0694-0139 Exclusion Request Steel

OMB Control Number: 0694-0139

Expiration Date: 3/31/2019

Request for Exclusion from Remedies: Section 232 National Security Investigation of Steel Imports

Exclusion Request Requirements: Only individuals or organizations operating in the United States that use steel products (e.g. flat, long, semi-finished, pipe and tube, and stainless) in business activities (e.g., construction, manufacturing, supplying steel product to users) in the United States may submit an Exclusion Request. For an Exclusion Request to be considered, the Exclusion Requester must provide factual information on 1) the single type of steel product it requires using a 10-digit HTSUS code, including its specific dimension; 2) the quantity of product required (stated in kilograms) under a one-year exclusion; 3) a full description of the properties of the steel product it seeks to import, including chemical composition, dimensions, strength, toughness, ductility, magnetic permeability, surface finish, coatings, and other relevant data. Exclusion Requests must be submitted using this Excel-based document. Paper submissions will not be accepted. A separate Exclusion Request must be submitted on each distinct type and dimension of steel product to be imported. All applicable question blocks in the form must be completed for the Exclusion Request to be accepted. Exclusion Requests will be denied if the applicant: 1) does not sufficiently address the specified reporting requirements; 2) cites the improper HTSUS code, or 3) provides incorrect product descriptions. Organizations electing to attach supporting documents must provide these documents in PDF format and it must not exceed 25 pages. All information submitted in the Exclusion Request is subject to public disclosure. Do not provide sensitive Personally Identifiable Information. Organizations should upload their completed Exclusion Request pertaining to a steel product to www.regulations.gov under Docket Number BIS-2018-0006. An Exclusion Request may be submitted at any time. Processing of an Exclusion Request will take approximately 90 business days. Notification of granted Exclusions will be posted on www.regulations.gov. For questions related directly to completing this form, contact BIS via email ([email protected]) or telephone (202-482-5642).

1.a

Identify the class of steel product for which the Exclusion is sought:

10-Digit Harmonized Tariff Schedule Code of the United States (HTSUS) for the single steel product covered by this request: (See https://www.usitc.gov/)

1.b

Requesting Organization Information

Importer of Record for Organization Requesting an Exclusion

Full Organization Legal Name

Full Organization Legal Name

Street Address

Street Address

City

City

State

State

Zip Code

Zip Code

Headquarters Country

Headquarters Country

Point of Contact Name

Point of Contact - Representative Name

Phone Number

Phone Number

E-mail Address

E-mail Address

Web Site Address

Web Site Address

Parent Company of Requesting Organization

Requester's Authorized Representative/Agent (If applicable)

Full Organization Legal Name

Requester Point of Contact Name

Street Address

Point-of-Contact Organization

City

Country Location

State/Province

Phone Number

Zip Code/Postal Code

E-mail Address

Headquarters Country

Web Site Address

Web Site Address

Other Information

1.c

Does the parent organization hold ownership in (partially or completely), or is it otherwise engaged as a: Steel Manufacturer; Steel Distributor; Steel Exporter or, Steel Importer? If "Yes" identify the activity.

If "Yes" - Identify the organization

Identify the country where the organization is headquartered

Comments:

1.d

Identify the primary type of steel activity of the Exclusion Requester:

Total Requested Annual Exclusion Quantity in Kilograms (1 metric ton = 1,000 kilograms)

Comments:

Continued on Next Page

Request for Exclusion from Remedies: Section 232 National Security Investigation of Steel Imports - Continued

2.a

Average annual consumption for years 2015-2017 of the steel product that is subject of this Exclusion Request - Kilograms

2.b

Explain why your organization requires an Exclusion using 1) the drop-down box to the right and 2) by providing written comments in the space provided below.

Comments:

2.c

Identify the percentage of total steel product covered under this Exclusion Request not available from steel manufacturers in the United States:

2.d

Estimate the number of days required to take delivery of the steel product covered by this Exclusion Request, from the time the purchase order is issued by your organization:

2.e

Estimate the number of days required to manufacture the steel product covered by this Exclusion Request, from the time a binding purchase order is executed:

2.f.

Estimate the number of days required to ship the steel product covered under this Exclusion Request, from the foreign port of departure to the Exclusion Requester's loading dock:

2.g

Estimate the number of distinct shipments from the foreign port(s) of departure that will be needed for transporting to the United States the steel product subject to this Exclusion Request:

2.h

Identify the U.S. Destination Port(s) of Entry through which the steel product subject to this Exclusion Request would be transported:

Port 1

Port 2

Port 3

Port 4

Port 5

Port 6

Port 7

2.i

Is the organization making this Exclusion Request doing so on behalf of a non-U.S. steel producer that does not manufacture steel products in the United States?

If "Yes" identify the non-U.S. steel producer

Identify the country where the organization is headquartered

Comments:

2.j

Exclusion Request Product Information

For this single Exclusion Request, provide a full, complete description of the product in the space provided below. * See explanation below. The product for which an Exclusion is being requested is defined as follows:

* With regard to the product for which an Exclusion is requested, such a description must be limited to a single product. The description must be limited solely to physical properties (e.g., chemical requirements, mechanical requirements, dimensions, etc.) and exact descriptive terms/phrases covering the product subject to the Exclusion Request (e.g., “hot-rolled,” “seamless pipe,” “suitable for use in boilers,” “longitudinally submerged arc welded,” etc.). All such physical properties must be defined based on actual, rather than nominal, measurements; references to specific dimensions (e.g., “cross-sectional diameter of 5.50 mm”) or measurements (e.g., “yield strength of 300 MPa,” “carbon content 0.08%,” etc.) will be interpreted as meaning the exact dimension or measurement. Ranges (e.g., “cross-sectional diameter falling within the range 5.35 mm and 5.65 mm,” “yield strength greater than or equal to 300 MPa,” “carbon content less than or equal to 0.15%, by weight,” etc.) are allowed. Where a range is needed, it should be identified based on the end points of the range (as in the examples above), rather than through references to absolute or percentage tolerances.

Comments:

2.k

Identify the standards organizations that have set specifications for the product type that is the subject of this Exclusion Request, and provide the reference designation(s) for the identified standards organization(s), (e.g., ASTM A108-13):

Organization

Designation

Organization

Designation

Organization

Designation

1

3

5

2

4

6

Other (specify)

Other (specify)

Other (specify)

2.l

General Steel Product Description

Identify the classification and properties of the steel product covered under this Exclusion Request. Other classification or properties may be described in the Comment box below. (Select all that apply)

Slab

Blooms

Billets

Ingots

Flat

Long

Beams

Semi -Finished

Pipe

Tube

Stainless

Wire

Hot Rolled

Cold Rolled

Annealed

Plated

Electro- Plated

Galvanized

Electro- Galvanized

Zinc Plated

Aluminum Plated

Lead Plated

Tin Plated

Painted

Varnished

Plasticized

Pickled

Other (Use Comment Box)

Comment:

Continued on Next Page

Request for Exclusion from Remedies: Section 232 National Security Investigation of Steel Imports - Continued

3.a

Identify the chemical composition of the specific steel product for which your organization seeks an Exclusion. Numbers may appear rounded, but full values will be stored.

Chemical Composition

Chemical

Aluminum

Antimony

Bismuth

Boron

Carbon

Chromium

Cobalt

Copper

Iron

Lead

Manganese

Molybdenum

Nickel

Minimum %

Maximum %

Niobium

Nitrogen

Phosphorous

Selenium

Silicon

Sulfur

Tellurium

Titanium

Tungsten

Vanadium

Zirconium

[Other - List Below]

[Other - List Below]

Minimum %

Maximum %

Comments:

3.b

Provide the following information on the single steel product that is the subject of this Exclusion Request: 1) dimensional information for the single steel product and a single size -- not a range of products and or sizes (e.g., 19 mm dia. rebar - not 19, 22, 25, and 29 mm.) A separate Exclusion Request must be submitted for each steel product by physical dimension; 2) performance data for tensile strength, yield strength, hardness, impact, shear and test temperature. Numbers may appear rounded, but full values will be stored.

Steel Product Specifications (Millimeters)

Strength

Toughness (If Applicable)

Thickness

Inside Diameter

Outside Diameter

Length

Width

Height

Tensile Strength Mega Pascal (MPa)

Yield Strength Mega Pascal (MPa)

Hardness (specify method below - Brinnell, Rockwell, Vickers, etc.)

Test Type

Drop-Weight Tear Testing

Impact (Charpy) Testing

Other (specify type in comment box)

Temperature (°C)

Minimum

Joules

Maximum

% Shear

Comments:

3.c

Provide the following information on the single steel product that is the subject of this Exclusion Request: 1) performance data for ductility, magnetic permeability, surface finish; and 2) metal coating process, material type, weight, and thickness. Numbers may appear rounded, but full values will be stored.

Global Ductility

Local Ductility (If Applicable)

Magnetic Permeability (If Applicable)

Surface Finish (If Applicable)

Coating Type and Composition (If Applicable)

Elongation %

Reduction -in-Area %

Hole Expansion %

Bendability (Bend Radius/Sheet Thickness [millimeter]

Magnetic Permeability [Epstein Test]

Magnetic Permeability [Greer Lab Method]

Stacked Wide Sheet [ASTM A804/ A804M-04 (2015)]

Profilometer - [SAE J911]

Coating Method

Coating Product Name and Abbreviation

Composition (e.g., Zn, Al, Si, Mg, other intentionally added elements or alloys)

Weight [Grams per Sq. Meter]

Coating Thickness [micrometers]

Minimum

Maximum

Select any additional processing methods used:

Other (specify)

Comments:

Continued on Next Page

Request for Exclusion from Remedies: Section 232 National Security Investigation of Steel Imports - Continued

4.a

List the Commercial Name(s) of the single steel product that is the subject of this Exclusion Request.

Comments:

4.b

State the 1) application for the steel product (e.g., automotive, appliances, industrial products, structural, etc.) that is the subject of this Exclusion Request, and 2) why similar steel products manufactured in the United States, if available, are not suitable.

4.c

If the Exclusion is needed to support U.S. national security requirements (critical infrastructure or national defense systems), provide a detailed description of the specific uses of this single steel product in the space below:

4.d

Identify the source countries for the single steel product for which the Exclusion is requested, the annual quantity to be supplied in kilograms, and the name of the current manufacturer(s) of the steel product. If this steel product is not obtained directly from the manufacturer, identify the current supplier(s) and the country of the supplier(s). The Exclusion Request, if granted, will pertain solely to the identified supplier(s) listed in this form and the country of origin. NOTE: Steel products encompassing more than one 10-digit HTSUS code must submit a separate Exclusion Request for each pertinent code.

Country of Origin

Country of Export

Exclusion Quantity

Current Manufacturer

Current Supplier (if not obtained directly from manufacturer)

1

2

3

4

5

4.e

Product Availability Information

Does the Requester possess knowledge of any domestic U.S. parties that currently manufacture the described steel product in the United States?

Comment:

4.f

Does the Requester possess knowledge of any parties that currently manufacture the described steel product in a country exempted from this tariff? If yes, identify the country or countries below.

Comment:

4.g

Is the Requester aware of any manufacturers capable of producing a substitute for the steel product in the United States? If “Yes” provide supporting information (name and address) in the space below?

Comment:

4.h

Has the Exclusion Requester attempted to qualify any steel manufacturer in the United States as a supplier of the steel product that is the subject of this Exclusion Request in the past two years? If “Yes” provide supporting information in the space below. Supporting documents must be submitted as a consolidated PDF file and may not exceed 25 pages.

1

5

2

6

3

7

4

8

Comment:

Continued on Next Page

Request for Exclusion from Remedies: Section 232 National Security Investigation of Steel Imports - Continued

5.a

Has the Exclusion Requester attempted to purchase the described steel product that is the subject of this Exclusion Request, or a substitute, from a U.S. manufacturer in the past two years? If "Yes" identify the manufacturers, addresses, and your points of contact at the U.S. steel manufacturing organizations in the space below.

Comment:

5.b

Has the Exclusion Requester had supply contracts, or does it have current contracts, with steel producers that manufacture in the United States the steel product identified in the Exclusion Request? If "Yes" identify the U.S. steel manufacturers, addresses, and your points of contact at the U.S. manufacturing organizations in the space below.

5.c

Has the Exclusion Requester determined that there is no U.S. manufacturer that produces a near-equivalent steel product that would meet qualification requirements? If "Yes" identify in the space below the testing standards/procedures employed to make that determination (e.g., magnetic core loss, etc).

Comment:

5.d

In the last two years, has the Requester purchased a substitute steel product manufactured in the United States in place of the steel product described in the Exclusion Request? If “Yes” provide supporting information in the space below.

Comment:

5.e

Provide a detailed explanation as to how U.S. Customs and Border Protection (CBP) will be able to reasonably distinguish the steel product subject to the Exclusion Request at time of entry, without adding undue burden to their current entry system and procedures.

Submission of Exclusion Requests: All Exclusion Requests must be fully completed and submitted to www.regulations.gov under Docket Number BIS-2018-0006 using this Microsoft Excel electronic form. All information submitted will be subject to public disclosure, regardless of any statements by the Requester that some information should be treated otherwise. Any further information required as a part of this Exclusion Request will be determined and requested solely by the U.S. Department of Commerce.

Submission of Supporting Documents (Attachments): Supporting attachments should be submitted to www.regulations.gov as PDF documents and must be posted to www.regulations.gov under Docket Number BIS-2018-0006. Total supporting submissions may not exceed 25 pages.

Other Comments:

This request is for a product from a country subject to quantitative limitations:

I have additional information to provide that is proprietary or otherwise business confidential that is relevant and necessary to this submission:

Instruction: This Exclusion Request must be signed by an organization official specifically authorized to certify the document as being accurate and complete.

CERTIFICATION

The undersigned certifies that the information herein supplied in response to this questionnaire is complete and correct to the best of his/her knowledge. It is a criminal offense to willfully make a false statement or representation to any department or agency of the United States Government as to any matter within its jurisdiction. [18 U.S.C. 1001 (1984 & SUPP. 1197)]

Company Name:

Name of Authorizing Official:

Title of Authorizing Official:

Phone Number:

Email of Authorizing Official:

If the Point of Contact is different from the Authorizing Official provide point-of-contact information below.

Point-of-Contact Name:

Title

E-mail Address:

Phone Number

Paperwork Reduction Act Notice

Per the Paperwork Reduction Act of 1995, public reporting burden for this collection of information is estimated to average 4 hours per response, including the time to review instructions, search existing data sources, gather and maintain data needed, and complete and review the collection of information. Send comments regarding this burden estimate or any other aspects of this collection of information, to 1401 Constitution Avenue, NW, HCHB 1093, Office of Technology Evaluation, Bureau of Industry and Security, U.S. Department of Commerce, Washington, DC 20230 attn: 0694-0139. Commerce may not collect this information, and you are not required to respond; unless this OMB number is displayed.