19-4-4156 Foreign producers' / exporters' questionnaire

Information collections for import injury investigations (producers, importers, purchasers, and foreign producer questionnaires and institution notices for 5-year reviews)

Foreign producers--Quartz surface products (F)

Quartz surface products from India and Turkey (Inv. nos. 701-TA-624-625 and 731-TA-1450-1451) Final

OMB: 3117-0016

Document [pdf]
Download: pdf | pdf
OMB No. 3117-0016/USITC No. 19-4-4156; Expiration Date: 6/30/2020
(No response is required if currently valid OMB control number is not displayed)

FOREIGN PRODUCERS’/EXPORTERS’ QUESTIONNAIRE
QUARTZ SURFACE PRODUCTS FROM INDIA AND TURKEY
This questionnaire must be received by the Commission by February 7, 2020
See last page for filing instructions.
The information called for in this questionnaire is for use by the United States International Trade Commission in
connection with its antidumping and countervailing duty investigations concerning quartz surface products from
India and Turkey (Inv. Nos. 701-TA-624-625 and 731-TA-1450-1451 (Final)). The information requested in the
questionnaire is requested under the authority of the Tariff Act of 1930, title VII.

Name of firm
Address
Website
Has your firm produced or exported quartz surface products (as defined on next page) at any time since January 1, 2017?

NO

(Sign the certification below and promptly return only this page of the questionnaire to the Commission)

YES

(Complete all parts of the questionnaire, and return the entire questionnaire to the Commission)

Data reported in this questionnaire relate to (Check one):
India

Turkey

Return questionnaire via the Commission Drop Box by clicking on the following link:
https://dropbox.usitc.gov/oinv/. (PIN: QUAR)
CERTIFICATION
I certify that the information herein supplied in response to this questionnaire is complete and correct to the best of my
knowledge and belief and understand that the information submitted is subject to audit and verification by the Commission. By
means of this certification I also grant consent for the Commission, and its employees and contract personnel, to use the
information provided in this questionnaire and throughout this proceeding in any other import-injury proceedings conducted by
the Commission on the same or similar merchandise.
I, the undersigned, acknowledge that information submitted in response to this request for information and throughout this
proceeding or other proceedings may be disclosed to and used: (i) by the Commission, its employees and Offices, and contract
personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits,
reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C.
Appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. I understand that all
contract personnel will sign appropriate nondisclosure agreements.
Name of Authorized Official

Title of Authorized Official

Date

Phone:
Signature

Email address
Fax:

Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Quartz Surface Products (Final)

Page 2

PART I.--GENERAL INFORMATION
Background. --This proceeding was instituted in response to a petition filed on May 8, 2019 by Cambria
Company LLC, Eden Prairie, Minnesota. Antidumping and countervailing duties may be assessed on the
subject imports as a result of these proceedings if the Commission makes an affirmative determination
of injury, threat, or material retardation, and if the U.S. Department of Commerce (“Commerce”) makes
an affirmative determination of subsidization and/or dumping. Questionnaires and other information
pertinent to this proceeding are available at
https://www.usitc.gov/investigations/701731/2018/quartz_surface_products_India and
Turkey/final.htm.
Quartz surface products covered by these investigations consist of slabs and other surfaces created

from a mixture of materials that includes predominately silica (e.g., quartz, quartz powder,
cristobalite, glass powder) as well as a resin binder (e.g., an unsaturated polyester). The
incorporation of other materials, including, but not limited to, pigments, cement, or other
additives does not remove the merchandise from the scope of the investigation. However, the
scope of the investigation only includes products where the silica content is greater than any
other single material, by actual weight. Quartz surface products are typically sold as rectangular
slabs with a total surface area of approximately 45 to 60 square feet and a nominal thickness of
one, two, or three centimeters. However, the scope of the investigation includes surface
products of all other sizes, thicknesses, and shapes. In addition to slabs, the scope of the
investigation includes, but is not limited to, other surfaces such as countertops, backsplashes,
vanity tops, bar tops, work tops, tabletops, flooring, wall facing, shower surrounds, fire place
surrounds, mantels, and tiles. Certain quartz surface products are covered by the investigation
whether polished or unpolished, cut or uncut, fabricated or not fabricated, cured or uncured,
edged or not edged, finished or unfinished, thermoformed or not thermoformed, packaged or
unpackaged, and regardless of the type of surface finish. In addition, quartz surface products
are covered by the investigation whether or not they are imported attached to, or in
conjunction with, non-subject merchandise such as sinks, sink bowls, vanities, cabinets, and
furniture. If quartz surface products are imported attached to, or in conjunction with, such nonsubject merchandise, only the quartz surface product is covered by the scope.
Subject merchandise includes material matching the above description that has been
finished, packaged, or otherwise fabricated in a third country, including by cutting, polishing,
curing, edging, thermoforming, attaching to, or packaging with another product, or any other
finishing, packaging, or fabrication that would not otherwise remove the merchandise from the
scope of the investigation if performed in the country of manufacture of the quartz surface
products. The scope of the investigation does not cover quarried stone surface products, such
as granite, marble, soapstone, or quartzite. Specifically excluded from the scope of the
investigation are crushed glass surface products. Crushed glass surface products must meet
each of the following criteria to qualify for this exclusion: (1) The crushed glass content is
greater than any other single material, by actual weight; (2) there are pieces of crushed glass
visible across the surface of the product; (3) at least some of the individual pieces of crushed
glass that are visible across the surface are larger than 1 centimeter wide as measured at their
widest cross-section (Glass Pieces); and (4) the distance between any single Glass Piece and the
closest separate Glass Piece does not exceed three inches.
The products subject to the scope are currently classified in the Harmonized Tariff

Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Quartz Surface Products (Final)

Page 3

Schedule of the United States (HTSUS) under the following subheading: 6810.99.0010.
Subject merchandise may also enter under subheadings 6810.11.0010, 6810.11.0070,
6810.19.1200, 6810.19.1400, 6810.19.5000, 6810.91.0000, 6810.99.0080, 6815.99.4070,
2506.10.0010, 2506.10.0050, 2506.20.0010, 2506.20.0080, and 7016.90.1050. The HTSUS
subheadings set forth above are provided for convenience and U.S. Customs purposes only. The
written description of the scope is dispositive.
Not fabricated slabs ("Slabs") are defined as quartz surface products that have not been fabricated or
finished in any way (i.e. cutting to a specific size, edging, attaching to another product, or any other
fabrication or finishing, etc.). Slabs require further fabrication to be ready for installation. Synonyms:
Slabs, unfabricated quartz surface products, unfabricated QSP, not fabricated quartz surface products,
not fabricated QSP, unfabricated slabs, quartz slabs.
Fabricated quartz surface products ("Fabs") are defined as quartz products that have been fabricated or
finished to any degree (i.e. cutting to a specific size, edging, attaching to another product, or any other
fabrication or finishing, etc.). Fabs may be ready for installation or may require some additional
fabrication prior to installation. Synonyms: Fabs, fabricated quartz surface products, fabricated QSP,
fabricated products. Note.--Fabricated QSP can contain merchandise that is only partially fabricated
(i.e., requires additional fabrications prior to installation or final sale) as well as fully fabricated and
finished merchandise that is ready for installation.
Reporting of information.--If information is not readily available from your records, provide carefully
prepared estimates. If your firm is completing more than one questionnaire (i.e., a producer, importer,
purchaser and/or foreign producer questionnaire), you need not respond to duplicated questions.
Confidentiality.--The commercial and financial data furnished in response to this questionnaire that
reveal the individual operations of your firm will be treated as confidential by the Commission to the
extent that such data are not otherwise available to the public and will not be disclosed except as may
be required by law (see 19 U.S.C. §1677f). Such confidential information will not be published in a
manner that will reveal the individual operations of your firm; however, general characterizations of
numerical business proprietary information (such as discussion of trends) will be treated as confidential
business information only at the request of the submitter for good cause shown.
Verification.--The information submitted in this questionnaire is subject to audit and verification by the
Commission. To facilitate possible verification of data, please keep all files, worksheets, and supporting
documents used in the preparation of the questionnaire response. Please also retain a copy of the final
document that you submit.
Release of information.--The information provided by your firm in response to this questionnaire, as
well as any other business proprietary information submitted by your firm to the Commission in
connection with this proceeding, may become subject to, and released under, the administrative
protective order provisions of the Tariff Act of 1930 (19 U.S.C. § 1677f) and section 207.7 of the
Commission’s Rules of Practice and Procedure (19 CFR § 207.7). This means that certain lawyers and
other authorized individuals may temporarily be given access to the information for use in connection
with this proceeding or other import-injury proceedings conducted by the Commission on the same or
similar merchandise; those individuals would be subject to severe penalties if the information were
divulged to unauthorized individuals.

Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Quartz Surface Products (Final)

Page 4

Valid number error messages.--If you are completing this form in a country that uses periods (“.”) to
delineate multiples of 1000 (e.g., one million would appear as $1.000.000 rather than $1,000,000), you
may be unable to enter in numbers greater than 999 in numeric form fields. The solution to this data
entry issue is to temporarily change your operating system’s number formatting to be consistent with
the U.S. number formatting system while you complete this form. Detailed instructions on how to
resolve this issue is provided at the end of this questionnaire and is available upon request from Julie
Duffy (202-708-2579), [email protected].

Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Quartz Surface Products (Final)
I-1.

Page 5

OMB statistics.--Please report below the actual number of hours required and the cost to your
firm of completing this questionnaire
Hours

Dollars

The questions in this questionnaire have been reviewed with market participants to ensure that
issues of concern are adequately addressed and that data requests are sufficient, meaningful,
and as limited as possible. Public reporting burden for this questionnaire is estimated to average
20 hours per response, including the time for reviewing instructions, gathering data, and
completing and reviewing the questionnaire.
We welcome comments regarding the accuracy of this burden estimate, suggestions for
reducing the burden, and any suggestions for improving this questionnaire. Please attach such
comments to your response or send to the Office of Investigations, USITC, 500 E St. SW,
Washington, DC 20436.
I-2.

Establishments covered.--Provide the name and address of establishment(s) covered by this
questionnaire. If your firm is publicly traded, please specify the stock exchange and trading
symbol.
“Establishment”--Each facility of a firm in India and Turkey involved in the production or export
of quartz surface products, including auxiliary facilities operated in conjunction with (whether or
not physically separate from) such facilities. Firms operating more than one establishment in
India and Turkey should combine the data for all establishments into a single report.

I-3.

Related producers and fabricators.--Does your firm or any related firm produce or fabricate,
have the capability to produce or fabricate, or have any plans to produce or fabricate quartz
surface products in the United States or other countries?

No

Yes

If yes, please name the firm(s) and country(ies) below and, if U.S.
producer(s), ensure that they complete the Commission’s producer
questionnaire:

Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Quartz Surface Products (Final)
I-4.

Related U.S. importers.--Does your firm or any related firm import or have any plans to import
quartz surface products into the United States?

No

I-5.

Yes

2
3
4
5

If yes, please name the firm(s) below and ensure that they complete the
Commission’s importer questionnaire:

U.S. importers.--Please provide the names, contacts, telephone numbers, and e-mail addresses
of the FIVE largest U.S. importers of your firm’s quartz surface products in 2019.

Importer’s name
1

Page 6

Contact person

Email

Telephone

Share of your
firm’s 2019 U.S.
exports (%)

Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Quartz Surface Products (Final)

Page 7

PART II.--TRADE AND RELATED INFORMATION
Further information on this part of the questionnaire can be obtained from Lawrence Jones (202-2053358, [email protected]). Supply all data requested on a calendar-year basis.
II-1.

Contact information.--Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in part II.
Name
Title
Email
Telephone

II-2a.

Changes in operations.--Please indicate whether your firm has experienced any of the following
changes in relation to the production of quartz surface products since January 1, 2017.
(check as many as appropriate)
plant openings
plant closings
relocations
expansions
acquisitions
consolidations
prolonged shutdowns or
production curtailments
revised labor agreements
other (e.g., technology)

(If checked, please describe; leave blank if not applicable)

Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Quartz Surface Products (Final)
II-2b.

Anticipated changes in operations.--Does your firm anticipate any changes in the character of
its operations or organization (as noted above) relating to the production of quartz surface
products in the future?

No

II-3a.

Yes

If yes, supply details as to the time, nature, and significance of such
changes and provide underlying assumptions.

Product shifting for quartz surface products.-(i)

Is your firm able to switch production (capacity) between the production of quartz surface
products and other products using the same equipment and/or labor?

No

(ii)

II-3b.

Page 8

Yes

If yes (i.e., have produced other products or are able to
produce other products)--Please identify other actual or
potential products:

Please describe the factors that affect your firm’s ability to shift production capacity
between products (e.g., time, cost, relative price change, etc.), and the degree to which
these factors enhance or constrain such shifts.

Production constraints for quartz surface products production.--Please describe the constraint(s)
that set the limit(s) on your firm’s production capacity of quartz surface products.

Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Quartz Surface Products (Final)

Page 9

II-4.

Share of sales.--What percentage of your firm’s total sales in its most recent fiscal year was
represented by sales of quartz surface products?
percent.

II-5.

Firm's estimated share of production in India and Turkey.--Please estimate the percentage of total
production of quartz surface products in the country specified on the certification page accounted
for by your firm’s production in 2019.
percent.

II-6.

Firm's estimated share of country's exports.--Please estimate the percentage of total exports to
the United States of quartz surface products from the country specified on the certification page
accounted for by your firm’s exports in 2019.
percent.

II-7.

Third country trade actions.--Are the quartz surface products exported by your firm subject to
antidumping/countervailing duty/safeguard findings, remedies, or proceedings?

No

Yes

If yes--List the products(s), countries affected, and the date of such
findings/remedies/proceedings.

Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Quartz Surface Products (Final)
II-8.

Page 10

Trade data.--Report your firm’s production capacity, production, shipments, and inventories
related to the production of unfabricated quartz surface products in your establishment(s) in
India and Turkey during the specified periods. Do not include resales of slabs that your firm did
not produce in this question; those data, to the degree they are exported to the United States,
should only be reported in question II-12. Do not report production and internal consumption
of slabs your firm further fabricates in this question.
Do not submit data by manufacturing facility if they are in the same country. If your firm has
multiple manufacturing establishments within one country, you are required to combine data
for those establishments within one foreign producer questionnaire response.
Do not submit data on multiple countries combined. The establishments reported here should
all be located in the country of the firm’s address reported on the certification page.
Multinational companies with production in multiple subject countries should submit separate
foreign producer questionnaire responses for each subject country.
“Average production capacity” or “capacity” -- The level of production that your
establishment(s) could reasonably have expected to attain during the specified periods for all
products manufactured in that establishment using the same manufacturing equipment.
Assume normal operating conditions (i.e., using equipment and machinery in place and ready to
operate; normal operating levels (hours per week/weeks per year) and time for downtime,
maintenance, repair, and cleanup; and a typical or representative product mix).
“Production” -- All production in your establishment(s) in India and Turkey, including production
consumed internally within your firm.
“Shipments” -- Shipments of products produced in your establishment(s) in India or Turkey.
Quantities reported should be net of returns.
“Home market commercial shipments” -- Shipments, other than internal consumption and
transfers to related firms, within India or Turkey.
“Home market internal consumption/transfers to related firms” -- Shipments made to
related firms in India or Turkey, including product consumed internally by your firm.
“Export shipments” -- Shipments to destinations outstide of the country indicacted on page 1
(India and Turkey), including shipments to related firms.
“Inventories” -- Finished goods inventory, not raw materials or work-in-progress.

Note: As requested in Part I of this questionnaire, please keep all supporting documents/records used in
the preparation of the trade data, as Commission staff may contact your firm regarding questions on the
trade data. The Commission may also request that your company submit copies of the supporting
documents/records (such as production and sales schedules, inventory records, etc.) used to compile
these data.

Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Quartz Surface Products (Final)
II-8.

Page 11

Trade data.--Continued.
Quantity (in square feet)

Item

2017

Actual experience

Projections1

Calendar year

Calendar year

2018

2019

2020

2021

2

Average production capacity (A)
Beginning-of-period inventories (B)
Production (C)
Home market shipments:
Internal consumption/ transfers (D)
Commercial shipments (E)
Exports to the United States (F)
Exports to all other markets3 (H)
Total exports (I)
(should equal F+G)

0

0

0

0

0

Total shipments (J)
(should equal D +E+F +G)

0

0

0

0

0

End-of-period inventories (K)
1

Please explain the basis for your firm’s projections.
.
The production capacity reported is based on operating
hours per week,
weeks per year. Please describe the
methodology used to calculate production capacity, and explain any changes in reported capacity.
.
3
Identify principal other export markets.
.
2

RECONCILIATION OF SHIPMENTS, PRODUCTION, AND INVENTORY.--Generally, the data reported for the
end-of-period inventories (i.e., line K) should be equal to the beginning-of-period inventories (i.e., line B),
plus production (i.e., line C), less total shipments (i.e., lines D, E, F, and G). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your firm’s
records; and also provide any likely explanations for any differences (e.g., theft, loss, damage, record
systems issues, etc.) if they exist.

Item

2017

Actual experience

Projections

Calendar year

Calendar year

2018

2019

2020

2021

B + C – D – E – F –G – J = should equal
zero ("0") or provide an explanation.1
0
0
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are nonetheless
accurate:

0

Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Quartz Surface Products (Final)
II-9.

Page 12

Exports to the United States not produced by your firm.--Report your firm’s exports to the
United States of quartz surface products that were produced or fabricated in India and Turkey
but not by your firm (these data should reflect simple resales with no fabrication activity
conducted by your firm) during the specified periods. Note these data should not be included in
questions II-9.
Quantity (in square feet)

Item

2017

Actual experience

Projections

Calendar year

Calendar year

2018

2019

2020

2021

Exports to the United States not
produced or fabricated by your
firm1
1

List the producer(s).

II-10.

Other explanations.--If your firm would like to further explain a response to a question in Part II
that did not provide a narrative box, please note the question number and the explanation in
the space provided below. Please also use this space to highlight any issues your firm had in
providing the data in this section, including but not limited to technical issues with the MS Word
questionnaire.

.

Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Quartz Surface Products (Final)

Page 13

Correcting Valid number error messages.--If you are completing a Commission

questionnaire in a country that uses periods (“.”) to delineate multiples of 1000 (e.g., one million would
appear as $1.000.000 instead of as $1,000,000), you may be unable to enter in numbers greater than
999 in numeric form fields. This issues stem from your computer number formatting setting (e.g., not
the MS Word document itself, but the computer from which you are opening up the document). In the
United States commas (,) delineate multiples of 1000 and periods (.) delineate fractions less than one.
Many EU countries use the reverse where multiples of 1000 are delineated with periods (.) and
fractions less than one are delineated with commas (,). The US International Trade Commission’s
questionnaires are set-up in the United States with the U.S. number formatting. When this formatting
interacts with a computer set to EU number formatting, we believe this may cause this issue.
The solution to this data entry issue is to temporarily change your operating system’s number
formatting to be consistent with the U.S. number formatting system while you complete the
questionnaire.
To temporarily change your computer’s number settings to U.S. settings, please do the following (for
Microsoft Windows Operating system):






START
Control Panel
Region and Language (under Clock, Language, and Region category)
Format tab
Change the Format from your existing one (e.g. “Italian (Italy)”) to “English (United States)” (see
screen shots below)

When you do this the number “twelve million dollars and thirty five cents” would change from
$12.000.000,35 (Italy format) to $12,000,000.35 (U.S. format), and then there will be no conflict with
the USITC foreign producer questionnaire form. When you finish reporting the data then you can close
the questionnaire and switch back to Italy settings.

Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Quartz Surface Products (Final)

Page 14

HOW TO FILE YOUR QUESTIONNAIRE RESPONSE
This questionnaire is available as a “fillable” form in MS Word format on the
Commission’s website at:
https://www.usitc.gov/investigations/701731/2018/quartz_surface_products_India and
Turkey/final.htm.
Please do not attempt to modify the format or permissions of the questionnaire
document. Please submit the completed questionnaire using one of the methods noted
below. If your firm is unable to complete the MS Word questionnaire or cannot use one
of the electronic methods of submission, please contact the Commission for further
instructions.
• Upload via Secure Drop Box.--Upload the MS Word questionnaire along with a scanned copy of the
signed certification page (page 1) through the Commission’s secure upload facility:
Web address: https://dropbox.usitc.gov/oinv/

Pin: QUAR

• E-mail.--E-mail your questionnaire to [email protected]; include a scanned copy of the signed
certification page (page 1). Submitters are strongly encouraged to encrypt nonpublic documents that are
electronically transmitted to the Commission to protect your sensitive information from unauthorized
disclosure. The USITC secure drop-box system and the Electronic Document Information System (EDIS)
use Federal Information Processing Standards (FIPS) 140-2 cryptographic algorithms to encrypt data in
transit. Submitting your nonpublic documents by a means that does not use these encryption algorithms
(such as by email) may subject your firm’s nonpublic information to unauthorized disclosure during
transmission. If you choose a non-encrypted method of electronic transmission, the Commission warns
you that the risk of such possible unauthorized disclosure is assumed by you and not by the Commission.
If your firm did not produce or export this product, please fill out page 1, print, sign, and submit a
scanned copy to the Commission.
Parties to this proceeding.--If your firm is a party to this proceeding, you are required to serve a copy of
the completed questionnaire on parties to the proceeding that are subject to administrative protective
order (see 19 CFR § 207.7). A list of such parties may be obtained from the Commission’s Secretary (202205-1803). A certificate of service must accompany the completed questionnaire you submit (see 19 CFR
§ 207.7). Service of the questionnaire must be made in paper form.


File Typeapplication/pdf
File TitleMicrosoft Word - Foreign producers--Quartz surface products (F)
Authorlawrence.jones
File Modified2019-12-23
File Created2019-12-23

© 2024 OMB.report | Privacy Policy