Form 16-1-3511 U.S. Producer Questionnaire

Information collections for import injury investigations (producers, importers, purchasers, and foreign producer questionnaires and institution notices for 5-year reviews)

US producer questionnaire WSSPP

Welded Stainless Steel Pressure Pipe from India, Inv. No. 701-TA-548 and 731-TA-1298 (Final)

OMB: 3117-0016

Document [pdf]
Download: pdf | pdf
OMB No. 3117-0016/USITC No. 16-1-3511; Expiration Date: 6/30/2017
(No response is required if currently valid OMB control number is not displayed)

U.S. PRODUCERS’ QUESTIONNAIRE
WELDED STAINLESS STEEL PRESSURE PIPE FROM INDIA
This questionnaire must be received by the Commission by July 21, 2016
See last page for filing instructions.
The information called for in this questionnaire is for use by the United States International Trade Commission in
connection with its countervailing duty and antidumping investigations concerning welded stainless steel pressure pipe
from India (Inv. Nos. 701-TA-548 and 731-TA-1298 (Final)). The information requested in the questionnaire is requested
under the authority of the Tariff Act of 1930, title VII. This report is mandatory and failure to reply as directed can result
in a subpoena or other order to compel the submission of records or information in your firm’s possession (19 U.S.C. §
1333(a)).

Name of firm
Address
City

State

Zip Code

Website
Has your firm produced welded stainless steel pressure pipe (as defined on next page) at any time since January
1, 2013?

NO

(Sign the certification below and promptly return only this page of the questionnaire to the Commission)

YES

(Complete all parts of the questionnaire, and return the entire questionnaire to the Commission)

Return questionnaire via the U.S. International Trade Commission Drop Box by clicking on the
following link: https://dropbox.usitc.gov/oinv/. (PIN: SSPP)
CERTIFICATION

I certify that the information herein supplied in response to this questionnaire is complete and correct to the best of my
knowledge and belief and understand that the information submitted is subject to audit and verification by the Commission. By
means of this certification I also grant consent for the Commission, and its employees and contract personnel, to use the
information provided in this questionnaire and throughout this proceeding in any other import-injury proceedings conducted by
the Commission on the same or similar merchandise.
I, the undersigned, acknowledge that information submitted in response to this request for information and throughout this
investigation or other proceeding may be disclosed to and used: (i) by the Commission, its employees and Offices, and contract
personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits,
reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C.
Appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. I understand that all
contract personnel will sign appropriate nondisclosure agreements
Name of Authorized Official

Title of Authorized Official

Date

Phone:
Signature

Fax:

Email address

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 2

PART I.—GENERAL INFORMATION
Background. This proceeding was instituted in response to a petition filed on September 30, 2015, by
Bristol Metals, LLC, Bristol, TN; Felker Brothers Corp., Marshfield, WI; Marcegaglia USA, Munhall, PA;
and Outokumpu Stainless Pipe, Inc., Wildwood, FL. Countervailing and antidumping duties may be
assessed on the subject imports as a result of these proceedings if the Commission makes an affirmative
determination of injury, threat, or material retardation, and if the U.S. Department of Commerce makes
an affirmative determination of subsidization and dumping. Questionnaires and other information
pertinent to this proceeding are available at. Questionnaires and other information pertinent to this
proceeding are available
at https://www.usitc.gov/investigations/title_7/2016/welded_stainless_steel_pressure_pipe_india/final
.htm.
Welded stainless steel pressure pipe covered by these investigations is circular welded austenitic
stainless pressure pipe not greater than 14 inches in outside diameter. References to size are in nominal
inches and include all products within tolerances allowed by pipe specifications. This merchandise
includes, but is not limited to, the American Society for Testing and Materials (‘‘ASTM’’) A–312 or ASTM
A–778 specifications, or comparable domestic or foreign specifications. ASTM A–358 products are only
included when they are produced to meet ASTM A–312 or ASTM A–778 specifications, or comparable
domestic or foreign specifications.
Excluded from the scope of the investigation are: (1) Welded stainless mechanical tubing, meeting ASTM
A–554 or comparable domestic or foreign specifications; (2) boiler, heat exchanger, superheater,
refining furnace, feedwater heater, and condenser tubing, meeting ASTM A–249, ASTM A–688 or
comparable domestic or foreign specifications; and (3) specialized tubing, meeting ASTM A–269,
ASTM A–270 or comparable domestic or foreign specifications.
The subject imports are normally classified in subheadings 7306.40.5005, 7306.40.5040, 7306.40.5062,
7306.40.5064, and 7306.40.5085 of the Harmonized Tariff Schedule of the United States (‘‘HTSUS’’).
They may also enter under HTSUS subheadings 7306.40.1010, 7306.40.1015, 7306.40.5042,
7306.40.5044, 7306.40.5080, and 7306.40.5090. The HTSUS subheadings are provided for convenience
and customs purposes only; the written description of the scope of this investigation is dispositive.
Reporting of information.-- If information is not readily available from your records, provide carefully
prepared estimates. If your firm is completing more than one questionnaire (i.e., a producer, importer,
and/or purchaser questionnaire), you need not respond to duplicated questions.
Confidentiality.--The commercial and financial data furnished in response to this questionnaire that
reveal the individual operations of your firm will be treated as confidential by the Commission to the
extent that such data are not otherwise available to the public and will not be disclosed except as may
be required by law (see 19 U.S.C. § 1677f). Such confidential information will not be published in a
manner that will reveal the individual operations of your firm; however, general characterizations of
numerical business proprietary information (such as discussion of trends) will be treated as confidential
business information only at the request of the submitter for good cause shown.
Verification.--The information submitted in this questionnaire is subject to audit and verification by the
Commission. To facilitate possible verification of data, please keep all files, worksheets, and supporting
documents used in the preparation of the questionnaire response. Please also retain a copy of the final
document that you submit.

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 3

Release of information.--The information provided by your firm in response to this questionnaire, as
well as any other business proprietary information submitted by your firm to the Commission in
connection with this proceeding, may become subject to, and released under, the administrative
protective order provisions of the Tariff Act of 1930 (19 U.S.C. § 1677f) and section 207.7 of the
Commission’s Rules of Practice and Procedure (19 CFR § 207.7). This means that certain lawyers and
other authorized individuals may temporarily be given access to the information for use in connection
with this proceeding or other import-injury proceedings conducted by the Commission on the same or
similar merchandise; those individuals would be subject to severe penalties if the information were
divulged to unauthorized individuals.

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe
I-1a.

Page 4

OMB statistics.--Please report below the actual number of hours required and the cost to your
firm of completing this questionnaire.
Hours

Dollars

The questions in this questionnaire have been reviewed with market participants to ensure that
issues of concern are adequately addressed and that data requests are sufficient, meaningful,
and as limited as possible. Public reporting burden for this questionnaire is estimated to average
50 hours per response, including the time for reviewing instructions, gathering data, and
completing and reviewing the questionnaire.
We welcome comments regarding the accuracy of this burden estimate, suggestions for
reducing the burden, and any suggestions for improving this questionnaire. Please attach such
comments to your response or send to the Office of Investigations, USITC, 500 E St. SW,
Washington, DC 20436.

I-1b.

TAA information release.--In the event that the U.S. International Trade Commission (USITC)
makes an affirmative final determination in this proceeding, do you consent to the USITC's
release of your contact information (company name, address, contact person, telephone
number, email address) appearing on the front page of this questionnaire to the Departments of
Commerce, Labor, and Agriculture, as applicable, so that your firm and its workers can be made
eligible for benefits under the Trade Adjustment Assistance program?
Yes

I-2.

No

Establishments covered.--Provide the city, state, zip code, and brief description of each
establishment covered by this questionnaire. If your firm is publicly traded, please specify the
stock exchange and trading symbol in the footnote to the table. Firms operating more than one
establishment should combine the data for all establishments into a single report.
“Establishment”--Each facility of a firm involved in the production of welded stainless steel
pressure pipe, including auxiliary facilities operated in conjunction with (whether or not
physically separate from) such facilities.
Establishments
covered1

City, State

Zip (5 digit)

Description

1
2
3
4
5
6
1

Additional discussion on establishments consolidated in this questionnaire:

.

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe
I-3.

Page 5

Petition support.--Does your firm support or oppose the petition?
Country

Support

Oppose

Take no position

India (antidumping)
India (countervailing duty)
I-4.

Ownership.--Is your firm owned, in whole or in part, by any other firm?
No

Firm name

I-5.

Address

Extent of
ownership
(percent)

Related importers/exporters.--Does your firm have any related firms, either domestic or
foreign, that are engaged in importing welded stainless steel pressure pipe from India into the
United States or that are engaged in exporting welded stainless steel pressure pipe from India to
the United States?
No
Firm name

I-6.

Yes--List the following information.

Yes--List the following information.
Address

Affiliation

Related producers.--Does your firm have any related firms, either domestic or foreign, that are
engaged in the production of welded stainless steel pressure pipe?
No
Firm name

Yes--List the following information.
Address

Affiliation

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 6

PART II.--TRADE AND RELATED INFORMATION
Further information on this part of the questionnaire can be obtained from Michael Szustakowski (202205-3169, [email protected]). Supply all data requested on a calendar-year basis.
II-1.

Contact information.-- Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in part II.
Name
Title
Email
Telephone
Fax

II-2.

Changes in operations.--Please indicate whether your firm has experienced any of the following
changes in relation to the production of welded stainless steel pressure pipe since January 1,
2013.
(check as many as appropriate)
plant openings
plant closings
relocations
expansions
acquisitions
consolidations
prolonged shutdowns or
production curtailments
revised labor agreements
other (e.g., technology)

(If checked, please describe; leave blank if not applicable)

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe
II-3a.

Page 7

Production using same machinery.-- Please report your firm’s production of products made on
the same equipment and machinery used to produce welded stainless steel pressure pipe, and
the combined production capacity on this shared equipment and machinery in the periods
indicated.
“Overall production capacity” or “capacity” – The level of production that your
establishment(s) could reasonably have expected to attain during the specified periods. Assume
normal operating conditions (i.e., using equipment and machinery in place and ready to
operate; normal operating levels (hours per week/weeks per year) and time for downtime,
maintenance, repair, and cleanup).
“Production” – All production in your U.S. establishment(s), including production consumed
internally within your firm and production for another firm under a toll agreement.
Quantity (in short tons)
Calendar years
Item

2013

2014

January-March
2015

2015

2016

Overall production capacity
Production of:
Welded stainless steel
pressure pipe ≤ 14”1

0

0

0

0

0

0

0

0

0

0

Welded stainless steel
pressure pipe > 14”
Excluded tubing (ASTM 534/
249/ 688/ 269/ 270)
All other products2
All products
1

Data entered for production of welded stainless steel pressure pipe will populate here once reported
in question II-7.
2
Please identify these products:
.

II-3b.

Operating parameters.--The production capacity reported in II-3a is based on operating
hours
per week,
weeks per year. Please explain the basis on which you have determined these
operating parameters.

II-3c.

Capacity calculation.--Please describe the methodology used to calculate overall production
capacity reported in II-3a, and explain any changes in reported capacity.

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 8

II-3d.

Production constraints.--Please describe the constraint(s) that set the limit(s) on your firm’s
production capacity.

II-3e.

Product shifting.—
(i)

Is your firm able to switch production (capacity) between welded stainless steel pressure
pipe and other products using the same equipment and/or labor?
No

(ii)

II-4.

Yes-- (i.e., have produced other products or are able to produce other
products). Please identify other actual or potential products:
.

Please describe the factors that affect your firm’s ability to shift production capacity
between products (e.g., time, cost, relative price change, etc.), and the degree to which
these factors enhance or constrain such shifts.

Tolling.--Since January 1, 2013, has your firm been involved in a toll agreement regarding the
production of welded stainless steel pressure pipe?
“Toll agreement”--Agreement between two firms whereby the first firm furnishes the raw
materials and the second firm uses the raw materials to produce a product that it then returns
to the first firm with a charge for processing costs, overhead, etc.
No

Yes--Please describe the toll arrangement(s) and name the firm(s) involved

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe
II-5.

Page 9

Foreign trade zones.-Firm's FTZ operations.--Does your firm produce welded stainless steel pressure pipe in
and/or admit welded stainless steel pressure pipe into a foreign trade zone (FTZ)?

(a)

“Foreign trade zone” is a designated location in the United States where firms utilize
special procedures that allow delayed or reduced customs duty payments on foreign
merchandise. A foreign trade zone must be designed as such pursuant to the rules and
procedures set forth in the Foreign-Trade Zones Act.
No

Yes--Describe the nature of your firms operations in FTZs and
identify the specific FTZ site(s).

Other firms' FTZ operations.--To your knowledge, do any firms in the United States
import welded stainless steel pressure pipe into a foreign trade zone (FTZ) for use in
distribution of welded stainless steel pressure pipe and/or the production of
downstream articles?

(b)

No/Don’t know

II-6.

Yes--Identify the firms and the FTZs.

Importer.--Since January 1, 2013, has your firm imported welded stainless steel pressure pipe?
“Importer” – The person or firm primarily liable for the payment of any duties on the
merchandise, or an authorized agent acting on his behalf. The importer may be the consignee,
or the importer of record.
No

Yes--COMPLETE AND RETURN A U.S. IMPORTERS’ QUESTIONNAIRE

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe
II-7.

Page 10

Production, shipment and inventory data.--Report your firm’s production capacity, production,
shipments, and inventories related to the production of welded stainless steel pressure pipe in
its U.S. establishment(s) during the specified periods.
“Average production capacity” or “capacity” – The level of production that your
establishment(s) could reasonably have expected to attain during the specified periods. Assume
normal operating conditions (i.e., using equipment and machinery in place and ready to
operate; normal operating levels (hours per week/weeks per year) and time for downtime,
maintenance, repair, and cleanup; and a typical or representative product mix).
“Production” – All production in your U.S. establishment(s), including production consumed
internally within your firm and production for another firm under a toll agreement.
“U.S. commercial shipments” –Shipments made within the United States as a result of an arm’s
length commercial transaction in the ordinary course of business. Report net values (i.e., gross
sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned
goods) in U.S. dollars, f.o.b. your point of shipment.
“Internal consumption” – Product consumed internally by your firm.
“Transfers to related firms” –Shipments made to related domestic firms. Such transactions are
valued at fair market value.
“Related firm” –A firm that your firm solely or jointly owns, manages, or otherwise controls.
Such transactions are valued at fair market value.
“Export shipments” –Shipments to destinations outside the United States, including shipments
to related firms.
“Inventories”— Finished goods inventory, not raw materials or work-in-progress.
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records
used in the preparation of the trade data, as Commission staff may contact your firm regarding
questions on the trade data. The Commission may also request that your company submit copies
of the supporting documents/records (such as production and sales schedules, inventory records,
etc.) used to compile these data.

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 11

Production, shipment and inventory data.--

II-7.

Quantity (in short tons) and value (in $1,000)
Calendar years
Item

2013

2014

January-March
2015

2015

2016

1

Average production capacity (quantity) (A)
Beginning-of-period inventories (quantity)
(B)
Production (quantity) (C)
U.S. shipments:
Commercial shipments:
Quantity (D)
Value (E)
Internal consumption:
Quantity (F)
2

Value (G)
Transfers to related firms:
Quantity (H)
2

Value (I)
Export shipments:
Quantity (J)

3

Value (K)
4

End-of-period inventories (quantity) (L)
1

The production capacity reported is based on operating
hours per week,
weeks per year. Please describe the
methodology used to calculate production capacity, and explain any changes in reported capacity
.
2
Internal consumption and transfers to related firms must be valued at fair market value. In the event that your firm
uses a different basis for valuing these transactions, please specify that basis (e.g., cost, cost plus, etc.) and provide value
.
data using that basis for each of the periods noted above:
3
Identify your firm’s principal export markets:
.

RECONCILIATION OF SHIPMENTS, PRODUCTION, AND INVENTORY.--Generally, the data reported for the end-ofperiod inventories (i.e., line L) should be equal to the beginning-of-period inventories (i.e., line B), plus
production (i.e., line C), less total shipments (i.e., lines D, F, H, and J). Please ensure that any differences are not
due to data entry errors in completing this form, but rather actually reflect your firm’s records; and also provide
any likely explanations for any differences (e.g., theft, loss, damage, record systems issues, etc.) if they exist.
Calendar years

Reconciliation
B + C – D – F – H – J – L = should equal
zero ("0") or provide an explanation.1
1

2013

2014

0

January-March
2015

0

2015

0

2016

0

Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are nonetheless accurate:

0
.

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe
II-8.

Page 12

Channels of distribution.-- Report your firm’s commercial U.S. shipments by channel of
distribution.
Quantity (in short tons) and value (in $1,000)
Calendar years
Item

2013

2014

January-March
2015

2015

2016

Channels of distribution:
Commercial U.S. shipments:
To distributors (quantity) (M)
To end users (quantity) (N)
Calendar years
Reconciliation
M + N – D = zero ("0"), if not revise.

2013

2014
0

January-March
2015

0

2015
0

2016
0

0

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe
II-9.

Page 13

Commercial U.S. shipments by size in 2015.--Please report the quantity (in short tons and feet)
and value (in $1,000s) of your firm’s commercial U.S. shipments of welded stainless steel
pressure pipe for each of the nominal pipe size diameter ranges listed below by grade.
2015
Nominal pipe size

A-312

A-778

Other

1

Total

1” and less
Quantity (feet) (O)

0

Quantity (short tons) (P)

0

Value ($1,000s) (Q)

0

>1” to 2”
Quantity (feet) (R)

0

Quantity (short tons) (S)

0

Value ($1,000s) (T)

0

>2” to 4”
Quantity (feet) (U)

0

Quantity (short tons) (V)

0

Value ($1,000s) (W)

0

>4” to 6”
Quantity (feet) (X)

0

Quantity (short tons) (Y)

0

Value ($1,000s) (Z)

0

>6” to 14”
Quantity (feet) (AA)

0

Quantity (short tons) (AB)

0

Value ($1,000s) (AC)

0

Total
Quantity (feet) (AD)

1

0

0

0

0

Quantity (short tons) (AE)

0

0

0

0

Value ($1,000s) (AF)

0

0

0

0

Please describe:

.

Reconciliations

2015

Quantity (short tons)
Line AE total minus line D in 2015 should
equal zero ("0"), if not revise

0

Value
Line AF total minus line E in 2015 should
equal zero ("0"), if not revise

0

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe
II-9.

Page 14

Employment data.--Report your firm’s employment-related data related to the production of
welded stainless steel pressure pipe and provide any explanation for any trends in these data.
“Production Related Workers” (PRWs) includes working supervisors and all nonsupervisory
workers (including group leaders and trainees) engaged in fabricating, processing, assembling,
inspecting, receiving, storage, handling, packing, warehousing, shipping, trucking, hauling,
maintenance, repair, janitorial and guard services, product development, auxiliary production
for plant’s own use (e.g., power plant), recordkeeping, and other services closely associated with
the above production operations.
Average number employed may be computed by adding the number of employees, both full
time and part time, for the 12 pay periods ending closest to the 15th of the month and divide
that total by 12. For the January to March periods, calculate similarly and divide by 3.
“Hours worked” includes time paid for sick leave, holidays, and vacation time. Include overtime
hours actually worked; do not convert overtime pay to its equivalent in straight time hours.
“Wages paid” –Total wages paid before deductions of any kind (e.g., withholding taxes, old-age
and unemployment insurance, group insurance, union dues, bonds, etc.). Include wages paid
directly by your firm for overtime, holidays, vacations, and sick leave.

Calendar years
Item

2013

2014

January-March
2015

2015

2016

Average number of PRWs
(number)
Hours worked by PRWs
(1,000 hours)
Wages paid to PRWs ($1,000)
Explanation of trends:

II-10.

Related firms.--If your firm reported transfers to related firms in question II-8, please indicate
the nature of the relationship between your firm and the related firms (e.g., joint venture,
wholly owned subsidiary), whether the transfers were priced at market value or by a nonmarket formula, whether your firm retained marketing rights to all transfers, and whether the
related firms also processed inputs from sources other than your firm.

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe
II-11.

Page 15

Purchases.--Other than direct imports, has your firm otherwise purchased welded stainless steel
pressure pipe since January 1, 2013?
“Purchase” – A transaction to buy product from a U.S. corporate entity such as another U.S.
producer, a U.S. distributor, or a U.S. firm that has directly imported the product.
“Direct import” –A transaction to buy from a foreign producer where your firm is the importer
of record or consignee.
No

Yes--Report such purchases below and explain the reasons for your firms'
purchases:

(Quantity in short tons)
Calendar years
Item

2013

2014

January-March
2015

2015

2016

1

Purchases from U.S. importers
of welded stainless steel
pressure pipe from—
India
All other sources2
Purchases from domestic
producers3
Purchases from other sources2
1

Please list the name of the importer(s) from which your firm purchased this product. If your firm’s import
suppliers differ by source, please identify the source for each listed supplier:
.
2
Please list the country(ies) from which this product was imported:
.
3
Please list the name of the producer(s) or U.S. distributor(s) from which your firm purchased this
product:
.

II-12.

Other explanations.--If your firm would like to further explain a response to a question in Part II
that did not provide a narrative box, please note the question number and the explanation in
the space provided below. Please also use this space to highlight any issues your firm had in
providing the data in this section, including but not limited to technical issues with the MS Word
questionnaire.

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 16

PART III.--FINANCIAL INFORMATION
Address questions on this part of the questionnaire to Justin Jee (202-205-3186, [email protected]).
III-1.

Contact information.-- Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in part III.
Name
Title
Email
Telephone
Fax

III-2.

Accounting system.--Briefly describe your firm’s financial accounting system.
A.

When does your firm’s fiscal year end (month and day)?
If your firm’s fiscal year changed during the data-collection period, explain
below:

B.1.

Describe the lowest level of operations (e.g., plant, division, company-wide) for
which financial statements are prepared that include welded stainless steel
pressure pipe:

2.
Does your firm prepare profit/loss statements for welded stainless steel
pressure pipe:
Yes
No
3.
How often did your firm (or parent company) prepare financial statements
(including annual reports, 10Ks)? Please check relevant items below.
Audited,
unaudited,
annual reports,
10Ks,
10 Qs,
Monthly,
quarterly,
semi-annually,
annually
4.
Accounting basis:
GAAP,
cash,
tax, or
other comprehensive
basis of accounting (specify)
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records
used in the preparation of the financial data, as Commission staff may contact your firm
regarding questions on the financial data. The Commission may also request that your company
submit copies of the supporting documents/records (financial statements, including internal
profit-and-loss statements for the division or product group that includes welded stainless steel
pressure pipe, as well as specific statements and worksheets) used to compile these data.

III-3.

Cost accounting system.--Briefly describe your firm’s cost accounting system (e.g., standard
cost, job order cost, etc.).

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 17

III-4.

Allocation basis.--Briefly describe your firm’s allocation basis, if any, for COGS, SG&A, and
interest expense and other income and expenses.

III-5.

Product listing.--Please list the products your firm produced in the facilities in which your firm
produced welded stainless steel pressure pipe, and provide the share of net sales accounted for
by these products in your firm’s most recent fiscal year.
Products

Share of sales

welded stainless steel pressure pipe

%

welded stainless steel pressure pipe > 14” o.d.

%

Excluded tubing (ASTM 554/249/688/269/270)

%
%
%

III-6.

Does your firm purchase inputs (raw materials, labor, energy, or any services) used in the
production of welded stainless steel pressure pipe from any related suppliers (e.g., inclusive of
transactions between related firms, divisions and/or other components within the same
company)?
Yes--Continue to question III-7.

No--Continue to question III-8.

III-7a. Inputs from related suppliers.--Please identify the inputs used in the production of welded
stainless steel pressure pipe that your firm purchases from related suppliers and that are
reflected in table III-9a. For “Share of total COGS” please report this information by relevant
input on the basis of your most recently completed fiscal year. For “Input valuation” please
describe the basis, as recorded in your company’s own accounting system, of the purchase cost
from the related supplier; e.g., the related supplier’s actual cost, cost plus, negotiated transfer
price to approximate fair market value.
Input

Related supplier

Share of total COGS

Input valuation as recorded in the firm’s accounting books and records

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 18

III-7b. Inputs purchased from related suppliers.--Please confirm that the inputs purchased from
related suppliers, as identified in III-7a, were reported in III-9a (financial results on welded
stainless steel pressure pipe) in a manner consistent with your firm’s accounting books and
records.
Yes
No--In the space below, please report the valuation basis of inputs purchased from related
suppliers as reported in table III-9a.

III-8.

Surcharges paid on inputs.--Please explain if your firm links the surcharges paid for stainless
steel sheet to those your firm might charge for welded stainless steel pressure pipe. In the
space below, please explain in detail how your company passes the surcharges paid for stainless
steel sheet or coil to welded stainless steel pressure pipe.

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 19

III-9a. Operations on welded stainless steel pressure pipe.--Report the revenue and related cost
information requested below on the welded stainless steel pressure pipe operations of your
firm’s U.S. establishment(s).1 Do not report resales of products. Note that internal consumption
and transfers to related firms must be valued at fair market value. Input purchases from related
suppliers should be consistent with and based on information in the firm’s accounting books and
records. Provide data for your firm’s three most recently completed fiscal years, and for the
specified interim periods. If your firm was involved in tolling operations (either as the toller or as
the tollee), please contact Justin Jee at (202)205-3186 before completing this section of the
questionnaire.
Quantity (in short tons) and value (in $1,000)
Fiscal years ended-Item

2013

2014

January-March

2015

2015

2016

2

Net sales quantities:
Commercial sales (“CS”)
Internal consumption (“IC”)
Transfers to related firms (“Transfers”)
Total net sales quantities

0

0

0

0

0

0

0

0

0

0

Total COGS

0

0

0

0

0

Gross profit or (loss)

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

2

Net sales values:
Commercial sales
Internal consumption
Transfers to related firms
Total net sales values
Cost of goods sold (COGS):
Raw materials

3

Direct labor
Other factory costs

Selling, general, and administrative (SG&A)
expenses:
Selling expenses
General and administrative expenses
Total SG&A expenses
Operating income (loss)
Other expenses and income:
Interest expense
All other expense items
All other income items
Net income or (loss) before income taxes
Depreciation/amortization included above
1

Include only sales (whether domestic or export) and costs related to your U.S. manufacturing operations.
Less discounts, returns, allowances, and prepaid freight. The quantities and values should approximate the corresponding
shipment quantities and values reported in Part II of this questionnaire.
3
COGS (whether for domestic or export sales) should include costs associated with CS, IC, and Transfers.
2

Note -- The table above contains calculations that will appear when you have entered data in the MS
Word form fields.

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 20

III-9b. Financial data reconciliation.--The calculable line items from question III-9a (i.e., total net sales
quantities and values, total COGS, gross profit (or loss), total SG&A, and net income (or loss))
have been calculated from the data submitted in the other line items. Do the calculated fields
return the correct data according to your firm's financial records ignoring non-material
differences that may arise due to rounding?
Yes

No--If the calculated fields do not show the correct data, please double check the
feeder data for data entry errors and revise.
Also, check signs accorded to the post operating income line items; the two
expense line items should report positive numbers (i.e., expenses are
positive and incomes or reversals are negative--instances of the latter
should be rare in those lines) while the income line item also in most
instances should have its value be a positive number (i.e., income is positive,
expenses or reversals are negative).
If after reviewing and potentially revising the feeder data your firm has
provided, the differences between your records and the calculated fields
persist please identify and discuss the differences in the space below.

III-10. Nonrecurring items (charges and gains) included in the subject product financial results.--For
each annual and interim period for which financial results are reported in question III-9a, please
specify all material (significant) nonrecurring items (charges and gains) in the schedule below,
the specific table III-9a line item where the nonrecurring items are included, a brief description
of the relevant nonrecurring items, and the associated values (in $1,000), as reflected in table
III-9a; i.e., if an aggregate nonrecurring item has been allocated to table III-9a, only the allocated
value amount included in table III-9a should be reported in the schedule below. Note: The
Commission’s objective here is to gather information only on material (significant) nonrecurring
items which impacted the reported financial results of the subject product in table III-9a.
Fiscal years ended--

2013

2014

January-March

2015

2015

2016

Nonrecurring item: In this column please provide a brief
Nonrecurring item: In these columns please report the amount of the relevant
description of each nonrecurring item and indicate the
nonrecurring item reported in table III-9a.
specific line item in table III-9a where the nonrecurring item is
classified.
Value ($1,000)
1.

, classified as

2.

, classified as

3.

, classified as

4.

, classified as

5.

, classified as

6.

, classified as

7.

, classified as

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 21

III-11. Classification of identified nonrecurring items (charges and gains) in the accounting books and
records of the company.--If non-recurring items were reported in table III-10 above, please
identify where your company recorded these items in your accounting books and records in the
normal course of business; i.e., just as responses to question III-10 identify where these items
are reported in table III-9a.

III-12. Asset values.--Report the total assets (i.e., both current and long-term assets) associated with
the production, warehousing, and sale of welded stainless steel pressure pipe. If your firm does
not maintain some or all of the specific asset information necessary to calculate total assets for
welded stainless steel pressure pipe in the normal course of business, please estimate this
information based upon a method (such as production, sales, or costs) that is consistent with
relevant cost allocations in table III-9a. Provide data as of the end of your firm’s three most
recently completed fiscal years.
Note: Total assets should reflect net assets after any accumulated depreciation and allowances
deducted.
Total assets should be allocated to the subject products if these assets are also related to other
products. Please provide a brief explanation if there are any substantial changes in total asset
value during the period; e.g., due to asset write-offs, revaluation, and major purchases.
Value (in $1,000)
Fiscal years ended-Item
Total assets (net)
1

III-13.

2013

2014

2015

1

Describe

Capital expenditures and research and development expenses.--Report your firm’s capital
expenditures and research and development expenses for welded stainless steel pressure pipe.
Provide data for your firm’s three most recently completed fiscal years, and for the specified
interim periods.
Value (in $1,000)
Fiscal years ended--

Item

2013

2014

January-March

2015

2015

1

Capital expenditures

2

Research and development expenses
1

Please describe the nature, focus, and significance of your firm’s capital expenditures on the subject
product.
2
Please describe the nature, focus, and significance of your firm’s R&D expenses related to subject
product.

2016

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 22

III-14. Data consistency and reconciliation.--Please indicate whether your firm’s financial data for
questions III-9a, 12, and 13 are based on a calendar year or on your firm’s fiscal year:
Calendar year

Fiscal year

Specify fiscal year

Please note the quantities and values reported in question III-9a should reconcile with the data
reported in question II-7 (including export shipments) as long as they are reported on the same
calendar year basis.
Do these data in question III-9a reconcile with data in question II-7?
Yes

No

If no, please explain.

III-15. Effects of imports on investment.--Since January 1, 2013, has your firm experienced any actual
negative effects on its return on investment or the scale of capital investments as a result of
imports of welded stainless steel pressure pipe from India?
No

Yes--My firm has experienced actual negative effects as follows:
(check as many as appropriate)
Cancellation, postponement,
or rejection of expansion
projects
Denial or rejection of
investment proposal
Reduction in the size of
capital investments
Return on specific
investments negatively
impacted
Other

(please describe)

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 23

III-16. Effects of imports on growth and development.--Since January 1, 2013, has your firm
experienced any actual negative effects on its growth, ability to raise capital, or existing
development and production efforts (including efforts to develop a derivative or more advanced
version of the product) as a result of imports of welded stainless steel pressure pipe from India?
No

Yes--My firm has experienced actual negative effects as follows:
(check as many as appropriate)

(please describe)

Rejection of bank loans

Lowering of credit rating

Problem related to the issue
of stocks or bonds
Ability to service debt

Other

III-17. Anticipated effects of imports.--Does your firm anticipate any negative effects due to imports of
welded stainless steel pressure pipe from India?
No

Yes

If yes, my firm anticipates negative effects as follows:

III-18. Other explanations.--If your firm would like to further explain a response to a question in Part III
that did not provide a narrative box, please note the question number and the explanation in
the space provided below. Please also use this space to highlight any issues your firm had in
providing the data in this section, including but not limited to technical issues with the MS Word
questionnaire.

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 24

PART IV.-- PRICING AND MARKET FACTORS
Further information on this part of the questionnaire can be obtained from Alissa Tafti (202-205-3244,
[email protected]).
IV-1.

Contact information.--Please identify the individual that Commission staff may contact
regarding the confidential information submitted in part IV.
Name
Title
Email
Telephone
Fax

PRICE DATA
IV-2.

This question requests quarterly quantity and value data for your firm’s commercial shipments
to unrelated U.S. customers since January 1, 2013 of the following products produced by your
firm.
Product 1.--ASTM A‐312, welded, grade AISI 304/304L pipe, 1‐inch schedule 40
Product 2.--ASTM A‐312, welded, grade AISI 304/304L pipe, 2‐inch schedule 40
Product 3.--ASTM A‐312, welded, grade AISI 304/304L pipe, 0.5‐inch schedule 10
Product 4.—ASTM A‐312, welded, grade AISI 304/304L pipe, 6‐inch schedule 10

Please note that values should be f.o.b., U.S. point of shipment and should not include U.S.-inland
transportation costs. Values should reflect the final net amount paid to your firm (i.e., should be net
of all deductions for discounts or rebates).
During January 2013-March 2016, did your firm produce and sell to unrelated U.S. customers
any of the above listed products (or any products that were competitive with these products)?
Yes.--Please complete the following pricing data table as appropriate.
No.--Skip to question IV-3.

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe
IV-2.

Page 25

Price data.--Report below the quarterly price data1 for pricing products2 produced and sold by
your firm.

Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value

(Quantity in feet, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value

Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your
firm’s U.S. point of shipment.
2
Pricing product definitions are provided on the first page of Part IV.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a
description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:

Pricing data methodology.—Please describe the method and the kinds of documents/records
that were used to compile your price data.

Note: As requested in Part I of this questionnaire, please keep all supporting documents/records used in
the preparation of the price data, as Commission staff may contact your firm regarding questions on the
price data. The Commission may also request that your company submit copies of the supporting
documents/records (such as sales journal, invoices, etc.) used to compile these data.

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe
IV-3.

Price setting.-- How does your firm determine the prices that it charges for sales of welded
stainless steel pressure pipe (check all that apply)? If your firm issues price lists, please submit
sample pages of a recent list.
Transaction
by
transaction

IV-4.

Contracts

Set
price
lists

Other

If other, describe

Discount policy.-- Please indicate and describe your firm’s discount policies (check all that
apply).

Quantity
discounts

IV-5.

Page 26

Annual
total
volume
discounts

No
discount
policy

Other

Describe

Pricing terms.-(a)

What are your firm’s typical sales terms for its U.S.-produced welded stainless steel
pressure pipe?
Net 30
days

(b)

Net 60
days

2/10 net
30 days

Other

Other (specify)

On what basis are your firm’s prices of domestic welded stainless steel pressure pipe
usually quoted (check one)?
Delivered

F.o.b.

If f.o.b., specify point

Contract versus spot.--Approximately what share of your firm’s sales of its U.S.-produced
welded stainless steel pressure pipe in 2015 was on a (1) long-term contract basis, (2) annual
contract basis, (3) short-term contract basis, and (4) spot sales basis?
Type of sale
Long-term
Short-term
Annual
Total
contracts
contracts
contracts
Spot sales
(should
(multiple
(multiple
(multiple
(for a single
sum to
deliveries for
deliveries for
deliveries for 12
delivery)
100.0%)
more than 12
less than 12
months)
months)
months)
Share of 2015
%
%
%
%
0.0 %
sales

IV-6.

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe
IV-7.

Page 27

Contract provisions.--Please fill out the table regarding your firm’s typical sales contracts for
U.S.-produced welded stainless steel pressure pipe (or check “not applicable” if your firm does
not sell on a long-term, short-term and/or annual contract basis).

Typical sales
contract provisions

Item

Average contract
duration

No. of
days

Price renegotiation
(during contract
period)

Yes

Fixed quantity
and/or price

Short-term contracts
(multiple deliveries
for less than 12
months)

Annual contracts
(multiple
deliveries for 12
months)

Long-term contracts
(multiple deliveries for
more than 12 months)

365

No
Quantity

Meet or release
provision

Price
Both
Yes
No
Yes

Raw material(s)
surcharge

No
If Yes,
Explain

Explain surcharge type

Not applicable
IV-8.

Lead times.--What is your firm’s share of sales from inventory and produced to order and what
is the typical lead time between a customer’s order and the date of delivery for your firm’s sales
of its U.S.-produced welded stainless steel pressure pipe?

Source

Share of 2015 sales

From inventory

%

Produced to order

%

Total (should sum to 100.0%)

0.0 %

Lead time (average
number of days)

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe
IV-9.

Page 28

Shipping information.-(a)

What is the approximate percentage of the total delivered cost of U.S.-produced welded
stainless steel pressure pipe that is accounted for by U.S. inland transportation
costs?
percent

(b)

Who generally arranges the transportation to your firm’s customers’ locations?
Your firm
Purchaser (check one)

(c)

Indicate the approximate percentage of your firm’s sales of welded stainless steel
pressure pipe that are delivered the following distances from its production facility.
Distance from production facility

Share

Within 100 miles

%

101 to 1,000 miles

%

Over 1,000 miles

%

Total (should sum to 100.0%)

0.0

%

IV-10. Geographical shipments.-- In which U.S. geographic market area(s) has your firm sold its U.S.produced welded stainless steel pressure pipe since January 1, 2013 (check all that apply)?
Geographic area

√ if applicable

Northeast.–CT, ME, MA, NH, NJ, NY, PA, RI, and VT.
Midwest.–IL, IN, IA, KS, MI, MN, MO, NE, ND, OH, SD, and WI.
Southeast.–AL, DE, DC, FL, GA, KY, MD, MS, NC, SC, TN, VA, and WV.
Central Southwest.–AR, LA, OK, and TX.
Mountains.–AZ, CO, ID, MT, NV, NM, UT, and WY.
Pacific Coast.–CA, OR, and WA.
Other.–All other markets in the United States not previously listed,
including AK, HI, PR, and VI.
IV-11. End uses.--List the end uses of the welded stainless steel pressure pipe that your firm
manufactures. For each end-use product, what percentage of the total cost is accounted for by
welded stainless steel pressure pipe and other inputs?
Share of total cost of end use product
accounted for by

End use product

welded stainless
steel pressure pipe

Total
(should sum to
100.0% across)

Other inputs

%

%

0.0 %

%

%

0.0 %

%

%

0.0 %

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 29

IV-12. Substitutes.-- Can other products be substituted for welded stainless steel pressure pipe?
No

Yes--Please fill out the table.

End use in which this
substitute is used

Substitute

Have changes in the price of this substitute
affected the price for welded stainless steel
pressure pipe?
No Yes

Explanation

1.
2.
3.
IV-13. Demand trends.-- Indicate how demand within the United States and outside of the United
States (if known) for welded stainless steel pressure pipe has changed since January 1, 2013. Explain any
trends and describe the principal factors that have affected these changes in demand.

Market

Overall
increase

Fluctuate
No
Overall
with no
change decrease clear trend

Explanation and factors

Within
the United
States
Outside
the United
States

IV-14. Product changes.--Have there been any significant changes in the product range, product mix,
or marketing of welded stainless steel pressure pipe since January 1, 2013?
No

Yes

If yes, please describe and quantify if possible.

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 30

IV-15. Conditions of competition.-(a) Is the welded stainless steel pressure pipe market subject to business cycles (other than
general economy-wide conditions) and/or other conditions of competition distinctive to
welded stainless steel pressure pipe? If yes, describe.
Check all that apply.

Please describe.

No

Skip to question IV-16.

Yes-Business cycles (e.g.
seasonal business)
Yes-Other distinctive
conditions of competition
(b) If yes, have there been any changes in the business cycles or conditions of competition for
welded stainless steel pressure pipe since January 1, 2013?
No

Yes

If yes, describe.

(c) Describe any changes in demand in the oil and gas market that have affected changes in
demand for WSSPP in the U.S. market.

IV-16. Supply constraints.--Has your firm refused, declined, or been unable to supply welded stainless
steel pressure pipe since January 1, 2013 (examples include placing customers on allocation or
“controlled order entry,” declining to accept new customers or renew existing customers,
delivering less than the quantity promised, been unable to meet timely shipment commitments,
etc.)?
No

Yes

If yes, please describe.

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 31

IV-17. Raw materials.—
(a) How have prices for the raw materials used in the production of welded stainless steel pressure
pipe changed since January 1, 2013?
Fluctuate
Explain, noting how raw material price changes
Overall
No
Overall
with no
have affected your firm’s selling prices for welded
increase change decrease clear trend
stainless steel pressure pipe.

(b) Have prices for the raw materials used in the production of welded stainless steel pressure pipe
affected your firm’s pricing since January 1, 2013?

No

Yes

If yes, please explain, specifically addressing the impact of each of the
following raw materials listed below.

Nickel
Chromium
Molybdenum
Other
(c) Since January 1, 2013, has your firm charged customers surcharges on sales of welded stainless
steel pressure pipe due to raw material price increases?
No

Yes

If yes, please indicate the raw materials and time periods.

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 32

IV-18. Interchangeability.--Is welded stainless steel pressure pipe produced in the United States and in
other countries interchangeable (i.e., can they physically be used in the same applications)?
Please indicate A, F, S, N, or 0 in the table below:
A = the products from a specified country-pair are always interchangeable
F = the products are frequently interchangeable
S = the products are sometimes interchangeable
N = the products are never interchangeable
0 = no familiarity with products from a specified country-pair
Country-pair

India

Korea

Taiwan

Other countries

United States
India
Korea
Taiwan
For any country-pair producing welded stainless steel pressure pipe that is sometimes or never
interchangeable, identify the country-pair and explain the factors that limit or preclude
interchangeable use:

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 33

IV-19. Factors other than price.--Are differences other than price (e.g., quality, availability,
transportation network, product range, technical support, etc.) between welded stainless steel
pressure pipe produced in the United States and in other countries a significant factor in your
firm’s sales of the products?
Please indicate A, F, S, N, or 0 in the table below:
A = such differences are always significant
F = such differences are frequently significant
S = such differences are sometimes significant
N = such differences are never significant
0 = no familiarity with products from a specified country-pair
Country-pair

India

Korea

Taiwan

Other countries

United States
India
Korea
Taiwan
For any country-pair for which factors other than price always or frequently are a significant
factor in your firm’s sales of welded stainless steel pressure pipe, identify the country-pair and
report the advantages or disadvantages imparted by such factors:

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 34

IV-20. Customer identification.--List the names and contact information for your firm’s 10 largest U.S.
customers for welded stainless steel pressure pipe since January 1, 2013. Indicate the share of
the quantity of your firm’s total shipments of welded stainless steel pressure pipe that each of
these customers accounted for in 2015.
Customer’s name
1
2
3
4
5
6
7
8
9
10

City

State

Share of 2015 sales (%)

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 35

IV-21. Competition from imports
(a)

Lost revenue.--Since January 1, 2013: To avoid losing sales to competitors selling
welded stainless steel pressure pipe from India, did your firm:
No
Yes
Reduce prices
Roll back announced price increases

(b)

Lost sales.--Since January 1, 2013: Did your firm lose sales of welded stainless steel
pressure pipe to imports of this product from India?
No

Yes

IV-22. Other explanations.--If your firm would like to further explain a response to a question in Part
IV that did not provide a narrative response box, please note the question number and the
explanation in the space provided below. Please also use this space to highlight any issues your
firm had in providing the data in this section, including but not limited to technical issues with
the MS Word questionnaire.

Business Proprietary
U.S. Producers’ Questionnaire - Welded Stainless Steel Pressure Pipe

Page 36

HOW TO FILE YOUR QUESTIONNAIRE RESPONSE
This questionnaire is available as a “fillable” form in MS Word format on the
Commission’s website
at: https://www.usitc.gov/investigations/title_7/2016/welded_stainless_steel_pressure
_pipe_india/final.htm
Please do not attempt to modify the format or permissions of the questionnaire
document. Please submit the completed questionnaire using one of the methods noted
below. If your firm is unable to complete the MS Word questionnaire or cannot use one
of the electronic methods of submission, please contact the Commission for further
instructions.
• Upload via Secure Drop Box.—Upload the MS Word questionnaire along with a scanned copy of the
signed certification page (page 1) through the Commission’s secure upload facility:
Web address: https://dropbox.usitc.gov/oinv/

Pin: SSPP

• E-mail.—E-mail the MS Word questionnaire to [email protected]; include a scanned copy of the signed
certification page (page 1). Submitters are strongly encouraged to encrypt nonpublic documents that are
electronically transmitted to the Commission to protect your sensitive information from unauthorized
disclosure. The USITC secure drop-box system and the Electronic Document Information System (EDIS)
use Federal Information Processing Standards (FIPS) 140-2 cryptographic algorithms to encrypt data in
transit. Submitting your nonpublic documents by a means that does not use these encryption algorithms
(such as by email) may subject your firm’s nonpublic information to unauthorized disclosure during
transmission. If you choose a non-encrypted method of electronic transmission, the Commission warns
you that the risk of such possible unauthorized disclosure is assumed by you and not by the Commission.
If your firm does not produce this product, please fill out page 1, print, sign, and submit a scanned copy
to the Commission.
Parties to this proceeding.—If your firm is a party to this proceeding, it is required to serve a copy of the
completed questionnaire on parties to the proceeding that are subject to administrative protective
order (see 19 CFR § 207.7). A list of such parties may be obtained from the Commission’s Secretary (202205-1803). A certificate of service must accompany the completed questionnaire you submit (see 19 CFR
§ 207.7). Service of the questionnaire must be made in paper form.


File Typeapplication/pdf
File TitleUS producer questionnaire
SubjectTitle 7 investigations
AuthorChrist, Nannette
File Modified2016-06-13
File Created2016-06-13

© 2024 OMB.report | Privacy Policy