BAS Paper How-to Guide

Boundary and Annexation Survey
Paper How-to Guide
Instructions for Participating in the Boundary and Annexation Survey Using Paper Maps

Last Updated January 2025.

U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

i

TABLE OF CONTENTS
Introduction ......................................................................................................................... vi
A.

Key Dates for Respondents..............................................................................................vi

B.

Adjacencies and Legal Disputes .......................................................................................vi

C.

Contact Us ....................................................................................................................... vii

D.

Resources ........................................................................................................................ vii

Chapter 1 Completing A Paper BAS Submission ................................................................... 1
1.1

Check the Package Materials ........................................................................................... 1

1.2

Update the Maps ............................................................................................................. 1

1.2.1 How to Read the Maps ................................................................................................ 1
1.3

Return the Completed Submission .................................................................................. 1

Chapter 2 Marking Updates on the Map: Boundaries ........................................................... 2
2.1

Legal Changes .................................................................................................................. 2

2.1.1 How to Draw Legal Boundary Changes ....................................................................... 2
2.1.2 Boundary Changes Involving Coincident Features...................................................... 3
2.2

Boundary Corrections ...................................................................................................... 4

2.3

Corridors and Offsets ....................................................................................................... 4

2.3.1 Geographic Corridors .................................................................................................. 4
2.3.2 Geographic Offsets ...................................................................................................... 5
2.4

Tribal Subdivisions ........................................................................................................... 5

2.4.1 Submitting New Tribal Subdivisions ............................................................................ 6
2.4.2 Updating Existing Tribal Subdivisions.......................................................................... 6
2.4.3 Tribal Subdivision Documentation .............................................................................. 6
2.5

New Incorporations and Disincorporations..................................................................... 7

Chapter 3 Marking Updates on the Map: Features ............................................................... 8
3.1

Linear Features ................................................................................................................ 8

3.1.1 Modifying Street Locations ......................................................................................... 8
3.1.2 Adding Streets ............................................................................................................. 8
3.1.3 Adding Street Names in a Congested Area ................................................................. 9
3.1.4 Correcting Street Names ........................................................................................... 10
3.1.5 Deleting Streets ......................................................................................................... 10
3.1.6 Adding Cul-De-Sacs or Circles.................................................................................... 11
U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

ii

Appendix A

Reading a Map ............................................................................................. A-1

A1

Index Maps.................................................................................................................... A-1

A2

Parent Maps.................................................................................................................. A-2

A3

Inset Maps .................................................................................................................... A-3

A4

Scales ............................................................................................................................ A-4

A5

Compass Rose ............................................................................................................... A-5

A6

Legend........................................................................................................................... A-5

U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

iii

LIST OF FIGURES
Figure 1. Annotating a Legal Boundary Change .............................................................................. 2
Figure 2. Annotating an AIA Trust Land .......................................................................................... 3
Figure 3. Annotating a Legal Boundary Change Coincident with a Feature ................................... 3
Figure 4. Annotating a Legal Change to an Incorporated Place ..................................................... 4
Figure 5. Annotating a Boundary Correction to an Incorporated Place Boundary ........................ 4
Figure 6. Indicating a Geographic Corridor ..................................................................................... 5
Figure 7. Depicting a Geographic Offset ......................................................................................... 5
Figure 8. Recording New Tribal Subdivision Information ............................................................... 6
Figure 9. Modifying a Street Feature Location ............................................................................... 8
Figure 10. Adding Street Features/Annotating with Name and Address Breaks ........................... 9
Figure 11. Adding an MTFCC when Adding a New Street............................................................... 9
Figure 12. Listing Street Names when Adding Streets in a Congested Area ................................ 10
Figure 13. Correcting a Street Name ............................................................................................ 10
Figure 14. Deleting a Street Feature ............................................................................................. 10
Figure 15. Adding Cul-de-sac and Circle Features ........................................................................ 11
Figure 18. Index Map ................................................................................................................... A-1
Figure 19. Parent Map ................................................................................................................. A-2
Figure 20. Key to Adjacent Sheets ............................................................................................... A-3
Figure 21. Sheet Location within Government Key ..................................................................... A-3
Figure 22. Inset Map Displayed on the Index Map ...................................................................... A-3
Figure 23. Inset Map .................................................................................................................... A-4
Figure 24. Bar Scale ...................................................................................................................... A-4
Figure 25. Compass Rose ............................................................................................................. A-5
Figure 26. Legend Details ............................................................................................................. A-5
Figure 27. Map Depicting Multiple Features Concurrently ......................................................... A-6

U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

iv

This page left blank intentionally.

U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

v

INTRODUCTION
The Boundary and Annexation Survey (BAS) provides eligible governments, which include tribal,
state, and general-purpose local governments, an opportunity to review the Census Bureau’s
legal boundary data to confirm the Census Bureau has the correct boundary, name, and status
information. BAS also allows participants to review and provide updates to census designated
place (CDP) boundaries and linear features. Maintaining correct boundaries helps the Census
Bureau assign appropriate housing and population counts to each government. Title 13, Section
6, United States Code authorizes this survey.
BAS fulfills the agency’s responsibility as part of the National Spatial Data Infrastructure, for
which the Office of Management and Budget (OMB) Circular A–16 designates the Census
Bureau as the lead federal agency for maintaining national data about legal government
boundaries, as well as administrative and statistical boundaries. BAS supports the geospatial
data steward responsibilities of the Geospatial Data Act, the Evidence Act, OMB E-Gov, the
Federal Geographic Data Committee, Data.gov, GeoPlatform.gov, the National Map, the
Geographic Names Information System, and the Geospatial One-Stop.
The Census Bureau uses the boundaries collected in BAS to tabulate data for various censuses
and surveys including the decennial census, American Community Survey (ACS), and Population
Estimates Program (PEP). It also uses the boundaries collected through BAS to support several
other programs such as Congressional and State Legislative redistricting, the Economic Census,
the Geographically Updated Population Certification Program, and the Special Census program.

A.

Key Dates for Respondents

January 1

Legal boundary changes must be in effect on or before this date to be reported
in the current survey year.

March 1

First BAS deadline–Legal boundary changes returned or postmarked by this date
will be shown in the ACS and PEP data and in next year’s BAS materials.

May 31

Final BAS deadline–Legal boundary changes returned or postmarked by this date
will be shown in next year’s BAS materials. If time permits, boundary corrections
returned by this date may also be shown.

B.

Adjacencies and Legal Disputes

The Census Bureau will not make any boundary change that affects adjacent legal governments
without the appropriate documentation. Review any changes that affect adjacent governments
to determine if they are intentional legal changes. If the Census Bureau discovers that an area
of land is in dispute between two or more jurisdictions, the Census Bureau will not make any
changes until the parties come to a written agreement or there is a documented final court
decision regarding the dispute. To learn more, contact the Census Bureau Legal Office at
1-301-763-2918.

U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

vi

For disputes involving tribal areas, the Census Bureau must defer to the Office of the Solicitor at
the Department of the Interior for a legal opinion. Often complicated land issues require an
extended period for resolution, and in those cases, the Census Bureau will retain the current
boundary until a legal opinion is issued by the Solicitor's office.

C.

Contact Us

For assistance in preparing your BAS submission, contact the Census Bureau at
or 1-800-972-5651.

D.

Resources

Additional resources include a technical guide and videos that demonstrate the BAS submission
process. For background on Census Bureau geography and technical details regarding the BAS
submission, change types, and shapefiles are in the BAS Technical Guide at:
. Videos of
recorded demonstrations and informational sessions are available on the BAS website at:
.

U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

vii

CHAPTER 1

COMPLETING A PAPER BAS SUBMISSION

Use the instructions and help references from this section to begin.

1.1

Check the Package Materials

The Paper BAS package contains: this guide, the materials package cover letter, an index map,
larger scale map sheet(s), colored pencils, a postage paid return envelope, and a return label.

1.2

Update the Maps

Compare the BAS maps to a local source for the government (e.g., a local plat map or a county
assessor’s dataset). Update the map(s) if the boundaries shown do not correctly depict the
boundaries in effect as of January 1 of the current survey year.
Chapter 2 and Chapter 3 of this guide give detailed instructions on how to update the map
using the pencils provided.

1.2.1

How to Read the Maps

Appendix A of this guide describes how to interpret the paper maps provided; however,
viewing a digital map of the boundaries in TIGERweb, before annotating the paper maps, can be
helpful.
TIGERweb is the
Census Bureau’s online map viewer that can be used to see a more detailed version of
boundaries alongside imagery. The TIGERweb for BAS instructions can be found on the BAS
website at: .

1.3

Return the Completed Submission

Return all updated maps using the postage paid return envelope and return label from the
Paper BAS package, or mail the updated maps to the Census Bureau at the address listed below:
U.S. Census Bureau
National Processing Center
1621 Dutch Lane
ATTN: BAS, Check-in and Batching Section, Bldg 60A
Jeffersonville, IN 47130

U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

1

CHAPTER 2

MARKING UPDATES ON THE MAP: BOUNDARIES

BAS participants using paper maps may only make updates affecting legal boundaries. Updates
needed for census designated places cannot be performed as a paper participant. Please
Contact Us if questions exist regarding this detail.

2.1

Legal Changes

All legal changes (annexations and deannexations) must have documentation supporting the
change(s) annotated on the map. AIA legal boundary changes must have AIA legal
documentation (e.g., statute, federal court decision, trust deed) submitted with each requested
change. Legal changes from incorporated places, minor civil divisions (MCDs), and counties
must have an authorization number, such as a resolution or ordinance number, authorization
type, and the effective date noted on the map.

2.1.1

How to Draw Legal Boundary Changes

Figure 1 and Figure 2 illustrate the correct way to draw legal boundary changes on BAS maps.
1. Using the red pencil provided, cross out the portion of the boundary that is no longer current
with a string of “Xs”.
2. Draw the new boundary line(s) ensuring the boundary is closed.
3. Add the ordinance number or other legal identifier of the action authorizing the change, along
with the effective date of each annexation or deannexation that is drawn on the map.

Figure 1. Annotating a Legal Boundary Change

U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

2

Figure 2. Annotating an AIA Trust Land

2.1.2

Boundary Changes Involving Coincident Features

Figure 3 and Figure 4 illustrate how to adjust a boundary that is currently coincident with
(i.e., follows exactly) a feature, such as a river or street.
1. Using the red pencil, cross out the portion of the boundary that is no longer current using a
string of “Xs” inside circles.
2. Draw the updated boundary.
3. Add the authorization number or other identifier of the action authorizing the change along
with the effective date of each addition or deletion next to the area being changed.

If both the boundary and feature need to be moved, cross out the incorrect boundary with red
“Xs” and then draw a red line representing the new location of the boundary and road.

Figure 3. Annotating a Legal Boundary Change Coincident with a Feature

U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

3

Figure 4. Annotating a Legal Change to an Incorporated Place
Left: Only the boundary moves to the new location. The street feature location is correct, but the boundary
location is incorrect. Right: Both the boundary and the street feature move to a new location. Both the
boundary and the street feature location are incorrect.

2.2

Boundary Corrections

A boundary correction is the adjustment of a boundary to correct an error in the Census
Bureau’s version of the boundary, and it is not the result of a legal change. Boundary
corrections should follow the general shape of the existing boundary. Legal documentation is
not required when submitting a boundary correction to the Census Bureau. Figure 5 illustrates
how to complete a boundary correction.
1. Using the red pencil, cross out the incorrect boundary with a string of “Xs”.
2. Add a line showing the correct boundary.
3. Print the letters “BC” inside the change to identify the update as a boundary correction rather
than a legal change.

Figure 5. Annotating a Boundary Correction to an Incorporated Place Boundary

2.3
2.3.1

Corridors and Offsets
Geographic Corridors

The Census Bureau does not require places and AIAs to report rights-of-way. Geographic
corridors are not essential to the mission of the Census Bureau and the right-of-way should only
be included if it is crucial to the place or AIA, or if state or local laws require it.
U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

4

To indicate a geographic corridor on the map, use the red pencil to draw a line on each side of
the road. Mark the beginning and end of each line with perpendicular hatch (||) marks. Write
the letters “GC” beside each line (Figure 6). To remove a geographic corridor or offset, use the
red pencil to mark the beginning and end of the corridor or offset with perpendicular hatch (||)
marks and write “remove GC.”

Figure 6. Indicating a Geographic Corridor

2.3.2

Geographic Offsets

To indicate a geographic offset on the map, use the red pencil to draw a line parallel to the
road, along which the offset will be created. Mark the beginning and end of the line with
perpendicular hatch (||) marks. Write the letters “OFF” on the side of the road where the
geographic offset exists (Figure 7).

Figure 7. Depicting a Geographic Offset

2.4

Tribal Subdivisions

The Census Bureau considers any type of unit of self-government or administration in tribal
areas as a tribal subdivision. A tribe may submit only one type of subdivision, even if it has more
than one type of distinct administrative area that could qualify as a tribal subdivision
(e.g., tribal election districts, tribal water districts, or health service areas with different
boundaries). The Census Bureau recognizes two types of tribal subdivisions – active (A) and
inactive (I):

U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

5

•
•

2.4.1

Active subdivisions are defined as having a functioning government, with elected
officials, that provides programs and services.
Inactive subdivisions have no functioning government or elected officials and receive
services solely from the tribe.

Submitting New Tribal Subdivisions

If this is the first time that tribal subdivisions are being provided to the Census Bureau do the
following (Figure 8):
1. Using the blue pencil, add the boundaries on the BAS map(s).
2. Each tribal subdivision must be labeled on each map sheet with its name (e.g., “District 3,”
“Arlee District,” “White Rock Chapter,” “Parmelee Community”).
3. Record the name, type, and status of each subdivision on the map.
4. If a tribal subdivision boundary follows a visible feature such as a stream, road, or fence-line, be
sure to indicate that on the BAS map. Add the visible feature the boundary follows if it is not
already shown on the map.

Figure 8. Recording New Tribal Subdivision Information

2.4.2

Updating Existing Tribal Subdivisions

If tribal subdivisions were delineated during a prior survey, they are symbolized on the enclosed
BAS maps by a dashed pentagon-shaped gold line. To add or revise tribal subdivision
boundaries on the enclosed map(s):
1. Using the red pencil, note any changes to the boundary of the land base on the map(s).
2. Using the blue pencil, add and/or revise the boundaries of the tribal subdivisions on the
enclosed BAS map(s).

2.4.3

Tribal Subdivision Documentation

New tribal subdivisions and name changes to existing tribal subdivisions require
documentation, regardless of whether they are being delineated for the first time or being
added to those previously reported. This documentation should be in the form of a tribal
resolution or a tribal constitution. Include a copy of this documentation with the BAS maps
when returning these materials to the Census Bureau.
Corrections to the Census Bureau’s depiction of tribal subdivision boundaries do not require
documentation.
U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

6

2.5

New Incorporations and Disincorporations

Newly incorporated governments should provide the Census Bureau with:
1. A copy of the official new incorporation papers, including date of incorporation.
2. A map indicating the boundaries of the new incorporation.
3. Contact information for the highest elected official and a contact for BAS.

Disincorporated governments should provide the Census Bureau with a copy of the official
papers of disincorporation, including the effective date.

U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

7

CHAPTER 3

MARKING UPDATES ON THE MAP: FEATURES

The primary purpose of BAS is to collect legal boundary information. However, feature (e.g.,
street centerlines, rivers, and other linear features) updates and modifications occurring within
your government’s jurisdiction may be reported through BAS.

3.1

Linear Features

3.1.1

Modifying Street Locations

1. Using the purple pencil, cross out the incorrect feature location with “Xs”. Only correct streets
that are incorrectly located, mislabeled, or distorted.
2. Draw the feature in the correct location.
3. Print the name of the feature along the length of the feature as shown in Figure 9.

Figure 9. Modifying a Street Feature Location

3.1.2

Adding Streets

1. Using the purple pencil, draw the feature and its name on the map. If the correct attribution is
not provided, the Census Bureau will not make the correction for this BAS cycle.
Where possible, provide the address range for any new streets, only if one of the following
circumstances exists:
•

A road where house numbers, street names, and/or addresses were added or deleted.

•

A street was added that crosses a boundary.

2. Using the purple pencil, add in the address ranges, providing the lowest and/or highest possible
addresses where the road intersects a boundary.

U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

8

Figure 10. Adding Street Features/Annotating with Name and Address Breaks

3. Provide the Master Address File/Topologically Integrated Geographic Encoding and Referencing
(MAF/TIGER) Feature Class Code (MTFCC) for all new streets (Figure 11). The MTFCC will be
S1400 for most residential streets. A full list of MTFCC codes and descriptions can be found at:
.
4. Alternate street names may be written in parentheses below the primary street name. Due to
the difficulty of showing multiple names for a street, only the primary street name is shown on
BAS maps.

Figure 11. Adding an MTFCC when Adding a New Street

3.1.3

Adding Street Names in a Congested Area

1. If an area of the map is too congested to add all feature names, using the purple pencil, number
each feature and list this number and the corresponding feature name in the map margin or in
an uncongested spot close to the feature’s actual location (Figure 12).
2. Do not repeat numbers on a map sheet.

U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

9

Figure 12. Listing Street Names when Adding Streets in a Congested Area

3.1.4

Correcting Street Names

1. Using the purple pencil, draw a line through the incorrect street name.
2. Print the correct street name along the feature.

Figure 13. Correcting a Street Name

3.1.5

Deleting Streets

1. Delete street features only if they are nonexistent or impassable. Do not delete a street because
the local jurisdiction is not responsible for maintaining it.
2. Using the purple pencil, mark the beginning and end of the base feature to be deleted with
hatch (||) marks perpendicular to the feature as shown below.
3. Cross-out the nonexistent street feature using a string of “Xs”.

Figure 14. Deleting a Street Feature

U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

10

3.1.6

Adding Cul-De-Sacs or Circles

1. Using the purple pencil, draw the feature as follows:
• Cul-de-sacs are entirely paved and should be drawn as a solid dot.
• Circles have an area of unpaved ground within them and should be drawn as an unfilled
circle.
2. Print the name of the associated street leading to the cul-de-sac or circle.

Figure 15. Adding Cul-de-sac and Circle Features

U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

11

APPENDICES

U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

12

APPENDIX A
A1

READING A MAP

Index Maps

When deciding which map to use for a BAS submission, it is necessary to view the government
as a whole and choose the correct parent map sheet based on its location within the
government. Do this by referring to the index map (Figure 18), a relatively small-scale map that
shows the entire government, and the location and number of all parent map sheets within
that government. Each parent map sheet has a numerical locator, which differentiates it from
the other parent map sheets associated with that government. The numbering begins with the
northern and western-most parent map sheets and continues left-to-right. By referring to the
index map, determine which parent map sheet(s) to use for the BAS submission, and then
access it based on its number on the index map. The index map is not appropriate for BAS
submissions. Its purpose is as a reference or index of parent maps, and it will not be accepted
as a BAS submission.

Figure 16. Index Map

U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

A-1

A2

Parent Maps

Many governments are too large to be shown on a single map. For this reason, it is necessary to
separate the government into sections, each of which has its own map, called the parent map
sheet (Figure 19). A single government is often represented with numerous map sheets, with
each parent map sheet showing a small section of the government. Each parent map is assigned
a number, beginning with the number one and increasing progressively for each additional
parent map sheet (i.e., 1, 2, 3, 4, and so on). This makes viewing and editing map sheets more
manageable, and it becomes possible to depict an area with the level of detail necessary to
make changes or challenges. In most instances, the parent map is the one that should be used
for BAS submissions.

Figure 17. Parent Map

In the bottom right-hand corner of the parent map sheet, there is a key to the parent map
sheet’s location in relation to adjacent map sheets as shown in Figure 19 above. A larger
example of this key is shown in Figure 20. This key helps the user quickly determine which
adjacent map sheet to use.

U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

A-2

Figure 18. Key to Adjacent Sheets

Next to the key to adjacent sheets, there is a small outline of the entire government (the inside
of which is colored yellow), and a blue outline of the parent map sheet. This key displays the
location of the map sheet in relation to the government as a whole (Figure 21).

Figure 19. Sheet Location within Government Key

A3

Inset Maps

In some instances, in highly congested areas, even a parent map sheet provides insufficient
detail for BAS purposes. In such cases, rather than using a parent map, the area is depicted
within an inset map (Figure 22). This refers to a map with a very large scale, so that it displays a
smaller area than the parent map sheet, but with greater detail. On the index map, an inset
map is represented by a green outline and is assigned a number preceded by a letter (i.e., A1,
A2, B1, etc.), as shown in Figure 23. Inset maps are only found in areas with many features and
are used less often than parent maps.

Figure 20. Inset Map Displayed on the Index Map

U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

A-3

Figure 21. Inset Map

A4

Scales

Naturally, the map is always smaller than the area it represents, so nearly all maps are
equipped with a scale that depicts the ratio of distance on the map to the actual distance on
land. The scale can be designed any number of ways, but two of the most common scales are
ratio scales, which describe a ratio between the map and the real world (e.g., 1: 24,000), and
bar scales, which depict that relationship graphically by displaying how much a certain distance
on the map represents in the real world (Figure 24). In other words, if a map has a ratio scale of
1: 24,000, it means that one inch on the map represents 24,000 inches on the ground. This
works with any unit of measurement, as long as the unit being used on the map is the same as,
or properly converted from, the unit being depicted on the ground. Often a map will have both
types of scale.

Figure 22. Bar Scale
The map from which this scale was taken has a ratio scale of 1:12,500. The
bar scale shows distances in kilometers and miles.

A bar scale will often be a set length (e.g., one inch), and/or represent a set distance (e.g., one
mile). The bar scale is used to determine distance on the map by using a ruler. Place the ruler
on the map to determine the distance on the map, then place the ruler along the bar scale to
show how much that distance represents on the ground.
U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

A-4

A5

Compass Rose

All maps should have some sort of diagram depicting at least one, but sometimes all, of the
cardinal directions (north, south, east, and west) that the map reader can use to orient the
map. This diagram is called a compass rose (Figure 25). It is important to check the compass
rose when beginning to read a map to determine the direction in which the map is oriented
(i.e., which direction is at the top of the map).

Figure 23. Compass Rose

A6

Legend

Because a map is a graphic representation of a real-world area, it is necessary, and convenient,
to symbolize real world features with representative symbols. In order to describe what each
symbol means, most maps have a legend (Figure 26). Typically, the legend will have a small
example of each symbol (e.g., a line or a picture of a tent), and next to the symbol, in text, a
brief description of what is being depicted (e.g., “road” or “campground”).

Figure 24. Legend Details

Sometimes a map needs to depict multiple features concurrently. This is because some lines are
the boundaries of multiple geographies at the same time (i.e., a county boundary can also be a
city boundary, a voting district boundary, and even a highway or river). Such instances can be
depicted in various ways, but Census Bureau maps depict coincident lines by alternating the
symbols for each type of line as shown in Figure 27. In other words, if a line is both a county
boundary (symbolized by a series of squares) and a city boundary (a series of circles), that
boundary will be depicted as a series of alternating squares and circles for the length of the
concurrency.

U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

A-5

Figure 25. Map Depicting Multiple Features Concurrently

In situations where higher-level geographies (e.g., national, state, county, or county
subdivisions) coincide, the Census Bureau’s maps display only the symbol of the highest-ranking
of these boundaries. In other words, if a particular boundary is shared by both a state and
county, only the symbol representing the state boundary will be displayed.

U.S. Census Bureau

Boundary and Annexation Survey (BAS) Paper How-to Guide

A-6