OMB Control Number: 1910-1400 (Expiration Date: XXXXXX XX, XXXX) | Version 5.x | |||||||||||
DOE F 220.45 | ||||||||||||
Automatic Commercial Ice Makers | Product Type: | Automatic Commercial Ice Makers | Status of This Certification Sheet | No Data | ||||||||
5.x | ||||||||||||
Overall Status of Template | No Data | |||||||||||
Click here for instructions for completing this form | ||||||||||||
Each Importer and U.S. Manufacturer is legally required to certify the compliance of the products it imports, produces, assembles or manufactures. This party is the "Certifier" on this form. This certification may be submitted by the Importer or U.S. manufacturer or by a Third Party Representative. This party is the "Submitter" on this form. |
||||||||||||
Certifier - Party Legally Obligated to Certify Compliance | Submitter - Party Submitting This Report | |||||||||||
The party responsible for certification is (select one only): | The party submitting this report is (select one only): | |||||||||||
Please enter required data | Please enter required data | |||||||||||
![]() |
||||||||||||
Certifier Contact Information | Third Party Representative Contact Information, if Applicable | |||||||||||
Full Legal Name of Individual | Please enter required data | Full Legal Name of Individual | Please enter required data | |||||||||
Full Legal Name of Company | Please enter required data | Full Legal Name of Company | Please enter required data | |||||||||
Complete Company Mailing Address | Please enter required data | Complete Company Mailing Address | Please enter required data | |||||||||
Phone Number | Please enter required data | Phone Number | Please enter required data | |||||||||
Email Address | Please enter required data | Email Address | Please enter required data | |||||||||
Compliance Statement | ||||||||||||
Select one of the options for 'Submitter - Party Submitting This Report' above | ||||||||||||
Submitter Signature (Type your Full Legal Name) | Please enter required data | Date (MM/DD/YYYY) | Please enter required data | |||||||||
OMB Control Number: 1910-1400 (Expiration Date: XXXXXX XX, XXXX) | ||||||||||||
Paperwork Reduction Act Statement | ||||||||||||
OMB Burden Disclosure Statement | ||||||||||||
This data is being collected for manufacturers to certify compliance to DOE's energy conservation, water conservation, or design standards. The data you supply will be used by the Department to monitor compliance with the energy conservation, water conservation, and design standards and testing requirements for the consumer products and commercial and industrial equipment mandated by the Energy Policy and Conservation Act, as amended. Public reporting burden for this collection of information is estimated to average 35 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Office of the Chief Information Officer, Records Management Division, IM-23, Paperwork Reduction Project (1910-1400), U.S. Department of Energy, 1000 Independence Ave SW, Washington, DC, 20585-1290; and to the Office of Management and Budget (OMB), OIRA, Paperwork Reduction Project (1910-1400), Washington, DC 20503. Notwithstanding any other provision of the law, no person is required to respond to, nor shall any person be subject to a penalty for failure to comply with a collection of information subject to the requirements of the Paperwork Reduction Act unless that collection of information displays a currently valid OMB control number. Submission of this data is mandatory. |
Automatic Commercial Ice Makers - v5.x | |||||||||||||||||
Column Headers: | Status | Manufacturer | Brand Name(s) | Basic Model Number | Individual Model Number Covered by Basic Model | Action | Product Group Code | Sample Size (Number of Units Tested) | Is the Certification for this Basic Model Based on a Waiver of DOE's Test Procedure Requirements? | Date of Test Procedure Waiver, if Applicable | Is the Certification based upon any Exception Relief from an Applicable Standard by DOE's Office of Hearing and Appeals? | Date of Exception Relief, if Applicable | Energy Use (kWh/100 lbs Ice) | Condenser Water Use, if Applicable (gal/100 lbs Ice) | Harvest Rate (lbs Ice/24 hours) | Type of Cooling | Equipment Type |
Pop-Up Headers: | Status | Manufacturer | Brand Name(s) | Basic Model Number | Individual Model Number | Action | Product Group Code | Sample Size | Certification Based on Waiver? | Date of Waiver, if Applicable | Cert. Based on Exception Relief? | Date of Relief, if Applicable | Energy Use | Condenser Water Use | Harvest Rate | Type of Cooling | Equipment Type |
Pop-Up Contents | The cells below show whether there are any issues with the data on that line. If the status is "ok," there are no issues. If the status is "Error," there are issues with the data. See columns to the right for an indication of the issues with the data. | Enter the Manufacturer name in the cells below. | Enter the Brand Name(s) in the cells below. | Enter the Basic Model Number in the cells below. | Enter the Individual Model Number covered by the Basic Model in the cells below. | Enter one of following in cells below: N new model D discontinued model C correction to previous CCMS submission E submit report on existing (carryover) model F failed Industry Certification Program . |
Enter an integer between 1 and 35 in the cells below. See the Product Group Codes worksheet for details on product group codes. |
Enter the sample size (number of units tested) in the cells below. This should be an integer greater than zero. | Answer whether the certification for the basic model was based on a waiver of DOE's test procedure requirements in the cells below. An affirmative answer can be either 'yes' or 'y' and a negative answer can be either 'no' or 'n'. . |
If you enter 'yes' under "Is the certification for this basic model based on a waiver of DOE's test procedure requirements?", enter the date of the waiver in the cells below. The entry should be in the M/D/YYYY format. . |
Answer whether the certification was based upon any exception relief from an applicable standard by DOE's Office of Hearing and Appeals in the cells below. An affirmative answer can be either 'yes' or 'y' and a negative answer can be either 'no' or 'n'. |
If you enter 'yes' under "Is the certification based upon any exception relief from an applicable standard by DOE's Office of Hearing and Appeals?", enter the date of the exception relief in the cells below. The entry should be in the M/D/YYYY format. | Enter the Energy Use in kilowatt-hours per 100 pounds of ice in the cells below. This should be a decimal number greater than zero. | For water-cooled models only, enter the Condenser Water Use in gallons per 100 pounds of ice in the cells below. This should be a number greater than zero. No entry should be made for air-cooled models. |
Enter the Harvest Rate in pounds of ice per 24 hours in the cells below. This should be a decimal number greater than zero. . |
Enter either Water or Air in the cells below. | Enter one of the following for Equipment Type in the cells below: IMH - Ice Making Head RC - Remote Condensing (but not Remote Compressor) RCRC - Remote Condensing and Remote Compressor SC - Self-Contained |
The following is a description of each product group code: | ||||
Product Group Code | Batch or Continuous | Equipment Type | Type of Cooling | Harvest Rate (lbs ice/24 hours) |
1 | Batch | Ice-Making Head | Water | <300 |
2 | Batch | Ice-Making Head | Water | ≥300 and <850 |
3 | Batch | Ice-Making Head | Water | ≥850 and <1,500 |
4 | Batch | Ice-Making Head | Water | ≥1,500 and <2,500 |
5 | Batch | Ice-Making Head | Water | ≥2,500 and <4,000 |
6 | Batch | Ice-Making Head | Air | < 300 |
7 | Batch | Ice-Making Head | Air | ≥ 300 and < 800 |
8 | Batch | Ice-Making Head | Air | ≥ 800 and < 1,500 |
9 | Batch | Ice-Making Head | Air | ≥ 1500 and < 4,000 |
10 | Batch | Remote Condensing (but not Remote Compressor) | Air | < 988 |
11 | Batch | Remote Condensing (but not Remote Compressor) | Air | ≥ 988 and < 4,000 |
12 | Batch | Remote Condensing and Remote Compressor | Air | < 930 |
13 | Batch | Remote Condensing and Remote Compressor | Air | ≥ 930 and < 4,000 |
14 | Batch | Self-Contained | Water | <200 |
15 | Batch | Self-Contained | Water | ≥ 200 and < 2,500 |
16 | Batch | Self-Contained | Water | ≥ 2,500 and < 4,000 |
17 | Batch | Self-Contained | Air | < 110 |
18 | Batch | Self-Contained | Air | ≥ 110 and < 200 |
19 | Batch | Self-Contained | Air | ≥ 200 and < 4,000 |
20 | Continuous | Ice-Making Head | Water | <801 |
21 | Continuous | Ice-Making Head | Water | ≥801 and <2,500 |
22 | Continuous | Ice-Making Head | Water | ≥2,500 and <4,000 |
23 | Continuous | Ice-Making Head | Air | <310 |
24 | Continuous | Ice-Making Head | Air | ≥310 and <820 |
25 | Continuous | Ice-Making Head | Air | ≥820 and <4,000 |
26 | Continuous | Remote Condensing (but not remote compressor) | Air | <800 |
27 | Continuous | Remote Condensing (but not remote compressor) | Air | ≥800 and <4,000 |
28 | Continuous | Remote Condensing and Remote Compressor | Air | <800 |
29 | Continuous | Remote Condensing and Remote Compressor | Air | ≥800 and <4,000 |
30 | Continuous | Self-Contained | Water | <900 |
31 | Continuous | Self-Contained | Water | ≥900 and <2,500 |
32 | Continuous | Self-Contained | Water | ≥2,500 and <4,000 |
33 | Continuous | Self-Contained | Air | <200 |
34 | Continuous | Self-Contained | Air | ≥200 and <700 |
35 | Continuous | Self-Contained | Air | ≥700 and <4,000 |
File Type | application/vnd.openxmlformats-officedocument.spreadsheetml.sheet |
File Modified | 0000-00-00 |
File Created | 0000-00-00 |