18-4-3839 Foreign producers' questionnaire

OMB No. 3117-0016/USITC No. 18-4-xxxx; Expiration Date: : 6/30/2020

(No response is required if currently valid OMB control number is not displayed)

FOREIGN PRODUCERS’/EXPORTERS’ QUESTIONNAIRE

STAINLESS STEEL FLANGES FROM CHINA AND INDIA

This questionnaire must be received by the Commission by March 5, 2018

See last page for filing instructions.

The information called for in this questionnaire is for use by the United States International Trade Commission in connection with its countervailing and antidumping duty investigations concerning stainless steel flanges from China and India (Inv. Nos. 701-TA-585-586 and 731-TA-1383-1384 (Final)).The information requested in the questionnaire is requested under the authority of the Tariff Act of 1930, title VII.

Name of firm      

Address      

Website      

Has your firm produced or exported stainless steel flanges (as defined on next page) at any time since January 1, 2015?

NO (Sign the certification below and promptly return only this page of the questionnaire to the Commission)

YES (Complete all parts of the questionnaire, and return the entire questionnaire to the Commission)

Data reported in this questionnaire relate to (Check one):

CHINA INDIA

Return questionnaire via the Commission Drop Box by clicking on the following link: https://dropbox.usitc.gov/oinv/. (PIN: SSF)

CERTIFICATION

I certify that the information herein supplied in response to this questionnaire is complete and correct to the best of my knowledge and belief and understand that the information submitted is subject to audit and verification by the Commission. By means of this certification I also grant consent for the Commission, and its employees and contract personnel, to use the information provided in this questionnaire and throughout this proceeding in any other import-injury proceedings conducted by the Commission on the same or similar merchandise.

I, the undersigned, acknowledge that information submitted in response to this request for information and throughout this proceeding or other proceedings may be disclosed to and used: (i) by the Commission, its employees and Offices, and contract personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits, reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C. Appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. I understand that all contract personnel will sign appropriate nondisclosure agreements

                 

Name of Authorized Official Title of Authorized Official Date

Phone:            

Signature Email address

Fax:      

PART I.—GENERAL INFORMATION

Background.--This proceeding was instituted in response to a petition filed on August 16, 2018, by Core Pipe Products, Inc., Carol Stream, Illinois and Maass Flange Corporation, Houston, Texas. Antidumping and Countervailing duties may be assessed on the subject imports as a result of these proceedings if the Commission makes an affirmative determination of injury, threat, or material retardation, and if the U.S. Department of Commerce (“Commerce”) makes an affirmative determination of dumping and subsidization. Questionnaires and other information pertinent to this proceeding are available at http://www.usitc.gov/investigations/701731/2018/stainless_steel_flanges_china_and_india/final.htm.

Stainless steel flanges covered by these investigations are certain forged stainless steel flanges, whether unfinished, semi-finished, or finished, generally manufactured to the material specification of ASTM/ASME A/SA182, and made in alloys such as, but not limited to, 304, 304L, 316, and 316L (or combinations thereof). The scope includes six general types of flanges. They are: (1) weld neck, used in butt-weld line connection; (2) threaded, used for threaded line connections; (3) slip-on, used to slide over pipe; (4) lap joint, used with stub-ends/butt-weld line connections; (5) socket weld, used to fit pipe into a machine recession; and (6) blind, used to seal off a line. The sizes and descriptions of the flanges within the scope include all pressure classes of ASME B16.5 and range from one-half inch to twenty-four inches nominal pipe size (“NPS”). Specifically excluded from the scope of these orders are cast stainless steel flanges. Cast stainless steel flanges generally are manufactured to specification ASTM A351.

Unfinished stainless steel flanges possess the approximate shape of finished stainless steel flanges and have not yet been machined to final specification after the initial casting, forging, or like operations. These machining processes may include boring, facing, spot facing, drilling, tapering, threading, beveling, heating, or compressing.

The country of origin for certain forged stainless steel flanges, whether unfinished, semi-finished, or finished is the country where the flange was forged. Subject merchandise includes stainless steel flanges as defined above that have been further processed in a third country, including but not limited to processing such as boring, facing, spot facing, drilling, tapering, threading, beveling, heating, or compressing, or any other processing that would not otherwise remove the merchandise from the scope of the investigations if performed in the country of manufacture of the stainless steel flanges.

Merchandise subject to the investigations is typically imported under subheadings 7307.21.1000 and 7307.21.5000 of the Harmonized Tariff Schedule of the United States (HTS). While HTS subheadings are provided for convenience and customs purposes, the written description of the scope is dispositive.

Stainless steel flanges excluded by NPS have a NPS less than 0.5 inches or greater than 24 inches but otherwise meet the definition of stainless steel flanges in the scope.

Reporting of information.--If information is not readily available from your records, provide carefully prepared estimates. If your firm is completing more than one questionnaire (i.e., a producer, importer, purchaser and/or foreign producer questionnaire), you need not respond to duplicated questions.

Confidentiality.--The commercial and financial data furnished in response to this questionnaire that reveal the individual operations of your firm will be treated as confidential by the Commission to the extent that such data are not otherwise available to the public and will not be disclosed except as may be required by law (see 19 U.S.C. §1677f). Such confidential information will not be published in a manner that will reveal the individual operations of your firm; however, general characterizations of numerical business proprietary information (such as discussion of trends) will be treated as confidential business information only at the request of the submitter for good cause shown.

Verification.‑‑The information submitted in this questionnaire is subject to audit and verification by the Commission. To facilitate possible verification of data, please keep all files, worksheets, and supporting documents used in the preparation of the questionnaire response. Please also retain a copy of the final document that you submit.

Release of information.--The information provided by your firm in response to this questionnaire, as well as any other business proprietary information submitted by your firm to the Commission in connection with this proceeding, may become subject to, and released under, the administrative protective order provisions of the Tariff Act of 1930 (19 U.S.C. § 1677f) and section 207.7 of the Commission’s Rules of Practice and Procedure (19 CFR § 207.7). This means that certain lawyers and other authorized individuals may temporarily be given access to the information for use in connection with this proceeding or other import-injury proceedings conducted by the Commission on the same or similar merchandise; those individuals would be subject to severe penalties if the information were divulged to unauthorized individuals.

Valid number error messages.--If you are completing this form in a country that uses periods (“.”) to delineate multiples of 1000 (e.g., one million would appear as $1.000.000 rather than $1,000,000), you may be unable to enter in numbers greater than 999 in numeric form fields. The solution to this data entry issue is to temporarily change your operating system’s number formatting to be consistent with the U.S. number formatting system while you complete this form. Detailed instructions on how to resolve this issue is provided at the end of this questionnaire and is available upon request from Celia Feldpausch (202-205-2387, [email protected]).

I-1. OMB statistics.--Please report below the actual number of hours required and the cost to your firm of completing this questionnaire.

Hours	Dollars
     	     

The questions in this questionnaire have been reviewed with market participants to ensure that issues of concern are adequately addressed and that data requests are sufficient, meaningful, and as limited as possible. Public reporting burden for this questionnaire is estimated to average 20 hours per response, including the time for reviewing instructions, gathering data, and completing and reviewing the questionnaire.

We welcome comments regarding the accuracy of this burden estimate, suggestions for reducing the burden, and any suggestions for improving this questionnaire. Please attach such comments to your response or send to the Office of Investigations, USITC, 500 E St. SW, Washington, DC 20436.

I-2. Establishments covered.--Provide the name and address of establishment(s) covered by this questionnaire. If your firm is publicly traded, please specify the stock exchange and trading symbol.

“Establishment”-- Each facility of a firm in China and India involved in the production or export of stainless steel flanges, including auxiliary facilities operated in conjunction with (whether or not physically separate from) such facilities. Firms operating more than one establishment in China and India should combine the data for all establishments into a single report.

     

I-3. Related producers.--Does your firm or any related firm produce, have the capability to produce, or have any plans to produce stainless steel flanges in the United States or other countries?

No Yes--Please name the firm(s) and country(ies) below and, if U.S. producer(s), ensure that they complete the Commission’s producer questionnaire.

     

I-4. Related U.S. importers.--Does your firm or any related firm import or have any plans to import stainless steel flanges into the United States?

No Yes--Please name the firm(s) below and ensure that they complete the Commission’s importer questionnaire.

     

I-5. U.S. importers.--Please provide the names, street addresses (not P.O. boxes), contacts, telephone numbers, and e-mail addresses of the FIVE largest U.S. importers of your firm’s stainless steel flanges in 2017.

Importer’s name		Contact person	E­mail	Telephone	Share of your firm’s 2017 U.S. exports (%)
1	     	     	     	     	     
2	     	     	     	     	     
3	     	     	     	     	     
4	     	     	     	     	     
5	     	     	     	     	     

PART II.--TRADE AND RELATED INFORMATION

Further information on this part of the questionnaire can be obtained from Justin Enck (202-205-3363, [email protected]). Supply all data requested on a calendar-year basis.

II-1. Contact information.--Please identify the responsible individual and the manner by which Commission staff may contact that individual regarding the confidential information submitted in Part II.

Name	     
Title	     
Email	     
Telephone	     
Fax	     

II-2. Changes in operations.--Please indicate whether your firm has experienced any of the following changes in relation to the production of stainless steel flanges since January 1, 2015.

(check as many as appropriate)		(If checked, please describe; leave blank if not applicable)
	plant openings	     
	plant closings	     
	relocations	     
	expansions	     
	acquisitions	     
	consolidations	     
	prolonged shutdowns or production curtailments	     
	revised labor agreements	     
	other (e.g., technology)	     

II-3. Anticipated changes in operations.--Does your firm anticipate any changes in the character of its operations or organization (as noted above) relating to the production of stainless steel flanges in the future?

No Yes–Supply details as to the time, nature, and significance of such changes and provide underlying assumptions, along with relevant portions of business plans or other supporting documentation that address this issue. Include in the response a specific projection of your firm’s capacity to produce stainless steel flanges (in 1,000 pounds) for 2018 and 2019.

     

II-4a. Production using same machinery.-- Please report your firm’s production of products made on the same equipment and machinery used to produce stainless steel flanges, and the combined production capacity on this shared equipment and machinery.

“Overall production capacity” or “capacity” –The level of production that your establishment(s) could reasonably have expected to attain during the specified periods for all products manufactured in that establishment using the same manufacturing equipment. Assume normal operating conditions (i.e., using equipment and machinery in place and ready to operate; normal operating levels (hours per week/weeks per year) and time for downtime, maintenance, repair, and cleanup).

“Production” --All production in your establishment(s) in China and India, including production consumed internally within your firm.

Quantity (in 1,000 pounds)
Item	Calendar years
	2015	2016	2017
Overall production capacity1	     	     	     
Production: Stainless steel flanges1	 0	 0	 0
Products not covered: Stainless steel flanges excluded by NPS2	     	     	     
Other products3	     	     	     
Subtotal, products not covered	 0	 0	 0
Total	 0	 0	 0
1 Data entered for production of stainless steel flanges will populate here once reported in question II-9. 2 Stainless steel flanges excluded by NPS have an NPS less than 0.5 inches or greater than 24 inches (as these are excluded from the definition of covered stainless steel flanges on page 2). 3 Please identify these products:      .

II-4b. Operating parameters.--The production capacity reported in II-4a is based on operating       hours per week,       weeks per year.

II-4c. Capacity calculation.--Please describe the methodology used to calculate overall production capacity reported in II-4a, and explain any changes in reported capacity.

     

II-4d. Production constraints.--Please describe the constraint(s) that set the limit(s) on your firm’s production capacity.

     

II-4e. Product shifting.—

(i). Is your firm able to switch production (capacity) between stainless steel flanges and other products using the same equipment and/or labor?

No Yes--(i.e., have produced other products or are able to produce other
products). Please identify other actual or potential products:
      .

(ii). Please describe the factors that affect your firm’s ability to shift production capacity between products (e.g., time, cost, relative price change, etc.), and the degree to which these factors enhance or constrain such shifts.

     

II-5. Share of sales.--What percentage of your firm’s total sales in its most recent fiscal year was represented by sales of stainless steel flanges?       percent.

II-6. Firm's estimated share of production in China and India.--Please estimate the percentage of total production of stainless steel flanges in the country specified on the certification page accounted for by your firm’s production in 2017.       percent.

II-7. Firm's estimated share of country's exports.--Please estimate the percentage of total exports to the United States of stainless steel flanges from the country specified on the certification page accounted for by your firm’s exports in 2017.       percent.

II-8. Third country trade actions.--Is the stainless steel flanges exported by your firm subject to antidumping/countervailing duty/safeguard findings, remedies, or proceedings?

No Yes--List the products(s), countries affected, and the date of such findings/remedies/proceedings.

     

II-9. Trade data.--Report your firm’s production capacity, production, shipments, and inventories related to the production of stainless steel flanges in your establishment(s) in China and India during the specified periods. Do not include resales of stainless steel flanges that your firm did not produce in this question; those data to the degree they are exported to the United States should only be reported in question II-10.

Do not submit data by manufacturing facility if they are in the same country. If your firm has multiple manufacturing establishments within one country, you are required to combine data for those establishments within one foreign producer questionnaire response.

Do not submit data on multiple countries combined. The establishments reported here should all be located in the country of the firm’s address reported on the certification page. Multinational companies with production in multiple subject countries should submit separate foreign producer questionnaire responses for each subject country.

“Average production capacity” or “capacity” –The level of production that your establishment(s) could reasonably have expected to attain during the specified periods for all products manufactured in that establishment using the same manufacturing equipment. Assume normal operating conditions (i.e., using equipment and machinery in place and ready to operate; normal operating levels (hours per week/weeks per year) and time for downtime, maintenance, repair, and cleanup; and a typical or representative product mix).

“Production” --All production in your establishment(s) in China and India, including production consumed internally within your firm.

“Shipments”--Shipments of products produced in your establishment(s) in China and India. Quantities reported should be net of returns.

“Home market commercial shipments”--Shipments, other than internal consumption and

transfers to related firms, within China and India.

“Home market internal consumption/transfers to related firms”--Shipments made to related firms in China and India, including product consumed internally by your firm.

“Export shipments”--Shipments to destinations outstide of the country indicacted on page 1 (China and India), including shipments to related firms.

“Inventories”--Finished goods inventory, not raw materials or work-in-progress.

“Unfinished”--Stainless steel flanges that have been initially forged but not otherwise processed after forging.

“Semi-finished”--Stainless steel flanges that have been initially forged, and undergone some processing but are not fully finished and ready for an end use.

“Finished”--Stainless steel flanges are fully forged and finished and ready to be used by an end user.

Note: As requested in Part I of this questionnaire, please keep all supporting documents/records used in the preparation of the trade data, as Commission staff may contact your firm regarding questions on the trade data. The Commission may also request that your company submit copies of the supporting documents/records (such as production and sales schedules, inventory records, etc.) used to compile these data.

II-9a. Trade data.--Continued.

Quantity (in 1,000 pounds)
Item	Actual experience			Projections1
	Calendar year			Calendar year
	2015	2016	2017	2018	2019
Average production capacity2 (A)	     	     	     	     	     
Beginning-of-period inventories (B)	     	     	     	     	     
Production (C)	     	     	     	     	     
Home market shipments: Internal consumption/ transfers (D)	     	     	     	     	     
Commercial shipments (E)	     	     	     	     	     
Exports to the United States (F)	     	     	     	     	     
Exports to Canada (G)	     	     	     	     	     
Exports to Philippines(H)	     	     	     	     	     
Exports to all other markets3 (I)	     	     	     	     	     
Total exports (J) (should equal F+G+H+I)	 0	 0	 0	 0	 0
Total shipments (K) (should equal D+E+F+G+H+I)	 0	 0	 0	 0	 0
End-of-period inventories (L)	     	     	     	     	     
1 Please explain the basis for your firm’s projections.      . 2 The production capacity reported is based on operating       hours per week,       weeks per year. Please describe the methodology used to calculate production capacity, and explain any changes in reported capacity.      . 3 Identify principal other export markets.      .

II-9a. Trade data.—Continued.

RECONCILIATION OF SHIPMENTS, PRODUCTION, AND INVENTORY.--Generally, the data reported for the end-of-period inventories (i.e., line J) should be equal to the beginning-of-period inventories (i.e., line B), plus production (i.e., line C), less total shipments (i.e., lines D, E, F, and G). Please ensure that any differences are not due to data entry errors in completing this form, but rather actually reflect your firm’s records; and also provide any likely explanations for any differences (e.g., theft, loss, damage, record systems issues, etc.) if they exist.

Item	Actual experience			Projections
	Calendar year			Calendar year
	2015	2016	2017	2018	2019
B + C – D – E – F –G – H – I – L = should equal zero ("0") or provide an explanation.1	 0	 0	 0	 0	 0
1 Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are nonetheless accurate.      

II-9b. Exports by type.--Report your firm’s exports of stainless steel flanges by type during the specified periods.

Quantity (in 1,000 pounds)
Item	Calendar years
	2015	2016	2017
Export shipments: Unfinished: United States (M)	     	     	     
Canada (N)	     	     	     
Philippines (O)	     	     	     
All other markets (P)	     	     	     
Semi-finished: United States (Q)	     	     	     
Canada (R)	     	     	     
Philippines (S)	     	     	     
All other markets (T)	     	     	     
Finished: United States (U)	     	     	     
Canada (V)	     	     	     
Philippines (W)	     	     	     
All other markets (X)	     	     	     

RECONCILIATION OF EXPORTS.--Please ensure that the quantities reported for exports in this question (i.e., lines M through X) in each time period equal the quantity reported for exports in part “a” of this question (i.e., lines F through I) in each time period. If the calculated fields below return values other than zero (i.e., “0”), the data reported must be revised prior to submission to the Commission.

Reconciliation	Calendar years
	2015	2016	2017
United States: M + Q +U– F = zero ("0"), if not revise.1	 0	 0	 0
Canada: N + R + V – G = zero ("0"), if not revise.1	 0	 0	 0
Philippines: O + S + W– H = zero ("0"), if not revise.1	 0	 0	 0
All other markets: P + T + X– I = zero ("0"), if not revise.1	 0	 0	 0

II-10. Exports to the United States not produced by your firm.--Report your firm’s exports to the United States of stainless steel flanges that were produced in China and India but not by your firm during the specified periods. Note these data should not be included in question II-9.

Quantity (in 1,000 pounds)
Item	Actual experience			Projections
	Calendar year			Calendar year
	2015	2016	2017	2018	2019
Exports of stainless steel flanges to the United States not produced by your firm1	     	     	     	     	     
1 List the producer(s).       .

II-11. Other explanations.--If your firm would like to further explain a response to a question in Part II that did not provide a narrative box, please note the question number and the explanation in the space provided below. Please also use this space to highlight any issues your firm had in providing the data in this section, including but not limited to technical issues with the MS Word questionnaire.

     

Correcting Valid number error messages.--If you are completing a Commission questionnaire in a country that uses periods (“.”) to delineate multiples of 1000 (e.g., one million would appear as $1.000.000 instead of as $1,000,000), you may be unable to enter in numbers greater than 999 in numeric form fields. This issues stem from your computer number formatting setting (e.g., not the MS Word document itself, but the computer from which you are opening up the document).  In the United States commas (,) delineate multiples of 1000 and periods (.) delineate fractions less than one.  Many EU countries use the reverse where multiples of 1000 are delineated with periods (.) and fractions less than one are delineated with commas (,). The US International Trade Commission’s questionnaires are set-up in the United States with the U.S. number formatting. When this formatting interacts with a computer set to EU number formatting, we believe this may cause this issue. 

The solution to this data entry issue is to temporarily change your operating system’s number formatting to be consistent with the U.S. number formatting system while you complete the questionnaire.

To temporarily change your computer’s number settings to U.S. settings, please do the following (for Microsoft Windows Operating system):

• START

• Control Panel

• Region and Language (under Clock, Language, and Region category)

• Format tab

• Change the Format from your existing one (e.g. “Italian (Italy)”) to “English (United States)” (see screen shots below)

When you do this the number “twelve million dollars and thirty five cents” would change from $12.000.000,35 (Italy format) to $12,000,000.35 (U.S. format), and then there will be no conflict with the USITC foreign producer questionnaire form.  When you finish reporting the data then you can close the questionnaire and switch back to Italy settings.

HOW TO FILE YOUR QUESTIONNAIRE RESPONSE

This questionnaire is available as a “fillable” form in MS Word format on the Commission’s website at: http://www.usitc.gov/investigations/701731/2018/stainless_steel_flanges_china_and_india/final.htm.

Please do not attempt to modify the format or permissions of the questionnaire document. Please submit the completed questionnaire using one of the methods noted below. If your firm is unable to complete the MS Word questionnaire or cannot use one of the electronic methods of submission, please contact the Commission for further instructions.

• Upload via Secure Drop Box.—Upload the MS Word questionnaire along with a scanned copy of the signed certification page (page 1) through the Commission’s secure upload facility:

Web address: https://dropbox.usitc.gov/oinv/ Pin: SSF

• E-mail.—E-mail your questionnaire to [email protected]; include a scanned copy of the signed certification page (page 1). Submitters are strongly encouraged to encrypt nonpublic documents that are electronically transmitted to the Commission to protect your sensitive information from unauthorized disclosure. The USITC secure drop-box system and the Electronic Document Information System (EDIS) use Federal Information Processing Standards (FIPS) 140-2 cryptographic algorithms to encrypt data in transit. Submitting your nonpublic documents by a means that does not use these encryption algorithms (such as by email) may subject your firm’s nonpublic information to unauthorized disclosure during transmission. If you choose a non-encrypted method of electronic transmission, the Commission warns you that the risk of such possible unauthorized disclosure is assumed by you and not by the Commission.

If your firm did not produce or export this product, please fill out page 1, print, sign, and submit a scanned copy to the Commission.

Parties to this proceeding.—If your firm is a party to this proceeding, you are required to serve a copy of the completed questionnaire on parties to the proceeding that are subject to administrative protective order (see 19 CFR § 207.7). A list of such parties may be obtained from the Commission’s Secretary (202-205-1803). A certificate of service must accompany the completed questionnaire you submit (see 19 CFR § 207.7). Service of the questionnaire must be made in paper form.