T100-Segment

PART 241 – Form T100
Traffic and Capacity Statistics Segment Report
OMB NO: 2138-0040
EXPIRATION DATE: 11/30/2023
Paperwork Reduction Act Burden Statement
A federal agency may not conduct or sponsor, and a person is not required to respond to, nor shall a person be subject to a
penalty for failure to comply with a collection of information subject to the requirements of the Paperwork Reduction Act unless
that collection of information displays a current valid OMB Control Number. The OMB Control Number for this information
collection is 2138-0040. Public reporting for Schedule T-100, Report of Traffic and Capacity, is estimated to be approximately 6
hours per response, including the time for reviewing instructions, completing and reviewing the collection of information. All
responses to this collection of information are mandatory, as authorized by 14 CFR, Part 241. Send comments regarding this
burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to:
Information Collection Clearance Officer, Jennifer Rodes, OAI/BTS, RTS-42, Room E34, 1200 New Jersey Avenue, SE,
Washington, D.C. 20590 or e-mail – [email protected].

REQUIREMENTS
RECORD DESCRIPTION: T100 – Traffic and Capacity Statistics for Segment Report
Data Type

Length

Comments

Sample Data

Data Type

Character

1

One letter code (S)

S

Entity code

Character

5

0A050

Year of Data
Month of Data
Origin Airport

Numeric
Numeric
Character

4
2
3

Destination Airport

Character

3

Service Class

Character

1

Segment Aircraft Type

Numeric

3

Segment Cabin Configuration

Numeric

1

Segment Departures Performed

Numeric

5

Segment Available Capacity

Numeric

10

Segment Available Seats

Numeric

7

Segment Passengers Transported

Numeric

7

Five character code
assigned by DOT
Year (CCYY)
Month (MM)
Three letter OAG airport
code
Three letter OAG airport
code
One letter service class
code: F, G, L, N, P, R, H
DOT assigned three
numeric aircraft type code
One numeric aircraft cabin
configuration code: 1,2,3,4
Up to five numeric
departures performed
Up to ten numeric,
reported in pounds
Up to seven numeric,
aircraft seating capacity
Up to seven numeric,
reported transported

Field Description

2010
03
BWI
LAS
F
698
1
25
125000000
1250
922

Segment Freight Transported

Numeric

10

Segment Mail Transported

Numeric

10

Segment Scheduled Departures

Numeric

5

Segment Ramp to Ramp Minutes

Numeric

10

Segment Airborne Minutes

Numeric

10

passengers
Up to ten numeric, freight
reported in pounds
Up to ten numeric, mail
reported in pounds
Up to five numeric
scheduled departures
Up to ten numeric,
reported in minutes
Up to ten numeric,
reported in minutes

25338
989
23
789
685

RECORD FORMAT:
The T100 – Traffic and Capacity Statistics for Segment data reports must be created as an electronic
“comma separated values” file, using ASCII text character encoding, for uploading via the “eSubmit”
application.
The comma separated values file MUST BE indicated when naming the file, by using the letters [CSV] or
[csv] following the file name, as the file name extension.
The file name is flexible and may be determined by the individual air carrier, but the comma separated
values (csv) file format is required, as outlined in the rule entitled, Submitting Airline Data via the
Internet.
The fields in the sample record shown below follow the same order as the above record description,
separated by commas, and saved with the file name extension of .csv.
Suggested file name: XX201003-T100SEG.csv
Sample Record Format:
S,0A050,2010,03,BWI,LAS,F,698,1,25,12500000,1250,922,25338,989,23,789,
685