Extension without change of a currently approved collection
No
Regular
07/14/2022
table that charts list comparision
Requested
Previously Approved
36 Months From Approved
07/31/2022
52,817
7,800
26,429
35,672
0
0
With respect to all the forms referenced below, the use and reporting of the information is mandatory to operate a non-Federally owned facility in the NAS. Non-Federal sponsors are required to submit the forms to their assigned FAA Inspector for retention. These forms are record keeping documents. Collection frequency varies depending on the form and the situation. Form 6000-10A is filled out once at the commissioning of the facility. Forms 6000-8A and 6030-1 are filled out at each maintenance visit, as needed. Documenting the initial parameters during commissioning is necessary to have a baseline to reference during future inspections. Another requirement is recording maintenance tasks, removal from service, and any other repairs performed on these facilities in on-site logs to have an accurate history on the performance of the facility. In addition, at each periodic inspection, recording the facilities' current parameters provides performance information for the life of the facility. This collection provides the FAA with the necessary data on non-Federally owned facilities to maintain safety in the NAS. There is no plan to publicly disseminate the collected information, nor use it to support publicly disseminated information. The information collected is for internal FAA use only, and not public consumption. The FAA's Non-Federal Program will retain control over the information and safeguard it from improper access, modification, and destruction, consistent with FAA standards for confidentiality, privacy, electronic information and document retention guidance. (See response to Question 10 of this Supporting Statement for more information on confidentiality and privacy.) The information collection is designed to yield data that meet all applicable information quality guidelines.
Technical Reference Data Record (TRDR), FAA Form 6000-10A. (Called Record of Meter Readings and Adjustments, Form FAA-198, in 14 CFR Part 171.) TRDRs contain the facility's parameters, including equipment adjustments and all meter readings, and the sponsor must fill it out at the end of commissioning the facility. The sponsor must retain this information on-site. During each periodic inspection, review of this document verifies that the facility remains within initial tolerance.
Technical Performance Record (TPR), FAA Form 6000-8A. (Called Radio Equipment Operation Records, Form 418, in 14 CFR Part 171.) TPRs contain a record of system parameters recorded in each scheduled routine maintenance visit to the facility. The sponsor or the sponsor's representatives must keep the original of each record at the facility and send a copy of the form to the FAA. This form provides proof and/or validation that the facility's parameters are within tolerance during each periodic inspection.
Facility Maintenance Logs, FAA Form 6030-1. (Called Facility Maintenance Log, Form 406C, in 14 CFR Part 171.) Facility Maintenance Logs are a permanent record of all the activities required to maintain a non-Federal facility. Logging is necessary in accordance with FAA policy. The entries must include all malfunctions encountered, if any, information on adjustments, equipment failures, causes, and corrective action taken. In addition, the entries must include any periodic maintenance required to operate the facility, and issuance of any facility NOTAMs. The FAA must receive copies of the logs. Generally, completion and close out of logs are at the end of each month. However, if maintenance or a scheduled outage carries over into the next month, the relevant log must be closed out at the conclusion of that maintenance or outage. In the case of an unscheduled outage that lasts longer than 60 seconds, the log must be terminated in time to ensure that the FAA will receive a copy of the log within 20 days of the outage's occurrence. This form documents a complete history of the operation and maintenance of the facility for the facility's life cycle until decommissioning.
US Code:
49 USC 40102
Name of Law: Definitions
US Code:
49 USC 44502
Name of Law: General facilities and personnel authority
US Code:
49 USC 44505
Name of Law: Systems, procedures, facilities, and devices
US Code:
49 USC 44702
Name of Law: Issuance of certificates
US Code:
49 USC 40103
Name of Law: Sovereignty and use of airspace
US Code:
49 USC 44708
Name of Law: Inspecting and rating air navigation facilities
US Code:
49 USC 44709
Name of Law: Amendments, modifications, suspensions, and revocations of certificates
US Code:
49 USC 46301
Name of Law: Civil penalties
There has been no change in the requirement; however the burden has been adjusted. A separate form (6000-10) is used at the commissioning of the facility to ensure this data is recognized as the baseline operating parameters. (This form was previously called the 6030-17.) The other two forms 6030-1 & 6000-8 (previously listed as 6790-3 and 6790-4) were previously used; they are required at each maintenance visit. Previous information collections listed forms 6790-3 and 6790-4, which are performance records for specific types of navigation aids (E.g., the VHF Omni-Directional Range.) However, these forms were either listed in error, or because data-collection procedures were different in the past. Today, a single performance record (6000-8) is used for nearly all of the navigation aids that the Non-Federal Program regulates. As a result, there is no longer any need to use 6790-3 and 6790-4. Regardless, the data being collected remains the same.
The Non-Federal Program is not responsible for the forms used and had no input in changes to the Form numbers and/or the names of the forms. These forms are not solely for the use of the Non-Federal Program.
On behalf of this Federal agency, I certify that the collection of information encompassed by this request complies with 5 CFR 1320.9 and the related provisions of 5 CFR 1320.8(b)(3).
The following is a summary of the topics, regarding the proposed collection of information, that the certification covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control number;
If you are unable to certify compliance with any of these provisions, identify the item by leaving the box unchecked and explain the reason in the Supporting Statement.
Form 6000-10 Technical Reference Data Record
Justification for No Material - Non-substantive Change_12.17.19.docx
Technical Reference Data Record