1014-0025 30-day published FRN

27528

In making this prescription, notice is
hereby given that whoever
manufactures, sells, or possesses this
insignia, or any colorable imitation
thereof, or photographs or prints or in
any other manner makes or executes any
engraving, photograph or print, or
impression in the likeness of this
insignia, or any colorable imitation
thereof, without written authorization
from the United States Department of
the Interior is subject to the penalty
provisions of section 701 of Title 18 of
the United States Code.
Authority: Secretary Order 3319:
Establishment of a National Water Trails
System; National Trails System Act, 16
U.S.C. 1246(c); and Protection of
Official Badges, Insignia, etc., 18 U.S.C.
701.
John Cannella,
National Program Manager, National Trails
System.
[FR Doc. 2023–09267 Filed 5–1–23; 8:45 am]
BILLING CODE 4312–52–P

DEPARTMENT OF THE INTERIOR
Bureau of Safety and Environmental
Enforcement

ddrumheller on DSK120RN23PROD with NOTICES1

[Docket ID BSEE–2022–0011; EEEE500000
234E1700D2 ET1SF0000.EAQ000; OMB
Control Number 1014–0025]

Agency Information Collection
Activities; Submission to the Office of
Management and Budget for Review
and Approval; Application for Permit
To Drill (APD, Revised APD),
Supplemental APD Information Sheet,
and All Supporting Documentation
Bureau of Safety and
Environmental Enforcement, Interior.
ACTION: Notice of information collection;
request for comment.
AGENCY:

VerDate Sep<11>2014

18:14 May 01, 2023

Jkt 259001

In accordance with the
Paperwork Reduction Act (PRA) of
1995, the Bureau of Safety and
Environmental Enforcement (BSEE)
proposes to renew an information
collection.

SUMMARY:

Interested persons are invited to
submit comments on or before June 1,
2023.
ADDRESSES: Written comments and
recommendations for the proposed
information collection should be sent
within 30 days of publication of this
notice to www.reginfo.gov/public/do/
PRAMain. Find this particular
information collection by selecting
‘‘Currently under 30-day Review—Open
for Public Comments’’ or by using the
search function. Please provide a copy
of your comments to Kye Mason, BSEE
ICCO, 45600 Woodland Road, Sterling,
VA 20166; or by email to kye.mason@
bsee.gov. Please reference OMB Control
Number 1014–0025 in the subject line of
your comments.
FOR FURTHER INFORMATION CONTACT: To
request additional information about
this ICR, contact Kye Mason by email at
[email protected], or by telephone at
(703) 787–1607. Individuals in the
United States who are deaf, deafblind,
hard of hearing, or have a speech
disability may dial 711 (TTY, TDD, or
TeleBraille) to access
telecommunications relay services.
Individuals outside the United States
should use the relay services offered
within their country to make
international calls to the point-ofcontact in the United States. You may
also view the ICR at http://
www.reginfo.gov/public/do/PRAMain.
SUPPLEMENTARY INFORMATION: In
accordance with the PRA and 5 CFR
1320.8(d)(1), we provide the general
public and other Federal agencies with
an opportunity to comment on new,
proposed, revised, and continuing
DATES:

PO 00000

Frm 00098

Fmt 4703

Sfmt 4703

collections of information. This helps us
assess the impact of our information
collection requirements and minimize
the public’s reporting burden. It also
helps the public understand our
information collection requirements and
provide the requested data in the
desired format.
A Federal Register notice with a 60day public comment period soliciting
comments on this collection of
information was published on August 4,
2022 (87 FR 47787). One comment was
received but was not germane to the
information collection.
As part of our continuing effort to
reduce paperwork and respondent
burdens, we are again soliciting
comments from the public and other
Federal agencies on the proposed ICR
that is described below. We are
especially interested in public comment
addressing the following:
(1) Whether or not the collection of
information is necessary for the proper
performance of the functions of the
agency, including whether or not the
information will have practical utility;
(2) The accuracy of our estimate of the
burden for this collection of
information, including the validity of
the methodology and assumptions used;
(3) Ways to enhance the quality,
utility, and clarity of the information to
be collected; and
(4) How might the agency minimize
the burden of the collection of
information on those who are to
respond, including through the use of
appropriate automated, electronic,
mechanical, or other technological
collection techniques or other forms of
information technology, e.g., permitting
electronic submission of response.
Comments that you submit in
response to this notice are a matter of
public record. Before including your
address, phone number, email address,
or other personal identifying

E:\FR\FM\02MYN1.SGM

02MYN1

EN02MY23.003

Federal Register / Vol. 88, No. 84 / Tuesday, May 2, 2023 / Notices

ddrumheller on DSK120RN23PROD with NOTICES1

Federal Register / Vol. 88, No. 84 / Tuesday, May 2, 2023 / Notices
information in your comment, you
should be aware that your entire
comment—including your personal
identifying information—may be made
publicly available at any time. While
you can ask us in your comment to
withhold your personal identifying
information from public review, we
cannot guarantee that we will be able to
do so.
Abstract: The regulations at 30 CFR
part 250 pertain to Application for
Permit to Drill (APD, Revised APD),
Supplemental APD Information Sheet,
and all supporting documentation and
are the subject of this collection. This
request also covers the related Notices
to Lessees and Operators (NTLs) that
BSEE issues to clarify, supplement, or
provide additional guidance on some
aspects of our regulations.
The BSEE uses the information to
ensure safe drilling operations and to
protect the human, marine, and coastal
environment. Among other things, BSEE
specifically uses the information to
ensure: the drilling unit is fit for the
intended purpose; the lessee or operator
will not encounter geologic conditions
that present a hazard to operations;
equipment is maintained in a state of
readiness and meets safety standards;
each drilling crew is properly trained
and able to promptly perform wellcontrol activities at any time during
well operations; compliance with safety
standards; and the current regulations
will provide for safe and proper field or
reservoir development, resource
evaluation, conservation, protection of
correlative rights, safety, and
environmental protection. We also
review well records to ascertain whether
drilling operations have encountered
hydrocarbons or H2S and to ensure that
H2S detection equipment, personnel
protective equipment, and training of
the crew are adequate for safe
operations in zones known to contain
H2S and zones where the presence of
H2S is unknown.
This ICR includes forms BSEE–0123
(APD) and BSEE–0123S (Supplemental
APD Information Sheet). The BSEE uses
the information from these forms to
determine the conditions of a drilling
site to avoid hazards inherent in drilling
operations. Specifically, we use the
information to evaluate the adequacy of
a lessee’s or operator’s plan and
equipment for drilling, sidetracking, or
deepening operations. This includes the
adequacy of the proposed casing design,
casing setting depths, drilling fluid
(mud) programs, cementing programs,
and blowout preventer (BOP) systems to
ascertain that the proposed operations
will be conducted in an operationally
safe manner that provides adequate

VerDate Sep<11>2014

18:14 May 01, 2023

Jkt 259001

protection for the environment. BSEE
also reviews the information to ensure
conformance with specific provisions of
the lease. In addition, except for
proprietary data, BSEE is required by
the OCSLA to make available to the
public certain information submitted on
Forms BSEE–0123 and –0123S.
The forms use and information
consist of the following:
BSEE–0123
Heading: BSEE uses the information
to identify the type of proposed drilling
activity for which approval is requested.
Well at Total Depth/Surface:
Information utilized to identify the
location (area, block, lease, latitude and
longitude) of the proposed drilling
activity.
Significant Markers Anticipated:
Identification of significant geologic
formations, structures and/or horizons
that the lessee or operator expects to
encounter. This information, in
conjunction with seismic data, is
needed to correlate with other wells
drilled in the area to assess the risks and
hazards inherent in drilling operations.
Question/Information: The
information is used to ascertain the
adequacy of the drilling fluids (mud)
program to ensure control of the well,
the adequacy of the surface casing
compliance with EPA offshore pollutant
discharge requirements and the shut in
of adjacent wells to ensure safety while
moving a rig on and off a drilling
location, as well that the worst case
discharge scenario information reflects
the well and is updated if applicable.
This information is also provided in the
course of electronically requesting
approval of drilling operations via
eWell.
BSEE–0123S
Heading: BSEE uses this information
to identify the lease operator, rig name,
rig elevation, water depth, type well
(exploratory, development), and the
presence of H2S and other data which
is needed to assess operational risks and
safety.
Well Design Information: This
engineering data identifies casing size,
pressure rating, setting depth and
current volume, hole size, mud weight,
BOP and well bore designs, formation
and BOP test data, and other criteria.
The information is utilized by BSEE
engineers to verify operational safety
and ensure well control to prevent
blowouts and other hazards to
personnel and the environment. This
form accommodates requested data
collection for successive sections of the
borehole as drilling proceeds toward
total depth below each intermediate
casing point.

PO 00000

Frm 00099

Fmt 4703

Sfmt 4703

27529

Title of Collection: 30 CFR part 250,
Application for Permit to Drill (APD,
Revised APD), Supplemental APD
Information Sheet, and all supporting
documentation.
OMB Control Number: 1014–0025.
Form Number: Forms BSEE–0123 and
BSEE–0123S.
Type of Review: Extension of a
currently approved collection.
Respondents/Affected Public:
Potential respondents include Federal
OCS oil, gas, and sulfur lessees and/or
operators and holders of pipeline rightsof-way.
Total Estimated Number of Annual
Respondents: Currently there are
approximately 555 Federal OCS oil, gas,
and sulfur lessees and holders of
pipeline rights-of-way. Not all the
potential respondents will submit
information in any given year, and some
may submit multiple times.
Total Estimated Number of Annual
Responses: 11,206.
Estimated Completion Time per
Response: Varies from .5 hour to 125
hours, depending on activity.
Total Estimated Number of Annual
Burden Hours: 77,816.
Respondent’s Obligation: Most
responses are mandatory while others
are to obtain and/or retain a benefit.
Frequency of Collection: Submitted
generally on occasion and as required in
the regulations.
Total Estimated Annual Nonhour
Burden Cost: $4,298,876.
An agency may not conduct, or
sponsor and a person is not required to
respond to a collection of information
unless it displays a currently valid OMB
control number.
The authority for this action is the
Paperwork Reduction Act of 1995 (44
U.S.C. 3501 et seq.).
Kirk Malstrom,
Chief, Regulations and Standards Branch.
[FR Doc. 2023–09237 Filed 5–1–23; 8:45 am]
BILLING CODE 4310–VH–P

INTERNATIONAL TRADE
COMMISSION
[Investigation Nos. 731–TA–1607–1611
(Preliminary)]

Boltless Steel Shelving Units
Prepackaged for Sale From India,
Malaysia, Taiwan, Thailand, and
Vietnam; Institution of Anti-Dumping
Duty Investigations and Scheduling of
Preliminary Phase Investigations
United States International
Trade Commission.
ACTION: Notice.
AGENCY:

E:\FR\FM\02MYN1.SGM

02MYN1