Download:
pdf |
pdfOMB No. 3117‐0016/USITC No. 20‐2‐4210; Expiration Date: 6/30/2020
(No response is required if currently valid OMB control number is not displayed)
U.S. IMPORTERS’ QUESTIONNAIRE
COMMON ALLOY ALUMINUM SHEET FROM BAHRAIN, BRAZIL, CROATIA, EGYPT,
GERMANY, GREECE, INDIA, INDONESIA, ITALY, KOREA, OMAN, ROMANIA,
SERBIA, SLOVENIA, SOUTH AFRICA, SPAIN, TAIWAN, AND TURKEY
This questionnaire must be received by the Commission by March 23, 2020
See last page for filing instructions.
The information called for in this questionnaire is for use by the United States International Trade Commission in
connection with its countervailing duty and antidumping investigations concerning common alloy aluminum sheet from
Bahrain, Brazil, Croatia, Egypt, Germany, Greece, India, Indonesia, Italy, Korea, Oman, Romania, Serbia, Slovenia, South
Africa, Spain, Taiwan, and Turkey (Inv. Nos. 701‐TA‐639‐642 and 731‐TA‐1475‐1492 (Preliminary)). The information
requested in the questionnaire is requested under the authority of the Tariff Act of 1930, title VII. This report is
mandatory and failure to reply as directed can result in a subpoena or other order to compel the submission of records
or information in your firm’s possession (19 U.S.C. § 1333(a)).
Name of firm
Address
City
State
Zip Code
Website
Has your firm imported common alloy aluminum sheet (as defined on next page) from any country at any time
since January 1, 2017?
NO
(Sign the certification below and promptly return only this page of the questionnaire to the Commission)
YES
(Complete all parts of the questionnaire, and return the entire questionnaire to the Commission)
Return questionnaire via the U.S. International Trade Commission Drop Box by clicking on the
following link: https://dropbox.usitc.gov/oinv/. (PIN: SHEET)
CERTIFICATION
I certify that the information herein supplied in response to this questionnaire is complete and correct to the best of my
knowledge and belief and understand that the information submitted is subject to audit and verification by the Commission. By
means of this certification I also grant consent for the Commission, and its employees and contract personnel, to use the
information provided in this questionnaire and throughout this proceeding in any other import‐injury proceedings conducted by
the Commission on the same or similar merchandise.
I, the undersigned, acknowledge that information submitted in response to this request for information and throughout this
proceeding or other proceedings may be disclosed to and used: (i) by the Commission, its employees and Offices, and contract
personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits,
reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C.
Appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. I understand that all
contract personnel will sign appropriate nondisclosure agreements.
Name of Authorized Official Title of Authorized Official
Date
Signature
Phone
Email address
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 2
PART I.—GENERAL INFORMATION
Background.‐‐This proceeding was instituted in response to a petition filed on March 9, 2020, by The
Aluminum Association Common Alloy Aluminum Sheet Working Group and its Individual Members,
Aleris Rolled Products, Inc., Arconic, Inc., Constellium Rolled Products Ravenswood, LLC, JW Aluminum
Company, Novelis Corporation, and Texarkana Aluminum, Inc. Countervailing and antidumping duties
may be assessed on the subject imports as a result of these proceedings if the Commission makes an
affirmative determination of injury, threat, or material retardation, and if the U.S. Department of
Commerce (“Commerce”) makes an affirmative determination of subsidization and dumping.
Questionnaires and other information pertinent to this proceeding are available at
https://www.usitc.gov/investigations/701731/2020/common_alloy_aluminum_sheet_bahrain_brazil_cr
oatia/preliminary.htm
Common alloy aluminum sheet (“CAAS”).‐‐ The merchandise covered by these investigations is
common alloy aluminum sheet (“CAAS”), which is a flat‐rolled aluminum product having a thickness of
6.3 mm or less, but greater than 0.2 mm, in coils or cut‐to‐length, regardless of width. Common alloy
sheet within the scope of this order includes both not clad aluminum sheet, as well as multi‐alloy, clad
aluminum sheet. With respect to not clad aluminum sheet, common alloy sheet is manufactured from a
1XXX‐, 3XXX‐, or 5XXX‐series alloy as designated by the Aluminum Association. With respect to multi
alloy, clad aluminum sheet, common alloy sheet is produced from a 3XXX‐series core, to which cladding
layers are applied to either one or both sides of the core.
Common alloy sheet may be made to ASTM specification B209‐14, but can also be made to other
specifications. Regardless of specification, however, all common alloy sheet meeting the scope
description is included in the scope. Subject merchandise includes common alloy sheet that has been
further processed in a third country, including but not limited to annealing, tempering, painting,
varnishing, trimming, cutting, punching, and/or slitting, or any other processing that would not
otherwise remove the merchandise from the scope of the order if performed in the country of
manufacture of the common alloy sheet.
Excluded from the scope of this order is aluminum can stock, which is suitable for use in the
manufacture of aluminum beverage cans, lids of such cans, or tabs used to open such cans. Aluminum
can stock is produced to gauges that range from 0.200 mm to 0.292 mm, and has an H‐19, H‐41, H‐48, or
H‐391 temper. In addition, aluminum can stock has a lubricant applied to the flat surfaces of the can
stock to facilitate its movement through machines used in the manufacture of beverage cans. Aluminum
can stock is properly classified under Harmonized Tariff Schedule of the United States (HTSUS)
subheadings 7606.12.3045 and 7606.12.3055.
Where the nominal and actual measurements vary, a product is within the scope if application of either
the nominal or actual measurement would place it within the scope based on the definitions set for the
above.
Common alloy sheet is currently classifiable under HTSUS subheadings 7606.11.3060, 7606.11.6000,
7606.12.3096, 7606.12.6000, 7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095. Further,
merchandise that falls within the scope of this order may also be entered into the United States under
HTSUS subheadings 7606.11.3030, 7606.12.3015, 7606.12.3025, 7606.12.3035, 7606.12.3091,
7606.91.3055, 7606.91.6055, 7606.92.3025, 7606.92.6055, 7607.11.9090. Although the HTSUS
subheadings are provided for convenience and customs purposes, the written description of the scope
of this order is dispositive.
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 3
Aluminum can stock.‐‐Aluminum can stock is aluminum sheet or foil suitable for use in the manufacture
of aluminum beverage cans bodies (“body stock”), lids of such cans, or tabs (“lid stock”) used to open
such cans. Aluminum can stock, for the purposes of data gathered in this questionnaire, is limited to
gauges that range from 0.200 mm to 0.292 mm (i.e., thicknesses otherwise matching the in‐scope
thicknesses for CAAS). Most aluminum can stock is produced with an H‐19, H‐41, H‐48, or H‐391
temper. In addition, aluminum can stock may have a lubricant applied to its flat surfaces to facilitate its
movement through machines used in the manufacture of beverage cans. Aluminum can stock is properly
classified under HTSUS statistical reporting numbers 7606.12.3045 (body stock) and 7606.12.3055 (lid
stock).
Aluminum foil.‐‐Aluminum foil is defined as aluminum with a thickness of 0.2 mm or less.
Aluminum plate.‐‐Aluminum plate is defined as aluminum with a thickness of greater than 6.3 mm.
Importer.‐‐Any person or firm engaged, either directly or through a parent company or subsidiary, in
importing common alloy aluminum sheet (as defined above) into the United States from a foreign
manufacturer or through its selling agent.
Reporting of information.‐‐If information is not readily available from your records, provide carefully
prepared estimates. If your firm is completing more than one questionnaire (i.e., a producer, importer,
and/or purchaser questionnaire), you need not respond to duplicated questions.
Confidentiality.‐‐The commercial and financial data furnished in response to this questionnaire that
reveal the individual operations of your firm will be treated as confidential by the Commission to the
extent that such data are not otherwise available to the public and will not be disclosed except as may
be required by law (see 19 U.S.C. § 1677f). Such confidential information will not be published in a
manner that will reveal the individual operations of your firm; however, general characterizations of
numerical business proprietary information (such as discussion of trends) will be treated as confidential
business information only at the request of the submitter for good cause shown.
Verification.‐‐The information submitted in this questionnaire is subject to audit and verification by the
Commission. To facilitate possible verification of data, please keep all files, worksheets, and supporting
documents used in the preparation of the questionnaire response. Please also retain a copy of the final
document that you submit.
Release of information.‐‐The information provided by your firm in response to this questionnaire, as
well as any other business proprietary information submitted by your firm to the Commission in
connection with this proceeding, may become subject to, and released under, the administrative
protective order provisions of the Tariff Act of 1930 (19 U.S.C. § 1677f) and section 207.7 of the
Commission’s Rules of Practice and Procedure (19 CFR § 207.7). This means that certain lawyers and
other authorized individuals may temporarily be given access to the information for use in connection
with this proceeding or other import‐injury proceedings conducted by the Commission on the same or
similar merchandise; those individuals would be subject to severe penalties if the information were
divulged to unauthorized individuals.
Valid number error messages.‐‐If you are completing this form in a country that uses periods (“.”) to
delineate multiples of 1000 (e.g., one million would appear as $1.000.000 rather than $1,000,000), you
may be unable to enter in numbers greater than 999 in numeric form fields. The solution to this data
entry issue is to temporarily change your operating system’s number formatting to be consistent with
the U.S. number formatting system while you complete this form. Detailed instructions on how to
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 4
resolve this issue is provided at the end of this questionnaire and is available upon request from Stamen
Borisson (202‐205‐3125, [email protected]).
D‐GRIDS tool.‐‐The Commission has a tool that firms can use to move data from their own MS Excel
compilation files into self‐contained data tables within this MS Word questionnaire, thereby reducing
the amount of cell‐by‐cell data entry that would be required to complete this form. This tool is a macro‐
enabled MS Excel file available for download from the Commission's generic questionnaires webpage
(https://www.usitc.gov/trade_remedy/question.htm) called the "D‐GRIDs tool." Use of this tool to help
your firm complete this questionnaire is optional. Firms opting to use the D‐GRIDs tool to populate their
data into this questionnaire will need the D‐GRIDs specification sheet PDF file specific to this proceeding
(available on the case page which is linked under the "Background" above) which includes the necessary
references relating to this questionnaire, as well as the macro‐enable MS Excel D‐GRIDs tool itself from
the generic questionnaires page. More detailed instructions on how to use the D‐GRIDs tool are
available within the D‐GRIDs tool itself.
I‐1.
OMB statistics.‐‐Please report below the actual number of hours required and the cost to your
firm of completing this questionnaire.
Hours
Dollars
I‐2a.
The questions in this questionnaire have been reviewed with market participants to ensure that
issues of concern are adequately addressed and that data requests are sufficient, meaningful,
and as limited as possible. Public reporting burden for this questionnaire is estimated to average
40 hours per response, including the time for reviewing instructions, gathering data, and
completing and reviewing the questionnaire.
We welcome comments regarding the accuracy of this burden estimate, suggestions for
reducing the burden, and any suggestions for improving this questionnaire. Please attach such
comments to your response or send to the Office of Investigations, USITC, 500 E St. SW,
Washington, DC 20436.
Establishments covered.‐‐Provide the name and address of establishment(s) covered by this
questionnaire.
“Establishment”‐‐Each facility of a firm involved in the importation of common alloy aluminum
sheet, including auxiliary facilities operated in conjunction with (whether or not physically
separate from) such facilities.
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
I‐2b.
I‐2c.
Page 5
Stock symbol information.‐‐ If your firm or parent firm is publicly traded, please specify the
stock exchange and trading symbol: .
External counsel.‐‐ If your firm or parent firm is represented by external counsel in relation to
this proceeding, please specify the name of the law firm and the lead attorney(s).
I‐3.
I‐4.
Law firm:
Lead attorney(s):
Ownership.‐‐Is your firm owned, in whole or in part, by any other firm?
No
Yes‐‐List the following information, relating to the ultimate parent/owner.
Extent of
ownership
Firm name
Country
(percent)
Related importers/exporters.‐‐Does your firm have any related firms, either domestic or
foreign, that are engaged in importing common alloy aluminum sheet from Bahrain, Brazil,
Croatia, Egypt, Germany, Greece, India, Indonesia, Italy, Korea, Oman, Romania, Serbia,
Slovenia, South Africa, Spain, Taiwan, or Turkey into the United States or that are engaged in
exporting common alloy aluminum sheet from the above countries to the United States?
No
Yes‐‐List the following information.
Firm name
Country
Affiliation
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
I‐5.
I‐6.
Page 6
Related producers.‐‐Does your firm have any related firms, either domestic or foreign, that are
engaged in the production of common alloy aluminum sheet?
No
Yes‐‐List the following information.
Firm name
Country
Affiliation
Importing operations.‐‐Please indicate the nature of your firm’s importing operations on
common alloy aluminum sheet. More than one answer may be applicable.
Importer of record
I‐7.
Takes title to the
imported product(s)
Consignee of the
imported products(s)
Customs broker or
freight forwarder
Consignee.‐‐If your firm is an importer of record of common alloy aluminum sheet but is not the
consignee, please list the consignees below (firm name, address, telephone number, and
individual to contact).
Firm name
Address
Contact person
and phone
number
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
I‐8.
Page 7
FTZ, TIB, or bonded warehouses.‐‐Please indicate whether your firm enters common alloy
aluminum sheet into, or withdraws such merchandise from, foreign trade zones or bonded
warehouses. Also indicate whether your firm imports common alloy aluminum sheet under the
TIB (temporary importation under bond) program.
“Foreign trade zone” is a designated location in the United States where firms utilize special
procedures that allow delayed or reduced customs duty payments on foreign merchandise, as
well as other savings. A foreign trade zone must be designated as such pursuant to the rules
and procedures set forth in the Foreign‐Trade Zones Act.
“Bonded warehouse” is a secured facility supervised by U.S. customs, where dutiable landed
imports are stored pending their re‐export, or release after payment of import duties, taxes, and
other charges. A bonded warehouse must be designed as such pursuant to the rules and
procedures set forth in 19 U.S.C. § 1555.
“Temporary Importation under Bond (“TIB”) program” is a procedure whereby imported
merchandise may be entered under certain conditions for a limited time into the United States
free of duty. Under the program, an importer posts a bond for twice the amount of duty, taxes,
etc. that would otherwise be owed on the importation and agrees to export or destroy the
merchandise within a specified time or pay liquidated damages. This program is restricted to
certain categories of merchandise listed in subheadings 9813.00.05 through 9813.00.75 of the
Harmonized Tariff Schedule of the United States (HTS).
Item
I‐9.
No
Yes
Foreign trade zones
Bonded warehouses
Temporary importation under bond
Other trade actions.‐‐To your knowledge, have the products subject to this proceeding been the
subject of any other import relief proceedings in the United States or in any other countries?
No
Yes
If yes, Yes–Please specify.
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 8
PART II.‐‐TRADE AND RELATED INFORMATION
Further information on this part of the questionnaire can be obtained from Stamen Borisson (202‐205‐
3125, [email protected]). Supply all data requested as requested on a calendar‐year basis.
II‐1. Contact information.‐‐Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in part II.
Name
Title
Email
Telephone
II‐2. Changes in operations.‐‐Please indicate whether your firm has experienced any of the following
changes in relation to the importation of common alloy aluminum sheet since January 1, 2017.
(check as many as appropriate)
(If checked, please describe; leave blank if not applicable)
Office/warehouse openings
Office/warehouse closings
Relocations
Expansions
Acquisitions
Consolidations
Prolonged shutdowns or
importation curtailments
Revised labor agreements
Other (e.g., technology)
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 9
II‐3a. Arranged imports.‐‐Has your firm imported or arranged for the importation of common alloy
aluminum sheet for delivery after December 31, 2019?
“Arranged imports” are imports for which your firm has placed an order with a foreign supplier
for subject merchandise, but delivery of those imports is not scheduled to occur until after the
date listed above.
No
Yes
If yes, fill out the table below.
Period
Source
Jan‐Mar 2020
Apr‐Jun 2020
Jul‐Sept 2020
Oct‐Dec 2020
Quantity (in short tons)
Bahrain
Brazil
Croatia
Egypt
Germany
Greece
India
Indonesia
Italy
Korea
Oman
Romania
Serbia
Slovenia
South Africa
Spain
Taiwan
Turkey
All other sources
II‐3b. Imports in the 12 month period preceding the petition.‐‐Has your firm imported common alloy
aluminum sheet from any source between March 1, 2019 and February 29, 2020? (i.e., the last
ten months in 2019 and first two months in 2020 combined)
No
Yes
If yes, report the quantity of such import below by source.
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 10
Quantity (in short tons)
Source
Bahrain
Brazil
Croatia
Egypt
Germany
Greece
India
Indonesia
Italy
Korea
Oman
Romania
Serbia
Slovenia
South Africa
Spain
Taiwan
Turkey
All other sources
II‐4.
March 1, 2019 through February 29,
2020
Reasons for importing if producer.‐‐If your firm also produces common alloy aluminum sheet in
the United States, please indicate the reasons for importing this product. If your firm’s reasons
differ by source, please elaborate.
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 11
Definitions
“Imports” –Those products identified for Customs purposes as imports for consumption for
which your firm was the importer of record (i.e., was responsible for paying any import duty.
“Import quantities” –Quantities reported should be net of returns.
“Import values”—Values reported should be landed, duty‐paid values at the U.S. port of entry,
including ocean freight and insurance costs, brokerage charges, and import duties (i.e., all
charges except inland freight in the United States).
“Commercial U.S. shipments”— Shipments made within the United States as a result of an
arm’s length commercial transaction in the ordinary course of business. Report net values (i.e.,
gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of
returned goods) in U.S. dollars, f.o.b. your point of shipment.
“Internal consumption” –Product consumed internally by your firm. Such transactions are
valued at fair market value.
“Transfers to related firms” –Shipments made to related firms. Such transactions are valued at
fair market value.
“Related firm” –A firm that your firm solely or jointly owned, managed, or otherwise controlled;
a firm that solely or jointly owned, managed, or otherwise controlled your firm; and/or a firm
that was solely or jointly owned, managed, or otherwise controlled by a firm that also solely or
jointly owned, managed, or otherwise controlled your firm.
“Export shipments”— Shipments to destinations outside the United States, including shipments
to related firms.
“Inventories” ‐‐Finished goods inventory, not raw materials or work in progress.
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records
used in the preparation of the trade data, as Commission staff may contact your firm regarding
questions on the trade data. The Commission may also request that your company submit copies
of the supporting documents/records (such as production and sales schedules, inventory records,
etc.) used to compile these data.
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 12
II‐5a. U.S. imports from Bahrain.–Report your firm’s imports and your firm’s shipments and
inventories of common alloy aluminum sheet imported from Bahrain by your firm during the
specified periods.
Bahrain
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2017
2018
2019
Beginning‐of‐period inventories
(quantity) (A)
Imports:1
Entering under Primary HTS
statistical reporting numbers:2
Quantity (B)
Entering under other HTS
statistical reporting numbers:3
Quantity (D)
Value (E)
Value (C)
U.S. shipments:
Commercial shipments:
Quantity (F)
Value (G)
Internal consumption:
Quantity (H)
4
4
Value (I)
Transfers to related firms:
Quantity (J)
4
Value (K)
Export shipments:
Quantity (L)
5
Value (M)
End‐of‐period inventories
(quantity) (N)
1
4
Please identify the foreign producers, if known: .
Primary HTS statistical report numbers include 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000,
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095.
3
Please identify the specific other HTS statistical reporting numbers which your firm classifies its imports of
CAAS: .
4
Internal consumption and transfers to related firms must be valued at fair market value. If your firm uses a
different basis for valuing these transactions in your records, please specify that basis (e.g., cost, cost plus, etc.):
. However, the data provided above in this table should be based on fair market value.
5
Identify your firm’s principal export markets: .
2
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 13
II‐5a. U.S. imports from Bahrain.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.‐‐Generally, the data reported for the
end‐of‐period inventories (i.e., lines N) should be equal to the beginning‐of‐period inventories (i.e., line
A), plus imports (i.e., lines B and D), less total shipments (i.e., lines F, H, J and L). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your
firm’s records; and also provide any likely explanations for any differences (e.g., theft, loss, damage,
record systems issues, etc.) if they exist.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation
2017
A + B + D ‐ F ‐ H ‐ J ‐ L ‐ N = should equal
zero ("0") or provide an explanation.1
2018
0
2019
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate: .
II‐5b. Channels of distribution: Bahrain.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports
from Bahrain by channel of distribution during the specified periods.
Bahrain
Calendar Years
Item
2017
2018
2019
Quantity (in short tons)
Channels of distribution:
U.S. shipments:
To distributors (O)
To converters (P)
To end users (Q)
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities reported for channels of distribution
(i.e., lines O, P and Q) in each time period equal the quantity reported for U.S. shipments (i.e., line F, H, J)
in each time period. If the calculated fields below return values other than zero (i.e., “0”), the data
reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation item
O + P + Q – F – H – J= zero
("0"), if not revise.
2017
2018
0
2019
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
II‐5c.
Page 14
U.S. shipments by product type: Bahrain.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports of
CAAS from Bahrain.
Bahrain
Quantity (in short tons), value (in $1,000)
Item
Calendar years
2017
U.S. shipments.‐‐
Non‐clad 1XXX series:
Quantity (R)
2018
2019
Value (W)
Clad or multi‐alloy:
Quantity (X)
Value (Y)
All other in‐scope
products:1
Quantity (Z)
Value (AA)
Value (S)
Non‐clad 3XXX series:
Quantity (T)
Value (U)
Non‐clad 5XXX series:
Quantity (V)
1
Describe these products:
RECONCILIATION OF U.S. SHIPMENTS.‐‐Please ensure that the quantities and values reported for US
shipments by product type (i.e., lines R through AA) equal the quantity and value reported for U.S.
shipments (i.e., lines F through K) in part "a" of this question. If the calculated fields below return values
other than zero (i.e., “0”), the data reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Year
Reconciliation
2017
2018
2019
Quantity: R + T + V + X + Z – F – H – J = zero
("0"), if not revise.
0
0
0
Value: S + U + W + Y + AA– G – I – K = zero
("0"), if not revise.
0
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 15
II‐6a. U.S. imports from Brazil.–Report your firm’s imports and your firm’s shipments and inventories
of common alloy aluminum sheet imported from Brazil by your firm during the specified
periods.
Brazil
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2017
2018
2019
Beginning‐of‐period inventories
(quantity) (A)
Imports:1
Entering under Primary HTS
statistical reporting numbers:2
Quantity (B)
Entering under other HTS
statistical reporting numbers:3
Quantity (D)
Value (E)
Value (C)
U.S. shipments:
Commercial shipments:
Quantity (F)
Value (G)
Internal consumption:
Quantity (H)
4
4
Value (I)
Transfers to related firms:
Quantity (J)
4
Value (K)
Export shipments:
Quantity (L)
5
Value (M)
End‐of‐period inventories
(quantity) (N)
1
4
Please identify the foreign producers, if known: .
Primary HTS statistical report numbers include 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000,
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095.
3
Please identify the specific other HTS statistical reporting numbers which your firm classifies its imports of
CAAS: .
4
Internal consumption and transfers to related firms must be valued at fair market value. If your firm uses a
different basis for valuing these transactions in your records, please specify that basis (e.g., cost, cost plus, etc.):
. However, the data provided above in this table should be based on fair market value.
5
Identify your firm’s principal export markets: .
2
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 16
II‐6a. U.S. imports from Brazil.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.‐‐Generally, the data reported for the
end‐of‐period inventories (i.e., lines N) should be equal to the beginning‐of‐period inventories (i.e., line
A), plus imports (i.e., lines B and D), less total shipments (i.e., lines F, H, J and L). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your
firm’s records; and also provide any likely explanations for any differences (e.g., theft, loss, damage,
record systems issues, etc.) if they exist.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation
2017
2018
A + B + D ‐ F ‐ H ‐ J ‐ L ‐ N = should equal
zero ("0") or provide an explanation.1
0
2019
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate: .
II‐6b. Channels of distribution: Brazil.‐‐Report your firm’s U.S. shipments (i.e. inclusive of commercial
U.S. shipments, internal consumption, and transfers to related firms) of imports from Brazil by
channel of distribution during the specified periods.
Brazil
Calendar Years
Item
2017
2018
2019
Quantity (in short tons)
Channels of distribution:
U.S. shipments:
To distributors (O)
To converters (P)
To end users (Q)
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities reported for channels of distribution
(i.e., lines O, P and Q) in each time period equal the quantity reported for U.S. shipments (i.e., line F, H, J)
in each time period. If the calculated fields below return values other than zero (i.e., “0”), the data
reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation item
O + P + Q – F – H – J= zero
("0"), if not revise.
2017
2018
0
2019
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
II‐6c.
Page 17
U.S. shipments by product type: Brazil.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports of
CAAS from Brazil.
Brazil
Quantity (in short tons), value (in $1,000)
Item
Calendar years
2017
U.S. shipments.‐‐
Non‐clad 1XXX series:
Quantity (R)
2018
2019
Value (W)
Clad or multi‐alloy:
Quantity (X)
Value (Y)
All other in‐scope
products:1
Quantity (Z)
Value (AA)
Value (S)
Non‐clad 3XXX series:
Quantity (T)
Value (U)
Non‐clad 5XXX series:
Quantity (V)
1
Describe these products:
RECONCILIATION OF U.S. SHIPMENTS.‐‐Please ensure that the quantities and values reported for US
shipments by product type (i.e., lines R through AA) equal the quantity and value reported for U.S.
shipments (i.e., lines F through K) in part "a" of this question. If the calculated fields below return values
other than zero (i.e., “0”), the data reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Year
Reconciliation
2017
2018
2019
Quantity: R + T + V + X + Z – F – H – J = zero
("0"), if not revise.
0
0
0
Value: S + U + W + Y + AA– G – I – K = zero
("0"), if not revise.
0
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 18
II‐7a. U.S. imports from Croatia.–Report your firm’s imports and your firm’s shipments and
inventories of common alloy aluminum sheet imported from Croatia by your firm during the
specified periods.
Croatia
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2017
Beginning‐of‐period inventories
(quantity) (A)
2018
2019
Entering under other HTS
statistical reporting numbers:3
Quantity (D)
Value (E)
1
Imports:
Entering under Primary HTS
statistical reporting numbers:2
Quantity (B)
Value (C)
U.S. shipments:
Commercial shipments:
Quantity (F)
Value (G)
Internal consumption:
Quantity (H)
4
4
Value (I)
Transfers to related firms:4
Quantity (J)
4
Value (K)
Export shipments:
Quantity (L)
5
Value (M)
End‐of‐period inventories
(quantity) (N)
1
Please identify the foreign producers, if known: .
Primary HTS statistical report numbers include 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000,
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095.
3
Please identify the specific other HTS statistical reporting numbers which your firm classifies its imports of
CAAS: .
4
Internal consumption and transfers to related firms must be valued at fair market value. If your firm uses a
different basis for valuing these transactions in your records, please specify that basis (e.g., cost, cost plus, etc.):
. However, the data provided above in this table should be based on fair market value.
5
Identify your firm’s principal export markets: .
2
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 19
II‐7a. U.S. imports from Croatia.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.‐‐Generally, the data reported for the
end‐of‐period inventories (i.e., lines N) should be equal to the beginning‐of‐period inventories (i.e., line
A), plus imports (i.e., lines B and D), less total shipments (i.e., lines F, H, J and L). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your
firm’s records; and also provide any likely explanations for any differences (e.g., theft, loss, damage,
record systems issues, etc.) if they exist.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation
2017
A + B + D ‐ F ‐ H ‐ J ‐ L ‐ N = should equal
zero ("0") or provide an explanation.1
2018
0
2019
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate: .
II‐7b. Channels of distribution: Croatia.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports
from Croatia by channel of distribution during the specified periods.
Croatia
Calendar Years
Item
2017
2018
2019
Quantity (in short tons)
Channels of distribution:
U.S. shipments:
To distributors (O)
To converters (P)
To end users (Q)
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities reported for channels of distribution
(i.e., lines O, P and Q) in each time period equal the quantity reported for U.S. shipments (i.e., line F, H, J)
in each time period. If the calculated fields below return values other than zero (i.e., “0”), the data
reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation item
O + P + Q – F – H – J= zero
("0"), if not revise.
2017
2018
0
2019
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
II‐7c.
Page 20
U.S. shipments by product type: Croatia.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports of
CAAS from Croatia.
Croatia
Quantity (in short tons), value (in $1,000)
Item
Calendar years
2017
U.S. shipments.‐‐
Non‐clad 1XXX series:
Quantity (R)
2018
2019
Value (W)
Clad or multi‐alloy:
Quantity (X)
Value (Y)
All other in‐scope
products:1
Quantity (Z)
Value (AA)
Value (S)
Non‐clad 3XXX series:
Quantity (T)
Value (U)
Non‐clad 5XXX series:
Quantity (V)
1
Describe these products:
RECONCILIATION OF U.S. SHIPMENTS.‐‐Please ensure that the quantities and values reported for US
shipments by product type (i.e., lines R through AA) equal the quantity and value reported for U.S.
shipments (i.e., lines F through K) in part "a" of this question. If the calculated fields below return values
other than zero (i.e., “0”), the data reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Year
Reconciliation
Quantity: R + T + V + X + Z – F – H – J = zero
("0"), if not revise.
Value: S + U + W + Y + AA– G – I – K = zero
("0"), if not revise.
2017
2018
2019
0
0
0
0
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 21
II‐8a. U.S. imports from Egypt.–Report your firm’s imports and your firm’s shipments and inventories
of common alloy aluminum sheet imported from Egypt by your firm during the specified
periods.
Egypt
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2017
2018
2019
Beginning‐of‐period inventories
(quantity) (A)
Imports:1
Entering under Primary HTS
statistical reporting numbers:2
Quantity (B)
Entering under other HTS
statistical reporting numbers:3
Quantity (D)
Value (E)
Value (C)
U.S. shipments:
Commercial shipments:
Quantity (F)
Value (G)
Internal consumption:
Quantity (H)
4
4
Value (I)
Transfers to related firms:
Quantity (J)
4
Value (K)
Export shipments:
Quantity (L)
5
Value (M)
End‐of‐period inventories
(quantity) (N)
1
4
Please identify the foreign producers, if known: .
Primary HTS statistical report numbers include 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000,
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095.
3
Please identify the specific other HTS statistical reporting numbers which your firm classifies its imports of
CAAS: .
4
Internal consumption and transfers to related firms must be valued at fair market value. If your firm uses a
different basis for valuing these transactions in your records, please specify that basis (e.g., cost, cost plus, etc.):
. However, the data provided above in this table should be based on fair market value.
5
Identify your firm’s principal export markets: .
2
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 22
II‐8a. U.S. imports from Egypt.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.‐‐Generally, the data reported for the
end‐of‐period inventories (i.e., lines N) should be equal to the beginning‐of‐period inventories (i.e., line
A), plus imports (i.e., lines B and D), less total shipments (i.e., lines F, H, J and L). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your
firm’s records; and also provide any likely explanations for any differences (e.g., theft, loss, damage,
record systems issues, etc.) if they exist.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation
2017
2018
A + B + D ‐ F ‐ H ‐ J ‐ L ‐ N = should equal
zero ("0") or provide an explanation.1
0
2019
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate: .
II‐8b. Channels of distribution: Egypt.‐‐Report your firm’s U.S. shipments (i.e. inclusive of commercial
U.S. shipments, internal consumption, and transfers to related firms) of imports from Egypt by
channel of distribution during the specified periods.
Egypt
Calendar Years
Item
2017
2018
2019
Quantity (in short tons)
Channels of distribution:
U.S. shipments:
To distributors (O)
To converters (P)
To end users (Q)
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities reported for channels of distribution
(i.e., lines O, P and Q) in each time period equal the quantity reported for U.S. shipments (i.e., line F, H, J)
in each time period. If the calculated fields below return values other than zero (i.e., “0”), the data
reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation item
O + P + Q – F – H – J= zero
("0"), if not revise.
2017
2018
0
2019
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
II‐8c.
Page 23
U.S. shipments by product type: Egypt.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports of
CAAS from Egypt.
Egypt
Quantity (in short tons), value (in $1,000)
Item
Calendar years
2017
U.S. shipments.‐‐
Non‐clad 1XXX series:
Quantity (R)
2018
2019
Value (W)
Clad or multi‐alloy:
Quantity (X)
Value (Y)
All other in‐scope
products:1
Quantity (Z)
Value (AA)
Value (S)
Non‐clad 3XXX series:
Quantity (T)
Value (U)
Non‐clad 5XXX series:
Quantity (V)
1
Describe these products:
RECONCILIATION OF U.S. SHIPMENTS.‐‐Please ensure that the quantities and values reported for US
shipments by product type (i.e., lines R through AA) equal the quantity and value reported for U.S.
shipments (i.e., lines F through K) in part "a" of this question. If the calculated fields below return values
other than zero (i.e., “0”), the data reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Year
Reconciliation
Quantity: R + T + V + X + Z – F – H – J = zero
("0"), if not revise.
Value: S + U + W + Y + AA– G – I – K = zero
("0"), if not revise.
2017
2018
2019
0
0
0
0
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 24
II‐9a. U.S. imports from Germany.–Report your firm’s imports and your firm’s shipments and
inventories of common alloy aluminum sheet imported from Germany by your firm during the
specified periods.
Germany
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2017
2018
2019
Beginning‐of‐period inventories
(quantity) (A)
Imports:1
Entering under Primary HTS
statistical reporting numbers:2
Quantity (B)
Entering under other HTS
statistical reporting numbers:3
Quantity (D)
Value (E)
Value (C)
U.S. shipments:
Commercial shipments:
Quantity (F)
Value (G)
Internal consumption:
Quantity (H)
4
4
Value (I)
Transfers to related firms:
Quantity (J)
4
Value (K)
Export shipments:
Quantity (L)
5
Value (M)
End‐of‐period inventories
(quantity) (N)
1
4
Please identify the foreign producers, if known: .
Primary HTS statistical report numbers include 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000,
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095.
3
Please identify the specific other HTS statistical reporting numbers which your firm classifies its imports of
CAAS: .
4
Internal consumption and transfers to related firms must be valued at fair market value. If your firm uses a
different basis for valuing these transactions in your records, please specify that basis (e.g., cost, cost plus, etc.):
. However, the data provided above in this table should be based on fair market value.
5
Identify your firm’s principal export markets: .
2
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 25
II‐9a. U.S. imports from Germany.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.‐‐Generally, the data reported for the
end‐of‐period inventories (i.e., lines N) should be equal to the beginning‐of‐period inventories (i.e., line
A), plus imports (i.e., lines B and D), less total shipments (i.e., lines F, H, J and L). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your
firm’s records; and also provide any likely explanations for any differences (e.g., theft, loss, damage,
record systems issues, etc.) if they exist.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation
2017
A + B + D ‐ F ‐ H ‐ J ‐ L ‐ N = should equal
zero ("0") or provide an explanation.1
2018
0
2019
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate: .
II‐9b. Channels of distribution: Germany.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports
from Germany by channel of distribution during the specified periods.
Germany
Calendar Years
Item
2017
2018
2019
Quantity (in short tons)
Channels of distribution:
U.S. shipments:
To distributors (O)
To converters (P)
To end users (Q)
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities reported for channels of distribution
(i.e., lines O, P and Q) in each time period equal the quantity reported for U.S. shipments (i.e., line F, H, J)
in each time period. If the calculated fields below return values other than zero (i.e., “0”), the data
reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation item
O + P + Q – F – H – J= zero
("0"), if not revise.
2017
2018
0
2019
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
II‐9c.
Page 26
U.S. shipments by product type: Germany.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports of
CAAS from Germany.
Germany
Quantity (in short tons), value (in $1,000)
Item
Calendar years
2017
U.S. shipments.‐‐
Non‐clad 1XXX series:
Quantity (R)
2018
2019
Value (W)
Clad or multi‐alloy:
Quantity (X)
Value (Y)
All other in‐scope
products:1
Quantity (Z)
Value (AA)
Value (S)
Non‐clad 3XXX series:
Quantity (T)
Value (U)
Non‐clad 5XXX series:
Quantity (V)
1
Describe these products:
RECONCILIATION OF U.S. SHIPMENTS.‐‐Please ensure that the quantities and values reported for US
shipments by product type (i.e., lines R through AA) equal the quantity and value reported for U.S.
shipments (i.e., lines F through K) in part "a" of this question. If the calculated fields below return values
other than zero (i.e., “0”), the data reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Year
Reconciliation
Quantity: R + T + V + X + Z – F – H – J = zero
("0"), if not revise.
Value: S + U + W + Y + AA– G – I – K = zero
("0"), if not revise.
2017
2018
2019
0
0
0
0
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 27
II‐10a. U.S. imports from Greece.–Report your firm’s imports and your firm’s shipments and
inventories of common alloy aluminum sheet imported from Greece by your firm during the
specified periods.
Greece
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2017
2018
2019
Beginning‐of‐period inventories
(quantity) (A)
Imports:1
Entering under Primary HTS
statistical reporting numbers:2
Quantity (B)
Entering under other HTS
statistical reporting numbers:3
Quantity (D)
Value (E)
Value (C)
U.S. shipments:
Commercial shipments:
Quantity (F)
Value (G)
Internal consumption:
Quantity (H)
4
4
Value (I)
Transfers to related firms:
Quantity (J)
4
Value (K)
Export shipments:
Quantity (L)
5
Value (M)
End‐of‐period inventories
(quantity) (N)
1
4
Please identify the foreign producers, if known: .
Primary HTS statistical report numbers include 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000,
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095.
3
Please identify the specific other HTS statistical reporting numbers which your firm classifies its imports of
CAAS: .
4
Internal consumption and transfers to related firms must be valued at fair market value. If your firm uses a
different basis for valuing these transactions in your records, please specify that basis (e.g., cost, cost plus, etc.):
. However, the data provided above in this table should be based on fair market value.
5
Identify your firm’s principal export markets: .
2
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 28
II‐10a. U.S. imports from Greece.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.‐‐Generally, the data reported for the
end‐of‐period inventories (i.e., lines N) should be equal to the beginning‐of‐period inventories (i.e., line
A), plus imports (i.e., lines B and D), less total shipments (i.e., lines F, H, J and L). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your
firm’s records; and also provide any likely explanations for any differences (e.g., theft, loss, damage,
record systems issues, etc.) if they exist.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation
2017
A + B + D ‐ F ‐ H ‐ J ‐ L ‐ N = should equal
zero ("0") or provide an explanation.1
2018
0
2019
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate: .
II‐10b. Channels of distribution: Greece.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports
from Greece by channel of distribution during the specified periods.
Greece
Calendar Years
Item
2017
2018
2019
Quantity (in short tons)
Channels of distribution:
U.S. shipments:
To distributors (O)
To converters (P)
To end users (Q)
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities reported for channels of distribution
(i.e., lines O, P and Q) in each time period equal the quantity reported for U.S. shipments (i.e., line F, H, J)
in each time period. If the calculated fields below return values other than zero (i.e., “0”), the data
reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation item
O + P + Q – F – H – J= zero
("0"), if not revise.
2017
2018
0
2019
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 29
II‐10c. U.S. shipments by product type: Greece.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports of
CAAS from Greece.
Greece
Quantity (in short tons), value (in $1,000)
Item
Calendar years
2017
U.S. shipments.‐‐
Non‐clad 1XXX series:
Quantity (R)
2018
2019
Value (W)
Clad or multi‐alloy:
Quantity (X)
Value (Y)
All other in‐scope
products:1
Quantity (Z)
Value (AA)
Value (S)
Non‐clad 3XXX series:
Quantity (T)
Value (U)
Non‐clad 5XXX series:
Quantity (V)
1
Describe these products:
RECONCILIATION OF U.S. SHIPMENTS.‐‐Please ensure that the quantities and values reported for US
shipments by product type (i.e., lines R through AA) equal the quantity and value reported for U.S.
shipments (i.e., lines F through K) in part "a" of this question. If the calculated fields below return values
other than zero (i.e., “0”), the data reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Year
Reconciliation
Quantity: R + T + V + X + Z – F – H – J = zero
("0"), if not revise.
Value: S + U + W + Y + AA– G – I – K = zero
("0"), if not revise.
2017
2018
2019
0
0
0
0
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 30
II‐11a. U.S. imports from India.–Report your firm’s imports and your firm’s shipments and inventories
of common alloy aluminum sheet imported from India by your firm during the specified periods.
India
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2017
Beginning‐of‐period inventories
(quantity) (A)
2018
2019
Entering under other HTS
statistical reporting numbers:3
Quantity (D)
Value (E)
1
Imports:
Entering under Primary HTS
statistical reporting numbers:2
Quantity (B)
Value (C)
U.S. shipments:
Commercial shipments:
Quantity (F)
Value (G)
Internal consumption:
Quantity (H)
4
Value4(I)
Transfers to related firms:
Quantity (J)
4
Value (K)
Export shipments:5
Quantity (L)
Value (M)
End‐of‐period inventories
(quantity) (N)
1
4
Please identify the foreign producers, if known: .
Primary HTS statistical report numbers include 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000,
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095.
3
Please identify the specific other HTS statistical reporting numbers which your firm classifies its imports of
CAAS: .
4
Internal consumption and transfers to related firms must be valued at fair market value. If your firm uses a
different basis for valuing these transactions in your records, please specify that basis (e.g., cost, cost plus, etc.):
. However, the data provided above in this table should be based on fair market value.
5
Identify your firm’s principal export markets: .
2
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 31
II‐11a. U.S. imports from India.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.‐‐Generally, the data reported for the
end‐of‐period inventories (i.e., lines N) should be equal to the beginning‐of‐period inventories (i.e., line
A), plus imports (i.e., lines B and D), less total shipments (i.e., lines F, H, J and L). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your
firm’s records; and also provide any likely explanations for any differences (e.g., theft, loss, damage,
record systems issues, etc.) if they exist.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation
2017
2018
A + B + D ‐ F ‐ H ‐ J ‐ L ‐ N = should equal
zero ("0") or provide an explanation.1
0
2019
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate: .
II‐11b. Channels of distribution: India.‐‐Report your firm’s U.S. shipments (i.e. inclusive of commercial
U.S. shipments, internal consumption, and transfers to related firms) of imports from India by
channel of distribution during the specified periods.
India
Calendar Years
Item
2017
2018
2019
Quantity (in short tons)
Channels of distribution:
U.S. shipments:
To distributors (O)
To converters (P)
To end users (Q)
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities reported for channels of distribution
(i.e., lines O, P and Q) in each time period equal the quantity reported for U.S. shipments (i.e., line F, H, J)
in each time period. If the calculated fields below return values other than zero (i.e., “0”), the data
reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation item
O + P + Q – F – H – J= zero
("0"), if not revise.
2017
2018
0
2019
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 32
II‐11c. U.S. shipments by product type: India.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports of
CAAS from India.
India
Quantity (in short tons), value (in $1,000)
Item
Calendar years
2017
U.S. shipments.‐‐
Non‐clad 1XXX series:
Quantity (R)
2018
2019
Value (W)
Clad or multi‐alloy:
Quantity (X)
Value (Y)
All other in‐scope
products:1
Quantity (Z)
Value (AA)
Value (S)
Non‐clad 3XXX series:
Quantity (T)
Value (U)
Non‐clad 5XXX series:
Quantity (V)
1
Describe these products:
RECONCILIATION OF U.S. SHIPMENTS.‐‐Please ensure that the quantities and values reported for US
shipments by product type (i.e., lines R through AA) equal the quantity and value reported for U.S.
shipments (i.e., lines F through K) in part "a" of this question. If the calculated fields below return values
other than zero (i.e., “0”), the data reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Year
Reconciliation
Quantity: R + T + V + X + Z – F – H – J = zero
("0"), if not revise.
Value: S + U + W + Y + AA– G – I – K = zero
("0"), if not revise.
2017
2018
2019
0
0
0
0
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 33
II‐12a. U.S. imports from Indonesia.–Report your firm’s imports and your firm’s shipments and
inventories of common alloy aluminum sheet imported from Indonesia by your firm during the
specified periods.
Indonesia
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2017
2018
2019
Beginning‐of‐period inventories
(quantity) (A)
Imports:1
Entering under Primary HTS
statistical reporting numbers:2
Quantity (B)
Entering under other HTS
statistical reporting numbers:3
Quantity (D)
Value (E)
Value (C)
U.S. shipments:
Commercial shipments:
Quantity (F)
Value (G)
Internal consumption:
Quantity (H)
4
4
Value (I)
Transfers to related firms:
Quantity (J)
4
Value (K)
Export shipments:
Quantity (L)
5
Value (M)
End‐of‐period inventories
(quantity) (N)
1
4
Please identify the foreign producers, if known: .
Primary HTS statistical report numbers include 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000,
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095.
3
Please identify the specific other HTS statistical reporting numbers which your firm classifies its imports of
CAAS: .
4
Internal consumption and transfers to related firms must be valued at fair market value. If your firm uses a
different basis for valuing these transactions in your records, please specify that basis (e.g., cost, cost plus, etc.):
. However, the data provided above in this table should be based on fair market value.
5
Identify your firm’s principal export markets: .
2
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 34
II‐12a. U.S. imports from Indonesia.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.‐‐Generally, the data reported for the
end‐of‐period inventories (i.e., lines N) should be equal to the beginning‐of‐period inventories (i.e., line
A), plus imports (i.e., lines B and D), less total shipments (i.e., lines F, H, J and L). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your
firm’s records; and also provide any likely explanations for any differences (e.g., theft, loss, damage,
record systems issues, etc.) if they exist.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation
2017
A + B + D ‐ F ‐ H ‐ J ‐ L ‐ N = should equal
zero ("0") or provide an explanation.1
2018
0
2019
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate: .
II‐12b. Channels of distribution: Indonesia.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports
from Indonesia by channel of distribution during the specified periods.
Indonesia
Calendar Years
Item
2017
2018
2019
Quantity (in short tons)
Channels of distribution:
U.S. shipments:
To distributors (O)
To converters (P)
To end users (Q)
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities reported for channels of distribution
(i.e., lines O, P and Q) in each time period equal the quantity reported for U.S. shipments (i.e., line F, H, J)
in each time period. If the calculated fields below return values other than zero (i.e., “0”), the data
reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation item
O + P + Q – F – H – J= zero
("0"), if not revise.
2017
2018
0
2019
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 35
II‐12c. U.S. shipments by product type: Indonesia.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports of
CAAS from Indonesia.
Indonesia
Quantity (in short tons), value (in $1,000)
Item
Calendar years
2017
U.S. shipments.‐‐
Non‐clad 1XXX series:
Quantity (R)
2018
2019
Value (W)
Clad or multi‐alloy:
Quantity (X)
Value (Y)
All other in‐scope
products:1
Quantity (Z)
Value (AA)
Value (S)
Non‐clad 3XXX series:
Quantity (T)
Value (U)
Non‐clad 5XXX series:
Quantity (V)
1
Describe these products:
RECONCILIATION OF U.S. SHIPMENTS.‐‐Please ensure that the quantities and values reported for US
shipments by product type (i.e., lines R through AA) equal the quantity and value reported for U.S.
shipments (i.e., lines F through K) in part "a" of this question. If the calculated fields below return values
other than zero (i.e., “0”), the data reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Year
Reconciliation
Quantity: R + T + V + X + Z – F – H – J = zero
("0"), if not revise.
Value: S + U + W + Y + AA– G – I – K = zero
("0"), if not revise.
2017
2018
2019
0
0
0
0
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 36
II‐13a. U.S. imports from Italy.–Report your firm’s imports and your firm’s shipments and inventories
of common alloy aluminum sheet imported from Italy by your firm during the specified periods.
Italy
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2017
Beginning‐of‐period inventories
(quantity) (A)
2018
2019
Entering under other HTS
statistical reporting numbers:3
Quantity (D)
Value (E)
1
Imports:
Entering under Primary HTS
statistical reporting numbers:2
Quantity (B)
Value (C)
U.S. shipments:
Commercial shipments:
Quantity (F)
Value (G)
Internal consumption:
Quantity (H)
4
Value4(I)
Transfers to related firms:
Quantity (J)
4
Value (K)
Export shipments:5
Quantity (L)
Value (M)
End‐of‐period inventories
(quantity) (N)
1
4
Please identify the foreign producers, if known: .
Primary HTS statistical report numbers include 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000,
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095.
3
Please identify the specific other HTS statistical reporting numbers which your firm classifies its imports of
CAAS: .
4
Internal consumption and transfers to related firms must be valued at fair market value. If your firm uses a
different basis for valuing these transactions in your records, please specify that basis (e.g., cost, cost plus, etc.):
. However, the data provided above in this table should be based on fair market value.
5
Identify your firm’s principal export markets: .
2
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 37
II‐13a. U.S. imports from Italy.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.‐‐Generally, the data reported for the
end‐of‐period inventories (i.e., lines N) should be equal to the beginning‐of‐period inventories (i.e., line
A), plus imports (i.e., lines B and D), less total shipments (i.e., lines F, H, J and L). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your
firm’s records; and also provide any likely explanations for any differences (e.g., theft, loss, damage,
record systems issues, etc.) if they exist.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation
2017
2018
A + B + D ‐ F ‐ H ‐ J ‐ L ‐ N = should equal
zero ("0") or provide an explanation.1
0
2019
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate: .
II‐13b. Channels of distribution: Italy.‐‐Report your firm’s U.S. shipments (i.e. inclusive of commercial
U.S. shipments, internal consumption, and transfers to related firms) of imports from Italy by
channel of distribution during the specified periods.
Italy
Calendar Years
Item
2017
2018
2019
Quantity (in short tons)
Channels of distribution:
U.S. shipments:
To distributors (O)
To converters (P)
To end users (Q)
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities reported for channels of distribution
(i.e., lines O, P and Q) in each time period equal the quantity reported for U.S. shipments (i.e., line F, H, J)
in each time period. If the calculated fields below return values other than zero (i.e., “0”), the data
reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation item
O + P + Q – F – H – J= zero
("0"), if not revise.
2017
2018
0
2019
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 38
II‐13c. U.S. shipments by product type: Italy.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports of
CAAS from Italy.
Italy
Quantity (in short tons), value (in $1,000)
Item
Calendar years
2017
U.S. shipments.‐‐
Non‐clad 1XXX series:
Quantity (R)
2018
2019
Value (W)
Clad or multi‐alloy:
Quantity (X)
Value (Y)
All other in‐scope
products:1
Quantity (Z)
Value (AA)
Value (S)
Non‐clad 3XXX series:
Quantity (T)
Value (U)
Non‐clad 5XXX series:
Quantity (V)
1
Describe these products:
RECONCILIATION OF U.S. SHIPMENTS.‐‐Please ensure that the quantities and values reported for US
shipments by product type (i.e., lines R through AA) equal the quantity and value reported for U.S.
shipments (i.e., lines F through K) in part "a" of this question. If the calculated fields below return values
other than zero (i.e., “0”), the data reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Year
Reconciliation
Quantity: R + T + V + X + Z – F – H – J = zero
("0"), if not revise.
Value: S + U + W + Y + AA– G – I – K = zero
("0"), if not revise.
2017
2018
2019
0
0
0
0
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 39
II‐14a. U.S. imports from Korea.–Report your firm’s imports and your firm’s shipments and inventories
of common alloy aluminum sheet imported from Korea by your firm during the specified
periods.
Korea
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2017
2018
2019
Beginning‐of‐period inventories
(quantity) (A)
Imports:1
Entering under Primary HTS
statistical reporting numbers:2
Quantity (B)
Entering under other HTS
statistical reporting numbers:3
Quantity (D)
Value (E)
Value (C)
U.S. shipments:
Commercial shipments:
Quantity (F)
Value (G)
Internal consumption:
Quantity (H)
4
4
Value (I)
Transfers to related firms:
Quantity (J)
4
Value (K)
Export shipments:
Quantity (L)
5
Value (M)
End‐of‐period inventories
(quantity) (N)
1
4
Please identify the foreign producers, if known: .
Primary HTS statistical report numbers include 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000,
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095.
3
Please identify the specific other HTS statistical reporting numbers which your firm classifies its imports of
CAAS: .
4
Internal consumption and transfers to related firms must be valued at fair market value. If your firm uses a
different basis for valuing these transactions in your records, please specify that basis (e.g., cost, cost plus, etc.):
. However, the data provided above in this table should be based on fair market value.
5
Identify your firm’s principal export markets: .
2
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 40
II‐14a. U.S. imports from Korea.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.‐‐Generally, the data reported for the
end‐of‐period inventories (i.e., lines N) should be equal to the beginning‐of‐period inventories (i.e., line
A), plus imports (i.e., lines B and D), less total shipments (i.e., lines F, H, J and L). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your
firm’s records; and also provide any likely explanations for any differences (e.g., theft, loss, damage,
record systems issues, etc.) if they exist.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation
2017
A + B + D ‐ F ‐ H ‐ J ‐ L ‐ N = should equal
zero ("0") or provide an explanation.1
2018
0
2019
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate: .
II‐14b. Channels of distribution: Korea.‐‐Report your firm’s U.S. shipments (i.e. inclusive of commercial
U.S. shipments, internal consumption, and transfers to related firms) of imports from Korea by
channel of distribution during the specified periods.
Korea
Calendar Years
Item
2017
2018
2019
Quantity (in short tons)
Channels of distribution:
U.S. shipments:
To distributors (O)
To converters (P)
To end users (Q)
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities reported for channels of distribution
(i.e., lines O, P and Q) in each time period equal the quantity reported for U.S. shipments (i.e., line F, H, J)
in each time period. If the calculated fields below return values other than zero (i.e., “0”), the data
reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation item
O + P + Q – F – H – J= zero
("0"), if not revise.
2017
2018
0
2019
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 41
II‐14c. U.S. shipments by product type: Korea.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports of
CAAS from Korea.
Korea
Quantity (in short tons), value (in $1,000)
Item
Calendar years
2017
U.S. shipments.‐‐
Non‐clad 1XXX series:
Quantity (R)
2018
2019
Value (W)
Clad or multi‐alloy:
Quantity (X)
Value (Y)
All other in‐scope
products:1
Quantity (Z)
Value (AA)
Value (S)
Non‐clad 3XXX series:
Quantity (T)
Value (U)
Non‐clad 5XXX series:
Quantity (V)
1
Describe these products:
RECONCILIATION OF U.S. SHIPMENTS.‐‐Please ensure that the quantities and values reported for US
shipments by product type (i.e., lines R through AA) equal the quantity and value reported for U.S.
shipments (i.e., lines F through K) in part "a" of this question. If the calculated fields below return values
other than zero (i.e., “0”), the data reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Year
Reconciliation
Quantity: R + T + V + X + Z – F – H – J = zero
("0"), if not revise.
Value: S + U + W + Y + AA– G – I – K = zero
("0"), if not revise.
2017
2018
2019
0
0
0
0
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 42
II‐15a. U.S. imports from Oman.–Report your firm’s imports and your firm’s shipments and inventories
of common alloy aluminum sheet imported from Oman by your firm during the specified
periods.
Oman
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2017
2018
2019
Beginning‐of‐period inventories
(quantity) (A)
Imports:1
Entering under Primary HTS
statistical reporting numbers:2
Quantity (B)
Entering under other HTS
statistical reporting numbers:3
Quantity (D)
Value (E)
Value (C)
U.S. shipments:
Commercial shipments:
Quantity (F)
Value (G)
Internal consumption:
Quantity (H)
4
4
Value (I)
Transfers to related firms:
Quantity (J)
4
Value (K)
Export shipments:
Quantity (L)
5
Value (M)
End‐of‐period inventories
(quantity) (N)
1
4
Please identify the foreign producers, if known: .
Primary HTS statistical report numbers include 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000,
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095.
3
Please identify the specific other HTS statistical reporting numbers which your firm classifies its imports of
CAAS: .
4
Internal consumption and transfers to related firms must be valued at fair market value. If your firm uses a
different basis for valuing these transactions in your records, please specify that basis (e.g., cost, cost plus, etc.):
. However, the data provided above in this table should be based on fair market value.
5
Identify your firm’s principal export markets: .
2
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 43
II‐15a. U.S. imports from Oman.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.‐‐Generally, the data reported for the
end‐of‐period inventories (i.e., lines N) should be equal to the beginning‐of‐period inventories (i.e., line
A), plus imports (i.e., lines B and D), less total shipments (i.e., lines F, H, J and L). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your
firm’s records; and also provide any likely explanations for any differences (e.g., theft, loss, damage,
record systems issues, etc.) if they exist.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation
2017
A + B + D ‐ F ‐ H ‐ J ‐ L ‐ N = should equal
zero ("0") or provide an explanation.1
2018
0
2019
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate: .
II‐15b. Channels of distribution: Oman.‐‐Report your firm’s U.S. shipments (i.e. inclusive of commercial
U.S. shipments, internal consumption, and transfers to related firms) of imports from Oman by
channel of distribution during the specified periods.
Oman
Calendar Years
Item
2017
2018
2019
Quantity (in short tons)
Channels of distribution:
U.S. shipments:
To distributors (O)
To converters (P)
To end users (Q)
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities reported for channels of distribution
(i.e., lines O, P and Q) in each time period equal the quantity reported for U.S. shipments (i.e., line F, H, J)
in each time period. If the calculated fields below return values other than zero (i.e., “0”), the data
reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation item
O + P + Q – F – H – J= zero
("0"), if not revise.
2017
2018
0
2019
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 44
II‐15c. U.S. shipments by product type: Oman.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports of
CAAS from Oman.
Oman
Quantity (in short tons), value (in $1,000)
Item
Calendar years
2017
U.S. shipments.‐‐
Non‐clad 1XXX series:
Quantity (R)
2018
2019
Value (W)
Clad or multi‐alloy:
Quantity (X)
Value (Y)
All other in‐scope
products:1
Quantity (Z)
Value (AA)
Value (S)
Non‐clad 3XXX series:
Quantity (T)
Value (U)
Non‐clad 5XXX series:
Quantity (V)
1
Describe these products:
RECONCILIATION OF U.S. SHIPMENTS.‐‐Please ensure that the quantities and values reported for US
shipments by product type (i.e., lines R through AA) equal the quantity and value reported for U.S.
shipments (i.e., lines F through K) in part "a" of this question. If the calculated fields below return values
other than zero (i.e., “0”), the data reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Year
Reconciliation
Quantity: R + T + V + X + Z – F – H – J = zero
("0"), if not revise.
Value: S + U + W + Y + AA– G – I – K = zero
("0"), if not revise.
2017
2018
2019
0
0
0
0
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 45
II‐16a. U.S. imports from Romania.–Report your firm’s imports and your firm’s shipments and
inventories of common alloy aluminum sheet imported from Romania by your firm during the
specified periods.
Romania
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2017
2018
2019
Beginning‐of‐period inventories
(quantity) (A)
Imports:1
Entering under Primary HTS
statistical reporting numbers:2
Quantity (B)
Entering under other HTS
statistical reporting numbers:3
Quantity (D)
Value (E)
Value (C)
U.S. shipments:
Commercial shipments:
Quantity (F)
Value (G)
Internal consumption:
Quantity (H)
4
4
Value (I)
Transfers to related firms:
Quantity (J)
4
Value (K)
Export shipments:
Quantity (L)
5
Value (M)
End‐of‐period inventories
(quantity) (N)
1
4
Please identify the foreign producers, if known: .
Primary HTS statistical report numbers include 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000,
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095.
3
Please identify the specific other HTS statistical reporting numbers which your firm classifies its imports of
CAAS: .
4
Internal consumption and transfers to related firms must be valued at fair market value. If your firm uses a
different basis for valuing these transactions in your records, please specify that basis (e.g., cost, cost plus, etc.):
. However, the data provided above in this table should be based on fair market value.
5
Identify your firm’s principal export markets: .
2
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 46
II‐16a. U.S. imports from Romania.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.‐‐Generally, the data reported for the
end‐of‐period inventories (i.e., lines N) should be equal to the beginning‐of‐period inventories (i.e., line
A), plus imports (i.e., lines B and D), less total shipments (i.e., lines F, H, J and L). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your
firm’s records; and also provide any likely explanations for any differences (e.g., theft, loss, damage,
record systems issues, etc.) if they exist.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation
2017
A + B + D ‐ F ‐ H ‐ J ‐ L ‐ N = should equal
zero ("0") or provide an explanation.1
2018
0
2019
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate: .
II‐16b. Channels of distribution: Romania.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports
from Romania by channel of distribution during the specified periods.
Romania
Calendar Years
Item
2017
2018
2019
Quantity (in short tons)
Channels of distribution:
U.S. shipments:
To distributors (O)
To converters (P)
To end users (Q)
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities reported for channels of distribution
(i.e., lines O, P and Q) in each time period equal the quantity reported for U.S. shipments (i.e., line F, H, J)
in each time period. If the calculated fields below return values other than zero (i.e., “0”), the data
reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation item
O + P + Q – F – H – J= zero
("0"), if not revise.
2017
2018
0
2019
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 47
II‐16c. U.S. shipments by product type: Romania.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports of
CAAS from Romania.
Romania
Quantity (in short tons), value (in $1,000)
Item
Calendar years
2017
U.S. shipments.‐‐
Non‐clad 1XXX series:
Quantity (R)
2018
2019
Value (W)
Clad or multi‐alloy:
Quantity (X)
Value (Y)
All other in‐scope
products:1
Quantity (Z)
Value (AA)
Value (S)
Non‐clad 3XXX series:
Quantity (T)
Value (U)
Non‐clad 5XXX series:
Quantity (V)
1
Describe these products:
RECONCILIATION OF U.S. SHIPMENTS.‐‐Please ensure that the quantities and values reported for US
shipments by product type (i.e., lines R through AA) equal the quantity and value reported for U.S.
shipments (i.e., lines F through K) in part "a" of this question. If the calculated fields below return values
other than zero (i.e., “0”), the data reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Year
Reconciliation
Quantity: R + T + V + X + Z – F – H – J = zero
("0"), if not revise.
Value: S + U + W + Y + AA– G – I – K = zero
("0"), if not revise.
2017
2018
2019
0
0
0
0
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 48
II‐17a. U.S. imports from Serbia.–Report your firm’s imports and your firm’s shipments and inventories
of common alloy aluminum sheet imported from Serbia by your firm during the specified
periods.
Serbia
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2017
2018
2019
Beginning‐of‐period inventories
(quantity) (A)
Imports:1
Entering under Primary HTS
statistical reporting numbers:2
Quantity (B)
Entering under other HTS
statistical reporting numbers:3
Quantity (D)
Value (E)
Value (C)
U.S. shipments:
Commercial shipments:
Quantity (F)
Value (G)
Internal consumption:
Quantity (H)
4
4
Value (I)
Transfers to related firms:
Quantity (J)
4
Value (K)
Export shipments:
Quantity (L)
5
Value (M)
End‐of‐period inventories
(quantity) (N)
1
4
Please identify the foreign producers, if known: .
Primary HTS statistical report numbers include 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000,
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095.
3
Please identify the specific other HTS statistical reporting numbers which your firm classifies its imports of
CAAS: .
4
Internal consumption and transfers to related firms must be valued at fair market value. If your firm uses a
different basis for valuing these transactions in your records, please specify that basis (e.g., cost, cost plus, etc.):
. However, the data provided above in this table should be based on fair market value.
5
Identify your firm’s principal export markets: .
2
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 49
II‐17a. U.S. imports from Serbia.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.‐‐Generally, the data reported for the
end‐of‐period inventories (i.e., lines N) should be equal to the beginning‐of‐period inventories (i.e., line
A), plus imports (i.e., lines B and D), less total shipments (i.e., lines F, H, J and L). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your
firm’s records; and also provide any likely explanations for any differences (e.g., theft, loss, damage,
record systems issues, etc.) if they exist.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation
2017
A + B + D ‐ F ‐ H ‐ J ‐ L ‐ N = should equal
zero ("0") or provide an explanation.1
2018
0
2019
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate: .
II‐17b. Channels of distribution: Serbia.‐‐Report your firm’s U.S. shipments (i.e. inclusive of commercial
U.S. shipments, internal consumption, and transfers to related firms) of imports from Serbia by
channel of distribution during the specified periods.
Serbia
Calendar Years
Item
2017
2018
2019
Quantity (in short tons)
Channels of distribution:
U.S. shipments:
To distributors (O)
To converters (P)
To end users (Q)
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities reported for channels of distribution
(i.e., lines O, P and Q) in each time period equal the quantity reported for U.S. shipments (i.e., line F, H, J)
in each time period. If the calculated fields below return values other than zero (i.e., “0”), the data
reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation item
O + P + Q – F – H – J= zero
("0"), if not revise.
2017
2018
0
2019
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 50
II‐17c. U.S. shipments by product type: Serbia.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports of
CAAS from Serbia.
Serbia
Quantity (in short tons), value (in $1,000)
Item
Calendar years
2017
U.S. shipments.‐‐
Non‐clad 1XXX series:
Quantity (R)
2018
2019
Value (W)
Clad or multi‐alloy:
Quantity (X)
Value (Y)
All other in‐scope
products:1
Quantity (Z)
Value (AA)
Value (S)
Non‐clad 3XXX series:
Quantity (T)
Value (U)
Non‐clad 5XXX series:
Quantity (V)
1
Describe these products:
RECONCILIATION OF U.S. SHIPMENTS.‐‐Please ensure that the quantities and values reported for US
shipments by product type (i.e., lines R through AA) equal the quantity and value reported for U.S.
shipments (i.e., lines F through K) in part "a" of this question. If the calculated fields below return values
other than zero (i.e., “0”), the data reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Year
Reconciliation
Quantity: R + T + V + X + Z – F – H – J = zero
("0"), if not revise.
Value: S + U + W + Y + AA– G – I – K = zero
("0"), if not revise.
2017
2018
2019
0
0
0
0
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 51
II‐18a. U.S. imports from Slovenia.–Report your firm’s imports and your firm’s shipments and
inventories of common alloy aluminum sheet imported from Slovenia by your firm during the
specified periods.
Slovenia
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2017
2018
2019
Beginning‐of‐period inventories
(quantity) (A)
Imports:1
Entering under Primary HTS
statistical reporting numbers:2
Quantity (B)
Entering under other HTS
statistical reporting numbers:3
Quantity (D)
Value (E)
Value (C)
U.S. shipments:
Commercial shipments:
Quantity (F)
Value (G)
Internal consumption:
Quantity (H)
4
4
Value (I)
Transfers to related firms:
Quantity (J)
4
Value (K)
Export shipments:
Quantity (L)
5
Value (M)
End‐of‐period inventories
(quantity) (N)
1
4
Please identify the foreign producers, if known: .
Primary HTS statistical report numbers include 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000,
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095.
3
Please identify the specific other HTS statistical reporting numbers which your firm classifies its imports of
CAAS: .
4
Internal consumption and transfers to related firms must be valued at fair market value. If your firm uses a
different basis for valuing these transactions in your records, please specify that basis (e.g., cost, cost plus, etc.):
. However, the data provided above in this table should be based on fair market value.
5
Identify your firm’s principal export markets: .
2
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 52
II‐18a. U.S. imports from Slovenia.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.‐‐Generally, the data reported for the
end‐of‐period inventories (i.e., lines N) should be equal to the beginning‐of‐period inventories (i.e., line
A), plus imports (i.e., lines B and D), less total shipments (i.e., lines F, H, J and L). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your
firm’s records; and also provide any likely explanations for any differences (e.g., theft, loss, damage,
record systems issues, etc.) if they exist.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation
2017
A + B + D ‐ F ‐ H ‐ J ‐ L ‐ N = should equal
zero ("0") or provide an explanation.1
2018
0
2019
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate: .
II‐18b. Channels of distribution: Slovenia.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports
from Slovenia by channel of distribution during the specified periods.
Slovenia
Calendar Years
Item
2017
2018
2019
Quantity (in short tons)
Channels of distribution:
U.S. shipments:
To distributors (O)
To converters (P)
To end users (Q)
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities reported for channels of distribution
(i.e., lines O, P and Q) in each time period equal the quantity reported for U.S. shipments (i.e., line F, H, J)
in each time period. If the calculated fields below return values other than zero (i.e., “0”), the data
reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation item
O + P + Q – F – H – J= zero
("0"), if not revise.
2017
2018
0
2019
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 53
II‐18c. U.S. shipments by product type: Slovenia.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports of
CAAS from Slovenia.
Slovenia
Quantity (in short tons), value (in $1,000)
Item
Calendar years
2017
U.S. shipments.‐‐
Non‐clad 1XXX series:
Quantity (R)
2018
2019
Value (W)
Clad or multi‐alloy:
Quantity (X)
Value (Y)
All other in‐scope
products:1
Quantity (Z)
Value (AA)
Value (S)
Non‐clad 3XXX series:
Quantity (T)
Value (U)
Non‐clad 5XXX series:
Quantity (V)
1
Describe these products:
RECONCILIATION OF U.S. SHIPMENTS.‐‐Please ensure that the quantities and values reported for US
shipments by product type (i.e., lines R through AA) equal the quantity and value reported for U.S.
shipments (i.e., lines F through K) in part "a" of this question. If the calculated fields below return values
other than zero (i.e., “0”), the data reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Year
Reconciliation
Quantity: R + T + V + X + Z – F – H – J = zero
("0"), if not revise.
Value: S + U + W + Y + AA– G – I – K = zero
("0"), if not revise.
2017
2018
2019
0
0
0
0
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 54
II‐19a. U.S. imports from South Africa.–Report your firm’s imports and your firm’s shipments and
inventories of common alloy aluminum sheet imported from South Africa by your firm during
the specified periods.
South Africa
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2017
2018
2019
Beginning‐of‐period inventories
(quantity) (A)
Imports:1
Entering under Primary HTS
statistical reporting numbers:2
Quantity (B)
Entering under other HTS
statistical reporting numbers:3
Quantity (D)
Value (E)
Value (C)
U.S. shipments:
Commercial shipments:
Quantity (F)
Value (G)
Internal consumption:
Quantity (H)
4
4
Value (I)
Transfers to related firms:
Quantity (J)
4
Value (K)
Export shipments:
Quantity (L)
5
Value (M)
End‐of‐period inventories
(quantity) (N)
1
4
Please identify the foreign producers, if known: .
Primary HTS statistical report numbers include 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000,
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095.
3
Please identify the specific other HTS statistical reporting numbers which your firm classifies its imports of
CAAS: .
4
Internal consumption and transfers to related firms must be valued at fair market value. If your firm uses a
different basis for valuing these transactions in your records, please specify that basis (e.g., cost, cost plus, etc.):
. However, the data provided above in this table should be based on fair market value.
5
Identify your firm’s principal export markets: .
2
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 55
II‐19a. U.S. imports from South Africa.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.‐‐Generally, the data reported for the
end‐of‐period inventories (i.e., lines N) should be equal to the beginning‐of‐period inventories (i.e., line
A), plus imports (i.e., lines B and D), less total shipments (i.e., lines F, H, J and L). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your
firm’s records; and also provide any likely explanations for any differences (e.g., theft, loss, damage,
record systems issues, etc.) if they exist.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation
2017
A + B + D ‐ F ‐ H ‐ J ‐ L ‐ N = should equal
zero ("0") or provide an explanation.1
2018
0
2019
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate: .
II‐19b. Channels of distribution: South Africa.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports
from South Africa by channel of distribution during the specified periods.
South Africa
Calendar Years
Item
2017
2018
2019
Quantity (in short tons)
Channels of distribution:
U.S. shipments:
To distributors (O)
To converters (P)
To end users (Q)
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities reported for channels of distribution
(i.e., lines O, P and Q) in each time period equal the quantity reported for U.S. shipments (i.e., line F, H, J)
in each time period. If the calculated fields below return values other than zero (i.e., “0”), the data
reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation item
O + P + Q – F – H – J= zero
("0"), if not revise.
2017
2018
0
2019
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 56
II‐19c. U.S. shipments by product type: South Africa.‐‐Report your firm’s U.S. shipments (i.e. inclusive
of commercial U.S. shipments, internal consumption, and transfers to related firms) of imports
of CAAS from South Africa.
South Africa
Quantity (in short tons), value (in $1,000)
Item
Calendar years
2017
U.S. shipments.‐‐
Non‐clad 1XXX series:
Quantity (R)
2018
2019
Value (W)
Clad or multi‐alloy:
Quantity (X)
Value (Y)
All other in‐scope
products:1
Quantity (Z)
Value (AA)
Value (S)
Non‐clad 3XXX series:
Quantity (T)
Value (U)
Non‐clad 5XXX series:
Quantity (V)
1
Describe these products:
RECONCILIATION OF U.S. SHIPMENTS.‐‐Please ensure that the quantities and values reported for US
shipments by product type (i.e., lines R through AA) equal the quantity and value reported for U.S.
shipments (i.e., lines F through K) in part "a" of this question. If the calculated fields below return values
other than zero (i.e., “0”), the data reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Year
Reconciliation
Quantity: R + T + V + X + Z – F – H – J = zero
("0"), if not revise.
Value: S + U + W + Y + AA– G – I – K = zero
("0"), if not revise.
2017
2018
2019
0
0
0
0
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 57
II‐20a. U.S. imports from Spain.–Report your firm’s imports and your firm’s shipments and inventories
of common alloy aluminum sheet imported from Spain by your firm during the specified
periods.
Spain
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2017
2018
2019
Beginning‐of‐period inventories
(quantity) (A)
Imports:1
Entering under Primary HTS
statistical reporting numbers:2
Quantity (B)
Entering under other HTS
statistical reporting numbers:3
Quantity (D)
Value (E)
Value (C)
U.S. shipments:
Commercial shipments:
Quantity (F)
Value (G)
Internal consumption:
Quantity (H)
4
4
Value (I)
Transfers to related firms:
Quantity (J)
4
Value (K)
Export shipments:
Quantity (L)
5
Value (M)
End‐of‐period inventories
(quantity) (N)
1
4
Please identify the foreign producers, if known: .
Primary HTS statistical report numbers include 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000,
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095.
3
Please identify the specific other HTS statistical reporting numbers which your firm classifies its imports of
CAAS: .
4
Internal consumption and transfers to related firms must be valued at fair market value. If your firm uses a
different basis for valuing these transactions in your records, please specify that basis (e.g., cost, cost plus, etc.):
. However, the data provided above in this table should be based on fair market value.
5
Identify your firm’s principal export markets: .
2
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 58
II‐20a. U.S. imports from Spain.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.‐‐Generally, the data reported for the
end‐of‐period inventories (i.e., lines N) should be equal to the beginning‐of‐period inventories (i.e., line
A), plus imports (i.e., lines B and D), less total shipments (i.e., lines F, H, J and L). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your
firm’s records; and also provide any likely explanations for any differences (e.g., theft, loss, damage,
record systems issues, etc.) if they exist.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation
2017
2018
A + B + D ‐ F ‐ H ‐ J ‐ L ‐ N = should equal
zero ("0") or provide an explanation.1
0
2019
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate: .
II‐20b. Channels of distribution: Spain.‐‐Report your firm’s U.S. shipments (i.e. inclusive of commercial
U.S. shipments, internal consumption, and transfers to related firms) of imports from Spain by
channel of distribution during the specified periods.
Spain
Calendar Years
Item
2017
2018
2019
Quantity (in short tons)
Channels of distribution:
U.S. shipments:
To distributors (O)
To converters (P)
To end users (Q)
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities reported for channels of distribution
(i.e., lines O, P and Q) in each time period equal the quantity reported for U.S. shipments (i.e., line F, H, J)
in each time period. If the calculated fields below return values other than zero (i.e., “0”), the data
reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation item
O + P + Q – F – H – J= zero
("0"), if not revise.
2017
2018
0
2019
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 59
II‐20c. U.S. shipments by product type: Spain.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports of
CAAS from Spain.
Spain
Quantity (in short tons), value (in $1,000)
Item
Calendar years
2017
U.S. shipments.‐‐
Non‐clad 1XXX series:
Quantity (R)
2018
2019
Value (W)
Clad or multi‐alloy:
Quantity (X)
Value (Y)
All other in‐scope
products:1
Quantity (Z)
Value (AA)
Value (S)
Non‐clad 3XXX series:
Quantity (T)
Value (U)
Non‐clad 5XXX series:
Quantity (V)
1
Describe these products:
RECONCILIATION OF U.S. SHIPMENTS.‐‐Please ensure that the quantities and values reported for US
shipments by product type (i.e., lines R through AA) equal the quantity and value reported for U.S.
shipments (i.e., lines F through K) in part "a" of this question. If the calculated fields below return values
other than zero (i.e., “0”), the data reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Year
Reconciliation
Quantity: R + T + V + X + Z – F – H – J = zero
("0"), if not revise.
Value: S + U + W + Y + AA– G – I – K = zero
("0"), if not revise.
2017
2018
2019
0
0
0
0
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 60
II‐21a. U.S. imports from Taiwan.–Report your firm’s imports and your firm’s shipments and
inventories of common alloy aluminum sheet imported from Taiwan by your firm during the
specified periods.
Taiwan
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2017
2018
2019
Beginning‐of‐period inventories
(quantity) (A)
Imports:1
Entering under Primary HTS
statistical reporting numbers:2
Quantity (B)
Entering under other HTS
statistical reporting numbers:3
Quantity (D)
Value (E)
Value (C)
U.S. shipments:
Commercial shipments:
Quantity (F)
Value (G)
Internal consumption:
Quantity (H)
4
4
Value (I)
Transfers to related firms:
Quantity (J)
4
Value (K)
Export shipments:
Quantity (L)
5
Value (M)
End‐of‐period inventories
(quantity) (N)
1
4
Please identify the foreign producers, if known: .
Primary HTS statistical report numbers include 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000,
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095.
3
Please identify the specific other HTS statistical reporting numbers which your firm classifies its imports of
CAAS: .
4
Internal consumption and transfers to related firms must be valued at fair market value. If your firm uses a
different basis for valuing these transactions in your records, please specify that basis (e.g., cost, cost plus, etc.):
. However, the data provided above in this table should be based on fair market value.
5
Identify your firm’s principal export markets: .
2
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 61
II‐21a. U.S. imports from Taiwan.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.‐‐Generally, the data reported for the
end‐of‐period inventories (i.e., lines N) should be equal to the beginning‐of‐period inventories (i.e., line
A), plus imports (i.e., lines B and D), less total shipments (i.e., lines F, H, J and L). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your
firm’s records; and also provide any likely explanations for any differences (e.g., theft, loss, damage,
record systems issues, etc.) if they exist.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation
2017
A + B + D ‐ F ‐ H ‐ J ‐ L ‐ N = should equal
zero ("0") or provide an explanation.1
2018
0
2019
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate: .
II‐21b. Channels of distribution: Taiwan.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports
from Taiwan by channel of distribution during the specified periods.
Taiwan
Calendar Years
Item
2017
2018
2019
Quantity (in short tons)
Channels of distribution:
U.S. shipments:
To distributors (O)
To converters (P)
To end users (Q)
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities reported for channels of distribution
(i.e., lines O, P and Q) in each time period equal the quantity reported for U.S. shipments (i.e., line F, H, J)
in each time period. If the calculated fields below return values other than zero (i.e., “0”), the data
reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation item
O + P + Q – F – H – J= zero
("0"), if not revise.
2017
2018
0
2019
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 62
II‐21c. U.S. shipments by product type: Taiwan.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports of
CAAS from Taiwan.
Taiwan
Quantity (in short tons), value (in $1,000)
Item
Calendar years
2017
U.S. shipments.‐‐
Non‐clad 1XXX series:
Quantity (R)
2018
2019
Value (W)
Clad or multi‐alloy:
Quantity (X)
Value (Y)
All other in‐scope
products:1
Quantity (Z)
Value (AA)
Value (S)
Non‐clad 3XXX series:
Quantity (T)
Value (U)
Non‐clad 5XXX series:
Quantity (V)
1
Describe these products:
RECONCILIATION OF U.S. SHIPMENTS.‐‐Please ensure that the quantities and values reported for US
shipments by product type (i.e., lines R through AA) equal the quantity and value reported for U.S.
shipments (i.e., lines F through K) in part "a" of this question. If the calculated fields below return values
other than zero (i.e., “0”), the data reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Year
Reconciliation
Quantity: R + T + V + X + Z – F – H – J = zero
("0"), if not revise.
Value: S + U + W + Y + AA– G – I – K = zero
("0"), if not revise.
2017
2018
2019
0
0
0
0
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 63
II‐22a. U.S. imports from Turkey.–Report your firm’s imports and your firm’s shipments and
inventories of common alloy aluminum sheet imported from Turkey by your firm during the
specified periods.
Turkey
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2017
2018
2019
Beginning‐of‐period inventories
(quantity) (A)
Imports:1
Entering under Primary HTS
statistical reporting numbers:2
Quantity (B)
Entering under other HTS
statistical reporting numbers:3
Quantity (D)
Value (E)
Value (C)
U.S. shipments:
Commercial shipments:
Quantity (F)
Value (G)
Internal consumption:
Quantity (H)
4
4
Value (I)
Transfers to related firms:
Quantity (J)
4
Value (K)
Export shipments:
Quantity (L)
5
Value (M)
End‐of‐period inventories
(quantity) (N)
1
4
Please identify the foreign producers, if known: .
Primary HTS statistical report numbers include 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000,
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095.
3
Please identify the specific other HTS statistical reporting numbers which your firm classifies its imports of
CAAS: .
4
Internal consumption and transfers to related firms must be valued at fair market value. If your firm uses a
different basis for valuing these transactions in your records, please specify that basis (e.g., cost, cost plus, etc.):
. However, the data provided above in this table should be based on fair market value.
5
Identify your firm’s principal export markets: .
2
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 64
II‐22a. U.S. imports from Turkey.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.‐‐Generally, the data reported for the
end‐of‐period inventories (i.e., lines N) should be equal to the beginning‐of‐period inventories (i.e., line
A), plus imports (i.e., lines B and D), less total shipments (i.e., lines F, H, J and L). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your
firm’s records; and also provide any likely explanations for any differences (e.g., theft, loss, damage,
record systems issues, etc.) if they exist.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation
2017
A + B + D ‐ F ‐ H ‐ J ‐ L ‐ N = should equal
zero ("0") or provide an explanation.1
2018
0
2019
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate: .
II‐22b. Channels of distribution: Turkey.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports
from Turkey by channel of distribution during the specified periods.
Turkey
Calendar Years
Item
2017
2018
2019
Quantity (in short tons)
Channels of distribution:
U.S. shipments:
To distributors (O)
To converters (P)
To end users (Q)
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities reported for channels of distribution
(i.e., lines O, P and Q) in each time period equal the quantity reported for U.S. shipments (i.e., line F, H, J)
in each time period. If the calculated fields below return values other than zero (i.e., “0”), the data
reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Years
Reconciliation item
O + P + Q – F – H – J= zero
("0"), if not revise.
2017
2018
0
2019
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 65
II‐22c. U.S. shipments by product type: Turkey.‐‐Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports of
CAAS from Turkey.
Turkey
Quantity (in short tons), value (in $1,000)
Item
Calendar years
2017
U.S. shipments.‐‐
Non‐clad 1XXX series:
Quantity (R)
2018
2019
Value (W)
Clad or multi‐alloy:
Quantity (X)
Value (Y)
All other in‐scope
products:1
Quantity (Z)
Value (AA)
Value (S)
Non‐clad 3XXX series:
Quantity (T)
Value (U)
Non‐clad 5XXX series:
Quantity (V)
1
Describe these products:
RECONCILIATION OF U.S. SHIPMENTS.‐‐Please ensure that the quantities and values reported for US
shipments by product type (i.e., lines R through AA) equal the quantity and value reported for U.S.
shipments (i.e., lines F through K) in part "a" of this question. If the calculated fields below return values
other than zero (i.e., “0”), the data reported must be revised prior to submission to the Commission.
Interact with check box to update the calculations presented here.
Calendar Year
Reconciliation
Quantity: R + T + V + X + Z – F – H – J = zero
("0"), if not revise.
Value: S + U + W + Y + AA– G – I – K = zero
("0"), if not revise.
2017
2018
2019
0
0
0
0
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 66
II‐23a. U.S. imports from all other sources.–Report your firm’s imports and your firm’s shipments and
inventories of common alloy aluminum sheet imported from all other sources by your firm during the
specified periods.
All other sources
(list sources:
)
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2017
Beginning‐of‐period inventories
(quantity) (A)
2018
2019
Entering under other HTS
statistical reporting numbers:3
Quantity (D)
Value (E)
1
Imports:
Entering under Primary HTS
statistical reporting numbers:2
Quantity (B)
Value (C)
U.S. shipments:
Commercial shipments:
Quantity (F)
Value (G)
Internal consumption:4
Quantity (H)
4
Value (I)
Transfers to related firms:
Quantity (J)
4
Value (K)
Export shipments:
Quantity (L)
5
Value (M)
End‐of‐period inventories
(quantity) (N)
1
4
Please identify the foreign producers, if known: .
Primary HTS statistical report numbers include 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000,
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095.
3
Please identify the specific other HTS statistical reporting numbers which your firm classifies its imports of
CAAS: .
4
Internal consumption and transfers to related firms must be valued at fair market value. If your firm uses a
different basis for valuing these transactions in your records, please specify that basis (e.g., cost, cost plus, etc.):
. However, the data provided above in this table should be based on fair market value.
5
Identify your firm’s principal export markets: .
2
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 67
II‐23a. Imports from all other sources.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.‐‐ Generally, the data reported for the
end‐of‐period inventories (i.e., lines N) should be equal to the beginning‐of‐period inventories (i.e., line
A), plus imports (i.e., lines B and D), less total shipments (i.e., lines F, H, J and L). Please ensure that any
differences are not due to data entry errors in completing this form, but rather actually reflect your
firm’s records; and also provide any likely explanations for any differences (e.g., theft, loss, damage,
record systems issues, etc.) if they exist.
Calendar Years
Reconciliation
2017
A + B + D ‐ F ‐ H ‐ J ‐ L ‐ N = should equal
zero ("0") or provide an explanation.1
2018
0
2019
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate: .
II‐23b. Channels of distribution: All other sources.‐‐ Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) of imports
from all other sources by channel of distribution during the specified periods.
All other sources
Calendar Years
Item
2017
2018
2019
Quantity (in short tons)
Channels of distribution:
U.S. shipments:
To distributors (O)
To converters (P)
To end users (Q)
RECONCILIATION OF CHANNELS.‐‐ Please ensure that the quantities reported for channels of distribution
(i.e., lines O, P and Q) in each time period equal the quantity reported for U.S. shipments (i.e., line F, H, J)
in each time period. If the calculated fields below return values other than zero (i.e., “0”), the data
reported must be revised prior to submission to the Commission.
Calendar Years
Reconciliation item
O + P + Q – F – H – J= zero
("0"), if not revise.
2017
2018
0
2019
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 68
II‐23c. U.S. shipments by product type: All other sources.‐‐Report your firm’s U.S. shipments (i.e.
inclusive of commercial U.S. shipments, internal consumption, and transfers to related firms) of
imports of CAAS from all other sources.
All Other Sources
Quantity (in short tons), value (in $1,000)
Item
Calendar years
2017
U.S. shipments.‐‐
Non‐clad 1XXX series:
Quantity (R)
2018
2019
Value (W)
Clad or multi‐alloy:
Quantity (X)
Value (Y)
All other in‐scope
products:1
Quantity (Z)
Value (AA)
0
0
0
0
0
0
Value (S)
Non‐clad 3XXX series:
Quantity (T)
Value (U)
Non‐clad 5XXX series:
Quantity (V)
U.S. shipments:
Quantity
Value
1
Describe these products:
RECONCILIATION OF U.S. SHIPMENTS.‐‐Please ensure that the quantities and values reported for US
shipments by product type (i.e., lines R through AA) equal the quantity and value reported for U.S.
shipments (i.e., lines F through K) in part "a" of this question. If the calculated fields below return values
other than zero (i.e., “0”), the data reported must be revised prior to submission to the Commission.
Calendar Year
Reconciliation
2017
2018
2019
Quantity: R + T + V + X + Z – F – H – J = zero
("0"), if not revise.
0
0
0
Value: S + U + W + Y + AA– G – I – K = zero
("0"), if not revise.
0
0
0
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
II‐7.
Page 69
Transfers to related firms.‐‐If your firm reported transfers to related firms in any of the data
tables in part II, please identify the firm(s) and indicate the nature of the relationship between
your firm and the related firms (e.g., joint venture, wholly owned subsidiary) and whether the
transfers were priced at market value or by a non‐market formula.
II‐8.
Other explanations.‐‐If your firm would like to further explain a response to a question in Part II
for which a narrative response box was not provided, please note the question number and the
explanation in the space provided below. Please also use this space to highlight any issues your
firm had in providing the data in this section, including but not limited to technical issues with
the MS Word questionnaire.
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 70
PART III.‐‐PRICING AND MARKET FACTORS
Further information on this part of the questionnaire can be obtained from Natalia King (202‐205‐2049,
[email protected]).
III‐1. Contact information.‐‐Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in part III.
Name
Title
Email
Telephone
PRICE DATA
III‐2. This question requests quarterly quantity and value data for your firm’s commercial shipments
to unrelated U.S. customers since January 1, 2017 of the following products your firm imported
from Brazil, Brazil, Croatia, Egypt, Germany, Greece, India, Indonesia, Italy, Korea, Oman,
Romania, Serbia, Slovenia, South Africa, Spain, Taiwan, or Turkey:
Product 1.‐‐ Alloy 3003, H‐14 temper, 0.125” thick, 48” wide
Product 2.‐‐ Alloy 5052, H‐32 temper, 0.125” thick, 48” wide
Product 3.‐‐ Alloy 3105, H‐26 temper, 0.016” thick, 24” wide
Product 4.‐‐ Alloy 3003, H‐14 temper, 0.063” thick, 48” wide
Please note that values should be f.o.b., U.S. point of shipment and should not include U.S.‐inland
transportation costs. Values should reflect the final net amount paid to your firm (i.e., should be net
of all deductions for discounts or rebates).
During January 2017 ‐ December 2019, did your firm import from Brazil, Brazil, Croatia, Egypt,
Germany, Greece, India, Indonesia, Italy, Korea, Oman, Romania, Serbia, Slovenia, South Africa,
Spain, Taiwan, and/or Turkey and sell to unrelated U.S. customers any of the above listed
products (or any products that were competitive with these products)?
Yes.‐‐Please complete the following pricing data tables as appropriate.
No.‐‐Skip to question III‐3.
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 71
III‐2a. Price data ‐ Brazil.‐‐Report below the quarterly price data1 for pricing products2 imported from
Brazil and sold by your firm.
Brazil
Report data in pounds (not short tons) and actual dollars (not 1,000s).
Period of shipment
2017:
January‐March
April‐June
July‐September
October‐
December
2018:
January‐March
April‐June
July‐September
October‐
December
2019:
January‐March
April‐June
July‐September
October‐
December
(Quantity in pounds, value in dollars)
Product 1
Product 2
Product 3
Quantity
Value
Quantity
Value
Quantity
Value
Product 4
Quantity
Value
1 Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your
firm’s U.S. point of shipment.
2 Pricing product definitions are provided on the first page of Part III.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a
description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 72
III‐2b. Price data ‐ Brazil.‐‐Report below the quarterly price data1 for pricing products2 imported from
Brazil and sold by your firm.
Brazil
Report data in pounds (not short tons) and actual dollars (not 1,000s).
Period of shipment
2017:
January‐March
April‐June
July‐September
October‐
December
2018:
January‐March
April‐June
July‐September
October‐
December
2019:
January‐March
April‐June
July‐September
October‐
December
(Quantity in pounds, value in dollars)
Product 1
Product 2
Product 3
Quantity
Value
Quantity
Value
Quantity
Value
Product 4
Quantity
Value
1 Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your
firm’s U.S. point of shipment.
2 Pricing product definitions are provided on the first page of Part III.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a
description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 73
III‐2c. Price data ‐ Croatia.‐‐Report below the quarterly price data1 for pricing products2 imported from
Croatia and sold by your firm.
Croatia
Report data in pounds (not short tons) and actual dollars (not 1,000s).
Period of shipment
2017:
January‐March
April‐June
July‐September
October‐
December
2018:
January‐March
April‐June
July‐September
October‐
December
2019:
January‐March
April‐June
July‐September
October‐
December
(Quantity in pounds, value in dollars)
Product 1
Product 2
Product 3
Quantity
Value
Quantity
Value
Quantity
Value
Product 4
Quantity
Value
1 Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your
firm’s U.S. point of shipment.
2 Pricing product definitions are provided on the first page of Part III.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a
description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 74
III‐2d. Price data ‐ Egypt.‐‐Report below the quarterly price data1 for pricing products2 imported from
Egypt and sold by your firm.
Egypt
Report data in pounds (not short tons) and actual dollars (not 1,000s).
Period of shipment
2017:
January‐March
April‐June
July‐September
October‐
December
2018:
January‐March
April‐June
July‐September
October‐
December
2019:
January‐March
April‐June
July‐September
October‐
December
(Quantity in pounds, value in dollars)
Product 1
Product 2
Product 3
Quantity
Value
Quantity
Value
Quantity
Value
Product 4
Quantity
Value
1 Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your
firm’s U.S. point of shipment.
2 Pricing product definitions are provided on the first page of Part III.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a
description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 75
III‐2e. Price data ‐ Germany.‐‐Report below the quarterly price data1 for pricing products2 imported
from Germany and sold by your firm.
Germany
Report data in pounds (not short tons) and actual dollars (not 1,000s).
Period of shipment
2017:
January‐March
April‐June
July‐September
October‐
December
2018:
January‐March
April‐June
July‐September
October‐
December
2019:
January‐March
April‐June
July‐September
October‐
December
(Quantity in pounds, value in dollars)
Product 1
Product 2
Product 3
Quantity
Value
Quantity
Value
Quantity
Value
Product 4
Quantity
Value
1 Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your
firm’s U.S. point of shipment.
2 Pricing product definitions are provided on the first page of Part III.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a
description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 76
III‐2f. Price data ‐ Greece.‐‐Report below the quarterly price data1 for pricing products2 imported from
Greece and sold by your firm.
Greece
Report data in pounds (not short tons) and actual dollars (not 1,000s).
Period of shipment
2017:
January‐March
April‐June
July‐September
October‐
December
2018:
January‐March
April‐June
July‐September
October‐
December
2019:
January‐March
April‐June
July‐September
October‐
December
(Quantity in pounds, value in dollars)
Product 1
Product 2
Product 3
Quantity
Value
Quantity
Value
Quantity
Value
Product 4
Quantity
Value
1 Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your
firm’s U.S. point of shipment.
2 Pricing product definitions are provided on the first page of Part III.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a
description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 77
III‐2g. Price data ‐India.‐‐Report below the quarterly price data1 for pricing products2 imported from
India and sold by your firm.
India
Report data in pounds (not short tons) and actual dollars (not 1,000s).
Period of shipment
2017:
January‐March
April‐June
July‐September
October‐
December
2018:
January‐March
April‐June
July‐September
October‐
December
2019:
January‐March
April‐June
July‐September
October‐
December
(Quantity in pounds, value in dollars)
Product 1
Product 2
Product 3
Quantity
Value
Quantity
Value
Quantity
Value
Product 4
Quantity
Value
1 Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your
firm’s U.S. point of shipment.
2 Pricing product definitions are provided on the first page of Part III.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a
description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 78
III‐2h. Price data ‐ Indonesia.‐‐Report below the quarterly price data1 for pricing products2 imported
from Indonesia and sold by your firm.
Indonesia
Report data in pounds (not short tons) and actual dollars (not 1,000s).
Period of shipment
2017:
January‐March
April‐June
July‐September
October‐
December
2018:
January‐March
April‐June
July‐September
October‐
December
2019:
January‐March
April‐June
July‐September
October‐
December
(Quantity in pounds, value in dollars)
Product 1
Product 2
Product 3
Quantity
Value
Quantity
Value
Quantity
Value
Product 4
Quantity
Value
1 Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your
firm’s U.S. point of shipment.
2 Pricing product definitions are provided on the first page of Part III.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a
description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 79
III‐2i. Price data ‐ Italy.‐‐Report below the quarterly price data1 for pricing products2 imported from
Italy and sold by your firm.
Italy
Report data in pounds (not short tons) and actual dollars (not 1,000s).
Period of shipment
2017:
January‐March
April‐June
July‐September
October‐
December
2018:
January‐March
April‐June
July‐September
October‐
December
2019:
January‐March
April‐June
July‐September
October‐
December
(Quantity in pounds, value in dollars)
Product 1
Product 2
Product 3
Quantity
Value
Quantity
Value
Quantity
Value
Product 4
Quantity
Value
1 Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your
firm’s U.S. point of shipment.
2 Pricing product definitions are provided on the first page of Part III.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a
description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 80
III‐2j. Price data ‐ Korea.‐‐Report below the quarterly price data1 for pricing products2 imported from
Korea and sold by your firm.
Korea
Report data in pounds (not short tons) and actual dollars (not 1,000s).
Period of shipment
2017:
January‐March
April‐June
July‐September
October‐
December
2018:
January‐March
April‐June
July‐September
October‐
December
2019:
January‐March
April‐June
July‐September
October‐
December
(Quantity in pounds, value in dollars)
Product 1
Product 2
Product 3
Quantity
Value
Quantity
Value
Quantity
Value
Product 4
Quantity
Value
1 Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your
firm’s U.S. point of shipment.
2 Pricing product definitions are provided on the first page of Part III.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a
description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 81
III‐2k. Price data ‐ Oman.‐‐Report below the quarterly price data1 for pricing products2 imported from
Oman and sold by your firm.
Oman
Report data in pounds (not short tons) and actual dollars (not 1,000s).
Period of shipment
2017:
January‐March
April‐June
July‐September
October‐
December
2018:
January‐March
April‐June
July‐September
October‐
December
2019:
January‐March
April‐June
July‐September
October‐
December
(Quantity in pounds, value in dollars)
Product 1
Product 2
Product 3
Quantity
Value
Quantity
Value
Quantity
Value
Product 4
Quantity
Value
1 Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your
firm’s U.S. point of shipment.
2 Pricing product definitions are provided on the first page of Part III.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a
description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 82
III‐2l. Price data ‐ Romania.‐‐Report below the quarterly price data1 for pricing products2 imported
from Romania and sold by your firm.
Romania
Report data in pounds (not short tons) and actual dollars (not 1,000s).
Period of shipment
2017:
January‐March
April‐June
July‐September
October‐
December
2018:
January‐March
April‐June
July‐September
October‐
December
2019:
January‐March
April‐June
July‐September
October‐
December
(Quantity in pounds, value in dollars)
Product 1
Product 2
Product 3
Quantity
Value
Quantity
Value
Quantity
Value
Product 4
Quantity
Value
1 Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your
firm’s U.S. point of shipment.
2 Pricing product definitions are provided on the first page of Part III.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a
description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 83
III‐2m. Price data ‐ Serbia.‐‐Report below the quarterly price data1 for pricing products2 imported from
Serbia and sold by your firm.
Serbia
Report data in pounds (not short tons) and actual dollars (not 1,000s).
Period of shipment
2017:
January‐March
April‐June
July‐September
October‐
December
2018:
January‐March
April‐June
July‐September
October‐
December
2019:
January‐March
April‐June
July‐September
October‐
December
(Quantity in pounds, value in dollars)
Product 1
Product 2
Product 3
Quantity
Value
Quantity
Value
Quantity
Value
Product 4
Quantity
Value
1 Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your
firm’s U.S. point of shipment.
2 Pricing product definitions are provided on the first page of Part III.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a
description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 84
III‐2n. Price data ‐ Slovenia.‐‐Report below the quarterly price data1 for pricing products2 imported
from Slovenia and sold by your firm.
Slovenia
Report data in pounds (not short tons) and actual dollars (not 1,000s).
Period of shipment
2017:
January‐March
April‐June
July‐September
October‐
December
2018:
January‐March
April‐June
July‐September
October‐
December
2019:
January‐March
April‐June
July‐September
October‐
December
(Quantity in pounds, value in dollars)
Product 1
Product 2
Product 3
Quantity
Value
Quantity
Value
Quantity
Value
Product 4
Quantity
Value
1 Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your
firm’s U.S. point of shipment.
2 Pricing product definitions are provided on the first page of Part III.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a
description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 85
III‐2o. Price data ‐ South Africa.‐‐Report below the quarterly price data1 for pricing products2 imported
from South Africa and sold by your firm.
South Africa
Report data in pounds (not short tons) and actual dollars (not 1,000s).
Period of shipment
2017:
January‐March
April‐June
July‐September
October‐
December
2018:
January‐March
April‐June
July‐September
October‐
December
2019:
January‐March
April‐June
July‐September
October‐
December
(Quantity in pounds, value in dollars)
Product 1
Product 2
Product 3
Quantity
Value
Quantity
Value
Quantity
Value
Product 4
Quantity
Value
1 Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your
firm’s U.S. point of shipment.
2 Pricing product definitions are provided on the first page of Part III.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a
description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 86
III‐2p. Price data ‐ Spain.‐‐Report below the quarterly price data1 for pricing products2 imported from
Spain and sold by your firm.
Spain
Report data in pounds (not short tons) and actual dollars (not 1,000s).
Period of shipment
2017:
January‐March
April‐June
July‐September
October‐
December
2018:
January‐March
April‐June
July‐September
October‐
December
2019:
January‐March
April‐June
July‐September
October‐
December
(Quantity in pounds, value in dollars)
Product 1
Product 2
Product 3
Quantity
Value
Quantity
Value
Quantity
Value
Product 4
Quantity
Value
1 Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your
firm’s U.S. point of shipment.
2 Pricing product definitions are provided on the first page of Part III.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a
description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 87
III‐2q. Price data ‐ Taiwan.‐‐Report below the quarterly price data1 for pricing products2 imported from
Taiwan and sold by your firm.
Taiwan
Report data in pounds (not short tons) and actual dollars (not 1,000s).
Period of shipment
2017:
January‐March
April‐June
July‐September
October‐
December
2018:
January‐March
April‐June
July‐September
October‐
December
2019:
January‐March
April‐June
July‐September
October‐
December
(Quantity in pounds, value in dollars)
Product 1
Product 2
Product 3
Quantity
Value
Quantity
Value
Quantity
Value
Product 4
Quantity
Value
1 Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your
firm’s U.S. point of shipment.
2 Pricing product definitions are provided on the first page of Part III.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a
description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 88
III‐2r. Price data ‐ Turkey.‐‐Report below the quarterly price data1 for pricing products2 imported from
Turkey and sold by your firm.
Turkey
Report data in pounds (not short tons) and actual dollars (not 1,000s).
Period of shipment
2017:
January‐March
April‐June
July‐September
October‐
December
2018:
January‐March
April‐June
July‐September
October‐
December
2019:
January‐March
April‐June
July‐September
October‐
December
(Quantity in pounds, value in dollars)
Product 1
Product 2
Product 3
Quantity
Value
Quantity
Value
Quantity
Value
Product 4
Quantity
Value
1 Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your
firm’s U.S. point of shipment.
2 Pricing product definitions are provided on the first page of Part III.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a
description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 89
III‐2s. Price data checklist.‐‐Please check that the pricing data in question III‐2(a) has been correctly
reported.
Are the price data reported above:
√ if Yes
In actual dollars (not $1,000) and pounds (not short tons)?
F.o.b. U.S. point of shipment (i.e., does not include U.S. transport costs)?
Net of all discounts and rebates?
Have returns credited to the quarter in which the sale occurred?
Less than reported commercial shipments in part II in each year?
III‐2t. Pricing data methodology.‐‐Please describe the method and the kinds of documents/records
that were used to compile your price data.
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records used in
the preparation of the price data, as Commission staff may contact your firm regarding questions on the
price data. The Commission may also request that your company submit copies of the supporting
documents/records (such as sales journal, invoices, etc.) used to compile these data.
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
III‐3.
Price setting.‐‐How does your firm determine the prices that it charges for sales of CAAS (check
all that apply)? If your firm issues price lists, please submit sample pages of a recent list.
Transaction
by
transaction
Contracts
III‐4.
Set
price
lists
Other
If other, describe
Discount policy.‐‐Please indicate and describe your firm’s discount policies (check all that apply).
Quantity
discounts
Annual
total
volume
discounts
III‐5.
Page 90
No
discount
policy
Other
Describe
Pricing terms.‐‐On what basis are your firm’s prices of imported CAAS from Brazil, Brazil,
Croatia, Egypt, Germany, Greece, India, Indonesia, Italy, Korea, Oman, Romania, Serbia,
Slovenia, South Africa, Spain, Taiwan, or Turkey usually quoted (check one)?
Delivered
F.o.b.
III‐6.
If f.o.b., specify point
Contract versus spot.‐‐Approximately what share of your firm’s sales of common alloy
aluminum sheet imported from Brazil, Brazil, Croatia, Egypt, Germany, Greece, India, Indonesia,
Italy, Korea, Oman, Romania, Serbia, Slovenia, South Africa, Spain, Taiwan, or Turkey in 2019
was on a (1) short‐term contract basis, (2) annual contract basis, (3) long‐term contract basis,
and (4) spot sales basis?
Item
Share of 2019
sales
Short‐term
contracts
(multiple
deliveries for
less than 12
months)
%
Type of sale
Long‐term
Annual
contracts
contracts
(multiple
(multiple
deliveries for
deliveries for 12
more than 12
months)
months)
%
%
Spot sales
(for a single
delivery)
%
Total
(should
sum to
100.0%)
0.0
%
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
III‐7.
Page 91
Contract provisions.‐‐Please fill out the table regarding your firm’s typical sales contracts for
CAAS imported from Brazil, Brazil, Croatia, Egypt, Germany, Greece, India, Indonesia, Italy,
Korea, Oman, Romania, Serbia, Slovenia, South Africa, Spain, Taiwan, or Turkey (or check “not
applicable” if your firm does not sell on a short‐term, annual and/or long‐term contract basis).
Short‐term contracts Annual contracts
(multiple
(multiple deliveries
deliveries for 12
for less than 12
months)
months)
Long‐term contracts
(multiple deliveries
for more than 12
months)
Typical sales
contract provisions
Item
Average contract
duration
No. of
days
Price renegotiation
(during contract
period)
Yes
No
Quantity
Price
Both
Yes
No
Fixed quantity
and/or price
Indexed to raw
material costs1
Not applicable
365
1
Please identify the indexes used: .
III‐8.
Lead times.‐‐What is your firm’s share of sales of CAAS imported from Brazil, Brazil, Croatia,
Egypt, Germany, Greece, India, Indonesia, Italy, Korea, Oman, Romania, Serbia, Slovenia, South
Africa, Spain, Taiwan, or Turkey from inventory and produced to order and what is the typical
lead time between a customer’s order and the date of delivery for your firm’s sales of common
alloy aluminum sheet?
Lead time
(Average number
Source
Share of 2019 sales
of days)
From your firm’s U.S. inventory
%
From foreign manufacturers’ inventory
%
Produced to order
%
Total (should sum to 100.0%)
0.0 %
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
III‐9.
Page 92
Shipping information.—
(a)
(b)
(c)
Who generally arranges the transportation to your firm’s customers’ locations?
Your firm Purchaser (check one)
When your firm sells CAAS imported from Brazil, Brazil, Croatia, Egypt, Germany,
Greece, India, Indonesia, Italy, Korea, Oman, Romania, Serbia, Slovenia, South Africa,
Spain, Taiwan, or Turkey, from where is it shipped?
Point of importation Storage facility (check one)
Indicate the approximate percentage of your firm’s sales of common alloy aluminum
sheet imported from Brazil, Brazil, Croatia, Egypt, Germany, Greece, India, Indonesia,
Italy, Korea, Oman, Romania, Serbia, Slovenia, South Africa, Spain, Taiwan, or Turkey
that are delivered the following distances from your firm’s U.S. point of shipment.
Distance from your firm’s U.S. point of shipment
Within 100 miles
%
101 to 1,000 miles
%
Over 1,000 miles
%
Total (should sum to 100.0%)
Share
0.0 %
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 93
Pacific Coast
Brazil
Croatia
Egypt
Germany
Greece
India
Indonesia
Italy
Korea
Oman
Romania
Serbia
Slovenia
South
Africa
Spain
Taiwan
Turkey
Other
Southeast
Midwest
Brazil
Northeast
Mountains
Central Southwest
III‐10. Geographical shipments.‐‐In which U.S. geographic market area(s) has your firm sold CAAS
imported from subject countries since January 1, 2017 (check all that apply)?
The geographic market areas above are defined as:
Northeast.–CT, ME, MA, NH, NJ, NY, PA, RI, and VT.
Midwest.–IL, IN, IA, KS, MI, MN, MO, NE, ND, OH, SD, and WI.
Southeast.–AL, DE, DC, FL, GA, KY, MD, MS, NC, SC, TN, VA, and WV.
Central Southwest.–AR, LA, OK, and TX.
Mountains.–AZ, CO, ID, MT, NV, NM, UT, and WY.
Pacific Coast.–CA, OR, and WA.
Other.–All other markets in the United States not previously listed, including AK, HI, PR, and VI.
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 94
III‐11. Inland transportation costs.—What is the approximate percentage of the cost of CAAS
imported from Brazil, Brazil, Croatia, Egypt, Germany, Greece, India, Indonesia, Italy, Korea,
Oman, Romania, Serbia, Slovenia, South Africa, Spain, Taiwan, or Turkey that is accounted for by
U.S. inland transportation costs? percent.
III‐12. End uses.‐‐List the end uses of the CAAS that your firm imports. For each end‐use product, what
percentage of the total cost is accounted for by CAAS and other inputs?
Share of total cost of end‐use product
accounted for by
Total
(should sum to
100.0% across)
CAAS
Other inputs
End‐use product
%
%
0.0 %
%
%
0.0 %
%
%
0.0 %
III‐13. Substitutes.‐‐Can other products be substituted for CAAS?
No
Yes‐‐Please fill out the table.
End use in which this
substitute is used
Substitute
Have changes in the price of this substitute
affected the price for CAAS?
No Yes
Explanation
1.
2.
3.
III‐14. Demand trends.‐‐Indicate how demand within the United States and outside of the United
States (if known) for CAAS has changed since January 1, 2017. Explain any trends and describe
the principal factors that have affected these changes in demand.
Overall
No
Overall Fluctuate with
increase change decrease no clear trend
Market
Explanation and factors
Within the United States
Outside the United States
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 95
III‐15. Product changes.‐‐Have there been any significant changes in the product range, product mix or
marketing of CAAS since January 1, 2017?
No
Yes
If yes, please describe.
III‐16. Conditions of competition.—
(a) Is the CAAS market subject to business cycles (other than general economy‐wide conditions)
and/or other conditions of competition distinctive to CAAS?
Check all that apply.
Please describe.
No
Skip to question III‐16.
Yes‐Business cycles (e.g.
seasonal business)
Yes‐Other distinctive
conditions of competition
(b) If yes, have there been any changes in the business cycles or conditions of competition for
CAAS since January 1, 2017?
No
Yes
If yes, describe.
III‐17. Supply constraints.‐‐Has your firm refused, declined, or been unable to supply CAAS since
January 1, 2017 (examples include placing customers on allocation or “controlled order entry,”
declining to accept new customers or renew existing customers, delivering less than the
quantity promised, being unable to meet timely shipment commitments, etc.)?
No
Yes
If yes, please describe.
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 96
III‐18. Raw materials.—
(a) How have CAAS raw material prices changed since January 1, 2017?
Fluctuate
Overall
No
Overall
with no
Explain, noting how raw material price changes
increase change decrease clear trend have affected your firm’s selling prices for CAAS.
(b) Do changes in raw material costs affect your firm’s price negotiations with your common
CAAS purchasers?
No
Yes
If yes, please explain.
(c) Are your firm’s sales of CAAS indexed to raw material costs or indices, including, but not
limited to, indices such as the London Metals Exchange or the Midwest Premium?
No
Yes
If yes, please specify the indices, how they are indexed (e.g., to the last
month’s average value), and how those indices may have changed since
January 1, 2017.
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 97
III‐19. Impact of the section 232 tariffs.‐‐ Did the imposition of tariffs on imported steel/aluminum
products under section 232 have an impact on the CAAS market in the United States?
Yes— Please indicate the
impact in the table below.
No
Don’t know
Factor
Fluctuate Explain, noting how the imposition
with no of tariffs under section 232 affected
each factor of the CAAS market in
clear
Overall
No
Overall
the United States.
trend
increase change decrease
Supply of U.S.‐
produced CAAS
Supply of imported
CAAS
Prices for CAAS
Overall U.S. demand
for CAAS
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 98
III‐20. Interchangeability.‐‐Is common alloy aluminum sheet produced in the United States and in
other countries interchangeable (i.e., can they physically be used in the same applications)?
Please indicate A, F, S, N, or 0 in the table below:
A = the products from a specified country‐pair are always interchangeable
F = the products are frequently interchangeable
S = the products are sometimes interchangeable
N = the products are never interchangeable
0 = no familiarity with products from a specified country‐pair
Other countries
Turkey
Taiwan
Spain
South Africa
Slovenia
Serbia
Romania
Oman
Korea
Italy
Indonesia
India
Greece
Germany
Egypt
Brazil
Brazil
United States
Croatia
Country‐pair
Brazil
Brazil
Croatia
Egypt
Germany
Greece
India
Indonesia
Italy
Korea
Oman
Romania
Serbia
Slovenia
South Africa
Spain
Taiwan
Turkey
For any country‐pair producing CAAS that is sometimes or never interchangeable, identify the country‐pair and explain
the factors that limit or preclude interchangeable use:
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 99
III‐21. Factors other than price.‐‐Are differences other than price (e.g., quality, availability,
transportation network, product range, technical support, etc.) between common alloy
aluminum sheet produced in the United States and in other countries a significant factor in your
firm’s sales of the products?
Please indicate A, F, S, N, or 0 in the table below:
A = such differences are always significant
F = such differences are frequently significant
S = such differences are sometimes significant
N = such differences are never significant
0 = no familiarity with products from a specified country‐pair
Other countries
Turkey
Taiwan
Spain
South Africa
Slovenia
Serbia
Romania
Oman
Korea
Italy
Indonesia
India
Greece
Germany
Egypt
Brazil
Brazil
United States
Croatia
Country‐pair
Brazil
Brazil
Croatia
Egypt
Germany
Greece
India
Indonesia
Italy
Korea
Oman
Romania
Serbia
Slovenia
South Africa
Spain
Taiwan
Turkey
For any country‐pair for which factors other than price always or frequently are a significant factor in your firm’s sales
of CAAS, identify the country‐pair and report the advantages or disadvantages imparted by such factors:
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 100
III‐22. Customer identification.‐‐List the names and contact information for your firm’s 10 largest U.S.
customers for CAAS since January 1, 2017. Indicate the share of the quantity of your firm’s total
shipments of common alloy aluminum sheet that each of these customers accounted for in
2019.
Customer’s name
Contact person
Email
Telephone
City
State
Share
of
2019
sales
(%)
1
2
3
4
5
6
7
8
9
10
III‐23. Other explanations.‐‐If your firm would like to further explain a response to a question in Part III
for which a narrative response box was not provided, please note the question number and the
explanation in the space provided below. Please also use this space to highlight any issues your
firm had in providing the data in this section, including but not limited to technical issues with
the MS Word questionnaire.
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 101
Correcting Valid number error messages.‐‐If you are completing a Commission
questionnaire in a country that uses periods (“.”) to delineate multiples of 1000 (e.g., one million would
appear as $1.000.000 instead of as $1,000,000), you may be unable to enter in numbers greater than
999 in numeric form fields. This issues stem from your computer number formatting setting (e.g., not
the MS Word document itself, but the computer from which you are opening up the document). In the
United States commas (,) delineate multiples of 1000 and periods (.) delineate fractions less than one.
Many EU countries use the reverse where multiples of 1000 are delineated with periods (.) and
fractions less than one are delineated with commas (,). The U.S. International Trade Commission’s
questionnaires are set‐up in the United States with the U.S. number formatting. When this formatting
interacts with a computer set to EU number formatting, we believe this may cause this issue.
The solution to this data entry issue is to temporarily change your operating system’s number
formatting to be consistent with the U.S. number formatting system while you complete the
questionnaire.
To temporarily change your computer’s number settings to U.S. settings, please do the following (for
Microsoft Windows Operating system):
START
Control Panel
Region and Language (under Clock, Language, and Region category)
Format tab
Change the Format from your existing one (e.g. “Italian (Italy)”) to “English (United States)” (see
screen shots below)
When you do this the number “twelve million dollars and thirty five cents” would change from
$12.000.000,35 (Italy format) to $12,000,000.35 (U.S. format), and then there will be no conflict with
the questionnaire. When you finish reporting the data then you can close the questionnaire and switch
back to Italy settings.
Business Proprietary
U.S. Importers’ Questionnaire ‐ Common Alloy Aluminum Sheet (Preliminary)
Page 102
HOW TO FILE YOUR QUESTIONNAIRE RESPONSE
This questionnaire is available as a “fillable” form in MS Word format on the
Commission’s website at:
https://www.usitc.gov/investigations/701731/2020/common_alloy_aluminum_sheet_B
razil_brazil_croatia/preliminary.htm
Please do not attempt to modify the format or permissions of the questionnaire
document. Please submit the completed questionnaire using one of the methods noted
below. If your firm is unable to complete the MS Word questionnaire or cannot use one
of the electronic methods of submission, please contact the Commission for further
instructions.
• Upload via Secure Drop Box.—Upload the MS Word questionnaire along with a scanned copy of the
signed certification page (page 1) through the Commission’s secure upload facility:
Web address: https://dropbox.usitc.gov/oinv/
Pin: SHEET
• E‐mail.—E‐mail the MS Word questionnaire to [email protected]; include a scanned copy of
the signed certification page (page 1). Submitters are strongly encouraged to encrypt nonpublic
documents that are electronically transmitted to the Commission to protect your sensitive information
from unauthorized disclosure. The USITC secure drop‐box system and the Electronic Document
Information System (EDIS) use Federal Information Processing Standards (FIPS) 140‐2 cryptographic
algorithms to encrypt data in transit. Submitting your nonpublic documents by a means that does not
use these encryption algorithms (such as by email) may subject your firm’s nonpublic information to
unauthorized disclosure during transmission. If you choose a non‐encrypted method of electronic
transmission, the Commission warns you that the risk of such possible unauthorized disclosure is
assumed by you and not by the Commission.
If your firm did not import this product, please fill out page 1, print, sign, and submit a scanned copy to
the Commission.
Parties to this proceeding.—If your firm is a party to this proceeding, it is required to serve a copy of the
completed questionnaire on parties to the proceeding that are subject to administrative protective
order (see 19 CFR § 207.7). A list of such parties may be obtained from the Commission’s Secretary (202‐
205‐1803). A certificate of service must accompany the completed questionnaire you submit (see 19 CFR
§ 207.7). Service of the questionnaire must be made in paper form.
| File Type | application/pdf |
| File Title | Microsoft Word - US importer questionnaire--CAAS |
| Author | stamen.borisson |
| File Modified | 2020-03-10 |
| File Created | 2020-03-10 |