NESHAP for Clay Ceramics Manufacturing, Glass Manufacturing and Secondary Nonferrous Metals Processing Area Sources (40 CFR Part 63, Subparts RRRRRR, SSSSSS, and TTTTTT) (Renewal)
NESHAP for Clay Ceramics Manufacturing, Glass Manufacturing and Secondary Nonferrous Metals Processing Area Sources (40 CFR Part 63, Subparts RRRRRR, SSSSSS, and TTTTTT) (Renewal)
Extension without change of a currently approved collection
No
Regular
Approved with change
03/10/2026
12/28/2022
In accordance with 5 CFR 1320, the information collection is approved for three years. Please convert the supporting statement to the standard 18 question SS-A format upon renewal.
table that charts list comparision
Inventory as of this Action
Requested
Previously Approved
03/31/2029
36 Months From Approved
03/31/2026
15
0
14
1,970
0
1,950
13,900
0
13,200
The National Emission Standards for Hazardous Air Pollutants (NESHAP) for Clay Ceramics Manufacturing, Glass Manufacturing, and Secondary Nonferrous Metals Processing Area Sources (40 CFR Part 63, Subparts RRRRRR, SSSSSS, and TTTTTT) were proposed on September 20, 2007, and promulgated on December 26, 2007. These regulations apply to the following existing and new facilities: 1) clay ceramics manufacturing facilities that process more than 50 tons per year of wet clay and are area sources of hazardous air pollutants (HAP); 2) glass manufacturing facilities that use continuous furnaces to produce glass that contains HAP as raw materials and are area sources of HAP; and 3) secondary nonferrous metals processing facilities that are area sources of HAP. Clay ceramics manufacturing facilities include facilities that manufacture pressed tile, sanitaryware, dinnerware, or pottery with an atomized glaze spray booth or kiln that fires glazed ceramic ware. Glass manufacturing facilities include facilities that manufacture flat glass, glass containers, or pressed and blown glass by melting a mixture of raw materials, to produce molten glass and form the molten glass into sheets, containers, or other shapes. Secondary nonferrous metals processing facilities means brass and bronze ingot making, secondary magnesium processing, or secondary zinc processing plants that use furnace melting operations to melt post-consumer nonferrous metal scrap to make products including bars, ingots, blocks, or metal powders. New facilities include those that commenced construction, modification or reconstruction after the date of proposal. This information is being collected to assure compliance with 40 CFR Part 63, Subparts RRRRRR, SSSSSS, and TTTTTT.
In general, all NESHAP standards require initial notifications, performance tests, and periodic reports by the owners/operators of the affected facilities. They are also required to maintain records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility, or any period during which the monitoring system is inoperative. These notifications, reports, and records are essential in determining compliance, and are required of all affected facilities subject to NESHAP.
The increase in burden from the most-recently approved ICR is due to an adjustment. The adjustment increase is due to an increase in the number of respondents, including one new respondent expected during the three-year period of this ICR. There is an increase in cost due to the increased number of respondents.
The new source is not expected to incur capital costs; therefore, there is no change in the capital/startup costs from the most-recently approved ICR. There is an increase in O&M costs due to the use of updated labor rates associated with inspections of emission control systems for glass manufacturing facilities. This ICR uses the technical labor rate from the most-recent Bureau of Labor Statistics report (September 2021) to calculate respondent burden costs associated with inspection of emission control systems.
$117
No
No
No
No
No
No
No
Muntasir Ali 919 541-0833
Reginfo record details
No
On behalf of this Federal agency, I certify that the collection of information encompassed by this request complies with 5 CFR 1320.9 and the related provisions of 5 CFR 1320.8(b)(3).
The following is a summary of the topics, regarding the proposed collection of information, that the certification covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control number;
If you are unable to certify compliance with any of these provisions, identify the item by leaving the box unchecked and explain the reason in the Supporting Statement.
2274t07.xlsx
2274ss07.docx
Secondary Nonferrous Metals Processing Area Sources (40 CFR part 63, subpart TTTTTT)