identify how many
days it took to make the transition ("days"); (5) identify the cost of the shift
in U.S. dollars ("cost"), and (6) provide a detailed explanation of the reason
or purpose of the capacity shift ("reason").
Item
First (1) shift
Second (2) shift
Period
Direction
Capacity
Days
Costs
Reason
Item
Third (3) shift
Fourth (4) shift
Period
Direction
Capacity
Days
Costs
Reason
Item
Fifth (5) shift
Sixth (6) shift
Period
Direction
Capacity
Days
Costs
Reason
Additional shifts
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 11
II‐3g. Business plans.‐‐Please provide copies of any business plans for 2014 through 2016 and
forward‐looking business plans for 2017 and beyond that relate to the production or sale of
silicon metal.
II‐4. Tolling.‐‐Since January 1, 2014, has your firm been involved in a toll agreement regarding the
production of silicon metal?
“Toll agreement” – Agreement between two firms whereby the first firm furnishes the raw
materials and the second firm uses the raw materials to produce a product that it then returns
to the first firm with a charge for processing costs, overhead, etc.
II‐5.
No
Yes
If yes‐‐Please describe the toll arrangement(s) and name the firm(s)
involved.
Foreign trade zones.‐‐
(a)
Firm's FTZ operations.‐‐Does your firm produce silicon metal in and/or admit silicon
metal into a foreign trade zone (FTZ)?
“Foreign trade zone” is a designated location in the United States where firms utilize
special procedures that allow delayed or reduced customs duty payments on foreign
merchandise. A foreign trade zone must be designed as such pursuant to the rules and
procedures set forth in the Foreign‐Trade Zones Act.
No
Yes
If yes‐‐ Describe the nature of your firms operations in FTZs and identify
the specific FTZ site(s).
(b)
Other firms' FTZ operations.‐‐To your knowledge, do any firms in the United States
import silicon metal into a foreign trade zone (FTZ) for use in distribution of silicon
metal and/or the production of downstream articles?
No
Yes
If yes‐‐Identify the firms and the FTZs.
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
II‐6.
Page 12
Importer.‐‐Since January 1, 2014, has your firm, or any firm related to you, imported silicon
metal?
“Importer” – The person or firm primarily liable for the payment of any duties on the
merchandise, or an authorized agent acting on his behalf. The importer may be the consignee,
or the importer of record.
II‐7.
No
Yes
If yes‐‐ COMPLETE AND RETURN A U.S. IMPORTERS’ QUESTIONNAIRE
Production, shipment, and inventory data.‐‐Report your firm’s production capacity, production,
shipments, and inventories related to the production of silicon metal in its U.S. establishment(s)
during the specified periods.
“Average production capacity” or “capacity” – The level of production that your
establishment(s) could reasonably have expected to attain during the specified periods. Assume
normal operating conditions (i.e., using equipment and machinery in place and ready to
operate; normal operating levels (hours per week/weeks per year) and time for downtime,
maintenance, repair, and cleanup; and a typical or representative product mix).
“Production” – All production in your U.S. establishment(s), including production consumed
internally within your firm and production for another firm under a toll agreement.
“Commercial U.S. shipments” – Shipments made within the United States as a result of an arm’s
length commercial transaction in the ordinary course of business. Report net values (i.e., gross
sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned
goods) in U.S. dollars, f.o.b. your point of shipment.
“Internal consumption” – Product consumed internally by your firm. Such transactions are
valued at fair market value.
“Transfers to related firms” – Shipments made to related domestic firms. Such transactions are
valued at fair market value.
“Related firm” – A firm that your firm solely or jointly owns, manages, or otherwise controls.
“Export shipments” – Shipments to destinations outside the United States, including shipments
to related firms.
“Inventories” – Finished goods inventory, not raw materials or work‐in‐progress.
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records used in
the preparation of the trade data, as Commission staff may contact your firm regarding questions on the
trade data. The Commission may also request that your company submit copies of the supporting
documents/records (such as production and sales schedules, inventory records, etc.) used to compile
these data.
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
II‐7.
Page 13
Production, shipment, and inventory data.‐‐Continued
Quantity (in short tons contained silicon) and value (in $1,000)
Calendar years
Item
2014
2015
January‐September
2016
1
Average production capacity (quantity) (A)
2016
Beginning‐of‐period inventories (quantity)
(B)
Production (quantity) (C)
U.S. shipments:
Commercial shipments:
Quantity (D)
Value (E)
Internal consumption:2
Quantity (F)
2
Value (G)
2017
2
Transfers to related firms:
Quantity (H)
2
Value (I)
3
Export shipments:
Quantity (J)
Value (K)
End‐of‐period inventories (quantity) (L)
1
The production capacity reported is based on operating
hours per week,
weeks per year. Please describe the
methodology used to calculate production capacity, and explain any changes in reported capacity .
2
Internal consumption and transfers to related firms must be valued at fair market value. In the event that your firm
uses a different basis for valuing these transactions, please specify that basis (e.g., cost, cost plus, etc.) and provide value
data using that basis for each of the periods noted above: .
3
Identify your firm’s principal export markets: .
RECONCILIATION OF SHIPMENTS, PRODUCTION, AND INVENTORY.‐‐Generally, the data reported for the end‐of‐
period inventories (i.e., line L) should be equal to the beginning‐of‐period inventories (i.e., line B), plus
production (i.e., line C), less total shipments (i.e., lines D, F, H, and J). Please ensure that any differences are not
due to data entry errors in completing this form, but rather reflect your firm’s actual records; and, also provide
explanations for any differences (e.g., theft, loss, damage, record systems issues, etc.) if they exist.
Calendar years
Reconciliation
B + C – D – F – H – J – L = should equal
zero ("0") or provide an explanation.1
1
2014
2015
0
January‐September
2016
0
2016
0
2017
0
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are nonetheless accurate: .
0
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
II‐8.
Page 14
Channels of distribution.‐‐Report your firm’s U.S. shipments (i.e., inclusive of commercial U.S.
shipments, internal consumption, and transfers to related firms) by channel of distribution.
Quantity (in short tons contained silicon) and value (in $1,000)
Calendar years
Item
2014
Channels of distribution:
U.S. shipments:
To distributors
Quantity (M)
Value (N)
To polysilicon and chemical
producers
Quantity (O)
Value (P)
To primary aluminum producers
Quantity (Q)
Value (R)
To secondary aluminum
producers
Quantity (S)
Value (T)
2015
January‐September
2016
2016
2017
1
To all other end users
Quantity (U)
Value (V)
1
Identify other end users: .
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities and values reported for channels of
distribution (i.e., lines M, O, Q, S, and U for quantity and N, P, R, T, V for value) in each time period equal
the quantities and values reported for commercial U.S. shipments (i.e., lines D, F, and H for quantity and
E, G, and I for value) in each time period. If the calculated fields below return values other than zero (i.e.,
“0”), the data reported must be revised prior to submission to the Commission.
Calendar years
Reconciliation
2014
2015
January‐September
2016
2016
2017
Quantity: M + O + Q + S + U – D – F ‐
H = zero ("0"), if not revise.
0
0
0
0
0
Value: N + P + R + T + V – E – G – I =
zero ("0"), if not revise.
0
0
0
0
0
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
II‐9.
Page 15
U.S. shipments by product type.‐‐Report your firm’s U.S. shipments (i.e., inclusive of
commercial U.S. shipments, internal consumption, and transfers tor related firms) by product
type during the specified periods.
Low boron content silicon metal.‐‐Silicon metal with a boron content of 0.002 percent
(equal to 20 parts per million (“ppm”)) or less.
High purity grade silicon metal.‐‐Silicon metal with a silicon (Si) content greater than or
equal to 99.1, iron (Fe) content less than or equal to 0.30, aluminum (Al) content less
than or equal to 0.30, calcium (Ca) content less than or equal to 0.05, titanium (Ti)
content less than or equal to 0.05, and a carbon (C) content less than or equal to 0.15,
but does not meet the definition of low boron content silicon metal.
Metallurgical grade silicon metal.‐‐Silicon metal that does not meet either the
definition of (a) high purity grade silicon metal (defined above) or (b) low boron content
silicon metal (also defined above).
Quantity (in short tons contained silicon), value (in $1,000)
Calendar years
Item
U.S. shipments.‐‐
Low boron content silicon
metal.‐‐
Quantity (W)
Value (X)
High purity grade silicon
metal (excluding low boron
content silicon metal).‐‐
Quantity (Y)
Value (Z)
Metallurgical grade silicon
metal (excluding low boron
content silicon metal).‐‐
Quantity (AA)
2014
2015
January‐September
2016
2016
2017
Value (AB)
RECONCILIATION OF SHIPMENTS.‐‐Please ensure that the quantities and values reported for shipments
by form (i.e., lines W through AB) in each time period equal the quantities and values reported for U.S.
shipments (i.e., lines D through I) in each time period. If the calculated fields below return values other
than zero (i.e., “0”), the data reported must be revised prior to submission to the Commission.
Calendar years
January‐September
Reconciliation item
2014
2015
2016
2016
2017
Quantity reconcile: W + Y + AA–
D – F ‐ H = zero ("0"), if not
revise.
0
0
0
0
0
Value reconcile: X + Z + AB – E –
G – I = zero ("0"), if not revise.
0
0
0
0
0
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 16
II‐10. Employment data.‐‐Report your firm’s employment‐related data related to the production of
silicon metal and provide an explanation for any trends in these data.
“Production and Related Workers” (PRWs) includes working supervisors and all nonsupervisory
workers (including group leaders and trainees) engaged in fabricating, processing, assembling,
inspecting, receiving, storage, handling, packing, warehousing, shipping, trucking, hauling,
maintenance, repair, janitorial and guard services, product development, auxiliary production
for plant’s own use (e.g., power plant), recordkeeping, and other services closely associated with
the above production operations.
Average number employed annually may be computed by adding the number of employees,
both full time and part time, for the 12 pay periods ending closest to the 15th of the month and
divide that total by 12. For the January to September periods, calculate similarly and divide by 9.
“Hours worked” – includes time paid for sick leave, holidays, and vacation time. Include
overtime hours actually worked; do not convert overtime pay to its equivalent in straight time
hours.
“Wages paid” – Total wages paid before deductions of any kind (e.g., withholding taxes, old‐age
and unemployment insurance, group insurance, union dues, bonds, etc.). Include wages paid
directly by your firm for overtime, holidays, vacations, and sick leave.
Calendar years
Item
2014
2015
January‐September
2016
2016
2017
Average number of PRWs (number)
Hours worked by PRWs (1,000 hours)
Wages paid to PRWs ($1,000)
Explanation of trends:
II‐11. Related firms.‐‐If your firm reported transfers to related firms in question II‐7, please indicate
the nature of the relationship between your firm and the related firms (e.g., joint venture,
wholly owned subsidiary), whether the transfers were priced at market value or by a non‐
market formula, whether your firm retained marketing rights to all transfers, and whether the
related firms also processed inputs from sources other than your firm. Please identify the
related entities by name and location.
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 17
II‐12. Purchases.‐‐Other than direct imports, has your firm otherwise purchased silicon metal since
January 1, 2014?
“Purchase” – A transaction to buy product from a U.S. corporate entity such as another U.S.
producer, a U.S. distributor, or a U.S. firm that has directly imported the product.
“Import” – A transaction to buy from a foreign supplier where your firm is the importer of
record for Customs purposes.
No
Yes‐‐Report such purchases below and explain the reasons for your firms'
purchases:
(Quantity in short tons contained silicon)
Calendar years
Item
2014
Purchases from U.S.
importers1 of silicon metal
from‐‐
Australia
2015
January‐September
2016
2016
2017
Brazil
Kazakhstan
Purchases from domestic
producers3
Purchases from other
sources4
Norway
2
All other sources
1
Please list the name of the importer(s) from which your firm purchased this product. If your firm’s import
suppliers differ by source, please identify the source for each listed supplier: .
2
Identify country (ies): .
3
Please list the name of the producer(s) or U.S. distributor(s) from which your firm purchased this product:
.
4
Please list the name of the firm (s) from which your firm purchased this product: .
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 18
II‐13. Captive production use.‐‐Please report your firm’s internal consumption and/or transfers to
related firms in 2016 by disposition. Identify below the form of the product your firm internally
consumes or transfers to a related firm.
Transfers to related firms
Internal consumption
2016
2016
(short tons
(short tons
contained silicon)
contained silicon)
Products
Sold as silicon metal
1
Unusable/not further processed
2
Processed into other products
Total
N/A
0
0
1
Please describe these products: .
Please identify the top‐5 products silicon metal was processed into by your firm, rank ordered by larger to
smaller quantity: .
2
RECONCILIATION OF INTERNAL CONSUMPTION AND TRANSFERS.—The sum of the data reported above
should be equal to the 2016 data reported for internal consumption and transfers in question II‐7 for
2016. If the calculated fields below return values other than zero (i.e., “0”), the data reported must be
revised prior to submission to the Commission.
Reconciliation
Data in this question minus data in
question II‐7.
Internal consumption
2016
(short tons
contained silicon)
0
Transfers to related firms
2016
(short tons
contained silicon)
0
II‐14. Other explanations.‐‐If your firm would like to further explain a response to a question in Part II
that did not provide a narrative box, please note the question number and the explanation in
the space provided below. Please also use this space to highlight any issues your firm had in
providing the data in this section, including but not limited to technical issues with the MS Word
questionnaire.
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 19
PART III.‐‐FINANCIAL INFORMATION
Address questions on this part of the questionnaire to David Boyland (202‐708‐4725,
[email protected]).
III‐1. Contact information.‐‐Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in part III.
Name
Title
Email
Telephone
Fax
III‐2. Accounting system.‐‐Briefly describe your firm’s financial accounting system.
A.
When does your firm’s fiscal year end (month and day)?
If your firm’s fiscal year changed during the data‐collection period, explain
below:
Note.‐‐Please note that we are requesting that firms report their financial data
on a calendar year basis.
B.1. Describe the lowest level of operations (e.g., plant, division, company‐wide) for
which financial statements are prepared that include silicon metal:
2. Does your firm prepare profit/loss statements for silicon metal:
Yes
No
3. How often did your firm (or parent company) prepare financial statements
(including annual reports, 10Ks)? Please check relevant items below.
Audited, unaudited, annual reports, 10Ks, 10Qs,
Monthly, quarterly, semi‐annually, annually
4. Accounting basis: GAAP, cash, tax, or other comprehensive
basis of accounting (specify)
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records
used in the preparation of the financial data, as Commission staff may contact your firm
regarding questions on the financial data. The Commission may also request that your company
submit copies of the supporting documents/records (financial statements, including internal
profit‐and‐loss statements for the division or product group that includes silicon metal, as well as
specific statements and worksheets) used to compile these data.
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
III‐3.
Page 20
Cost accounting system.‐‐Briefly describe your firm’s cost accounting system (e.g., standard
cost, job order cost, etc.).
III‐4.
Allocation basis.‐‐Briefly describe your firm’s allocation basis, if any, for COGS, SG&A, and
interest expense and other income and expenses.
III‐5.
Product listing.‐‐Please list the products your firm produced in the facilities in which your firm
produced silicon metal, and provide the share of net sales accounted for by these products in
your firm’s most recent fiscal year.
Products
Share of sales
Silicon metal
%
%
%
%
%
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
III‐6.
Page 21
Does your firm purchase inputs (raw materials, labor, energy, or any services) used in the
production of silicon metal from any related suppliers (e.g., inclusive of transactions between
related firms, divisions and/or other components within the same company)?
Yes‐‐Continue to question III‐7.
III‐7.
No‐‐Continue to question III‐9a.
Inputs from related suppliers.‐‐Please identify the inputs used in the production of silicon metal
that your firm purchases from related suppliers and that are reflected in the financial results
reported in question III‐9a (Total market operations on silicon metal). For “Share of total COGS”
please report this information by relevant input for 2016. For “Input valuation” (note 1) please
describe the basis, as recorded in your company’s own accounting system, of the purchase cost
from the related supplier; e.g., the related supplier’s actual cost, cost plus, negotiated transfer
price to approximate fair market value.
Input1
Related supplier
Share of total III‐9a COGS2
1 With respect to inputs purchased from related suppliers, please describe the relevant input valuation in the
firm’s accounting books and records:
2
As applicable, please describe the extent to which the “share of total COGS” of inputs purchased from
related suppliers is different for III‐9c COGS (Open market operations on silicon metal):
III‐8.
Inputs purchased from related suppliers.‐‐Please confirm that the inputs purchased from
related suppliers, as identified in III‐7, were reported in both III‐9a (Total market operations on
silicon metal) and III‐9c (Open market operations on silicon metal) in a manner consistent with
your firm’s accounting books and records.
Yes
No‐‐In the space below, please report the valuation basis of inputs purchased from related
suppliers as reported in III‐9a and III‐9c.
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 22
III‐9a. Total market operations on silicon metal.‐‐Report the revenue and related cost information
requested below on the silicon metal total market operations of your firm’s U.S.
establishment(s).1 Do not report resales of products. Note that internal consumption and
transfers to related firms must be valued at fair market value. Input purchases from related
suppliers should be consistent with and based on information in the firm’s accounting books
and records. Provide data for the requested calendar years, and for the specified interim
periods.
Quantity (in short tons of contained silicon) and value (in $1,000)
Calendar years‐‐
Item
2014
2015
January‐September
2016
2016
2017
2
Net sales quantities:
Commercial sales (“CS”)
Internal consumption (“IC”)
Transfers to related firms (“Transfers”)
0
0
0
0
0
Internal consumption
Transfers to related firms
0
0
0
0
0
Electricity
Direct labor
Other factory costs
Total net sales quantities
Net sales values:2
Commercial sales
Total net sales values
Cost of goods sold (COGS):3
Raw materials
Total COGS
0
0
0
0
0
Gross profit or (loss)
0
0
0
0
0
Selling, general, and administrative (SG&A)
expenses:
Selling expenses
General and administrative expenses
0
0
0
0
0
0
0
0
0
0
All other expense items
All other income items
0
0
0
0
0
Total SG&A expenses
Operating income (loss)
Other expenses and income:
Interest expense
Net income or (loss) before income taxes
Depreciation/amortization included above
1 Include only sales (whether domestic or export) and costs related to your U.S. manufacturing operations.
2
Less discounts, returns, allowances, and prepaid freight. The quantities and values should approximate the corresponding
shipment quantities and values reported in Part II of this questionnaire.
3 COGS (whether for domestic or export sales) should include costs associated with CS, IC, and Transfers. Electricity costs
specific to the manufacture of silicon metal should be reported in the designated line item.
Note ‐‐ The table above contains calculations that will appear when you have entered data in the MS
Word form fields.
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 23
III‐9b. Inputs.‐‐Based on the cost information for your firm’s silicon metal operations as reported in
question III‐9a (Total market operations on silicon metal), report where identified inputs, as
applicable, are classified in question III‐9a COGS (e.g., raw materials, other factory costs), and
their associated cost. Provide data for the requested calendar years, and for the specified
interim periods.
Value (in $1,000)
Calendar years
Item
2014
2015
January‐September
2016
Electrodes (classified in COGS as )
2016
2017
Coal (classified in COGS as )
Natural Gas (classified in COGS as )
Other primary non‐electricity inputs
(identify, , classified in COGS as )
Other primary non‐electricity inputs
(identify, , classified in COGS as )
Other primary non‐electricity inputs
(identify, , classified in COGS as )
Other primary non‐electricity inputs
(identify, , classified in COGS as )
Other primary non‐electricity inputs
(identify, , classified in COGS as )
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 24
III‐9c. Open market operations on silicon metal.‐‐Report the revenue and related cost information
requested below on the silicon metal open market operations of your firm’s U.S.
establishment(s).1 Do not report resales of products. Input purchases from related suppliers
should be consistent with and based on information in the firm’s accounting books and
records. Provide data for the requested calendar years, and for the specified interim periods.
Quantity (in short tons of contained silicon) and value (in $1,000)
Calendar years‐‐
Item
2014
2015
January‐September
2016
2016
2017
Commercial sales quantities
0
0
0
0
0
Commercial sales values
0
0
0
0
0
Electricity
Direct labor
Other factory costs
Total COGS
0
0
0
0
0
Gross profit or (loss)
0
0
0
0
0
Selling, general, and administrative (SG&A)
expenses:
Selling expenses
General and administrative expenses
0
0
0
0
0
0
0
0
0
0
3
Cost of goods sold (COGS):
Raw materials
Total SG&A expenses
Operating income (loss)
Other expenses and income:
Interest expense
All other expense items
All other income items
0
0
0
0
0
Net income or (loss) before income taxes
Depreciation/amortization included above
1 Include only sales (whether domestic or export) and costs related to your U.S. manufacturing operations.
2
Less discounts, returns, allowances, and prepaid freight. The quantities and values should approximate the corresponding
shipment quantities and values reported in Part II of this questionnaire.
3 COGS (whether for domestic or export sales) should include costs associated with CS, IC, and Transfers. Electricity costs
specific to the manufacture of silicon metal should be reported in the designated line item.
Note ‐‐ The table above contains calculations that will appear when you have entered data in the MS
Word form fields.
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 25
III‐9d. Inputs.‐‐Based on the cost information for your firm’s silicon metal operations as reported in
question III‐9c (Open market operations on silicon metal), report where identified inputs, as
applicable, are classified in question III‐9c COGS (e.g., raw materials, other factory costs), and
their associated cost. Provide data for the requested calendar years, and for the specified
interim periods.
Value (in $1,000)
Calendar years
Item
2014
2015
January‐September
2016
Electrodes (classified in COGS as )
2016
2017
Coal (classified in COGS as )
Natural Gas (classified in COGS as )
Other primary non‐electricity inputs
(identify, , classified in COGS as )
Other primary non‐electricity inputs
(identify, , classified in COGS as )
Other primary non‐electricity inputs
(identify, , classified in COGS as )
Other primary non‐electricity inputs
(identify, , classified in COGS as )
Other primary non‐electricity inputs
(identify, , classified in COGS as )
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 26
III‐9e. Financial data reconciliation.‐‐The calculable line items (i.e., total net sales quantities and
values, total COGS, gross profit or loss, total SG&A, and net income or loss) from question III‐9a
(Total market operations on silicon metal) and III‐9c (Open market operations on silicon metal)
have been calculated from the data submitted in the other line items. Do the calculated fields
return the correct data according to your firm's financial records ignoring non‐material
differences that may arise due to rounding?
Yes No‐‐If the calculated fields do not show the correct data, please double check the
feeder data for data entry errors and revise.
Also, check signs accorded to the post operating income line items; the two
expense line items should report positive numbers (i.e., expenses are
positive and incomes or reversals are negative‐‐instances of the latter
should be rare in those lines) while the income line item also in most
instances should have its value be a positive number (i.e., income is positive,
expenses or reversals are negative).
If after reviewing and potentially revising the feeder data your firm has
provided, the differences between your records and the calculated fields
persist please identify and discuss the differences in the space below.
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 27
III‐10a. Nonrecurring items (charges and gains) included in III‐9a (Total market operations on silicon
metal) financial results.‐‐For each annual and interim period for which financial results are
reported in question III‐9a, please specify all material (significant) nonrecurring items (charges
and gains) in the schedule below, the specific question III‐9a line item where the nonrecurring
items are included, a brief description of the relevant nonrecurring items, and the associated
values (in $1,000), as reflected in question III‐9a; i.e., if an aggregate nonrecurring item has been
allocated to question III‐9a, only the allocated value amount included in question III‐9a should
be reported in the schedule below. Note: The Commission’s objective here is to gather
information only on material (significant) nonrecurring items which impacted the reported
financial results of the subject product in question III‐9a.
Calendar years‐‐
2014
2015
January‐September
2016
2016
2017
Nonrecurring item: In this column please provide a
Nonrecurring item: In these columns please report the amount of the
brief description of each nonrecurring item and indicate relevant nonrecurring item reported in question III‐9a.
the specific line item in table III‐9a where the
nonrecurring item is classified.
Value (in $1,000)
1. , classified as
2. , classified as
3. , classified as
4. , classified as
5. , classified as
6. , classified as
7. , classified as
III‐10b. Nonrecurring items (charges and gains) included in III‐9c (Open market operations on silicon
metal) financial results.—For each annual and interim period for which financial results are
reported in question III‐9c, please specify all material (significant) nonrecurring items (charges
and gains) in the schedule below, the specific question III‐9c line item where the nonrecurring
items are included, a brief description of the relevant nonrecurring items, and the associated
values (in $1,000), as reflected in question III‐9c; i.e., if an aggregate nonrecurring item has been
allocated to question III‐9c, only the allocated value amount included in question III‐9c should
be reported in the schedule below. Note: The Commission’s objective here is to gather
information only on material (significant) nonrecurring items which impacted the reported
financial results of the subject product in question III‐9c.
Calendar years‐‐
2014
2015
January‐September
2016
2016
2017
Nonrecurring item: In this column please provide a
Nonrecurring item: In these columns please report the amount of the
brief description of each nonrecurring item and indicate relevant nonrecurring item reported in question III‐9c.
the specific line item in table III‐9c where the
nonrecurring item is classified.
Value (in $1,000)
1. , classified as
2. , classified as
3. , classified as
4. , classified as
5. , classified as
6. , classified as
7. , classified as
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 28
III‐10c. Classification of identified nonrecurring items (charges and gains) in the accounting books and
records of the company.‐‐If non‐recurring items were reported in questions III‐10a and III‐10b
above, please identify where your company recorded these items in your accounting books and
records in the normal course of business; i.e., just as responses to question III‐10a and III‐10b
identify where these items are reported in questions III‐9a and III‐9c, respectively.
III‐11. Merger or acquisition related to silicon metal operations.‐‐If your company underwent a
merger or acquisition during the period examined, which involved silicon metal operations,
please describe the extent to which U.S. silicon metal operations were affected by the merger or
acquisition, as well as impact (direct or indirect) on silicon metal revenue, COGS, SG&A
expenses, interest expense, other income or expenses, and deprecation. In your response,
please also specify when the merger or acquisition occurred, entities and operations involved,
and objective. As appropriate, please refer to the company’s response to question II‐2 in Part II
of this questionnaire.
III‐12. Asset values.‐‐Report the total assets (i.e., both current and long‐term assets) associated with
the production, warehousing, and sale of silicon metal. If your firm does not maintain some or
all of the specific asset information necessary to calculate total assets for silicon metal in the
normal course of business, please estimate this information based upon a method (such as
production, sales, or costs) that is consistent with relevant cost allocations in questions III‐9a
and/or III‐9c. Provide data for the requested calendar years.
Note: Total assets should reflect net assets after any accumulated depreciation and allowances
deducted. Total assets should be allocated to the subject products if these assets are also
related to other products.
Value (in $1,000)
Calendar years‐‐
Item
1
Total assets (net)
1
2014
2015
2016
Please provide a brief explanation if there were any substantial changes in total asset value during the period; e.g., due to
asset write‐offs, revaluation, and major purchases:
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 29
III‐13. Capital expenditures and research and development expenses.‐‐Report your firm’s capital
expenditures and research and development expenses for silicon metal. Provide data for the
requested calendar years, and for the specified interim periods.
Value (in $1,000)
Calendar years‐‐
Item
2014
2015
January‐September
2016
1
Capital expenditures
2
Research and development expenses
1
2
2016
2017
Please describe the nature, focus, and significance of your firm’s capital expenditures on the subject product.
Please describe the nature, focus, and significance of your firm’s R&D expenses related to subject product.
III‐14. Data consistency and reconciliation.‐‐Please indicate whether your firm’s financial data for
questions III‐9a, III‐9c, III‐12, and III‐13 are based on a calendar year or on your firm’s fiscal year:
Calendar year
Fiscal year Specify fiscal year
Please note the total quantities and values reported in question III‐9a (Total market operations
on silicon metal) should reconcile with the data reported in question II‐7 (including export
shipments) as long as they are reported on the same calendar year basis.
RECONCILIATION OF TRADE VS FINANCIAL DATA.‐‐Please ensure that the quantities and values reported
for total shipments in part II equal the quantities and values reported total net sales in part III of this
questionnaire in each time period unless the financial data from part III are reported on a fiscal year
basis, in which case only the interim periods must reconcile. If the calculated fields below return values
other than zero (i.e., “0”) and both are being reported on a calendar basis, please explain the discrepancy
below.
Full year data
Reconciliation
2014
Quantity: Trade data from part II
less financial data from part III, = zero
("0") except as noted above.
2015
2016
2017
0
0
Value: Trade data from part II less
financial data from part III, = zero
("0") except as noted above.
0
0
0
Do these data in question III‐9a reconcile with data in question II‐7?
0
0
No
If no, please explain.
0
2016
0
Yes
0
January‐September
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 30
III‐15. Effects of imports on investment.‐‐Since January 1, 2014, has your firm experienced any actual
negative effects on its return on investment or the scale of capital investments as a result of
imports of silicon metal from Australia, Brazil, Kazakhstan, and Norway?
No
Yes‐‐My firm has experienced actual negative effects as follows:
(check as many as appropriate)
(please describe)
Cancellation, postponement,
or rejection of expansion
projects
Denial or rejection of
investment proposal
Reduction in the size of
capital investments
Return on specific
investments negatively
impacted
Other
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 31
III‐16. Effects of imports on growth and development.‐‐Since January 1, 2014, has your firm
experienced any actual negative effects on its growth, ability to raise capital, or existing
development and production efforts (including efforts to develop a derivative or more advanced
version of the product) as a result of imports of silicon metal from Australia, Brazil, Kazakhstan,
and Norway?
No
Yes‐‐My firm has experienced actual negative effects as follows:
(check as many as appropriate)
(please describe)
Rejection of bank loans
Lowering of credit rating
Problem related to the issue
of stocks or bonds
Ability to service debt
Other
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 32
III‐17. Anticipated effects of imports.‐‐Does your firm anticipate any negative effects due to imports of
silicon metal from Australia, Brazil, Kazakhstan, and/or Norway?
No
Yes
If yes, my firm anticipates negative effects as follows:
III‐18. Other explanations.‐‐If your firm would like to further explain a response to a question in Part III
that did not provide a narrative box, please note the question number and the explanation in
the space provided below. Please also use this space to highlight any issues your firm had in
providing the data in this section, including but not limited to technical issues with the MS Word
questionnaire.
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 33
PART IV.‐‐PRICING AND MARKET FACTORS
Further information on this part of the questionnaire can be obtained from Jon Ruder (202‐205‐3435,
[email protected]).
IV‐1. Contact information.‐‐Please identify the individual that Commission staff may contact
regarding the confidential information submitted in part IV.
Name
Title
Email
Telephone
Fax
PRICE DATA
IV‐2. This question requests quarterly quantity and value data for your firm’s commercial shipments
to unrelated U.S. customers since January 1, 2014 of the following products produced by your
firm.
Product 1.‐‐ Sold to primary aluminum producers; silicon metal less than 99.99% pure that
contains a minimum of 98.5% silicon, a maximum of 1.00% iron, a maximum of
0.07% calcium, and no restriction of the aluminum content.
Product 2.‐‐ Sold to secondary aluminum producers; silicon metal less than 99.99% pure that
contains a minimum of 97.0% silicon, a maximum of 2.00% iron, a maximum of 0.4%
calcium, and no restriction of the aluminum content.
Product 3.‐‐ Sold to chemical and polysilicon manufacturers; silicon metal less than 99.99% pure
that contains a minimum of 98.0% silicon, a maximum of 1.50% iron, a maximum of
0.2% calcium, and a maximum of 0.4% aluminum.
Please note that values should be f.o.b., U.S. point of shipment and should not include U.S.‐inland
transportation costs. Values should reflect the final net amount paid to your firm (i.e., should be net
of all deductions for discounts or rebates).
During January 2014‐September 2017, did your firm produce and sell to unrelated U.S.
customers any of the above listed products (or any products that were competitive with these
products)?
Yes.—Please complete the following pricing data table as appropriate.
No.—Skip to question IV‐3.
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
IV‐2.
Page 34
Price data.—Report below the quarterly price data1 for pricing products2 produced and sold by
your firm.
Report data in short tons of contained silicon and actual dollars (not 1,000s).
Period of shipment
2014:
January‐March
April‐June
July‐September
October‐December
2015:
January‐March
April‐June
July‐September
October‐December
2016:
January‐March
April‐June
July‐September
October‐December
2017:
January‐March
April‐June
July‐September
(Quantity in short tons of contained silicon, value in dollars)
Product 1
Product 2
Product 3
Quantity
Value
Quantity
Value
Quantity
Value
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods),
f.o.b. your firm’s U.S. point of shipment.
2
Pricing product definitions are provided on the first page of Part IV.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product,
provide a description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Pricing data methodology.‐‐Please describe the method and the kinds of documents/records
that were used to compile your price data.
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records
used in the preparation of the price data, as Commission staff may contact your firm regarding
questions on the price data. The Commission may also request that your company submit copies
of the supporting documents/records (such as sales journal, invoices, etc.) used to compile these
data.
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 35
IV‐3. Price setting. ‐‐
(a) How does your firm determine the prices that it charges for sales of silicon metal (check all that
apply)? If your firm issues price lists, please submit sample pages of a recent list.
Transaction
by
transaction
Set
price
lists
Contracts
Other
If other, describe
(b) Do your firm’s contracts set prices based on a comparison to raw material costs or price
indexes?
IV‐4.
No
Yes
Discount policy.‐‐Please indicate and describe your firm’s discount policies (check all that apply).
Quantity
discounts
If yes, please briefly describe each pricing mechanism,
and the impact such indexation had on prices over the
period of investigation.
Annual
total
volume
discounts
No
discount
policy
Other
Describe
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
IV‐5.
Pricing terms.‐‐
(a)
What are your firm’s typical sales terms for its U.S.‐produced silicon metal?
Net 30
days
Net 60
days
Page 36
(b)
2/10 net
30 days
Other
Other (specify)
On what basis are your firm’s prices of domestic silicon metal usually quoted (check
one)?
Delivered
F.o.b.
IV‐6.
If f.o.b., specify point
Contract versus spot.‐‐Approximately what share of your firm’s sales of its U.S.‐produced silicon
metal in 2016 was on a (1) long‐term contract basis, (2) annual contract basis, (3) short‐term
contract basis, and (4) spot sales basis?
Item
Share of 2016
sales
Long‐term
contracts
(multiple
deliveries for
more than 12
months)
%
Type of sale
Short‐term
Annual
contracts
contracts
(multiple
(multiple
deliveries for
deliveries for 12
less than 12
months)
months)
%
%
Spot sales
(for a single
delivery)
%
Total
(should
sum to
100.0%)
0.0
%
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
IV‐7.
Page 37
Contract provisions.‐‐Please fill out the table regarding your firm’s typical sales contracts for
U.S.‐produced silicon metal (or check “not applicable” if your firm does not sell on a long‐term,
short‐term and/or annual contract basis).
Typical sales contract provisions
Item
Short‐term
contracts
(multiple
deliveries for
less than 12
months)
Average contract duration
No. of
days
Price renegotiation (during contract period)
Fixed quantity and/or price
Meet or release provision
Indexed to raw material costs1
Indexed to published silicon metal prices2
Annual
contracts
(multiple
deliveries
for 12
months)
Long‐term
contracts
(multiple
deliveries for
more than 12
months)
365
Yes
No
Quantity
Price
Both
Yes
No
1
Yes
No
Yes2
No
Not applicable
1
Please describe any indexing mechanisms and relevant raw materials:
2
Please describe any indexing mechanisms and price indices:
IV‐8.
Lead times.‐‐What is your firm’s share of sales from inventory and produced to order and what
is the typical lead time between a customer’s order and the date of delivery for your firm’s sales
of its U.S.‐produced silicon metal?
Share of 2016 Lead time (Average
Source
sales
number of days)
From inventory
%
Produced to order
%
Total (should sum to 100.0%)
0.0 %
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
IV‐9.
Page 38
Shipping information.‐‐
(a)
(b)
(c)
What is the approximate percentage of the total delivered cost of U.S.‐produced silicon
metal that is accounted for by U.S. inland transportation costs? percent
Who generally arranges the transportation to your firm’s customers’ locations?
Your firm Purchaser (check one)
Indicate the approximate percentage of your firm’s sales of silicon metal that are
delivered the following distances from its production facility.
Distance from production facility
Share
Within 100 miles
%
101 to 1,000 miles
%
Over 1,000 miles
%
Total (should sum to 100.0%)
0.0 %
IV‐10. Geographical shipments.‐‐In which U.S. geographic market area(s) has your firm sold its U.S.‐
produced silicon metal since January 1, 2014 (check all that apply)?
Geographic area
√ if applicable
Northeast.–CT, ME, MA, NH, NJ, NY, PA, RI, and VT.
Midwest.–IL, IN, IA, KS, MI, MN, MO, NE, ND, OH, SD, and WI.
Southeast.–AL, DE, DC, FL, GA, KY, MD, MS, NC, SC, TN, VA, and WV.
Central Southwest.–AR, LA, OK, and TX.
Mountains.–AZ, CO, ID, MT, NV, NM, UT, and WY.
Pacific Coast.–CA, OR, and WA.
Other.–All other markets in the United States not previously listed,
including AK, HI, PR, and VI.
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 39
IV‐11. End uses.‐‐List the end uses of the silicon metal that your firm manufactures. For each end‐use
product, what percentage of the total cost is accounted for by silicon metal and other inputs?
Share of total cost of end use product
accounted for by
Total
(should sum to
100.0% across)
End use product
Silicon metal
Other inputs
%
%
0.0 %
%
%
0.0 %
%
%
0.0 %
IV‐12. Substitutes.‐‐Can other products be substituted for silicon metal?
No
Yes‐‐Please fill out the table.
End use in which this
substitute is used
Substitute
Have changes in the price of this substitute
affected the price for silicon metal?
No Yes
Explanation
1.
2.
3.
IV‐13. Demand trends.‐‐Indicate how demand within the United States and outside of the United
States (if known) for silicon metal has changed since January 1, 2014. Explain any trends and
describe the principal factors that have affected these changes in demand.
Overall
No
Overall
increase change decrease
Market
Fluctuate
with no
clear trend
Explanation and factors
Within the United States
Outside the United States
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 40
IV‐14. Product changes.‐‐Have there been any significant changes in the product range, product mix,
or marketing of silicon metal since January 1, 2014?
No
Yes
If yes, please describe and quantify if possible.
IV‐15. Conditions of competition.‐‐
(a) Is the silicon metal market subject to business cycles (other than general economy‐wide
conditions) and/or other conditions of competition distinctive to silicon metal? If yes,
describe.
Check all that apply.
Please describe.
No
Skip to question IV‐16.
Yes‐Business cycles (e.g.
seasonal business)
Yes‐Other distinctive
conditions of competition
(b) If yes, have there been any changes in the business cycles or conditions of competition for
silicon metal since January 1, 2014?
No
Yes
If yes, describe.
IV‐16. Supply constraints.‐‐Has your firm refused, declined, or been unable to supply silicon metal
since January 1, 2014 (examples include placing customers on allocation or “controlled order
entry,” declining to accept new customers or renew existing customers, delivering less than the
quantity promised, been unable to meet timely shipment commitments, etc.)?
No
Yes
If yes, please describe.
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 41
IV‐17. Raw materials. ‐‐
(a) How have silicon metal raw material prices changed since January 1, 2014?
Fluctuate
Explain, noting how raw material price changes
Overall
with no
have affected your firm’s selling prices for silicon
Overall
No
metal.
increase change decrease clear trend
(b) How have electricity costs changed since January 1, 2014?
Fluctuate Explain how electricity price changes have affected
Overall
with no
your firm’s selling prices for silicon metal.
Overall
No
increase change decrease clear trend
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 42
IV‐18. Interchangeability.‐‐Is silicon metal produced in the United States and in other countries
interchangeable (i.e., can they physically be used in the same applications)?
Please indicate A, F, S, N, or 0 in the table below:
A = the products from a specified country‐pair are always interchangeable
F = the products are frequently interchangeable
S = the products are sometimes interchangeable
N = the products are never interchangeable
0 = no familiarity with products from a specified country‐pair
Country‐pair
United States
Australia
Brazil
Kazakhstan
Norway
Canada
South
Africa
Other
countries
Australia
Brazil
Kazakhstan
Norway
Canada
South Africa
For any country‐pair producing silicon metal that is sometimes or never interchangeable, identify the
country‐pair and explain the factors that limit or preclude interchangeable use:
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 43
IV‐19. Factors other than price.‐‐Are differences other than price (e.g., quality, availability,
transportation network, product range, technical support, etc.) between silicon metal produced
in the United States and in other countries a significant factor in your firm’s sales of the
products?
Please indicate A, F, S, N, or 0 in the table below:
A = such differences are always significant
F = such differences are frequently significant
S = such differences are sometimes significant
N = such differences are never significant
0 = no familiarity with products from a specified country‐pair
Country‐pair
United States
Australia
Brazil
Kazakhstan
Norway
Canada
South
Africa
Other
countries
Australia
Brazil
Kazakhstan
Norway
Canada
South Africa
For any country‐pair for which factors other than price always or frequently are a significant factor in your
firm’s sales of silicon metal, identify the country‐pair and report the advantages or disadvantages imparted
by such factors:
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 44
IV‐20. Customer identification.‐‐List the names and contact information for your firm’s 10 largest U.S.
customers for silicon metal since January 1, 2014. Indicate the share of the quantity of your
firm’s total shipments of silicon metal that each of these customers accounted for in 2016.
Customer’s name
City
State
Share of 2016 sales
(%)
1
2
3
4
5
6
7
8
9
10
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 45
IV‐21. Competition from imports
(a)
Lost revenue.‐‐Since January 1, 2014: To avoid losing sales to competitors selling silicon
metal from Australia, Brazil, Kazakhstan, and Norway, did your firm:
Item
No
Yes
(b)
Reduce prices
Roll back announced price increases
Lost sales.‐‐Since January 1, 2014: Did your firm lose sales of silicon metal to imports of
this product from Australia, Brazil, Kazakhstan, and Norway?
No
Yes
IV‐22. Other explanations.‐‐If your firm would like to further explain a response to a question in Part
IV that did not provide a narrative response box, please note the question number and the
explanation in the space provided below. Please also use this space to highlight any issues your
firm had in providing the data in this section, including but not limited to technical issues with
the MS Word questionnaire.
Contains Business Proprietary Information
U.S. Producers’ Questionnaire ‐ Silicon Metal (Final)
Page 46
HOW TO FILE YOUR QUESTIONNAIRE RESPONSE
This questionnaire is available as a “fillable” form in MS Word format on the
Commission’s website at:
Please do not attempt to modify the format or permissions of the questionnaire
document. Please submit the completed questionnaire using one of the methods noted
below. If your firm is unable to complete the MS Word questionnaire or cannot use one
of the electronic methods of submission, please contact the Commission for further
instructions.
https://www.usitc.gov/investigations/title_7/2017/silicon_metal_australia_brazil_kazak
hstan_and/final.htm.
• Upload via Secure Drop Box.‐‐Upload the MS Word questionnaire along with a scanned copy of the
signed certification page (page 1) through the Commission’s secure upload facility:
Web address: https://dropbox.usitc.gov/oinv/
Pin: ABKN
• E‐mail.‐‐E‐mail the MS Word questionnaire to [email protected]; include a scanned copy of
the signed certification page (page 1). Submitters are strongly encouraged to encrypt nonpublic
documents that are electronically transmitted to the Commission to protect your sensitive information
from unauthorized disclosure. The USITC secure drop‐box system and the Electronic Document
Information System (EDIS) use Federal Information Processing Standards (FIPS) 140‐2 cryptographic
algorithms to encrypt data in transit. Submitting your nonpublic documents by a means that does not
use these encryption algorithms (such as by email) may subject your firm’s nonpublic information to
unauthorized disclosure during transmission. If you choose a non‐encrypted method of electronic
transmission, the Commission warns you that the risk of such possible unauthorized disclosure is
assumed by you and not by the Commission.
If your firm does not produce this product, please fill out page 1, print, sign, and submit a scanned copy
to the Commission.
Parties to this proceeding.‐‐If your firm is a party to this proceeding, it is required to serve a copy of the
completed questionnaire on parties to the proceeding that are subject to administrative protective
order (see 19 CFR § 207.7). A list of such parties may be obtained from the Commission’s Secretary (202‐
205‐1803). A certificate of service must accompany the completed questionnaire you submit (see 19 CFR
§ 207.7). Service of the questionnaire must be made in paper form.
| File Type | application/pdf |
| File Title | Microsoft Word - US producer--Silicon metal (F) |
| Author | lawrence.jones |
| File Modified | 2017-10-10 |
| File Created | 2017-10-10 |