Application for Reference and
Equivalent Method Determination (Renewal)
Extension without change of a currently approved collection
No
Regular
06/30/2021
Requested
Previously Approved
36 Months From Approved
06/30/2021
22
22
7,492
7,492
152,152
140,121
To determine compliance with the
NAAQS, State air monitoring agencies are required to use, in their
air quality monitoring networks, air monitoring methods that have
been formally designated by the EPA as either reference or
equivalent methods under EPA regulations at 40 CFR part 53. A
manufacturer or seller of an air monitoring method (e.g. an air
monitoring sampler or analyzer) that seeks to obtain such EPA
designation of one of its products must carry out prescribed tests
of the method. The test results and other information must then be
submitted to the EPA in the form of an application for a reference
or equivalent method determination in accordance with 40 CFR part
53. The EPA uses this information, under the provisions of Part 53,
to determine whether the particular method should be designated as
either a reference or equivalent method. After a method is
designated, the applicant must also maintain records of the names
and mailing addresses of all ultimate purchasers of all analyzers
or samplers sold as designated methods under the method
designation. If the method designated is a method for fine
particulate matter (PM2.5) and coarse particulate matter
(PM10-2.5), the applicant must also submit a checklist signed by an
ISO-certified auditor to indicate that the samplers or analyzers
sold as part of the designated method are manufactured in an ISO
9001-registered facility. Also, an applicant must submit a minor
application to seek approval for any proposed modifications to
previously designated methods.
On behalf of this Federal agency, I certify that
the collection of information encompassed by this request complies
with 5 CFR 1320.9 and the related provisions of 5 CFR
1320.8(b)(3).
The following is a summary of the topics, regarding
the proposed collection of information, that the certification
covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a
benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control
number;
If you are unable to certify compliance with any of
these provisions, identify the item by leaving the box unchecked
and explain the reason in the Supporting Statement.