Body Armor Ballistic BA model application

National Institute of Justice Compliance Testing Program

NIJ_BA_CTP_Ballistic_Body_Armor_Model_Application__Build_Sheet_Draft_-_5-12-08_Rev_010

Body Armor Compliance Testing Program

OMB: 1121-0321

Document [doc]
Download: doc | pdf

Approved: OMB No. 1121-0321 NIJ BA CTP Ballistic Body Armor Application & Build Sheet: 002

Expires: xx/xx/xxxx Revision: 010

Date: 5-12-2008

Ballistic Body Armor Model Application


This application must be completed for each armor model and submitted to the NIJ Compliance Testing Program (CTP) Manager at the National Law Enforcement and Corrections Technology Center (NLECTC - National) via mail to 2277 Research Blvd., MS 8J, Rockville, MD 20850 or email to [email protected]. Upon receipt of the completed application, NLECTC - National will issue a test identification number for this model via email to the applicant.



Applicant Name:



Listed Company


Identify the name(s) of the company under which the model will be listed on the NIJ Compliant Products List.


Name:

Address:

Telephone: Fax:

If there is more than one listed company, please provide above information on a separate page.



Manufacturing Locations


List each manufacturing facility address at which the model will be produced:


1

2

3


Model Information


Model Type: Flexible Accessory Panel(s) Hard Armor


Threat Level: IIA II IIIA III IV


Flexible Armor Threat Levels IIA – IIIA


Armor Sample Sizes:

Please indicate the maximum and minimum template sizes to which this model will be produced.



Select

Size

NIJ Template

Largest

NIJ-C-5

Large

NIJ-C-4

Medium

NIJ-C-3

Small

NIJ-C-2

Smallest

NIJ-C-1



Shot-to-Edge Distance: (NIJ Standard – 0101.06 Figure 3.)


IIA (9mm): 2” 1” Other

IIA (.40 S&W): 3” 2” 1” Other


II (9mm): 2” 1” Other

II (.357 Magnum): 3” 2” 1” Other


IIIA (.357 SIG): 2” 1” Other

IIIA (.44 Magnum): 3” 2” 1” Other



Flexible Armor: (NIJ Standard – 0101.06 Figure 4.)


III (7.62 mm NATO): 3” 2” 1” Other


IV (30.06 M2 AP): 3” 2” 1” Other



Accessory Panels Levels IIA – IIIA: (24 shots are required with a maximum of 6 shots per panel allowed. NIJ Standard)


Shots per Panels: ____

Number of Panels: _____________





Hard Armor


Type III Armor:

P-BFS Test:

(24 shots are required with a maximum of 6 shots per panel. The maximum size of panel for testing is 10” x 12”.)


Shots per Panel: ____________

Number of Panels: _____________


Ballistic Limit Test:

(24 shots are required with a maximum of 6 shots per panel. The maximum size of panel for testing is 10” x 12”.)


Shots per Panel: ____________

Number of Panels: _____________


Type IV Armor:

P-BFS Test:

(24 shots are required with a maximum of 6 shots per panel. The maximum size of panel for testing is 10” x 12”.)


Shots per Panel: ____________

Number of Panels: _____________


Ballistic Limit Test:

(12 shots are required with a maximum of 6 shots per panel. The maximum size of panel for testing is 10” x 12”.)


Shots per Panel: ____________

Number of Panels: _____________


5.3 Body Armor Build Sheet Template

File Typeapplication/msword
File TitleBallistic Body Armor Model Application
Authorjamesr6
Last Modified ByLynn Bryant
File Modified2009-09-28
File Created2009-09-28

© 2024 OMB.report | Privacy Policy