18-4-3991 Foreign producers' questionnaire

OMB No. 3117-0016/USITC No. 18-4-3991; Expiration Date: 6/30/2020
(No response is required if currently valid OMB control number is not displayed)

FOREIGN PRODUCERS’/EXPORTERS’ QUESTIONNAIRE
STEEL WHEELS FROM CHINA
This questionnaire must be received by the Commission by November 30th, 2018
See last page for filing instructions.
The information called for in this questionnaire is for use by the United States International Trade Commission in
connection with its countervailing duty and antidumping duty investigations concerning steel wheels from China
(Inv. Nos. 701-TA-602 and 731-TA-1412 (Final)). The information requested in the questionnaire is requested
under the authority of the Tariff Act of 1930, title VII.

Name of firm
Address
Website
Has your firm produced or exported steel wheels (as defined on next page) at any time since January 1, 2015?

NO

(Sign the certification below and promptly return only this page of the questionnaire to the Commission)

YES

(Complete all parts of the questionnaire, and return the entire questionnaire to the Commission)

Return questionnaire via the Commission Drop Box by clicking on the following link:
https://dropbox.usitc.gov/oinv/. (PIN: WHEEL)
CERTIFICATION
I certify that the information herein supplied in response to this questionnaire is complete and correct to the best of my
knowledge and belief and understand that the information submitted is subject to audit and verification by the Commission. By
means of this certification I also grant consent for the Commission, and its employees and contract personnel, to use the
information provided in this questionnaire and throughout this proceeding in any other import-injury proceedings conducted by
the Commission on the same or similar merchandise.
I, the undersigned, acknowledge that information submitted in response to this request for information and throughout this
proceeding or other proceedings may be disclosed to and used: (i) by the Commission, its employees and Offices, and contract
personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits,
reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C.
Appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. I understand that all
contract personnel will sign appropriate nondisclosure agreements.
Name of Authorized Official

Title of Authorized Official

Date

Phone:
Signature

Fax:

Email address

Business Proprietary
Foreign Producers’ Questionnaire – Steel wheels

Page 2

PART I.—GENERAL INFORMATION
Background. -- This proceeding was instituted in response to a petition filed on March 27, 2018, by
Accuride Corporation, Evansville, Indiana, and Maxion Wheels Akron LLC, Akron, Ohio. Countervailing
and/or antidumping duties may be assessed on the subject imports as a result of these proceedings if
the Commission makes an affirmative determination of injury, threat, or material retardation, and if the
U.S. Department of Commerce (“Commerce”) makes an affirmative determination of subsidization
and/or dumping. Questionnaires and other information pertinent to this proceeding are available at
https://www.usitc.gov/investigations/701731/2018/steel_wheels_china/final.htm.
Steel wheels covered by these investigations are certain on-the-road steel wheels, discs, and rims for
tubeless tires, with a nominal rim diameter of 22.5 inches and 24.5 inches, regardless of width. Certain
on-the-road steel wheels with a nominal wheel diameter of 22.5 inches and 24.5 inches are generally for
Class 6, 7, and 8 commercial vehicles (as classified by the Federal Highway Administration Gross Vehicle
Weight Rating system), including tractors, semi-trailers, dump trucks, garbage trucks, concrete mixers,
and buses, and are the current standard wheel diameters for such applications. The standard widths of
certain on-the-road steel wheels are 7.5 inches, 8.25 inches, and 9.0 inches, but all certain on-the-road
steel wheels, regardless of width, are covered by the scope. While 22.5 inches and 24.5 inches are
standard wheel sizes used by Class 6, 7, and 8 commercial vehicles, the scope covers sizes that may be
adopted in the future for Class 6, 7, and 8 commercial vehicles.
The scope includes certain on-the-road steel wheels with either a “hub-piloted” or “stud-piloted”
mounting configuration, and includes rims and discs for such wheels, whether imported as an assembly
or separately. The scope includes certain on-the-road steel wheels, discs, and rims, of carbon and/or
alloy steel composition, whether cladded or not cladded, whether finished or not finished, and whether
coated or uncoated. All on-the-road wheels sold in the United States are subject to the requirements of
the National Highway Traffic Safety Administration and bear markings, such as the “DOT” symbol,
indicating compliance with applicable motor vehicle standards. See 49 CFR 571.120. The scope includes
certain on- the-road steel wheels imported with or without the required markings. Certain on-the-road
steel wheels imported as an assembly with a tire mounted on the wheel and/or with a valve stem
attached are included. However, if the certain on-the-road steel wheel is imported as an assembly with
a tire mounted on the wheel and/or with a valve stem attached, the certain on- the-road steel wheel is
covered by the scope, but the tire and/or valve stem is not covered by the scope.
Excluded from the scope are:
(1) steel wheels for tube-type tires that require a removable side ring;
(2) aluminum wheels;
(3) wheels where steel represents less than fifty percent of the product by weight; and
(4) steel wheels that do not meet National Highway Traffic Safety Administration requirements, other
than the rim marking requirements found in 49 CFR 571.120S5.2.
Imports of the subject merchandise are currently classified under the following Harmonized Tariff
Schedule of the United States (HTSUS) subheadings: 8708.70.4530, 8708.70.4560, 8708.70.6030,
8708.70.6060, 8716.90.5045, and 8716.90.5059. Merchandise meeting the scope description may also
enter under the following HTSUS subheadings: 4011.20.1015, 4011.20.5020, and 8708.99.4850. While
HTSUS subheadings are provided for convenience and customs purposes, the written description of the
subject merchandise is dispositive.

Business Proprietary
Foreign Producers’ Questionnaire – Steel wheels

Page 3

Reporting of information.-- If information is not readily available from your records, provide carefully
prepared estimates. If your firm is completing more than one questionnaire (i.e., a producer, importer,
purchaser and/or foreign producer questionnaire), you need not respond to duplicated questions.
Confidentiality.--The commercial and financial data furnished in response to this questionnaire that
reveal the individual operations of your firm will be treated as confidential by the Commission to the
extent that such data are not otherwise available to the public and will not be disclosed except as may
be required by law (see 19 U.S.C. §1677f). Such confidential information will not be published in a
manner that will reveal the individual operations of your firm; however, general characterizations of
numerical business proprietary information (such as discussion of trends) will be treated as confidential
business information only at the request of the submitter for good cause shown.
Verification.--The information submitted in this questionnaire is subject to audit and verification by the
Commission. To facilitate possible verification of data, please keep all files, worksheets, and supporting
documents used in the preparation of the questionnaire response. Please also retain a copy of the final
document that you submit.
Release of information.--The information provided by your firm in response to this questionnaire, as
well as any other business proprietary information submitted by your firm to the Commission in
connection with this proceeding, may become subject to, and released under, the administrative
protective order provisions of the Tariff Act of 1930 (19 U.S.C. § 1677f) and section 207.7 of the
Commission’s Rules of Practice and Procedure (19 CFR § 207.7). This means that certain lawyers and
other authorized individuals may temporarily be given access to the information for use in connection
with this proceeding or other import-injury proceedings conducted by the Commission on the same or
similar merchandise; those individuals would be subject to severe penalties if the information were
divulged to unauthorized individuals.
Valid number error messages.--If you are completing this form in a country that uses periods (“.”) to
delineate multiples of 1000 (e.g., one million would appear as $1.000.000 rather than $1,000,000), you
may be unable to enter in numbers greater than 999 in numeric form fields. The solution to this data
entry issue is to temporarily change your operating system’s number formatting to be consistent with
the U.S. number formatting system while you complete this form. Detailed instructions on how to
resolve this issue is provided at the end of this questionnaire and is available upon request from Jordan
Harriman (202-205-2610, [email protected]).

Business Proprietary
Foreign Producers’ Questionnaire – Steel wheels
I-1.

Page 4

OMB statistics.--Please report below the actual number of hours required and the cost to your
firm of completing this questionnaire
Hours

Dollars

The questions in this questionnaire have been reviewed with market participants to ensure that
issues of concern are adequately addressed and that data requests are sufficient, meaningful,
and as limited as possible. Public reporting burden for this questionnaire is estimated to average
20 hours per response, including the time for reviewing instructions, gathering data, and
completing and reviewing the questionnaire.
We welcome comments regarding the accuracy of this burden estimate, suggestions for
reducing the burden, and any suggestions for improving this questionnaire. Please attach such
comments to your response or send to the Office of Investigations, USITC, 500 E St. SW,
Washington, DC 20436.
I-2.

Establishments covered.--Provide the name and address of establishment(s) covered by this
questionnaire. If your firm is publicly traded, please specify the stock exchange and trading
symbol.
“Establishment”-- Each facility of a firm in China involved in the production or export of steel
wheels, including auxiliary facilities operated in conjunction with (whether or not physically
separate from) such facilities. Firms operating more than one establishment in China should
combine the data for all establishments into a single report.

I-3.

Related producers.--Does your firm or any related firm produce, have the capability to produce,
or have any plans to produce steel wheels in the United States or other countries?

No

I-4.

Yes

If yes, please name the firm(s) and country(ies) below and, if U.S.
producer(s), ensure that they complete the Commission’s producer
questionnaire.:

Related U.S. importers.--Does your firm or any related firm import or have any plans to import
steel wheels into the United States?

No

Yes

If yes, please name the firm(s) below and ensure that they complete the
Commission’s importer questionnaire:

Business Proprietary
Foreign Producers’ Questionnaire – Steel wheels
I-5.

U.S. importers.--Please provide the names, contacts, telephone numbers, and e-mail addresses
of the FIVE largest U.S. importers of your firm’s steel wheels in 2017.

Importer’s name
1
2
3
4
5

Page 5

Contact person

Email

Telephone

Share of your
firm’s 2017 U.S.
exports (%)

Business Proprietary
Foreign Producers’ Questionnaire – Steel wheels

Page 6

PART II.--TRADE AND RELATED INFORMATION
Further information on this part of the questionnaire can be obtained from Jordan Harriman (202-2052610, [email protected]). Supply all data requested on a calendar-year basis.
II-1.

Contact information.--Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in part II.
Name
Title
Email
Telephone
Fax

II-2a.

Changes in operations.--Please indicate whether your firm has experienced any of the following
changes in relation to the production of steel wheels since January 1, 2015.
(check as many as appropriate)
plant openings
plant closings
relocations
expansions
acquisitions
consolidations
prolonged shutdowns or
production curtailments
revised labor agreements
other (e.g., technology)

(If checked, please describe; leave blank if not applicable)

Business Proprietary
Foreign Producers’ Questionnaire – Steel wheels
II-2b.

Anticipated changes in operations.--Does your firm anticipate any changes in the character of
its operations or organization (as noted above) relating to the production of steel wheels in the
future?

No

II-3a.

Page 7

Yes

If yes, supply details as to the time, nature, and significance of such
changes and provide underlying assumptions.

Production using same machinery.-- Please report your firm’s production of products using the
same equipment, machinery, or employees as used to produce steel wheels, and the combined
production capacity on this shared equipment, machinery, or employees in the periods
indicated.
“Overall production capacity” or “capacity” –The level of production that your
establishment(s) could reasonably have expected to attain during the specified periods for all
products manufactured in that establishment using the same manufacturing equipment.
Assume normal operating conditions (i.e., using equipment and machinery in place and ready to
operate; normal operating levels (hours per week/weeks per year) and time for downtime,
maintenance, repair, and cleanup).
Note.--If your firm does not produce any out-of-scope merchandise on the same machinery and
equipment as scope merchandise then the "overall production capacity" numbers reported in
this question should be exactly equal to the "average production capacity" numbers reported in
question II-9. If, however, your firm does produce out-of-scope merchandise using the same
machinery and equipment as scope mercandhise, then the "average production capacity"
reported in question II-9 should exclude the portion of "overall production capacity" that was
used to produce this out-of-scope merchandise.
“Production” --All production in your establishment(s) in China, including production consumed
internally within your firm.
Quantity (in actual number of wheels)
Calendar years
Item

2015

2016

January-September
2017

2017

2018

Overall production capacity
Production of:
Steel wheels1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

Out of scope production:
Other products2
Subtotal, out-of-scope
Total
1
2

Data entered for production of steel wheels will populate here once reported in question II-9.
Please identify these products:
.

Business Proprietary
Foreign Producers’ Questionnaire – Steel wheels
II-3b.

Page 8

Operating parameters.--The production capacity reported in II-3a is based on the following
operating paramaters:
Hours per week

Weeks per year

II-3c.

Capacity calculation.--Please describe the methodology used to calculate overall production
capacity reported in II-3a, and explain any changes in reported capacity.

II-3d.

Production constraints.--Please describe the constraint(s) that set the limit(s) on your firm’s
production capacity.

II-3e.

Product shifting.—
(i).

Is your firm able to switch production capacity between steel wheels and other products
using the same equipment and/or labor?

No

(ii).

Yes

If yes—(i.e., have produced other products or are able to produce other
products) Please identify other actual or potential products:

Please describe the factors that affect your firm’s ability to shift production capacity
between products (e.g., time, cost, relative price change, etc.), and the degree to which
these factors enhance or constrain such shifts.

Business Proprietary
Foreign Producers’ Questionnaire – Steel wheels
II-4.

Page 9

Wheel coatings.—
(i)

Please identify and describe the type(s) of coating applied to steel wheels produced by your
firm.
(check as many as appropriate)

(Description of specific coating)

Zinc phosphate
pretreatment
Epoxy E-coat

Other (non-epoxy) E-coat

Powder top coating

Galvanized plating

Other

(ii)

If multiple types of coating are applied to steel wheels produced by your firm, does your
firm offer combination(s) of coatings as part of its standard product offerings?
No

(iii)

Yes

If yes-- Please describe these combination(s) below.

Does your firm produce in-scope steel wheels that do not come with a coating applied?
No

Yes

If yes-- Please describe these steel wheels below.

Business Proprietary
Foreign Producers’ Questionnaire – Steel wheels

Page 10

II-5.

Share of sales.--What percentage of your firm’s total sales in its most recent fiscal year was
represented by sales of steel wheels?
percent.

II-6.

Firm's estimated share of production in China.--Please estimate the percentage of total production
of steel wheels in China accounted for by your firm’s production in 2017:
percent.

II-7.

Firm's estimated share of country's exports.--Please estimate the percentage of total exports to
the United States of steel wheels from China accounted for by your firm’s exports in 2017:
percent.

II-8.

Third country trade actions.--Are the steel wheels exported by your firm subject to
antidumping/countervailing duty/safeguard findings, remedies, or proceedings?

No

Yes

If yes--List the product(s), countries affected, and the date(s) of such
findings/remedies/proceedings.

Business Proprietary
Foreign Producers’ Questionnaire – Steel wheels
II-9.

Page 11

Trade data.--Report your firm’s production capacity, production, shipments, and inventories
related to the production of steel wheels in your establishment(s) in China during the specified
periods. Do not include resales of steel wheels that your firm did not produce in this question;
those data to the degree they are exported to the United States should only be reported in
question II-10.
Do not submit data by manufacturing facility if they are in the same country. If your firm has
multiple manufacturing establishments within one country, you are required to combine data
for those establishments within one foreign producer questionnaire response.
“Average production capacity” or “capacity” –The level of production that your
establishment(s) could reasonably have expected to attain during the specified periods for all
products manufactured in that establishment using the same manufacturing equipment.
Assume normal operating conditions (i.e., using equipment and machinery in place and ready to
operate; normal operating levels (hours per week/weeks per year) and time for downtime,
maintenance, repair, and cleanup; and a typical or representative product mix).
“Production” --All production in your establishment(s) in China, including production consumed
internally within your firm.
“Shipments”--Shipments of products produced in your establishment(s) in China. Quantities
reported should be net of returns.
“Home market commercial shipments”--Shipments, other than internal consumption and
transfers to related firms, within China.
“Home market internal consumption/transfers to related firms”--Shipments made to
related firms in China, including product consumed internally by your firm.
“Export shipments”--Shipments to destinations outstide of the country indicacted on page 1
(China), including shipments to related firms.
“Inventories”--Finished goods inventory, not raw materials or work-in-progress.
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records
used in the preparation of the trade data, as Commission staff may contact your firm regarding
questions on the trade data. The Commission may also request that your company submit copies
of the supporting documents/records (such as production and sales schedules, inventory records,
etc.) used to compile these data.

Business Proprietary
Foreign Producers’ Questionnaire – Steel wheels
II-9.

Page 12

Trade data.--Continued.
Quantity (in actual number of wheels)
Projections1

Actual experience
Calendar year
Item

2015

2016

January-September
2017

2017

2018

Calendar year
2018

2019

2

Average production capacity (A)
Beginning-of-period inventories (B)
Production (C)
Home market shipments:
Internal consumption/ transfers
(D)
Commercial shipments (E)
Exports to the United States (F)
Exports to all other markets3 (G)
Total exports (H)
(should equal F+G)

0

0

0

0

0

0

0

Total shipments (I)
(should equal D+E+F+G)

0

0

0

0

0

0

0

End-of-period inventories (J)
1

Please explain the basis for your firm’s projections.
.
The production capacity reported is based on operating
hours per week,
weeks per year. Please
describe the methodology used to calculate production capacity, and explain any changes in reported capacity.
3
Identify principal other export markets.
.
2

.

RECONCILIATION OF SHIPMENTS, PRODUCTION, AND INVENTORY.--Generally, the data reported for the
end-of-period inventories (i.e., line J) should be equal to the beginning-of-period inventories (i.e., line B),
plus production (i.e., line C), less total shipments (i.e., lines D, E, F, and G). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your firm’s
records; and also provide any likely explanations for any differences (e.g., theft, loss, damage, record
systems issues, etc.) if they exist.
Actual experience
Calendar year
Item

2015

2016

Projections

January-September
2017

2017

2018

Calendar year
2018

2019

B + C – D – E – F –G – J = should equal
zero ("0") or provide an explanation.1
0
0
0
0
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are nonetheless
accurate:

0

Business Proprietary
Foreign Producers’ Questionnaire – Steel wheels
II-10.

Page 13

Exports to the United States not produced by your firm.--Report your firm’s exports to the
United States of steel wheels that was produced in China but not by your firm during the
specified periods. Note these data should not be included in question II-9.
Quantity (in actual number of wheels)
Actual experience
Calendar year
Item

2015

2016

Projections

January-September
2017

2017

2018

Calendar year
2018

2019

Exports of steel wheels to the
United States not produced by
your firm1
1

List the producer(s).

.

Business Proprietary
Foreign Producers’ Questionnaire – Steel wheels
II-11.

Page 14

Supplier qualification.—
(a) Has your firm been qualified by any U.S. OEMs to supply steel wheels? If yes, please list all
OEMs for which your firm has qualified to supply Chinese steel wheels (if more lines are
needed, please continue in question II-12).
No

Name of OEM

Yes—fill out table below.

Date
qualified

Has your firm sold Chinese If no, please explain why your firm
steel wheels to this OEM for has not sold steel wheels to this
its vehicle manufacturing? OEM.
Yes

No

Business Proprietary
Foreign Producers’ Questionnaire – Steel wheels
II-11.

Page 15

Supplier qualification.--Continued.
(b) Has your firm attempted to achieve qualification to supply steel wheels with any U.S. OEM
customers but has not been approved? (If ‘yes’ and more lines are needed, please continue
in question II-12.)
No

Name of OEM

II-12.

Yes—fill out table below.

Date

Status of qualification process and/or reason(s) for
failure to qualify.

Other explanations.--If your firm would like to further explain a response to a question in Part II
that did not provide a narrative box, please note the question number and the explanation in
the space provided below. Please also use this space to highlight any issues your firm had in
providing the data in this section, including but not limited to technical issues with the MS Word
questionnaire.

Business Proprietary
Foreign Producers’ Questionnaire – Steel wheels

Page 16

Correcting Valid number error messages.--If you are completing a Commission

questionnaire in a country that uses periods (“.”) to delineate multiples of 1000 (e.g., one million would
appear as $1.000.000 instead of as $1,000,000), you may be unable to enter in numbers greater than
999 in numeric form fields. This issues stem from your computer number formatting setting (e.g., not
the MS Word document itself, but the computer from which you are opening up the document). In the
United States commas (,) delineate multiples of 1000 and periods (.) delineate fractions less than one.
Many EU countries use the reverse where multiples of 1000 are delineated with periods (.) and
fractions less than one are delineated with commas (,). The US International Trade Commission’s
questionnaires are set-up in the United States with the U.S. number formatting. When this formatting
interacts with a computer set to EU number formatting, we believe this may cause this issue.
The solution to this data entry issue is to temporarily change your operating system’s number
formatting to be consistent with the U.S. number formatting system while you complete the
questionnaire.
To temporarily change your computer’s number settings to U.S. settings, please do the following (for
Microsoft Windows Operating system):






START
Control Panel
Region and Language (under Clock, Language, and Region category)
Format tab
Change the Format from your existing one (e.g. “Italian (Italy)”) to “English (United States)” (see
screen shots below)

When you do this the number “twelve million dollars and thirty five cents” would change from
$12.000.000,35 (Italy format) to $12,000,000.35 (U.S. format), and then there will be no conflict with
the USITC foreign producer questionnaire form. When you finish reporting the data then you can close
the questionnaire and switch back to Italy settings.

Business Proprietary
Foreign Producers’ Questionnaire – Steel wheels

Page 17

HOW TO FILE YOUR QUESTIONNAIRE RESPONSE
This questionnaire is available as a “fillable” form in MS Word format on the
Commission’s website at:
https://www.usitc.gov/investigations/701731/2018/steel_wheels_china/final.htm.
Please do not attempt to modify the format or permissions of the questionnaire
document. Please submit the completed questionnaire using one of the methods noted
below. If your firm is unable to complete the MS Word questionnaire or cannot use one
of the electronic methods of submission, please contact the Commission for further
instructions.
• Upload via Secure Drop Box.—Upload the MS Word questionnaire along with a scanned copy of the
signed certification page (page 1) through the Commission’s secure upload facility:
Web address: https://dropbox.usitc.gov/oinv/

Pin: WHEEL

• E-mail.—E-mail your questionnaire to [email protected]; include a scanned copy of the
signed certification page (page 1). Submitters are strongly encouraged to encrypt nonpublic documents
that are electronically transmitted to the Commission to protect your sensitive information from
unauthorized disclosure. The USITC secure drop-box system and the Electronic Document Information
System (EDIS) use Federal Information Processing Standards (FIPS) 140-2 cryptographic algorithms to
encrypt data in transit. Submitting your nonpublic documents by a means that does not use these
encryption algorithms (such as by email) may subject your firm’s nonpublic information to unauthorized
disclosure during transmission. If you choose a non-encrypted method of electronic transmission, the
Commission warns you that the risk of such possible unauthorized disclosure is assumed by you and not
by the Commission.
If your firm did not produce or export this product, please fill out page 1, print, sign, and submit a
scanned copy to the Commission.
Parties to this proceeding.—If your firm is a party to this proceeding, you are required to serve a copy of
the completed questionnaire on parties to the proceeding that are subject to administrative protective
order (see 19 CFR § 207.7). A list of such parties may be obtained from the Commission’s Secretary (202205-1803). A certificate of service must accompany the completed questionnaire you submit (see 19 CFR
§ 207.7). Service of the questionnaire must be made in paper form.