Download:
pdf |
pdfOMB No. 3117-0016/USITC No. 19-4-4004; Expiration Date: 6/30/2020
(No response is required if currently valid OMB control number is not displayed)
FOREIGN PRODUCERS’/EXPORTERS’ QUESTIONNAIRE
FABRICATED STRUCTURAL STEEL
This questionnaire must be received by the Commission by February 15, 2019
See last page for filing instructions.
The information called for in this questionnaire is for use by the United States International Trade Commission in
connection with its countervailing duty and antidumping investigations concerning fabricated structural steel
from Canada, China, and Mexico (Inv. Nos. 701-TA-615-617 and 731-TA-1432-1434 (Preliminary)). The
information requested in the questionnaire is requested under the authority of the Tariff Act of 1930, title VII.
Name of firm
Address
Website
Has your firm produced or exported fabricated structural steel (as defined on next page) at any time since
January 1, 2015?
NO
(Sign the certification below and promptly return only this page of the questionnaire to the Commission)
YES
(Complete all parts of the questionnaire, and return the entire questionnaire to the Commission)
Data reported in this questionnaire relate to (Check one):
Canada
China
Mexico
Return questionnaire via the Commission Drop Box by clicking on the following link:
https://dropbox.usitc.gov/oinv/. (PIN: FABS)
CERTIFICATION
I certify that the information herein supplied in response to this questionnaire is complete and correct to the best of my
knowledge and belief and understand that the information submitted is subject to audit and verification by the Commission. By
means of this certification I also grant consent for the Commission, and its employees and contract personnel, to use the
information provided in this questionnaire and throughout this proceeding in any other import-injury proceedings conducted by
the Commission on the same or similar merchandise.
I, the undersigned, acknowledge that information submitted in response to this request for information and throughout this
proceeding or other proceedings may be disclosed to and used: (i) by the Commission, its employees and Offices, and contract
personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits,
reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C.
Appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. I understand that all
contract personnel will sign appropriate nondisclosure agreements.
Name of Authorized Official
Title of Authorized Official
Date
Signature
Phone
Email address
Business Proprietary
Foreign Producers’ Questionnaire – Fabricated Structural Steel
Page 2
PART I.—GENERAL INFORMATION
Background. --This proceeding was instituted in response to petitions filed on February 4, 2019, by the
American Institute of Steel Construction LLC, Chicago, IL. Countervailing and/or antidumping duties may
be assessed on the subject imports as a result of these proceedings if the Commission makes an
affirmative determination of injury, threat, or material retardation, and if the U.S. Department of
Commerce (“Commerce”) makes an affirmative determination of subsidization and/or dumping.
Questionnaires and other information pertinent to this proceeding are available at
https://www.usitc.gov/investigations/701731/2019/fabricated_structural_steel_canada_china_and/prel
iminary.htm.
Fabricated structural steel covered by these investigations includes carbon and alloy (including
stainless) steel products such as angles, columns, beams, girders, plates, flange shapes (including
manufactured structural shapes utilizing welded plates as a substitute for rolled wide flange sections),
channels, hollow structural section (“HSS”) shapes, base plates, plate-work components, and other steel
products that have been fabricated for assembly or installation into a structure (fabricated structural
steel). Fabrication includes, but is not limited to, cutting, drilling, welding, joining, bolting, bending,
punching, pressure fitting, molding, adhesion, and other processes.
Fabricated structural steel products included in the scope of these investigations are products in which:
(1) iron predominates, by weight, over each of the other contained elements; and (2) the carbon
content is two percent or less by weight.
Fabricated structural steel is covered by the scope of the investigations regardless of whether it is
painted, varnished, or coated with plastics or other metallic or non-metallic substances. Fabricated
structural steel may be either assembled; disassembled, but containing characteristics or items, such as
holes, fasteners, nuts, bolts, rivets, screws, tongue and grooves, hinges, or joints, so that the product(s)
may be joined, attached, or assembled to one or more additional product(s); or partially assembled,
such as into modules, modularized construction units, or sub-assemblies of fabricated structural steel.
Products under investigation include carbon and alloy steel products that have been fabricated for
erection or assembly into structures, including but not limited to, buildings (commercial, office,
institutional, and multi-family residential); industrial and utility projects; parking decks; arenas and
convention centers; medical facilities; and ports, transportation and infrastructure facilities.
Subject merchandise includes fabricated structural steel that has been assembled or further processed
in the subject country or a third country, including but not limited to painting, varnishing, trimming,
cutting, drilling, welding, joining, bolting, punching, bending, beveling, riveting, galvanizing, coating,
and/or slitting or any other processing that would not otherwise remove the merchandise from the
scope of the investigation if performed in the country of manufacture of the fabricated structural steel.
Fabricated structural steel may be attached, joined, or assembled with non-steel components at the
time of importation. The inclusion, attachment, joining, or assembly of non-steel components with
fabricated structural steel does not remove the fabricated structural steel from the scope.
Business Proprietary
Foreign Producers’ Questionnaire – Fabricated Structural Steel
Page 3
All products that meet the written physical description are within the scope of these investigations
unless specifically excluded. Specifically excluded from the scope of these investigations is certain
fabricated steel concrete reinforcing bar (“rebar”). Fabricated rebar is excluded from the scope only if
(i) it is a unitary piece of fabricated rebar, not joined, welded, or otherwise connected with any other
steel product or part; or (ii) it is joined, welded, or otherwise connected only to other rebar.
Also excluded from this scope is fabricated structural steel used for bridges and bridge sections. For the
purpose of this scope, fabricated structural steel used for bridges and bridge sections is defined as
fabricated structural steel that is used in bridges and bridge sections and that conforms to American
Association of State and Highway and Transportation Officials (“AASHTO”) bridge construction
requirements or any state or local derivatives of the AASHTO bridge construction requirements.
Also excluded from this scope are pre-engineered metal building systems. For the purposes of this
scope, pre-engineered metal building systems are defined as complete metal buildings that integrate
steel framing, roofing and walls to form one, pre-engineered building system and are designed and
manufactured to Metal Building Manufacturers Association guide specifications. Pre-engineered metal
building systems are typically limited in height to no more than 60 feet or two stories.
Also excluded from this scope are steel roof and floor decking systems designed and manufactured to
Steel Deck Institute standards.
Also excluded from the scope are open web steel bar joists and joist girders that are designed and
manufactured to Steel Joist Institute specifications.
Fabricated structural steel is currently imported under statistical reporting numbers 7308.90.9590,
7308.90.3000, and 7308.90.6000 of the Harmonized Tariff Schedule of the United States (“HTSUS”).
They may also be imported under HTSUS statistical reporting numbers 7216.91.0010, 7216.91.0090,
7216.99.0010, 7216.99.0090, 7228.70.6000, 7301.10.0000, 7301.20.1000, 7301.20.5000, 7308.40.0000,
7308.90.9530, and 9406.90.0030. The HTSUS provisions are for convenience and customs purposes; the
written description of the scope is dispositive.
Reporting of information.-- If information is not readily available from your records, provide carefully
prepared estimates. If your firm is completing more than one questionnaire (i.e., a producer, importer,
purchaser and/or foreign producer questionnaire), you need not respond to duplicated questions.
Confidentiality.--The commercial and financial data furnished in response to this questionnaire that
reveal the individual operations of your firm will be treated as confidential by the Commission to the
extent that such data are not otherwise available to the public and will not be disclosed except as may
be required by law (see 19 U.S.C. §1677f). Such confidential information will not be published in a
manner that will reveal the individual operations of your firm; however, general characterizations of
numerical business proprietary information (such as discussion of trends) will be treated as confidential
business information only at the request of the submitter for good cause shown.
Verification.--The information submitted in this questionnaire is subject to audit and verification by the
Commission. To facilitate possible verification of data, please keep all files, worksheets, and supporting
documents used in the preparation of the questionnaire response. Please also retain a copy of the final
document that you submit.
Business Proprietary
Foreign Producers’ Questionnaire – Fabricated Structural Steel
Page 4
Release of information.--The information provided by your firm in response to this questionnaire, as
well as any other business proprietary information submitted by your firm to the Commission in
connection with this proceeding, may become subject to, and released under, the administrative
protective order provisions of the Tariff Act of 1930 (19 U.S.C. § 1677f) and section 207.7 of the
Commission’s Rules of Practice and Procedure (19 CFR § 207.7). This means that certain lawyers and
other authorized individuals may temporarily be given access to the information for use in connection
with this proceeding or other import-injury proceedings conducted by the Commission on the same or
similar merchandise; those individuals would be subject to severe penalties if the information were
divulged to unauthorized individuals.
Valid number error messages.--If you are completing this form in a country that uses periods (“.”) to
delineate multiples of 1000 (e.g., one million would appear as $1.000.000 rather than $1,000,000), you
may be unable to enter in numbers greater than 999 in numeric form fields. The solution to this data
entry issue is to temporarily change your operating system’s number formatting to be consistent with
the U.S. number formatting system while you complete this form. Detailed instructions on how to
resolve this issue is provided at the end of this questionnaire and is available upon request from Mary
Messer (202-205-3193, [email protected]).
I-1.
OMB statistics.--Please report below the actual number of hours required and the cost to your
firm of completing this questionnaire
Hours
Dollars
The questions in this questionnaire have been reviewed with market participants to ensure that
issues of concern are adequately addressed and that data requests are sufficient, meaningful,
and as limited as possible. Public reporting burden for this questionnaire is estimated to average
20 hours per response, including the time for reviewing instructions, gathering data, and
completing and reviewing the questionnaire.
We welcome comments regarding the accuracy of this burden estimate, suggestions for
reducing the burden, and any suggestions for improving this questionnaire. Please attach such
comments to your response or send to the Office of Investigations, USITC, 500 E St. SW,
Washington, DC 20436.
I-2.
Establishments covered.--Provide the name and address of establishment(s) covered by this
questionnaire. If your firm is publicly traded, please specify the stock exchange and trading
symbol.
“Establishment”-- Each facility of a firm in Canada, China, and/or Mexico involved in the
production or export of fabricated structural steel, including auxiliary facilities operated in
conjunction with (whether or not physically separate from) such facilities. Firms operating more
than one establishment in Canada, China, and/or Mexico should combine the data for all
establishments into a single report.
Business Proprietary
Foreign Producers’ Questionnaire – Fabricated Structural Steel
I-3.
Related producers.--Does your firm or any related firm produce, have the capability to produce,
or have any plans to produce fabricated structural steel in the United States or other countries?
No
I-4.
Yes
Yes
2
3
4
5
If yes, please name the firm(s) below and ensure that they complete the
Commission’s importer questionnaire.
U.S. importers.--Please provide the names, contacts, telephone numbers, and e-mail addresses
of the FIVE largest U.S. importers of your firm’s fabricated structural steel in 2017.
Importer’s name
1
If yes, please name the firm(s) and country(ies) below and, if U.S.
producer(s), ensure that they complete the Commission’s producer
questionnaire.
Related U.S. importers.--Does your firm or any related firm import or have any plans to import
fabricated structural steel into the United States?
No
I-5.
Page 5
Contact person
Email
Telephone
Share of your
firm’s 2017 U.S.
exports (%)
Business Proprietary
Foreign Producers’ Questionnaire – Fabricated Structural Steel
Page 6
PART II.--TRADE AND RELATED INFORMATION
Further information on this part of the questionnaire can be obtained from Mary Messer (202-205-3193,
[email protected]). Supply all data requested on a calendar-year basis.
II-1.
Contact information.--Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in part II.
Name
Title
Email
Telephone
Fax
II-2a.
Changes in operations.--Please indicate whether your firm has experienced any of the following
changes in relation to the production of fabricated structural steel since January 1, 2015.
(check as many as appropriate)
plant openings
plant closings
relocations
expansions
acquisitions
consolidations
prolonged shutdowns or
production curtailments
revised labor agreements
other (e.g., technology)
(If checked, please describe; leave blank if not applicable)
Business Proprietary
Foreign Producers’ Questionnaire – Fabricated Structural Steel
II-2b.
Page 7
Anticipated changes in operations.--Does your firm anticipate any changes in the character of
its operations or organization (as noted above) relating to the production of fabricated
structural steel in the future?
No
Yes
If yes, supply details as to the time, nature, and significance of such
changes and provide underlying assumptions.
Business Proprietary
Foreign Producers’ Questionnaire – Fabricated Structural Steel
II-3a.
Page 8
Production using same machinery.-- Please report your firm’s production of products using the
same equipment, machinery, or employees as used to produce fabricated structural steel, and
the combined production capacity on this shared equipment, machinery, or employees in the
periods indicated.
“Overall production capacity” or “capacity” –The level of production that your
establishment(s) could reasonably have expected to attain during the specified periods for all
products manufactured in that establishment using the same manufacturing equipment.
Assume normal operating conditions (i.e., using equipment and machinery in place and ready to
operate; normal operating levels (hours per week/weeks per year) and time for downtime,
maintenance, repair, and cleanup).
Note.--If your firm does not produce any out-of-scope merchandise on the same machinery and
equipment as scope merchandise, then the "overall production capacity" numbers reported in
this question should be exactly equal to the "average production capacity" numbers reported in
question II-8. If, however, your firm does produce out-of-scope merchandise using the same
machinery and equipment as scope merchandise, then the "average production capacity"
reported in question II-8 should exclude the portion of "overall production capacity" that was
used to produce this out-of-scope merchandise.
“Production” --All production in your establishment(s) in Canada, China, and/or Mexico,
including production consumed internally within your firm.
Quantity (in short tons)
Calendar years
Item
Overall production capacity
2015
2016
January-September
2017
2017
2018
1
Production of:
In-scope fabricated structural steel
(“FSS”)2
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Out-of-scope production.-Excluded FSS used for bridges
and bridge sections3
Other specifically excluded FSS
products4
All other products5
Subtotal, out-of-scope
production
Total production using same
machinery or workers
1
Data reported for capacity (first line) should be greater than data reported for total production (last line).
Data entered for production of fabricated structural steel will populate here once reported in question II-8.
3
See definition of excluded FSS bridges and bridge sections on page 3.
4
Other specifically excluded FSS products are certain (1) fabricated steel concrete reinforcing bar; (2) pre-engineered
metal building systems; (3) steel roof and floor decking systems; and (4) open web steel bar joists and joist girders. See
definitions of these specifically excluded items on page 3.
5
Please identify these products:
.
2
Business Proprietary
Foreign Producers’ Questionnaire – Fabricated Structural Steel
II-3b.
Page 9
Operating parameters.--The production capacity reported in II-3a is based on the following
operating paramaters:
Hours per week
Weeks per year
II-3c.
Capacity calculation.--Please describe the methodology used to calculate overall production
capacity reported in II-3a, and explain any changes in reported capacity.
II-3d.
Production constraints.--Please describe the constraint(s) that set the limit(s) on your firm’s
production capacity.
II-3e.
Product shifting.—
(i).
Is your firm able to switch production (capacity) between fabricated structural steel and
other products using the same equipment and/or labor?
No
(ii).
Yes
If yes—(i.e., have produced other products or are able to produce other
products) Please identify other actual or potential products.
Please describe the factors that affect your firm’s ability to shift production capacity
between products (e.g., time, cost, relative price change, etc.), and the degree to which
these factors enhance or constrain such shifts.
Business Proprietary
Foreign Producers’ Questionnaire – Fabricated Structural Steel
Page 10
II-4.
Share of sales.--What percentage of your firm’s total sales in its most recent fiscal year was
represented by sales of fabricated structural steel?
percent.
II-5.
Firm's estimated share of production in Canada, China, and/or Mexico.--Please estimate the
percentage of total production of fabricated structural steel in the country specified on the
certification page accounted for by your firm’s production in 2017.
percent.
II-6.
Firm's estimated share of country's exports.--Please estimate the percentage of total exports to
the United States of fabricated structural steel from the country specified on the certification
page accounted for by your firm’s exports in 2017.
percent.
II-7.
Third country trade actions.--Is the fabricated structural steel exported by your firm subject to
antidumping/countervailing duty/safeguard findings, remedies, or proceedings?
No
Yes
If yes--List the products(s), countries affected, and the date of such
findings/remedies/proceedings.
Business Proprietary
Foreign Producers’ Questionnaire – Fabricated Structural Steel
II-8.
Page 11
Trade data.--Report your firm’s production capacity, production, shipments, and inventories
related to the production of fabricated structural steel in your establishment(s) in Canada,
China, and/or Mexico during the specified periods. Do not include resales of fabricated
structural steel that your firm did not produce in this question; those data to the degree they
are exported to the United States should only be reported in question II-9.
Do not submit data by manufacturing facility if they are in the same country. If your firm has
multiple manufacturing establishments within one country, you are required to combine data
for those establishments within one foreign producer questionnaire response.
Do not submit data on multiple countries combined. The establishments reported here should
all be located in the country of the firm’s address reported on the certification page.
Multinational companies with production in multiple subject countries should submit separate
foreign producer questionnaire responses for each subject country.
“Average production capacity” or “capacity” –The level of production that your
establishment(s) could reasonably have expected to attain during the specified periods for all
products manufactured in that establishment using the same manufacturing equipment.
Assume normal operating conditions (i.e., using equipment and machinery in place and ready to
operate; normal operating levels (hours per week/weeks per year) and time for downtime,
maintenance, repair, and cleanup; and a typical or representative product mix).
“Production” --All production in your establishment(s) in Canada, China, and/or Mexico,
including production consumed internally within your firm.
“Shipments”--Shipments of products produced in your establishment(s) in Canada, China,
and/or Mexico. Quantities reported should be net of returns.
“Home market commercial shipments”--Shipments, other than internal consumption and
transfers to related firms, within Canada, China, and/or Mexico.
“Home market internal consumption/transfers to related firms”--Shipments made to
related firms in Canada, China, and/or Mexico, including product consumed internally by your
firm.
“Export shipments”--Shipments to destinations outside of the country indicated on page 1
(Canada, China, and/or Mexico), including shipments to related firms.
“Inventories”--Finished goods inventory, not raw materials or work-in-progress.
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records
used in the preparation of the trade data, as Commission staff may contact your firm regarding
questions on the trade data. The Commission may also request that your company submit copies
of the supporting documents/records (such as production and sales schedules, inventory records,
etc.) used to compile these data.
Business Proprietary
Foreign Producers’ Questionnaire – Fabricated Structural Steel
II-8.
Page 12
Trade data.--Continued.
Quantity (in short tons)
Actual experience
Calendar year
Item
Average production capacity
(A)
2015
2016
Projections1
Jan-Sept
2017
2017
Calendar year
2018
2018
2019
2020
2
Beginning-of-period
inventories (B)
Production (C)
Home market shipments:
Internal consumption/
transfers (D)
Commercial shipments (E)
Exports to the United States
(F)
Exports to all other markets3
(G)
Total exports (H)
(should equal F+G)
0
0
0
0
0
0
0
0
Total shipments (I)
(should equal D+E+F+G)
0
0
0
0
0
0
0
0
End-of-period inventories (J)
1
Please explain the basis for your firm’s projections.
.
2
The production capacity reported is based on operating
hours per week,
weeks per
year. Please describe the methodology used to calculate production capacity, and explain any changes
in reported capacity.
.
3
Identify principal other export markets.
.
RECONCILIATION OF SHIPMENTS, PRODUCTION, AND INVENTORY.--Generally, the data reported for the
end-of-period inventories (i.e., line J) should be equal to the beginning-of-period inventories (i.e., line B),
plus production (i.e., line C), less total shipments (i.e., lines D, E, F, and G). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your firm’s
records; and also provide any likely explanations for any differences (e.g., theft, loss, damage, record
systems issues, etc.) if they exist.
Actual experience
Calendar year
Item
2015
2016
2017
Projections
Jan-Sept
2017
2018
Calendar year
2018
2019
2020
B+C–D–E–F–G–J=
should equal zero ("0") or
provide an explanation.1
0
0
0
0
0
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate:
0
Business Proprietary
Foreign Producers’ Questionnaire – Fabricated Structural Steel
II-9.
Page 13
Exports to the United States not produced by your firm.--Report your firm’s exports to the
United States of fabricated structural steel that was produced in Canada, China, and/or Mexico
but not by your firm during the specified periods. Note these data should not be included in
question II-8.
Quantity (in short tons)
Actual experience
Calendar year
Item
2015
2016
Projections
Jan-Sept
2017
2017
2018
Calendar year
2018
2019
2020
Exports of fabricated
structural steel to the
United States not
produced by your firm1
1
List the producer(s).
II-10.
Other explanations.--If your firm would like to further explain a response to a question in Part II
for which a narrative box was not provided, please note the question number and the
explanation in the space provided below. Please also use this space to highlight any issues your
firm had in providing the data in this section, including but not limited to technical issues with
the MS Word questionnaire.
Business Proprietary
Foreign Producers’ Questionnaire – Fabricated Structural Steel
Page 14
Correcting Valid number error messages.--If you are completing a Commission
questionnaire in a country that uses periods (“.”) to delineate multiples of 1000 (e.g., one million would
appear as $1.000.000 instead of as $1,000,000), you may be unable to enter in numbers greater than
999 in numeric form fields. This issues stem from your computer number formatting setting (e.g., not
the MS Word document itself, but the computer from which you are opening up the document). In the
United States commas (,) delineate multiples of 1000 and periods (.) delineate fractions less than one.
Many EU countries use the reverse where multiples of 1000 are delineated with periods (.) and
fractions less than one are delineated with commas (,). The US International Trade Commission’s
questionnaires are set-up in the United States with the U.S. number formatting. When this formatting
interacts with a computer set to EU number formatting, we believe this may cause this issue.
The solution to this data entry issue is to temporarily change your operating system’s number
formatting to be consistent with the U.S. number formatting system while you complete the
questionnaire.
To temporarily change your computer’s number settings to U.S. settings, please do the following (for
Microsoft Windows Operating system):
START
Control Panel
Region and Language (under Clock, Language, and Region category)
Format tab
Change the Format from your existing one (e.g. “Italian (Italy)”) to “English (United States)” (see
screen shots below)
When you do this the number “twelve million dollars and thirty five cents” would change from
$12.000.000,35 (Italy format) to $12,000,000.35 (U.S. format), and then there will be no conflict with
the USITC foreign producer questionnaire form. When you finish reporting the data then you can close
the questionnaire and switch back to Italy settings.
Business Proprietary
Foreign Producers’ Questionnaire – Fabricated Structural Steel
Page 15
HOW TO FILE YOUR QUESTIONNAIRE RESPONSE
This questionnaire is available as a “fillable” form in MS Word format on the
Commission’s website at:
https://www.usitc.gov/investigations/701731/2019/fabricated_structural_steel_canada
_china_and/preliminary.htm.
Please do not attempt to modify the format or permissions of the questionnaire
document. Please submit the completed questionnaire using one of the methods noted
below. If your firm is unable to complete the MS Word questionnaire or cannot use one
of the electronic methods of submission, please contact the Commission for further
instructions.
• Upload via Secure Drop Box.—Upload the MS Word questionnaire along with a scanned copy of the
signed certification page (page 1) through the Commission’s secure upload facility:
Web address: https://dropbox.usitc.gov/oinv/
Pin: FABS
• E-mail.—E-mail your questionnaire to [email protected]; include a scanned copy of the signed
certification page (page 1). Submitters are strongly encouraged to encrypt nonpublic documents that are
electronically transmitted to the Commission to protect your sensitive information from unauthorized
disclosure. The USITC secure drop-box system and the Electronic Document Information System (EDIS)
use Federal Information Processing Standards (FIPS) 140-2 cryptographic algorithms to encrypt data in
transit. Submitting your nonpublic documents by a means that does not use these encryption algorithms
(such as by email) may subject your firm’s nonpublic information to unauthorized disclosure during
transmission. If you choose a non-encrypted method of electronic transmission, the Commission warns
you that the risk of such possible unauthorized disclosure is assumed by you and not by the Commission.
If your firm did not produce or export this product, please fill out page 1, print, sign, and submit a
scanned copy to the Commission.
Parties to this proceeding.—If your firm is a party to this proceeding, you are required to serve a copy of
the completed questionnaire on parties to the proceeding that are subject to administrative protective
order (see 19 CFR § 207.7). A list of such parties may be obtained from the Commission’s Secretary (202205-1803). A certificate of service must accompany the completed questionnaire you submit (see 19 CFR
§ 207.7). Service of the questionnaire must be made in paper form.
| File Type | application/pdf |
| File Title | Microsoft Word - FSS Foreign Producer Q |
| Author | mary.messer |
| File Modified | 2019-02-06 |
| File Created | 2019-02-06 |