Form 9007 CSAT Top-Screen Instrument

CSAT Top-Screen Instrument

1. Paperwork Reduction Act Statement

In accordance with the Paperwork Reduction Act, no one is required to respond to a collection of information unless it displays a valid Office of Management and Budget (OMB) Control Number. The valid OMB Control Number for this information collection is 1670-0007. The time required to complete this information collection is estimated to average 6 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information.

2. CFATS Exemptions

In this section, the instrument will use yes/no questions and text fields to collect the following CFATS Exemption information:

• Maritime Transportation Security Act (MTSA) of 2002, Public Law 107-295, as amended

• Public Water Systems, as defined by section 1401 of the Safe Drinking Act, 42 U.S.C. 300f

• Treatment Works, as defined in section 212 of the Federal Water Pollution Control Act, 33 U.S.C. 1292

• Owned or Operated by the Department of Defense (DoD)

• Owned or Operated by the Department of Energy (DoE)

• Subject to regulation by the Nuclear Regulatory Commission (NRC) or by a State pursuant to agreement between the State and NRC under 42 U.S.C. 2021(b)

3. Facility Attributes

In this section, the instrument will use selection questions to collect the following information:

• If the facility is located in an urban or rural area

• Whether or not the facility manufactures any chemicals

4. Chemical of Interest (COI) Selection

In this section, the instrument will use a selection list to collect the COI from Appendix A at or above the Screen Threshold Quantity the facility possesses or plans to possess.

5. Security Issue Identification

In this section, the instrument will use yes/no questions to collect for each COI identified in section 5 if the COI is at or above the quantity and concentration amount listed in Appendix A for the applicable Sabotage, Theft/Diversion, Release Toxic, Release Flammable, and/or Release Explosive security issue.

6. Sabotage

In this section, the instrument will use yes/no questions and text fields to collect for each Sabotage security issue COI identified in section 6 the following information:

• Single largest quantity and concentration shipped

• The method used to ship

7. Theft Diversion

In this section, the instrument will use yes/no questions, drop down menus, and text fields to collect for each Theft/Diversion security issue COI identified in section 6 the following information:

• Bulk transportation quantity and concentration, if applicable

• Quantity, concentration, and most common container size for non-bulk transportation

• Whether or not the facility ships the COI

8. Release Toxic

In this section, the instrument will use yes/no questions, check boxes, drop down menus, text fields, and a geospatial tool to collect for each Release Toxic security issue COI identified in section 6 the following information:

• Total onsite quantity

• Geospatial location of the area of highest quantity

• Whether or not a motor vehicle can access any part of the area of highest quantity

• If the area of highest quantity is a COI storage area, chemical process area, and/or COI transfer area and transfer equipment

• Replacement cost of equipment within the area of highest quantity

• Specific quantity, concentration, physical state, process/storage temperature, process/storage pressure, design pressure or maximum allowable working pressure, above or below ground storage, and secondary containment located in the area of highest quantity

• Geospatial location of the second largest area of highest quantity, if applicable

• Whether or not a motor vehicle can access any part of the second largest area of highest quantity, if applicable

• If the second largest area of highest quantity is a COI storage area, chemical process area, and/or COI transfer area and transfer equipment, if applicable

• Replacement cost of equipment within the second largest area of highest quantity, if applicable

• Specific quantity, concentration, physical state, process/storage temperature, process/storage pressure, design pressure or maximum allowable working pressure, above or below ground storage, and secondary containment located in the second largest area of highest quantity, if applicable

9. Release Flammable

In this section, the instrument will use yes/no questions, check boxes, drop down menus, text fields, and a geospatial tool to collect for each Release Flammable security issue COI identified in section 6 the following information:

• Total onsite quantity

• Geospatial location of the largest quantity in a single container

• Whether or not a motor vehicle can access any part of 170ft radius around the largest quantity in a single container

• If 170ft radius around the largest quantity is a COI storage area, chemical process area, and/or COI transfer area and transfer equipment

• Replacement cost of equipment within the 170ft radius around the largest quantity in a single container

• NFPA Flammability Hazard Rating, whether or not the Flammable is a fuel and type if applicable, quantity, flow rate, physical state, process/storage temperature, process/storage pressure, design pressure or maximum allowable working pressure, above or below ground storage, and secondary containment for the largest quantity in a single container

• Geospatial location of the second largest quantity in a single container, if applicable

• Whether or not a motor vehicle can access any part of 170ft radius around the second largest quantity in a single container

• If 170ft radius around the second largest quantity in a single container is a COI storage area, chemical process area, and/or COI transfer area and transfer equipment

• Replacement cost of equipment within the 170ft radius around the second largest quantity in a single container

• NFPA Flammability Hazard Rating, whether or not the Flammable is a fuel and type if applicable, quantity, flow rate, physical state, process/storage temperature, process/storage pressure, design pressure or maximum allowable working pressure, above or below ground storage, and secondary containment for the second largest quantity in a single container

10. Release Explosives

In this section, the instrument will use yes/no questions, check boxes, drop down menus, text fields, and a geospatial tool to collect for each Release Explosive security issue COI identified in section 6 the following information:

• Total onsite quantity

• Geospatial location of the highest quantity

• Whether or not a motor vehicle can access any part of the area of highest quantity

• If the area of highest quantity is a COI storage area, chemical process area, and/or COI transfer Area and Transfer Equipment

• Replacement cost of equipment within the area of highest quantity

• Quantity of COI located in the area of highest quantity

• Quantity of other explosives in the area of highest quantity

• Above or below ground storage of COI in the area of highest quantity

• Geospatial location of the second largest area of highest quantity, if applicable

• Whether or not a motor vehicle can access any part of the second largest area of highest quantity

• If the second largest area of highest quantity is a COI storage area, chemical process area, and/or COI transfer Area and Transfer Equipment

• Replacement cost of equipment within the second largest area of highest quantity

• Quantity of COI located in the second largest area of highest quantity

• Quantity of other explosives in the second largest area of highest quantity

• Above or below ground storage of COI in the second largest area of highest quantity